Merge branch 'master' of http://www.denx.de/git/u-boot

3 files changed, 379 insertions, 1 deletions

diff --git a/include/common.h b/include/common.h
index 6a7444279ff..349d5cf726b 100644
--- a/include/common.h
+++ b/include/common.h
@@ -320,7 +320,8 @@ void	board_ether_init (void);
 
 #if defined(CONFIG_RPXCLASSIC)	|| defined(CONFIG_MBX) || \
     defined(CONFIG_IAD210)	|| defined(CONFIG_XPEDITE1K) || \
-    defined(CONFIG_METROBOX)    || defined(CONFIG_KAREF)
+    defined(CONFIG_METROBOX)    || defined(CONFIG_KAREF) || \
+    defined(CONFIG_V38B)
 void	board_get_enetaddr (uchar *addr);
 #endif
 
diff --git a/include/configs/V38B.h b/include/configs/V38B.h
new file mode 100644
index 00000000000..8eea504742a
--- /dev/null
+++ b/include/configs/V38B.h
@@ -0,0 +1,368 @@
+/*
+ * (C) Copyright 2003-2004 Wolfgang Denk, DENX Software Engineering,
+ * wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this project.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#if 0
+#define DEBUG 0xFFF
+#endif
+
+#if 0
+#define DEBUG 0x01
+#endif
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+*/
+
+#define CONFIG_MPC5xxx			1	/* This is an MPC5xxx CPU	*/
+#define CONFIG_MPC5200			1	/* This is an MPC5200 CPU	*/
+#define CONFIG_V38B			1	/* ... on V38B board		*/
+#define CFG_MPC5XXX_CLKIN	33000000	/* ... running at 33.000000MHz	*/
+
+#define CONFIG_RTC_PCF8563		1	/* has PCF8563 RTC		*/
+#define CONFIG_MPC5200_DDR		1	/* has DDR SDRAM		*/
+#define CONFIG_HW_WATCHDOG		1	/* has watchdog			*/
+
+#define CONFIG_NETCONSOLE		1
+
+#define CONFIG_BOARD_EARLY_INIT_R	1	/* make flash read/write	*/
+
+#define CFG_XLB_PIPELINING		1	/* gives better performance	*/
+
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1	*/
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps	*/
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+
+/*
+ * DDR
+ */
+#define SDRAM_DDR		1	/* is DDR */
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE		0x018D0000
+#define SDRAM_EMODE		0x40090000
+#define SDRAM_CONTROL		0x704f0f00
+#define SDRAM_CONFIG1		0x73722930
+#define SDRAM_CONFIG2		0x47770000
+#define SDRAM_TAPDELAY		0x10000000
+
+
+/*
+ * PCI - no suport
+ */
+#undef CONFIG_PCI
+
+/*
+ * Partitions
+ */
+#define CONFIG_MAC_PARTITION	1
+#define CONFIG_DOS_PARTITION	1
+
+/*
+ * USB
+ */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL | \
+				 CFG_CMD_FAT	| \
+				 CFG_CMD_I2C	| \
+				 CFG_CMD_IDE	| \
+				 CFG_CMD_PING	| \
+				 CFG_CMD_DHCP	| \
+				 CFG_CMD_DIAG	| \
+				 CFG_CMD_IRQ	| \
+				 CFG_CMD_JFFS2	| \
+				 CFG_CMD_MII	| \
+				 CFG_CMD_SDRAMi | \
+				 CFG_CMD_DATE	| \
+				 CFG_CMD_USB	| \
+				 CFG_CMD_FAT)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Boot low with 16 MB Flash
+ */
+#   define CFG_LOWBOOT		1
+#   define CFG_LOWBOOT16	1
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"devno=5\0"							\
+	"hostname=V38B_$(devno)\0"					\
+	"ipaddr=10.100.99.$(devno)\0"					\
+	"netmask=255.255.0.0\0"						\
+	"serverip=10.100.10.90\0"					\
+	"gatewayip=10.100.254.254\0"					\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"rootpath=/opt/eldk/ppc_6xx\0"					\
+	"bootfile=mpc5200/uImage\0"					\
+	"bootcmd=run net_nfs\0"						\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):"		\
+		"$(netmask):$(hostname):$(netdev):off panic=1\0"	\
+	"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0"		\
+	"flash_self=run ramargs addip;bootm $(kernel_addr) "		\
+		"$(ramdisk_addr)\0"					\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs "			\
+		"addip;bootm\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	""
+
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+
+#if defined(CONFIG_MPC5200)
