Merge branch 'master' of git://git.denx.de/u-boot-arm

6 files changed, 491 insertions, 6 deletions

diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h
index bf5c1a12982..a14bfe3a85a 100644
--- a/include/configs/lsxl.h
+++ b/include/configs/lsxl.h
@@ -8,6 +8,8 @@
 #ifndef _CONFIG_LSXL_H
 #define _CONFIG_LSXL_H
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /*
  * Version number information
  */
@@ -157,7 +159,7 @@
 	"standard_env=setenv ipaddr; setenv netmask; setenv serverip; "	\
 		"setenv ncip; setenv gatewayip; setenv ethact; "	\
 		"setenv bootfile; setenv dnsip; "			\
-		"setenv bootsource hdd; run ser\0"			\
+		"setenv bootsource legacy; run ser\0"			\
 	"restore_env=run standard_env; saveenv; reset\0"		\
 	"ser=setenv stdin serial; setenv stdout serial; "		\
 		"setenv stderr serial\0"				\
diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h
new file mode 100644
index 00000000000..a28d7b579a6
--- /dev/null
+++ b/include/configs/ph1_ld4.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2012-2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PH1_XXX_H
+#define __PH1_XXX_H
+
+/*
+ * Support Card Select
+ *
+ *  CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
+ *  CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
+ *                       CPLD is re-programmed for ARIMA board compatibility.
+ *  No define                     - No support card.
+ */
+
+#if 0
+#define CONFIG_PFC_MICRO_SUPPORT_CARD
+#else
+#define CONFIG_DCC_MICRO_SUPPORT_CARD
+#endif
+
+/*
+ * Serial Configuration
+ *   SoC UART     : enable CONFIG_UNIPHIER_SERIAL
+ *   On-board UART: enable CONFIG_SYS_NS16550_SERIAL
+ */
+#if 1
+#define CONFIG_UNIPHIER_SERIAL
+#else
+#define CONFIG_SYS_NS16550_SERIAL
+#endif
+
+#define CONFIG_SYS_UNIPHIER_UART_CLK    36864000
+
+#define CONFIG_SMC911X
+
+#define CONFIG_DDR_NUM_CH0 1
+#define CONFIG_DDR_NUM_CH1 1
+
+#define CONFIG_DDR_FREQ 1600
+
+/*
+ * Memory Size & Mapping
+ */
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE	0x80000000
+#define CONFIG_SDRAM0_SIZE	0x10000000
+#define CONFIG_SDRAM1_BASE	0x90000000
+#define CONFIG_SDRAM1_SIZE	0x10000000
+
+#define CONFIG_SPL_TEXT_BASE 0x40000
+
+#include "uniphier-common.h"
+
+#endif /* __PH1_XXX_H */
diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h
new file mode 100644
index 00000000000..b79967f7da4
--- /dev/null
+++ b/include/configs/ph1_pro4.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2012-2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PH1_XXX_H
+#define __PH1_XXX_H
+
+/*
+ * Support Card Select
+ *
+ *  CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
+ *  CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
+ *                       CPLD is re-programmed for ARIMA board compatibility.
+ *  No define                     - No support card.
+ */
+
+#if 0
+#define CONFIG_PFC_MICRO_SUPPORT_CARD
+#else
+#define CONFIG_DCC_MICRO_SUPPORT_CARD
+#endif
+
+/*
+ * Serial Configuration
+ *   SoC UART     : enable CONFIG_UNIPHIER_SERIAL
+ *   On-board UART: enable CONFIG_SYS_NS16550_SERIAL
+ */
+#if 1
+#define CONFIG_UNIPHIER_SERIAL
+#else
+#define CONFIG_SYS_NS16550_SERIAL
+#endif
+
+#define CONFIG_SYS_UNIPHIER_UART_CLK    73728000
+
+#define CONFIG_SMC911X
+
+#define CONFIG_DDR_NUM_CH0 2
+#define CONFIG_DDR_NUM_CH1 2
+
+#define CONFIG_DDR_FREQ 1600
+
+#define CONFIG_UNIPHIER_SMP
+
+/*
+ * Memory Size & Mapping
+ */
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE	0x80000000
+#define CONFIG_SDRAM0_SIZE	0x20000000
+#define CONFIG_SDRAM1_BASE	0xa0000000
+#define CONFIG_SDRAM1_SIZE	0x20000000
+
+#define CONFIG_SPL_TEXT_BASE 0x100000
+
+#include "uniphier-common.h"
+
+#endif /* __PH1_XXX_H */
diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h
new file mode 100644
index 00000000000..9d391f1d74a
--- /dev/null
+++ b/include/configs/ph1_sld8.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2012-2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PH1_XXX_H
+#define __PH1_XXX_H
+
+/*
+ * Support Card Select
+ *
+ *  CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
+ *  CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
+ *                       CPLD is re-programmed for ARIMA board compatibility.
+ *  No define                     - No support card.
+ */
+
+#if 0
+#define CONFIG_PFC_MICRO_SUPPORT_CARD
+#else
+#define CONFIG_DCC_MICRO_SUPPORT_CARD
+#endif
+
+/*
+ * Serial Configuration
+ *   SoC UART     : enable CONFIG_UNIPHIER_SERIAL
+ *   On-board UART: enable CONFIG_SYS_NS16550_SERIAL
+ */
+#if 1
+#define CONFIG_UNIPHIER_SERIAL
+#else
+#define CONFIG_SYS_NS16550_SERIAL
+#endif
+
+#define CONFIG_SYS_UNIPHIER_UART_CLK    80000000
+
+#define CONFIG_SMC911X
+
+#define CONFIG_DDR_NUM_CH0 1
+#define CONFIG_DDR_NUM_CH1 1
+
+#define CONFIG_DDR_FREQ 1333
+
+/* #define CONFIG_DDR_STANDARD */
+
+/*
+ * Memory Size & Mapping
+ */
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE	0x80000000
+#define CONFIG_SDRAM0_SIZE	0x10000000
+#define CONFIG_SDRAM1_BASE	0x90000000
+#define CONFIG_SDRAM1_SIZE	0x10000000
+
+#define CONFIG_SPL_TEXT_BASE 0x40000
+
+#include "uniphier-common.h"
+
+#endif /* __PH1_XXX_H */
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index 4747adfeb0d..71be8238998 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -1,5 +1,6 @@
 /*
- * (C) Copyright 2009
+ * (C) Copyright 2009-2014
+ * Gerald Kerma <dreagle@doukki.net>
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  *
@@ -23,12 +24,26 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
 
