diff options
author | Scott Sweeny <scott.sweeny@timesys.com> | 2009-04-29 11:19:44 -0400 |
---|---|---|
committer | Scott Sweeny <scott.sweeny@timesys.com> | 2009-04-29 11:19:44 -0400 |
commit | 1f6422345c3594647eb16e33194be62906dbdc22 (patch) | |
tree | a1b5a9cb51216df1b6ccdd434bfef6788627ed28 /include | |
parent | e6b6d16de73de6a76e2ec4338291e828b860f040 (diff) |
Add support for OMAP3430 Labrador
This patch originally from LogicPD OMAP35x Release 1.5.0
Original Patch Name: u-boot-1.1.4-omap3430-labrador.patch
Diffstat (limited to 'include')
240 files changed, 27357 insertions, 3355 deletions
diff --git a/include/405_mal.h b/include/405_mal.h index 69d20c98ffd..05985869534 100644 --- a/include/405_mal.h +++ b/include/405_mal.h @@ -92,11 +92,21 @@ #define MAL_ESR_PBEI 0x00000001 /* ^^ ^^ */ /* Mal IER */ +#ifdef CONFIG_440SPE +#define MAL_IER_PT 0x00000080 +#define MAL_IER_PRE 0x00000040 +#define MAL_IER_PWE 0x00000020 +#define MAL_IER_DE 0x00000010 +#define MAL_IER_OTE 0x00000004 +#define MAL_IER_OE 0x00000002 +#define MAL_IER_PE 0x00000001 +#else #define MAL_IER_DE 0x00000010 #define MAL_IER_NE 0x00000008 #define MAL_IER_TE 0x00000004 #define MAL_IER_OPBE 0x00000002 #define MAL_IER_PLBE 0x00000001 +#endif /* MAL Channel Active Set and Reset Registers */ #define MAL_TXRX_CASR (0x80000000) diff --git a/include/asm-arm/arch-arm1136/clocks.h b/include/asm-arm/arch-arm1136/clocks.h index 2a95af1810b..8e00d2e3e9a 100644 --- a/include/asm-arm/arch-arm1136/clocks.h +++ b/include/asm-arm/arch-arm1136/clocks.h @@ -22,91 +22,30 @@ #define _OMAP24XX_CLOCKS_H_ #define COMMIT_DIVIDERS 0x1 - #define MODE_BYPASS_FAST 0x2 #define APLL_LOCK 0xc -#ifdef CONFIG_APTIX -#define DPLL_LOCK 0x1 /* stay in bypass mode */ -#else #define DPLL_LOCK 0x3 /* DPLL lock */ -#endif +#define LDELAY 12000000 -/****************************************************************************; -; PRCM Scheme II -; -; Enable clocks and DPLL for: -; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50 -; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] -; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0] -; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0] -; DSPI=100 6 CM_CLKSEL_DSP[6:5] -; DSP_S bypass CM_CLKSEL_DSP[7] -; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8] -; IVAF=100 auto -; IVAI auto -; IVA_MPU auto -; IVA_S bypass CM_CLKSEL_DSP[13] -; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0] -; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20] -; SSI_SSTF=100 auto -; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0] -; L4=100Mhz 6 -; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5] -***************************************************************************/ -#define II_DPLL_OUT_X2 0x2 /* x2 core out */ -#define II_MPU_DIV 0x2 /* mpu = core/2 */ -#define II_DSP_DIV 0x343 /* dsp & iva divider */ -#define II_GFX_DIV 0x2 -#define II_BUS_DIV 0x04601026 -#define II_DPLL_300 0x01832100 +#if defined(CONFIG_OMAP242X) +#include <asm/arch/clocks242x.h> +#elif defined(CONFIG_OMAP243X) +#include <asm/arch/clocks243x.h> +#endif -/****************************************************************************; -; PRCM Scheme III -; -; Enable clocks and DPLL for: -; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266 -; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] -; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0] -; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0] -; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5] -; DSP_S ACTIVATED CM_CLKSEL_DSP[7] -; IVAF=88.67 (dsp domain) /3 CM_CLKSEL_DSP[12:8] -; IVAF=88.67 auto -; IVAI auto -; IVA_MPU auto -; IVA_S ACTIVATED CM_CLKSEL_DSP[13] -; GFXF=66.5 (gfx domain) /8 CM_CLKSEL_FGX[2:0]: -; SSI_SSRF=177.3 /3 CM_CLKSEL1_CORE[24:20] -; SSI_SSTF=88.67 auto -; L3=133Mhz (sdram) /4 CM_CLKSEL1_CORE[4:0] -; L4=66.5Mhz /8 -; C_L4_USB=33.25 /16 CM_CLKSEL1_CORE[6:5] -***************************************************************************/ -#define III_DPLL_OUT_X2 0x2 /* x2 core out */ -#define III_MPU_DIV 0x2 /* mpu = core/2 */ -#define III_DSP_DIV 0x23C3 /* dsp & iva divider sych enabled*/ -#define III_GFX_DIV 0x2 -#define III_BUS_DIV 0x08301044 -#define III_DPLL_266 0x01885500 +#define S12M 12000000 +#define S13M 13000000 +#define S19_2M 19200000 +#define S24M 24000000 +#define S26M 26000000 +#define S38_4M 38400000 -/* set defaults for boot up */ -#ifdef PRCM_CONFIG_II -# define DPLL_OUT II_DPLL_OUT_X2 -# define MPU_DIV II_MPU_DIV -# define DSP_DIV II_DSP_DIV -# define GFX_DIV II_GFX_DIV -# define BUS_DIV II_BUS_DIV -# define DPLL_VAL II_DPLL_300 -#elif PRCM_CONFIG_III -# define DPLL_OUT III_DPLL_OUT_X2 -# define MPU_DIV III_MPU_DIV -# define DSP_DIV III_DSP_DIV -# define GFX_DIV III_GFX_DIV -# define BUS_DIV III_BUS_DIV -# define DPLL_VAL III_DPLL_266 #endif -/* lock delay time out */ -#define LDELAY 12000000 -#endif + + + + + + diff --git a/include/asm-arm/arch-arm1136/clocks242x.h b/include/asm-arm/arch-arm1136/clocks242x.h new file mode 100644 index 00000000000..0ae1c4ea4fd --- /dev/null +++ b/include/asm-arm/arch-arm1136/clocks242x.h @@ -0,0 +1,147 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP242X_CLOCKS_H_ +#define _OMAP242X_CLOCKS_H_ + +/****************************************************************************; +; PRCM Scheme I +; +; Enable clocks and DPLL for: +; DPLL=330, DPLLout=660 M=1,N=55 CM_CLKSEL1_PLL[21:8] 12/2*55 +; Core=660 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] +; MPUF=330 (mpu domain) 2 CM_CLKSEL_MPU[4:0] +; DSPF=220 (dsp domain) 3 CM_CLKSEL_DSP[4:0] +; DSPI=110 6 CM_CLKSEL_DSP[6:5] +; DSP_S activated CM_CLKSEL_DSP[7] +; IVAF=165 (dsp domain) 4 CM_CLKSEL_DSP[12:8] +; IVAF=82.5 auto +; IVAI auto +; IVA_MPU auto +; IVA_S bypass CM_CLKSEL_DSP[13] +; GFXF=82.5 (gfx domain) 8 CM_CLKSEL_FGX[2:0] +; SSI_SSRF=220 3 CM_CLKSEL1_CORE[24:20] +; SSI_SSTF=110 auto +; L3=165Mhz (sdram) 4 CM_CLKSEL1_CORE[4:0] +; L4=82.5Mhz 8 +; C_L4_USB=41.25 16 CM_CLKSEL1_CORE[6:5] +***************************************************************************/ +#define I_DPLL_OUT_X2 0x2 /* x2 core out */ +#define I_MPU_DIV 0x2 /* mpu = core/2 */ +#define I_DSP_DIV 0x3c3 /* dsp & iva divider */ +#define I_GFX_DIV 0x2 +#define I_BUS_DIV 0x04601044 +#ifdef INPUT_CLK_13MHZ +#define I_DPLL_330 0x0114AC00 /* 13MHz */ +#else +#define I_DPLL_330 0x01837100 /* 12MHz */ +#endif + +/****************************************************************************; +; PRCM Scheme II <tested> +; +; Enable clocks and DPLL for: +; DPLL=300, DPLLout=600 M=1,N=50 CM_CLKSEL1_PLL[21:8] 12/2*50 +; Core=600 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] +; MPUF=300 (mpu domain) 2 CM_CLKSEL_MPU[4:0] +; DSPF=200 (dsp domain) 3 CM_CLKSEL_DSP[4:0] +; DSPI=100 6 CM_CLKSEL_DSP[6:5] +; DSP_S bypass CM_CLKSEL_DSP[7] +; IVAF=200 (dsp domain) 3 CM_CLKSEL_DSP[12:8] +; IVAF=100 auto +; IVAI auto +; IVA_MPU auto +; IVA_S bypass CM_CLKSEL_DSP[13] +; GFXF=50 (gfx domain) 12 CM_CLKSEL_FGX[2:0] +; SSI_SSRF=200 3 CM_CLKSEL1_CORE[24:20] +; SSI_SSTF=100 auto +; L3=100Mhz (sdram) 6 CM_CLKSEL1_CORE[4:0] +; L4=100Mhz 6 +; C_L4_USB=50 12 CM_CLKSEL1_CORE[6:5] +***************************************************************************/ +#define II_DPLL_OUT_X2 0x2 /* x2 core out */ +#define II_MPU_DIV 0x2 /* mpu = core/2 */ +#define II_DSP_DIV 0x343 /* dsp & iva divider */ +#define II_GFX_DIV 0x2 +#define II_BUS_DIV 0x04601026 +#ifdef INPUT_CLK_13MHZ +#define II_DPLL_300 0x0112CC00 /* 13MHz */ +#else +#define II_DPLL_300 0x01832100 /* 12MHz */ +#endif + +/****************************************************************************; +; PRCM Scheme III <tested> +; +; Enable clocks and DPLL for: +; DPLL=266, DPLLout=532 M=5+1,N=133 CM_CLKSEL1_PLL[21:8] 12/6*133=266 +; Core=532 (core domain) DPLLx2 CM_CLKSEL2_PLL[1:0] +; MPUF=266 (mpu domain) /2 CM_CLKSEL_MPU[4:0] +; DSPF=177.3 (dsp domain) /3 CM_CLKSEL_DSP[4:0] +; DSPI=88.67 /6 CM_CLKSEL_DSP[6:5] +; DSP_S ACTIVATED CM_CLKSEL_DSP[7] +; IVAF=88.67 (dsp domain) /3 CM_CLKSEL_DSP[12:8] +; IVAF=88.67 auto +; IVAI auto +; IVA_MPU auto +; IVA_S ACTIVATED CM_CLKSEL_DSP[13] +; GFXF=66.5 (gfx domain) /8 CM_CLKSEL_FGX[2:0]: +; SSI_SSRF=177.3 /3 CM_CLKSEL1_CORE[24:20] +; SSI_SSTF=88.67 auto +; L3=133Mhz (sdram) /4 CM_CLKSEL1_CORE[4:0] +; L4=66.5Mhz /8 +; C_L4_USB=33.25 /16 CM_CLKSEL1_CORE[6:5] +***************************************************************************/ +#define III_DPLL_OUT_X2 0x2 /* x2 core out */ +#define III_MPU_DIV 0x2 /* mpu = core/2 */ +#define III_DSP_DIV 0x23C3 /* dsp & iva divider sych enabled*/ +#define III_GFX_DIV 0x2 +#define III_BUS_DIV 0x08301044 +#ifdef INPUT_CLK_13MHZ +#define III_DPLL_266 0x0110AC00 /* 13MHz */ +#else +#define III_DPLL_266 0x01885500 /* 12MHz */ +#endif + +/* set defaults for boot up */ +#ifdef PRCM_CONFIG_I +# define DPLL_OUT I_DPLL_OUT_X2 +# define MPU_DIV I_MPU_DIV +# define DSP_DIV I_DSP_DIV +# define GFX_DIV I_GFX_DIV +# define BUS_DIV I_BUS_DIV +# define DPLL_VAL I_DPLL_266 +#elif PRCM_CONFIG_II +# define DPLL_OUT II_DPLL_OUT_X2 +# define MPU_DIV II_MPU_DIV +# define DSP_DIV II_DSP_DIV +# define GFX_DIV II_GFX_DIV +# define BUS_DIV II_BUS_DIV +# define DPLL_VAL II_DPLL_300 +#elif PRCM_CONFIG_III +# define DPLL_OUT III_DPLL_OUT_X2 +# define MPU_DIV III_MPU_DIV +# define DSP_DIV III_DSP_DIV +# define GFX_DIV III_GFX_DIV +# define BUS_DIV III_BUS_DIV +# define DPLL_VAL III_DPLL_266 +#endif + +#endif diff --git a/include/asm-arm/arch-arm1136/clocks243x.h b/include/asm-arm/arch-arm1136/clocks243x.h new file mode 100644 index 00000000000..18d2e467721 --- /dev/null +++ b/include/asm-arm/arch-arm1136/clocks243x.h @@ -0,0 +1,223 @@ +/* + * (C) Copyright 2005 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP243X_CLOCKS_H_ +#define _OMAP243X_CLOCKS_H_ + +/* cm_clksel core fields not ratio governed */ +#define RX_CLKSEL_DSS1 (0x10 << 8) +#define RX_CLKSEL_DSS2 (0x0 << 13) +#define RX_CLKSEL_SSI (0x5 << 20) + +/* 2430 Ratio's */ +/* 2430-Ratio Config 1 */ +#define R1_CLKSEL_L3 (4 << 0) +#define R1_CLKSEL_L4 (2 << 5) +#define R1_CLKSEL_USB (4 << 25) +#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | RX_CLKSEL_DSS2 \ + | RX_CLKSEL_DSS1 | R1_CLKSEL_L4 | R1_CLKSEL_L3 +#define R1_CLKSEL_MPU (2 << 0) +#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU +#define R1_CLKSEL_DSP (2 << 0) +#define R1_CLKSEL_DSP_IF (2 << 5) +#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF +#define R1_CLKSEL_GFX (2 << 0) +#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX +#define R1_CLKSEL_MDM (4 << 0) +#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM + +/* 2430-Ratio Config 2 */ +#define R2_CLKSEL_L3 (6 << 0) +#define R2_CLKSEL_L4 (2 << 5) +#define R2_CLKSEL_USB (2 << 25) +#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | RX_CLKSEL_DSS2 \ + | RX_CLKSEL_DSS1 | R2_CLKSEL_L4 | R2_CLKSEL_L3 +#define R2_CLKSEL_MPU (2 << 0) +#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU +#define R2_CLKSEL_DSP (2 << 0) +#define R2_CLKSEL_DSP_IF (3 << 5) +#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF +#define R2_CLKSEL_GFX (2 << 0) +#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX +#define R2_CLKSEL_MDM (6 << 0) +#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM + +/* 2430-Ratio Boot */ +#define RB_CLKSEL_L3 (1 << 0) +#define RB_CLKSEL_L4 (1 << 5) +#define RB_CLKSEL_USB (1 << 25) +#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | RX_CLKSEL_DSS2 \ + | RX_CLKSEL_DSS1 | RB_CLKSEL_L4 | RB_CLKSEL_L3 +#define RB_CLKSEL_MPU (1 << 0) +#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU +#define RB_CLKSEL_DSP (1 << 0) +#define RB_CLKSEL_DSP_IF (1 << 5) +#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF +#define RB_CLKSEL_GFX (1 << 0) +#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX +#define RB_CLKSEL_MDM (1 << 0) +#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM + +/* 2430 Target modes: Along with each configuration the CPU has several modes + * which goes along with them. Modes mainly are the addition of descrite DPLL + * combinations to go along with a ratio. + */ +/* hardware goverend */ +#define MX_48M_SRC (0 << 3) +#define MX_54M_SRC (0 << 5) +#define MX_APLLS_CLIKIN_12 (3 << 23) +#define MX_APLLS_CLIKIN_13 (2 << 23) +#define MX_APLLS_CLIKIN_19_2 (0 << 23) + +/* 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed */ + +/* boot (boot) */ +#define MB_DPLL_MULT (1 << 12) +#define MB_DPLL_DIV (0 << 8) +#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV \ + | MB_DPLL_MULT | MX_APLLS_CLIKIN_12 + +#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV \ + | MB_DPLL_MULT | MX_APLLS_CLIKIN_13 + +#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV \ + | MB_DPLL_MULT | MX_APLLS_CLIKIN_19 + +/* #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz */ + +#define M2_DPLL_MULT_12 (55 << 12) +#define M2_DPLL_DIV_12 (1 << 8) +#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | M2_DPLL_DIV_12 \ + | M2_DPLL_MULT_12 | MX_APLLS_CLIKIN_12 +/* Use 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, relock time issue */ +#define M2_DPLL_MULT_13 (330 << 12) +#define M2_DPLL_DIV_13 (12 << 8) +#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | M2_DPLL_DIV_13 \ + | M2_DPLL_MULT_13 | MX_APLLS_CLIKIN_13 +#define M2_DPLL_MULT_19 (275 << 12) +#define M2_DPLL_DIV_19 (15 << 8) +#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | M2_DPLL_DIV_19 \ + | M2_DPLL_MULT_19 | MX_APLLS_CLIKIN_19_2 + +/* #3 (ratio2) DPLL = 330*2 = 660MHz, L3=110MHz */ +#define M3_DPLL_MULT_12 (55 << 12) +#define M3_DPLL_DIV_12 (1 << 8) +#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | M3_DPLL_DIV_12 \ + | M3_DPLL_MULT_12 | MX_APLLS_CLIKIN_12 +#define M3_DPLL_MULT_13 (330 << 12) +#define M3_DPLL_DIV_13 (12 << 8) +#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | M3_DPLL_DIV_13 \ + | M3_DPLL_MULT_13 | MX_APLLS_CLIKIN_13 +#define M3_DPLL_MULT_19 (275 << 12) +#define M3_DPLL_DIV_19 (15 << 8) +#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | M3_DPLL_DIV_19 \ + | M3_DPLL_MULT_19 | MX_APLLS_CLIKIN_19_2 + +/* #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz*/ +#define M4_DPLL_MULT_12 (133 << 12) +#define M4_DPLL_DIV_12 (3 << 8) +#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | M4_DPLL_DIV_12 \ + | M4_DPLL_MULT_12 | MX_APLLS_CLIKIN_12 +#define M4_DPLL_MULT_13 (399 << 12) +#define M4_DPLL_DIV_13 (12 << 8) +#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | M4_DPLL_DIV_13 \ + | M4_DPLL_MULT_13 | MX_APLLS_CLIKIN_13 +#define M4_DPLL_MULT_19 (145 << 12) +#define M4_DPLL_DIV_19 (6 << 8) +#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | M4_DPLL_DIV_19 \ + | M4_DPLL_MULT_19 | MX_APLLS_CLIKIN_19_2 + +/* #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz, L3=133MHz */ +#define M5A_DPLL_MULT_12 (133 << 12) +#define M5A_DPLL_DIV_12 (5 << 8) +#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | M5A_DPLL_DIV_12 \ + | M5A_DPLL_MULT_12 | MX_APLLS_CLIKIN_12 +#define M5A_DPLL_MULT_13 (266 << 12) +#define M5A_DPLL_DIV_13 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | M5A_DPLL_DIV_13 \ + | M5A_DPLL_MULT_13 | MX_APLLS_CLIKIN_13 +#define M5A_DPLL_MULT_19 (180 << 12) +#define M5A_DPLL_DIV_19 (12 << 8) +#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | M5A_DPLL_DIV_19 \ + | M5A_DPLL_MULT_19 | MX_APLLS_CLIKIN_19_2 + +/* #5b (ratio1) target DPLL = 200*2 = 400MHz, L3=100MHz */ +#define M5B_DPLL_MULT_12 (50 << 12) +#define M5B_DPLL_DIV_12 (2 << 8) +#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | M5B_DPLL_DIV_12 \ + | M5B_DPLL_MULT_12 | MX_APLLS_CLIKIN_12 +#define M5B_DPLL_MULT_13 (200 << 12) +#define M5B_DPLL_DIV_13 (12 << 8) + +#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | M5B_DPLL_DIV_13 \ + | M5B_DPLL_MULT_13 | MX_APLLS_CLIKIN_13 +#define M5B_DPLL_MULT_19 (125 << 12) +#define M5B_DPLL_DIV_19 (31 << 8) +#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | M5B_DPLL_DIV_19 \ + | M5B_DPLL_MULT_19 | MX_APLLS_CLIKIN_19_2 + +/* 2430 - chassis (sedna) */ + /* 165 (ratio1) same as above #2 */ + /* 150 (ratio1)*/ + /* 133 (ratio2) same as above #4 */ + /* 110 (ratio2) same as above #3*/ + /* 104 (ratio2)*/ + /* boot (boot) */ + +/* high and low operation value */ +#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) +#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) + +/* set defaults for boot up */ +#if defined(PRCM_CONFIG_2) /* ARM-330MHz IVA2-330MHz L3-165MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R1_CLKSEL_MPU +# define DSP_DIV R1_CM_CLKSEL_DSP_VAL +# define GFX_DIV R1_CM_CLKSEL_GFX_VAL +# define BUS_DIV R1_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M2_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R2_CM_CLKSEL_MDM_VAL +#elif defined(PRCM_CONFIG_3) /* ARM-330MHz IVA2-330MHz L3-110MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R2_CLKSEL_MPU +# define DSP_DIV R2_CM_CLKSEL_DSP_VAL +# define GFX_DIV R2_CM_CLKSEL_GFX_VAL +# define BUS_DIV R2_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M3_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R2_CM_CLKSEL_MDM_VAL +#elif defined(PRCM_CONFIG_5A) /* ARM-266MHz IVA2-266MHz L3-133MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R1_CLKSEL_MPU +# define DSP_DIV R1_CM_CLKSEL_DSP_VAL +# define GFX_DIV R1_CM_CLKSEL_GFX_VAL +# define BUS_DIV R1_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M5A_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R2_CM_CLKSEL_MDM_VAL +#elif defined(PRCM_CONFIG_5B) /* ARM-200MHz IVA2-200MHz L3-100MHz */ +# define DPLL_OUT MX_CLKSEL2_PLL_2x_VAL +# define MPU_DIV R1_CLKSEL_MPU +# define DSP_DIV R1_CM_CLKSEL_DSP_VAL +# define GFX_DIV R1_CM_CLKSEL_GFX_VAL +# define BUS_DIV R1_CM_CLKSEL1_CORE_VAL +# define DPLL_VAL M5B_CM_CLKSEL1_PLL_13_VAL +# define MDM_DIV R1_CM_CLKSEL_MDM_VAL +#endif + +#endif diff --git a/include/asm-arm/arch-arm1136/cpu.h b/include/asm-arm/arch-arm1136/cpu.h new file mode 100644 index 00000000000..ff17cbccb5f --- /dev/null +++ b/include/asm-arm/arch-arm1136/cpu.h @@ -0,0 +1,188 @@ +/* + * (C) Copyright 2005 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _OMAP24XX_CPU_H +#define _OMAP24XX_CPU_H +/* CPU Specific Headers */ +#ifdef CONFIG_OMAP242X +#include <asm/arch/omap2420.h> +#endif +#ifdef CONFIG_OMAP243X +#include <asm/arch/omap2430.h> +#endif + +/* Register offsets of common modules */ +/* Control */ +#define CONTROL_STATUS (OMAP24XX_CTRL_BASE + 0x2F8) +#define OMAP24XX_MCR (OMAP24XX_CTRL_BASE + 0x8C) + +/* Tap Information */ +#define TAP_IDCODE_REG (OMAP24XX_TAP_BASE+0x204) +#define PRODUCTION_ID (OMAP24XX_TAP_BASE+0x208) + +/* device type */ +#define DEVICE_MASK (BIT8|BIT9|BIT10) +#define TST_DEVICE 0x0 +#define EMU_DEVICE 0x1 +#define HS_DEVICE 0x2 +#define GP_DEVICE 0x3 + +/* GPMC CS3/cs4/cs6 not avaliable */ +#define GPMC_SYSCONFIG (OMAP24XX_GPMC_BASE+0x10) +#define GPMC_IRQENABLE (OMAP24XX_GPMC_BASE+0x1C) +#define GPMC_TIMEOUT_CONTROL (OMAP24XX_GPMC_BASE+0x40) +#define GPMC_CONFIG (OMAP24XX_GPMC_BASE+0x50) + +#define GPMC_CONFIG_CS0 (OMAP24XX_GPMC_BASE+0x60) +#define GPMC_CONFIG_WIDTH (0x30) + +#define GPMC_CONFIG1 (0x00) +#define GPMC_CONFIG2 (0x04) +#define GPMC_CONFIG3 (0x08) +#define GPMC_CONFIG4 (0x0C) +#define GPMC_CONFIG5 (0x10) +#define GPMC_CONFIG6 (0x14) +#define GPMC_CONFIG7 (0x18) +#define GPMC_NAND_CMD (0x1C) +#define GPMC_NAND_ADR (0x20) +#define GPMC_NAND_DAT (0x24) + +/* GPMC Mapping */ +# define FLASH_BASE 0x04000000 /* NOR flash (64 Meg aligned) */ +# define DEBUG_BASE 0x08000000 /* debug board */ +# define NAND_BASE 0x0C000000 /* NAND flash */ +# define SIBLEY_MAP1 0x10000000 /* Sibley1 flash */ +# define SIBLEY_MAP2 0x14000000 /* Sibley2 flash */ +# define PCMCIA_BASE 0x18000000 /* PCMCIA region */ +# define ONENAND_MAP 0x20000000 /* OneNand flash */ + +/* SMS */ +#define SMS_SYSCONFIG (OMAP24XX_SMS_BASE+0x10) +#define SMS_CLASS_ARB0 (OMAP24XX_SMS_BASE+0xD0) +#define BURSTCOMPLETE_GROUP7 BIT31 + +/* SDRC */ +#define SDRC_SYSCONFIG (OMAP24XX_SDRC_BASE+0x10) +#define SDRC_STATUS (OMAP24XX_SDRC_BASE+0x14) +#define SDRC_CS_CFG (OMAP24XX_SDRC_BASE+0x40) +#define SDRC_SHARING (OMAP24XX_SDRC_BASE+0x44) +#define SDRC_DLLA_CTRL (OMAP24XX_SDRC_BASE+0x60) +#define SDRC_DLLA_STATUS (OMAP24XX_SDRC_BASE+0x64) +#define SDRC_DLLB_CTRL (OMAP24XX_SDRC_BASE+0x68) +#define SDRC_DLLB_STATUS (OMAP24XX_SDRC_BASE+0x6C) +#define DLLPHASE BIT1 +#define LOADDLL BIT2 +#define DLL_DELAY_MASK 0xFF00 +#define DLL_NO_FILTER_MASK (BIT8|BIT9) + +#define SDRC_POWER (OMAP24XX_SDRC_BASE+0x70) +#define SDRC_MCFG_0 (OMAP24XX_SDRC_BASE+0x80) +#define SDRC_MR_0 (OMAP24XX_SDRC_BASE+0x84) +#define SDRC_ACTIM_CTRLA_0 (OMAP24XX_SDRC_BASE+0x9C) +#define SDRC_ACTIM_CTRLB_0 (OMAP24XX_SDRC_BASE+0xA0) +#define SDRC_ACTIM_CTRLA_1 (OMAP24XX_SDRC_BASE+0xC4) +#define SDRC_ACTIM_CTRLB_1 (OMAP24XX_SDRC_BASE+0xC8) +#define SDRC_RFR_CTRL (OMAP24XX_SDRC_BASE+0xA4) +#define SDRC_MANUAL_0 (OMAP24XX_SDRC_BASE+0xA8) +#define OMAP24XX_SDRC_CS0 0x80000000 +#define OMAP24XX_SDRC_CS1 0xA0000000 +#define CMD_NOP 0x0 +#define CMD_PRECHARGE 0x1 +#define CMD_AUTOREFRESH 0x2 +#define CMD_ENTR_PWRDOWN 0x3 +#define CMD_EXIT_PWRDOWN 0x4 +#define CMD_ENTR_SRFRSH 0x5 +#define CMD_CKE_HIGH 0x6 +#define CMD_CKE_LOW 0x7 +#define SOFTRESET BIT1 +#define SMART_IDLE (0x2 << 3) +#define REF_ON_IDLE (0x1 << 6) + +/* timer regs offsets (32 bit regs) */ +#define TIDR 0x0 /* r */ +#define TIOCP_CFG 0x10 /* rw */ +#define TISTAT 0x14 /* r */ +#define TISR 0x18 /* rw */ +#define TIER 0x1C /* rw */ +#define TWER 0x20 /* rw */ +#define TCLR 0x24 /* rw */ +#define TCRR 0x28 /* rw */ +#define TLDR 0x2C /* rw */ +#define TTGR 0x30 /* rw */ +#define TWPS 0x34 /* r */ +#define TMAR 0x38 /* rw */ +#define TCAR1 0x3c /* r */ +#define TSICR 0x40 /* rw */ +#define TCAR2 0x44 /* r */ + +/* Watchdog */ +#define WWPS 0x34 /* r */ +#define WSPR 0x48 /* rw */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* PRCM */ +#define PRCM_CLKSRC_CTRL (OMAP24XX_CM_BASE+0x060) +#define PRCM_CLKOUT_CTRL (OMAP24XX_CM_BASE+0x070) +#define PRCM_CLKEMUL_CTRL (OMAP24XX_CM_BASE+0x078) +#define PRCM_CLKCFG_CTRL (OMAP24XX_CM_BASE+0x080) +#define PRCM_CLKCFG_STATUS (OMAP24XX_CM_BASE+0x084) +#define CM_CLKSEL_MPU (OMAP24XX_CM_BASE+0x140) +#define RM_RSTST_MPU (OMAP24XX_CM_BASE+0x158) +#define CM_FCLKEN1_CORE (OMAP24XX_CM_BASE+0x200) +#define CM_FCLKEN2_CORE (OMAP24XX_CM_BASE+0x204) +#define CM_ICLKEN1_CORE (OMAP24XX_CM_BASE+0x210) +#define CM_ICLKEN2_CORE (OMAP24XX_CM_BASE+0x214) +#define CM_CLKSEL1_CORE (OMAP24XX_CM_BASE+0x240) +#define CM_CLKSEL_WKUP (OMAP24XX_CM_BASE+0x440) +#define CM_CLKSEL2_CORE (OMAP24XX_CM_BASE+0x244) +#define CM_FCLKEN_GFX (OMAP24XX_CM_BASE+0x300) +#define CM_ICLKEN_GFX (OMAP24XX_CM_BASE+0x310) +#define CM_CLKSEL_GFX (OMAP24XX_CM_BASE+0x340) +#define RM_RSTCTRL_GFX (OMAP24XX_CM_BASE+0x350) +#define CM_FCLKEN_WKUP (OMAP24XX_CM_BASE+0x400) +#define CM_ICLKEN_WKUP (OMAP24XX_CM_BASE+0x410) +#define CM_CLKSEL_WKUP (OMAP24XX_CM_BASE+0x440) +#define PM_RSTCTRL_WKUP (OMAP24XX_CM_BASE+0x450) +#define CM_CLKEN_PLL (OMAP24XX_CM_BASE+0x500) +#define CM_IDLEST_CKGEN (OMAP24XX_CM_BASE+0x520) +#define CM_CLKSEL1_PLL (OMAP24XX_CM_BASE+0x540) +#define CM_CLKSEL2_PLL (OMAP24XX_CM_BASE+0x544) +#define CM_CLKSEL_DSP (OMAP24XX_CM_BASE+0x840) +#define CM_CLKSEL_MDM (OMAP24XX_CM_BASE+0xC40) + +/* SMX-APE */ +#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000) +#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400) +#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800) +#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00) + +/* IVA2 */ +#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000) + +/* I2C base */ +#define I2C_BASE1 (OMAP24XX_L4_IO_BASE + 0x70000) +#define I2C_BASE2 (OMAP24XX_L4_IO_BASE + 0x72000) + +#endif diff --git a/include/asm-arm/arch-arm1136/i2c.h b/include/asm-arm/arch-arm1136/i2c.h index 7248950e52f..a71bd7d2e56 100644 --- a/include/asm-arm/arch-arm1136/i2c.h +++ b/include/asm-arm/arch-arm1136/i2c.h @@ -23,24 +23,26 @@ #ifndef _OMAP24XX_I2C_H_ #define _OMAP24XX_I2C_H_ -#define I2C_BASE 0x48070000 -#define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */ - -#define I2C_REV (I2C_BASE + 0x00) -#define I2C_IE (I2C_BASE + 0x04) -#define I2C_STAT (I2C_BASE + 0x08) -#define I2C_IV (I2C_BASE + 0x0c) -#define I2C_BUF (I2C_BASE + 0x14) -#define I2C_CNT (I2C_BASE + 0x18) -#define I2C_DATA (I2C_BASE + 0x1c) -#define I2C_SYSC (I2C_BASE + 0x20) -#define I2C_CON (I2C_BASE + 0x24) -#define I2C_OA (I2C_BASE + 0x28) -#define I2C_SA (I2C_BASE + 0x2c) -#define I2C_PSC (I2C_BASE + 0x30) -#define I2C_SCLL (I2C_BASE + 0x34) -#define I2C_SCLH (I2C_BASE + 0x38) -#define I2C_SYSTEST (I2C_BASE + 0x3c) +/* Get the i2c base addresses */ +#include <asm/arch/cpu.h> + +#define I2C_DEFAULT_BASE I2C_BASE1 + +#define I2C_REV (0x00) +#define I2C_IE (0x04) +#define I2C_STAT (0x08) +#define I2C_IV (0x0c) +#define I2C_BUF (0x14) +#define I2C_CNT (0x18) +#define I2C_DATA (0x1c) +#define I2C_SYSC (0x20) +#define I2C_CON (0x24) +#define I2C_OA (0x28) +#define I2C_SA (0x2c) +#define I2C_PSC (0x30) +#define I2C_SCLL (0x34) +#define I2C_SCLH (0x38) +#define I2C_SYSTEST (0x3c) /* I2C masks */ @@ -104,4 +106,37 @@ #define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ #define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ +#define I2C_SCLL_SCLL (0) +#define I2C_SCLL_SCLL_M (0xFF) +#define I2C_SCLL_HSSCLL (8) +#define I2C_SCLH_HSSCLL_M (0xFF) +#define I2C_SCLH_SCLH (0) +#define I2C_SCLH_SCLH_M (0xFF) +#define I2C_SCLH_HSSCLH (8) +#define I2C_SCLH_HSSCLH_M (0xFF) + +#define OMAP_I2C_STANDARD 100 +#define OMAP_I2C_FAST_MODE 400 +#define OMAP_I2C_HIGH_SPEED 3400 + +#define SYSTEM_CLOCK_12 12000 +#define SYSTEM_CLOCK_13 13000 +#define SYSTEM_CLOCK_192 19200 +#define SYSTEM_CLOCK_96 96000 + +#ifdef CONFIG_OMAP243X +#define I2C_IP_CLK SYSTEM_CLOCK_96 +#define I2C_PSC_MAX (0x0f) +#define I2C_PSC_MIN (0x00) +#else +/* 242x */ +#ifdef INPUT_CLK_13MHZ +#define I2C_IP_CLK SYSTEM_CLOCK_13 +#else +#define I2C_IP_CLK SYSTEM_CLOCK_12 +#endif +#define I2C_PSC_MAX (0xff) +#define I2C_PSC_MIN (0x00) +#endif + #endif diff --git a/include/asm-arm/arch-arm1136/mem.h b/include/asm-arm/arch-arm1136/mem.h index c81f1c4370c..2a3da736089 100644 --- a/include/asm-arm/arch-arm1136/mem.h +++ b/include/asm-arm/arch-arm1136/mem.h @@ -1,5 +1,6 @@ + /* - * (C) Copyright 2004 + * (C) Copyright 2004-2005 * Texas Instruments, <www.ti.com> * Richard Woodruff <r-woodruff2@ti.com> * @@ -13,7 +14,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -25,8 +26,8 @@ #ifndef _OMAP24XX_MEM_H_ #define _OMAP24XX_MEM_H_ -#define SDRC_CS0_OSET 0x0 -#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */ +#define SDRC_CS0_OSET 0x0 +#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */ #ifndef __ASSEMBLY__ /* struct's for holding data tables for current boards, they are getting used @@ -48,109 +49,335 @@ typedef enum { STACKED = 0, IP_DDR = 1, COMBO_DDR = 2, - IP_SDR = 3, + IP_SDR = 3, } mem_t; #endif +/* set the 243x-SDRC incoming address convention */ +#if defined(SDRC_B_R_C) +#define B_ALL (0 << 6) /* bank-row-column */ +#elif defined(SDRC_B1_R_B0_C) +#define B_ALL (1 << 6) /* bank1-row-bank0-column */ +#elif defined(SDRC_R_B_C) +#define B_ALL (2 << 6) /* row-bank-column */ +#endif + /* Slower full frequency range default timings for x32 operation*/ #define H4_2420_SDRC_SHARING 0x00000100 #define H4_2420_SDRC_MDCFG_0_SDR 0x00D04010 /* discrete sdr module */ #define H4_2420_SDRC_MR_0_SDR 0x00000031 #define H4_2420_SDRC_MDCFG_0_DDR 0x01702011 /* descrite ddr module */ +#define SDP_2430_SDRC_MDCFG_0_DDR (0x02584019|B_ALL) /* Infin ddr module */ #define H4_2420_COMBO_MDCFG_0_DDR 0x00801011 /* combo module */ #define H4_2420_SDRC_MR_0_DDR 0x00000032 #define H4_2422_SDRC_SHARING 0x00004b00 -#define H4_2422_SDRC_MDCFG_0_DDR 0x00801011 /* stacked ddr on 2422 */ +#define H4_2422_SDRC_MDCFG_MONO_DDR 0x01A02011 /* stacked mono die ddr on 2422 */ +#define H4_2422_SDRC_MDCFG_0_DDR 0x00801011 /* stacked dual die ddr on 2422 */ #define H4_2422_SDRC_MR_0_DDR 0x00000032 +#define H4_2423_SDRC_SHARING 0x00004900 /* 2420POP board cke1 not connected */ +#define H4_2423_SDRC_MDCFG_0_DDR 0x01A02011 /* stacked dual die ddr on 2423 */ +#define H4_2423_SDRC_MDCFG_1_DDR 0x00801011 /* stacked dual die ddr on 2423 */ + /* ES1 work around timings */ #define H4_242x_SDRC_ACTIM_CTRLA_0_ES1 0x9bead909 /* 165Mhz for use with 100/133 */ -#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1 0x00000020 -#define H4_242x_SDRC_RFR_CTRL_ES1 0x00002401 /* use over refresh for ES1 */ +#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1 0x00000020 +#define H4_242x_SDRC_RFR_CTRL_ES1 0x00002401 /* use over refresh for ES1 */ /* optimized timings good for current shipping parts */ -#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485 -#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e -#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settings */ -#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */ -#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01 -#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01 -#define H4_242x_SDRC_DLLAB_CTRL_100MHz 0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/ -#define H4_242x_SDRC_DLLAB_CTRL_133MHz 0x0000690E /* 72deg, for ES2 */ - -#ifdef PRCM_CONFIG_II -# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz -#elif PRCM_CONFIG_III -# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz -# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz -# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz -# define H4_2420_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_133MHz -# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz -# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz -# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz -# define H4_2422_SDRC_DLLAB_CTRL H4_242x_SDRC_DLLAB_CTRL_100MHz +#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x5A59B485 +#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000e +#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz 0x8BA6E6C8 /* temp warn 0 settings */ +#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz 0x00000010 /* temp warn 0 settings */ +#define H4_242X_SDRC_RFR_CTRL_100MHz 0x0002da01 +#define H4_242X_SDRC_RFR_CTRL_133MHz 0x0003de01 /* 7.8us/7.5ns - 50 = 0x3de */ +#define SDP_24XX_SDRC_RFR_CTRL_165MHz 0x0004e201 /* 7.8us/6ns - 50 = 0x4e2 */ +#define H4_242X_SDRC_DLLAB_CTRL_100MHz 0x0000980E /* 90deg, allow DPLLout*1 to work (combo)*/ +#define H4_242X_SDRC_DLLAB_CTRL_133MHz 0x0000690E /* 90deg, for ES2 */ +#define SDP_24XX_SDRC_DLLAB_CTRL_165MHz 0x0000170C /* 72deg, code will recalc dll load */ + +/* Infineon part of 2430SDP (133MHz optimized) ~ 7.5ns + * TDAL = Twr/Tck + Trp/tck = 15/7.5 + 22.5/7.5 = 2 + 3 = 5 + * TDPL = 15/7.5 = 2 + * TRRD = 15/2.5 = 2 + * TRCD = 22.5/7.5 = 3 + * TRP = 22.5/7.5 = 3 + * TRAS = 45/7.5 = 6 + * TRC = 65/7.5 = 8.6->9 + * TRFC = 75/7.5 = 10 + * ACTIMB + * TCKE = 2 <new in 2430> + * XSR = 120/7.5 = 16 + */ +#define TDAL_133 5 +#define TDPL_133 2 +#define TRRD_133 2 +#define TRCD_133 3 +#define TRP_133 3 +#define TRAS_133 6 +#define TRC_133 9 +#define TRFC_133 10 +#define V_ACTIMA_133 ((TRFC_133 << 27) | (TRC_133 << 22) | (TRAS_133 << 18) |(TRP_133 << 15) | \ + (TRCD_133 << 12) |(TRRD_133 << 9) |(TDPL_133 << 6) | (TDAL_133)) + +#define TCKE_133 2 +#define XSR_133 16 +#define V_ACTIMB_133 ((TCKE_133 << 12) | (XSR_133 << 0)) + +/* Infineon part of 2430SDP (165MHz optimized) 6.06ns + * ACTIMA + * TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6 + * TDPL (Twr) = 15/6 = 2.5 -> 3 + * TRRD = 12/6 = 2 + * TRCD = 18/6 = 3 + * TRP = 18/6 = 3 + * TRAS = 42/6 = 7 + * TRC = 60/6 = 10 + * TRFC = 72/6 = 12 + * ACTIMB + * TCKE = 2 <new in 2430> + * XSR = 120/6 = 20 + */ +#define TDAL_165 6 +#define TDPL_165 3 +#define TRRD_165 2 +#define TRCD_165 3 +#define TRP_165 3 +#define TRAS_165 7 +#define TRC_165 10 +#define TRFC_165 12 +#define V_ACTIMA_165 ((TRFC_165 << 27) | (TRC_165 << 22) | (TRAS_165 << 18) |(TRP_165 << 15) | \ + (TRCD_165 << 12) |(TRRD_165 << 9) |(TDPL_165 << 6) | (TDAL_165)) + +#define TCKE_165 2 +#define XSR_165 20 +#define V_ACTIMB_165 ((TCKE_165 << 12) | (XSR_165 << 0)) + +#if defined(PRCM_CONFIG_II) || defined(PRCM_CONFIG_5B) +# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz +# define SDP_2430_SDRC_ACTIM_CTRLA_0 V_ACTIMA_133 +# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz +# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz +# define H4_2420_SDRC_DLLAB_CTRL H4_242X_SDRC_DLLAB_CTRL_100MHz +# define SDP_2430_SDRC_DLLAB_CTRL 0x0000730E +# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_100MHz +# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_100MHz +# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_100MHz +# define H4_2422_SDRC_DLLAB_CTRL H4_242X_SDRC_DLLAB_CTRL_100MHz +#elif defined(PRCM_CONFIG_III) || defined(PRCM_CONFIG_5A) || defined(PRCM_CONFIG_3) +# define H4_2420_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz +# define SDP_2430_SDRC_ACTIM_CTRLA_0 V_ACTIMA_133 +# define H4_2420_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz +# define H4_2420_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz +# define H4_2420_SDRC_DLLAB_CTRL H4_242X_SDRC_DLLAB_CTRL_133MHz +# define SDP_2430_SDRC_DLLAB_CTRL 0x0000730E +# define H4_2422_SDRC_ACTIM_CTRLA_0 H4_242X_SDRC_ACTIM_CTRLA_0_133MHz +# define H4_2422_SDRC_ACTIM_CTRLB_0 H4_242X_SDRC_ACTIM_CTRLB_0_133MHz +# define H4_2422_SDRC_RFR_CTRL H4_242X_SDRC_RFR_CTRL_133MHz +# define H4_2422_SDRC_DLLAB_CTRL H4_242X_SDRC_DLLAB_CTRL_133MHz +#elif defined(PRCM_CONFIG_I) || defined(PRCM_CONFIG_2) +# define H4_2420_SDRC_ACTIM_CTRLA_0 V_ACTIMA_165 +# define SDP_2430_SDRC_ACTIM_CTRLA_0 V_ACTIMA_165 +# define H4_2420_SDRC_ACTIM_CTRLB_0 V_ACTIMB_165 +# define H4_2420_SDRC_RFR_CTRL SDP_24XX_SDRC_RFR_CTRL_165MHz +# define H4_2420_SDRC_DLLAB_CTRL SDP_24XX_SDRC_DLLAB_CTRL_165MHz +# define SDP_2430_SDRC_DLLAB_CTRL SDP_24XX_SDRC_DLLAB_CTRL_165MHz +# define H4_2422_SDRC_ACTIM_CTRLA_0 V_ACTIMA_165 +# define H4_2422_SDRC_ACTIM_CTRLB_0 V_ACTIMB_165 +# define H4_2422_SDRC_RFR_CTRL SDP_24XX_SDRC_RFR_CTRL_165MHz +# define H4_2422_SDRC_DLLAB_CTRL SDP_24XX_SDRC_DLLAB_CTRL_165MHz #endif +/* + * GPMC settings - + * Definitions is as per the following format + * # define <PART>_GPMC_CONFIG<x> <value> + * Where: + * PART is the part name e.g. STNOR - Intel Strata Flash + * x is GPMC config registers from 1 to 6 (there will be 6 macros) + * Value is corresponding value + * + * For every valid PRCM configuration there should be only one definition of the same. + * if values are independent of the board, this definition will be present in this file + * if values are dependent on the board, then this should go into corresponding mem-boardName.h file + * + * Currently valid part Names are (PART): + * STNOR - Intel Strata Flash + * SMNAND - Samsung NAND + * MPDB - H4 MPDB board + * SBNOR - Sibley NOR + * ONNAND - Samsung One NAND + * + * include/configs/file.h contains the following defn - for all CS we are interested + * #define OMAP24XX_GPMC_CSx PART + * #define OMAP24XX_GPMC_CSx_SIZE Size + * #define OMAP24XX_GPMC_CSx_MAP Map + * Where: + * x - CS number + * PART - Part Name as defined above + * SIZE - how big is the mapping to be + * GPMC_SIZE_128M - 0x8 + * GPMC_SIZE_64M - 0xC + * GPMC_SIZE_32M - 0xE + * GPMC_SIZE_16M - 0xF + * MAP - Map this CS to which address(GPMC address space)- Absolute address + * >>24 before being used. + */ + +#define GPMC_SIZE_256M 0x0 +#define GPMC_SIZE_128M 0x8 +#define GPMC_SIZE_64M 0xC +#define GPMC_SIZE_32M 0xE +#define GPMC_SIZE_16M 0xF + +#if defined(PRCM_CONFIG_II) || defined(PRCM_CONFIG_5B) /* L3 at 100MHz */ +# define SMNAND_GPMC_CONFIG1 0x0 +# define SMNAND_GPMC_CONFIG2 0x00141400 +# define SMNAND_GPMC_CONFIG3 0x00141400 +# define SMNAND_GPMC_CONFIG4 0x0F010F01 +# define SMNAND_GPMC_CONFIG5 0x010C1414 +# define SMNAND_GPMC_CONFIG6 0x00000A80 +# define STNOR_GPMC_CONFIG1 0x3 +# define STNOR_GPMC_CONFIG2 0x000f0f01 +# define STNOR_GPMC_CONFIG3 0x00050502 +# define STNOR_GPMC_CONFIG4 0x0C060C06 +# define STNOR_GPMC_CONFIG5 0x01131F1F +# define STNOR_GPMC_CONFIG6 0x0 /* 0? Not defined so far... this value is reset val as per gpmc doc */ +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001F1F00 +# define MPDB_GPMC_CONFIG3 0x00080802 +# define MPDB_GPMC_CONFIG4 0x1C091C09 +# define MPDB_GPMC_CONFIG5 0x031A1F1F +# define MPDB_GPMC_CONFIG6 0x000003C2 +#endif + +#if defined(PRCM_CONFIG_III) || defined(PRCM_CONFIG_5A) || defined(PRCM_CONFIG_3) /* L3 at 133MHz */ +# define SMNAND_GPMC_CONFIG1 0x00001800 +# define SMNAND_GPMC_CONFIG2 0x00141400 +# define SMNAND_GPMC_CONFIG3 0x00141400 +# define SMNAND_GPMC_CONFIG4 0x0F010F01 +# define SMNAND_GPMC_CONFIG5 0x010C1414 +# define SMNAND_GPMC_CONFIG6 0x00000A80 +# define SMNAND_GPMC_CONFIG7 0x00000C44 + +# define STNOR_GPMC_CONFIG1 0x3 +# define STNOR_GPMC_CONFIG2 0x00151501 +# define STNOR_GPMC_CONFIG3 0x00060602 +# define STNOR_GPMC_CONFIG4 0x10081008 +# define STNOR_GPMC_CONFIG5 0x01131F1F +# define STNOR_GPMC_CONFIG6 0x000004c4 -/* GPMC settings */ -#ifdef PRCM_CONFIG_II /* L3 at 100MHz */ -# ifdef CFG_NAND_BOOT -# define H4_24XX_GPMC_CONFIG1_0 0x0 -# define H4_24XX_GPMC_CONFIG2_0 0x00141400 -# define H4_24XX_GPMC_CONFIG3_0 0x00141400 -# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 -# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* else NOR */ -# define H4_24XX_GPMC_CONFIG1_0 0x3 -# define H4_24XX_GPMC_CONFIG2_0 0x000f0f01 -# define H4_24XX_GPMC_CONFIG3_0 0x00050502 -# define H4_24XX_GPMC_CONFIG4_0 0x0C060C06 -# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F -# endif /* endif CFG_NAND_BOOT */ -# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) -# define H4_24XX_GPMC_CONFIG1_1 0x00011000 -# define H4_24XX_GPMC_CONFIG2_1 0x001F1F00 -# define H4_24XX_GPMC_CONFIG3_1 0x00080802 -# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define H4_24XX_GPMC_CONFIG5_1 0x031A1F1F -# define H4_24XX_GPMC_CONFIG6_1 0x000003C2 -# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) -#endif /* endif PRCM_CONFIG_II */ - -#ifdef PRCM_CONFIG_III /* L3 at 133MHz */ -# ifdef CFG_NAND_BOOT -# define H4_24XX_GPMC_CONFIG1_0 0x0 -# define H4_24XX_GPMC_CONFIG2_0 0x00141400 -# define H4_24XX_GPMC_CONFIG3_0 0x00141400 -# define H4_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define H4_24XX_GPMC_CONFIG5_0 0x010C1414 -# define H4_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* NOR boot */ -# define H4_24XX_GPMC_CONFIG1_0 0x3 -# define H4_24XX_GPMC_CONFIG2_0 0x00151501 -# define H4_24XX_GPMC_CONFIG3_0 0x00060602 -# define H4_24XX_GPMC_CONFIG4_0 0x10081008 -# define H4_24XX_GPMC_CONFIG5_0 0x01131F1F -# define H4_24XX_GPMC_CONFIG6_0 0x000004c4 -# endif /* endif CFG_NAND_BOOT */ -# define H4_24XX_GPMC_CONFIG7_0 (0x00000C40|(H4_CS0_BASE >> 24)) -# define H4_24XX_GPMC_CONFIG1_1 0x00011000 -# define H4_24XX_GPMC_CONFIG2_1 0x001f1f01 -# define H4_24XX_GPMC_CONFIG3_1 0x00080803 -# define H4_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define H4_24XX_GPMC_CONFIG5_1 0x041f1F1F -# define H4_24XX_GPMC_CONFIG6_1 0x000004C4 -# define H4_24XX_GPMC_CONFIG7_1 (0x00000F40|(H4_CS1_BASE >> 24)) +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001f1f01 +# define MPDB_GPMC_CONFIG3 0x00080803 +# define MPDB_GPMC_CONFIG4 0x1C091C09 +# define MPDB_GPMC_CONFIG5 0x041f1F1F +# define MPDB_GPMC_CONFIG6 0x000004C4 + +# define SIBNOR_GPMC_CONFIG1 0x3 +# define SIBNOR_GPMC_CONFIG2 0x00151501 +# define SIBNOR_GPMC_CONFIG3 0x00060602 +# define SIBNOR_GPMC_CONFIG4 0x10081008 +# define SIBNOR_GPMC_CONFIG5 0x01131F1F +# define SIBNOR_GPMC_CONFIG6 0x00000000 + +# define ONENAND_GPMC_CONFIG1 0x00001200 +# define ONENAND_GPMC_CONFIG2 0x000c0c01 +# define ONENAND_GPMC_CONFIG3 0x00030301 +# define ONENAND_GPMC_CONFIG4 0x0c040c04 +# define ONENAND_GPMC_CONFIG5 0x010C1010 +# define ONENAND_GPMC_CONFIG6 0x00000000 + +# define PCMCIA_GPMC_CONFIG1 0x01E91200 +# define PCMCIA_GPMC_CONFIG2 0x001E1E01 +# define PCMCIA_GPMC_CONFIG3 0x00020203 +# define PCMCIA_GPMC_CONFIG4 0x1D041D04 +# define PCMCIA_GPMC_CONFIG5 0x031D1F1F +# define PCMCIA_GPMC_CONFIG6 0x000004C4 #endif /* endif CFG_PRCM_III */ +#if defined (PRCM_CONFIG_I) || defined(PRCM_CONFIG_2) /* L3 at 165MHz */ +# define SMNAND_GPMC_CONFIG1 0x00001800 +# define SMNAND_GPMC_CONFIG2 0x00141400 +# define SMNAND_GPMC_CONFIG3 0x00141400 +# define SMNAND_GPMC_CONFIG4 0x0F010F01 +# define SMNAND_GPMC_CONFIG5 0x010C1414 +# define SMNAND_GPMC_CONFIG6 0x00000A80 +# define SMNAND_GPMC_CONFIG7 0x00000C44 + +# define STNOR_GPMC_CONFIG1 0x3 +# define STNOR_GPMC_CONFIG2 0x00151501 +# define STNOR_GPMC_CONFIG3 0x00060602 +# define STNOR_GPMC_CONFIG4 0x11091109 +# define STNOR_GPMC_CONFIG5 0x01141F1F +# define STNOR_GPMC_CONFIG6 0x000004c4 + +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001f1f01 +# define MPDB_GPMC_CONFIG3 0x00080803 +# define MPDB_GPMC_CONFIG4 0x1c0b1c0a +# define MPDB_GPMC_CONFIG5 0x041f1F1F +# define MPDB_GPMC_CONFIG6 0x000004C4 + +# define SIBNOR_GPMC_CONFIG1 0x3 +# define SIBNOR_GPMC_CONFIG2 0x00151501 +# define SIBNOR_GPMC_CONFIG3 0x00060602 +# define SIBNOR_GPMC_CONFIG4 0x11091109 +# define SIBNOR_GPMC_CONFIG5 0x01141F1F +# define SIBNOR_GPMC_CONFIG6 0x00000000 + +# define ONENAND_GPMC_CONFIG1 0x00001200 +# define ONENAND_GPMC_CONFIG2 0x000F0F01 +# define ONENAND_GPMC_CONFIG3 0x00030301 +# define ONENAND_GPMC_CONFIG4 0x0F040F04 +# define ONENAND_GPMC_CONFIG5 0x010F1010 +# define ONENAND_GPMC_CONFIG6 0x00000000 + +# define PCMCIA_GPMC_CONFIG1 0x01E91200 +# define PCMCIA_GPMC_CONFIG2 0x001E1E01 +# define PCMCIA_GPMC_CONFIG3 0x00020203 +# define PCMCIA_GPMC_CONFIG4 0x1D041D04 +# define PCMCIA_GPMC_CONFIG5 0x031D1F1F +# define PCMCIA_GPMC_CONFIG6 0x000004C4 + +#endif + +#if 0 +/* Board Specific Settings for each of the configurations for chips + * whose values change as per platform. - None currently + */ +#if CONFIG_OMAP24XXH4 +#include <asm/arch/mem-h4.h> +#endif + +#if CONFIG_2430SDP +#include <asm/arch/mem-sdp2430.h> +#endif + +#endif /* if 0 */ + +/* max number of GPMC Chip Selects */ +#define GPMC_MAX_CS 8 +/* max number of GPMC regs */ +#define GPMC_MAX_REG 7 + +#define PROC_NOR 1 +#define PROC_NAND 2 +#define PISMO_SIBLEY0 3 +#define PISMO_SIBLEY1 4 +#define PISMO_ONENAND 5 +#define DBG_MPDB 6 +#define PISMO_PCMCIA 7 + +/* make it readable for the gpmc_init */ +#define PROC_NOR_BASE FLASH_BASE +#define PROC_NAND_BASE NAND_BASE +#define PISMO_SIB0_BASE SIBLEY_MAP1 +#define PISMO_SIB1_BASE SIBLEY_MAP2 +#define PISMO_ONEN_BASE ONENAND_MAP +#define DBG_MPDB_BASE DEBUG_BASE +#define PISMO_PCMCIA_BASE PCMCIA_BASE + #endif /* endif _OMAP24XX_MEM_H_ */ diff --git a/include/asm-arm/arch-arm1136/mux.h b/include/asm-arm/arch-arm1136/mux.h index 67c84190867..e61f9f18f82 100644 --- a/include/asm-arm/arch-arm1136/mux.h +++ b/include/asm-arm/arch-arm1136/mux.h @@ -55,6 +55,9 @@ void muxSetupHDQ(void); #define CONTROL_PADCONF_GPMC_NCS0_BYTE3 ((volatile unsigned char *)0x4800008F) /* Pin Muxing registers used for SDRC */ +#define CONTROL_PADCONF_SDRC_STK_DM1 0xAC +#define CONTROL_PADCONF_SDRC_DQS1 0xB0 + #define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0) #define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1) #define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2) diff --git a/include/asm-arm/arch-arm1136/omap2420.h b/include/asm-arm/arch-arm1136/omap2420.h index d833035a4b3..e8638a60983 100644 --- a/include/asm-arm/arch-arm1136/omap2420.h +++ b/include/asm-arm/arch-arm1136/omap2420.h @@ -30,12 +30,7 @@ /* * 2420 specific Section */ - -/* L3 Firewall */ -#define A_REQINFOPERM0 0x68005048 -#define A_READPERM0 0x68005050 -#define A_WRITEPERM0 0x68005058 -/* #define GP_DEVICE (BIT8|BIT9) FIXME -- commented out to make compile -- FIXME */ +#define OMAP24XX_L4_IO_BASE (0x48000000) /* L3 Firewall */ #define A_REQINFOPERM0 0x68005048 @@ -43,143 +38,52 @@ #define A_WRITEPERM0 0x68005058 /* CONTROL */ -#define OMAP2420_CTRL_BASE (0x48000000) -#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8) - -/* device type */ -#define TST_DEVICE 0x0 -#define EMU_DEVICE 0x1 -#define HS_DEVICE 0x2 -#define GP_DEVICE 0x3 +#define OMAP24XX_CTRL_BASE (0x48000000) /* TAP information */ -#define OMAP2420_TAP_BASE (0x48014000) -#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204) -#define PRODUCTION_ID (OMAP2420_TAP_BASE+0x208) +#define OMAP24XX_TAP_BASE (0x48014000) /* GPMC */ -#define OMAP2420_GPMC_BASE (0x6800A000) -#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10) -#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C) -#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40) -#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50) -#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60) -#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64) -#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68) -#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C) -#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70) -#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74) -#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78) -#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90) -#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94) -#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98) -#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C) -#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0) -#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4) -#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8) +#define OMAP24XX_GPMC_BASE (0x6800A000) /* SMS */ -#define OMAP2420_SMS_BASE 0x68008000 -#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10) -#define SMS_CLASS_ARB0 (OMAP2420_SMS_BASE+0xD0) -# define BURSTCOMPLETE_GROUP7 BIT31 +#define OMAP24XX_SMS_BASE 0x68008000 /* SDRC */ -#define OMAP2420_SDRC_BASE 0x68009000 -#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10) -#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14) -#define SDRC_CS_CFG (OMAP2420_SDRC_BASE+0x40) -#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44) -#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60) -#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68) -#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70) -#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80) -#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84) -#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C) -#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0) -#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4) -#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8) -#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4) -#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8) -#define OMAP2420_SDRC_CS0 0x80000000 -#define OMAP2420_SDRC_CS1 0xA0000000 -#define CMD_NOP 0x0 -#define CMD_PRECHARGE 0x1 -#define CMD_AUTOREFRESH 0x2 -#define CMD_ENTR_PWRDOWN 0x3 -#define CMD_EXIT_PWRDOWN 0x4 -#define CMD_ENTR_SRFRSH 0x5 -#define CMD_CKE_HIGH 0x6 -#define CMD_CKE_LOW 0x7 -#define SOFTRESET BIT1 -#define SMART_IDLE (0x2 << 3) -#define REF_ON_IDLE (0x1 << 6) - +#define OMAP24XX_SDRC_BASE 0x68009000 /* UART */ -#define OMAP2420_UART1 0x4806A000 -#define OMAP2420_UART2 0x4806C000 -#define OMAP2420_UART3 0x4806E000 +#define OMAP24XX_UART1 0x4806A000 +#define OMAP24XX_UART2 0x4806C000 +#define OMAP24XX_UART3 0x4806E000 /* General Purpose Timers */ -#define OMAP2420_GPT1 0x48028000 -#define OMAP2420_GPT2 0x4802A000 -#define OMAP2420_GPT3 0x48078000 -#define OMAP2420_GPT4 0x4807A000 -#define OMAP2420_GPT5 0x4807C000 -#define OMAP2420_GPT6 0x4807E000 -#define OMAP2420_GPT7 0x48080000 -#define OMAP2420_GPT8 0x48082000 -#define OMAP2420_GPT9 0x48084000 -#define OMAP2420_GPT10 0x48086000 -#define OMAP2420_GPT11 0x48088000 -#define OMAP2420_GPT12 0x4808A000 - -/* timer regs offsets (32 bit regs) */ -#define TIDR 0x0 /* r */ -#define TIOCP_CFG 0x10 /* rw */ -#define TISTAT 0x14 /* r */ -#define TISR 0x18 /* rw */ -#define TIER 0x1C /* rw */ -#define TWER 0x20 /* rw */ -#define TCLR 0x24 /* rw */ -#define TCRR 0x28 /* rw */ -#define TLDR 0x2C /* rw */ -#define TTGR 0x30 /* rw */ -#define TWPS 0x34 /* r */ -#define TMAR 0x38 /* rw */ -#define TCAR1 0x3c /* r */ -#define TSICR 0x40 /* rw */ -#define TCAR2 0x44 /* r */ +#define OMAP24XX_GPT1 0x48028000 +#define OMAP24XX_GPT2 0x4802A000 +#define OMAP24XX_GPT3 0x48078000 +#define OMAP24XX_GPT4 0x4807A000 +#define OMAP24XX_GPT5 0x4807C000 +#define OMAP24XX_GPT6 0x4807E000 +#define OMAP24XX_GPT7 0x48080000 +#define OMAP24XX_GPT8 0x48082000 +#define OMAP24XX_GPT9 0x48084000 +#define OMAP24XX_GPT10 0x48086000 +#define OMAP24XX_GPT11 0x48088000 +#define OMAP24XX_GPT12 0x4808A000 + /* WatchDog Timers (1 secure, 3 GP) */ #define WD1_BASE 0x48020000 #define WD2_BASE 0x48022000 #define WD3_BASE 0x48024000 #define WD4_BASE 0x48026000 -#define WWPS 0x34 /* r */ -#define WSPR 0x48 /* rw */ -#define WD_UNLOCK1 0xAAAA -#define WD_UNLOCK2 0x5555 + +/* 32KTIMER */ +#define SYNC_32KTIMER 0x48004000 +#define S32K_CR (SYNC_32KTIMER+0x10) /* PRCM */ -#define OMAP2420_CM_BASE 0x48008000 -#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080) -#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140) -#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200) -#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204) -#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210) -#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214) -#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240) -#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440) -#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244) -#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340) -#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450) -#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500) -#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520) -#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540) -#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544) -#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840) +#define OMAP24XX_CM_BASE 0x48008000 /* * H4 specific Section @@ -191,17 +95,7 @@ * you want your code to live below that address, you have to * be prepared to jump though hoops, to reset the base address. */ -#if defined(CONFIG_OMAP2420H4) -/* GPMC */ -#ifdef CONFIG_VIRTIO_A /* Pre version B */ -# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x04000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ -#else -# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */ -# define H4_CS1_BASE 0x08000000 /* debug board */ -# define H4_CS2_BASE 0x0A000000 /* wifi board */ -#endif +#if defined(CONFIG_OMAP24XXH4) /* base address for indirect vectors (internal boot mode) */ #define SRAM_OFFSET0 0x40000000 @@ -214,8 +108,8 @@ #define PERIFERAL_PORT_BASE 0x480FE003 /* FPGA on Debug board.*/ -#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b) -#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c) +#define ETH_CONTROL_REG (DEBUG_BASE+0x30b) +#define LAN_RESET_REGISTER (DEBUG_BASE+0x1c) #endif /* endif CONFIG_2420H4 */ #endif diff --git a/include/asm-arm/arch-arm1136/omap2430.h b/include/asm-arm/arch-arm1136/omap2430.h new file mode 100644 index 00000000000..8a34418259d --- /dev/null +++ b/include/asm-arm/arch-arm1136/omap2430.h @@ -0,0 +1,138 @@ +/* + * (C) Copyright 2004-2005 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP2430_SYS_H_ +#define _OMAP2430_SYS_H_ + +#include <asm/arch/sizes.h> + +/* + * 2430 specific Section + */ + +/* Stuff on L3 Interconnect */ +#define SMX_APE_BASE 0x68000000 + +/* L3 Firewall */ +#define A_REQINFOPERM0 (SMX_APE_BASE + 0x05048) +#define A_READPERM0 (SMX_APE_BASE + 0x05050) +#define A_WRITEPERM0 (SMX_APE_BASE + 0x05058) + +/* GPMC */ +#define OMAP24XX_GPMC_BASE (0x6E000000) + +/* SMS */ +#define OMAP24XX_SMS_BASE 0x6C000000 + +/* SDRC */ +#define OMAP24XX_SDRC_BASE 0x6D000000 + +/* + * L4 Peripherals - L4 Wakeup and L4 Core now + */ +#define OMAP243X_CORE_L4_IO_BASE 0x48000000 + +#define OMAP243X_WAKEUP_L4_IO_BASE 0x49000000 + +#define OMAP24XX_L4_IO_BASE OMAP243X_CORE_L4_IO_BASE + +/* CONTROL */ +#define OMAP24XX_CTRL_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x2000) + +/* TAP information */ +#define OMAP24XX_TAP_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0xA000) + +/* UART */ +#define OMAP24XX_UART1 (OMAP24XX_L4_IO_BASE+0x6a000) +#define OMAP24XX_UART2 (OMAP24XX_L4_IO_BASE+0x6c000) +#define OMAP24XX_UART3 (OMAP24XX_L4_IO_BASE+0x6e000) + +/* General Purpose Timers */ +#define OMAP24XX_GPT1 (OMAP243X_WAKEUP_L4_IO_BASE+0x18000) +#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000) +#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000) +#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000) +#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000) +#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000) +#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000) +#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000) +#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000) +#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000) +#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000) +#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000) + + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x14000) +#define WD2_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x16000) +#define WD3_BASE (OMAP24XX_L4_IO_BASE+0x24000) /* not present */ +#define WD4_BASE (OMAP24XX_L4_IO_BASE+0x26000) + +/* 32KTIMER */ +#define SYNC_32KTIMER_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x20000) +#define S32K_CR (SYNC_32KTIMER_BASE+0x10) + +/* PRCM */ +#define OMAP24XX_CM_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x06000) + +/* + * SDP2430 specific Section + */ + +/* + * The 243x's chip selects are programmable. The mask ROM + * does configure CS0 to 0x08000000 before dispatch. So, if + * you want your code to live below that address, you have to + * be prepared to jump though hoops, to reset the base address. + * Same as in SDP2430 + */ +#if (CONFIG_2430SDP) + +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) + +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC + +#define PERIFERAL_PORT_BASE 0x480FE003 + +/* FPGA on Debug board.*/ +#define ETH_CONTROL_REG (DEBUG_BASE+0x30b) +#define LAN_RESET_REGISTER (DEBUG_BASE+0x1c) +#define DIP_SWITCH_INPUT_REG2 (DEBUG_BASE+0x60) +#define LED_REGISTER (DEBUG_BASE+0x40) +#define FPGA_REV_REGISTER (DEBUG_BASE+0x10) +#define EEPROM_MAIN_BRD (DEBUG_BASE+0x10000+0x1800) +#define EEPROM_CONN_BRD (DEBUG_BASE+0x10000+0x1900) +#define EEPROM_UI_BRD (DEBUG_BASE+0x10000+0x1A00) +#define EEPROM_MCAM_BRD (DEBUG_BASE+0x10000+0x1B00) +#define I2C2_MEMORY_STATUS_REG (DEBUG_BASE+0x10000+0xA) +#define ENHANCED_UI_EE_NAME "750-2038" +#define GDP_MB_EE_NAME "750-2031-3" + +#endif /* endif (CONFIG_2430SDP) */ + +#endif diff --git a/include/asm-arm/arch-arm1136/rev.h b/include/asm-arm/arch-arm1136/rev.h new file mode 100644 index 00000000000..9aedbc53378 --- /dev/null +++ b/include/asm-arm/arch-arm1136/rev.h @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP24XX_REV_H_ +#define _OMAP24XX_REV_H_ + +typedef struct h4_system_data { + /* base board info */ + u32 base_b_rev; /* rev from base board i2c */ + /* cpu board info */ + u32 cpu_b_rev; /* rev from cpu board i2c */ + u32 cpu_b_mux; /* mux type on daughter board */ + u32 cpu_b_ddr_type; /* mem type */ + u32 cpu_b_ddr_speed; /* ddr speed rating */ + u32 cpu_b_switches; /* boot ctrl switch settings */ + /* cpu info */ + u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/ + u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/ +} h4_sys_data; + +#define CDB_DDR_COMBO /* combo part on cpu daughter card */ +#define CDB_DDR_IPDB /* 2x16 parts on daughter card */ + +#define DDR_100 100 /* type found on most mem d-boards */ +#define DDR_111 111 /* some combo parts */ +#define DDR_133 133 /* most combo, some mem d-boards */ +#define DDR_165 165 /* future parts */ + +#define CPU_2420 0x2420 +#define CPU_2422 0x2422 +#define CPU_2430 0x2430 + +#define CPU_2422_ES1 1 +#define CPU_2422_ES2 2 +#define CPU_2420_ES1 1 +#define CPU_2420_ES2 2 + +#endif diff --git a/include/asm-arm/arch-arm1136/sys_info.h b/include/asm-arm/arch-arm1136/sys_info.h index 53c231a5e46..e5a51acd9d3 100644 --- a/include/asm-arm/arch-arm1136/sys_info.h +++ b/include/asm-arm/arch-arm1136/sys_info.h @@ -53,30 +53,89 @@ typedef struct h4_system_data { #define CPU_2420 0x2420 #define CPU_2422 0x2422 /* 2420 + 64M stacked */ #define CPU_2423 0x2423 /* 2420 + 96M stacked */ +#define CPU_2430 0x2430 +/* 242x real hardware: + * ES1 = rev 0 + * ES2 = rev 1 + * ES2.05 = rev 2 + * ES2.1 = rev 3 + * ES2.1.1 = rev 4 + * ES2.2 = rev 5 + */ + +/* 242x code defines: + * ES1 = 0+1 = 1 + * ES2 = 1+1 = 2 + * ES2.05 = 2+1 = 3 + * ES2.1 = 3+1 = 4 + * ES2.1.1 = 4+1 = 5 + * ES2.2 = 5+1 = 6 + */ #define CPU_2422_ES1 1 #define CPU_2422_ES2 2 +#define CPU_2422_ES2_05 3 +#define CPU_2422_ES2_1 4 +#define CPU_2422_ES2_1_1 5 +#define CPU_2422_ES2_2 6 + #define CPU_2420_ES1 1 #define CPU_2420_ES2 2 -#define CPU_2420_2422_ES1 1 +#define CPU_2420_ES2_05 3 +#define CPU_2420_ES2_1 4 +#define CPU_2420_ES2_1_1 5 +#define CPU_2420_ES2_2 6 + +#define CPU_242X_ES1 1 +#define CPU_242X_ES2 2 +#define CPU_242X_ES2_05 3 +#define CPU_242X_ES2_1 4 +#define CPU_242X_ES2_1_1 5 +#define CPU_242X_ES2_2 6 + +/* 243x real hardware: + * ES1 = rev 0 + * ES2 = rev 1 + * + * 243x code defines: + * ES1 = 0+1 = 1 + * ES2 = 1+1 = 2 + * ES2.1.0 = 2+1 = 3 + */ +#define CPU_2430_ES1 1 +#define CPU_2430_ES2 2 +#define CPU_2430_ES2_1_0 3 #define CPU_2420_CHIPID 0x0B5D9000 +#define CPU_2430_CHIPID 0x0B68A000 #define CPU_24XX_ID_MASK 0x0FFFF000 #define CPU_242X_REV_MASK 0xF0000000 #define CPU_242X_PID_MASK 0x000F0000 -#define BOARD_H4_MENELAUS 1 -#define BOARD_H4_SDP 2 +#define BOARD_H4_MENELAUS 1 +#define BOARD_H4_SDP 2 +#define BOARD_H4_MENELAUS_HRP 3 +#define BOARD_SDP_2430_M1 4 /* pre-T2 platform */ +#define BOARD_SDP_2430_T2 5 /* Triton2 companion chip */ +#define BOARD_GDP_2430_T2 6 /* 2430 GDP Variant */ + +/* Various SDP Variants */ +#define BOARD_SDP_2430_0_1 0x01 +#define BOARD_SDP_2430_1_0 0x10 +#define BOARD_SDP_2430_1_1 0x11 +#define BOARD_SDP_2430_2_1 0x20 #define GPMC_MUXED 1 #define GPMC_NONMUXED 0 #define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ #define TYPE_NOR 0x000 +#define TYPE_ONENAND 0x800 #define WIDTH_8BIT 0x0000 #define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ #define I2C_MENELAUS 0x72 /* i2c id for companion chip */ +#define I2C_TRITON2 0x4B /* addres of power group */ #endif diff --git a/include/asm-arm/arch-arm720t/s3c4510b.h b/include/asm-arm/arch-arm720t/s3c4510b.h index 517b1ada99b..73a3b6d856b 100644 --- a/include/asm-arm/arch-arm720t/s3c4510b.h +++ b/include/asm-arm/arch-arm720t/s3c4510b.h @@ -267,8 +267,6 @@ struct _irq_handler { void (*m_func)( void *data); }; -extern struct _irq_handler IRQ_HANDLER[]; - #endif #endif /* __S3C4510_h */ diff --git a/include/asm-arm/arch-ixp/ixp425.h b/include/asm-arm/arch-ixp/ixp425.h index fbe68586b3c..11dc356a928 100644 --- a/include/asm-arm/arch-ixp/ixp425.h +++ b/include/asm-arm/arch-ixp/ixp425.h @@ -73,21 +73,18 @@ * PCI Configuration space */ #define IXP425_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP425_PCI_CFG_BASE_VIRT (0xFFFD0000) #define IXP425_PCI_CFG_REGION_SIZE (0x00001000) /* * Expansion BUS Configuration registers */ #define IXP425_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP425_EXP_CFG_BASE_VIRT (0xFFFD1000) #define IXP425_EXP_CFG_REGION_SIZE (0x00001000) /* * Peripheral space */ #define IXP425_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP425_PERIPHERAL_BASE_VIRT (0xFFFD2000) #define IXP425_PERIPHERAL_REGION_SIZE (0x0000C000) /* @@ -99,7 +96,6 @@ * Q Manager space .. not static mapped */ #define IXP425_QMGR_BASE_PHYS (0x60000000) -#define IXP425_QMGR_BASE_VIRT (0xFFFDE000) #define IXP425_QMGR_REGION_SIZE (0x00004000) /* @@ -113,10 +109,8 @@ */ #define IXP425_EXP_BUS_BASE1_PHYS (0x00000000) #define IXP425_EXP_BUS_BASE2_PHYS (0x50000000) -#define IXP425_EXP_BUS_BASE2_VIRT (0xF0000000) #define IXP425_EXP_BUS_BASE_PHYS IXP425_EXP_BUS_BASE2_PHYS -#define IXP425_EXP_BUS_BASE_VIRT IXP425_EXP_BUS_BASE2_VIRT #define IXP425_EXP_BUS_REGION_SIZE (0x08000000) #define IXP425_EXP_BUS_CSX_REGION_SIZE (0x01000000) @@ -130,20 +124,10 @@ #define IXP425_EXP_BUS_CS6_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x06000000) #define IXP425_EXP_BUS_CS7_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x07000000) -#define IXP425_EXP_BUS_CS0_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x00000000) -#define IXP425_EXP_BUS_CS1_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x01000000) -#define IXP425_EXP_BUS_CS2_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x02000000) -#define IXP425_EXP_BUS_CS3_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x03000000) -#define IXP425_EXP_BUS_CS4_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x04000000) -#define IXP425_EXP_BUS_CS5_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x05000000) -#define IXP425_EXP_BUS_CS6_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x06000000) -#define IXP425_EXP_BUS_CS7_BASE_VIRT (IXP425_EXP_BUS_BASE2_VIRT + 0x07000000) - #define IXP425_FLASH_WRITABLE (0x2) #define IXP425_FLASH_DEFAULT (0xbcd23c40) #define IXP425_FLASH_WRITE (0xbcd23c42) - #define IXP425_EXP_CS0_OFFSET 0x00 #define IXP425_EXP_CS1_OFFSET 0x04 #define IXP425_EXP_CS2_OFFSET 0x08 @@ -161,7 +145,7 @@ * Expansion Bus Controller registers. */ #ifndef __ASSEMBLY__ -#define IXP425_EXP_REG(x) ((volatile u32 *)(IXP425_EXP_CFG_BASE_VIRT+(x))) +#define IXP425_EXP_REG(x) ((volatile u32 *)(IXP425_EXP_CFG_BASE_PHYS+(x))) #else #define IXP425_EXP_REG(x) (IXP425_EXP_CFG_BASE_PHYS+(x)) #endif @@ -288,7 +272,6 @@ #define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ #define MSR_DCTS (1 << 0) /* Delta Clear To Send */ -#define IXP425_CONSOLE_UART_BASE_VIRT IXP425_UART1_BASE_VIRT #define IXP425_CONSOLE_UART_BASE_PHYS IXP425_UART1_BASE_PHYS /* * Peripheral Space Registers @@ -306,20 +289,6 @@ #define IXP425_EthB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xA000) #define IXP425_USB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xB000) -#define IXP425_UART1_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x0000) -#define IXP425_UART2_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x1000) -#define IXP425_PMU_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x2000) -#define IXP425_INTC_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x3000) -#define IXP425_GPIO_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x4000) -#define IXP425_TIMER_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x5000) -#define IXP425_NPEA_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x6000) -#define IXP425_NPEB_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x7000) -#define IXP425_NPEC_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x8000) -#define IXP425_EthA_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0x9000) -#define IXP425_EthB_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0xA000) -#define IXP425_USB_BASE_VIRT (IXP425_PERIPHERAL_BASE_VIRT + 0xB000) - - /* * UART Register Definitions , Offsets only as there are 2 UARTS. * IXP425_UART1_BASE , IXP425_UART2_BASE. @@ -341,11 +310,14 @@ #define IXP425_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */ #define IXP425_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */ +#define N_IRQS 32 +#define IXP425_TIMER_2_IRQ 11 + /* * Interrupt Controller Register Definitions. */ #ifndef __ASSEMBLY__ -#define IXP425_INTC_REG(x) ((volatile u32 *)(IXP425_INTC_BASE_VIRT+(x))) +#define IXP425_INTC_REG(x) ((volatile u32 *)(IXP425_INTC_BASE_PHYS+(x))) #else #define IXP425_INTC_REG(x) (IXP425_INTC_BASE_PHYS+(x)) #endif @@ -375,7 +347,7 @@ * GPIO Register Definitions. * [Only perform 32bit reads/writes] */ -#define IXP425_GPIO_REG(x) ((volatile u32 *)(IXP425_GPIO_BASE_VIRT+(x))) +#define IXP425_GPIO_REG(x) ((volatile u32 *)(IXP425_GPIO_BASE_PHYS+(x))) #define IXP425_GPIO_GPOUTR IXP425_GPIO_REG(IXP425_GPIO_GPOUTR_OFFSET) #define IXP425_GPIO_GPOER IXP425_GPIO_REG(IXP425_GPIO_GPOER_OFFSET) @@ -387,6 +359,16 @@ #define IXP425_GPIO_GPDBSELR IXP425_GPIO_REG(IXP425_GPIO_GPDBSELR_OFFSET) /* + * Macros to make it easy to access the GPIO registers + */ +#define GPIO_OUTPUT_ENABLE(line) *IXP425_GPIO_GPOER &= ~(1 << (line)) +#define GPIO_OUTPUT_DISABLE(line) *IXP425_GPIO_GPOER |= (1 << (line)) +#define GPIO_OUTPUT_SET(line) *IXP425_GPIO_GPOUTR |= (1 << (line)) +#define GPIO_OUTPUT_CLEAR(line) *IXP425_GPIO_GPOUTR &= ~(1 << (line)) +#define GPIO_INT_ACT_LOW_SET(line) *IXP425_GPIO_GPIT1R = \ + (*IXP425_GPIO_GPIT1R & ~(0x7 << (line * 3))) | (0x1 << (line * 3)) + +/* * Constants to make it easy to access Timer Control/Status registers */ #define IXP425_OSTS_OFFSET 0x00 /* Continious TimeStamp */ @@ -409,7 +391,9 @@ #define IXP425_TIMER_REG(x) (IXP425_TIMER_BASE_PHYS+(x)) #endif +#if 0 /* test-only: also defined in npe/include/... */ #define IXP425_OSTS IXP425_TIMER_REG(IXP425_OSTS_OFFSET) +#endif #define IXP425_OST1 IXP425_TIMER_REG(IXP425_OST1_OFFSET) #define IXP425_OSRT1 IXP425_TIMER_REG(IXP425_OSRT1_OFFSET) #define IXP425_OST2 IXP425_TIMER_REG(IXP425_OST2_OFFSET) @@ -457,12 +441,12 @@ #define PCI_ATPDMA0_LENADDR_OFFSET 0x48 #define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C #define PCI_ATPDMA1_PCIADDR_OFFSET 0x50 -#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 +#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 /* * PCI Control/Status Registers */ -#define IXP425_PCI_CSR(x) ((volatile u32 *)(IXP425_PCI_CFG_BASE_VIRT+(x))) +#define IXP425_PCI_CSR(x) ((volatile u32 *)(IXP425_PCI_CFG_BASE_PHYS+(x))) #define PCI_NP_AD IXP425_PCI_CSR(PCI_NP_AD_OFFSET) #define PCI_NP_CBE IXP425_PCI_CSR(PCI_NP_CBE_OFFSET) diff --git a/include/asm-arm/arch-omap/sizes.h b/include/asm-arm/arch-omap/sizes.h new file mode 100644 index 00000000000..f8d92ca1204 --- /dev/null +++ b/include/asm-arm/arch-omap/sizes.h @@ -0,0 +1,52 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* DO NOT EDIT!! - this file automatically generated + * from .s file by awk -f s2h.awk + */ +/* Size defintions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif + +/* END */ diff --git a/include/asm-arm/arch-omap3/bits.h b/include/asm-arm/arch-omap3/bits.h new file mode 100644 index 00000000000..8522335bfc3 --- /dev/null +++ b/include/asm-arm/arch-omap3/bits.h @@ -0,0 +1,48 @@ +/* bits.h + * Copyright (c) 2004 Texas Instruments + * + * This package is free software; you can redistribute it and/or + * modify it under the terms of the license found in the file + * named COPYING that should have accompanied this file. + * + * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED + * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. + */ +#ifndef __bits_h +#define __bits_h 1 + +#define BIT0 (1<<0) +#define BIT1 (1<<1) +#define BIT2 (1<<2) +#define BIT3 (1<<3) +#define BIT4 (1<<4) +#define BIT5 (1<<5) +#define BIT6 (1<<6) +#define BIT7 (1<<7) +#define BIT8 (1<<8) +#define BIT9 (1<<9) +#define BIT10 (1<<10) +#define BIT11 (1<<11) +#define BIT12 (1<<12) +#define BIT13 (1<<13) +#define BIT14 (1<<14) +#define BIT15 (1<<15) +#define BIT16 (1<<16) +#define BIT17 (1<<17) +#define BIT18 (1<<18) +#define BIT19 (1<<19) +#define BIT20 (1<<20) +#define BIT21 (1<<21) +#define BIT22 (1<<22) +#define BIT23 (1<<23) +#define BIT24 (1<<24) +#define BIT25 (1<<25) +#define BIT26 (1<<26) +#define BIT27 (1<<27) +#define BIT28 (1<<28) +#define BIT29 (1<<29) +#define BIT30 (1<<30) +#define BIT31 (1<<31) + +#endif diff --git a/include/asm-arm/arch-omap3/clocks.h b/include/asm-arm/arch-omap3/clocks.h new file mode 100644 index 00000000000..a942e69ab9d --- /dev/null +++ b/include/asm-arm/arch-omap3/clocks.h @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP34XX_CLOCKS_H_ +#define _OMAP34XX_CLOCKS_H_ + +#define LDELAY 12000000 + +#define S12M 12000000 +#define S13M 13000000 +#define S19_2M 19200000 +#define S24M 24000000 +#define S26M 26000000 +#define S38_4M 38400000 + +#include <asm/arch/clocks343x.h> + +#endif diff --git a/include/asm-arm/arch-omap3/clocks343x.h b/include/asm-arm/arch-omap3/clocks343x.h new file mode 100644 index 00000000000..fbc59a8ddb2 --- /dev/null +++ b/include/asm-arm/arch-omap3/clocks343x.h @@ -0,0 +1,155 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP343X_CLOCKS_H_ +#define _OMAP343X_CLOCKS_H_ + +#define PLL_STOP 1 /* PER & IVA */ +#define PLL_LOW_POWER_BYPASS 5 /* MPU, IVA & CORE */ +#define PLL_FAST_RELOCK_BYPASS 6 /* CORE */ +#define PLL_LOCK 7 /* MPU, IVA, CORE & PER */ + +/* The following configurations are OPP and SysClk value independant + * and hence are defined here. All the other DPLL related values are + * tabulated in lowlevel_init.S. + */ + +/* CORE DPLL */ +# define CORE_M3X2 2 /* 332MHz : CM_CLKSEL1_EMU */ +# define CORE_SSI_DIV 3 /* 221MHz : CM_CLKSEL_CORE */ +# define CORE_FUSB_DIV 2 /* 41.5MHz: */ +# define CORE_L4_DIV 2 /* 83MHz : L4 */ +# define CORE_L3_DIV 2 /* 166MHz : L3 {DDR} */ +# define GFX_DIV 2 /* 83MHz : CM_CLKSEL_GFX */ +# define WKUP_RSM 2 /* 41.5MHz: CM_CLKSEL_WKUP */ + +/* PER DPLL */ +# define PER_M6X2 3 /* 288MHz: CM_CLKSEL1_EMU */ +# define PER_M5X2 4 /* 216MHz: CM_CLKSEL_CAM */ +# define PER_M4X2 9 /* 96MHz : CM_CLKSEL_DSS-dss1 */ +# define PER_M3X2 16 /* 54MHz : CM_CLKSEL_DSS-tv */ + +# define CLSEL1_EMU_VAL ((CORE_M3X2 << 16) | (PER_M6X2 << 24) | (0x0a50)) + +#ifdef PRCM_CLK_CFG2_332MHZ +# define M_12 0xA6 +# define N_12 0x05 +# define FSEL_12 0x07 +# define M2_12 0x01 /* M3 of 2 */ + +# define M_12_ES1 0x19F +# define M_12_ES1 0x0E +# define FSL_12_ES1 0x03 +# define M2_12_ES1 0x1 /* M3 of 2 */ + +# define M_13 0x14C +# define N_13 0x0C +# define FSEL_13 0x03 +# define M2_13 0x01 /* M3 of 2 */ + +# define M_13_ES1 0x1B2 +# define N_13_ES1 0x10 +# define FSL_13_ES1 0x03 +# define M2_13_ES1 0x01 /* M3 of 2 */ + +# define M_19p2 0x19F +# define N_19p2 0x17 +# define FSEL_19p2 0x03 +# define M2_19p2 0x01 /* M3 of 2 */ + +# define M_19p2_ES1 0x19F +# define N_19p2_ES1 0x17 +# define FSL_19p2_ES1 0x03 +# define M2_19p2_ES1 0x01 /* M3 of 2 */ + +# define M_26 0xA6 +# define N_26 0x0C +# define FSEL_26 0x07 +# define M2_26 0x01 /* M3 of 2 */ + +# define M_26_ES1 0x1B2 +# define N_26_ES1 0x21 +# define FSL_26_ES1 0x03 +# define M2_26_ES1 0x01 /* M3 of 2 */ + +# define M_38p4 0x19F +# define N_38p4 0x2F +# define FSEL_38p4 0x03 +# define M2_38p4 0x01 /* M3 of 2 */ + +# define M_38p4_ES1 0x19F +# define N_38p4_ES1 0x2F +# define FSL_38p4_ES1 0x03 +# define M2_38p4_ES1 0x01 /* M3 of 2 */ + +#elif defined(PRCM_CLK_CFG2_266MHZ) +# define M_12 0x85 +# define N_12 0x05 +# define FSEL_12 0x07 +# define M2_12 0x02 /* M3 of 2 */ + +# define M_12_ES1 0x85 /* 0x10A */ +# define N_12_ES1 0x05 /* 0x05 */ +# define FSL_12_ES1 0x07 /* 0x7 */ +# define M2_12_ES1 0x2 /* 0x2 with an M3 of 4*/ + +# define M_13 0x10A +# define N_13 0x0C +# define FSEL_13 0x3 +# define M2_13 0x1 /* M3 of 2 */ + +# define M_13_ES1 0x10A /* 0x214 */ +# define N_13_ES1 0x0C /* 0xC */ +# define FSL_13_ES1 0x3 /* 0x3 */ +# define M2_13_ES1 0x1 /* 0x2 with an M3 of 4*/ + +# define M_19p2 0x115 +# define N_19p2 0x13 +# define FSEL_19p2 0x03 +# define M2_19p2 0x01 /* M3 of 2 */ + +# define M_19p2_ES1 0x115 /* 0x299 */ +# define N_19p2_ES1 0x13 /* 0x17 */ +# define FSL_19p2_ES1 0x03 /* 0x03 */ +# define M2_19p2_ES1 0x01 /* 0x2 with M3 of 4 */ + +# define M_26 0x85 +# define N_26 0x0C +# define FSEL_26 0x07 +# define M2_26 0x01 /* M3 of 2 */ + +# define M_26_ES1 0x85 /* 0x10A */ +# define N_26_ES1 0x0C /* 0xC */ +# define FSL_26_ES1 0x07 /* 0x7 */ +# define M2_26_ES1 0x01 /* 0x2 with an M3 of 4 */ + +# define M_38p4 0x11C +# define N_38p4 0x28 +# define FSEL_38p4 0x03 +# define M2_38p4 0x01 /* M3 of 2 */ + +# define M_38p4_ES1 0x11C /* 0x299 */ +# define N_38p4_ES1 0x28 /* 0x2f */ +# define FSL_38p4_ES1 0x03 /* 0x3 */ +# define M2_38p4_ES1 0x01 /* 0x2 with an M3 of 4*/ + +#endif + +#endif /* endif _OMAP343X_CLOCKS_H_ */ diff --git a/include/asm-arm/arch-omap3/cpu.h b/include/asm-arm/arch-omap3/cpu.h new file mode 100644 index 00000000000..28a29c0afe0 --- /dev/null +++ b/include/asm-arm/arch-omap3/cpu.h @@ -0,0 +1,247 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef _OMAP34XX_CPU_H +#define _OMAP34XX_CPU_H +#include <asm/arch/omap3430.h> + +/* Register offsets of common modules */ +/* Control */ +#define CONTROL_STATUS (OMAP34XX_CTRL_BASE + 0x2F0) +#define OMAP34XX_MCR (OMAP34XX_CTRL_BASE + 0x8C) +#define CONTROL_SCALABLE_OMAP_STATUS (OMAP34XX_CTRL_BASE + 0x44C) +#define CONTROL_SCALABLE_OMAP_OCP (OMAP34XX_CTRL_BASE + 0x534) + + +/* Tap Information */ +#define TAP_IDCODE_REG (OMAP34XX_TAP_BASE+0x204) +#define PRODUCTION_ID (OMAP34XX_TAP_BASE+0x208) + +/* device type */ +#define DEVICE_MASK (BIT8|BIT9|BIT10) +#define TST_DEVICE 0x0 +#define EMU_DEVICE 0x1 +#define HS_DEVICE 0x2 +#define GP_DEVICE 0x3 + +/* GPMC CS3/cs4/cs6 not avaliable */ +#define GPMC_BASE (OMAP34XX_GPMC_BASE) +#define GPMC_SYSCONFIG (OMAP34XX_GPMC_BASE+0x10) +#define GPMC_IRQSTATUS (OMAP34XX_GPMC_BASE+0x18) +#define GPMC_IRQENABLE (OMAP34XX_GPMC_BASE+0x1C) +#define GPMC_TIMEOUT_CONTROL (OMAP34XX_GPMC_BASE+0x40) +#define GPMC_CONFIG (OMAP34XX_GPMC_BASE+0x50) +#define GPMC_STATUS (OMAP34XX_GPMC_BASE+0x54) + +#define GPMC_CONFIG_CS0 (OMAP34XX_GPMC_BASE+0x60) +#define GPMC_CONFIG_WIDTH (0x30) + +#define GPMC_CONFIG1 (0x00) +#define GPMC_CONFIG2 (0x04) +#define GPMC_CONFIG3 (0x08) +#define GPMC_CONFIG4 (0x0C) +#define GPMC_CONFIG5 (0x10) +#define GPMC_CONFIG6 (0x14) +#define GPMC_CONFIG7 (0x18) +#define GPMC_NAND_CMD (0x1C) +#define GPMC_NAND_ADR (0x20) +#define GPMC_NAND_DAT (0x24) + +#define GPMC_ECC_CONFIG (0x1F4) +#define GPMC_ECC_CONTROL (0x1F8) +#define GPMC_ECC_SIZE_CONFIG (0x1FC) +#define GPMC_ECC1_RESULT (0x200) +#define GPMC_ECC2_RESULT (0x204) +#define GPMC_ECC3_RESULT (0x208) +#define GPMC_ECC4_RESULT (0x20C) +#define GPMC_ECC5_RESULT (0x210) +#define GPMC_ECC6_RESULT (0x214) +#define GPMC_ECC7_RESULT (0x218) +#define GPMC_ECC8_RESULT (0x21C) +#define GPMC_ECC9_RESULT (0x220) + + +/* GPMC Mapping */ +# define FLASH_BASE 0x10000000 /* NOR flash (aligned to 256 Meg) */ +# define FLASH_BASE_SDPV1 0x04000000 /* NOR flash (aligned to 64 Meg) */ +# define FLASH_BASE_SDPV2 0x10000000 /* NOR flash (aligned to 256 Meg) */ +# define DEBUG_BASE 0x08000000 /* debug board */ +# define NAND_BASE 0x30000000 /* NAND addr (actual size small port)*/ +# define PISMO2_BASE 0x18000000 /* PISMO2 CS1/2 */ +# define ONENAND_MAP 0x20000000 /* OneNand addr (actual size small port */ + +/* SMS */ +#define SMS_SYSCONFIG (OMAP34XX_SMS_BASE+0x10) +#define SMS_RG_ATT0 (OMAP34XX_SMS_BASE+0x48) +#define SMS_CLASS_ARB0 (OMAP34XX_SMS_BASE+0xD0) +#define BURSTCOMPLETE_GROUP7 BIT31 + +/* SDRC */ +#define SDRC_SYSCONFIG (OMAP34XX_SDRC_BASE+0x10) +#define SDRC_STATUS (OMAP34XX_SDRC_BASE+0x14) +#define SDRC_CS_CFG (OMAP34XX_SDRC_BASE+0x40) +#define SDRC_SHARING (OMAP34XX_SDRC_BASE+0x44) +#define SDRC_DLLA_CTRL (OMAP34XX_SDRC_BASE+0x60) +#define SDRC_DLLA_STATUS (OMAP34XX_SDRC_BASE+0x64) +#define SDRC_DLLB_CTRL (OMAP34XX_SDRC_BASE+0x68) +#define SDRC_DLLB_STATUS (OMAP34XX_SDRC_BASE+0x6C) +#define DLLPHASE BIT1 +#define LOADDLL BIT2 +#define DLL_DELAY_MASK 0xFF00 +#define DLL_NO_FILTER_MASK (BIT8|BIT9) + +#define SDRC_POWER (OMAP34XX_SDRC_BASE+0x70) +#define WAKEUPPROC BIT26 + +#define SDRC_MCFG_0 (OMAP34XX_SDRC_BASE+0x80) +#define SDRC_MR_0 (OMAP34XX_SDRC_BASE+0x84) +#define SDRC_ACTIM_CTRLA_0 (OMAP34XX_SDRC_BASE+0x9C) +#define SDRC_ACTIM_CTRLB_0 (OMAP34XX_SDRC_BASE+0xA0) +#define SDRC_ACTIM_CTRLA_1 (OMAP34XX_SDRC_BASE+0xC4) +#define SDRC_ACTIM_CTRLB_1 (OMAP34XX_SDRC_BASE+0xC8) +#define SDRC_RFR_CTRL (OMAP34XX_SDRC_BASE+0xA4) +#define SDRC_RFR_CTRL (OMAP34XX_SDRC_BASE+0xA4) +#define SDRC_MANUAL_0 (OMAP34XX_SDRC_BASE+0xA8) +#define OMAP34XX_SDRC_CS0 0x80000000 +#define OMAP34XX_SDRC_CS1 0xA0000000 +#define CMD_NOP 0x0 +#define CMD_PRECHARGE 0x1 +#define CMD_AUTOREFRESH 0x2 +#define CMD_ENTR_PWRDOWN 0x3 +#define CMD_EXIT_PWRDOWN 0x4 +#define CMD_ENTR_SRFRSH 0x5 +#define CMD_CKE_HIGH 0x6 +#define CMD_CKE_LOW 0x7 +#define SOFTRESET BIT1 +#define SMART_IDLE (0x2 << 3) +#define REF_ON_IDLE (0x1 << 6) + +/* timer regs offsets (32 bit regs) */ +#define TIDR 0x0 /* r */ +#define TIOCP_CFG 0x10 /* rw */ +#define TISTAT 0x14 /* r */ +#define TISR 0x18 /* rw */ +#define TIER 0x1C /* rw */ +#define TWER 0x20 /* rw */ +#define TCLR 0x24 /* rw */ +#define TCRR 0x28 /* rw */ +#define TLDR 0x2C /* rw */ +#define TTGR 0x30 /* rw */ +#define TWPS 0x34 /* r */ +#define TMAR 0x38 /* rw */ +#define TCAR1 0x3c /* r */ +#define TSICR 0x40 /* rw */ +#define TCAR2 0x44 /* r */ +#define GPT_EN ((0<<2)|BIT1|BIT0) /* enable sys_clk NO-prescale /1 */ + +/* Watchdog */ +#define WWPS 0x34 /* r */ +#define WSPR 0x48 /* rw */ +#define WD_UNLOCK1 0xAAAA +#define WD_UNLOCK2 0x5555 + +/* PRCM */ +#define CM_FCLKEN_IVA2 0x48004000 +#define CM_CLKEN_PLL_IVA2 0x48004004 +#define CM_IDLEST_PLL_IVA2 0x48004024 +#define CM_CLKSEL1_PLL_IVA2 0x48004040 +#define CM_CLKSEL2_PLL_IVA2 0x48004044 +#define CM_CLKEN_PLL_MPU 0x48004904 +#define CM_IDLEST_PLL_MPU 0x48004924 +#define CM_CLKSEL1_PLL_MPU 0x48004940 +#define CM_CLKSEL2_PLL_MPU 0x48004944 +#define CM_FCLKEN1_CORE 0x48004a00 +#define CM_ICLKEN1_CORE 0x48004a10 +#define CM_ICLKEN2_CORE 0x48004a14 +#define CM_CLKSEL_CORE 0x48004a40 +#define CM_FCLKEN_GFX 0x48004b00 +#define CM_ICLKEN_GFX 0x48004b10 +#define CM_CLKSEL_GFX 0x48004b40 +#define CM_FCLKEN_WKUP 0x48004c00 +#define CM_ICLKEN_WKUP 0x48004c10 +#define CM_CLKSEL_WKUP 0x48004c40 +#define CM_IDLEST_WKUP 0x48004c20 +#define CM_CLKEN_PLL 0x48004d00 +#define CM_IDLEST_CKGEN 0x48004d20 +#define CM_CLKSEL1_PLL 0x48004d40 +#define CM_CLKSEL2_PLL 0x48004d44 +#define CM_CLKSEL3_PLL 0x48004d48 +#define CM_FCLKEN_DSS 0x48004e00 +#define CM_ICLKEN_DSS 0x48004e10 +#define CM_CLKSEL_DSS 0x48004e40 +#define CM_FCLKEN_CAM 0x48004f00 +#define CM_ICLKEN_CAM 0x48004f10 +#define CM_CLKSEL_CAM 0x48004F40 +#define CM_FCLKEN_PER 0x48005000 +#define CM_ICLKEN_PER 0x48005010 +#define CM_CLKSEL_PER 0x48005040 +#define CM_CLKSEL1_EMU 0x48005140 + +#define PRM_CLKSEL 0x48306d40 +#define PRM_RSTCTRL 0x48307250 +#define PRM_CLKSRC_CTRL 0x48307270 + +/* SMX-APE */ +#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000) +#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400) +#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800) +#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00) +#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000) + +#define RT_REQ_INFO_PERMISSION_1 (PM_RT_APE_BASE_ADDR_ARM + 0x68) +#define RT_READ_PERMISSION_0 (PM_RT_APE_BASE_ADDR_ARM + 0x50) +#define RT_WRITE_PERMISSION_0 (PM_RT_APE_BASE_ADDR_ARM + 0x58) +#define RT_ADDR_MATCH_1 (PM_RT_APE_BASE_ADDR_ARM + 0x60) + +#define GPMC_REQ_INFO_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x48) +#define GPMC_READ_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x50) +#define GPMC_WRITE_PERMISSION_0 (PM_GPMC_BASE_ADDR_ARM + 0x58) + +#define OCM_REQ_INFO_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x48) +#define OCM_READ_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x50) +#define OCM_WRITE_PERMISSION_0 (PM_OCM_RAM_BASE_ADDR_ARM + 0x58) +#define OCM_ADDR_MATCH_2 (PM_OCM_RAM_BASE_ADDR_ARM + 0x80) + +#define IVA2_REQ_INFO_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x48) +#define IVA2_READ_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x50) +#define IVA2_WRITE_PERMISSION_0 (PM_IVA2_BASE_ADDR_ARM + 0x58) + +#define IVA2_REQ_INFO_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x68) +#define IVA2_READ_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x70) +#define IVA2_WRITE_PERMISSION_1 (PM_IVA2_BASE_ADDR_ARM + 0x78) + +#define IVA2_REQ_INFO_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x88) +#define IVA2_READ_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x90) +#define IVA2_WRITE_PERMISSION_2 (PM_IVA2_BASE_ADDR_ARM + 0x98) + +#define IVA2_REQ_INFO_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xA8) +#define IVA2_READ_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xB0) +#define IVA2_WRITE_PERMISSION_3 (PM_IVA2_BASE_ADDR_ARM + 0xB8) + +/* I2C base */ +#define I2C_BASE1 (OMAP34XX_CORE_L4_IO_BASE + 0x70000) +#define I2C_BASE2 (OMAP34XX_CORE_L4_IO_BASE + 0x72000) +#define I2C_BASE3 (OMAP34XX_CORE_L4_IO_BASE + 0x60000) + +#endif diff --git a/include/asm-arm/arch-omap3/i2c.h b/include/asm-arm/arch-omap3/i2c.h new file mode 100644 index 00000000000..afcda5eb68d --- /dev/null +++ b/include/asm-arm/arch-omap3/i2c.h @@ -0,0 +1,131 @@ +/* + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP34XX_I2C_H_ +#define _OMAP34XX_I2C_H_ + +/* Get the i2c base addresses */ +#include <asm/arch/cpu.h> + +#define I2C_DEFAULT_BASE I2C_BASE1 + +#define I2C_REV (0x00) +#define I2C_IE (0x04) +#define I2C_STAT (0x08) +#define I2C_IV (0x0c) +#define I2C_BUF (0x14) +#define I2C_CNT (0x18) +#define I2C_DATA (0x1c) +#define I2C_SYSC (0x20) +#define I2C_CON (0x24) +#define I2C_OA (0x28) +#define I2C_SA (0x2c) +#define I2C_PSC (0x30) +#define I2C_SCLL (0x34) +#define I2C_SCLH (0x38) +#define I2C_SYSTEST (0x3c) + +/* I2C masks */ + +/* I2C Interrupt Enable Register (I2C_IE): */ +#define I2C_IE_GC_IE (1 << 5) +#define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ +#define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ +#define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ +#define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ + +/* I2C Status Register (I2C_STAT): */ + +#define I2C_STAT_SBD (1 << 15) /* Single byte data */ +#define I2C_STAT_BB (1 << 12) /* Bus busy */ +#define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ +#define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ +#define I2C_STAT_AAS (1 << 9) /* Address as slave */ +#define I2C_STAT_GC (1 << 5) +#define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ +#define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ +#define I2C_STAT_ARDY (1 << 2) /* Register access ready */ +#define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ +#define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ + + +/* I2C Interrupt Code Register (I2C_INTCODE): */ + +#define I2C_INTCODE_MASK 7 +#define I2C_INTCODE_NONE 0 +#define I2C_INTCODE_AL 1 /* Arbitration lost */ +#define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ +#define I2C_INTCODE_ARDY 3 /* Register access ready */ +#define I2C_INTCODE_RRDY 4 /* Rcv data ready */ +#define I2C_INTCODE_XRDY 5 /* Xmit data ready */ + +/* I2C Buffer Configuration Register (I2C_BUF): */ + +#define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ +#define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ + +/* I2C Configuration Register (I2C_CON): */ + +#define I2C_CON_EN (1 << 15) /* I2C module enable */ +#define I2C_CON_BE (1 << 14) /* Big endian mode */ +#define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ +#define I2C_CON_MST (1 << 10) /* Master/slave mode */ +#define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode (master mode only) */ +#define I2C_CON_XA (1 << 8) /* Expand address */ +#define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ +#define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ + +/* I2C System Test Register (I2C_SYSTEST): */ + +#define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ +#define I2C_SYSTEST_FREE (1 << 14) /* Free running mode (on breakpoint) */ +#define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ +#define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ +#define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ +#define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ +#define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ +#define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ + +#define I2C_SCLL_SCLL (0) +#define I2C_SCLL_SCLL_M (0xFF) +#define I2C_SCLL_HSSCLL (8) +#define I2C_SCLH_HSSCLL_M (0xFF) +#define I2C_SCLH_SCLH (0) +#define I2C_SCLH_SCLH_M (0xFF) +#define I2C_SCLH_HSSCLH (8) +#define I2C_SCLH_HSSCLH_M (0xFF) + +#define OMAP_I2C_STANDARD 100 +#define OMAP_I2C_FAST_MODE 400 +#define OMAP_I2C_HIGH_SPEED 3400 + +#define SYSTEM_CLOCK_12 12000 +#define SYSTEM_CLOCK_13 13000 +#define SYSTEM_CLOCK_192 19200 +#define SYSTEM_CLOCK_96 96000 + +#define I2C_IP_CLK SYSTEM_CLOCK_96 +#define I2C_PSC_MAX (0x0f) +#define I2C_PSC_MIN (0x00) + +#endif diff --git a/include/asm-arm/arch-omap3/mem.h b/include/asm-arm/arch-omap3/mem.h new file mode 100644 index 00000000000..8c497c271c5 --- /dev/null +++ b/include/asm-arm/arch-omap3/mem.h @@ -0,0 +1,434 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP34XX_MEM_H_ +#define _OMAP34XX_MEM_H_ + +#define SDRC_CS0_OSET 0x0 +#define SDRC_CS1_OSET 0x30 /* mirror CS1 regs appear offset 0x30 from CS0 */ + +#ifndef __ASSEMBLY__ + +typedef enum { + STACKED = 0, + IP_DDR = 1, + COMBO_DDR = 2, + IP_SDR = 3, +} mem_t; + +#endif + +/* set the 343x-SDRC incoming address convention */ +#if defined(SDRC_B_R_C) +#define B_ALL (0 << 6) /* bank-row-column */ +#elif defined(SDRC_B1_R_B0_C) +#define B_ALL (1 << 6) /* bank1-row-bank0-column */ +#elif defined(SDRC_R_B_C) +#define B_ALL (2 << 6) /* row-bank-column */ +#endif + +/* Future memory combinations based on past */ +#define SDP_SDRC_MDCFG_MONO_DDR 0x0 +#define SDP_COMBO_MDCFG_0_DDR 0x0 +#define SDP_SDRC_MDCFG_0_SDR 0x0 + +/* Slower full frequency range default timings for x32 operation*/ +#define SDP_SDRC_SHARING 0x00000100 +#define SDP_SDRC_MR_0_SDR 0x00000031 + +#ifdef CONFIG_3430ZEBU +#define SDP_SDRC_MDCFG_0_DDR (0x02582019|B_ALL) /* Infin ddr module */ +#else +#define SDP_SDRC_MDCFG_0_DDR (0x02584019|B_ALL) /* Infin ddr module */ +#endif + +#define SDP_SDRC_MR_0_DDR 0x00000032 + +/* optimized timings good for current shipping parts */ +#define SDP_3430_SDRC_RFR_CTRL_100MHz 0x0002da01 +#define SDP_3430_SDRC_RFR_CTRL_133MHz 0x0003de01 /* 7.8us/7.5ns - 50=0x3de */ +#define SDP_3430_SDRC_RFR_CTRL_165MHz 0x0004e201 /* 7.8us/6ns - 50=0x4e2 */ + +#define DLL_OFFSET 0 +#define DLL_WRITEDDRCLKX2DIS 1 +#define DLL_ENADLL 1 +#define DLL_LOCKDLL 0 +#define DLL_DLLPHASE_72 0 +#define DLL_DLLPHASE_90 1 + +#define SDP_SDRC_DLLAB_CTRL ((DLL_ENADLL << 3) | \ + (DLL_LOCKDLL << 2) | (DLL_DLLPHASE_90 << 1)) + +#ifdef CONFIG_3430LABRADOR +/* Micron part of 3430 LABRADOR (133MHz optimized) ~ 7.5ns + * TDAL = Twr/Tck + Trp/tck = 15/7.5 + 22.5/7.5 = 2 + 3 = 5 + * TDPL = 15/7.5 = 2 + * TRRD = 15/7.5 = 2 + * TRCD = 22.5/7.5 = 3 + * TRP = 22.5/7.5 = 3 + * TRAS = 45/7.5 = 6 + * TRC = 75/7.5 = 10 + * TRFC = 125/7.5 = 16.6->17 + * ACTIMB + * TWTR = 1 + * TCKE = 1 + * TXSR = 138/7.5 = 18.3->19 + * TXP = 25/7.5 = 3.3->4 + */ +#define TDAL_133 5 +#define TDPL_133 2 +#define TRRD_133 2 +#define TRCD_133 3 +#define TRP_133 3 +#define TRAS_133 6 +#define TRC_133 10 +#define TRFC_133 17 +#define V_ACTIMA_133 ((TRFC_133 << 27) | (TRC_133 << 22) | (TRAS_133 << 18) \ + |(TRP_133 << 15) | (TRCD_133 << 12) |(TRRD_133 << 9) |(TDPL_133 << 6) \ + | (TDAL_133)) + +#define TWTR_133 1 +#define TCKE_133 1 +#define TXSR_133 19 +#define TXP_133 4 +#define V_ACTIMB_133 ((TWTR_133 << 16) | (TCKE_133 << 12) | (TXP_133 << 8) \ + | (TXSR_133 << 0)) +#else +/* Infineon part of 3430SDP (133MHz optimized) ~ 7.5ns + * TDAL = Twr/Tck + Trp/tck = 15/7.5 + 22.5/7.5 = 2 + 3 = 5 + * TDPL = 15/7.5 = 2 + * TRRD = 15/2.5 = 2 + * TRCD = 22.5/7.5 = 3 + * TRP = 22.5/7.5 = 3 + * TRAS = 45/7.5 = 6 + * TRC = 65/7.5 = 8.6->9 + * TRFC = 75/7.5 = 10 + * ACTIMB + * TCKE = 2 + * XSR = 120/7.5 = 16 + */ +#define TDAL_133 5 +#define TDPL_133 2 +#define TRRD_133 2 +#define TRCD_133 3 +#define TRP_133 3 +#define TRAS_133 6 +#define TRC_133 9 +#define TRFC_133 10 +#define V_ACTIMA_133 ((TRFC_133 << 27) | (TRC_133 << 22) | (TRAS_133 << 18) \ + |(TRP_133 << 15) | (TRCD_133 << 12) |(TRRD_133 << 9) |(TDPL_133 << 6) \ + | (TDAL_133)) + +#define TWTR_133 1 +#define TCKE_133 2 +#define TXP_133 2 +#define XSR_133 16 +#define V_ACTIMB_133 ((TCKE_133 << 12) | (XSR_133 << 0)) | \ + (TXP_133 << 8) | (TWTR_133 << 16) + +#define V_ACTIMA_100 V_ACTIMA_133 +#define V_ACTIMB_100 V_ACTIMB_133 +#endif + +/* Infineon part of 3430SDP (165MHz optimized) 6.06ns + * ACTIMA + * TDAL = Twr/Tck + Trp/tck = 15/6 + 18/6 = 2.5 + 3 = 5.5 -> 6 + * TDPL (Twr) = 15/6 = 2.5 -> 3 + * TRRD = 12/6 = 2 + * TRCD = 18/6 = 3 + * TRP = 18/6 = 3 + * TRAS = 42/6 = 7 + * TRC = 60/6 = 10 + * TRFC = 72/6 = 12 + * ACTIMB + * TCKE = 2 + * XSR = 120/6 = 20 + */ +#define TDAL_165 6 +#define TDPL_165 3 +#define TRRD_165 2 +#define TRCD_165 3 +#define TRP_165 3 +#define TRAS_165 7 +#define TRC_165 10 +#define TRFC_165 12 +#define V_ACTIMA_165 ((TRFC_165 << 27) | (TRC_165 << 22) | (TRAS_165 << 18) \ + | (TRP_165 << 15) | (TRCD_165 << 12) |(TRRD_165 << 9) | \ + (TDPL_165 << 6) | (TDAL_165)) + +#define TWTR_165 1 +#define TCKE_165 2 +#define TXP_165 2 +#define XSR_165 20 +#define V_ACTIMB_165 ((TCKE_165 << 12) | (XSR_165 << 0)) | \ + (TXP_165 << 8) | (TWTR_165 << 16) + +/* New and compatability speed defines */ +#if defined(PRCM_CLK_CFG2_200MHZ) || defined(PRCM_CONFIG_II) || defined(PRCM_CONFIG_5B) +# define L3_100MHZ /* Use with <= 100MHz SDRAM */ +#elif defined (PRCM_CLK_CFG2_266MHZ) || defined(PRCM_CONFIG_III) || defined(PRCM_CONFIG_5A) +# define L3_133MHZ /* Use with <= 133MHz SDRAM*/ +#elif defined(PRCM_CLK_CFG2_332MHZ) || defined(PRCM_CONFIG_I) || defined(PRCM_CONFIG_2) +# define L3_165MHZ /* Use with <= 165MHz SDRAM (L3=166 on 3430) */ +#endif + +#if defined(L3_100MHZ) +# define SDP_SDRC_ACTIM_CTRLA_0 V_ACTIMA_100 +# define SDP_SDRC_ACTIM_CTRLB_0 V_ACTIMB_100 +# define SDP_SDRC_RFR_CTRL SDP_3430_SDRC_RFR_CTRL_100MHz +#elif defined(L3_133MHZ) +# define SDP_SDRC_ACTIM_CTRLA_0 V_ACTIMA_133 +# define SDP_SDRC_ACTIM_CTRLB_0 V_ACTIMB_133 +# define SDP_SDRC_RFR_CTRL SDP_3430_SDRC_RFR_CTRL_133MHz +#elif defined(L3_165MHZ) +# define SDP_SDRC_ACTIM_CTRLA_0 V_ACTIMA_165 +# define SDP_SDRC_ACTIM_CTRLB_0 V_ACTIMB_165 +# define SDP_SDRC_RFR_CTRL SDP_3430_SDRC_RFR_CTRL_165MHz +#endif + +/* + * GPMC settings - + * Definitions is as per the following format + * # define <PART>_GPMC_CONFIG<x> <value> + * Where: + * PART is the part name e.g. STNOR - Intel Strata Flash + * x is GPMC config registers from 1 to 6 (there will be 6 macros) + * Value is corresponding value + * + * For every valid PRCM configuration there should be only one definition of + * the same. if values are independent of the board, this definition will be + * present in this file if values are dependent on the board, then this should + * go into corresponding mem-boardName.h file + * + * Currently valid part Names are (PART): + * STNOR - Intel Strata Flash + * SMNAND - Samsung NAND + * M_NAND - Micron Large page x16 NAND + * MPDB - H4 MPDB board + * SBNOR - Sibley NOR + * ONNAND - Samsung One NAND + * + * include/configs/file.h contains the defn - for all CS we are interested + * #define OMAP34XX_GPMC_CSx PART + * #define OMAP34XX_GPMC_CSx_SIZE Size + * #define OMAP34XX_GPMC_CSx_MAP Map + * Where: + * x - CS number + * PART - Part Name as defined above + * SIZE - how big is the mapping to be + * GPMC_SIZE_128M - 0x8 + * GPMC_SIZE_64M - 0xC + * GPMC_SIZE_32M - 0xE + * GPMC_SIZE_16M - 0xF + * MAP - Map this CS to which address(GPMC address space)- Absolute address + * >>24 before being used. + */ +#define GPMC_SIZE_128M 0x8 +#define GPMC_SIZE_64M 0xC +#define GPMC_SIZE_32M 0xE +#define GPMC_SIZE_16M 0xF + +#if defined(L3_100MHZ) +# define SMNAND_GPMC_CONFIG1 0x0 +# define SMNAND_GPMC_CONFIG2 0x00141400 +# define SMNAND_GPMC_CONFIG3 0x00141400 +# define SMNAND_GPMC_CONFIG4 0x0F010F01 +# define SMNAND_GPMC_CONFIG5 0x010C1414 +# define SMNAND_GPMC_CONFIG6 0x00000A80 + +# define M_NAND_GPMC_CONFIG1 0x00001800 +# define M_NAND_GPMC_CONFIG2 0x00141400 +# define M_NAND_GPMC_CONFIG3 0x00141400 +# define M_NAND_GPMC_CONFIG4 0x0F010F01 +# define M_NAND_GPMC_CONFIG5 0x010C1414 +# define M_NAND_GPMC_CONFIG6 0x1f0f0A80 + +# define STNOR_GPMC_CONFIG1 0x3 +# define STNOR_GPMC_CONFIG2 0x000f0f01 +# define STNOR_GPMC_CONFIG3 0x00050502 +# define STNOR_GPMC_CONFIG4 0x0C060C06 +# define STNOR_GPMC_CONFIG5 0x01131F1F +# define STNOR_GPMC_CONFIG6 0x1F0F0000 + +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001F1F00 +# define MPDB_GPMC_CONFIG3 0x00080802 +# define MPDB_GPMC_CONFIG4 0x1C091C09 +# define MPDB_GPMC_CONFIG5 0x031A1F1F +# define MPDB_GPMC_CONFIG6 0x000003C2 +#endif + +#if defined(L3_133MHZ) +# define SMNAND_GPMC_CONFIG1 0x00000800 +# define SMNAND_GPMC_CONFIG2 0x00141400 +# define SMNAND_GPMC_CONFIG3 0x00141400 +# define SMNAND_GPMC_CONFIG4 0x0F010F01 +# define SMNAND_GPMC_CONFIG5 0x010C1414 +# define SMNAND_GPMC_CONFIG6 0x1F0F0A80 +# define SMNAND_GPMC_CONFIG7 0x00000C44 + +# define M_NAND_GPMC_CONFIG1 0x00001800 /* might reuse smnand, with |= 1000 */ +# define M_NAND_GPMC_CONFIG2 0x00141400 +# define M_NAND_GPMC_CONFIG3 0x00141400 +# define M_NAND_GPMC_CONFIG4 0x0F010F01 +# define M_NAND_GPMC_CONFIG5 0x010C1414 +# define M_NAND_GPMC_CONFIG6 0x1F0F0A80 +# define M_NAND_GPMC_CONFIG7 0x00000C44 + +# define STNOR_GPMC_CONFIG1 0x1203 +# define STNOR_GPMC_CONFIG2 0x00151501 +# define STNOR_GPMC_CONFIG3 0x00060602 +# define STNOR_GPMC_CONFIG4 0x10081008 +# define STNOR_GPMC_CONFIG5 0x01131F1F +# define STNOR_GPMC_CONFIG6 0x1F0F04c4 + +# define SIBNOR_GPMC_CONFIG1 0x1200 +# define SIBNOR_GPMC_CONFIG2 0x001f1f00 +# define SIBNOR_GPMC_CONFIG3 0x00080802 +# define SIBNOR_GPMC_CONFIG4 0x1C091C09 +# define SIBNOR_GPMC_CONFIG5 0x01131F1F +# define SIBNOR_GPMC_CONFIG6 0x1F0F03C2 + +/* ES1 SDP and ES1 chip Debug FPGA */ +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001f1f01 +# define MPDB_GPMC_CONFIG3 0x00080803 +# define MPDB_GPMC_CONFIG4 0x1C091C09 +# define MPDB_GPMC_CONFIG5 0x041f1F1F +# define MPDB_GPMC_CONFIG6 0x000004C4 + +/* ES2 SDP and ES2 chip Debug FPGA */ +# define SDPV2_MPDB_GPMC_CONFIG1 0x00611200 +# define SDPV2_MPDB_GPMC_CONFIG2 0x001F1F01 +# define SDPV2_MPDB_GPMC_CONFIG3 0x00080803 +# define SDPV2_MPDB_GPMC_CONFIG4 0x1D091D09 +# define SDPV2_MPDB_GPMC_CONFIG5 0x041D1F1F +# define SDPV2_MPDB_GPMC_CONFIG6 0x1D0904C4 + +# define LAB_ENET_GPMC_CONFIG1 0x00611000 +# define LAB_ENET_GPMC_CONFIG2 0x001F1F01 +# define LAB_ENET_GPMC_CONFIG3 0x00080803 +# define LAB_ENET_GPMC_CONFIG4 0x1D091D09 +# define LAB_ENET_GPMC_CONFIG5 0x041D1F1F +# define LAB_ENET_GPMC_CONFIG6 0x1D0904C4 + +# define P2_GPMC_CONFIG1 0x0 +# define P2_GPMC_CONFIG2 0x0 +# define P2_GPMC_CONFIG3 0x0 +# define P2_GPMC_CONFIG4 0x0 +# define P2_GPMC_CONFIG5 0x0 +# define P2_GPMC_CONFIG6 0x0 + +# define ONENAND_GPMC_CONFIG1 0x00001200 +# define ONENAND_GPMC_CONFIG2 0x000c0c01 +# define ONENAND_GPMC_CONFIG3 0x00030301 +# define ONENAND_GPMC_CONFIG4 0x0c040c04 +# define ONENAND_GPMC_CONFIG5 0x010C1010 +# define ONENAND_GPMC_CONFIG6 0x1F060000 + +#endif /* endif L3_133MHZ */ + +#if defined (L3_165MHZ) +# define SMNAND_GPMC_CONFIG1 0x00000800 +# define SMNAND_GPMC_CONFIG2 0x00141400 +# define SMNAND_GPMC_CONFIG3 0x00141400 +# define SMNAND_GPMC_CONFIG4 0x0F010F01 +# define SMNAND_GPMC_CONFIG5 0x010C1414 +# define SMNAND_GPMC_CONFIG6 0x1F0F0A80 +# define SMNAND_GPMC_CONFIG7 0x00000C44 + +# define M_NAND_GPMC_CONFIG1 0x00001800 +# define M_NAND_GPMC_CONFIG2 0x00141400 +# define M_NAND_GPMC_CONFIG3 0x00141400 +# define M_NAND_GPMC_CONFIG4 0x0F010F01 +# define M_NAND_GPMC_CONFIG5 0x010C1414 +# define M_NAND_GPMC_CONFIG6 0x1F0F0A80 +# define M_NAND_GPMC_CONFIG7 0x00000C44 + +# define STNOR_GPMC_CONFIG1 0x3 +# define STNOR_GPMC_CONFIG2 0x00151501 +# define STNOR_GPMC_CONFIG3 0x00060602 +# define