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef CFG_IPBSPEED_133			/* define for 133MHz speed */
+#endif
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CFG_I2C_MODULE		2	/* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED		100000 /* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_PAGE_WRITE_BITS	3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	70
+
+/*
+ * RTC configuration
+ */
+#define CFG_I2C_RTC_ADDR		0x51
+
+/*
+ * Flash configuration - use CFI driver
+ */
+#define CFG_FLASH_CFI		1		/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1		/* Use the common driver */
+#define CFG_FLASH_CFI_AMD_RESET 1
+#define CFG_FLASH_BASE		0xFF000000
+#define CFG_MAX_FLASH_BANKS	1		/* max num of flash banks */
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#define CFG_FLASH_SIZE		0x01000000	/* 16 MiB */
+#define CFG_MAX_FLASH_SECT	256		/* max num of sects on one chip */
+#define CFG_FLASH_USE_BUFFER_WRITE	1	/* flash write speed-up */
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
+#define CFG_ENV_SIZE		0x10000
+#define CFG_ENV_SECT_SIZE	0x10000
+#define CONFIG_ENV_OVERWRITE	1
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_DEFAULT_MBAR	0x80000000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#define CFG_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC	1
+#define CONFIG_PHY_ADDR		0x00
+#define CONFIG_MII		1
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG	0x90000404
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	    */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+#else
+#define CFG_HID0_INIT		0
+#define CFG_HID0_FINAL		0
+#endif
+
+
+#define CFG_BOOTCS_START	CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG		0x00047801
+#define CFG_CS0_START		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x33333333
+
+#define CFG_RESET_ADDRESS	0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK	0x0001BBBB
+#define CONFIG_USB_CONFIG	0x00001000
+
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef	CONFIG_IDE_8xx_PCCARD		/* Don't use IDE with PC Card	Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+
+#define CONFIG_IDE_RESET		/* reset for ide supported	*/
+#define CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(0x0060)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	(0x005C)
+
+/* Interval between registers						     */
+#define CFG_ATA_STRIDE		4
+
+/* Status LED						     */
+
+#define	 CONFIG_STATUS_LED		 /* Status LED enabled		 */
+#define	 CONFIG_BOARD_SPECIFIC_LED	 /* version has board specific leds */
+
+#define CFG_LED_BASE	(0xf0000600 + 0x70)	/* Timer 7 GPIO */
+
+#ifndef __ASSEMBLY__
+/* LEDs */
+typedef unsigned int led_id_t;
+
+#define __led_toggle(_msk) \
+	do { \
+		*((volatile long *) (CFG_LED_BASE)) ^= (_msk); \
+	} while(0)
+
+#define __led_set(_msk, _st) \
+	do { \
+		if ((_st)) \
+			*((volatile long *) (CFG_LED_BASE)) &= ~(_msk); \
+		else \
+			*((volatile long *) (CFG_LED_BASE)) |= (_msk); \
+	} while(0)
+
+#define __led_init(_msk, st) \
+	{ \
+		*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
+	}
+
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/status_led.h b/include/status_led.h
index a56883b9a5e..db4c60fe3f3 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -346,6 +346,15 @@ void status_led_set  (int led, int state);
 #elif defined(CONFIG_NIOS2)
 /* XXX empty just to avoid the error */
 /************************************************************************/
+#elif defined(CONFIG_V38B)
+
+# define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */
+# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
+# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
+
 #else
 # error Status LED configuration missing
 #endif