* Patch by Marc Singer, 29 May 2003:LABEL_2003_05_31_2115

  Fixed rarp boot method for IA32 and other little-endian CPUs.

* Patch by Marc Singer, 28 May 2003:
  Added port I/O commands.

* Patch by Matthew McClintock, 28 May 2003
  - cpu/mpc824x/start.S: fix relocation code when booting from RAM
  - minor patches for utx8245

* Patch by Daniel Engström, 28 May 2003:
  x86 update

* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
  add nand flash support to SXNI855T configuration
  fix/extend nand flash support:
  - fix 'nand erase' command so does not erase bad blocks
  - fix 'nand write' command so does not write to bad blocks
  - fix nand_probe() so handles no flash detected properly
  - add doc/README.nand
  - add .jffs2 and .oob options to nand read/write
  - add 'nand bad' command to list bad blocks
  - add 'clean' option to 'nand erase' to write JFFS2 clean markers
  - make NAND read/write faster

* Patch by Rune Torgersen, 23 May 2003:
  Update for MPC8266ADS board

24 files changed, 668 insertions, 136 deletions

diff --git a/include/asm-i386/bitops.h b/include/asm-i386/bitops.h
index a3063cacc91..7d29335fdee 100644
--- a/include/asm-i386/bitops.h
+++ b/include/asm-i386/bitops.h
@@ -5,7 +5,6 @@
  * Copyright 1992, Linus Torvalds.
  */
 
-#include <linux/config.h>
 
 /*
  * These have to be done with inline assembly: that way the bit-setting
diff --git a/include/asm-i386/byteorder.h b/include/asm-i386/byteorder.h
index bbfb629fae2..a9c69d5b1f2 100644
--- a/include/asm-i386/byteorder.h
+++ b/include/asm-i386/byteorder.h
@@ -5,10 +5,6 @@
 
 #ifdef __GNUC__
 
-/* For avoiding bswap on i386 */
-#ifdef __KERNEL__
-#include <linux/config.h>
-#endif
 
 static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
 {
diff --git a/include/asm-i386/ic/sc520.h b/include/asm-i386/ic/sc520.h
index 9708504e317..1836f99a6de 100644
--- a/include/asm-i386/ic/sc520.h
+++ b/include/asm-i386/ic/sc520.h
@@ -116,6 +116,11 @@
 #define SC520_UART2CTL		0x0cc4	        /* UART 2 General Control Register */
 #define SC520_UART2STA		0x0cc5	        /* UART 2 General Status Register */
 #define SC520_UART2FCRSHAD	0x0cc6	        /* UART 2 FIFO Control Shadow Register */
+#define SC520_SSICTL            0x0cd0          /* SSI Control */
+#define SC520_SSIXMIT           0x0cd1          /* SSI Transmit */
+#define SC520_SSICMD            0x0cd2          /* SSI Command */
+#define SC520_SSISTA            0x0cd3          /* SSI Status */
+#define SC520_SSIRCV            0x0cd4          /* SSI Receive */
 #define SC520_PICICR		0x0d00		/* Interrupt Control Register */
 #define SC520_MPICMODE		0x0d02		/* Master PIC Interrupt Mode Register */
 #define SC520_SL1PICMODE	0x0d03		/* Slave 1 PIC Interrupt Mode Register */
@@ -195,9 +200,31 @@
 
 /* MMCR Register bits (not all of them :) ) */
 
+/* SSI Stuff */
+#define CTL_CLK_SEL_4           0x00           /* Nominal Bit Rate = 8 MHz    */
+#define CTL_CLK_SEL_8           0x10           /* Nominal Bit Rate = 4 MHz    */
+#define CTL_CLK_SEL_16          0x20           /* Nominal Bit Rate = 2 MHz    */
+#define CTL_CLK_SEL_32          0x30           /* Nominal Bit Rate = 1 MHz    */
+#define CTL_CLK_SEL_64          0x40           /* Nominal Bit Rate = 512 KHz  */
+#define CTL_CLK_SEL_128         0x50           /* Nominal Bit Rate = 256 KHz  */
+#define CTL_CLK_SEL_256         0x60           /* Nominal Bit Rate = 128 KHz  */
+#define CTL_CLK_SEL_512         0x70           /* Nominal Bit Rate = 64 KHz   */
+
+#define TC_INT_ENB              0x08           /* Transaction Complete Interrupt Enable */
+#define PHS_INV_ENB             0x04           /* SSI Inverted Phase Mode Enable */
+#define CLK_INV_ENB    	        0x02           /* SSI Inverted Clock Mode Enable */
+#define MSBF_ENB      	        0x01           /* SSI Most Significant Bit First Mode Enable */
+
+#define SSICMD_CMD_SEL_XMITRCV  0x03           /* Simultaneous Transmit / Receive Transaction */
+#define SSICMD_CMD_SEL_RCV      0x02           /* Receive Transaction */
+#define SSICMD_CMD_SEL_XMIT     0x01           /* Transmit Transaction */
+#define SSISTA_BSY              0x02           /* SSI Busy */
+#define SSISTA_TC_INT           0x01           /* SSI Transaction Complete Interrupt */
+
+
 /* BITS for SC520_ADDDECCTL: */
 #define WPV_INT_ENB		0x80		/* Write-Protect Violation Interrupt Enable */
-#define IO_HOLE_DEST		0x10		/* I/O Hole Access Destination */
+#define IO_HOLE_DEST_PCI	0x10		/* I/O Hole Access Destination */
 #define RTC_DIS			0x04		/* RTC Disable */
 #define UART2_DIS		0x02		/* UART2 Disable */
 #define UART1_DIS		0x01		/* UART1 Disable */
@@ -215,25 +242,64 @@
 #define SC520_ISA_IO_BUS	0x00000000
 #define SC520_ISA_IO_SIZE	0x00001000
 
-/* PCI I/O space from 0x1000 to 0xfdff */
+/* PCI I/O space from 0x1000 to 0xdfff 
+ * (make 0xe000-0xfdff available for stuff like PCCard boot) */
 #define SC520_PCI_IO_PHYS	0x00001000
 #define SC520_PCI_IO_BUS	0x00001000
-#define SC520_PCI_IO_SIZE	0x0000ee00
+#define SC520_PCI_IO_SIZE	0x0000d000
 
 /* system memory from 0x00000000 to 0x0fffffff */
 #define	SC520_PCI_MEMORY_PHYS	0x00000000
 #define	SC520_PCI_MEMORY_BUS	0x00000000
 #define SC520_PCI_MEMORY_SIZE	0x10000000
 
-/* PCI bus memory from 0x10000000 to 0x27ffffff */
+/* PCI bus memory from 0x10000000 to 0x26ffffff 
+ * (make 0x27000000 - 0x27ffffff available for stuff like PCCard boot) */
 #define SC520_PCI_MEM_PHYS	0x10000000
 #define SC520_PCI_MEM_BUS       0x10000000
-#define SC520_PCI_MEM_SIZE	0x18000000
+#define SC520_PCI_MEM_SIZE	0x17000000
 