 /*
+ * Compression configuration
+ */
+#define CONFIG_BZIP2
+#define CONFIG_LZMA
+#define CONFIG_LZO
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+
+/*
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
 #include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
+#define CONFIG_CMD_IDE
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_NAND
@@ -54,8 +69,8 @@
  * it has to be rounded to sector size
  */
 #define CONFIG_ENV_SIZE			0x20000	/* 128k */
-#define CONFIG_ENV_ADDR			0x60000
-#define CONFIG_ENV_OFFSET		0x60000	/* env starts here */
+#define CONFIG_ENV_ADDR			0x80000
+#define CONFIG_ENV_OFFSET		0x80000	/* env starts here */
 
 /*
  * Default environment variables
@@ -64,8 +79,10 @@
 	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
 	"${x_bootcmd_usb}; bootm 0x6400000;"
 
-#define CONFIG_MTDPARTS		"orion_nand:512k(uboot),"	\
-	"3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0"
+#define CONFIG_MTDPARTS		\
+	"mtdparts=orion_nand:512K(uboot),"				\
+	"512K(env),1M(script),6M(kernel),"				\
+	"12M(ramdisk),4M(spare),-(rootfs)"
 
 #define CONFIG_EXTRA_ENV_SETTINGS	"x_bootargs=console"	\
 	"=ttyS0,115200 mtdparts="CONFIG_MTDPARTS	\
@@ -73,6 +90,11 @@
 	"x_bootcmd_usb=usb start\0" \
 	"x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
 
+#define MTDIDS_DEFAULT	"nand0=orion_nand"
+
+#define MTDPARTS_DEFAULT	\
+	"mtdparts="CONFIG_MTDPARTS
+
 /*
  * Ethernet Driver configuration
  */
@@ -92,9 +114,23 @@
 #endif /* CONFIG_CMD_MMC */
 