STNOR_GPMC_CONFIG4 0x11091109 +# define STNOR_GPMC_CONFIG5 0x01141F1F +# define STNOR_GPMC_CONFIG6 0x1F0F04c4 + +# define SIBNOR_GPMC_CONFIG1 0x1200 +# define SIBNOR_GPMC_CONFIG2 0x001f1f00 +# define SIBNOR_GPMC_CONFIG3 0x00080802 +# define SIBNOR_GPMC_CONFIG4 0x1C091C09 +# define SIBNOR_GPMC_CONFIG5 0x01131F1F +# define SIBNOR_GPMC_CONFIG6 0x1F0F03C2 + +# define SDPV2_MPDB_GPMC_CONFIG1 0x00611200 +# define SDPV2_MPDB_GPMC_CONFIG2 0x001F1F01 +# define SDPV2_MPDB_GPMC_CONFIG3 0x00080803 +# define SDPV2_MPDB_GPMC_CONFIG4 0x1D091D09 +# define SDPV2_MPDB_GPMC_CONFIG5 0x041D1F1F +# define SDPV2_MPDB_GPMC_CONFIG6 0x1D0904C4 + +# define MPDB_GPMC_CONFIG1 0x00011000 +# define MPDB_GPMC_CONFIG2 0x001f1f01 +# define MPDB_GPMC_CONFIG3 0x00080803 +# define MPDB_GPMC_CONFIG4 0x1c0b1c0a +# define MPDB_GPMC_CONFIG5 0x041f1F1F +# define MPDB_GPMC_CONFIG6 0x1F0F04C4 + +# define P2_GPMC_CONFIG1 0x0 +# define P2_GPMC_CONFIG2 0x0 +# define P2_GPMC_CONFIG3 0x0 +# define P2_GPMC_CONFIG4 0x0 +# define P2_GPMC_CONFIG5 0x0 +# define P2_GPMC_CONFIG6 0x0 + +# define ONENAND_GPMC_CONFIG1 0x00001200 +# define ONENAND_GPMC_CONFIG2 0x000F0F01 +# define ONENAND_GPMC_CONFIG3 0x00030301 +# define ONENAND_GPMC_CONFIG4 0x0F040F04 +# define ONENAND_GPMC_CONFIG5 0x010F1010 +# define ONENAND_GPMC_CONFIG6 0x1F060000 + +#endif + +/* max number of GPMC Chip Selects */ +#define GPMC_MAX_CS 8 +/* max number of GPMC regs */ +#define GPMC_MAX_REG 7 + +#define PISMO1_NOR 1 +#define PISMO1_NAND 2 +#define PISMO2_CS0 3 +#define PISMO2_CS1 4 +#define PISMO1_ONENAND 5 +#define DBG_MPDB 6 +#define PISMO2_NAND_CS0 7 +#define PISMO2_NAND_CS1 8 + +/* make it readable for the gpmc_init */ +#define PISMO1_NOR_BASE FLASH_BASE +#define PISMO1_NAND_BASE NAND_BASE +#define PISMO2_CS0_BASE PISMO2_MAP1 +#define PISMO1_ONEN_BASE ONENAND_MAP +#define DBG_MPDB_BASE DEBUG_BASE + +#endif /* endif _OMAP34XX_MEM_H_ */ diff --git a/include/asm-arm/arch-omap3/mux.h b/include/asm-arm/arch-omap3/mux.h new file mode 100644 index 00000000000..6695ac353dc --- /dev/null +++ b/include/asm-arm/arch-omap3/mux.h @@ -0,0 +1,437 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP3430_MUX_H_ +#define _OMAP3430_MUX_H_ + +/* + * OFF_PD - Off mode pull type down + * OFF_PU - Off mode pull type up + * OFF_OUT_PTD - Off Mode Mux low for OUT + * OFF_OUT_PTU - Off Mode Mux high for OUT + * OFF_IN - Off Mode Mux set to IN + * OFF_OUT - Off Mode Mux set to OUT + * OFF_EN - Off Mode Mux Enable + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + */ + +#define OFF_PD (1 << 12) +#define OFF_PU (3 << 12) +#define OFF_OUT_PTD (0 << 11) +#define OFF_OUT_PTU (1 << 11) +#define OFF_IN (1 << 10) +#define OFF_OUT (0 << 10) +#define OFF_EN (1 << 9) + +#define IEN (1 << 8) +#define IDIS (0 << 8) +#define PTU (1 << 4) +#define PTD (0 << 4) +#define EN (1 << 3) +#define DIS (0 << 3) + +#define M0 0 +#define M1 1 +#define M2 2 +#define M3 3 +#define M4 4 +#define M5 5 +#define M6 6 +#define M7 7 + +#ifdef CONFIG_OFF_PADCONF +#define OFF_IN_PD (OFF_PD | OFF_IN | OFF_EN) +#define OFF_IN_PU (OFF_PU | OFF_IN | OFF_EN) +#define OFF_OUT_PD (OFF_OUT_PTD | OFF_OUT | OFF_EN) +#define OFF_OUT_PU (OFF_OUT_PTU | OFF_OUT | OFF_EN) +#else +#define OFF_IN_PD 0 +#define OFF_IN_PU 0 +#define OFF_OUT_PD 0 +#define OFF_OUT_PU 0 +#endif /* #ifdef CONFIG_OFF_PADCONF */ + +/* + * To get the actual address the offset has to added + * with OMAP34XX_CTRL_BASE to get the actual address + */ + +/*SDRC*/ +#define CONTROL_PADCONF_SDRC_D0 0x0030 +#define CONTROL_PADCONF_SDRC_D1 0x0032 +#define CONTROL_PADCONF_SDRC_D2 0x0034 +#define CONTROL_PADCONF_SDRC_D3 0x0036 +#define CONTROL_PADCONF_SDRC_D4 0x0038 +#define CONTROL_PADCONF_SDRC_D5 0x003A +#define CONTROL_PADCONF_SDRC_D6 0x003C +#define CONTROL_PADCONF_SDRC_D7 0x003E +#define CONTROL_PADCONF_SDRC_D8 0x0040 +#define CONTROL_PADCONF_SDRC_D9 0x0042 +#define CONTROL_PADCONF_SDRC_D10 0x0044 +#define CONTROL_PADCONF_SDRC_D11 0x0046 +#define CONTROL_PADCONF_SDRC_D12 0x0048 +#define CONTROL_PADCONF_SDRC_D13 0x004A +#define CONTROL_PADCONF_SDRC_D14 0x004C +#define CONTROL_PADCONF_SDRC_D15 0x004E +#define CONTROL_PADCONF_SDRC_D16 0x0050 +#define CONTROL_PADCONF_SDRC_D17 0x0052 +#define CONTROL_PADCONF_SDRC_D18 0x0054 +#define CONTROL_PADCONF_SDRC_D19 0x0056 +#define CONTROL_PADCONF_SDRC_D20 0x0058 +#define CONTROL_PADCONF_SDRC_D21 0x005A +#define CONTROL_PADCONF_SDRC_D22 0x005C +#define CONTROL_PADCONF_SDRC_D23 0x005E +#define CONTROL_PADCONF_SDRC_D24 0x0060 +#define CONTROL_PADCONF_SDRC_D25 0x0062 +#define CONTROL_PADCONF_SDRC_D26 0x0064 +#define CONTROL_PADCONF_SDRC_D27 0x0066 +#define CONTROL_PADCONF_SDRC_D28 0x0068 +#define CONTROL_PADCONF_SDRC_D29 0x006A +#define CONTROL_PADCONF_SDRC_D30 0x006C +#define CONTROL_PADCONF_SDRC_D31 0x006E +#define CONTROL_PADCONF_SDRC_CLK 0x0070 +#define CONTROL_PADCONF_SDRC_DQS0 0x0072 +#define CONTROL_PADCONF_SDRC_DQS1 0x0074 +#define CONTROL_PADCONF_SDRC_DQS2 0x0076 +#define CONTROL_PADCONF_SDRC_DQS3 0x0078 +/*GPMC*/ +#define CONTROL_PADCONF_GPMC_A1 0x007A +#define CONTROL_PADCONF_GPMC_A2 0x007C +#define CONTROL_PADCONF_GPMC_A3 0x007E +#define CONTROL_PADCONF_GPMC_A4 0x0080 +#define CONTROL_PADCONF_GPMC_A5 0x0082 +#define CONTROL_PADCONF_GPMC_A6 0x0084 +#define CONTROL_PADCONF_GPMC_A7 0x0086 +#define CONTROL_PADCONF_GPMC_A8 0x0088 +#define CONTROL_PADCONF_GPMC_A9 0x008A +#define CONTROL_PADCONF_GPMC_A10 0x008C +#define CONTROL_PADCONF_GPMC_D0 0x008E +#define CONTROL_PADCONF_GPMC_D1 0x0090 +#define CONTROL_PADCONF_GPMC_D2 0x0092 +#define CONTROL_PADCONF_GPMC_D3 0x0094 +#define CONTROL_PADCONF_GPMC_D4 0x0096 +#define CONTROL_PADCONF_GPMC_D5 0x0098 +#define CONTROL_PADCONF_GPMC_D6 0x009A +#define CONTROL_PADCONF_GPMC_D7 0x009C +#define CONTROL_PADCONF_GPMC_D8 0x009E +#define CONTROL_PADCONF_GPMC_D9 0x00A0 +#define CONTROL_PADCONF_GPMC_D10 0x00A2 +#define CONTROL_PADCONF_GPMC_D11 0x00A4 +#define CONTROL_PADCONF_GPMC_D12 0x00A6 +#define CONTROL_PADCONF_GPMC_D13 0x00A8 +#define CONTROL_PADCONF_GPMC_D14 0x00AA +#define CONTROL_PADCONF_GPMC_D15 0x00AC +#define CONTROL_PADCONF_GPMC_nCS0 0x00AE +#define CONTROL_PADCONF_GPMC_nCS1 0x00B0 +#define CONTROL_PADCONF_GPMC_nCS2 0x00B2 +#define CONTROL_PADCONF_GPMC_nCS3 0x00B4 +#define CONTROL_PADCONF_GPMC_nCS4 0x00B6 +#define CONTROL_PADCONF_GPMC_nCS5 0x00B8 +#define CONTROL_PADCONF_GPMC_nCS6 0x00BA +#define CONTROL_PADCONF_GPMC_nCS7 0x00BC +#define CONTROL_PADCONF_GPMC_CLK 0x00BE +#define CONTROL_PADCONF_GPMC_nADV_ALE 0x00C0 +#define CONTROL_PADCONF_GPMC_nOE 0x00C2 +#define CONTROL_PADCONF_GPMC_nWE 0x00C4 +#define CONTROL_PADCONF_GPMC_nBE0_CLE 0x00C6 +#define CONTROL_PADCONF_GPMC_nBE1 0x00C8 +#define CONTROL_PADCONF_GPMC_nWP 0x00CA +#define CONTROL_PADCONF_GPMC_WAIT0 0x00CC +#define CONTROL_PADCONF_GPMC_WAIT1 0x00CE +#define CONTROL_PADCONF_GPMC_WAIT2 0x00D0 +#define CONTROL_PADCONF_GPMC_WAIT3 0x00D2 +/*DSS*/ +#define CONTROL_PADCONF_DSS_PCLK 0x00D4 +#define CONTROL_PADCONF_DSS_HSYNC 0x00D6 +#define CONTROL_PADCONF_DSS_VSYNC 0x00D8 +#define CONTROL_PADCONF_DSS_ACBIAS 0x00DA +#define CONTROL_PADCONF_DSS_DATA0 0x00DC +#define CONTROL_PADCONF_DSS_DATA1 0x00DE +#define CONTROL_PADCONF_DSS_DATA2 0x00E0 +#define CONTROL_PADCONF_DSS_DATA3 0x00E2 +#define CONTROL_PADCONF_DSS_DATA4 0x00E4 +#define CONTROL_PADCONF_DSS_DATA5 0x00E6 +#define CONTROL_PADCONF_DSS_DATA6 0x00E8 +#define CONTROL_PADCONF_DSS_DATA7 0x00EA +#define CONTROL_PADCONF_DSS_DATA8 0x00EC +#define CONTROL_PADCONF_DSS_DATA9 0x00EE +#define CONTROL_PADCONF_DSS_DATA10 0x00F0 +#define CONTROL_PADCONF_DSS_DATA11 0x00F2 +#define CONTROL_PADCONF_DSS_DATA12 0x00F4 +#define CONTROL_PADCONF_DSS_DATA13 0x00F6 +#define CONTROL_PADCONF_DSS_DATA14 0x00F8 +#define CONTROL_PADCONF_DSS_DATA15 0x00FA +#define CONTROL_PADCONF_DSS_DATA16 0x00FC +#define CONTROL_PADCONF_DSS_DATA17 0x00FE +#define CONTROL_PADCONF_DSS_DATA18 0x0100 +#define CONTROL_PADCONF_DSS_DATA19 0x0102 +#define CONTROL_PADCONF_DSS_DATA20 0x0104 +#define CONTROL_PADCONF_DSS_DATA21 0x0106 +#define CONTROL_PADCONF_DSS_DATA22 0x0108 +#define CONTROL_PADCONF_DSS_DATA23 0x010A +/*CAMERA*/ +#define CONTROL_PADCONF_CAM_HS 0x010C +#define CONTROL_PADCONF_CAM_VS 0x010E +#define CONTROL_PADCONF_CAM_XCLKA 0x0110 +#define CONTROL_PADCONF_CAM_PCLK 0x0112 +#define CONTROL_PADCONF_CAM_FLD 0x0114 +#define CONTROL_PADCONF_CAM_D0 0x0116 +#define CONTROL_PADCONF_CAM_D1 0x0118 +#define CONTROL_PADCONF_CAM_D2 0x011A +#define CONTROL_PADCONF_CAM_D3 0x011C +#define CONTROL_PADCONF_CAM_D4 0x011E +#define CONTROL_PADCONF_CAM_D5 0x0120 +#define CONTROL_PADCONF_CAM_D6 0x0122 +#define CONTROL_PADCONF_CAM_D7 0x0124 +#define CONTROL_PADCONF_CAM_D8 0x0126 +#define CONTROL_PADCONF_CAM_D9 0x0128 +#define CONTROL_PADCONF_CAM_D10 0x012A +#define CONTROL_PADCONF_CAM_D11 0x012C +#define CONTROL_PADCONF_CAM_XCLKB 0x012E +#define CONTROL_PADCONF_CAM_WEN 0x0130 +#define CONTROL_PADCONF_CAM_STROBE 0x0132 +#define CONTROL_PADCONF_CSI2_DX0 0x0134 +#define CONTROL_PADCONF_CSI2_DY0 0x0136 +#define CONTROL_PADCONF_CSI2_DX1 0x0138 +#define CONTROL_PADCONF_CSI2_DY1 0x013A +/*Audio Interface */ +#define CONTROL_PADCONF_McBSP2_FSX 0x013C +#define CONTROL_PADCONF_McBSP2_CLKX 0x013E +#define CONTROL_PADCONF_McBSP2_DR 0x0140 +#define CONTROL_PADCONF_McBSP2_DX 0x0142 +#define CONTROL_PADCONF_ +#define CONTROL_PADCONF_MMC1_CLK 0x0144 +#define CONTROL_PADCONF_MMC1_CMD 0x0146 +#define CONTROL_PADCONF_MMC1_DAT0 0x0148 +#define CONTROL_PADCONF_MMC1_DAT1 0x014A +#define CONTROL_PADCONF_MMC1_DAT2 0x014C +#define CONTROL_PADCONF_MMC1_DAT3 0x014E +#define CONTROL_PADCONF_MMC1_DAT4 0x0150 +#define CONTROL_PADCONF_MMC1_DAT5 0x0152 +#define CONTROL_PADCONF_MMC1_DAT6 0x0154 +#define CONTROL_PADCONF_MMC1_DAT7 0x0156 +/*Wireless LAN */ +#define CONTROL_PADCONF_MMC2_CLK 0x0158 +#define CONTROL_PADCONF_MMC2_CMD 0x015A +#define CONTROL_PADCONF_MMC2_DAT0 0x015C +#define CONTROL_PADCONF_MMC2_DAT1 0x015E +#define CONTROL_PADCONF_MMC2_DAT2 0x0160 +#define CONTROL_PADCONF_MMC2_DAT3 0x0162 +#define CONTROL_PADCONF_MMC2_DAT4 0x0164 +#define CONTROL_PADCONF_MMC2_DAT5 0x0166 +#define CONTROL_PADCONF_MMC2_DAT6 0x0168 +#define CONTROL_PADCONF_MMC2_DAT7 0x016A +/*Bluetooth*/ +#define CONTROL_PADCONF_McBSP3_DX 0x016C +#define CONTROL_PADCONF_McBSP3_DR 0x016E +#define CONTROL_PADCONF_McBSP3_CLKX 0x0170 +#define CONTROL_PADCONF_McBSP3_FSX 0x0172 +#define CONTROL_PADCONF_UART2_CTS 0x0174 +#define CONTROL_PADCONF_UART2_RTS 0x0176 +#define CONTROL_PADCONF_UART2_TX 0x0178 +#define CONTROL_PADCONF_UART2_RX 0x017A +/*Modem Interface */ +#define CONTROL_PADCONF_UART1_TX 0x017C +#define CONTROL_PADCONF_UART1_RTS 0x017E +#define CONTROL_PADCONF_UART1_CTS 0x0180 +#define CONTROL_PADCONF_UART1_RX 0x0182 +#define CONTROL_PADCONF_McBSP4_CLKX 0x0184 +#define CONTROL_PADCONF_McBSP4_DR 0x0186 +#define CONTROL_PADCONF_McBSP4_DX 0x0188 +#define CONTROL_PADCONF_McBSP4_FSX 0x018A +#define CONTROL_PADCONF_McBSP1_CLKR 0x018C +#define CONTROL_PADCONF_McBSP1_FSR 0x018E +#define CONTROL_PADCONF_McBSP1_DX 0x0190 +#define CONTROL_PADCONF_McBSP1_DR 0x0192 +#define CONTROL_PADCONF_McBSP_CLKS 0x0194 +#define CONTROL_PADCONF_McBSP1_FSX 0x0196 +#define CONTROL_PADCONF_McBSP1_CLKX 0x0198 +/*Serial Interface*/ +#define CONTROL_PADCONF_UART3_CTS_RCTX 0x019A +#define CONTROL_PADCONF_UART3_RTS_SD 0x019C +#define CONTROL_PADCONF_UART3_RX_IRRX 0x019E +#define CONTROL_PADCONF_UART3_TX_IRTX 0x01A0 +#define CONTROL_PADCONF_HSUSB0_CLK 0x01A2 +#define CONTROL_PADCONF_HSUSB0_STP 0x01A4 +#define CONTROL_PADCONF_HSUSB0_DIR 0x01A6 +#define CONTROL_PADCONF_HSUSB0_NXT 0x01A8 +#define CONTROL_PADCONF_HSUSB0_DATA0 0x01AA +#define CONTROL_PADCONF_HSUSB0_DATA1 0x01AC +#define CONTROL_PADCONF_HSUSB0_DATA2 0x01AE +#define CONTROL_PADCONF_HSUSB0_DATA3 0x01B0 +#define CONTROL_PADCONF_HSUSB0_DATA4 0x01B2 +#define CONTROL_PADCONF_HSUSB0_DATA5 0x01B4 +#define CONTROL_PADCONF_HSUSB0_DATA6 0x01B6 +#define CONTROL_PADCONF_HSUSB0_DATA7 0x01B8 +#define CONTROL_PADCONF_I2C1_SCL 0x01BA +#define CONTROL_PADCONF_I2C1_SDA 0x01BC +#define CONTROL_PADCONF_I2C2_SCL 0x01BE +#define CONTROL_PADCONF_I2C2_SDA 0x01C0 +#define CONTROL_PADCONF_I2C3_SCL 0x01C2 +#define CONTROL_PADCONF_I2C3_SDA 0x01C4 +#define CONTROL_PADCONF_I2C4_SCL 0x0A00 +#define CONTROL_PADCONF_I2C4_SDA 0x0A02 +#define CONTROL_PADCONF_HDQ_SIO 0x01C6 +#define CONTROL_PADCONF_McSPI1_CLK 0x01C8 +#define CONTROL_PADCONF_McSPI1_SIMO 0x01CA +#define CONTROL_PADCONF_McSPI1_SOMI 0x01CC +#define CONTROL_PADCONF_McSPI1_CS0 0x01CE +#define CONTROL_PADCONF_McSPI1_CS1 0x01D0 +#define CONTROL_PADCONF_McSPI1_CS2 0x01D2 +#define CONTROL_PADCONF_McSPI1_CS3 0x01D4 +#define CONTROL_PADCONF_McSPI2_CLK 0x01D6 +#define CONTROL_PADCONF_McSPI2_SIMO 0x01D8 +#define CONTROL_PADCONF_McSPI2_SOMI 0x01DA +#define CONTROL_PADCONF_McSPI2_CS0 0x01DC +#define CONTROL_PADCONF_McSPI2_CS1 0x01DE +/*Control and debug */ +#define CONTROL_PADCONF_SYS_32K 0x0A04 +#define CONTROL_PADCONF_SYS_CLKREQ 0x0A06 +#define CONTROL_PADCONF_SYS_nIRQ 0x01E0 +#define CONTROL_PADCONF_SYS_BOOT0 0x0A0A +#define CONTROL_PADCONF_SYS_BOOT1 0x0A0C +#define CONTROL_PADCONF_SYS_BOOT2 0x0A0E +#define CONTROL_PADCONF_SYS_BOOT3 0x0A10 +#define CONTROL_PADCONF_SYS_BOOT4 0x0A12 +#define CONTROL_PADCONF_SYS_BOOT5 0x0A14 +#define CONTROL_PADCONF_SYS_BOOT6 0x0A16 +#define CONTROL_PADCONF_SYS_OFF_MODE 0x0A18 +#define CONTROL_PADCONF_SYS_CLKOUT1 0x0A1A +#define CONTROL_PADCONF_SYS_CLKOUT2 0x01E2 +#define CONTROL_PADCONF_JTAG_nTRST 0x0A1C +#define CONTROL_PADCONF_JTAG_TCK 0x0A1E +#define CONTROL_PADCONF_JTAG_TMS 0x0A20 +#define CONTROL_PADCONF_JTAG_TDI 0x0A22 +#define CONTROL_PADCONF_JTAG_EMU0 0x0A24 +#define CONTROL_PADCONF_JTAG_EMU1 0x0A26 + +#define CONTROL_PADCONF_ETK_CLK 0x0A28 +#define CONTROL_PADCONF_ETK_CTL 0x0A2A +#define CONTROL_PADCONF_ETK_D0 0x0A2C +#define CONTROL_PADCONF_ETK_D1 0x0A2E +#define CONTROL_PADCONF_ETK_D2 0x0A30 +#define CONTROL_PADCONF_ETK_D3 0x0A32 +#define CONTROL_PADCONF_ETK_D4 0x0A34 +#define CONTROL_PADCONF_ETK_D5 0x0A36 +#define CONTROL_PADCONF_ETK_D6 0x0A38 +#define CONTROL_PADCONF_ETK_D7 0x0A3A +#define CONTROL_PADCONF_ETK_D8 0x0A3C +#define CONTROL_PADCONF_ETK_D9 0x0A3E +#define CONTROL_PADCONF_ETK_D10 0x0A40 +#define CONTROL_PADCONF_ETK_D11 0x0A42 +#define CONTROL_PADCONF_ETK_D12 0x0A44 +#define CONTROL_PADCONF_ETK_D13 0x0A46 +#define CONTROL_PADCONF_ETK_D14 0x0A48 +#define CONTROL_PADCONF_ETK_D15 0x0A4A + +#define CONTROL_PADCONF_ETK_CLK_ES2 0x05D8 +#define CONTROL_PADCONF_ETK_CTL_ES2 0x05DA +#define CONTROL_PADCONF_ETK_D0_ES2 0x05DC +#define CONTROL_PADCONF_ETK_D1_ES2 0x05DE +#define CONTROL_PADCONF_ETK_D2_ES2 0x05E0 +#define CONTROL_PADCONF_ETK_D3_ES2 0x05E2 +#define CONTROL_PADCONF_ETK_D4_ES2 0x05E4 +#define CONTROL_PADCONF_ETK_D5_ES2 0x05E6 +#define CONTROL_PADCONF_ETK_D6_ES2 0x05E8 +#define CONTROL_PADCONF_ETK_D7_ES2 0x05EA +#define CONTROL_PADCONF_ETK_D8_ES2 0x05EC +#define CONTROL_PADCONF_ETK_D9_ES2 0x05EE +#define CONTROL_PADCONF_ETK_D10_ES2 0x05F0 +#define CONTROL_PADCONF_ETK_D11_ES2 0x05F2 +#define CONTROL_PADCONF_ETK_D12_ES2 0x05F4 +#define CONTROL_PADCONF_ETK_D13_ES2 0x05F6 +#define CONTROL_PADCONF_ETK_D14_ES2 0x05F8 +#define CONTROL_PADCONF_ETK_D15_ES2 0x05FA + +/*Die to Die */ +#define CONTROL_PADCONF_d2d_mcad0 0x01E4 +#define CONTROL_PADCONF_d2d_mcad1 0x01E6 +#define CONTROL_PADCONF_d2d_mcad2 0x01E8 +#define CONTROL_PADCONF_d2d_mcad3 0x01EA +#define CONTROL_PADCONF_d2d_mcad4 0x01EC +#define CONTROL_PADCONF_d2d_mcad5 0x01EE +#define CONTROL_PADCONF_d2d_mcad6 0x01F0 +#define CONTROL_PADCONF_d2d_mcad7 0x01F2 +#define CONTROL_PADCONF_d2d_mcad8 0x01F4 +#define CONTROL_PADCONF_d2d_mcad9 0x01F6 +#define CONTROL_PADCONF_d2d_mcad10 0x01F8 +#define CONTROL_PADCONF_d2d_mcad11 0x01FA +#define CONTROL_PADCONF_d2d_mcad12 0x01FC +#define CONTROL_PADCONF_d2d_mcad13 0x01FE +#define CONTROL_PADCONF_d2d_mcad14 0x0200 +#define CONTROL_PADCONF_d2d_mcad15 0x0202 +#define CONTROL_PADCONF_d2d_mcad16 0x0204 +#define CONTROL_PADCONF_d2d_mcad17 0x0206 +#define CONTROL_PADCONF_d2d_mcad18 0x0208 +#define CONTROL_PADCONF_d2d_mcad19 0x020A +#define CONTROL_PADCONF_d2d_mcad20 0x020C +#define CONTROL_PADCONF_d2d_mcad21 0x020E +#define CONTROL_PADCONF_d2d_mcad22 0x0210 +#define CONTROL_PADCONF_d2d_mcad23 0x0212 +#define CONTROL_PADCONF_d2d_mcad24 0x0214 +#define CONTROL_PADCONF_d2d_mcad25 0x0216 +#define CONTROL_PADCONF_d2d_mcad26 0x0218 +#define CONTROL_PADCONF_d2d_mcad27 0x021A +#define CONTROL_PADCONF_d2d_mcad28 0x021C +#define CONTROL_PADCONF_d2d_mcad29 0x021E +#define CONTROL_PADCONF_d2d_mcad30 0x0220 +#define CONTROL_PADCONF_d2d_mcad31 0x0222 +#define CONTROL_PADCONF_d2d_mcad32 0x0224 +#define CONTROL_PADCONF_d2d_mcad33 0x0226 +#define CONTROL_PADCONF_d2d_mcad34 0x0228 +#define CONTROL_PADCONF_d2d_mcad35 0x022A +#define CONTROL_PADCONF_d2d_mcad36 0x022C +#define CONTROL_PADCONF_d2d_clk26mi 0x022E +#define CONTROL_PADCONF_d2d_nrespwron 0x0230 +#define CONTROL_PADCONF_d2d_nreswarm 0x0232 +#define CONTROL_PADCONF_d2d_arm9nirq 0x0234 +#define CONTROL_PADCONF_d2d_uma2p6fiq 0x0236 +#define CONTROL_PADCONF_d2d_spint 0x0238 +#define CONTROL_PADCONF_d2d_frint 0x023A +#define CONTROL_PADCONF_d2d_dmareq0 0x023C +#define CONTROL_PADCONF_d2d_dmareq1 0x023E +#define CONTROL_PADCONF_d2d_dmareq2 0x0240 +#define CONTROL_PADCONF_d2d_dmareq3 0x0242 +#define CONTROL_PADCONF_d2d_n3gtrst 0x0244 +#define CONTROL_PADCONF_d2d_n3gtdi 0x0246 +#define CONTROL_PADCONF_d2d_n3gtdo 0x0248 +#define CONTROL_PADCONF_d2d_n3gtms 0x024A +#define CONTROL_PADCONF_d2d_n3gtck 0x024C +#define CONTROL_PADCONF_d2d_n3grtck 0x024E +#define CONTROL_PADCONF_d2d_mstdby 0x0250 +#define CONTROL_PADCONF_d2d_swakeup 0x0A4C +#define CONTROL_PADCONF_d2d_idlereq 0x0252 +#define CONTROL_PADCONF_d2d_idleack 0x0254 +#define CONTROL_PADCONF_d2d_mwrite 0x0256 +#define CONTROL_PADCONF_d2d_swrite 0x0258 +#define CONTROL_PADCONF_d2d_mread 0x025A +#define CONTROL_PADCONF_d2d_sread 0x025C +#define CONTROL_PADCONF_d2d_mbusflag 0x025E +#define CONTROL_PADCONF_d2d_sbusflag 0x0260 +#define CONTROL_PADCONF_sdrc_cke0 0x0262 +#define CONTROL_PADCONF_sdrc_cke1 0x0264 + +#endif diff --git a/include/asm-arm/arch-omap3/omap3430.h b/include/asm-arm/arch-omap3/omap3430.h new file mode 100644 index 00000000000..405346eef30 --- /dev/null +++ b/include/asm-arm/arch-omap3/omap3430.h @@ -0,0 +1,132 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP3430_SYS_H_ +#define _OMAP3430_SYS_H_ + +#include <asm/arch/sizes.h> + +/* + * 3430 specific Section + */ + +/* Stuff on L3 Interconnect */ +#define SMX_APE_BASE 0x68000000 + +/* L3 Firewall */ +#define A_REQINFOPERM0 (SMX_APE_BASE + 0x05048) +#define A_READPERM0 (SMX_APE_BASE + 0x05050) +#define A_WRITEPERM0 (SMX_APE_BASE + 0x05058) + +/* GPMC */ +#define OMAP34XX_GPMC_BASE (0x6E000000) + +/* SMS */ +#define OMAP34XX_SMS_BASE 0x6C000000 + +/* SDRC */ +#define OMAP34XX_SDRC_BASE 0x6D000000 + +/* + * L4 Peripherals - L4 Wakeup and L4 Core now + */ +#define OMAP34XX_CORE_L4_IO_BASE 0x48000000 + +#define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000 + +#define OMAP34XX_L4_PER 0x49000000 + +#define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE + +/* CONTROL */ +#define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE+0x2000) + +/* TAP information dont know for 3430*/ +#define OMAP34XX_TAP_BASE (0x49000000) /*giving some junk for virtio */ + +/* UART */ +#define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE+0x6a000) +#define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE+0x6c000) +#define OMAP34XX_UART3 (OMAP34XX_L4_PER+0x20000) + +/* General Purpose Timers */ +#define OMAP34XX_GPT1 0x48318000 +#define OMAP34XX_GPT2 0x49032000 +#define OMAP34XX_GPT3 0x49034000 +#define OMAP34XX_GPT4 0x49036000 +#define OMAP34XX_GPT5 0x49038000 +#define OMAP34XX_GPT6 0x4903A000 +#define OMAP34XX_GPT7 0x4903C000 +#define OMAP34XX_GPT8 0x4903E000 +#define OMAP34XX_GPT9 0x49040000 +#define OMAP34XX_GPT10 0x48086000 +#define OMAP34XX_GPT11 0x48088000 +#define OMAP34XX_GPT12 0x48304000 + +/* WatchDog Timers (1 secure, 3 GP) */ +#define WD1_BASE (0x4830C000) +#define WD2_BASE (0x48314000) +#define WD3_BASE (0x49030000) + +/* 32KTIMER */ +#define SYNC_32KTIMER_BASE (0x48320000) +#define S32K_CR (SYNC_32KTIMER_BASE+0x10) + +/* + * SDP3430 specific Section + */ + +/* + * The 343x's chip selects are programmable. The mask ROM + * does configure CS0 to 0x08000000 before dispatch. So, if + * you want your code to live below that address, you have to + * be prepared to jump though hoops, to reset the base address. + * Same as in SDP3430 + */ +#ifdef CONFIG_OMAP34XX +/* base address for indirect vectors (internal boot mode) */ +#define SRAM_OFFSET0 0x40000000 +#define SRAM_OFFSET1 0x00200000 +#define SRAM_OFFSET2 0x0000F800 +#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) +#define LOW_LEVEL_SRAM_STACK 0x4020FFFC +#endif + +#if defined(CONFIG_3430SDP) +/* FPGA on Debug board.*/ +# define ETH_CONTROL_REG (DEBUG_BASE+0x30b) +# define LAN_RESET_REGISTER (DEBUG_BASE+0x1c) + +# define DIP_SWITCH_INPUT_REG2 (DEBUG_BASE+0x60) +# define LED_REGISTER (DEBUG_BASE+0x40) +# define FPGA_REV_REGISTER (DEBUG_BASE+0x10) +# define EEPROM_MAIN_BRD (DEBUG_BASE+0x10000+0x1800) +# define EEPROM_CONN_BRD (DEBUG_BASE+0x10000+0x1900) +# define EEPROM_UI_BRD (DEBUG_BASE+0x10000+0x1A00) +# define EEPROM_MCAM_BRD (DEBUG_BASE+0x10000+0x1B00) +# define ENHANCED_UI_EE_NAME "750-2075" +#endif + +#endif /* _OMAP3430_SYS_H_ */ diff --git a/include/asm-arm/arch-omap3/rev.h b/include/asm-arm/arch-omap3/rev.h new file mode 100644 index 00000000000..c0e95d4be1e --- /dev/null +++ b/include/asm-arm/arch-omap3/rev.h @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP34XX_REV_H_ +#define _OMAP34XX_REV_H_ + +#define CDB_DDR_COMBO /* combo part on cpu daughter card */ +#define CDB_DDR_IPDB /* 2x16 parts on daughter card */ + +#define DDR_100 100 /* type found on most mem d-boards */ +#define DDR_111 111 /* some combo parts */ +#define DDR_133 133 /* most combo, some mem d-boards */ +#define DDR_165 165 /* future parts */ + +#define CPU_3430 0x3430 + +#define CPU_3430_ES1 1 +#define CPU_3430_ES2 1 + +#endif diff --git a/include/asm-arm/arch-omap3/sizes.h b/include/asm-arm/arch-omap3/sizes.h new file mode 100644 index 00000000000..aaba18f1507 --- /dev/null +++ b/include/asm-arm/arch-omap3/sizes.h @@ -0,0 +1,49 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* Size defintions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_32K 0x00008000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_31M 0x01F00000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif /* __sizes_h */ diff --git a/include/asm-arm/arch-omap3/sys_info.h b/include/asm-arm/arch-omap3/sys_info.h new file mode 100644 index 00000000000..18e2b491c76 --- /dev/null +++ b/include/asm-arm/arch-omap3/sys_info.h @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _OMAP34XX_SYS_INFO_H_ +#define _OMAP34XX_SYS_INFO_H_ + +#define XDR_POP 5 /* package on package part */ +#define SDR_DISCRETE 4 /* 128M memory SDR module*/ +#define DDR_STACKED 3 /* stacked part on 2422 */ +#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */ +#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */ + +#define DDR_100 100 /* type found on most mem d-boards */ +#define DDR_111 111 /* some combo parts */ +#define DDR_133 133 /* most combo, some mem d-boards */ +#define DDR_165 165 /* future parts */ + +#define CPU_3430 0x3430 + +/* 343x real hardware: + * ES1 = rev 0 + */ + +/* 343x code defines: + * ES1 = 0+1 = 1 + * ES1 = 1+1 = 1 + */ +#define CPU_3430_ES1 1 +#define CPU_3430_ES2 2 + +/* Currently Virtio models this one */ +#define CPU_3430_CHIPID 0x0B68A000 + +#define GPMC_MUXED 1 +#define GPMC_NONMUXED 0 + +#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */ +#define TYPE_NOR 0x000 +#define TYPE_ONENAND 0x800 + +#define WIDTH_8BIT 0x0000 +#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */ + +#define I2C_MENELAUS 0x72 /* i2c id for companion chip */ +#define I2C_TRITON2 0x4B /* addres of power group */ + +#define BOOT_FAST_XIP 0x1f + +/* SDP definitions according to FPGA Rev. Is this OK?? */ +#define SDP_3430_V1 0x1 +#define SDP_3430_V2 0x2 + +#define BOARD_3430_LABRADOR 0x80 +#define BOARD_3430_LABRADOR_V1 0x1 + +#endif diff --git a/include/asm-arm/arch-omap3/sys_proto.h b/include/asm-arm/arch-omap3/sys_proto.h new file mode 100644 index 00000000000..7ac53a20186 --- /dev/null +++ b/include/asm-arm/arch-omap3/sys_proto.h @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2004-2006 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _OMAP34XX_SYS_PROTO_H_ +#define _OMAP34XX_SYS_PROTO_H_ + +void prcm_init(void); +void per_clocks_enable(void); + +void memif_init(void); +void sdrc_init(void); +void do_sdrc_init(u32,u32); +void gpmc_init(void); + +void ether_init(void); +void watchdog_init(void); +void set_muxconf_regs(void); + +u32 get_cpu_type(void); +u32 get_cpu_rev(void); +u32 cpu_is_3410(void); +u32 get_mem_type(void); +u32 get_sysboot_value(void); +u32 get_gpmc0_base(void); +u32 is_gpmc_muxed(void); +u32 get_gpmc0_type(void); +u32 get_gpmc0_width(void); +u32 get_board_type(void); +void display_board_info(u32); +void update_mux(u32,u32); +u32 get_sdr_cs_size(u32 offset); +u32 running_in_sdram(void); +u32 running_in_sram(void); +u32 running_in_flash(void); +u32 running_from_internal_boot(void); +u32 get_device_type(void); + +void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value); +u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound); +void sdelay(unsigned long loops); + +#endif diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index 3ff1d26145c..c8c479a1869 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -92,6 +92,10 @@ typedef struct { volatile u32 offset[4096]; } __regbase; # define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) # else # define __REG(x) (x) +# ifdef CONFIG_CPU_MONAHANS /* Hack to make this work with mona's pxa-regs.h */ +# define __REG_2(x) (x) +# define __REG_3(x) (x) +# endif # endif #endif /* UBOOT_REG_FIX */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 41d37d791a8..ebda7192ed0 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -33,12 +33,21 @@ typedef void (*ExcpHndlr) (void) ; /* * PXA Chip selects */ +#ifdef CONFIG_CPU_MONAHANS +#define PXA_CS0_PHYS 0x00000000 /* for both small and large same start */ +#define PXA_CS1_PHYS 0x04000000 /* Small partition start address (64MB) */ +#define PXA_CS1_LPHYS 0x30000000 /* Large partition start address (256MB) */ +#define PXA_CS2_PHYS 0x10000000 /* (64MB) */ +#define PXA_CS3_PHYS 0x14000000 /* (64MB) */ +#define PXA_PCMCIA_PHYS 0x20000000 /* (256MB) */ +#else #define PXA_CS0_PHYS 0x00000000 #define PXA_CS1_PHYS 0x04000000 #define PXA_CS2_PHYS 0x08000000 #define PXA_CS3_PHYS 0x0C000000 #define PXA_CS4_PHYS 0x10000000 #define PXA_CS5_PHYS 0x14000000 +#endif /* CONFIG_CPU_MONAHANS */ /* * Personal Computer Memory Card International Association (PCMCIA) sockets @@ -49,10 +58,12 @@ typedef void (*ExcpHndlr) (void) ; #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ +#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */ #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ +#endif #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ @@ -72,10 +83,12 @@ typedef void (*ExcpHndlr) (void) ; #define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ #define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ +#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */ #define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ #define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ #define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ #define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ +#endif /* * DMA Controller @@ -96,6 +109,24 @@ typedef void (*ExcpHndlr) (void) ; #define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ #define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ #define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ +#ifdef CONFIG_CPU_MONAHANS +#define DCSR16 __REG(0x40000040) /* DMA Control / Status Register for Channel 16 */ +#define DCSR17 __REG(0x40000044) /* DMA Control / Status Register for Channel 17 */ +#define DCSR18 __REG(0x40000048) /* DMA Control / Status Register for Channel 18 */ +#define DCSR19 __REG(0x4000004c) /* DMA Control / Status Register for Channel 19 */ +#define DCSR20 __REG(0x40000050) /* DMA Control / Status Register for Channel 20 */ +#define DCSR21 __REG(0x40000054) /* DMA Control / Status Register for Channel 21 */ +#define DCSR22 __REG(0x40000058) /* DMA Control / Status Register for Channel 22 */ +#define DCSR23 __REG(0x4000005c) /* DMA Control / Status Register for Channel 23 */ +#define DCSR24 __REG(0x40000060) /* DMA Control / Status Register for Channel 24 */ +#define DCSR25 __REG(0x40000064) /* DMA Control / Status Register for Channel 25 */ +#define DCSR26 __REG(0x40000068) /* DMA Control / Status Register for Channel 26 */ +#define DCSR27 __REG(0x4000006c) /* DMA Control / Status Register for Channel 27 */ +#define DCSR28 __REG(0x40000070) /* DMA Control / Status Register for Channel 28 */ +#define DCSR29 __REG(0x40000074) /* DMA Control / Status Register for Channel 29 */ +#define DCSR30 __REG(0x40000078) /* DMA Control / Status Register for Channel 30 */ +#define DCSR31 __REG(0x4000007c) /* DMA Control / Status Register for Channel 31 */ +#endif /* CONFIG_CPU_MONAHANS */ #define DCSR(x) __REG2(0x40000000, (x) << 2) @@ -103,7 +134,7 @@ typedef void (*ExcpHndlr) (void) ; #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ #define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ -#if defined(CONFIG_PXA27X) +#if defined(CONFIG_PXA27X) || defined (CONFIG_CPU_MONAHANS) #define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ #define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ #define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ @@ -444,11 +475,11 @@ typedef void (*ExcpHndlr) (void) ; #define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */ #define ICR_TB 0x8 /* transfer byte bit */ #define ICR_MA 0x10 /* master abort */ -#define ICR_SCLE 0x20 /* master clock enable */ +#define ICR_SCLE 0x20 /* master clock enable, mona SCLEA */ #define ICR_IUE 0x40 /* unit enable */ #define ICR_GCD 0x80 /* general call disable */ #define ICR_ITEIE 0x100 /* enable tx interrupts */ -#define ICR_IRFIE 0x200 /* enable rx interrupts */ +#define ICR_IRFIE 0x200 /* enable rx interrupts, mona: DRFIE */ #define ICR_BEIE 0x400 /* enable bus error ints */ #define ICR_SSDIE 0x800 /* slave STOP detected int enable */ #define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ @@ -790,21 +821,21 @@ typedef void (*ExcpHndlr) (void) ; #define RTAR __REG(0x40900004) /* RTC Alarm Register */ #define RTSR __REG(0x40900008) /* RTC Status Register */ #define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ -#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */ -#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */ -#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */ -#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */ -#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */ -#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */ -#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ -#define RDCR __REG(0x40900010) /* RTC Day Count Register. */ -#define RYCR __REG(0x40900014) /* RTC Year Count Register. */ -#define SWCR __REG(0x40900028) /* Stopwatch Count Register */ -#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */ - -#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ -#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ -#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */ +#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */ +#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */ +#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */ +#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */ +#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */ +#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */ +#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ +#define RDCR __REG(0x40900010) /* RTC Day Count Register. */ +#define RYCR __REG(0x40900014) /* RTC Year Count Register. */ +#define SWCR __REG(0x40900028) /* Stopwatch Count Register */ +#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */ + +#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ +#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ +#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */ #define RTSR_HZE (1 << 3) /* HZ interrupt enable */ #define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ @@ -813,15 +844,47 @@ typedef void (*ExcpHndlr) (void) ; /* * OS Timer & Match Registers */ -#define OSMR0 __REG(0x40A00000) /* */ -#define OSMR1 __REG(0x40A00004) /* */ -#define OSMR2 __REG(0x40A00008) /* */ -#define OSMR3 __REG(0x40A0000C) /* */ +#define OSMR0 __REG(0x40A00000) /* OS Timer Match Register 0 */ +#define OSMR1 __REG(0x40A00004) /* OS Timer Match Register 1 */ +#define OSMR2 __REG(0x40A00008) /* OS Timer Match Register 2 */ +#define OSMR3 __REG(0x40A0000C) /* OS Timer Match Register 3 */ #define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ #define OSSR __REG(0x40A00014) /* OS Timer Status Register */ #define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ #define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ +#ifdef CONFIG_CPU_MONAHANS +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register 4 */ +#define OSCR5 __REG(0x40A00044) /* OS Timer Counter Register 5 */ +#define OSCR6 __REG(0x40A00048) /* OS Timer Counter Register 6 */ +#define OSCR7 __REG(0x40A0004C) /* OS Timer Counter Register 7 */ +#define OSCR8 __REG(0x40A00050) /* OS Timer Counter Register 8 */ +#define OSCR9 __REG(0x40A00054) /* OS Timer Counter Register 9 */ +#define OSCR10 __REG(0x40A00058) /* OS Timer Counter Register 10 */ +#define OSCR11 __REG(0x40A0005C) /* OS Timer Counter Register 11 */ + +#define OSMR4 __REG(0x40A00080) /* OS Timer Match Register 4 */ +#define OSMR5 __REG(0x40A00084) /* OS Timer Match Register 5 */ +#define OSMR6 __REG(0x40A00088) /* OS Timer Match Register 6 */ +#define OSMR7 __REG(0x40A0008C) /* OS Timer Match Register 7 */ +#define OSMR8 __REG(0x40A00090) /* OS Timer Match Register 8 */ +#define OSMR9 __REG(0x40A00094) /* OS Timer Match Register 9 */ +#define OSMR10 __REG(0x40A00098) /* OS Timer Match Register 10 */ +#define OSMR11 __REG(0x40A0009C) /* OS Timer Match Register 11 */ + +#define OMCR4 __REG(0x40A000C0) /* OS Match Control Register 4 */ +#define OMCR5 __REG(0x40A000C4) /* OS Match Control Register 5 */ +#define OMCR6 __REG(0x40A000C8) /* OS Match Control Register 6 */ +#define OMCR7 __REG(0x40A000CC) /* OS Match Control Register 7 */ +#define OMCR8 __REG(0x40A000D0) /* OS Match Control Register 8 */ +#define OMCR9 __REG(0x40A000D4) /* OS Match Control Register 9 */ +#define OMCR10 __REG(0x40A000D8) /* OS Match Control Register 10 */ +#define OMCR11 __REG(0x40A000DC) /* OS Match Control Register 11 */ + +#define OSCR_CLK_FREQ 3.250 /* MHz */ +#endif /* CONFIG_CPU_MONAHANS */ + +#define OSSR_M4 (1 << 4) /* Match status channel 4 */ #define OSSR_M3 (1 << 3) /* Match status channel 3 */ #define OSSR_M2 (1 << 2) /* Match status channel 2 */ #define OSSR_M1 (1 << 1) /* Match status channel 1 */ @@ -829,6 +892,7 @@ typedef void (*ExcpHndlr) (void) ; #define OWER_WME (1 << 0) /* Watchdog Match Enable */ +#define OIER_E4 (1 << 4) /* Interrupt enable channel 4 */ #define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ #define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ #define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ @@ -855,6 +919,20 @@ typedef void (*ExcpHndlr) (void) ; #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ +#ifdef CONFIG_CPU_MONAHANS +#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */ +/* Missing: 32 Interrupt priority registers + * These are the same as beneath for PXA27x: maybe can be merged if + * GPIO Stuff is same too. + */ +#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ +#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ +#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ +#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ +#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ +/* Missing: 2 Interrupt priority registers */ +#endif /* CONFIG_CPU_MONAHANS */ + /* * General Purpose I/O */ @@ -886,12 +964,287 @@ typedef void (*ExcpHndlr) (void) ; #define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ #define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ +#ifdef CONFIG_CPU_MONAHANS +#define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ +#define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ +#define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ +#define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ +#define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ +#define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ +#define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ + +#define GSDR0 __REG(0x40E00400) /* Bit-wise Set of GPDR[31:0] */ +#define GSDR1 __REG(0x40E00404) /* Bit-wise Set of GPDR[63:32] */ +#define GSDR2 __REG(0x40E00408) /* Bit-wise Set of GPDR[95:64] */ +#define GSDR3 __REG(0x40E0040C) /* Bit-wise Set of GPDR[127:96] */ + +#define GCDR0 __REG(0x40E00420) /* Bit-wise Clear of GPDR[31:0] */ +#define GCDR1 __REG(0x40E00424) /* Bit-wise Clear of GPDR[63:32] */ +#define GCDR2 __REG(0x40E00428) /* Bit-wise Clear of GPDR[95:64] */ +#define GCDR3 __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */ + +#define GSRER0 __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */ +#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */ +#define GSRER2 __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */ +#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */ + +#define GCRER0 __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */ +#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */ +#define GCRER2 __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */ +#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */ + +#define GSFER0 __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */ +#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */ +#define GSFER2 __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */ +#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */ + +#define GCFER0 __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */ +#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */ +#define GCFER2 __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */ +#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */ + +#define GSDR(x) __REG2(0x40E00400, ((x) & 0x60) >> 3) +#define GCDR(x) __REG2(0x40300420, ((x) & 0x60) >> 3) + +/* Multi-funktion Pin Registers, uncomplete, only: + * - GPIO + * - Data Flash DF_* pins defined. + */ +#define GPIO0 __REG(0x40e10124) +#define GPIO1 __REG(0x40e10128) +#define GPIO2 __REG(0x40e1012c) +#define GPIO3 __REG(0x40e10130) +#define GPIO4 __REG(0x40e10134) +#define nXCVREN __REG(0x40e10138) + +#define DF_CLE_NOE __REG(0x40e10204) +#define DF_ALE_WE1 __REG(0x40e10208) + +#define DF_SCLK_E __REG(0x40e10210) +#define nBE0 __REG(0x40e10214) +#define nBE1 __REG(0x40e10218) +#define DF_ALE_WE2 __REG(0x40e1021c) +#define DF_INT_RnB __REG(0x40e10220) +#define DF_nCS0 __REG(0x40e10224) +#define DF_nCS1 __REG(0x40e10228) +#define DF_nWE __REG(0x40e1022c) +#define DF_nRE __REG(0x40e10230) +#define nLUA __REG(0x40e10234) +#define nLLA __REG(0x40e10238) +#define DF_ADDR0 __REG(0x40e1023c) +#define DF_ADDR1 __REG(0x40e10240) +#define DF_ADDR2 __REG(0x40e10244) +#define DF_ADDR3 __REG(0x40e10248) +#define DF_IO0 __REG(0x40e1024c) +#define DF_IO8 __REG(0x40e10250) +#define DF_IO1 __REG(0x40e10254) +#define DF_IO9 __REG(0x40e10258) +#define DF_IO2 __REG(0x40e1025c) +#define DF_IO10 __REG(0x40e10260) +#define DF_IO3 __REG(0x40e10264) +#define DF_IO11 __REG(0x40e10268) +#define DF_IO4 __REG(0x40e1026c) +#define DF_IO12 __REG(0x40e10270) +#define DF_IO5 __REG(0x40e10274) +#define DF_IO13 __REG(0x40e10278) +#define DF_IO6 __REG(0x40e1027c) +#define DF_IO14 __REG(0x40e10280) +#define DF_IO7 __REG(0x40e10284) +#define DF_IO15 __REG(0x40e10288) + +#define GPIO5 __REG(0x40e1028c) +#define GPIO6 __REG(0x40e10290) +#define GPIO7 __REG(0x40e10294) +#define GPIO8 __REG(0x40e10298) +#define GPIO9 __REG(0x40e1029c) + +#define GPIO11 __REG(0x40e102a0) +#define GPIO12 __REG(0x40e102a4) +#define GPIO13 __REG(0x40e102a8) +#define GPIO14 __REG(0x40e102ac) +#define GPIO15 __REG(0x40e102b0) +#define GPIO16 __REG(0x40e102b4) +#define GPIO17 __REG(0x40e102b8) +#define GPIO18 __REG(0x40e102bc) +#define GPIO19 __REG(0x40e102c0) +#define GPIO20 __REG(0x40e102c4) +#define GPIO21 __REG(0x40e102c8) +#define GPIO22 __REG(0x40e102cc) +#define GPIO23 __REG(0x40e102d0) +#define GPIO24 __REG(0x40e102d4) +#define GPIO25 __REG(0x40e102d8) +#define GPIO26 __REG(0x40e102dc) + +#define GPIO27 __REG(0x40e10400) +#define GPIO28 __REG(0x40e10404) +#define GPIO29 __REG(0x40e10408) +#define GPIO30 __REG(0x40e1040c) +#define GPIO31 __REG(0x40e10410) +#define GPIO32 __REG(0x40e10414) +#define GPIO33 __REG(0x40e10418) +#define GPIO34 __REG(0x40e1041c) +#define GPIO35 __REG(0x40e10420) +#define GPIO36 __REG(0x40e10424) +#define GPIO37 __REG(0x40e10428) +#define GPIO38 __REG(0x40e1042c) +#define GPIO39 __REG(0x40e10430) +#define GPIO40 __REG(0x40e10434) +#define GPIO41 __REG(0x40e10438) +#define GPIO42 __REG(0x40e1043c) +#define GPIO43 __REG(0x40e10440) +#define GPIO44 __REG(0x40e10444) +#define GPIO45 __REG(0x40e10448) +#define GPIO46 __REG(0x40e1044c) +#define GPIO47 __REG(0x40e10450) +#define GPIO48 __REG(0x40e10454) + +#define GPIO10 __REG(0x40e10458) + +#define GPIO49 __REG(0x40e1045c) +#define GPIO50 __REG(0x40e10460) +#define GPIO51 __REG(0x40e10464) +#define GPIO52 __REG(0x40e10468) +#define GPIO53 __REG(0x40e1046c) +#define GPIO54 __REG(0x40e10470) +#define GPIO55 __REG(0x40e10474) +#define GPIO56 __REG(0x40e10478) +#define GPIO57 __REG(0x40e1047c) +#define GPIO58 __REG(0x40e10480) +#define GPIO59 __REG(0x40e10484) +#define GPIO60 __REG(0x40e10488) +#define GPIO61 __REG(0x40e1048c) +#define GPIO62 __REG(0x40e10490) + +#define GPIO6_2 __REG(0x40e10494) +#define GPIO7_2 __REG(0x40e10498) +#define GPIO8_2 __REG(0x40e1049c) +#define GPIO9_2 __REG(0x40e104a0) +#define GPIO10_2 __REG(0x40e104a4) +#define GPIO11_2 __REG(0x40e104a8) +#define GPIO12_2 __REG(0x40e104ac) +#define GPIO13_2 __REG(0x40e104b0) + +#define GPIO63 __REG(0x40e104b4) +#define GPIO64 __REG(0x40e104b8) +#define GPIO65 __REG(0x40e104bc) +#define GPIO66 __REG(0x40e104c0) +#define GPIO67 __REG(0x40e104c4) +#define GPIO68 __REG(0x40e104c8) +#define GPIO69 __REG(0x40e104cc) +#define GPIO70 __REG(0x40e104d0) +#define GPIO71 __REG(0x40e104d4) +#define GPIO72 __REG(0x40e104d8) +#define GPIO73 __REG(0x40e104dc) + +#define GPIO14_2 __REG(0x40e104e0) +#define GPIO15_2 __REG(0x40e104e4) +#define GPIO16_2 __REG(0x40e104e8) +#define GPIO17_2 __REG(0x40e104ec) + +#define GPIO74 __REG(0x40e104f0) +#define GPIO75 __REG(0x40e104f4) +#define GPIO76 __REG(0x40e104f8) +#define GPIO77 __REG(0x40e104fc) +#define GPIO78 __REG(0x40e10500) +#define GPIO79 __REG(0x40e10504) +#define GPIO80 __REG(0x40e10508) +#define GPIO81 __REG(0x40e1050c) +#define GPIO82 __REG(0x40e10510) +#define GPIO83 __REG(0x40e10514) +#define GPIO84 __REG(0x40e10518) +#define GPIO85 __REG(0x40e1051c) +#define GPIO86 __REG(0x40e10520) +#define GPIO87 __REG(0x40e10524) +#define GPIO88 __REG(0x40e10528) +#define GPIO89 __REG(0x40e1052c) +#define GPIO90 __REG(0x40e10530) +#define GPIO91 __REG(0x40e10534) +#define GPIO92 __REG(0x40e10538) +#define GPIO93 __REG(0x40e1053c) +#define GPIO94 __REG(0x40e10540) +#define GPIO95 __REG(0x40e10544) +#define GPIO96 __REG(0x40e10548) +#define GPIO97 __REG(0x40e1054c) +#define GPIO98 __REG(0x40e10550) + +#define GPIO99 __REG(0x40e10600) +#define GPIO100 __REG(0x40e10604) +#define GPIO101 __REG(0x40e10608) +#define GPIO102 __REG(0x40e1060c) +#define GPIO103 __REG(0x40e10610) +#define GPIO104 __REG(0x40e10614) +#define GPIO105 __REG(0x40e10618) +#define GPIO106 __REG(0x40e1061c) +#define GPIO107 __REG(0x40e10620) +#define GPIO108 __REG(0x40e10624) +#define GPIO109 __REG(0x40e10628) +#define GPIO110 __REG(0x40e1062c) +#define GPIO111 __REG(0x40e10630) +#define GPIO112 __REG(0x40e10634) + +#define GPIO113 __REG(0x40e10638) +#define GPIO114 __REG(0x40e1063c) +#define GPIO115 __REG(0x40e10640) +#define GPIO116 __REG(0x40e10644) +#define GPIO117 __REG(0x40e10648) +#define GPIO118 __REG(0x40e1064c) +#define GPIO119 __REG(0x40e10650) +#define GPIO120 __REG(0x40e10654) +#define GPIO121 __REG(0x40e10658) +#define GPIO122 __REG(0x40e1065c) +#define GPIO123 __REG(0x40e10660) +#define GPIO124 __REG(0x40e10664) +#define GPIO125 __REG(0x40e10668) +#define GPIO126 __REG(0x40e1066c) +#define GPIO127 __REG(0x40e10670) + +#define GPIO0_2 __REG(0x40e10674) +#define GPIO1_2 __REG(0x40e10678) +#define GPIO2_2 __REG(0x40e1067c) +#define GPIO3_2 __REG(0x40e10680) +#define GPIO4_2 __REG(0x40e10684) +#define GPIO5_2 __REG(0x40e10688) + +/* MFPR Bit Definitions, see 4-10, Vol. 1 */ +#define PULL_SEL 0x8000 +#define PULLUP_EN 0x4000 +#define PULLDOWN_EN 0x2000 + +#define DRIVE_FAST_1mA 0x0 +#define DRIVE_FAST_2mA 0x400 +#define DRIVE_FAST_3mA 0x800 +#define DRIVE_FAST_4mA 0xC00 +#define DRIVE_SLOW_6mA 0x1000 +#define DRIVE_FAST_6mA 0x1400 +#define DRIVE_SLOW_10mA 0x1800 +#define DRIVE_FAST_10mA 0x1C00 + +#define SLEEP_SEL 0x200 +#define SLEEP_DATA 0x100 +#define SLEEP_OE_N 0x80 +#define EDGE_CLEAR 0x40 +#define EDGE_FALL_EN 0x20 +#define EDGE_RISE_EN 0x10 + +#define AF_SEL_0 0x0 /* Alternate function 0 (reset state) */ +#define AF_SEL_1 0x1 /* Alternate function 1 */ +#define AF_SEL_2 0x2 /* Alternate function 2 */ +#define AF_SEL_3 0x3 /* Alternate function 3 */ +#define AF_SEL_4 0x4 /* Alternate function 4 */ +#define AF_SEL_5 0x5 /* Alternate function 5 */ +#define AF_SEL_6 0x6 /* Alternate function 6 */ +#define AF_SEL_7 0x7 /* Alternate function 7 */ + + +#else /* CONFIG_CPU_MONAHANS */ + #define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ #define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ #define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ #define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ #define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ #define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO 80 */ +#endif /* CONFIG_CPU_MONAHANS */ /* More handy macros. The argument is a literal GPIO number. */ @@ -1136,12 +1489,85 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) #define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT) -#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT) +#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT) +#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT) /* * Power Manager */ +#ifdef CONFIG_CPU_MONAHANS + +#define ASCR __REG(0x40F40000) /* Application Subsystem Power Status/Control Register */ +#define ARSR __REG(0x40F40004) /* Application Subsystem Reset Status Register */ +#define AD3ER __REG(0x40F40008) /* Application Subsystem D3 state Wakeup Enable Register */ +#define AD3SR __REG(0x40F4000C) /* Application Subsystem D3 state Wakeup Status Register */ +#define AD2D0ER __REG(0x40F40010) /* Application Subsystem D2 to D0 state Wakeup Enable Register */ +#define AD2D0SR __REG(0x40F40014) /* Application Subsystem D2 to D0 state Wakeup Status Register */ +#define AD2D1ER __REG(0x40F40018) /* Application Subsystem D2 to D1 state Wakeup Enable Register */ +#define AD2D1SR __REG(0x40F4001C) /* Application Subsystem D2 to D1 state Wakeup Status Register */ +#define AD1D0ER __REG(0x40F40020) /* Application Subsystem D1 to D0 state Wakeup Enable Register */ +#define AD1D0SR __REG(0x40F40024) /* Application Subsystem D1 to D0 state Wakeup Status Register */ +#define ASDCNT __REG(0x40F40028) /* Application Subsystem SRAM Drowsy Count Register */ +#define AD3R __REG(0x40F40030) /* Application Subsystem D3 State Configuration Register */ +#define AD2R __REG(0x40F40034) /* Application Subsystem D2 State Configuration Register */ +#define AD1R __REG(0x40F40038) /* Application Subsystem D1 State Configuration Register */ + +#define PMCR __REG(0x40F50000) /* Power Manager Control Register */ +#define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */ +#define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */ +#define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */ +#define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */ +#define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */ +#define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */ +#define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */ +#define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */ +#define PCMD(x) __REG(0x40F50110 + x*4) +#define PCMD0 __REG(0x40F50110 + 0 * 4) +#define PCMD1 __REG(0x40F50110 + 1 * 4) +#define PCMD2 __REG(0x40F50110 + 2 * 4) +#define PCMD3 __REG(0x40F50110 + 3 * 4) +#define PCMD4 __REG(0x40F50110 + 4 * 4) +#define PCMD5 __REG(0x40F50110 + 5 * 4) +#define PCMD6 __REG(0x40F50110 + 6 * 4) +#define PCMD7 __REG(0x40F50110 + 7 * 4) +#define PCMD8 __REG(0x40F50110 + 8 * 4) +#define PCMD9 __REG(0x40F50110 + 9 * 4) +#define PCMD10 __REG(0x40F50110 + 10 * 4) +#define PCMD11 __REG(0x40F50110 + 11 * 4) +#define PCMD12 __REG(0x40F50110 + 12 * 4) +#define PCMD13 __REG(0x40F50110 + 13 * 4) +#define PCMD14 __REG(0x40F50110 + 14 * 4) +#define PCMD15 __REG(0x40F50110 + 15 * 4) +#define PCMD16 __REG(0x40F50110 + 16 * 4) +#define PCMD17 __REG(0x40F50110 + 17 * 4) +#define PCMD18 __REG(0x40F50110 + 18 * 4) +#define PCMD19 __REG(0x40F50110 + 19 * 4) +#define PCMD20 __REG(0x40F50110 + 20 * 4) +#define PCMD21 __REG(0x40F50110 + 21 * 4) +#define PCMD22 __REG(0x40F50110 + 22 * 4) +#define PCMD23 __REG(0x40F50110 + 23 * 4) +#define PCMD24 __REG(0x40F50110 + 24 * 4) +#define PCMD25 __REG(0x40F50110 + 25 * 4) +#define PCMD26 __REG(0x40F50110 + 26 * 4) +#define PCMD27 __REG(0x40F50110 + 27 * 4) +#define PCMD28 __REG(0x40F50110 + 28 * 4) +#define PCMD29 __REG(0x40F50110 + 29 * 4) +#define PCMD30 __REG(0x40F50110 + 30 * 4) +#define PCMD31 __REG(0x40F50110 + 31 * 4) + +#define PCMD_MBC (1<<12) +#define PCMD_DCE (1<<11) +#define PCMD_LC (1<<10) +#define PCMD_SQC (3<<8) /* only 00 and 01 are valid */ + +#define PVCR_FVC (0x1 << 28) +#define PVCR_VCSA (0x1<<14) +#define PVCR_CommandDelay (0xf80) +#define PVCR_ReadPointer (0x01f00000) +#define PVCR_SlaveAddress (0x7f) + +#else /* ifdef CONFIG_CPU_MONAHANS */ + #define PMCR __REG(0x40F00000) /* Power Manager Control Register */ #define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ #define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ @@ -1225,6 +1651,8 @@ typedef void (*ExcpHndlr) (void) ; #define RCSR_WDR (1 << 1) /* Watchdog Reset */ #define RCSR_HWR (1 << 0) /* Hardware Reset */ +#endif /* CONFIG_CPU_MONAHANS */ + /* * SSP Serial Port Registers */ @@ -1259,6 +1687,67 @@ typedef void (*ExcpHndlr) (void) ; /* * Core Clock */ + +#if defined(CONFIG_CPU_MONAHANS) +#define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ +#define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ +#define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ +#define CKENA __REG(0x4134000C) /* A Clock Enable Register */ +#define CKENB __REG(0x41340010) /* B Clock Enable Register */ +#define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ + +#define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */ +#define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */ +#define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */ +#define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */ +#define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */ +#define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ +#define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */ +#define ACCR_XPDIS (1 << 31) +#define ACCR_SPDIS (1 << 30) +#define ACCR_13MEND1 (1 << 27) +#define ACCR_D0CS (1 << 26) +#define ACCR_13MEND2 (1 << 21) +#define ACCR_PCCE (1 << 11) + +#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */ +#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */ +#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */ +#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */ +#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */ +#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */ +#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */ +#define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */ +#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */ +#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */ +#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */ +#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */ +#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */ +#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */ +#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */ +#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */ +#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */ +#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */ +#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */ +#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */ +#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */ +#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */ +#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */ +#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */ +#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */ +#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */ +#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ +#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ + +#define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */ +#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */ +#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */ +#define CKENB_4_I2C ((1 << 4) + 32) /* I2C Unit Clock Enable */ +#define CKENB_1_PWM1 ((1 << 1) + 32) /* PWM2 & PWM3 Clock Enable */ +#define CKENB_0_PWM0 ((1 << 0) + 32) /* PWM0 & PWM1 Clock Enable */ + +#else /* if defined CONFIG_CPU_MONAHANS */ + #define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ #define CKEN __REG(0x41300004) /* Clock Enable Register */ #define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ @@ -1318,6 +1807,8 @@ typedef void (*ExcpHndlr) (void) ; #define CCCR_N30 (0x6 << 7) #endif +#endif /* CONFIG_CPU_MONAHANS */ + /* * LCD */ @@ -1502,6 +1993,163 @@ typedef void (*ExcpHndlr) (void) ; /* * Memory controller */ + +#ifdef CONFIG_CPU_MONAHANS +/* Static Memory Controller Registers */ +#define MSC0 __REG_2(0x4A000008) /* Static Memory Control Register 0 */ +#define MSC1 __REG_2(0x4A00000C) /* Static Memory Control Register 1 */ +#define MECR __REG_2(0x4A000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ +#define SXCNFG __REG_2(0x4A00001C) /* Synchronous Static Memory Control Register */ +#define MCMEM0 __REG_2(0x4A000028) /* Card interface Common Memory Space Socket 0 Timing */ +#define MCATT0 __REG_2(0x4A000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ +#define MCIO0 __REG_2(0x4A000038) /* Card interface I/O Space Socket 0 Timing Configuration */ +#define MEMCLKCFG __REG_2(0x4A000068) /* SCLK speed configuration */ +#define CSADRCFG0 __REG_2(0x4A000080) /* Address Configuration for chip select 0 */ +#define CSADRCFG1 __REG_2(0x4A000084) /* Address Configuration for chip select 1 */ +#define CSADRCFG2 __REG_2(0x4A000088) /* Address Configuration for chip select 2 */ +#define CSADRCFG3 __REG_2(0x4A00008C) /* Address Configuration for chip select 3 */ +#define CSADRCFG_P __REG_2(0x4A000090) /* Address Configuration for pcmcia card interface */ +#define CSMSADRCFG __REG_2(0x4A0000A0) /* Master Address Configuration Register */ +#define CLK_RET_DEL __REG_2(0x4A0000B0) /* Delay line and mux selects for return data latching for sync. flash */ +#define ADV_RET_DEL __REG_2(0x4A0000B4) /* Delay line and mux selects for return data latching for sync. flash */ + +/* Dynamic Memory Controller Registers */ +#define MDCNFG __REG_2(0x48100000) /* SDRAM Configuration Register 0 */ +#define MDREFR __REG_2(0x48100004) /* SDRAM Refresh Control Register */ +#define FLYCNFG __REG_2(0x48100020) /* Fly-by DMA DVAL[1:0] polarities */ +#define MDMRS __REG_2(0x48100040) /* MRS value to be written to SDRAM */ +#define DDR_SCAL __REG_2(0x48100050) /* Software Delay Line Calibration/Configuration for external DDR memory. */ +#define DDR_HCAL __REG_2(0x48100060) /* Hardware Delay Line Calibration/Configuration for external DDR memory. */ +#define DDR_WCAL __REG_2(0x48100068) /* DDR Write Strobe Calibration Register */ +#define DMCIER __REG_2(0x48100070) /* Dynamic MC Interrupt Enable Register. */ +#define DMCISR __REG_2(0x48100078) /* Dynamic MC Interrupt Status Register. */ +#define DDR_DLS __REG_2(0x48100080) /* DDR Delay Line Value Status register for external DDR memory. */ +#define EMPI __REG_2(0x48100090) /* EMPI Control Register */ +#define RCOMP __REG_2(0x48100100) +#define PAD_MA __REG_2(0x48100110) +#define PAD_MDMSB __REG_2(0x48100114) +#define PAD_MDLSB __REG_2(0x48100118) +#define PAD_DMEM __REG_2(0x4810011c) +#define PAD_SDCLK __REG_2(0x48100120) +#define PAD_SDCS __REG_2(0x48100124) +#define PAD_SMEM __REG_2(0x48100128) +#define PAD_SCLK __REG_2(0x4810012C) +#define TAI __REG_2(0x48100F00) /* TAI Tavor Address Isolation Register */ + +/* Some frequently used bits */ +#define MDCNFG_DMAP 0x80000000 /* SDRAM 1GB Memory Map Enable */ +#define MDCNFG_DMCEN 0x40000000 /* Enable Dynamic Memory Controller */ +#define MDCNFG_HWFREQ 0x20000000 /* Hardware Frequency Change Calibration */ +#define MDCNFG_DTYPE 0x400 /* SDRAM Type: 1=DDR SDRAM */ + +#define MDCNFG_DTC_0 0x0 /* Timing Category of SDRAM */ +#define MDCNFG_DTC_1 0x100 +#define MDCNFG_DTC_2 0x200 +#define MDCNFG_DTC_3 0x300 + +#define MDCNFG_DRAC_12 0x0 /* Number of Row Access Bits */ +#define MDCNFG_DRAC_13 0x20 +#define MDCNFG_DRAC_14 0x40 + +#define MDCNFG_DCAC_9 0x0 /* Number of Column Acess Bits */ +#define MDCNFG_DCAC_10 0x08 +#define MDCNFG_DCAC_11 0x10 + +#define MDCNFG_DBW_16 0x4 /* SDRAM Data Bus width 16bit */ +#define MDCNFG_DCSE1 0x2 /* SDRAM CS 1 Enable */ +#define MDCNFG_DCSE0 0x1 /* SDRAM CS 0 Enable */ + + +/* Data Flash Controller Registers */ + +#define NDCR __REG(0x43100000) /* Data Flash Control register */ +#define NDTR0CS0 __REG(0x43100004) /* Data Controller Timing Parameter 0 Register for ND_nCS0 */ +/* #define NDTR0CS1 __REG(0x43100008) /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */ +#define NDTR1CS0 __REG(0x4310000C) /* Data Controller Timing Parameter 1 Register for ND_nCS0 */ +/* #define NDTR1CS1 __REG(0x43100010) /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */ +#define NDSR __REG(0x43100014) /* Data Controller Status Register */ +#define NDPCR __REG(0x43100018) /* Data Controller Page Count Register */ +#define NDBDR0 __REG(0x4310001C) /* Data Controller Bad Block Register 0 */ +#define NDBDR1 __REG(0x43100020) /* Data Controller Bad Block Register 1 */ +#define NDDB __REG(0x43100040) /* Data Controller Data Buffer */ +#define NDCB0 __REG(0x43100048) /* Data Controller Command Buffer0 */ +#define NDCB1 __REG(0x4310004C) /* Data Controller Command Buffer1 */ +#define NDCB2 __REG(0x43100050) /* Data Controller Command Buffer2 */ + +#define NDCR_SPARE_EN (0x1<<31) +#define NDCR_ECC_EN (0x1<<30) +#define NDCR_DMA_EN (0x1<<29) +#define NDCR_ND_RUN (0x1<<28) +#define NDCR_DWIDTH_C (0x1<<27) +#define NDCR_DWIDTH_M (0x1<<26) +#define NDCR_PAGE_SZ (0x3<<24) +#define NDCR_NCSX (0x1<<23) +#define NDCR_ND_STOP (0x1<<22) +/* reserved: + * #define NDCR_ND_MODE (0x3<<21) + * #define NDCR_NAND_MODE 0x0 */ +#define NDCR_CLR_PG_CNT (0x1<<20) +#define NDCR_CLR_ECC (0x1<<19) +#define NDCR_RD_ID_CNT (0x7<<16) +#define NDCR_RA_START (0x1<<15) +#define NDCR_PG_PER_BLK (0x1<<14) +#define NDCR_ND_ARB_EN (0x1<<12) +#define NDCR_RDYM (0x1<<11) +#define NDCR_CS0_PAGEDM (0x1<<10) +#define NDCR_CS1_PAGEDM (0x1<<9) +#define NDCR_CS0_CMDDM (0x1<<8) +#define NDCR_CS1_CMDDM (0x1<<7) +#define NDCR_CS0_BBDM (0x1<<6) +#define NDCR_CS1_BBDM (0x1<<5) +#define NDCR_DBERRM (0x1<<4) +#define NDCR_SBERRM (0x1<<3) +#define NDCR_WRDREQM (0x1<<2) +#define NDCR_RDDREQM (0x1<<1) +#define NDCR_WRCMDREQM (0x1) + +#define NDSR_RDY (0x1<<11) +#define NDSR_CS0_PAGED (0x1<<10) +#define NDSR_CS1_PAGED (0x1<<9) +#define NDSR_CS0_CMDD (0x1<<8) +#define NDSR_CS1_CMDD (0x1<<7) +#define NDSR_CS0_BBD (0x1<<6) +#define NDSR_CS1_BBD (0x1<<5) +#define NDSR_DBERR (0x1<<4) +#define NDSR_SBERR (0x1<<3) +#define NDSR_WRDREQ (0x1<<2) +#define NDSR_RDDREQ (0x1<<1) +#define NDSR_WRCMDREQ (0x1) + +#define NDCB0_AUTO_RS (0x1<<25) +#define NDCB0_CSEL (0x1<<24) +#define NDCB0_CMD_TYPE (0x7<<21) +#define NDCB0_NC (0x1<<20) +#define NDCB0_DBC (0x1<<19) +#define NDCB0_ADDR_CYC (0x7<<16) +#define NDCB0_CMD2 (0xff<<8) +#define NDCB0_CMD1 (0xff) +#define MCMEM(s) MCMEM0 +#define MCATT(s) MCATT0 +#define MCIO(s) MCIO0 +#define MECR_CIT (1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */ + +/* Maximum values for NAND Interface Timing Registers in DFC clock + * periods */ +#define DFC_MAX_tCH 7 +#define DFC_MAX_tCS 7 +#define DFC_MAX_tWH 7 +#define DFC_MAX_tWP 7 +#define DFC_MAX_tRH 7 +#define DFC_MAX_tRP 15 +#define DFC_MAX_tR 65535 +#define DFC_MAX_tWHR 15 +#define DFC_MAX_tAR 15 + +#define DFC_CLOCK 104 /* DFC Clock is 104 MHz */ +#define DFC_CLK_PER_US DFC_CLOCK/1000 /* clock period in ns */ + +#else /* CONFIG_CPU_MONAHANS */ + #define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */ #define MDCNFG_OFFSET 0x0 #define MDREFR_OFFSET 0x4 @@ -1573,6 +2221,8 @@ typedef void (*ExcpHndlr) (void) ; #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ +#endif /* CONFIG_CPU_MONAHANS */ + /* Interrupt Controller */ #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ @@ -1733,16 +2383,16 @@ typedef void (*ExcpHndlr) (void) ; #define KPAS_SO (0x1 << 31) #define KPASMKPx_SO (0x1 << 31) -#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ -#define PSLR __REG(0x40F00034) -#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */ -#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */ -#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */ -#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */ -#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */ -#define OSMR4 __REG(0x40A00080) /* */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ +#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ +#define PSLR __REG(0x40F00034) +#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */ +#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */ +#define OSMR4 __REG(0x40A00080) /* */ +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 __REG(0x40A000C0) /* */ #endif /* CONFIG_PXA27X */ diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index c2b69fb2dd9..648a10dd923 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -58,6 +58,14 @@ extern void __raw_readsl(unsigned int addr, void *data, int longlen); #define __raw_readw(a) __arch_getw(a) #define __raw_readl(a) __arch_getl(a) +#define writeb(v,a) __arch_putb(v,a) +#define writew(v,a) __arch_putw(v,a) +#define writel(v,a) __arch_putl(v,a) + +#define readb(a) __arch_getb(a) +#define readw(a) __arch_getw(a) +#define readl(a) __arch_getl(a) + /* * The compiler seems to be incapable of optimising constants * properly. Spell it out to the compiler in some cases. diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h index fd037485235..428552e22c4 100644 --- a/include/asm-arm/mach-types.h +++ b/include/asm-arm/mach-types.h @@ -736,6 +736,9 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_LN2410SBC 725 #define MACH_TYPE_CB3RUFC 726 #define MACH_TYPE_MP2USB 727 +#define MACH_TYPE_OMAP_2430SDP 900 +#define MACH_TYPE_PDNB3 1002 +#define MACH_TYPE_OMAP_3430SDP 