 /* 0x28000000 - 0x3fffffff is used by the flash banks */
 
 /* 0x40000000 - 0xffffffff is not adressable by the SC520 */
 
+/* priority numbers used for interrupt channel mappings */
+#define SC520_IRQ_DISABLED 0
+#define SC520_IRQ0  1
+#define SC520_IRQ1  2
+#define SC520_IRQ2  4  /* same as IRQ9 */
+#define SC520_IRQ3  11
+#define SC520_IRQ4  12
+#define SC520_IRQ5  13
+#define SC520_IRQ6  21
+#define SC520_IRQ7  22
+#define SC520_IRQ8  3
+#define SC520_IRQ9  4
+#define SC520_IRQ10 5 
+#define SC520_IRQ11 6
+#define SC520_IRQ12 7
+#define SC520_IRQ13 8
+#define SC520_IRQ14 9
+#define SC520_IRQ15 10
+
+
+/* pin number used for PCI interrupt mappings */
+#define SC520_PCI_INTA 0
+#define SC520_PCI_INTB 1
+#define SC520_PCI_INTC 2
+#define SC520_PCI_INTD 3
+#define SC520_PCI_GPIRQ0 4
+#define SC520_PCI_GPIRQ1 5
+#define SC520_PCI_GPIRQ2 6
+#define SC520_PCI_GPIRQ3 7
+#define SC520_PCI_GPIRQ4 8
+#define SC520_PCI_GPIRQ5 9
+#define SC520_PCI_GPIRQ6 10
+#define SC520_PCI_GPIRQ7 11
+#define SC520_PCI_GPIRQ8 12
+#define SC520_PCI_GPIRQ9 13
+#define SC520_PCI_GPIRQ10 14
+
 /* utility functions */
 void write_mmcr_byte(u16 mmcr, u8 data);
 void write_mmcr_word(u16 mmcr, u16 data);
@@ -242,8 +308,11 @@ u8 read_mmcr_byte(u16 mmcr);
 u16 read_mmcr_word(u16 mmcr);
 u32 read_mmcr_long(u16 mmcr);
 
+extern int sc520_pci_ints[];
+
 void init_sc520(void);
 unsigned long init_sc520_dram(void);
 void pci_sc520_init(struct pci_controller *hose);
+int pci_sc520_set_irq(int pci_pin, int irq);
 
 #endif
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h
index d8c503ccb32..d17d45e9188 100644
--- a/include/asm-i386/io.h
+++ b/include/asm-i386/io.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_IO_H
 #define _ASM_IO_H
 
-#include <linux/config.h>
-
 /*
  * This file contains the definitions for the x86 IO instructions
  * inb/inw/inl/outb/outw/outl and the "string versions" of the same
diff --git a/include/asm-i386/pci.h b/include/asm-i386/pci.h
index 15c165b720f..3a91f57cf4b 100644
--- a/include/asm-i386/pci.h
+++ b/include/asm-i386/pci.h
@@ -27,5 +27,11 @@
 #define _PCI_I386_H_	1
 
 void pci_setup_type1(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
+int pci_enable_legacy_video_ports(struct pci_controller* hose);
+int pci_shadow_rom(pci_dev_t dev, unsigned char *dest);
+void pci_remove_rom_window(struct pci_controller* hose, u32 addr);
+u32 pci_get_rom_window(struct pci_controller* hose, int size);
+
+
 
 #endif
diff --git a/include/asm-i386/realmode.h b/include/asm-i386/realmode.h
index fcb76c336a6..a84f1281733 100644
--- a/include/asm-i386/realmode.h
+++ b/include/asm-i386/realmode.h
@@ -27,5 +27,6 @@
 
 int bios_setup(void);
 int enter_realmode(u16 seg, u16 off, struct pt_regs *in, struct pt_regs *out);
+int enter_realmode_int(u8 lvl, struct pt_regs *in, struct pt_regs *out);
 
 #endif
diff --git a/include/asm-i386/u-boot-i386.h b/include/asm-i386/u-boot-i386.h
index 6e5e0595925..12d10a78a05 100644
--- a/include/asm-i386/u-boot-i386.h
+++ b/include/asm-i386/u-boot-i386.h
@@ -46,8 +46,15 @@ int cpu_init(void);
 int timer_init(void);
 
 /* board/.../... */
-int	board_init(void);
-int	dram_init (void);
+int board_init(void);
+int dram_init(void);
+
+void isa_unmap_rom(u32 addr);
+u32 isa_map_rom(u32 bus_addr, int size);
+
+/* lib_i386/... */
+int video_bios_init(void);
+int video_init(void);
 
 
 #endif	/* _U_BOOT_I386_H_ */
diff --git a/include/asm-i386/u-boot.h b/include/asm-i386/u-boot.h
index 554bc85ea94..dc5dd727c9c 100644
--- a/include/asm-i386/u-boot.h
+++ b/include/asm-i386/u-boot.h
@@ -43,7 +43,8 @@ typedef struct bd_info {
 	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
 	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
 	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned long	bi_baudrate;	/* Console Baudrate */
+	unsigned int	bi_baudrate;	/* Console Baudrate */
+	unsigned long   bi_boot_params;	/* where this board expects params */
 	struct environment_s	       *bi_env;
 	struct				/* RAM configuration */
 	{ 
diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h
index 170c38f5d76..18ce6d8eef2 100644
--- a/include/cmd_confdefs.h
+++ b/include/cmd_confdefs.h
@@ -80,6 +80,7 @@
 #define CFG_CMD_VFD	0x0000400000000000	/* VFD support (TRAB)		*/
 #define CFG_CMD_NAND	0x0000800000000000	/* NAND support        		*/
 #define CFG_CMD_BMP	0x0001000000000000	/* BMP support			*/
+#define CFG_CMD_PORTIO	0x0002000000000000	/* Port I/O		        */
 
 #define CFG_CMD_ALL	0xFFFFFFFFFFFFFFFF	/* ALL commands			*/
 
diff --git a/include/cmd_nand.h b/include/cmd_nand.h
index febb27dd7ba..ce7ee84c593 100644
--- a/include/cmd_nand.h
+++ b/include/cmd_nand.h
@@ -27,18 +27,21 @@
 
