diff options
author | Marcel Ziswiler <marcel@ziswiler.com> | 2007-10-19 00:25:33 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2007-10-23 16:40:40 +0200 |
commit | 2a4741d9a14ec475f50e9856d2c0a67e8b4271bd (patch) | |
tree | 3b91abb20ae2fc8230f19e90230f7eea7662a1c0 /include | |
parent | 298cd4cafe81ff8a6c87be8fbc440a20720d3ed6 (diff) |
fix pxa255_idp board
The pxa255_idp being an old unmaintained board showed several issues:
1. CONFIG_INIT_CRITICAL was still defined.
2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined.
3. Symbol flash_addr was undeclared.
4. The boards lowlevel_init function was still called memsetup.
5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000.
6. Using -march=armv5 instead of -march=armv5te resulted in lots of
'target CPU does not support interworking' warnings on recent compilers.
7. The PXA's serial driver redefined FFUART, BTUART and STUART used as
indexes rather than the register definitions from the pxa-regs header
file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to
avoid any ambiguities.
8. There were several redefinition warnings concerning ICMR, OSMR3,
OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file.
9. The board configuration file was rather outdated.
10. The part header file defined the vendor, product and revision arrays
as unsigned chars instead of just chars in the block_dev_desc_t
structure.
Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Diffstat (limited to 'include')
-rw-r--r-- | include/configs/pxa255_idp.h | 13 | ||||
-rw-r--r-- | include/part.h | 6 |
2 files changed, 10 insertions, 9 deletions
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 0e884fc114c..4a9cadbc738 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -38,10 +38,11 @@ #include <asm/arch/pxa-regs.h> /* - * If we are developing, we might want to start armboot from ram + * If we are developing, we might want to start U-Boot from RAM * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ +#undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */ +#undef CONFIG_SKIP_RELOCATE_UBOOT /* define for developing */ /* * define the following to enable debug blinks. A debug blink function @@ -62,6 +63,7 @@ #endif #define CONFIG_MMC 1 +#define CONFIG_DOS_PARTITION 1 #define BOARD_LATE_INIT 1 #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ @@ -121,7 +123,6 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_DHCP - #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTCOMMAND "bootm 40000" #define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" @@ -332,7 +333,7 @@ #define CFG_FLASH_CFI_DRIVER 1 #define CFG_MONITOR_BASE 0 -#define CFG_MONITOR_LEN 0x40000 +#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ @@ -347,7 +348,7 @@ #define CFG_ENV_IS_IN_FLASH 1 /* Addr of Environment Sector */ #define CFG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000) -#define CFG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ -#define CFG_ENV_SECT_SIZE 0x40000 +#define CFG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16) #endif /* __CONFIG_H */ diff --git a/include/part.h b/include/part.h index 29c03205f2d..37b2b6845bc 100644 --- a/include/part.h +++ b/include/part.h @@ -38,9 +38,9 @@ typedef struct block_dev_desc { #endif lbaint_t lba; /* number of blocks */ unsigned long blksz; /* block size */ - unsigned char vendor [40+1]; /* IDE model, SCSI Vendor */ - unsigned char product[20+1]; /* IDE Serial no, SCSI product */ - unsigned char revision[8+1]; /* firmware revision */ + char vendor [40+1]; /* IDE model, SCSI Vendor */ + char product[20+1]; /* IDE Serial no, SCSI product */ + char revision[8+1]; /* firmware revision */ unsigned long (*block_read)(int dev, unsigned long start, lbaint_t blkcnt, |