1138 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -6821,6 +6824,30 @@ extern unsigned int __machine_arch_type; # define machine_is_omap_h4() (0) #endif +#ifdef CONFIG_MACH_OMAP_2430SDP +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP_2430SDP +# endif +# define machine_is_omap_2430SDP() (machine_arch_type == MACH_TYPE_OMAP_2430SDP) +#else +# define machine_is_omap_2430SDP() (0) +#endif + +#ifdef CONFIG_MACH_OMAP_3430SDP +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP_3430SDP +# endif +# define machine_is_omap_3430SDP() (machine_arch_type == MACH_TYPE_OMAP_3430SDP) +#else +# define machine_is_omap_3430SDP() (0) +#endif + #ifdef CONFIG_MACH_N10 # ifdef machine_arch_type # undef machine_arch_type diff --git a/include/asm-arm/u-boot.h b/include/asm-arm/u-boot.h index 146934cf0cb..c120312e0aa 100644 --- a/include/asm-arm/u-boot.h +++ b/include/asm-arm/u-boot.h @@ -48,6 +48,10 @@ typedef struct bd_info { ulong start; ulong size; } bi_dram[CONFIG_NR_DRAM_BANKS]; +#ifdef CONFIG_HAS_ETH1 + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#endif } bd_t; #define bi_env_data bi_env->data diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h new file mode 100644 index 00000000000..65d2c253457 --- /dev/null +++ b/include/asm-blackfin/bitops.h @@ -0,0 +1,380 @@ +/* + * U-boot - bitops.h Routines for bit operations + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_BITOPS_H +#define _BLACKFIN_BITOPS_H + +/* + * Copyright 1992, Linus Torvalds. + */ + +#include <linux/config.h> +#include <asm/byteorder.h> +#include <asm/system.h> + +#ifdef __KERNEL__ +/* + * Function prototypes to keep gcc -Wall happy + */ + +/* + * The __ functions are not atomic + */ + +/* + * ffz = Find First Zero in word. Undefined if no zero exists, + * so code should check against ~0UL first.. + */ +static __inline__ unsigned long ffz(unsigned long word) +{ + unsigned long result = 0; + + while (word & 1) { + result++; + word >>= 1; + } + return result; +} + +static __inline__ void set_bit(int nr, volatile void *addr) +{ + int *a = (int *) addr; + int mask; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + save_and_cli(flags); + *a |= mask; + restore_flags(flags); +} + +static __inline__ void __set_bit(int nr, volatile void *addr) +{ + int *a = (int *) addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a |= mask; +} + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +static __inline__ void clear_bit(int nr, volatile void *addr) +{ + int *a = (int *) addr; + int mask; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + save_and_cli(flags); + *a &= ~mask; + restore_flags(flags); +} + +static __inline__ void change_bit(int nr, volatile void *addr) +{ + int mask, flags; + unsigned long *ADDR = (unsigned long *) addr; + + ADDR += nr >> 5; + mask = 1 << (nr & 31); + save_and_cli(flags); + *ADDR ^= mask; + restore_flags(flags); +} + +static __inline__ void __change_bit(int nr, volatile void *addr) +{ + int mask; + unsigned long *ADDR = (unsigned long *) addr; + + ADDR += nr >> 5; + mask = 1 << (nr & 31); + *ADDR ^= mask; +} + +static __inline__ int test_and_set_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + save_and_cli(flags); + retval = (mask & *a) != 0; + *a |= mask; + restore_flags(flags); + + return retval; +} + +static __inline__ int __test_and_set_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a |= mask; + return retval; +} + +static __inline__ int test_and_clear_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + save_and_cli(flags); + retval = (mask & *a) != 0; + *a &= ~mask; + restore_flags(flags); + + return retval; +} + +static __inline__ int __test_and_clear_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a &= ~mask; + return retval; +} + +static __inline__ int test_and_change_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + save_and_cli(flags); + retval = (mask & *a) != 0; + *a ^= mask; + restore_flags(flags); + + return retval; +} + +static __inline__ int __test_and_change_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = (volatile unsigned int *) addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + retval = (mask & *a) != 0; + *a ^= mask; + return retval; +} + +/* + * This routine doesn't need to be atomic. + */ +static __inline__ int __constant_test_bit(int nr, + const volatile void *addr) +{ + return ((1UL << (nr & 31)) & + (((const volatile unsigned int *) addr)[nr >> 5])) != 0; +} + +static __inline__ int __test_bit(int nr, volatile void *addr) +{ + int *a = (int *) addr; + int mask; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + return ((mask & *a) != 0); +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + __constant_test_bit((nr),(addr)) : \ + __test_bit((nr),(addr))) + +#define find_first_zero_bit(addr, size) \ + find_next_zero_bit((addr), (size), 0) + +static __inline__ int find_next_zero_bit(void *addr, int size, int offset) +{ + unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if (offset) { + tmp = *(p++); + tmp |= ~0UL >> (32 - offset); + if (size < 32) + goto found_first; + if (~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while (size & ~31UL) { + if (~(tmp = *(p++))) + goto found_middle; + result += 32; + size -= 32; + } + if (!size) + return result; + tmp = *p; + + found_first: + tmp |= ~0UL >> size; + found_middle: + return result + ffz(tmp); +} + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ + +#define ffs(x) generic_ffs(x) + +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ + +#define hweight32(x) generic_hweight32(x) +#define hweight16(x) generic_hweight16(x) +#define hweight8(x) generic_hweight8(x) + +static __inline__ int ext2_set_bit(int nr, volatile void *addr) +{ + int mask, retval; + unsigned long flags; + volatile unsigned char *ADDR = (unsigned char *) addr; + + ADDR += nr >> 3; + mask = 1 << (nr & 0x07); + save_and_cli(flags); + retval = (mask & *ADDR) != 0; + *ADDR |= mask; + restore_flags(flags); + return retval; +} + +static __inline__ int ext2_clear_bit(int nr, volatile void *addr) +{ + int mask, retval; + unsigned long flags; + volatile unsigned char *ADDR = (unsigned char *) addr; + + ADDR += nr >> 3; + mask = 1 << (nr & 0x07); + save_and_cli(flags); + retval = (mask & *ADDR) != 0; + *ADDR &= ~mask; + restore_flags(flags); + return retval; +} + +static __inline__ int ext2_test_bit(int nr, const volatile void *addr) +{ + int mask; + const volatile unsigned char *ADDR = (const unsigned char *) addr; + + ADDR += nr >> 3; + mask = 1 << (nr & 0x07); + return ((mask & *ADDR) != 0); +} + +#define ext2_find_first_zero_bit(addr, size) \ + ext2_find_next_zero_bit((addr), (size), 0) + +static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, + unsigned long size, + unsigned long + offset) +{ + unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if (offset) { + tmp = *(p++); + tmp |= ~0UL >> (32 - offset); + if (size < 32) + goto found_first; + if (~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while (size & ~31UL) { + if (~(tmp = *(p++))) + goto found_middle; + result += 32; + size -= 32; + } + if (!size) + return result; + tmp = *p; + + found_first: + tmp |= ~0UL >> size; + found_middle: + return result + ffz(tmp); +} + +/* Bitmap functions for the minix filesystem. */ +#define minix_test_and_set_bit(nr,addr) test_and_set_bit(nr,addr) +#define minix_set_bit(nr,addr) set_bit(nr,addr) +#define minix_test_and_clear_bit(nr,addr) test_and_clear_bit(nr,addr) +#define minix_test_bit(nr,addr) test_bit(nr,addr) +#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size) + +#endif + +#endif diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h new file mode 100644 index 00000000000..fbdbf30fa12 --- /dev/null +++ b/include/asm-blackfin/blackfin.h @@ -0,0 +1,46 @@ +/* + * U-boot - blackfin.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_H_ +#define _BLACKFIN_H_ + +#include <asm/cpu/defBF533.h> +#include <asm/cpu/bf533_serial.h> + +#ifndef __ASSEMBLY__ +#ifndef ASSEMBLY + +#ifdef SHARED_RESOURCES + #include <asm/shared_resources.h> +#endif +#include <asm/cpu/cdefBF53x.h> + +#endif +#endif + +#include <asm/cpu/defBF533.h> +#include <asm/cpu/defBF533_extn.h> +#include <asm/cpu/bf533_serial.h> + +#endif diff --git a/include/asm-blackfin/blackfin_defs.h b/include/asm-blackfin/blackfin_defs.h new file mode 100644 index 00000000000..21902159716 --- /dev/null +++ b/include/asm-blackfin/blackfin_defs.h @@ -0,0 +1,83 @@ +/* + * U-boot - blackfin_defs.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BLACKFIN_DEFS_H__ +#define __BLACKFIN_DEFS_H__ + +#define TS_MAGICKEY 0x5a5a5a5a +#define TASK_STATE 0 +#define TASK_FLAGS 4 +#define TASK_PTRACE 24 +#define TASK_BLOCKED 636 +#define TASK_COUNTER 32 +#define TASK_SIGPENDING 8 +#define TASK_NEEDRESCHED 20 +#define TASK_THREAD 600 +#define TASK_MM 44 +#define TASK_ACTIVE_MM 80 +#define THREAD_KSP 0 +#define THREAD_USP 4 +#define THREAD_SR 8 +#define THREAD_ESP0 12 +#define THREAD_PC 16 +#define PT_ORIG_R0 208 +#define PT_R0 204 +#define PT_R1 200 +#define PT_R2 196 +#define PT_R3 192 +#define PT_R4 188 +#define PT_R5 184 +#define PT_R6 180 +#define PT_R7 176 +#define PT_P0 172 +#define PT_P1 168 +#define PT_P2 164 +#define PT_P3 160 +#define PT_P4 156 +#define PT_P5 152 +#define PT_A0w 72 +#define PT_A1w 64 +#define PT_A0x 76 +#define PT_A1x 68 +#define PT_RETS 28 +#define PT_RESERVED 32 +#define PT_ASTAT 36 +#define PT_SEQSTAT 8 +#define PT_PC 24 +#define PT_IPEND 0 +#define PT_USP 144 +#define PT_FP 148 +#define PT_SYSCFG 4 +#define IRQ_HANDLER 0 +#define IRQ_DEVID 8 +#define IRQ_NEXT 16 +#define STAT_IRQ 5148 +#define SIGSEGV 11 +#define SEGV_MAPERR 196609 +#define SIGTRAP 5 +#define PT_PTRACED 1 +#define PT_TRACESYS 2 +#define PT_DTRACE 4 + +#endif diff --git a/include/asm-blackfin/byteorder.h b/include/asm-blackfin/byteorder.h new file mode 100644 index 00000000000..3b4df4e1344 --- /dev/null +++ b/include/asm-blackfin/byteorder.h @@ -0,0 +1,40 @@ +/* + * U-boot - byteorder.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_BYTEORDER_H +#define _BLACKFIN_BYTEORDER_H + +#include <asm/types.h> + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#include <linux/byteorder/little_endian.h> + +#endif diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h new file mode 100644 index 00000000000..7715f645deb --- /dev/null +++ b/include/asm-blackfin/cplb.h @@ -0,0 +1,48 @@ +/************************************************************************ + * + * cplb.h + * + * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. + * + ************************************************************************/ + +/* Defines necessary for cplb initialisation routines. */ + +#ifndef _CPLB_H +#define _CPLB_H + +#define CPLB_ENABLE_ICACHE_P 0 +#define CPLB_ENABLE_DCACHE_P 1 +#define CPLB_ENABLE_DCACHE2_P 2 +#define CPLB_ENABLE_CPLBS_P 3 /* Deprecated!*/ +#define CPLB_ENABLE_ICPLBS_P 4 +#define CPLB_ENABLE_DCPLBS_P 5 + +#define CPLB_ENABLE_ICACHE (1<<CPLB_ENABLE_ICACHE_P) +#define CPLB_ENABLE_DCACHE (1<<CPLB_ENABLE_DCACHE_P) +#define CPLB_ENABLE_DCACHE2 (1<<CPLB_ENABLE_DCACHE2_P) +#define CPLB_ENABLE_CPLBS (1<<CPLB_ENABLE_CPLBS_P) +#define CPLB_ENABLE_ICPLBS (1<<CPLB_ENABLE_ICPLBS_P) +#define CPLB_ENABLE_DCPLBS (1<<CPLB_ENABLE_DCPLBS_P) +#define CPLB_ENABLE_ANY_CPLBS CPLB_ENABLE_CPLBS | \ + CPLB_ENABLE_ICPLBS | \ + CPLB_ENABLE_DCPLBS + +#define CPLB_RELOADED 0x0000 +#define CPLB_NO_UNLOCKED 0x0001 +#define CPLB_NO_ADDR_MATCH 0x0002 +#define CPLB_PROT_VIOL 0x0003 + +#define CPLB_DEF_CACHE CPLB_L1_CHBL | CPLB_WT +#define CPLB_CACHE_ENABLED CPLB_L1_CHBL | CPLB_DIRTY + +#define CPLB_ALL_ACCESS CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR + +#define CPLB_I_PAGE_MGMT CPLB_LOCK | CPLB_VALID +#define CPLB_D_PAGE_MGMT CPLB_LOCK | CPLB_ALL_ACCESS | CPLB_VALID +#define CPLB_DNOCACHE CPLB_ALL_ACCESS | CPLB_VALID +#define CPLB_DDOCACHE CPLB_DNOCACHE | CPLB_DEF_CACHE +#define CPLB_INOCACHE CPLB_USER_RD | CPLB_VALID +#define CPLB_IDOCACHE CPLB_INOCACHE | CPLB_L1_CHBL + +#endif /* _CPLB_H */ diff --git a/include/asm-blackfin/cplbtab.h b/include/asm-blackfin/cplbtab.h new file mode 100644 index 00000000000..ab7d989b1a0 --- /dev/null +++ b/include/asm-blackfin/cplbtab.h @@ -0,0 +1,572 @@ +/*This file is subject to the terms and conditions of the GNU General Public + * License. + * + * Blackfin BF533/2.6 support : LG Soft India + * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd + * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's + * shouldn't be victimized. cplbmgr.S search logic is corrected + * to findout the appropriate victim. + * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC + * : LG Soft India + */ +#include <config.h> + +#ifndef __ARCH_BFINNOMMU_CPLBTAB_H +#define __ARCH_BFINNOMMU_CPLBTAB_H + +/************************************************************************* + * ICPLB TABLE + *************************************************************************/ + +.data + +/* This table is configurable */ + +.align 4; + +/* Data Attibutes*/ + +#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) +#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ + #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) + #define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_EBIU (PAGE_SIZE_1MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) + +#else /*Write Through*/ + #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) + #define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) + #define SDRAM_EBIU (PAGE_SIZE_1MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) +#endif + +.global icplb_table +icplb_table: +.byte4 0xFFA00000; +.byte4 (L1_IMEMORY); +.byte4 0x00000000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ +.byte4 0x00400000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ +.byte4 0x07C00000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page14*/ +.byte4 0x00800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ +.byte4 0x00C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ +.byte4 0x01000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page4*/ +.byte4 0x01400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page5*/ +.byte4 0x01800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page6*/ +.byte4 0x01C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page7*/ +#ifndef CONFIG_EZKIT /*STAMP Memory regions*/ +.byte4 0x02000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page8*/ +.byte4 0x02400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page9*/ +.byte4 0x02800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page10*/ +.byte4 0x02C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page11*/ +.byte4 0x03000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page12*/ +.byte4 0x03400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page13*/ +#endif +.byte4 0xffffffff; /* end of section - termination*/ + +.align 4; +.global ipdt_table +ipdt_table: +#ifdef CONFIG_CPLB_INFO +.byte4 0x00000000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page0*/ +.byte4 0x00400000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ +#endif +.byte4 0x00800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ +.byte4 0x00C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page3*/ +.byte4 0x01000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page4*/ +.byte4 0x01400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page5*/ +.byte4 0x01800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page6*/ +.byte4 0x01C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page7*/ +#ifndef CONFIG_EZKIT /*STAMP Memory regions*/ +.byte4 0x02000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page8*/ +.byte4 0x02400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page9*/ +.byte4 0x02800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page10*/ +.byte4 0x02C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page11*/ +.byte4 0x03000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page12*/ +.byte4 0x03400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page13*/ +.byte4 0x03800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page14*/ +.byte4 0x03C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page15*/ +#endif +.byte4 0x20200000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 2 (Secnd)*/ +.byte4 0x20100000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 1 (Prim B)*/ +.byte4 0x20000000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 0 (Prim A)*/ +.byte4 0x20300000; /*Fix for Network*/ +.byte4 (SDRAM_EBIU); /*Async Memory bank 3*/ + +#ifdef CONFIG_STAMP +.byte4 0x04000000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x04400000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x04800000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x04C00000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x05000000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x05400000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x05800000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x05C00000; +.byte4 (SDRAM_IGENERIC); +.byte4 0x06000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page25*/ +.byte4 0x06400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page26*/ +.byte4 0x06800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page27*/ +.byte4 0x06C00000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page28*/ +.byte4 0x07000000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page29*/ +.byte4 0x07400000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page30*/ +.byte4 0x07800000; +.byte4 (SDRAM_IGENERIC); /*SDRAM_Page31*/ +#ifdef CONFIG_CPLB_INFO +.byte4 0x07C00000; +.byte4 (SDRAM_IKERNEL); /*SDRAM_Page32*/ +#endif +#endif +.byte4 0xffffffff; /* end of section - termination*/ + +/********************************************************************* + * DCPLB TABLE + ********************************************************************/ + +.global dcplb_table +dcplb_table: +.byte4 0x00000000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ +.byte4 0x00400000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ +.byte4 0x07C00000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page15*/ +.byte4 0x00800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page2*/ +.byte4 0x00C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page3*/ +.byte4 0x01000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page4*/ +.byte4 0x01400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page5*/ +.byte4 0x01800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page6*/ +.byte4 0x01C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page7*/ +#ifndef CONFIG_EZKIT +.byte4 0x02000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page8*/ +.byte4 0x02400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page9*/ +.byte4 0x02800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page10*/ +.byte4 0x02C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page11*/ +.byte4 0x03000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page12*/ +.byte4 0x03400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page13*/ +.byte4 0x03800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page14*/ +#endif +.byte4 0xffffffff; /*end of section - termination*/ + +/********************************************************************** + * PAGE DESCRIPTOR TABLE + * + **********************************************************************/ + +/* Till here we are discussing about the static memory management model. + * However, the operating envoronments commonly define more CPLB + * descriptors to cover the entire addressable memory than will fit into + * the available on-chip 16 CPLB MMRs. When this happens, the below table + * will be used which will hold all the potentially required CPLB descriptors + * + * This is how Page descriptor Table is implemented in uClinux/Blackfin. + */ +.global dpdt_table +dpdt_table: +#ifdef CONFIG_CPLB_INFO +.byte4 0x00000000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page0*/ +.byte4 0x00400000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ +#endif +.byte4 0x00800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page2*/ +.byte4 0x00C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page3*/ +.byte4 0x01000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page4*/ +.byte4 0x01400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page5*/ +.byte4 0x01800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page6*/ +.byte4 0x01C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page7*/ + +#ifndef CONFIG_EZKIT +.byte4 0x02000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page8*/ +.byte4 0x02400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page9*/ +.byte4 0x02800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page10*/ +.byte4 0x02C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page11*/ +.byte4 0x03000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page12*/ +.byte4 0x03400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page13*/ +.byte4 0x03800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page14*/ +.byte4 0x03C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page15*/ +#endif +.byte4 0x20200000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 2 (Secnd)*/ +.byte4 0x20100000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 1 (Prim B)*/ +.byte4 0x20000000; +.byte4 (SDRAM_EBIU); /* Async Memory Bank 0 (Prim A)*/ +.byte4 0x20300000; /*Fix for Network*/ +.byte4 (SDRAM_EBIU); /*Async Memory bank 3*/ + +#ifdef CONFIG_STAMP +.byte4 0x04000000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x04400000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x04800000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x04C00000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x05000000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x05400000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x05800000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x05C00000; +.byte4 (SDRAM_DGENERIC); +.byte4 0x06000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page25*/ +.byte4 0x06400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page26*/ +.byte4 0x06800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page27*/ +.byte4 0x06C00000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page28*/ +.byte4 0x07000000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page29*/ +.byte4 0x07400000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page30*/ +.byte4 0x07800000; +.byte4 (SDRAM_DGENERIC); /*SDRAM_Page31*/ +#ifdef CONFIG_CPLB_INFO +.byte4 0x07C00000; +.byte4 (SDRAM_DKERNEL); /*SDRAM_Page32*/ +#endif +#endif + +.byte4 0xFF900000; +.byte4 (L1_DMEMORY); +.byte4 0xFF901000; +.byte4 (L1_DMEMORY); +.byte4 0xFF902000; +.byte4 (L1_DMEMORY); +.byte4 0xFF903000; +.byte4 (L1_DMEMORY); +.byte4 0xFF904000; +.byte4 (L1_DMEMORY); +.byte4 0xFF905000; +.byte4 (L1_DMEMORY); +.byte4 0xFF906000; +.byte4 (L1_DMEMORY); +.byte4 0xFF907000; +.byte4 (L1_DMEMORY); +.byte4 0xFF800000; +.byte4 (L1_DMEMORY); +.byte4 0xFF801000; +.byte4 (L1_DMEMORY); +.byte4 0xFF802000; +.byte4 (L1_DMEMORY); +.byte4 0xFF803000; +.byte4 (L1_DMEMORY); + +.byte4 0xffffffff; /*end of section - termination*/ + +#ifdef CONFIG_CPLB_INFO +.global ipdt_swapcount_table; /* swapin count first, then swapout count*/ +ipdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 90 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ + +.global dpdt_swapcount_table; /* swapin count first, then swapout count*/ +dpdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 110 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 120 */ + +#endif + +#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/cpu/bf533_irq.h b/include/asm-blackfin/cpu/bf533_irq.h new file mode 100644 index 00000000000..9c5230db414 --- /dev/null +++ b/include/asm-blackfin/cpu/bf533_irq.h @@ -0,0 +1,137 @@ +/* + * U-boot bf533_irq.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c + * Changed by HuTao Apr18, 2003 + * + * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle + * + * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca> + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com> + * + * Adapted for BlackFin BF533 by Bas Vermeulen <bas@buyways.nl> + * Copyright (c) 2003 BuyWays B.V. (www.buyways.nl) + + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF533_IRQ_H_ +#define _BF533_IRQ_H_ + +/* + * Interrupt source definitions + * Event Source Core Event Name Number + * EMU 0 + * Reset RST 1 + * NMI NMI 2 + * Exception EVX 3 + * Reserved -- 4 + * Hardware Error IVHW 5 + * Core Timer IVTMR 6 + * PLL Wakeup Interrupt IVG7 7 + * DMA Error (generic) IVG7 8 + * PPI Error Interrupt IVG7 9 + * SPORT0 Error Interrupt IVG7 10 + * SPORT1 Error Interrupt IVG7 11 + * SPI Error Interrupt IVG7 12 + * UART Error Interrupt IVG7 13 + * RTC Interrupt IVG8 14 + * DMA0 Interrupt (PPI) IVG8 15 + * DMA1 (SPORT0 RX) IVG9 16 + * DMA2 (SPORT0 TX) IVG9 17 + * DMA3 (SPORT1 RX) IVG9 18 + * DMA4 (SPORT1 TX) IVG9 19 + * DMA5 (PPI) IVG10 20 + * DMA6 (UART RX) IVG10 21 + * DMA7 (UART TX) IVG10 22 + * Timer0 IVG11 23 + * Timer1 IVG11 24 + * Timer2 IVG11 25 + * PF Interrupt A IVG12 26 + * PF Interrupt B IVG12 27 + * DMA8/9 Interrupt IVG13 28 + * DMA10/11 Interrupt IVG13 29 + * Watchdog Timer IVG13 30 + * Software Interrupt 1 IVG14 31 + * Software Interrupt 2 -- + * (lowest priority) IVG15 32 + */ + +/* The ABSTRACT IRQ definitions */ + +/* The first seven of the following are fixed, + * the rest you change if you need to + */ + +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ +#define IRQ_PLL_WAKEUP 7 /* PLL Wakeup Interrupt */ +#define IRQ_DMA_ERROR 8 /* DMA Error (general) */ +#define IRQ_PPI_ERROR 9 /* PPI Error Interrupt */ +#define IRQ_SPORT0_ERROR 10 /* SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR 11 /* SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR 12 /* SPI Error Interrupt */ +#define IRQ_UART_ERROR 13 /* UART Error Interrupt */ +#define IRQ_RTC 14 /* RTC Interrupt */ +#define IRQ_PPI 15 /* DMA0 Interrupt (PPI) */ +#define IRQ_SPORT0 16 /* DMA1 Interrupt (SPORT0 RX) */ +#define IRQ_SPARE1 17 /* DMA2 Interrupt (SPORT0 TX) */ +#define IRQ_SPORT1 18 /* DMA3 Interrupt (SPORT1 RX) */ +#define IRQ_SPARE2 19 /* DMA4 Interrupt (SPORT1 TX) */ +#define IRQ_SPI 20 /* DMA5 Interrupt (SPI) */ +#define IRQ_UART 21 /* DMA6 Interrupt (UART RX) */ +#define IRQ_SPARE3 22 /* DMA7 Interrupt (UART TX) */ +#define IRQ_TMR0 23 /* Timer 0 */ +#define IRQ_TMR1 24 /* Timer 1 */ +#define IRQ_TMR2 25 /* Timer 2 */ +#define IRQ_PROG_INTA 26 /* Programmable Flags A (8) */ +#define IRQ_PROG_INTB 27 /* Programmable Flags B (8) */ +#define IRQ_MEM_DMA0 28 /* DMA8/9 Interrupt (Memory DMA Stream 0) */ +#define IRQ_MEM_DMA1 29 /* DMA10/11 Interrupt (Memory DMA Stream 1) */ +#define IRQ_WATCH 30 /* Watch Dog Timer */ +#define IRQ_SW_INT1 31 /* Software Int 1 */ +#define IRQ_SW_INT2 32 /* Software Int 2 (reserved for SYSCALL) */ + +#define IRQ_UART_RX_BIT 0x4000 +#define IRQ_UART_TX_BIT 0x8000 +#define IRQ_UART_ERROR_BIT 0x40 + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 +#define SYS_IRQS 33 + +#endif diff --git a/include/asm-blackfin/cpu/bf533_rtc.h b/include/asm-blackfin/cpu/bf533_rtc.h new file mode 100644 index 00000000000..bc09922a5ea --- /dev/null +++ b/include/asm-blackfin/cpu/bf533_rtc.h @@ -0,0 +1,46 @@ +/* + * U-boot - bf533_rtc.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF533_RTC_H_ +#define _BF533_RTC_H_ + +void rtc_init(void); +void wait_for_complete(void); +void rtc_reset(void); + +#define MIN_TO_SECS(_x_) (60 * _x_) +#define HRS_TO_SECS(_x_) (60 * 60 * _x_) +#define DAYS_TO_SECS(_x_) (24 * 60 * 60 * _x_) + +#define NUM_SECS_IN_DAY (24 * 3600) +#define NUM_SECS_IN_HOUR (3600) +#define NUM_SECS_IN_MIN (60) + +/* Shift values for RTC_STAT register */ +#define DAY_BITS_OFF 17 +#define HOUR_BITS_OFF 12 +#define MIN_BITS_OFF 6 +#define SEC_BITS_OFF 0 + +#endif diff --git a/include/asm-blackfin/cpu/bf533_serial.h b/include/asm-blackfin/cpu/bf533_serial.h new file mode 100644 index 00000000000..d5e162a8f94 --- /dev/null +++ b/include/asm-blackfin/cpu/bf533_serial.h @@ -0,0 +1,79 @@ +/* + * U-boot bf533_serial.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef _BF533_SERIAL_H_ +#define _BF533_SERIAL_H_ + +#define BYTE_REF(addr) (*((volatile char*)addr)) +#define HALFWORD_REF(addr) (*((volatile short*)addr)) +#define WORD_REF(addr) (*((volatile long*)addr)) + +#define UART_THR_LO HALFWORD_REF(UART_THR) +#define UART_RBR_LO HALFWORD_REF(UART_RBR) +#define UART_DLL_LO HALFWORD_REF(UART_DLL) +#define UART_IER_LO HALFWORD_REF(UART_IER) +#define UART_IER_ERBFI 0x01 +#define UART_IER_ETBEI 0x02 +#define UART_IER_ELSI 0x04 +#define UART_IER_EDDSI 0x08 + +#define UART_DLH_LO HALFWORD_REF(UART_DLH) +#define UART_IIR_LO HALFWORD_REF(UART_IIR) +#define UART_IIR_NOINT 0x01 +#define UART_IIR_STATUS 0x06 +#define UART_IIR_LSR 0x06 +#define UART_IIR_RBR 0x04 +#define UART_IIR_THR 0x02 +#define UART_IIR_MSR 0x00 + +#define UART_LCR_LO HALFWORD_REF(UART_LCR) +#define UART_LCR_WLS5 0 +#define UART_LCR_WLS6 0x01 +#define UART_LCR_WLS7 0x02 +#define UART_LCR_WLS8 0x03 +#define UART_LCR_STB 0x04 +#define UART_LCR_PEN 0x08 +#define UART_LCR_EPS 0x10 +#define UART_LCR_SP 0x20 +#define UART_LCR_SB 0x40 +#define UART_LCR_DLAB 0x80 + +#define UART_MCR_LO HALFWORD_REF(UART_MCR) + +#define UART_LSR_LO HALFWORD_REF(UART_LSR) +#define UART_LSR_DR 0x01 +#define UART_LSR_OE 0x02 +#define UART_LSR_PE 0x04 +#define UART_LSR_FE 0x08 +#define UART_LSR_BI 0x10 +#define UART_LSR_THRE 0x20 +#define UART_LSR_TEMT 0x40 + +#define UART_MSR_LO HALFWORD_REF(UART_MSR) +#define UART_SCR_LO HALFWORD_REF(UART_SCR) +#define UART_GCTL_LO HALFWORD_REF(UART_GCTL) +#define UART_GCTL_UCEN 0x01 + +#endif diff --git a/include/asm-blackfin/cpu/cdefBF531.h b/include/asm-blackfin/cpu/cdefBF531.h new file mode 100644 index 00000000000..68d841d1855 --- /dev/null +++ b/include/asm-blackfin/cpu/cdefBF531.h @@ -0,0 +1,24 @@ +/* + * cdefBF531.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _CDEFBF531_H +#define _CDEFBF531_H + +#include <cdefBF532.h> + +#endif /* _CDEFBF531_H */ diff --git a/include/asm-blackfin/cpu/cdefBF532.h b/include/asm-blackfin/cpu/cdefBF532.h new file mode 100644 index 00000000000..a4d422f765d --- /dev/null +++ b/include/asm-blackfin/cpu/cdefBF532.h @@ -0,0 +1,398 @@ +/* + * cdefBF532.