 #if (CONFIG_COMMANDS & CFG_CMD_NAND)
 #define	CMD_TBL_NAND	MK_CMD_TBL_ENTRY(					\
-	"nand",	3,	5,	1,	do_nand,					\
-	"nand    - NAND sub-system\n",					\
+	"nand",	3,	5,	1,	do_nand,				\
+	"nand    - NAND sub-system\n",						\
 	"info  - show available NAND devices\n"					\
 	"nand device [dev] - show or set current device\n"			\
-	"nand read  addr off size\n"						\
-	"nand write addr off size - read/write `size'"				\
-	" bytes starting at offset `off'\n"					\
-	"    to/from memory address `addr'\n"					\
-	"nand erase off size - erase `size' bytes of NAND from offset `off'\n"	\
+	"nand read[.jffs2]  addr off size\n"					\
+	"nand write[.jffs2] addr off size - read/write `size' bytes starting\n"	\
+	"    at offset `off' to/from memory address `addr'\n"			\
+	"nand erase [clean] [off size] - erase `size' bytes from\n"		\
+	"    offset `off' (entire device if not specified)\n"			\
+	"nand bad - show bad blocks\n"						\
+	"nand read.oob addr off size - read out-of-band data\n"			\
+	"nand write.oob addr off size - read out-of-band data\n"		\
 ),
 
-#define CMD_TBL_NANDBOOT	MK_CMD_TBL_ENTRY(					\
+#define CMD_TBL_NANDBOOT	MK_CMD_TBL_ENTRY(				\
 	"nboot", 4,	4,	1,	do_nandboot,				\
 	"nboot   - boot from NAND device\n",					\
 	"loadAddr dev\n"							\
diff --git a/include/cmd_portio.h b/include/cmd_portio.h
new file mode 100644
index 00000000000..6897ab6d578
--- /dev/null
+++ b/include/cmd_portio.h
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2003
+ * Marc Singer, elf@buici.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Memory Functions
+ */
+#ifndef	_CMD_PORTIO_H
+#define _CMD_PORTIO_H
+
+#if (CONFIG_COMMANDS & CFG_CMD_PORTIO)
+
+#define CMD_TBL_PORTIO_OUT	MK_CMD_TBL_ENTRY(		      \
+	"out",		3,	3,	1,	do_portio_out,	      \
+	"out     - write datum to IO port\n",			      \
+	"[.b, .w, .l] port value\n    - output to IO port\n"   	      \
+),
+#define CMD_TBL_PORTIO_IN	MK_CMD_TBL_ENTRY(		      \
+ 	"in",		2,	2,	1,	do_portio_in,	      \
+	"in      - read data from an IO port\n",		      \
+	"[.b, .w, .l] port\n"					      \
+	"    - read datum from IO port\n"			      \
+),
+
+int do_portio_out (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_portio_in  (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+
+#else
+#define CMD_TBL_PORTIO_OUT
+#define CMD_TBL_PORTIO_IN
+#endif	/* CFG_CMD_PORTIO */
+
+#endif	/* _CMD_PORTIO_H */
diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 398bf76ede4..5468fe2bd34 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -279,7 +279,7 @@
 
 /* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization                       */
 #define CFG_EBC_PB0AP           0x92015480
-//#define CFG_EBC_PB0AP           0x08055880  /* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
+/*#define CFG_EBC_PB0AP           0x08055880  /XXX* TWT=16,CSN=1,OEN=1,WBN=1,WBF=1,TH=4,SOR=1 */
 #define CFG_EBC_PB0CR           0xFFC5A000  /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
 
 /* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization                      */
diff --git a/include/configs/BUBINGA405EP.h b/include/configs/BUBINGA405EP.h
index 176a84ac32e..f776a322918 100644
--- a/include/configs/BUBINGA405EP.h
+++ b/include/configs/BUBINGA405EP.h
@@ -29,7 +29,7 @@
 #define __CONFIG_H
 
 /* Debug options */
-//#define __DEBUG_START_FROM_SRAM__
+/*#define __DEBUG_START_FROM_SRAM__ */
 
 
 
@@ -259,7 +259,7 @@
 #endif
 
 
-//#define CFG_MONITOR_LEN		(200 * 1024)	/* Reserve 200 kB for Monitor	*/
+/*#define CFG_MONITOR_LEN		(200 * 1024)	/XXX* Reserve 200 kB for Monitor	*/
 #define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 200 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
 
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index e0159a2b69b..414d515b7a1 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -27,7 +27,18 @@
  */
 
 /*
- * Config header file for a MPC8260ADS Pilot 16M Ram Simm, 8Mbytes Flash Simm
+ * Config header file for a MPC8266ADS Pilot 16M Ram Simm, 8Mbytes Flash Simm
+ */
+
+/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+   !!                                                                 !!
+   !!  This configuration requires JP3 to be in position 1-2 to work  !!
+   !!  To make it work for the default, the TEXT_BASE define in       !!
+   !!  board/mpc8266ads/config.mk must be changed from 0xfe000000 to  !!
+   !!  0xfff00000						      !!
+   !!  The CFG_HRCW_MASTER define below must also be changed to match !!
+   !!                                                                 !!
+   !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 
  */
 
 #ifndef __CONFIG_H
@@ -375,6 +386,7 @@
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 
+/* Use this HRCW for booting from address 0xfe00000 (JP3 in setting 1-2)  */
 /* 0x0EB2B645 */
 #define CFG_HRCW_MASTER (( HRCW_BPS11 | HRCW_CIP )				|\
 			 ( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB010 )		|\
@@ -382,8 +394,10 @@
 			 ( HRCW_CS10PC01 | HRCW_MODCK_H0101 )			\
 			)
 
+/* Use this HRCW for booting from address 0xfff0000 (JP3 in setting 2-3)  */
+/* #define CFG_HRCW_MASTER 0x0cb23645 */
 
-/* This value should actually be situated in the first 256 bytes of the FLASH
+/* This value should actually be situated in the first 256 bytes of the FLASH  
 	which on the standard MPC8266ADS board is at address 0xFF800000
 	The linker script places it at 0xFFF00000 instead.
 
@@ -395,8 +409,7 @@
 
 	- Rune
 
-	*/
-/* #define CFG_HRCW_MASTER 0x0cb23645 */
+*/
 
 /* no slaves */
 #define CFG_HRCW_SLAVE1 0
@@ -436,7 +449,24 @@
 #endif
 
 
-#define CFG_HID0_INIT		0
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers                    2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+/*#define CFG_HID0_INIT		0 */
+#define CFG_HID0_INIT	(HID0_ICE  |\
+			 HID0_DCE  |\
+			 HID0_ICFI |\
+			 HID0_DCI  |\
+			 HID0_IFEM |\
+			 HID0_ABE)
+
 #define CFG_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )
 
 #define CFG_HID2		0
@@ -519,7 +549,7 @@
 
 #define CFG_PCI_MSTR_MEMIO_LOCAL    0xA0000000          /* Local base */
 #define CFG_PCI_MSTR_MEMIO_BUS      0xA0000000          /* PCI base   */
-#define CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL
+#define CFG_CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL
 #define CFG_PCI_MSTR_MEMIO_SIZE     0x20000000          /* 512MB */
 #define CFG_POCMR1_MASK_ATTRIB      (POCMR_MASK_512MB | POCMR_ENABLE)
 