 /*
+ * SATA driver configuration
+ */
+#ifdef CONFIG_CMD_IDE
+#define __io
+#define CONFIG_IDE_PREINIT
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MVSATA_IDE_USE_PORT0
+#define CONFIG_MVSATA_IDE_USE_PORT1
+#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
+#define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
+#endif /* CONFIG_CMD_IDE */
+
+/*
  * File system
  */
 #define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_UBI
diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h
new file mode 100644
index 00000000000..18fe277cada
--- /dev/null
+++ b/include/configs/uniphier-common.h
@@ -0,0 +1,266 @@
+/*
+ * Copyright (C) 2012-2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/* U-boot - Common settings for UniPhier Family */
+
+#ifndef __CONFIG_UNIPHIER_COMMON_H__
+#define __CONFIG_UNIPHIER_COMMON_H__
+
+#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) &&	\
+				defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
+# error "Both CONFIG_PFC_MICRO_SUPPORT_CARD and CONFIG_DCC_MICRO_SUPPORT_CARD \
+are defined. Select only one of them."
+#endif
+
+/*
+ * Support card address map
+ */
+#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
+# define CONFIG_SUPPORT_CARD_BASE	0x03f00000
+# define CONFIG_SUPPORT_CARD_ETHER_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00000000)
+# define CONFIG_SUPPORT_CARD_LED_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00090000)
+# define CONFIG_SUPPORT_CARD_UART_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x000b0000)
+#endif
+
+#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
+# define CONFIG_SUPPORT_CARD_BASE	0x08000000
+# define CONFIG_SUPPORT_CARD_ETHER_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00000000)
+# define CONFIG_SUPPORT_CARD_LED_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00401630)
+# define CONFIG_SUPPORT_CARD_UART_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00200000)
+#endif
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_COM1		CONFIG_SUPPORT_CARD_UART_BASE
+#define CONFIG_SYS_NS16550_CLK		12288000
+#define CONFIG_SYS_NS16550_REG_SIZE	-2
+
+#define CONFIG_SMC911X_BASE		CONFIG_SUPPORT_CARD_ETHER_BASE
+#define CONFIG_SMC911X_32_BIT
+
+#define CONFIG_SYS_UNIPHIER_SERIAL_BASE0 0x54006800
+#define CONFIG_SYS_UNIPHIER_SERIAL_BASE1 0x54006900
+#define CONFIG_SYS_UNIPHIER_SERIAL_BASE2 0x54006a00
+#define CONFIG_SYS_UNIPHIER_SERIAL_BASE3 0x54006b00
+
+/*-----------------------------------------------------------------------
+ * MMU and Cache Setting
+ *----------------------------------------------------------------------*/
+
+/* Comment out the following to enable L1 cache */
+/* #define CONFIG_SYS_ICACHE_OFF */
+/* #define CONFIG_SYS_DCACHE_OFF */
+
+/* Comment out the following to enable L2 cache */
+#define CONFIG_UNIPHIER_L2CACHE_ON
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_LATE_INIT
+
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+
+#define CONFIG_TIMESTAMP
+
+/* FLASH related */
+#define CONFIG_MTD_DEVICE
+
+/*
+ * uncomment the following to disable FLASH related code.
+ */
+/* #define CONFIG_SYS_NO_FLASH */
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+#define CONFIG_SYS_MONITOR_BASE		0
+#define CONFIG_SYS_FLASH_BASE		0
+
+/*
+ * flash_toggle does not work for out supoort card.
+ * We need to use flash_status_poll.
+ */
+#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
+
+#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
+
+#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
+# define CONFIG_SYS_MAX_FLASH_BANKS	1
+# define CONFIG_SYS_FLASH_BANKS_LIST	{0x00000000}
+# define CONFIG_SYS_FLASH_BANKS_SIZES	{0x02000000}
+#endif
+
+#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
+# define CONFIG_SYS_MAX_FLASH_BANKS	1
+# define CONFIG_SYS_FLASH_BANKS_LIST	{0x04000000}
+# define CONFIG_SYS_FLASH_BANKS_SIZES	{0x04000000}
+#endif
+
+/* serial console configuration */
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+#if !defined(CONFIG_SPL_BUILD)
+#define CONFIG_USE_ARCH_MEMSET
+#define CONFIG_USE_ARCH_MEMCPY
+#endif
+
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+