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _CDEF_BF532_H +#define _CDEF_BF532_H + +/* + * #if !defined(__ADSPLPBLACKFIN__) + * #warning cdefBF532.h should only be included for 532 compatible chips. + * #endif + */ + +/* include all Core registers and bit definitions */ +#include <asm/cpu/defBF532.h> + +/* include core specific register pointer definitions */ +#include <asm/cpu/cdef_LPBlackfin.h> + +/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ +#define pPLL_CTL ((volatile unsigned short *)PLL_CTL) +#define pPLL_STAT ((volatile unsigned short *)PLL_STAT) +#define pPLL_LOCKCNT ((volatile unsigned short *)PLL_LOCKCNT) +#define pCHIPID ((volatile unsigned long *)CHIPID) +#define pSWRST ((volatile unsigned short *)SWRST) +#define pSYSCR ((volatile unsigned short *)SYSCR) +#define pPLL_DIV ((volatile unsigned short *)PLL_DIV) +#define pVR_CTL ((volatile unsigned short *)VR_CTL) + +/* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */ +#define pSIC_IAR0 ((volatile unsigned long *)SIC_IAR0) +#define pSIC_IAR1 ((volatile unsigned long *)SIC_IAR1) +#define pSIC_IAR2 ((volatile unsigned long *)SIC_IAR2) +#define pSIC_IAR3 ((volatile unsigned long *)SIC_IAR3) +#define pSIC_IMASK ((volatile unsigned long *)SIC_IMASK) +#define pSIC_ISR ((volatile unsigned long *)SIC_ISR) +#define pSIC_IWR ((volatile unsigned long *)SIC_IWR) + +/* Watchdog Timer (0xFFC0 1000-0xFFC0 13FF) */ +#define pWDOG_CTL ((volatile unsigned short *)WDOG_CTL) +#define pWDOG_CNT ((volatile unsigned long *)WDOG_CNT) +#define pWDOG_STAT ((volatile unsigned long *)WDOG_STAT) + +/* Real Time Clock (0xFFC0 1400-0xFFC0 17FF) */ +#define pRTC_STAT ((volatile unsigned long *)RTC_STAT) +#define pRTC_ICTL ((volatile unsigned short *)RTC_ICTL) +#define pRTC_ISTAT ((volatile unsigned short *)RTC_ISTAT) +#define pRTC_SWCNT ((volatile unsigned short *)RTC_SWCNT) +#define pRTC_ALARM ((volatile unsigned long *)RTC_ALARM) +#define pRTC_FAST ((volatile unsigned short *)RTC_FAST) +#define pRTC_PREN ((volatile unsigned short *)RTC_PREN) + +/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */ +#define pFIO_DIR ((volatile unsigned short *)FIO_DIR) +#define pFIO_FLAG_C ((volatile unsigned short *)FIO_FLAG_C) +#define pFIO_FLAG_S ((volatile unsigned short *)FIO_FLAG_S) +#define pFIO_MASKA_C ((volatile unsigned short *)FIO_MASKA_C) +#define pFIO_MASKA_S ((volatile unsigned short *)FIO_MASKA_S) +#define pFIO_MASKB_C ((volatile unsigned short *)FIO_MASKB_C) +#define pFIO_MASKB_S ((volatile unsigned short *)FIO_MASKB_S) +#define pFIO_POLAR ((volatile unsigned short *)FIO_POLAR) +#define pFIO_EDGE ((volatile unsigned short *)FIO_EDGE) +#define pFIO_BOTH ((volatile unsigned short *)FIO_BOTH) +#define pFIO_INEN ((volatile unsigned short *)FIO_INEN) +#define pFIO_FLAG_D ((volatile unsigned short *)FIO_FLAG_D) +#define pFIO_FLAG_T ((volatile unsigned short *)FIO_FLAG_T) +#define pFIO_MASKA_D ((volatile unsigned short *)FIO_MASKA_D) +#define pFIO_MASKA_T ((volatile unsigned short *)FIO_MASKA_T) +#define pFIO_MASKB_D ((volatile unsigned short *)FIO_MASKB_D) +#define pFIO_MASKB_T ((volatile unsigned short *)FIO_MASKB_T) + +/* DMA Test Registers */ +#define pDMA_CCOMP ((volatile unsigned long *)DMA_CCOMP) +#define pDMA_ACOMP ((volatile unsigned long *)DMA_ACOMP) +#define pDMA_MISR ((volatile unsigned long *)DMA_MISR) +#define pDMA_TCPER ((volatile unsigned short *)DMA_TCPER) +#define pDMA_TCCNT ((volatile unsigned short *)DMA_TCCNT) +#define pDMA_TMODE ((volatile unsigned short *)DMA_TMODE) +#define pDMA_TMCHAN ((volatile unsigned short *)DMA_TMCHAN) +#define pDMA_TMSTAT ((volatile unsigned short *)DMA_TMSTAT) +#define pDMA_TMBD ((volatile unsigned short *)DMA_TMBD) +#define pDMA_TMM0D ((volatile unsigned short *)DMA_TMM0D) +#define pDMA_TMM1D ((volatile unsigned short *)DMA_TMM1D) +#define pDMA_TMMA ((volatile void **)DMA_TMMA) + +/* DMA Controller */ +#define pDMA0_CONFIG ((volatile unsigned short *)DMA0_CONFIG) +#define pDMA0_NEXT_DESC_PTR ((volatile void **)DMA0_NEXT_DESC_PTR) +#define pDMA0_START_ADDR ((volatile void **)DMA0_START_ADDR) +#define pDMA0_X_COUNT ((volatile unsigned short *)DMA0_X_COUNT) +#define pDMA0_Y_COUNT ((volatile unsigned short *)DMA0_Y_COUNT) +#define pDMA0_X_MODIFY ((volatile signed short *)DMA0_X_MODIFY) +#define pDMA0_Y_MODIFY ((volatile signed short *)DMA0_Y_MODIFY) +#define pDMA0_CURR_DESC_PTR ((volatile void **)DMA0_CURR_DESC_PTR) +#define pDMA0_CURR_ADDR ((volatile void **)DMA0_CURR_ADDR) +#define pDMA0_CURR_X_COUNT ((volatile unsigned short *)DMA0_CURR_X_COUNT) +#define pDMA0_CURR_Y_COUNT ((volatile unsigned short *)DMA0_CURR_Y_COUNT) +#define pDMA0_IRQ_STATUS ((volatile unsigned short *)DMA0_IRQ_STATUS) +#define pDMA0_PERIPHERAL_MAP ((volatile unsigned short *)DMA0_PERIPHERAL_MAP) + +#define pDMA1_CONFIG ((volatile unsigned short *)DMA1_CONFIG) +#define pDMA1_NEXT_DESC_PTR ((volatile void **)DMA1_NEXT_DESC_PTR) +#define pDMA1_START_ADDR ((volatile void **)DMA1_START_ADDR) +#define pDMA1_X_COUNT ((volatile unsigned short *)DMA1_X_COUNT) +#define pDMA1_Y_COUNT ((volatile unsigned short *)DMA1_Y_COUNT) +#define pDMA1_X_MODIFY ((volatile signed short *)DMA1_X_MODIFY) +#define pDMA1_Y_MODIFY ((volatile signed short *)DMA1_Y_MODIFY) +#define pDMA1_CURR_DESC_PTR ((volatile void **)DMA1_CURR_DESC_PTR) +#define pDMA1_CURR_ADDR ((volatile void **)DMA1_CURR_ADDR) +#define pDMA1_CURR_X_COUNT ((volatile unsigned short *)DMA1_CURR_X_COUNT) +#define pDMA1_CURR_Y_COUNT ((volatile unsigned short *)DMA1_CURR_Y_COUNT) +#define pDMA1_IRQ_STATUS ((volatile unsigned short *)DMA1_IRQ_STATUS) +#define pDMA1_PERIPHERAL_MAP ((volatile unsigned short *)DMA1_PERIPHERAL_MAP) + +#define pDMA2_CONFIG ((volatile unsigned short *)DMA2_CONFIG) +#define pDMA2_NEXT_DESC_PTR ((volatile void **)DMA2_NEXT_DESC_PTR) +#define pDMA2_START_ADDR ((volatile void **)DMA2_START_ADDR) +#define pDMA2_X_COUNT ((volatile unsigned short *)DMA2_X_COUNT) +#define pDMA2_Y_COUNT ((volatile unsigned short *)DMA2_Y_COUNT) +#define pDMA2_X_MODIFY ((volatile signed short *)DMA2_X_MODIFY) +#define pDMA2_Y_MODIFY ((volatile signed short *)DMA2_Y_MODIFY) +#define pDMA2_CURR_DESC_PTR ((volatile void **)DMA2_CURR_DESC_PTR) +#define pDMA2_CURR_ADDR ((volatile void **)DMA2_CURR_ADDR) +#define pDMA2_CURR_X_COUNT ((volatile unsigned short *)DMA2_CURR_X_COUNT) +#define pDMA2_CURR_Y_COUNT ((volatile unsigned short *)DMA2_CURR_Y_COUNT) +#define pDMA2_IRQ_STATUS ((volatile unsigned short *)DMA2_IRQ_STATUS) +#define pDMA2_PERIPHERAL_MAP ((volatile unsigned short *)DMA2_PERIPHERAL_MAP) + +#define pDMA3_CONFIG ((volatile unsigned short *)DMA3_CONFIG) +#define pDMA3_NEXT_DESC_PTR ((volatile void **)DMA3_NEXT_DESC_PTR) +#define pDMA3_START_ADDR ((volatile void **)DMA3_START_ADDR) +#define pDMA3_X_COUNT ((volatile unsigned short *)DMA3_X_COUNT) +#define pDMA3_Y_COUNT ((volatile unsigned short *)DMA3_Y_COUNT) +#define pDMA3_X_MODIFY ((volatile signed short *)DMA3_X_MODIFY) +#define pDMA3_Y_MODIFY ((volatile signed short *)DMA3_Y_MODIFY) +#define pDMA3_CURR_DESC_PTR ((volatile void **)DMA3_CURR_DESC_PTR) +#define pDMA3_CURR_ADDR ((volatile void **)DMA3_CURR_ADDR) +#define pDMA3_CURR_X_COUNT ((volatile unsigned short *)DMA3_CURR_X_COUNT) +#define pDMA3_CURR_Y_COUNT ((volatile unsigned short *)DMA3_CURR_Y_COUNT) +#define pDMA3_IRQ_STATUS ((volatile unsigned short *)DMA3_IRQ_STATUS) +#define pDMA3_PERIPHERAL_MAP ((volatile unsigned short *)DMA3_PERIPHERAL_MAP) + +#define pDMA4_CONFIG ((volatile unsigned short *)DMA4_CONFIG) +#define pDMA4_NEXT_DESC_PTR ((volatile void **)DMA4_NEXT_DESC_PTR) +#define pDMA4_START_ADDR ((volatile void **)DMA4_START_ADDR) +#define pDMA4_X_COUNT ((volatile unsigned short *)DMA4_X_COUNT) +#define pDMA4_Y_COUNT ((volatile unsigned short *)DMA4_Y_COUNT) +#define pDMA4_X_MODIFY ((volatile signed short *)DMA4_X_MODIFY) +#define pDMA4_Y_MODIFY ((volatile signed short *)DMA4_Y_MODIFY) +#define pDMA4_CURR_DESC_PTR ((volatile void **)DMA4_CURR_DESC_PTR) +#define pDMA4_CURR_ADDR ((volatile void **)DMA4_CURR_ADDR) +#define pDMA4_CURR_X_COUNT ((volatile unsigned short *)DMA4_CURR_X_COUNT) +#define pDMA4_CURR_Y_COUNT ((volatile unsigned short *)DMA4_CURR_Y_COUNT) +#define pDMA4_IRQ_STATUS ((volatile unsigned short *)DMA4_IRQ_STATUS) +#define pDMA4_PERIPHERAL_MAP ((volatile unsigned short *)DMA4_PERIPHERAL_MAP) + +#define pDMA5_CONFIG ((volatile unsigned short *)DMA5_CONFIG) +#define pDMA5_NEXT_DESC_PTR ((volatile void **)DMA5_NEXT_DESC_PTR) +#define pDMA5_START_ADDR ((volatile void **)DMA5_START_ADDR) +#define pDMA5_X_COUNT ((volatile unsigned short *)DMA5_X_COUNT) +#define pDMA5_Y_COUNT ((volatile unsigned short *)DMA5_Y_COUNT) +#define pDMA5_X_MODIFY ((volatile signed short *)DMA5_X_MODIFY) +#define pDMA5_Y_MODIFY ((volatile signed short *)DMA5_Y_MODIFY) +#define pDMA5_CURR_DESC_PTR ((volatile void **)DMA5_CURR_DESC_PTR) +#define pDMA5_CURR_ADDR ((volatile void **)DMA5_CURR_ADDR) +#define pDMA5_CURR_X_COUNT ((volatile unsigned short *)DMA5_CURR_X_COUNT) +#define pDMA5_CURR_Y_COUNT ((volatile unsigned short *)DMA5_CURR_Y_COUNT) +#define pDMA5_IRQ_STATUS ((volatile unsigned short *)DMA5_IRQ_STATUS) +#define pDMA5_PERIPHERAL_MAP ((volatile unsigned short *)DMA5_PERIPHERAL_MAP) + +#define pDMA6_CONFIG ((volatile unsigned short *)DMA6_CONFIG) +#define pDMA6_NEXT_DESC_PTR ((volatile void **)DMA6_NEXT_DESC_PTR) +#define pDMA6_START_ADDR ((volatile void **)DMA6_START_ADDR) +#define pDMA6_X_COUNT ((volatile unsigned short *)DMA6_X_COUNT) +#define pDMA6_Y_COUNT ((volatile unsigned short *)DMA6_Y_COUNT) +#define pDMA6_X_MODIFY ((volatile signed short *)DMA6_X_MODIFY) +#define pDMA6_Y_MODIFY ((volatile signed short *)DMA6_Y_MODIFY) +#define pDMA6_CURR_DESC_PTR ((volatile void **)DMA6_CURR_DESC_PTR) +#define pDMA6_CURR_ADDR ((volatile void **)DMA6_CURR_ADDR) +#define pDMA6_CURR_X_COUNT ((volatile unsigned short *)DMA6_CURR_X_COUNT) +#define pDMA6_CURR_Y_COUNT ((volatile unsigned short *)DMA6_CURR_Y_COUNT) +#define pDMA6_IRQ_STATUS ((volatile unsigned short *)DMA6_IRQ_STATUS) +#define pDMA6_PERIPHERAL_MAP ((volatile unsigned short *)DMA6_PERIPHERAL_MAP) + +#define pDMA7_CONFIG ((volatile unsigned short *)DMA7_CONFIG) +#define pDMA7_NEXT_DESC_PTR ((volatile void **)DMA7_NEXT_DESC_PTR) +#define pDMA7_START_ADDR ((volatile void **)DMA7_START_ADDR) +#define pDMA7_X_COUNT ((volatile unsigned short *)DMA7_X_COUNT) +#define pDMA7_Y_COUNT ((volatile unsigned short *)DMA7_Y_COUNT) +#define pDMA7_X_MODIFY ((volatile signed short *)DMA7_X_MODIFY) +#define pDMA7_Y_MODIFY ((volatile signed short *)DMA7_Y_MODIFY) +#define pDMA7_CURR_DESC_PTR ((volatile void **)DMA7_CURR_DESC_PTR) +#define pDMA7_CURR_ADDR ((volatile void **)DMA7_CURR_ADDR) +#define pDMA7_CURR_X_COUNT ((volatile unsigned short *)DMA7_CURR_X_COUNT) +#define pDMA7_CURR_Y_COUNT ((volatile unsigned short *)DMA7_CURR_Y_COUNT) +#define pDMA7_IRQ_STATUS ((volatile unsigned short *)DMA7_IRQ_STATUS) +#define pDMA7_PERIPHERAL_MAP ((volatile unsigned short *)DMA7_PERIPHERAL_MAP) + +#define pMDMA_D1_CONFIG ((volatile unsigned short *)MDMA_D1_CONFIG) +#define pMDMA_D1_NEXT_DESC_PTR ((volatile void **)MDMA_D1_NEXT_DESC_PTR) +#define pMDMA_D1_START_ADDR ((volatile void **)MDMA_D1_START_ADDR) +#define pMDMA_D1_X_COUNT ((volatile unsigned short *)MDMA_D1_X_COUNT) +#define pMDMA_D1_Y_COUNT ((volatile unsigned short *)MDMA_D1_Y_COUNT) +#define pMDMA_D1_X_MODIFY ((volatile signed short *)MDMA_D1_X_MODIFY) +#define pMDMA_D1_Y_MODIFY ((volatile signed short *)MDMA_D1_Y_MODIFY) +#define pMDMA_D1_CURR_DESC_PTR ((volatile void **)MDMA_D1_CURR_DESC_PTR) +#define pMDMA_D1_CURR_ADDR ((volatile void **)MDMA_D1_CURR_ADDR) +#define pMDMA_D1_CURR_X_COUNT ((volatile unsigned short *)MDMA_D1_CURR_X_COUNT) +#define pMDMA_D1_CURR_Y_COUNT ((volatile unsigned short *)MDMA_D1_CURR_Y_COUNT) +#define pMDMA_D1_IRQ_STATUS ((volatile unsigned short *)MDMA_D1_IRQ_STATUS) +#define pMDMA_D1_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_D1_PERIPHERAL_MAP) + +#define pMDMA_S1_CONFIG ((volatile unsigned short *)MDMA_S1_CONFIG) +#define pMDMA_S1_NEXT_DESC_PTR ((volatile void **)MDMA_S1_NEXT_DESC_PTR) +#define pMDMA_S1_START_ADDR ((volatile void **)MDMA_S1_START_ADDR) +#define pMDMA_S1_X_COUNT ((volatile unsigned short *)MDMA_S1_X_COUNT) +#define pMDMA_S1_Y_COUNT ((volatile unsigned short *)MDMA_S1_Y_COUNT) +#define pMDMA_S1_X_MODIFY ((volatile signed short *)MDMA_S1_X_MODIFY) +#define pMDMA_S1_Y_MODIFY ((volatile signed short *)MDMA_S1_Y_MODIFY) +#define pMDMA_S1_CURR_DESC_PTR ((volatile void **)MDMA_S1_CURR_DESC_PTR) +#define pMDMA_S1_CURR_ADDR ((volatile void **)MDMA_S1_CURR_ADDR) +#define pMDMA_S1_CURR_X_COUNT ((volatile unsigned short *)MDMA_S1_CURR_X_COUNT) +#define pMDMA_S1_CURR_Y_COUNT ((volatile unsigned short *)MDMA_S1_CURR_Y_COUNT) +#define pMDMA_S1_IRQ_STATUS ((volatile unsigned short *)MDMA_S1_IRQ_STATUS) +#define pMDMA_S1_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_S1_PERIPHERAL_MAP) + +#define pMDMA_D0_CONFIG ((volatile unsigned short *)MDMA_D0_CONFIG) +#define pMDMA_D0_NEXT_DESC_PTR ((volatile void **)MDMA_D0_NEXT_DESC_PTR) +#define pMDMA_D0_START_ADDR ((volatile void **)MDMA_D0_START_ADDR) +#define pMDMA_D0_X_COUNT ((volatile unsigned short *)MDMA_D0_X_COUNT) +#define pMDMA_D0_Y_COUNT ((volatile unsigned short *)MDMA_D0_Y_COUNT) +#define pMDMA_D0_X_MODIFY ((volatile signed short *)MDMA_D0_X_MODIFY) +#define pMDMA_D0_Y_MODIFY ((volatile signed short *)MDMA_D0_Y_MODIFY) +#define pMDMA_D0_CURR_DESC_PTR ((volatile void **)MDMA_D0_CURR_DESC_PTR) +#define pMDMA_D0_CURR_ADDR ((volatile void **)MDMA_D0_CURR_ADDR) +#define pMDMA_D0_CURR_X_COUNT ((volatile unsigned short *)MDMA_D0_CURR_X_COUNT) +#define pMDMA_D0_CURR_Y_COUNT ((volatile unsigned short *)MDMA_D0_CURR_Y_COUNT) +#define pMDMA_D0_IRQ_STATUS ((volatile unsigned short *)MDMA_D0_IRQ_STATUS) +#define pMDMA_D0_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_D0_PERIPHERAL_MAP) + +#define pMDMA_S0_CONFIG ((volatile unsigned short *)MDMA_S0_CONFIG) +#define pMDMA_S0_NEXT_DESC_PTR ((volatile void **)MDMA_S0_NEXT_DESC_PTR) +#define pMDMA_S0_START_ADDR ((volatile void **)MDMA_S0_START_ADDR) +#define pMDMA_S0_X_COUNT ((volatile unsigned short *)MDMA_S0_X_COUNT) +#define pMDMA_S0_Y_COUNT ((volatile unsigned short *)MDMA_S0_Y_COUNT) +#define pMDMA_S0_X_MODIFY ((volatile signed short *)MDMA_S0_X_MODIFY) +#define pMDMA_S0_Y_MODIFY ((volatile signed short *)MDMA_S0_Y_MODIFY) +#define pMDMA_S0_CURR_DESC_PTR ((volatile void **)MDMA_S0_CURR_DESC_PTR) +#define pMDMA_S0_CURR_ADDR ((volatile void **)MDMA_S0_CURR_ADDR) +#define pMDMA_S0_CURR_X_COUNT ((volatile unsigned short *)MDMA_S0_CURR_X_COUNT) +#define pMDMA_S0_CURR_Y_COUNT ((volatile unsigned short *)MDMA_S0_CURR_Y_COUNT) +#define pMDMA_S0_IRQ_STATUS ((volatile unsigned short *)MDMA_S0_IRQ_STATUS) +#define pMDMA_S0_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_S0_PERIPHERAL_MAP) + +/* Aysnchronous Memory Controller - External Bus Interface Unit (0xFFC0 3C00-0xFFC0 3FFF) */ +#define pEBIU_AMGCTL ((volatile unsigned short *)EBIU_AMGCTL) +#define pEBIU_AMBCTL0 ((volatile unsigned long *)EBIU_AMBCTL0) +#define pEBIU_AMBCTL1 ((volatile unsigned long *)EBIU_AMBCTL1) + +/* System Bus Interface Unit (0xFFC0 4800-0xFFC0 4FFF) */ +/* #define L1SBAR 0xFFC04840 */ /* L1 SRAM Base Address Register */ +/* #define L1CSR 0xFFC04844 */ /* L1 SRAM Control Initialization Register */ + +/* + * #define pDB_ACOMP ((volatile void **)DB_ACOMP) + * #define pDB_CCOMP ((volatile unsigned long *)DB_CCOMP) + */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC0 4C00-0xFFC0 4FFF) */ +#define pEBIU_SDGCTL ((volatile unsigned long *)EBIU_SDGCTL) +#define pEBIU_SDRRC ((volatile unsigned short *)EBIU_SDRRC) +#define pEBIU_SDSTAT ((volatile unsigned short *)EBIU_SDSTAT) +#define pEBIU_SDBCTL ((volatile unsigned short *)EBIU_SDBCTL) + +/* UART Controller */ +#define pUART_THR ((volatile unsigned short *)UART_THR) +#define pUART_RBR ((volatile unsigned short *)UART_RBR) +#define pUART_DLL ((volatile unsigned short *)UART_DLL) +#define pUART_IER ((volatile unsigned short *)UART_IER) +#define pUART_DLH ((volatile unsigned short *)UART_DLH) +#define pUART_IIR ((volatile unsigned short *)UART_IIR) +#define pUART_LCR ((volatile unsigned short *)UART_LCR) +#define pUART_MCR ((volatile unsigned short *)UART_MCR) +#define pUART_LSR ((volatile unsigned short *)UART_LSR) + +/* + * #define UART_MSR + */ +#define pUART_SCR ((volatile unsigned short *)UART_SCR) +#define pUART_GCTL ((volatile unsigned short *)UART_GCTL) + +/* SPI Controller */ +#define pSPI_CTL ((volatile unsigned short *)SPI_CTL) +#define pSPI_FLG ((volatile unsigned short *)SPI_FLG) +#define pSPI_STAT ((volatile unsigned short *)SPI_STAT) +#define pSPI_TDBR ((volatile unsigned short *)SPI_TDBR) +#define pSPI_RDBR ((volatile unsigned short *)SPI_RDBR) +#define pSPI_BAUD ((volatile unsigned short *)SPI_BAUD) +#define pSPI_SHADOW ((volatile unsigned short *)SPI_SHADOW) + +/* TIMER 0, 1, 2 Registers */ +#define pTIMER0_CONFIG ((volatile unsigned short *)TIMER0_CONFIG) +#define pTIMER0_COUNTER ((volatile unsigned long *)TIMER0_COUNTER) +#define pTIMER0_PERIOD ((volatile unsigned long *)TIMER0_PERIOD) +#define pTIMER0_WIDTH ((volatile unsigned long *)TIMER0_WIDTH) + +#define pTIMER1_CONFIG ((volatile unsigned short *)TIMER1_CONFIG) +#define pTIMER1_COUNTER ((volatile unsigned long *)TIMER1_COUNTER) +#define pTIMER1_PERIOD ((volatile unsigned long *)TIMER1_PERIOD) +#define pTIMER1_WIDTH ((volatile unsigned long *)TIMER1_WIDTH) + +#define pTIMER2_CONFIG ((volatile unsigned short *)TIMER2_CONFIG) +#define pTIMER2_COUNTER ((volatile unsigned long *)TIMER2_COUNTER) +#define pTIMER2_PERIOD ((volatile unsigned long *)TIMER2_PERIOD) +#define pTIMER2_WIDTH ((volatile unsigned long *)TIMER2_WIDTH) + +#define pTIMER_ENABLE ((volatile unsigned short *)TIMER_ENABLE) +#define pTIMER_DISABLE ((volatile unsigned short *)TIMER_DISABLE) +#define pTIMER_STATUS ((volatile unsigned short *)TIMER_STATUS) + +/* SPORT0 Controller */ +#define pSPORT0_TCR1 ((volatile unsigned short *)SPORT0_TCR1) +#define pSPORT0_TCR2 ((volatile unsigned short *)SPORT0_TCR2) +#define pSPORT0_TCLKDIV ((volatile unsigned short *)SPORT0_TCLKDIV) +#define pSPORT0_TFSDIV ((volatile unsigned short *)SPORT0_TFSDIV) +#define pSPORT0_TX ((volatile long *)SPORT0_TX) +#define pSPORT0_RX ((volatile long *)SPORT0_RX) +#define pSPORT0_TX32 ((volatile long *)SPORT0_TX) +#define pSPORT0_RX32 ((volatile long *)SPORT0_RX) +#define pSPORT0_TX16 ((volatile unsigned short *)SPORT0_TX) +#define pSPORT0_RX16 ((volatile unsigned short *)SPORT0_RX) +#define pSPORT0_RCR1 ((volatile unsigned short *)SPORT0_RCR1) +#define pSPORT0_RCR2 ((volatile unsigned short *)SPORT0_RCR2) +#define pSPORT0_RCLKDIV ((volatile unsigned short *)SPORT0_RCLKDIV) +#define pSPORT0_RFSDIV ((volatile unsigned short *)SPORT0_RFSDIV) +#define pSPORT0_STAT ((volatile unsigned short *)SPORT0_STAT) +#define pSPORT0_CHNL ((volatile unsigned short *)SPORT0_CHNL) +#define pSPORT0_MCMC1 ((volatile unsigned short *)SPORT0_MCMC1) +#define pSPORT0_MCMC2 ((volatile unsigned short *)SPORT0_MCMC2) +#define pSPORT0_MTCS0 ((volatile unsigned long *)SPORT0_MTCS0) +#define pSPORT0_MTCS1 ((volatile unsigned long *)SPORT0_MTCS1) +#define pSPORT0_MTCS2 ((volatile unsigned long *)SPORT0_MTCS2) +#define pSPORT0_MTCS3 ((volatile unsigned long *)SPORT0_MTCS3) +#define pSPORT0_MRCS0 ((volatile unsigned long *)SPORT0_MRCS0) +#define pSPORT0_MRCS1 ((volatile unsigned long *)SPORT0_MRCS1) +#define pSPORT0_MRCS2 ((volatile unsigned long *)SPORT0_MRCS2) +#define pSPORT0_MRCS3 ((volatile unsigned long *)SPORT0_MRCS3) + +/* SPORT1 Controller */ +#define pSPORT1_TCR1 ((volatile unsigned short *)SPORT1_TCR1) +#define pSPORT1_TCR2 ((volatile unsigned short *)SPORT1_TCR2) +#define pSPORT1_TCLKDIV ((volatile unsigned short *)SPORT1_TCLKDIV) +#define pSPORT1_TFSDIV ((volatile unsigned short *)SPORT1_TFSDIV) +#define pSPORT1_TX ((volatile long *)SPORT1_TX) +#define pSPORT1_RX ((volatile long *)SPORT1_RX) +#define pSPORT1_TX32 ((volatile long *)SPORT1_TX) +#define pSPORT1_RX32 ((volatile long *)SPORT1_RX) +#define pSPORT1_TX16 ((volatile unsigned short *)SPORT1_TX) +#define pSPORT1_RX16 ((volatile unsigned short *)SPORT1_RX) +#define pSPORT1_RCR1 ((volatile unsigned short *)SPORT1_RCR1) +#define pSPORT1_RCR2 ((volatile unsigned short *)SPORT1_RCR2) +#define pSPORT1_RCLKDIV ((volatile unsigned short *)SPORT1_RCLKDIV) +#define pSPORT1_RFSDIV ((volatile unsigned short *)SPORT1_RFSDIV) +#define pSPORT1_STAT ((volatile unsigned short *)SPORT1_STAT) +#define pSPORT1_CHNL ((volatile unsigned short *)SPORT1_CHNL) +#define pSPORT1_MCMC1 ((volatile unsigned short *)SPORT1_MCMC1) +#define pSPORT1_MCMC2 ((volatile unsigned short *)SPORT1_MCMC2) +#define pSPORT1_MTCS0 ((volatile unsigned long *)SPORT1_MTCS0) +#define pSPORT1_MTCS1 ((volatile unsigned long *)SPORT1_MTCS1) +#define pSPORT1_MTCS2 ((volatile unsigned long *)SPORT1_MTCS2) +#define pSPORT1_MTCS3 ((volatile unsigned long *)SPORT1_MTCS3) +#define pSPORT1_MRCS0 ((volatile unsigned long *)SPORT1_MRCS0) +#define pSPORT1_MRCS1 ((volatile unsigned long *)SPORT1_MRCS1) +#define pSPORT1_MRCS2 ((volatile unsigned long *)SPORT1_MRCS2) +#define pSPORT1_MRCS3 ((volatile unsigned long *)SPORT1_MRCS3) + +/* Parallel Peripheral Interface (PPI) */ +#define pPPI_CONTROL ((volatile unsigned short *)PPI_CONTROL) +#define pPPI_STATUS ((volatile unsigned short *)PPI_STATUS) +#define pPPI_DELAY ((volatile unsigned short *)PPI_DELAY) +#define pPPI_COUNT ((volatile unsigned short *)PPI_COUNT) +#define pPPI_FRAME ((volatile unsigned short *)PPI_FRAME) + +#endif /* _CDEF_BF532_H */ diff --git a/include/asm-blackfin/cpu/cdefBF533.h b/include/asm-blackfin/cpu/cdefBF533.h new file mode 100644 index 00000000000..8c751e6073f --- /dev/null +++ b/include/asm-blackfin/cpu/cdefBF533.h @@ -0,0 +1,24 @@ +/* + * cdefBF533.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _CDEFBF533_H +#define _CDEFBF533_H + +#include <asm/cpu/cdefBF532.h> + +#endif /* _CDEFBF533_H */ diff --git a/include/asm-blackfin/cpu/cdefBF53x.h b/include/asm-blackfin/cpu/cdefBF53x.h new file mode 100644 index 00000000000..db4eaa9cf2d --- /dev/null +++ b/include/asm-blackfin/cpu/cdefBF53x.h @@ -0,0 +1,32 @@ +/************************************************************************ + * + * cdefBF53x.h + * + * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. + * + ************************************************************************/ + +#ifndef _CDEFBF53x_H +#define _CDEFBF53x_H + +#if defined(__ADSPBF531__) + #include <asm/cpu/cdefBF531.h> +#elif defined(__ADSPBF532__) + #include <asm/cpu/cdefBF532.h> +#elif defined(__ADSPBF533__) + #include <asm/cpu/cdefBF533.h> +#elif defined(__ADSPBF561__) + #include <asm/cpu/cdefBF561.h> +#elif defined(__ADSPBF535__) + #include <asm/cpu/cdefBF535.h> +#elif defined(__AD6532__) + #include <sam/cpu/cdefAD6532.h> +#else + #if defined(__ADSPLPBLACKFIN__) + #include <asm/cpu/cdefBF532.h> + #else + #include <asm/cpu/cdefBF535.h> + #endif +#endif + +#endif /* _CDEFBF53x_H */ diff --git a/include/asm-blackfin/cpu/cdef_LPBlackfin.h b/include/asm-blackfin/cpu/cdef_LPBlackfin.h new file mode 100644 index 00000000000..e6471cbcb37 --- /dev/null +++ b/include/asm-blackfin/cpu/cdef_LPBlackfin.h @@ -0,0 +1,185 @@ +/* + * cdef_LPBlackfin.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _CDEF_LPBLACKFIN_H +#define _CDEF_LPBLACKFIN_H + +/* + * #if !defined(__ADSPLPBLACKFIN__) + * #warning cdef_LPBlackfin.h should only be included for 532 compatible chips. + * #endif + */ +#include <asm/cpu/def_LPBlackfin.h> + +/* Cache & SRAM Memory */ +#define pSRAM_BASE_ADDRESS ((volatile void **)SRAM_BASE_ADDRESS) +#define pDMEM_CONTROL ((volatile unsigned long *)DMEM_CONTROL) +#define pDCPLB_STATUS ((volatile unsigned long *)DCPLB_STATUS) +#define pDCPLB_FAULT_ADDR ((volatile void **)DCPLB_FAULT_ADDR) + +/* #define MMR_TIMEOUT 0xFFE00010 */ /* Memory-Mapped Register Timeout Register */ +#define pDCPLB_ADDR0 ((volatile void **)DCPLB_ADDR0) +#define pDCPLB_ADDR1 ((volatile void **)DCPLB_ADDR1) +#define pDCPLB_ADDR2 ((volatile void **)DCPLB_ADDR2) +#define pDCPLB_ADDR3 ((volatile void **)DCPLB_ADDR3) +#define pDCPLB_ADDR4 ((volatile void **)DCPLB_ADDR4) +#define pDCPLB_ADDR5 ((volatile void **)DCPLB_ADDR5) +#define pDCPLB_ADDR6 ((volatile void **)DCPLB_ADDR6) +#define pDCPLB_ADDR7 ((volatile void **)DCPLB_ADDR7) +#define pDCPLB_ADDR8 ((volatile void **)DCPLB_ADDR8) +#define pDCPLB_ADDR9 ((volatile void **)DCPLB_ADDR9) +#define pDCPLB_ADDR10 ((volatile void **)DCPLB_ADDR10) +#define pDCPLB_ADDR11 ((volatile void **)DCPLB_ADDR11) +#define pDCPLB_ADDR12 ((volatile void **)DCPLB_ADDR12) +#define pDCPLB_ADDR13 ((volatile void **)DCPLB_ADDR13) +#define pDCPLB_ADDR14 ((volatile void **)DCPLB_ADDR14) +#define pDCPLB_ADDR15 ((volatile void **)DCPLB_ADDR15) +#define pDCPLB_DATA0 ((volatile unsigned long *)DCPLB_DATA0) +#define pDCPLB_DATA1 ((volatile unsigned long *)DCPLB_DATA1) +#define pDCPLB_DATA2 ((volatile unsigned long *)DCPLB_DATA2) +#define pDCPLB_DATA3 ((volatile unsigned long *)DCPLB_DATA3) +#define pDCPLB_DATA4 ((volatile unsigned long *)DCPLB_DATA4) +#define pDCPLB_DATA5 ((volatile unsigned long *)DCPLB_DATA5) +#define pDCPLB_DATA6 ((volatile unsigned long *)DCPLB_DATA6) +#define pDCPLB_DATA7 ((volatile unsigned long *)DCPLB_DATA7) +#define pDCPLB_DATA8 ((volatile unsigned long *)DCPLB_DATA8) +#define pDCPLB_DATA9 ((volatile unsigned long *)DCPLB_DATA9) +#define pDCPLB_DATA10 ((volatile unsigned long *)DCPLB_DATA10) +#define pDCPLB_DATA11 ((volatile unsigned long *)DCPLB_DATA11) +#define pDCPLB_DATA12 ((volatile unsigned long *)DCPLB_DATA12) +#define pDCPLB_DATA13 ((volatile unsigned long *)DCPLB_DATA13) +#define pDCPLB_DATA14 ((volatile unsigned long *)DCPLB_DATA14) +#define pDCPLB_DATA15 ((volatile unsigned long *)DCPLB_DATA15) +#define pDTEST_COMMAND ((volatile unsigned long *)DTEST_COMMAND) + +/* #define DTEST_INDEX 0xFFE00304 */ /* Data Test Index Register */ +#define pDTEST_DATA0 ((volatile unsigned long *)DTEST_DATA0) +#define pDTEST_DATA1 ((volatile unsigned long *)DTEST_DATA1) + +/* + * # define DTEST_DATA2 0xFFE00408 Data Test Data Register + * #define DTEST_DATA3 0xFFE0040C Data Test Data Register + */ +#define pIMEM_CONTROL ((volatile unsigned long *)IMEM_CONTROL) +#define pICPLB_STATUS ((volatile unsigned long *)ICPLB_STATUS) +#define pICPLB_FAULT_ADDR ((volatile void **)ICPLB_FAULT_ADDR) +#define pICPLB_ADDR0 ((volatile void **)ICPLB_ADDR0) +#define pICPLB_ADDR1 ((volatile void **)ICPLB_ADDR1) +#define pICPLB_ADDR2 ((volatile void **)ICPLB_ADDR2) +#define pICPLB_ADDR3 ((volatile void **)ICPLB_ADDR3) +#define pICPLB_ADDR4 ((volatile void **)ICPLB_ADDR4) +#define pICPLB_ADDR5 ((volatile void **)ICPLB_ADDR5) +#define pICPLB_ADDR6 ((volatile void **)ICPLB_ADDR6) +#define pICPLB_ADDR7 ((volatile void **)ICPLB_ADDR7) +#define pICPLB_ADDR8 ((volatile void **)ICPLB_ADDR8) +#define pICPLB_ADDR9 ((volatile void **)ICPLB_ADDR9) +#define pICPLB_ADDR10 ((volatile void **)ICPLB_ADDR10) +#define pICPLB_ADDR11 ((volatile void **)ICPLB_ADDR11) +#define pICPLB_ADDR12 ((volatile void **)ICPLB_ADDR12) +#define pICPLB_ADDR13 ((volatile void **)ICPLB_ADDR13) +#define pICPLB_ADDR14 ((volatile void **)ICPLB_ADDR14) +#define pICPLB_ADDR15 ((volatile void **)ICPLB_ADDR15) +#define pICPLB_DATA0 ((volatile unsigned long *)ICPLB_DATA0) +#define pICPLB_DATA1 ((volatile unsigned long *)ICPLB_DATA1) +#define pICPLB_DATA2 ((volatile unsigned long *)ICPLB_DATA2) +#define pICPLB_DATA3 ((volatile unsigned long *)ICPLB_DATA3) +#define pICPLB_DATA4 ((volatile unsigned long *)ICPLB_DATA4) +#define pICPLB_DATA5 ((volatile unsigned long *)ICPLB_DATA5) +#define pICPLB_DATA6 ((volatile unsigned long *)ICPLB_DATA6) +#define pICPLB_DATA7 ((volatile unsigned long *)ICPLB_DATA7) +#define pICPLB_DATA8 ((volatile unsigned long *)ICPLB_DATA8) +#define pICPLB_DATA9 ((volatile unsigned long *)ICPLB_DATA9) +#define pICPLB_DATA10 ((volatile unsigned long *)ICPLB_DATA10) +#define pICPLB_DATA11 ((volatile unsigned long *)ICPLB_DATA11) +#define pICPLB_DATA12 ((volatile unsigned long *)ICPLB_DATA12) +#define pICPLB_DATA13 ((volatile unsigned long *)ICPLB_DATA13) +#define pICPLB_DATA14 ((volatile unsigned long *)ICPLB_DATA14) +#define pICPLB_DATA15 ((volatile unsigned long *)ICPLB_DATA15) +#define pITEST_COMMAND ((volatile unsigned long *)ITEST_COMMAND) + +/* #define ITEST_INDEX 0xFFE01304 */ /* Instruction Test Index Register */ +#define pITEST_DATA0 ((volatile unsigned long *)ITEST_DATA0) +#define pITEST_DATA1 ((volatile unsigned long *)ITEST_DATA1) + +/* Event/Interrupt Registers */ +#define pEVT0 ((volatile void **)EVT0) +#define pEVT1 ((volatile void **)EVT1) +#define pEVT2 ((volatile void **)EVT2) +#define pEVT3 ((volatile void **)EVT3) +#define pEVT4 ((volatile void **)EVT4) +#define pEVT5 ((volatile void **)EVT5) +#define pEVT6 ((volatile void **)EVT6) +#define pEVT7 ((volatile void **)EVT7) +#define pEVT8 ((volatile void **)EVT8) +#define pEVT9 ((volatile void **)EVT9) +#define pEVT10 ((volatile void **)EVT10) +#define pEVT11 ((volatile void **)EVT11) +#define pEVT12 ((volatile void **)EVT12) +#define pEVT13 ((volatile void **)EVT13) +#define pEVT14 ((volatile void **)EVT14) +#define pEVT15 ((volatile void **)EVT15) +#define pIMASK ((volatile unsigned long *)IMASK) +#define pIPEND ((volatile unsigned long *)IPEND) +#define pILAT ((volatile unsigned long *)ILAT) + +/* Core Timer Registers */ +#define pTCNTL ((volatile unsigned long *)TCNTL) +#define pTPERIOD ((volatile unsigned long *)TPERIOD) +#define pTSCALE ((volatile unsigned long *)TSCALE) +#define pTCOUNT ((volatile unsigned long *)TCOUNT) + +/* Debug/MP/Emulation Registers */ +#define pDSPID ((volatile unsigned long *)DSPID) +#define pDBGCTL ((volatile unsigned long *)DBGCTL) +#define pDBGSTAT ((volatile unsigned long *)DBGSTAT) +#define pEMUDAT ((volatile unsigned long *)EMUDAT) + +/* Trace Buffer Registers */ +#define pTBUFCTL ((volatile unsigned long *)TBUFCTL) +#define pTBUFSTAT ((volatile unsigned long *)TBUFSTAT) +#define pTBUF ((volatile void **)TBUF) + +/* Watch Point Control Registers */ +#define pWPIACTL ((volatile unsigned long *)WPIACTL) +#define pWPIA0 ((volatile void **)WPIA0) +#define pWPIA1 ((volatile void **)WPIA1) +#define pWPIA2 ((volatile void **)WPIA2) +#define pWPIA3 ((volatile void **)WPIA3) +#define pWPIA4 ((volatile void **)WPIA4) +#define pWPIA5 ((volatile void **)WPIA5) +#define pWPIACNT0 ((volatile unsigned long *)WPIACNT0) +#define pWPIACNT1 ((volatile unsigned long *)WPIACNT1) +#define pWPIACNT2 ((volatile unsigned long *)WPIACNT2) +#define pWPIACNT3 ((volatile unsigned long *)WPIACNT3) +#define pWPIACNT4 ((volatile unsigned long *)WPIACNT4) +#define pWPIACNT5 ((volatile unsigned long *)WPIACNT5) +#define pWPDACTL ((volatile unsigned long *)WPDACTL) +#define pWPDA0 ((volatile void **)WPDA0) +#define pWPDA1 ((volatile void **)WPDA1) +#define pWPDACNT0 ((volatile unsigned long *)WPDACNT0) +#define pWPDACNT1 ((volatile unsigned long *)WPDACNT1) +#define pWPSTAT ((volatile unsigned long *)WPSTAT) + +/* Performance Monitor Registers */ +#define pPFCTL ((volatile unsigned long *)PFCTL) +#define pPFCNTR0 ((volatile unsigned long *)PFCNTR0) +#define pPFCNTR1 ((volatile unsigned long *)PFCNTR1) + +/* #define IPRIO 0xFFE02110 */ /* Core Interrupt Priority Register */ + +#endif /* _CDEF_LPBLACKFIN_H */ diff --git a/include/asm-blackfin/cpu/defBF531.h b/include/asm-blackfin/cpu/defBF531.h new file mode 100644 index 00000000000..6c7cd5a6dba --- /dev/null +++ b/include/asm-blackfin/cpu/defBF531.h @@ -0,0 +1,24 @@ +/* + * defBF531.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _DEFBF531_H +#define _DEFBF531_H + +#include <defBF532.h> + +#endif /* _DEFBF531_H */ diff --git a/include/asm-blackfin/cpu/defBF532.h b/include/asm-blackfin/cpu/defBF532.h new file mode 100644 index 00000000000..26a5fe6442e --- /dev/null +++ b/include/asm-blackfin/cpu/defBF532.h @@ -0,0 +1,1159 @@ +/* + * defBF532.