@@ -530,7 +560,7 @@
  */
 
 #define CFG_PCI_MSTR_IO_LOCAL       0xF4000000          /* Local base */
-#define CFG_PCI_MSTR_IO_BUS         0x00000000          /* PCI base   */
+#define CFG_PCI_MSTR_IO_BUS         0xF4000000          /* PCI base   */
 #define CFG_CPU_PCI_IO_START        PCI_MSTR_IO_LOCAL
 #define CFG_PCI_MSTR_IO_SIZE        0x04000000          /* 64MB */
 #define CFG_POCMR2_MASK_ATTRIB      (POCMR_MASK_64MB | POCMR_ENABLE | POCMR_PCI_IO)
diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index a7f0c219670..bdaf683c362 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -143,11 +143,52 @@
 
 #define CFG_DISCOVER_PHY
 
-#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | CFG_CMD_EEPROM | CFG_CMD_DATE)
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL		| \
+				 CFG_CMD_EEPROM		| \
+				 CFG_CMD_NAND		| \
+				 CFG_CMD_DATE)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
+/* NAND flash support */
+#define CONFIG_MTD_NAND_ECC_JFFS2
+#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices	*/
+#define SECTORSIZE 512
+
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+
+#define NAND_ChipID_UNKNOWN 	0x00
+#define NAND_MAX_FLOORS 1
+#define NAND_MAX_CHIPS 1
+
+/* DFBUSY is available on Port C, bit 12; 0 if busy */
+#define NAND_WAIT_READY(nand)	\
+	while (!(((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pcdat & 0x0008));
+#define WRITE_NAND_COMMAND(d, adr) WRITE_NAND((d), (adr))
+#define WRITE_NAND_ADDRESS(d, adr) WRITE_NAND((d), (adr))
+#define WRITE_NAND(d, adr)	\
+	 do { (*(volatile uint8_t *)(adr) = (uint8_t)(d)); } while (0)
+#define READ_NAND(adr) (*(volatile uint8_t *)(adr))
+#define	CLE_LO	0x01	/* 0 selects CLE mode (CLE high) */
+#define	ALE_LO	0x02	/* 0 selects ALE mode (ALE high) */
+#define	CE_LO	0x04	/* 1 selects chip (CE low) */
+#define	nand_setcr(cr, val) do {*(volatile uint8_t*)(cr) = (val);} while (0)
+#define NAND_DISABLE_CE(nand) \
+	nand_setcr((nand)->IO_ADDR + 1, ALE_LO | CLE_LO)
+#define NAND_ENABLE_CE(nand) \
+	nand_setcr((nand)->IO_ADDR + 1, CE_LO | ALE_LO | CLE_LO)
+#define NAND_CTL_CLRALE(nandptr) \
+	nand_setcr((nandptr) + 1, CE_LO | ALE_LO | CLE_LO)
+#define NAND_CTL_SETALE(nandptr) \
+	nand_setcr((nandptr) + 1, CE_LO | CLE_LO)
+#define NAND_CTL_CLRCLE(nandptr) \
+	nand_setcr((nandptr) + 1, CE_LO | ALE_LO | CLE_LO)
+#define NAND_CTL_SETCLE(nandptr) \
+	nand_setcr((nandptr) + 1, CE_LO | ALE_LO)
+
 /*
  * Miscellaneous configurable options
  */
@@ -329,7 +370,7 @@
  * These preliminary values are also the final values.
  */
 #define CFG_OR_TIMING_FPGA \
-	(OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_5_CLK | OR_EHTR)
+	(OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | OR_SCY_4_CLK | OR_EHTR | OR_TRLX)
 #define CFG_BR1_PRELIM	((CFG_FPGA_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
 #define CFG_OR1_PRELIM	(((-CFG_FPGA_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_FPGA)
 
@@ -338,7 +379,7 @@
  * These preliminary values are also the final values.
  */
 #define CFG_OR_TIMING_DFLASH \
-	(OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_EHTR)
+	(OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_2_CLK | OR_EHTR | OR_TRLX)
 #define CFG_BR4_PRELIM	((CFG_DFLASH_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
 #define CFG_OR4_PRELIM	(((-CFG_DFLASH_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_DFLASH)
 
diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h
index e7d6c7942ba..292b4bf3f12 100644
--- a/include/configs/sc520_cdp.h
+++ b/include/configs/sc520_cdp.h
@@ -34,6 +34,8 @@
  */
 
 #define CONFIG_X86		1	/* This is a X86 CPU		*/
+#define CONFIG_SC520		1	/* Include support for AMD SC520 */
+#define CONFIG_ALI152X		1	/* Include support for Ali 152x SIO */
 
 #define CFG_SDRAM_PRECHARGE_DELAY 6     /* 6T */	
 #define CFG_SDRAM_REFRESH_RATE    78    /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
@@ -63,16 +65,9 @@
 #define CONFIG_MALLOC_SIZE	(CFG_ENV_SIZE + 128*1024)
 
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CFG_ENV_IS_NOWHERE 1
-#undef CFG_ENV_IS_IN_FLASH 
-#undef CFG_ENV_IS_IN_NVRAM 
-#undef CFG_ENV_IS_INEEPROM
-
 #define CONFIG_BAUDRATE		9600
 
-#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET)
+#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_EEPROM)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -86,8 +81,6 @@
 #define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
 #endif
 
-#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
-#define CFG_JFFS2_NUM_BANKS     1           /*  */
 
 /*
  * Miscellaneous configurable options
@@ -104,7 +97,7 @@
 
 #undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
-#define	CFG_LOAD_ADDR		0x38000000	/* default load address	*/
+#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
 
 #define	CFG_HZ			1024		/* incrementer freq: 1kHz */
 
@@ -117,26 +110,36 @@
  */
 #define CONFIG_NR_DRAM_BANKS	4	   /* we have 4 banks of DRAM */
 
-
-#define PHYS_FLASH_1		0x38000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE		0x00800000 /* 8 MB */
-
-#define CFG_FLASH_BASE		PHYS_FLASH_1
-
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+
+
+#define CFG_MAX_FLASH_BANKS	3	/* max number of memory banks		*/
 #define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
 
 /* timeout values are in ticks */
 #define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
 
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_ADDR		(PHYS_FLASH_1 + 0x7a0000)	/* Addr of Environment Sector	*/
-#define CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+#define CONFIG_SPI_EEPROM      /* Support for SPI EEPROMs (AT25128) */
+#define CONFIG_MW_EEPROM       /* Support for MicroWire EEPROMs (AT93LC46) */ 
+
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
 
+/* Environment in EEPROM */
+#define CFG_ENV_IS_IN_EEPROM   1
+#define CONFIG_SPI
+#define CFG_ENV_SIZE	       0x4000	/* Total Size of Environment EEPROM 16k is SPI is used or 128 bytes if MW is used*/
+#define CFG_ENV_OFFSET         0      
+#define CONFIG_SC520_CDP_USE_SPI  /* Store configuration in the SPI part */
+#undef CONFIG_SC520_CDP_USE_MW    /* Store configuration in the MicroWire part */
+#define CONFIG_SPI_X 1
+#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS     1           /*  */
 