+#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
+#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+#define CONFIG_CONS_INDEX		1
+
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/canyonlands/u-boot-nand.lds for details.
+ */
+/* #define CONFIG_ENV_IS_IN_NAND */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE				0x2000
+#define CONFIG_ENV_OFFSET			0x0
+/* #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
+
+/* Time clock 1MHz */
+#define CONFIG_SYS_TIMER_RATE			1000000
+
+/*
+ * By default, ARP timeout is 5 sec.
+ * The first ARP request does not seem to work.
+ * So we need to retry ARP request anyway.
+ * We want to shrink the interval until the second ARP request.
+ */
+#define CONFIG_ARP_TIMEOUT	500UL  /* 0.5 msec */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_TIME
+#define CONFIG_CMD_NAND		/* NAND flash suppport */
+
+#define CONFIG_SYS_MAX_NAND_DEVICE			1
+#define CONFIG_SYS_NAND_MAX_CHIPS			2
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+#define CONFIG_NAND_DENALI_ECC_SIZE			1024
+
+#define CONFIG_SYS_NAND_REGS_BASE			0x68100000
+#define CONFIG_SYS_NAND_DATA_BASE			0x68000000
+
+#define CONFIG_SYS_NAND_BASE		(CONFIG_SYS_NAND_DATA_BASE + 0x10)
+
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS			0
+
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x01000000)
+
+#define CONFIG_BOOTDELAY			3
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_AUTOBOOT_KEYED			1
+#define CONFIG_AUTOBOOT_PROMPT	\
+	"Press SPACE to abort autoboot in %d seconds\n", bootdelay
+#define CONFIG_AUTOBOOT_DELAY_STR		"d"
+#define CONFIG_AUTOBOOT_STOP_STR		" "
+
+/*
+ * Network Configuration
+ */
+#define CONFIG_ETHADDR			00:21:83:24:00:00
+#define CONFIG_SERVERIP			192.168.11.1
+#define CONFIG_IPADDR			192.168.11.10
+#define CONFIG_GATEWAYIP		192.168.11.1
+#define CONFIG_NETMASK			255.255.255.0
+
+#define CONFIG_LOADADDR			0x84000000
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_BOOTFILE			"fit.itb"
+
+#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
+
+#define CONFIG_BOOTCOMMAND		"run $bootmode"
+
+#define CONFIG_ROOTPATH			"/nfs/root/path"
+#define CONFIG_NFSBOOTCOMMAND						\
+	"setenv bootargs $bootargs root=/dev/nfs rw "			\
+	"nfsroot=$serverip:$rootpath "					\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
+	"tftpboot; bootm;"
+
+#define CONFIG_BOOTARGS		" user_debug=0x1f init=/sbin/init"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"image_offset=0x00080000\0"		\
+	"image_size=0x00f00000\0"		\
+	"verify=n\0"				\
+	"autostart=yes\0"			\
+	"norboot=run add_default_bootargs;"				\
+		"bootm $image_offset\0"					\
+	"nandboot=run add_default_bootargs;"				\
+		"nand read $loadaddr $image_offset $image_size;"	\
+		"bootm\0"						\
+	"add_default_bootargs=setenv bootargs $bootargs"		\
+		" console=ttyS0,$baudrate\0"				\
+
+/* FIT support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
+
+/* Open Firmware flat tree */
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_HAVE_ARM_SECURE
+
+/* Memory Size & Mapping */
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SDRAM0_BASE
+
+#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE >= CONFIG_SDRAM1_BASE
+/* Thre is no memory hole */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_SIZE	(CONFIG_SDRAM0_SIZE + CONFIG_SDRAM1_SIZE)
+#else
+#define CONFIG_NR_DRAM_BANKS		2
+#define CONFIG_SYS_SDRAM_SIZE	(CONFIG_SDRAM0_SIZE)
+#endif
+
+#define CONFIG_SYS_TEXT_BASE		0x84000000
+
+#if defined(CONFIG_SPL_BUILD)
+#define CONFIG_BOARD_POSTCLK_INIT
+#else
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#endif
+
+#define CONFIG_SYS_SPL_MALLOC_START	(0x0ff00000)
+#define CONFIG_SYS_SPL_MALLOC_SIZE	(0x00004000)
+
+#define CONFIG_SYS_INIT_SP_ADDR		(0x0ff08000)
+
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_NAND_SUPPORT
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT	/* for mem_malloc_init */
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+
+#define CONFIG_SPL_BOARD_INIT
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS		0x10000
+
+#endif /* __CONFIG_UNIPHIER_COMMON_H__ */