Move lib_$ARCH directories to arch/$ARCH/lib

Also move lib_$ARCH/config.mk to arch/$ARCH/config.mk

This change is intended to clean up the top-level directory structure
and more closely mimic Linux's directory organization.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 0 insertions, 117 deletions

diff --git a/lib_blackfin/memcpy.S b/lib_blackfin/memcpy.S
deleted file mode 100644
index e6b359a344..0000000000
--- a/lib_blackfin/memcpy.S
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * File: memcpy.S
- *
- * Copyright 2004-2007 Analog Devices Inc.
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-.align 2
-
-.globl _memcpy_ASM;
-.type _memcpy_ASM, STT_FUNC;
-_memcpy_ASM:
-	CC = R2 <=  0;	/* length not positive?*/
-	IF CC JUMP  .L_P1L2147483647;	/* Nothing to do */
-
-	P0 = R0 ;	/* dst*/
-	P1 = R1 ;	/* src*/
-	P2 = R2 ;	/* length */
-
-	/* check for overlapping data */
-	CC = R1 < R0;	/* src < dst */
-	IF !CC JUMP .Lno_overlap;
-	R3 = R1 + R2;
-	CC = R0 < R3;	/* and dst < src+len */
-	IF CC JUMP .Lhas_overlap;
-
-.Lno_overlap:
-	/* Check for aligned data.*/
-
-	R3 = R1 | R0;
-	R0 = 0x3;
-	R3 = R3 & R0;
-	CC = R3;	/* low bits set on either address? */
-	IF CC JUMP .Lnot_aligned;
-
-	/* Both addresses are word-aligned, so we can copy
-	at least part of the data using word copies.*/
-	P2 = P2 >> 2;
-	CC = P2 <= 2;
-	IF !CC JUMP .Lmore_than_seven;
-	/* less than eight bytes... */
-	P2 = R2;
-	LSETUP(.Lthree_start, .Lthree_end) LC0=P2;
-	R0 = R1;	/* setup src address for return */
-.Lthree_start:
-	R3 = B[P1++] (X);
-.Lthree_end:
-	B[P0++] = R3;
-
-	RTS;
-
-.Lmore_than_seven:
-	/* There's at least eight bytes to copy. */
-	P2 += -1;	/* because we unroll one iteration */
-	LSETUP(.Lword_loop, .Lword_loop) LC0=P2;
-	R0 = R1;
-	I1 = P1;
-	R3 = [I1++];
-.Lword_loop:
-	MNOP || [P0++] = R3 || R3 = [I1++];
-
-	[P0++] = R3;
-	/* Any remaining bytes to copy? */
-	R3 = 0x3;
-	R3 = R2 & R3;
-	CC = R3 == 0;
-	P1 = I1;	/* in case there's something left, */
-	IF !CC JUMP .Lbytes_left;
-	RTS;
-.Lbytes_left:	P2 = R3;
-.Lnot_aligned:
-	/* From here, we're copying byte-by-byte. */
-	LSETUP (.Lbyte_start , .Lbyte_end) LC0=P2;
-	R0 = R1;	/* Save src address for return */
-.Lbyte_start:
-	R1 = B[P1++] (X);
-.Lbyte_end:
-	B[P0++] = R1;
-
-.L_P1L2147483647:
-	RTS;
-
-.Lhas_overlap:
-/* Need to reverse the copying, because the
- * dst would clobber the src.
- * Don't bother to work out alignment for
- * the reverse case.
- */
-	R0 = R1;	/* save src for later. */
-	P0 = P0 + P2;
-	P0 += -1;
-	P1 = P1 + P2;
-	P1 += -1;
-	LSETUP(.Lover_start, .Lover_end) LC0=P2;
-.Lover_start:
-	R1 = B[P1--] (X);
-.Lover_end:
-	B[P0--] = R1;
-
-	RTS;
-
-.size _memcpy_ASM, .-_memcpy_ASM