 /*-----------------------------------------------------------------------
  * Device drivers
@@ -146,19 +149,20 @@
 #define CONFIG_PCNET_79C973
 #define CONFIG_PCNET_79C975
 #define PCNET_HAS_PROM         1
+
 /************************************************************
  * IDE/ATA stuff
  ************************************************************/
-#define CFG_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
+#define CFG_IDE_MAXBUS		1   /* max. 2 IDE busses	*/
 #define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
 #define CFG_ATA_IDE0_OFFSET	0x01F0	/* ide0 offste */
-#define CFG_ATA_IDE1_OFFSET	0x0170	/* ide1 offset */
+//#define CFG_ATA_IDE1_OFFSET	0x0170	/* ide1 offset */
 #define CFG_ATA_DATA_OFFSET	0	/* data reg offset	*/
 #define CFG_ATA_REG_OFFSET	0	/* reg offset */
 #define CFG_ATA_ALT_OFFSET	0x200	/* alternate register offset */
+#define CFG_ATA_BASE_ADDR       0
 
-#undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 #undef  CONFIG_IDE_RESET		/* reset for ide unsupported...	*/
 #undef  CONFIG_IDE_RESET_ROUTINE	/* no special reset function */
@@ -176,23 +180,13 @@
 #define CONFIG_ISO_PARTITION /* Experimental */
 
 /************************************************************
- * Keyboard support
+ * Video/Keyboard support
  ************************************************************/
-#define CONFIG_ISA_KEYBOARD
+#define CONFIG_VIDEO			/* To enable video controller support */
+#define CONFIG_I8042_KBD
+#define CFG_ISA_IO 0
+
 
-#if 0
-/************************************************************
- * Video support
- ************************************************************/
-#define CONFIG_VIDEO			/*To enable video controller support */
-#define CONFIG_VIDEO_CT69000
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VIDEO_ONBOARD		/* Video controller is on-board */
-#endif
 
 /************************************************************
  * RTC
@@ -207,4 +201,10 @@
 #define CONFIG_PCI_PNP                            /* pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW
 
+#define	CFG_FIRST_PCI_IRQ   10
+#define	CFG_SECOND_PCI_IRQ  9 
+#define CFG_THIRD_PCI_IRQ   11 
+#define	CFG_FORTH_PCI_IRQ   15
+
+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h
new file mode 100644
index 00000000000..4d5a5688f70
--- /dev/null
+++ b/include/configs/sc520_spunk.h
@@ -0,0 +1,212 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_X86		1	/* This is a X86 CPU		*/
+#define CONFIG_SC520		1	/* Include support for AMD SC520 */
+
+#define CFG_SDRAM_PRECHARGE_DELAY 6     /* 6T */	
+#define CFG_SDRAM_REFRESH_RATE    78    /* 7.8uS (choices are 7.8, 15.6, 31.2 or 62.5uS) */
+#define CFG_SDRAM_RAS_CAS_DELAY   3     /* 3T */
+
+/* define at most one of these */
+#undef CFG_SDRAM_CAS_LATENCY_2T
+#define CFG_SDRAM_CAS_LATENCY_3T
+
+#define CFG_SC520_HIGH_SPEED    0       /* 100 or 133MHz */
+#define CFG_RESET_GENERIC       1       /* use tripple-fault to reset cpu */
+#undef  CFG_RESET_SC520                 /* use SC520 MMCR's to reset cpu */
+#undef  CFG_TIMER_SC520                 /* use SC520 swtimers */
+#define CFG_TIMER_GENERIC       1       /* use the i8254 PIT timers */
+#undef  CFG_TIMER_TSC                   /* use the Pentium TSC timers */
+
+#define CFG_STACK_SIZE          0x8000  /* Size of bootloader stack */
+
+#define CONFIG_SHOW_BOOT_PROGRESS 1
+#define CONFIG_LAST_STAGE_INIT    1
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_MALLOC_SIZE	(CFG_ENV_SIZE + 128*1024)
+
+
+#define CONFIG_BAUDRATE		9600
+
+#define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_PCI | CFG_CMD_JFFS2 | CFG_CMD_IDE | CFG_CMD_NET | CFG_CMD_PCMCIA | CFG_CMD_EEPROM)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	15
+#define CONFIG_BOOTARGS    	"root=/dev/mtdblock1 console=ttyS0,9600 mtdparts=phys:7936k(root),256k(uboot) "
+#define CONFIG_BOOTCOMMAND	"setenv bootargs root=/dev/nfs ip=autoconf console=ttyS0,9600 mtdparts=phys:7808k(root),128k(env),256k(uboot); bootp; bootm" 
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define	CFG_PROMPT		"boot > "	/* Monitor Command Prompt	*/
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x01000000	/* 1 ... 16 MB in DRAM	*/
+
+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR		0x100000	/* default load address	*/
+
+#define	CFG_HZ			1024		/* incrementer freq: 1kHz */
+
+						/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	4	   /* we have 4 banks of DRAM */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
+
+
+#define CONFIG_SPI_EEPROM       /* SPI EEPROMs such as AT25010 or AT25640 */
+#define CONFIG_MW_EEPROM        /* MicroWire EEPROMS such as AT93LC46 */
+#define CONFIG_DS1722           /* Dallas DS1722 SPI Temperature probe */
+				 
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+
+#if 0
+/* Environment in flash */
+#define CFG_ENV_IS_IN_FLASH     1 
+# define CFG_ENV_ADDR		(0x387a0000)	/* Addr of Environment Sector	*/
+# define CFG_ENV_SIZE		0x20000	/* Total Size of Environment Sector (or 0x10000) */
+# define CFG_ENV_OFFSET         0
+
+#else
+/* Environment in EEPROM */
+
+# define CFG_ENV_IS_IN_EEPROM   1
+# define CONFIG_SPI
+# define CONFIG_SPI_X 1
+# define CFG_ENV_SIZE		0x2000	/* Total Size of Environment EEPROM	*/
+# define CFG_ENV_OFFSET         0x1c00      
+
+#endif
+
+#define CFG_JFFS2_FIRST_BANK    0           /* use for JFFS2 */
+#define CFG_JFFS2_NUM_BANKS     1           /*  */
+
+/*-----------------------------------------------------------------------
+ * Device drivers
+ */
+#define CONFIG_NET_MULTI        /* Multi ethernet cards support */
+#define CONFIG_EEPRO100
+
+/************************************************************
+ * IDE/ATA stuff
+ ************************************************************/
+#define CFG_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
+#define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
+#define CFG_ATA_BASE_ADDR       0
+#define CFG_ATA_IDE0_OFFSET	0x01f0	/* ide0 offset */
+#define CFG_ATA_IDE1_OFFSET	0xe000	/* ide1 offset */
+#define CFG_ATA_DATA_OFFSET	0	/* data reg offset	*/
+#define CFG_ATA_REG_OFFSET	0	/* reg offset */
+#define CFG_ATA_ALT_OFFSET	0x200	/* alternate register offset */
+
+#define CFG_FISRT_PCMCIA_BUS    1
+
+#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
+#undef  CONFIG_IDE_RESET		/* reset for ide unsupported...	*/
+#undef  CONFIG_IDE_RESET_ROUTINE	/* no special reset function */
+
+#define CONFIG_IDE_TI_CARDBUS
+#define CFG_PCMCIA_CIS_WIN          0x27f00000
+#define CFG_PCMCIA_CIS_WIN_SIZE     0x00100000
+#define CFG_PCMCIA_IO_WIN           0xe000
+#define CFG_PCMCIA_IO_WIN_SIZE      16
+
+/************************************************************
+ * DISK Partition support
+ ************************************************************/
+#define CONFIG_DOS_PARTITION
+#define CONFIG_MAC_PARTITION
+#define CONFIG_ISO_PARTITION /* Experimental */
+
+
+
+
+/************************************************************
+ * RTC
+ ***********************************************************/
+#define CONFIG_RTC_MC146818
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * PCI stuff
+ */
+#define CONFIG_PCI                                /* include pci support */
+#define CONFIG_PCI_PNP                            /* pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW
+
+#define	CFG_FIRST_PCI_IRQ   9
+#define	CFG_SECOND_PCI_IRQ  10 
+#define CFG_THIRD_PCI_IRQ   11 
+#define	CFG_FORTH_PCI_IRQ   12
+
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/sc520_spunk_rel.h b/include/configs/sc520_spunk_rel.h
new file mode 100644
index 00000000000..2d53530f3fd
--- /dev/null
+++ b/include/configs/sc520_spunk_rel.h
@@ -0,0 +1,32 @@
+/*
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _outer_config
+#define _outer_config
+
+#include "sc520_spunk.h"
+
+#undef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTCOMMAND	"fsload boot/vmlinuz ; bootm" 
+
+#endif
diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h
index 5aec47af6b5..80cfe8a1990 100644
--- a/include/configs/utx8245.h
+++ b/include/configs/utx8245.h
@@ -51,16 +51,39 @@
 #define CONFIG_UTX8245		1
 #define DEBUG				1
 
+#define CONFIG_IDENT_STRING     " [UTX5] "
+
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		57600
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define CONFIG_BOOTDELAY	5
+#define CONFIG_BOOTDELAY	2
 #define CONFIG_AUTOBOOT_PROMPT 	"autoboot in %d seconds\n"
-#define CONFIG_BOOTCOMMAND	"bootm FF920000 FF800000"	/* autoboot command	*/
+#define CONFIG_BOOTCOMMAND	"run nfsboot"	/* autoboot command	*/
 #define CONFIG_BOOTARGS		"root=/dev/ram console=ttyS0,57600" /* RAMdisk */
-#define CONFIG_ETHADDR		41:52:4c:61:00:01	/* MAC address */
-#define CONFIG_SERVERIP		10.8.17.105
+#define CONFIG_ETHADDR		00:AA:00:14:00:05	/* UTX5 */
+#define CONFIG_SERVERIP		10.8.17.105	/* Spree */
+#define CFG_TFTP_LOADADDR	10000
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"kernel_addr=FFA00000\0" \
+	"ramdisk_addr=FF800000\0" \
+	"u-boot_startaddr=FFB00000\0" \
+	"u-boot_endaddr=FFB2FFFF\0" \
+	"nfsargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/nfs rw \
+nfsroot=$(nfsrootip):$(rootpath) ip=dhcp\0" \
+	"ramargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/ram0\0" \
+	"smargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/mtdblock1 ro\0" \
+	"fwargs=setenv bootargs console=ttyS0,$(baudrate) root=/dev/sda2 ro\0" \
+	"nfsboot=run nfsargs;bootm $(kernel_addr)\0" \
+	"ramboot=run ramargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
+	"smboot=run smargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
+	"fwboot=run fwargs;bootm $(kernel_addr) $(ramdisk_addr)\0" \
+	"update_u-boot=tftp $(loadaddr) /bdi2000/u-boot.bin;protect off \
+$(u-boot_startaddr) $(u-boot_endaddr);era $(u-boot_startaddr) \
+$(u-boot_endaddr);cp.b $(loadaddr) $(u-boot_startaddr) $(filesize);\
+protect on $(u-boot_startaddr) $(u-boot_endaddr)"
+
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_COMMANDS		(CFG_CMD_DFL | CFG_CMD_BDI | CFG_CMD_PCI \
@@ -70,7 +93,8 @@
 								| CFG_CMD_IMI | CFG_CMD_CACHE \
 								| CFG_CMD_RUN | CFG_CMD_ECHO \
 								| CFG_CMD_REGINFO | CFG_CMD_NET\
-								| CFG_CMD_DHCP)
+								| CFG_CMD_DHCP | CFG_CMD_I2C \
+								| CFG_CMD_DATE)
 
 /* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
  */
@@ -80,9 +104,9 @@
 /*
  * Miscellaneous configurable options
  */
-#define CFG_LONGHELP			/* undef to save memory		*/
-#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#define CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_PROMPT	"=> "			/* Monitor Command Prompt	*/
+#define CFG_CBSIZE	256				/* Console I/O Buffer Size	*/
 
 /* Print Buffer Size */
 #define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
@@ -101,12 +125,20 @@
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
+#define CONFIG_EEPRO100_SROM_WRITE
+
+#define PCI_ENET0_IOADDR	0xF0000000
+#define PCI_ENET0_MEMADDR	0xF0000000
 
-#define PCI_ENET0_IOADDR	0x80000000
+#define PCI_FIREWIRE_IOADDR		0xF1000000
+#define PCI_FIREWIRE_MEMADDR	0xF1000000
+/*
+#define PCI_ENET0_IOADDR	0xFE000000
 #define PCI_ENET0_MEMADDR	0x80000000
+
 #define PCI_FIREWIRE_IOADDR	0x81000000
 #define PCI_FIREWIRE_MEMADDR	0x81000000
-
+*/
 
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
@@ -114,12 +146,13 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE	    0x00000000
-#define CFG_MAX_RAM_SIZE    0x10000000	/* amount of SDRAM  */
-
+#define CFG_MAX_RAM_SIZE    0x10000000	/* 256MB  */
+/*#define CFG_VERY_BIG_RAM	1 */
 
-/* even though FLASHP_BASE is FF800000, with 2MB on RCS0, the
- * reset vector is actually located at FF800100, but the 8245
- * takes care of us.
+/* FLASH_BASE is FF800000, with 4MB on RCS0, but the reset vector
+ * is actually located at FFF00100.  Therefore, U-Boot is
+ * physically located at 0xFFB0_0000, but is also mirrored at
+ * 0xFFF0_0000.
  */
 #define CFG_RESET_ADDRESS   0xFFF00100
 
@@ -132,17 +165,19 @@
 
 /*#define CFG_DRAM_TEST		1 */
 #define CFG_MEMTEST_START   0x00003000	/* memtest works on	0...256 MB	*/
-#define CFG_MEMTEST_END	    0x0ff8ffa8	/* in SDRAM, skips exception */
+#define CFG_MEMTEST_END	    0x0ff8ffa7	/* in SDRAM, skips exception */
 										/* vectors and U-Boot */
 
 
 /*--------------------------------------------------------------------
  * Definitions for initial stack pointer and data area
  *------------------------------------------------------------------*/
-#define CFG_GBL_DATA_SIZE    128	/* Size in bytes reserved for */
+#define CFG_INIT_DATA_SIZE    128	/* Size in bytes reserved for */
 									/* initial data */
 #define CFG_INIT_RAM_ADDR     0x40000000
 #define CFG_INIT_RAM_END      0x1000
+#define CFG_INIT_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_INIT_DATA_SIZE)
+#define CFG_GBL_DATA_SIZE	128
 #define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 
 /*--------------------------------------------------------------------
@@ -153,10 +188,16 @@
 
 #define CFG_NS16550_REG_SIZE	1
 
-#define CFG_NS16550_CLK		get_bus_freq(0)
+#if (CONFIG_CONS_INDEX == 1 || CONFIG_CONS_INDEX == 2)
+#	define CFG_NS16550_CLK		get_bus_freq(0)
+#else
+#	define CFG_NS16550_CLK 33000000
+#endif
 
 #define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4500)
 #define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4600)
+#define CFG_NS16550_COM3	0xFF000000
+#define CFG_NS16550_COM4	0xFF000008
 
 /*--------------------------------------------------------------------
  * Low Level Configuration Settings
@@ -168,46 +209,61 @@
 #define CONFIG_SYS_CLK_FREQ  33000000
 #define CFG_HZ				1000
 
-#define CFG_ETH_DEV_FN	     0x7800
-#define CFG_ETH_IOBASE	     0x00104000
+/*#define CFG_ETH_DEV_FN	     0x7800 */
+/*#define CFG_ETH_IOBASE	     0x00104000 */
+
+/*--------------------------------------------------------------------
+ * I2C Configuration
+ *------------------------------------------------------------------*/
+#if 1
+#define CONFIG_HARD_I2C		1		/* To enable I2C support	*/
+#undef  CONFIG_SOFT_I2C				/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000		/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+#endif
 
+#define CONFIG_RTC_PCF8563	1		/* enable I2C support for */
+									/* Philips PCF8563 RTC */
+#define CFG_I2C_RTC_ADDR	0x51	/* Philips PCF8563 RTC address */
 
 /*--------------------------------------------------------------------
  *	Memory Control Configuration Register values
  *	- see sec. 4.12 of MPC8245 UM
  *------------------------------------------------------------------*/
 
-/* MCCR1 */
+/**** MCCR1 ****/
 #define CFG_ROMNAL	    0
-#define CFG_ROMFAL	    2			/* (tacc=70ns)*mem_freq - 2 */
-#define CFG_BANK0_ROW	2			/* SDRAM bank 7-0 row address */
-#define CFG_BANK1_ROW	2			/* 	bit count */
-#define CFG_BANK2_ROW	0
-#define CFG_BANK3_ROW	0
-#define CFG_BANK4_ROW	0
+#define CFG_ROMFAL	    10		/* (tacc=70ns)*mem_freq - 2,
+									mem_freq = 100MHz */
+
+#define CFG_BANK7_ROW	0		/* SDRAM bank 7-0 row address */
+#define CFG_BANK6_ROW	0		/* 	bit count */
 #define CFG_BANK5_ROW	0
-#define CFG_BANK6_ROW	0
-#define CFG_BANK7_ROW	0
+#define CFG_BANK4_ROW	0
+#define CFG_BANK3_ROW	0
+#define CFG_BANK2_ROW	0
+#define CFG_BANK1_ROW	2
+#define CFG_BANK0_ROW	2
 
-/* MCCR2, refresh interval clock cycles */
+/**** MCCR2, refresh interval clock cycles ****/
 #define CFG_REFINT	    480	    /* 33 MHz SDRAM clock was 480 */
 
-/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4 */
+/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
 #define CFG_BSTOPRE	    1023	/* burst to precharge[0..9], */
 								/* sets open page interval */
 
-/* MCCR3 */
-#define CFG_REFREC	    5	    /* Refresh to activate interval, trc */
+/**** MCCR3 ****/
+#define CFG_REFREC	    7	    /* Refresh to activate interval, trc */
 
-/* MCCR4 */
+/**** MCCR4 ****/
 #define CFG_PRETOACT	    2	    /* trp */
-#define CFG_ACTTOPRE	    7	    /* trcd + (burst length - 1) + tdrl */
+#define CFG_ACTTOPRE	    7	    /* trcd + (burst length - 1) + trdl */
 #define CFG_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
 #define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type, sequential */
 #define CFG_ACTORW	    	2		/* trcd min */
 #define CFG_DBUS_SIZE2		1		/* set for 8-bit RCS1, clear for 32,64 */
 #define CFG_REGISTERD_TYPE_BUFFER 1
-#define CFG_EXTROM	    1
+#define CFG_EXTROM	    0			/* we don't need extended ROM space */
 #define CFG_REGDIMM	    0
 
 /* calculate according to formula in sec. 6-22 of 8245 UM */
@@ -216,10 +272,18 @@
 									/* was 45 */
 
 #define CFG_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note */
-								/* bottom 3 bits MUST be 0 */
+								/* bits 7,6, and 3-0 MUST be 0 */
 
+#if 0
 #define CFG_DLL_MAX_DELAY	0x04
+#else
+#define CFG_DLL_MAX_DELAY	0
+#endif
+#if 0							/* need for 33MHz SDRAM */
 #define CFG_DLL_EXTEND	0x80
+#else
+#define CFG_DLL_EXTEND	0
+#endif
 #define CFG_PCI_HOLD_DEL 0x20
 
 
@@ -255,29 +319,34 @@
 #define CFG_BANK7_END	    0x3fffffff
 #define CFG_BANK7_ENABLE    0
 
-/*--------------------------------------------------------------------
- * 4.4 - Output Driver Control Register
- *------------------------------------------------------------------*/
+/*--------------------------------------------------------------------*/
+/* 4.4 - Output Driver Control Register */
+/*--------------------------------------------------------------------*/
 #define CFG_ODCR	    0xe5
 
-/*--------------------------------------------------------------------
- * 4.8 - Error Handling Registers
- *------------------------------------------------------------------*/
+/*--------------------------------------------------------------------*/
+/* 4.8 - Error Handling Registers */
+/*-------------------------------CFG_SDMODE_BURSTLEN-------------------------------------*/
 #define CFG_ERRENR1	0x11	/* enable SDRAM refresh overflow error */
 
 /* SDRAM 0-256 MB */
 #define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+/*#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT) */
 #define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 
 /* stack in dcache */
 #define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 
+
+#define CFG_IBAT2L  (CFG_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT2U  (CFG_SDRAM_BASE + 0x10000000| BATU_BL_256M | BATU_VS | BATU_VP)
+
 /* PCI memory */
-#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+/*#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) */
+/*#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) */
 
-/* Flash, config addrs, etc. */
+/*Flash, config addrs, etc. */
 #define CFG_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
 #define CFG_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 
@@ -298,26 +367,30 @@
 #define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
 
 /*-----------------------------------------------------------------------
- * FLASH organization (AMD AM29LV116D)
- */
+ * FLASH organization
+ *----------------------------------------------------------------------*/
 #define CFG_FLASH_BASE	    0xFF800000
+#define CFG_MAX_FLASH_BANKS	1			/* Max number of flash banks */
 
-#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks */
-#define CFG_MAX_FLASH_SECT	35	/* Max number of sectors in one bank */
-
-#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
-
-	/* Warning: environment is not EMBEDDED in the U-Boot code.
-	 * It's stored in flash separately.
-	 */
+/*	NOTE: environment is not EMBEDDED in the u-boot code.
+	It's stored in flash in its own separate sector.  */
 #define CFG_ENV_IS_IN_FLASH	    1
 
+#if 1	/* AMD AM29LV033C */
+#define CFG_MAX_FLASH_SECT	64		/* Max number of sectors in one bank */
+#define CFG_ENV_ADDR		0xFFBF0000	/* flash sector SA63 */
+#define CFG_ENV_SECT_SIZE	(64*1024)	/* Size of the Environment Sector */
+#else	/* AMD AM29LV116D */
+#define CFG_MAX_FLASH_SECT	35	/* Max number of sectors in one bank */
 #define CFG_ENV_ADDR		0xFF9FA000	/* flash sector SA33 */
-#define CFG_ENV_SIZE		0x2000		/* Size of the Environment */
+#define CFG_ENV_SECT_SIZE	(8*1024)	/* Size of the Environment Sector */
+#endif /* #if */
+
+#define CFG_ENV_SIZE		CFG_ENV_SECT_SIZE		/* Size of the Environment */
 #define CFG_ENV_OFFSET		0			/* starting right at the beginning */
-#define CFG_ENV_SECT_SIZE	0x2000 		/* Size of the Environment Sector */
 
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
 
 #if CFG_MONITOR_BASE >= CFG_FLASH_BASE
 #undef CFG_RAMBOOT
diff --git a/include/flash.h b/include/flash.h
index 2693a353203..6410f2f6bf0 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -134,6 +134,7 @@ extern int flash_real_protect(flash_info_t *info, long sector, int prot);
 #define AMD_ID_F016D	0xAD		/* 29F016  ID  ( 2 M x 8)		*/
 #define AMD_ID_F032B	0x41		/* 29F032  ID  ( 4 M x 8)		*/
 #define AMD_ID_LV116DT	0xC7		/* 29LV116DT   ( 2 M x 8, top boot sect) */
+#define AMD_ID_LV016B	0xc8		/* 29LV016 ID  ( 2 M x 8)		*/
 
 #define AMD_ID_LV400T	0x22B922B9	/* 29LV400T ID ( 4 M, top boot sector)	*/
 #define AMD_ID_LV400B	0x22BA22BA	/* 29LV400B ID ( 4 M, bottom boot sect)	*/
diff --git a/include/i8042.h b/include/i8042.h
index 61c9da2ea15..f77239fddef 100644
--- a/include/i8042.h
+++ b/include/i8042.h
@@ -26,6 +26,13 @@
 #ifndef _I8042_H_
 #define _I8042_H_
 
+#ifdef __I386__
+#include <common.h>
+#include <asm/io.h>
+#define in8(p) inb(p)
+#define out8(p,v) outb(v,p)
+#endif
+
 /* defines */
 
 #define I8042_DATA_REG      (CFG_ISA_IO + 0x0060)    /* keyboard i/o buffer */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 4425187213a..678bef736a9 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -114,8 +114,6 @@ struct nand_chip {
 	unsigned long mfr; /* Flash IDs - only one type of flash per device */
 	unsigned long id;
 	char* name;
-	struct NFTLrecord nftl;
-	int nftl_found;
 	int numchips;
 	char page256;
 	char pageadrlen;
@@ -195,4 +193,6 @@ struct nand_flash_dev {
 #define NAND_JFFS2_OOB8_FSDALEN		2
 #define NAND_JFFS2_OOB16_FSDALEN	8
 
+void nand_probe(unsigned long physadr);
+
 #endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/mtd/nand_ids.h b/include/linux/mtd/nand_ids.h
index 6b733be081d..a73bff0807d 100644
--- a/include/linux/mtd/nand_ids.h
+++ b/include/linux/mtd/nand_ids.h
@@ -37,6 +37,7 @@ static struct nand_flash_dev nand_flash_ids[] = {
 	{"Toshiba TC58V32DC",     NAND_MFR_TOSHIBA, 0xe5, 22, 0, 2, 0x2000},
 	{"Toshiba TC58V64AFT/DC", NAND_MFR_TOSHIBA, 0xe6, 23, 0, 2, 0x2000},
 	{"Toshiba TC58V16BDC",    NAND_MFR_TOSHIBA, 0xea, 21, 1, 2, 0x1000},
+	{"Toshiba TH58100FT",     NAND_MFR_TOSHIBA, 0x79, 27, 0, 3, 0x4000},
 	{"Samsung KM29N16000",    NAND_MFR_SAMSUNG, 0x64, 21, 1, 2, 0x1000},
 	{"Samsung unknown 4Mb",   NAND_MFR_SAMSUNG, 0x6b, 22, 0, 2, 0x2000},
 	{"Samsung KM29U128T",     NAND_MFR_SAMSUNG, 0x73, 24, 0, 2, 0x4000},
diff --git a/include/pci.h b/include/pci.h
index e5055b17534..458be233e4a 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -462,6 +462,8 @@ int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev);
 
 extern pci_dev_t pci_find_device (unsigned int vendor, unsigned int device, int index);
 extern pci_dev_t pci_find_devices (struct pci_device_id *ids, int index);
+extern pci_dev_t pci_find_class(int wanted_class, int wanted_sub_code,
+				int wanted_prog_if, int index);
 
 extern int pci_hose_config_device(struct pci_controller *hose,
 				  pci_dev_t dev,