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */ + +#ifndef _DEF_BF532_H +#define _DEF_BF532_H + +/* + * #if !defined(__ADSPLPBLACKFIN__) + * #warning defBF532.h should only be included for 532 compatible chips + * #endif + */ + +/* include all Core registers and bit definitions */ +#include <asm/cpu/def_LPBlackfin.h> + +/* Helper macros + * usage: + * P0.H = HI(UART_THR); + * P0.L = LO(UART_THR); + */ + +#define LO(con32) ((con32) & 0xFFFF) +#define lo(con32) ((con32) & 0xFFFF) +#define HI(con32) (((con32) >> 16) & 0xFFFF) +#define hi(con32) (((con32) >> 16) & 0xFFFF) + +/* + * System MMR Register Map + */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ +#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ +#define CHIPID 0xFFC00014 /* Chip ID register (32-bit) */ +#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ +#define SYSCR 0xFFC00104 /* System Configuration register */ + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART_THR 0xFFC00400 /* Transmit Holding register */ +#define UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART_LCR 0xFFC0040C /* Line Control Register */ +#define UART_MCR 0xFFC00410 /* Modem Control Register */ +#define UART_LSR 0xFFC00414 /* Line Status Register */ +/* #define UART_MSR 0xFFC00418 */ /* Modem Status Register (UNUSED in ADSP-BF532) */ +#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER_ENABLE 0xFFC00640 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00644 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00648 /* Timer Status Register */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */ +#define FIO_FLAG_D 0xFFC00700 /* Flag Mask to directly specify state of pins */ +#define FIO_FLAG_C 0xFFC00704 /* Peripheral Interrupt Flag Register (clear) */ +#define FIO_FLAG_S 0xFFC00708 /* Peripheral Interrupt Flag Register (set) */ +#define FIO_FLAG_T 0xFFC0070C /* Flag Mask to directly toggle state of pins */ +#define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Register (set directly) */ +#define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Register (clear) */ +#define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Register (set) */ +#define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Register (toggle) */ +#define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Register (set directly) */ +#define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Register (clear) */ +#define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Register (set) */ +#define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Register (toggle) */ +#define FIO_DIR 0xFFC00730 /* Peripheral Flag Direction Register */ +#define FIO_POLAR 0xFFC00734 /* Flag Source Polarity Register */ +#define FIO_EDGE 0xFFC00738 /* Flag Source Sensitivity Register */ +#define FIO_BOTH 0xFFC0073C /* Flag Set on BOTH Edges Register */ +#define FIO_INEN 0xFFC00740 /* Flag Input Enable Register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* DMA Test Registers */ +#define DMA_CCOMP 0xFFC00B04 /* DMA Cycle Count Register */ +#define DMA_ACOMP 0xFFC00B00 /* Debug Compare Address Register */ +#define DMA_MISR 0xFFC00B08 /* MISR Register */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ +#define DMA_TMODE 0xFFC00B14 /* DMA Test Modes Register */ +#define DMA_TMCHAN 0xFFC00B18 /* DMA Testmode Selected Channel Register */ +#define DMA_TMSTAT 0xFFC00B1C /* DMA Testmode Channel Status Register */ +#define DMA_TMBD 0xFFC00B20 /* DMA Testmode DAB Bus Data Register */ +#define DMA_TMM0D 0xFFC00B24 /* DMA Testmode Mem0 Data Register */ +#define DMA_TMM1D 0xFFC00B28 /* DMA Testmode Mem1 Data Register */ +#define DMA_TMMA 0xFFC00B2C /* DMA Testmode Memory Address Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ + +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ + +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ + +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ + +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ + +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ + +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ + +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ + +#define MDMA_D1_CONFIG 0xFFC00E88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00E80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00E84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_X_COUNT 0xFFC00E90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_Y_COUNT 0xFFC00E98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00E94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00E9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00EA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00EA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00EB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00EB8 /* MemDMA Stream 1 Destination Current Y Count Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00EA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00EAC /* MemDMA Stream 1 Destination Peripheral Map Register */ + +#define MDMA_S1_CONFIG 0xFFC00EC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00EC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00EC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_X_COUNT 0xFFC00ED0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_Y_COUNT 0xFFC00ED8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00ED4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00EDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00EE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00EE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00EF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00EF8 /* MemDMA Stream 1 Source Current Y Count Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00EE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00EEC /* MemDMA Stream 1 Source Peripheral Map Register */ + +#define MDMA_D0_CONFIG 0xFFC00E08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00E00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00E04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_X_COUNT 0xFFC00E10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_Y_COUNT 0xFFC00E18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00E14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00E1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00E20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00E24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00E30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00E38 /* MemDMA Stream 0 Destination Current Y Count Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00E28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00E2C /* MemDMA Stream 0 Destination Peripheral Map Register */ + +#define MDMA_S0_CONFIG 0xFFC00E48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00E40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00E44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_X_COUNT 0xFFC00E50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_Y_COUNT 0xFFC00E58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00E54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00E5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00E60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00E64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00E70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00E78 /* MemDMA Stream 0 Source Current Y Count Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00E68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00E6C /* MemDMA Stream 0 Source Peripheral Map Register */ + +/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + +/* + * System MMR Register Bits + */ +/* + * PLL AND RESET MASKS + */ + +/* PLL_CTL Masks */ +#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ +#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x00000008 /* Core clock off */ +#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ +#define BYPASS 0x00000100 /* Bypass the PLL */ + +/* PLL_DIV Masks */ +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ + +/* SWRST Mask */ +#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */ + +/* + * SYSTEM INTERRUPT CONTROLLER MASKS + */ + +/* SIC_IAR0 Masks */ +#define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) ((x)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) ((x)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) ((x)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) ((x)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) ((x)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) ((x)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) ((x)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Masks */ +#define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) ((x)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) ((x)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) ((x)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) ((x)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) ((x)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) ((x)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) ((x)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Masks */ +#define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) ((x)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) ((x)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) ((x)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) ((x)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) ((x)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) ((x)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) ((x)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ + +/* + * WATCHDOG TIMER MASKS + */ +/* Watchdog Timer WDOG_CTL Register */ +#define ICTL(x) ((x<<1) & 0x0006) +#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */ +#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */ +#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */ +#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */ + +#define TMR_EN 0x0000 +#define TMR_DIS 0x0AD0 +#define TRO 0x8000 + +#define ICTL_P0 0x01 +#define ICTL_P1 0x02 +#define TRO_P 0x0F + +/* RTC_STAT and RTC_ALARM register */ +#define RTSEC 0x0000003F /* Real-Time Clock Seconds */ +#define RTMIN 0x00000FC0 /* Real-Time Clock Minutes */ +#define RTHR 0x0001F000 /* Real-Time Clock Hours */ +#define RTDAY 0xFFFE0000 /* Real-Time Clock Days */ + +/* RTC_ICTL register */ +#define SWIE 0x0001 /* Stopwatch Interrupt Enable */ +#define AIE 0x0002 /* Alarm Interrupt Enable */ +#define SIE 0x0004 /* Seconds (1 Hz) Interrupt Enable */ +#define MIE 0x0008 /* Minutes Interrupt Enable */ +#define HIE 0x0010 /* Hours Interrupt Enable */ +#define DIE 0x0020 /* 24 Hours (Days) Interrupt Enable */ +#define DAIE 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WCIE 0x8000 /* Write Complete Interrupt Enable */ + +/* RTC_ISTAT register */ +#define SWEF 0x0001 /* Stopwatch Event Flag */ +#define AEF 0x0002 /* Alarm Event Flag */ +#define SEF 0x0004 /* Seconds (1 Hz) Event Flag */ +#define MEF 0x0008 /* Minutes Event Flag */ +#define HEF 0x0010 /* Hours Event Flag */ +#define DEF 0x0020 /* 24 Hours (Days) Event Flag */ +#define DAEF 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Event Flag */ +#define WPS 0x4000 /* Write Pending Status (RO) */ +#define WCOM 0x8000 /* Write Complete */ + +/* RTC_FAST Mask (RTC_PREN Mask) */ +#define ENABLE_PRESCALE 0x00000001 /* Enable prescaler so RTC runs at 1 Hz */ +#define PREN 0x00000001 /* ** Must be set after power-up for proper operation of RTC */ + +/* + * UART CONTROLLER MASKS + */ + +/* UART_LCR Register */ +#define DLAB 0x80 +#define SB 0x40 +#define STP 0x20 +#define EPS 0x10 +#define PEN 0x08 +#define STB 0x04 +#define WLS(x) ((x-5) & 0x03) + +#define DLAB_P 0x07 +#define SB_P 0x06 +#define STP_P 0x05 +#define EPS_P 0x04 +#define PEN_P 0x03 +#define STB_P 0x02 +#define WLS_P1 0x01 +#define WLS_P0 0x00 + +/* UART_MCR Register */ +#define LOOP_ENA 0x10 +#define LOOP_ENA_P 0x04 + +/* UART_LSR Register */ +#define TEMT 0x40 +#define THRE 0x20 +#define BI 0x10 +#define FE 0x08 +#define PE 0x04 +#define OE 0x02 +#define DR 0x01 + +#define TEMP_P 0x06 +#define THRE_P 0x05 +#define BI_P 0x04 +#define FE_P 0x03 +#define PE_P 0x02 +#define OE_P 0x01 +#define DR_P 0x00 + +/* UART_IER Register */ +#define ELSI 0x04 +#define ETBEI 0x02 +#define ERBFI 0x01 + +#define ELSI_P 0x02 +#define ETBEI_P 0x01 +#define ERBFI_P 0x00 + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define NINT 0x01 +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 +#define NINT_P 0x00 + +/* UART_GCTL Register */ +#define FFE 0x20 +#define FPE 0x10 +#define RPOLC 0x08 +#define TPOLC 0x04 +#define IREN 0x02 +#define UCEN 0x01 + +#define FFE_P 0x05 +#define FPE_P 0x04 +#define RPOLC_P 0x03 +#define TPOLC_P 0x02 +#define IREN_P 0x01 +#define UCEN_P 0x00 + +/* + * SERIAL PORT MASKS + */ +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks */ +#define SLEN 0x001F /*TX Word Length */ +#define TXSE 0x0100 /*TX Secondary Enable */ +#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /*TX Right-First Data Order */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define RULAW 0x0008 /* u-Law enable */ +#define RALAW 0x000C /* A-Law enable */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN 0x001F /* RX Word Length */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* RX FIFO Not Empty Status */ +#define RUVF 0x0002 /* RX Underflow Status */ +#define ROVF 0x0004 /* RX Overflow Status */ +#define TXF 0x0008 /* TX FIFO Full Status */ +#define TUVF 0x0010 /* TX Underflow Status */ +#define TOVF 0x0020 /* TX Overflow Status */ +#define TXHRE 0x0040 /* TX Hold Register Empty */ + +/* SPORTx_MCMC1 Masks */ +#define WSIZE 0x0000F000 /* Multichannel Window Size Field */ +#define WOFF 0x000003FF /* /Multichannel Window Offset Field */ + +/* SPORTx_MCMC2 Masks */ +#define MCCRM 0x00000003 /* Multichannel Clock Recovery Mode */ +#define MCDTXPE 0x00000004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /* Multichannel Frame Delay */ + +/* + * PARALLEL PERIPHERAL INTERFACE (PPI) MASKS + */ + +/* PPI_CONTROL Masks */ +#define PORT_EN 0x00000001 /* PPI Port Enable */ +#define PORT_DIR 0x00000002 /* PPI Port Direction */ +#define XFR_TYPE 0x0000000C /* PPI Transfer Type */ +#define PORT_CFG 0x00000030 /* PPI Port Configuration */ +#define FLD_SEL 0x00000040 /* PPI Active Field Select */ +#define PACK_EN 0x00000080 /* PPI Packing Mode */ +#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x00003800 /* PPI Data Length */ +#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ +#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#define POL 0x0000C000 /* PPI Signal Polarities */ + +/* PPI_STATUS Masks */ +#define FLD 0x00000400 /* Field Indicator */ +#define FT_ERR 0x00000800 /* Frame Track Error */ +#define OVR 0x00001000 /* FIFO Overflow Error */ +#define UNDR 0x00002000 /* FIFO Underrun Error */ +#define ERR_DET 0x00004000 /* Error Detected Indicator */ +#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ + +/* + * DMA CONTROLLER MASKS + */ + +/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x00000001 /* Channel Enable */ +#define WNR 0x00000002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ +#define DMA2D 0x00000010 /* 2D/1D* Mode */ +#define RESTART 0x00000020 /* Restart */ +#define DI_SEL 0x00000040 /* Data Interrupt Select */ +#define DI_EN 0x00000080 /* Data Interrupt Enable */ +#define NDSIZE 0x00000900 /* Next Descriptor Size */ +#define FLOW 0x00007000 /* Flow Control */ + +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ +#define DMA_DONE 0x00000001 /* DMA Done Indicator */ +#define DMA_ERR 0x00000002 /* DMA Error Indicator */ +#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ +#define DMA_RUN 0x00000008 /* DMA Running Indicator */ + +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +#define CTYPE 0x00000040 /* DMA Channel Type Indicator */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ +#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ +#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ +#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ +#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ +#define PMAP 0x00007000 /* DMA Peripheral Map Field */ + +/* + * GENERAL PURPOSE TIMER MASKS + */ + +/* PWM Timer bit definitions */ + +/* TIMER_ENABLE Register */ +#define TIMEN0 0x0001 +#define TIMEN1 0x0002 +#define TIMEN2 0x0004 + +#define TIMEN0_P 0x00 +#define TIMEN1_P 0x01 +#define TIMEN2_P 0x02 + +/* TIMER_DISABLE Register */ +#define TIMDIS0 0x0001 +#define TIMDIS1 0x0002 +#define TIMDIS2 0x0004 + +#define TIMDIS0_P 0x00 +#define TIMDIS1_P 0x01 +#define TIMDIS2_P 0x02 + +/* TIMER_STATUS Register */ +#define TIMIL0 0x0001 +#define TIMIL1 0x0002 +#define TIMIL2 0x0004 +#define TOVL_ERR0 0x0010 +#define TOVL_ERR1 0x0020 +#define TOVL_ERR2 0x0040 +#define TRUN0 0x1000 +#define TRUN1 0x2000 +#define TRUN2 0x4000 + +#define TIMIL0_P 0x00 +#define TIMIL1_P 0x01 +#define TIMIL2_P 0x02 +#define TOVL_ERR0_P 0x04 +#define TOVL_ERR1_P 0x05 +#define TOVL_ERR2_P 0x06 +#define TRUN0_P 0x0C +#define TRUN1_P 0x0D +#define TRUN2_P 0x0E + +/* TIMERx_CONFIG Registers */ +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 +#define PULSE_HI 0x0004 +#define PERIOD_CNT 0x0008 +#define IRQ_ENA 0x0010 +#define TIN_SEL 0x0020 +#define OUT_DIS 0x0040 +#define CLK_SEL 0x0080 +#define TOGGLE_HI 0x0100 +#define EMU_RUN 0x0200 +#define ERR_TYP(x) ((x & 0x03) << 14) + +#define TMODE_P0 0x00 +#define TMODE_P1 0x01 +#define PULSE_HI_P 0x02 +#define PERIOD_CNT_P 0x03 +#define IRQ_ENA_P 0x04 +#define TIN_SEL_P 0x05 +#define OUT_DIS_P 0x06 +#define CLK_SEL_P 0x07 +#define TOGGLE_HI_P 0x08 +#define EMU_RUN_P 0x09 +#define ERR_TYP_P0 0x0E +#define ERR_TYP_P1 0x0F + +/* + * PROGRAMMABLE FLAG MASKS + */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ +#define PF0_P 0 +#define PF1_P 1 +#define PF2_P 2 +#define PF3_P 3 +#define PF4_P 4 +#define PF5_P 5 +#define PF6_P 6 +#define PF7_P 7 +#define PF8_P 8 +#define PF9_P 9 +#define PF10_P 10 +#define PF11_P 11 +#define PF12_P 12 +#define PF13_P 13 +#define PF14_P 14 +#define PF15_P 15 + +/* + * SERIAL PERIPHERAL INTERFACE (SPI) MASKS + */ + +/* SPI_CTL Masks */ +#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ +#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ +#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ +#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ +#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ +#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ +#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ +#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ +#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ +#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ +#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ + +/* SPI_FLG Masks */ +#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_FLG Bit Positions */ +#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_STAT Masks */ +#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ +#define MODF 0x00000002 /* Set(=1)in a master device when some other device tries to become master */ +#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ +#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ +#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ +#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ +#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ + +/* + * ASYNCHRONOUS MEMORY CONTROLLER MASKS + */ + +/* AMGCTL Masks */ +#define AMCKEN 0x00000001 /* Enable CLKOUT */ +#define AMBEN_B0 0x00000002 /* Enable Asynchronous Memory Bank 0 only */ +#define AMBEN_B0_B1 0x00000004 /* Enable Asynchronous Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x00000006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x00000008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ + +/* AMGCTL Bit Positions */ +#define AMCKEN_P 0x00000000 /* Enable CLKOUT */ +#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ +#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ +#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ + +/* AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ +#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ +#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ +#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ +#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ +#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ +#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ +#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ +#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ +#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ +#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ +#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ +#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ +#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ +#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ +#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ +#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ +#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ +#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ +#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ +#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ +#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ + +/* AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ +#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ +#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ +#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ +#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ +#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ +#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ +#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ +#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ +#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ +#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ +#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ +#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ +#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ + +/* + * SDRAM CONTROLLER MASKS + */ + +/* SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ +#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ +#define PFE 0x00000010 /* Enable SDRAM prefetch */ +#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-up start delay */ +#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ +#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ +#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ +#define EBUFE 0x02000000 /* Enable external buffering timing */ +#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ +#define EMREN 0x10000000 /* Extended mode register enable */ +#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ +#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x00000001 /* Enable SDRAM external bank */ +#define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x00000001 /* SDRAM controller is idle */ +#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ +#define SDPUA 0x00000004 /* SDRAM power up active */ +#define SDRS 0x00000008 /* SDRAM is in reset state */ +#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ +#define BGSTAT 0x00000020 /* Bus granted */ + +#endif /* _DEF_BF532_H */ diff --git a/include/asm-blackfin/cpu/defBF533.h b/include/asm-blackfin/cpu/defBF533.h new file mode 100644 index 00000000000..90e50afa7fc --- /dev/null +++ b/include/asm-blackfin/cpu/defBF533.h @@ -0,0 +1,24 @@ +/* + * defBF533.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _DEFBF533_H +#define _DEFBF533_H + +#include <asm/cpu/defBF532.h> + +#endif /* _DEFBF533_H */ diff --git a/include/asm-blackfin/cpu/defBF533_extn.h b/include/asm-blackfin/cpu/defBF533_extn.h new file mode 100644 index 00000000000..a9a1c7ccbd6 --- /dev/null +++ b/include/asm-blackfin/cpu/defBF533_extn.h @@ -0,0 +1,76 @@ +/* + * defBF533_extn.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _DEF_BF533_EXTN_H +#define _DEF_BF533_EXTN_H + +#define OFFSET_( x ) ((x) & 0x0000FFFF) /* define macro for offset */ +/* Delay inserted for PLL transition */ +#define DELAY 0x1000 + +#define L1_ISRAM 0xFFA00000 +#define L1_ISRAM_END 0xFFA10000 +#define DATA_BANKA_SRAM 0xFF800000 +#define DATA_BANKA_SRAM_END 0xFF808000 +#define DATA_BANKB_SRAM 0xFF900000 +#define DATA_BANKB_SRAM_END 0xFF908000 +#define SYSMMR_BASE 0xFFC00000 +#define WDSIZE16 0x00000004 + +/* Event Vector Table Address */ +#define EVT_EMULATION_ADDR 0xffe02000 +#define EVT_RESET_ADDR 0xffe02004 +#define EVT_NMI_ADDR 0xffe02008 +#define EVT_EXCEPTION_ADDR 0xffe0200c +#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010 +#define EVT_HARDWARE_ERROR_ADDR 0xffe02014 +#define EVT_TIMER_ADDR 0xffe02018 +#define EVT_IVG7_ADDR 0xffe0201c +#define EVT_IVG8_ADDR 0xffe02020 +#define EVT_IVG9_ADDR 0xffe02024 +#define EVT_IVG10_ADDR 0xffe02028 +#define EVT_IVG11_ADDR 0xffe0202c +#define EVT_IVG12_ADDR 0xffe02030 +#define EVT_IVG13_ADDR 0xffe02034 +#define EVT_IVG14_ADDR 0xffe02038 +#define EVT_IVG15_ADDR 0xffe0203c +#define EVT_OVERRIDE_ADDR 0xffe02100 + +/* IMASK Bit values */ +#define IVG15_POS 0x00008000 +#define IVG14_POS 0x00004000 +#define IVG13_POS 0x00002000 +#define IVG12_POS 0x00001000 +#define IVG11_POS 0x00000800 +#define IVG10_POS 0x00000400 +#define IVG9_POS 0x00000200 +#define IVG8_POS 0x00000100 +#define IVG7_POS 0x00000080 +#define IVGTMR_POS 0x00000040 +#define IVGHW_POS 0x00000020 + +#define WDOG_TMR_DISABLE (0xAD << 4) +#define ICTL_RST 0x00000000 +#define ICTL_NMI 0x00000002 +#define ICTL_GP 0x00000004 +#define ICTL_DISABLE 0x00000003 + +/* Watch Dog timer values setup */ +#define WATCHDOG_DISABLE WDOG_TMR_DISABLE | ICTL_DISABLE + +#endif /* _DEF_BF533_EXTN_H */ diff --git a/include/asm-blackfin/cpu/def_LPBlackfin.h b/include/asm-blackfin/cpu/def_LPBlackfin.h new file mode 100644 index 00000000000..9ac78c836a6 --- /dev/null +++ b/include/asm-blackfin/cpu/def_LPBlackfin.h @@ -0,0 +1,445 @@ +/* + * def_LPBlackfin.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +/* LP Blackfin CORE REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */ + +#ifndef _DEF_LPBLACKFIN_H +#define _DEF_LPBLACKFIN_H + +/* + * #if !defined(__ADSPLPBLACKFIN__) + * #warning def_LPBlackfin.h should only be included for 532 compatible chips. + * #endif + */ + +#define MK_BMSK_( x ) (1<<x) /* Make a bit mask from a bit position */ + +/* + * System Register Bits + */ + +/* + * ASTAT register + */ + +/* definitions of ASTAT bit positions */ +#define ASTAT_AZ_P 0x00000000 /* Result of last ALU0 or shifter operation is zero */ +#define ASTAT_AN_P 0x00000001 /* Result of last ALU0 or shifter operation is negative */ +#define ASTAT_CC_P 0x00000005 /* Condition Code, used for holding comparison results */ +#define ASTAT_AQ_P 0x00000006 /* Quotient Bit */ +#define ASTAT_RND_MOD_P 0x00000008 /* Rounding mode, set for biased, clear for unbiased */ +#define ASTAT_AC0_P 0x0000000C /* Result of last ALU0 operation generated a carry */ +#define ASTAT_AC0_COPY_P 0x00000002 /* Result of last ALU0 operation generated a carry */ +#define ASTAT_AC1_P 0x0000000D /* Result of last ALU1 operation generated a carry */ +#define ASTAT_AV0_P 0x00000010 /* Result of last ALU0 or MAC0 operation overflowed, sticky for MAC */ +#define ASTAT_AV0S_P 0x00000011 /* Sticky version of ASTAT_AV0 */ +#define ASTAT_AV1_P 0x00000012 /* Result of last MAC1 operation overflowed, sticky for MAC */ +#define ASTAT_AV1S_P 0x00000013 /* Sticky version of ASTAT_AV1 */ +#define ASTAT_V_P 0x00000018 /* Result of last ALU0 or MAC0 operation overflowed */ +#define ASTAT_V_COPY_P 0x00000003 /* Result of last ALU0 or MAC0 operation overflowed */ +#define ASTAT_VS_P 0x00000019 /* Sticky version of ASTAT_V */ + +/* ** Masks */ +#define ASTAT_AZ MK_BMSK_(ASTAT_AZ_P) /* Result of last ALU0 or shifter operation is zero */ +#define ASTAT_AN MK_BMSK_(ASTAT_AN_P) /* Result of last ALU0 or shifter operation is negative */ +#define ASTAT_AC0 MK_BMSK_(ASTAT_AC0_P) /* Result of last ALU0 operation generated a carry */ +#define ASTAT_AC0_COPY MK_BMSK_(ASTAT_AC0_COPY_P) /* Result of last ALU0 operation generated a carry */ +#define ASTAT_AC1 MK_BMSK_(ASTAT_AC1_P) /* Result of last ALU0 operation generated a carry */ +#define ASTAT_AV0 MK_BMSK_(ASTAT_AV0_P) /* Result of last ALU0 or MAC0 operation overflowed, sticky for MAC */ +#define ASTAT_AV1 MK_BMSK_(ASTAT_AV1_P) /* Result of last MAC1 operation overflowed, sticky for MAC */ +#define ASTAT_CC MK_BMSK_(ASTAT_CC_P) /* Condition Code, used for holding comparison results */ +#define ASTAT_AQ MK_BMSK_(ASTAT_AQ_P) /* Quotient Bit */ +#define ASTAT_RND_MOD MK_BMSK_(ASTAT_RND_MOD_P) /* Rounding mode, set for biased, clear for unbiased */ +#define ASTAT_V MK_BMSK_(ASTAT_V_P) /* Overflow Bit */ +#define ASTAT_V_COPY MK_BMSK_(ASTAT_V_COPY_P) /* Overflow Bit */ + +/* + * SEQSTAT register + */ + +/* ** Bit Positions */ +#define SEQSTAT_EXCAUSE0_P 0x00000000 /* Last exception cause bit 0 */ +#define SEQSTAT_EXCAUSE1_P 0x00000001 /* Last exception cause bit 1 */ +#define SEQSTAT_EXCAUSE2_P 0x00000002 /* Last exception cause bit 2 */ +#define SEQSTAT_EXCAUSE3_P 0x00000003 /* Last exception cause bit 3 */ +#define SEQSTAT_EXCAUSE4_P 0x00000004 /* Last exception cause bit 4 */ +#define SEQSTAT_EXCAUSE5_P 0x00000005 /* Last exception cause bit 5 */ +#define SEQSTAT_IDLE_REQ_P 0x0000000C /* Pending idle mode request, set by IDLE instruction */ +#define SEQSTAT_SFTRESET_P 0x0000000D /* Indicates whether the last reset was a software reset (=1) */ +#define SEQSTAT_HWERRCAUSE0_P 0x0000000E /* Last hw error cause bit 0 */ +#define SEQSTAT_HWERRCAUSE1_P 0x0000000F /* Last hw error cause bit 1 */ +#define SEQSTAT_HWERRCAUSE2_P 0x00000010 /* Last hw error cause bit 2 */ +#define SEQSTAT_HWERRCAUSE3_P 0x00000011 /* Last hw error cause bit 3 */ +#define SEQSTAT_HWERRCAUSE4_P 0x00000012 /* Last hw error cause bit 4 */ +#define SEQSTAT_HWERRCAUSE5_P 0x00000013 /* Last hw error cause bit 5 */ +#define SEQSTAT_HWERRCAUSE6_P 0x00000014 /* Last hw error cause bit 6 */ +#define SEQSTAT_HWERRCAUSE7_P 0x00000015 /* Last hw error cause bit 7 */ + +/* ** Masks */ +/* Exception cause */ +#define SEQSTAT_EXCAUSE MK_BMSK_(SEQSTAT_EXCAUSE0_P ) | \ + MK_BMSK_(SEQSTAT_EXCAUSE1_P ) | \ + MK_BMSK_(SEQSTAT_EXCAUSE2_P ) | \ + MK_BMSK_(SEQSTAT_EXCAUSE3_P ) | \ + MK_BMSK_(SEQSTAT_EXCAUSE4_P ) | \ + MK_BMSK_(SEQSTAT_EXCAUSE5_P ) | \ + 0 + +/* Indicates whether the last reset was a software reset (=1) */ +#define SEQSTAT_SFTRESET MK_BMSK_(SEQSTAT_SFTRESET_P ) + +/* Last hw error cause */ +#define SEQSTAT_HWERRCAUSE MK_BMSK_(SEQSTAT_HWERRCAUSE0_P ) | \ + MK_BMSK_(SEQSTAT_HWERRCAUSE1_P ) | \ + MK_BMSK_(SEQSTAT_HWERRCAUSE2_P ) | \ + MK_BMSK_(SEQSTAT_HWERRCAUSE3_P ) | \ + MK_BMSK_(SEQSTAT_HWERRCAUSE4_P ) | \ + 0 + +/* + * SYSCFG register + */ + +/* ** Bit Positions */ +#define SYSCFG_SSSTEP_P 0x00000000 /* Supervisor single step, when set it forces an exception for each instruction executed */ +#define SYSCFG_CCEN_P 0x00000001 /* Enable cycle counter (=1) */ +#define SYSCFG_SNEN_P 0x00000002 /* Self nesting Interrupt Enable */ + +/* ** Masks */ +#define SYSCFG_SSSTEP MK_BMSK_(SYSCFG_SSSTEP_P) /* Supervisor single step, when set it forces an exception for each instruction executed */ +#define SYSCFG_CCEN MK_BMSK_(SYSCFG_CCEN_P) /* Enable cycle counter (=1) */ +#define SYSCFG_SNEN MK_BMSK_(SYSCFG_SNEN_P /* Self Nesting Interrupt Enable */ + +/* Backward-compatibility for typos in prior releases */ +#define SYSCFG_SSSSTEP SYSCFG_SSSTEP +#define SYSCFG_CCCEN SYSCFG_CCEN + +/* + * Core MMR Register Map + */ + +/* Data Cache & SRAM Memory (0xFFE00000 - 0xFFE00404) */ +#define SRAM_BASE_ADDRESS 0xFFE00000 /* SRAM Base Address Register */ +#define DMEM_CONTROL 0xFFE00004 /* Data memory control */ +#define DCPLB_STATUS 0xFFE00008 /* Data Cache Programmable Look-Aside Buffer Status */ +#define DCPLB_FAULT_STATUS 0xFFE00008 /* "" (older define) */ +#define DCPLB_FAULT_ADDR 0xFFE0000C /* Data Cache Programmable Look-Aside Buffer Fault Address */ +#define DCPLB_ADDR0 0xFFE00100 /* Data Cache Protection Lookaside Buffer 0 */ +#define DCPLB_ADDR1 0xFFE00104 /* Data Cache Protection Lookaside Buffer 1 */ +#define DCPLB_ADDR2 0xFFE00108 /* Data Cache Protection Lookaside Buffer 2 */ +#define DCPLB_ADDR3 0xFFE0010C /* Data Cacheability Protection Lookaside Buffer 3 */ +#define DCPLB_ADDR4 0xFFE00110 /* Data Cacheability Protection Lookaside Buffer 4 */ +#define DCPLB_ADDR5 0xFFE00114 /* Data Cacheability Protection Lookaside Buffer 5 */ +#define DCPLB_ADDR6 0xFFE00118 /* Data Cacheability Protection Lookaside Buffer 6 */ +#define DCPLB_ADDR7 0xFFE0011C /* Data Cacheability Protection Lookaside Buffer 7 */ +#define DCPLB_ADDR8 0xFFE00120 /* Data Cacheability Protection Lookaside Buffer 8 */ +#define DCPLB_ADDR9 0xFFE00124 /* Data Cacheability Protection Lookaside Buffer 9 */ +#define DCPLB_ADDR10 0xFFE00128 /* Data Cacheability Protection Lookaside Buffer 10 */ +#define DCPLB_ADDR11 0xFFE0012C /* Data Cacheability Protection Lookaside Buffer 11 */ +#define DCPLB_ADDR12 0xFFE00130 /* Data Cacheability Protection Lookaside Buffer 12 */ +#define DCPLB_ADDR13 0xFFE00134 /* Data Cacheability Protection Lookaside Buffer 13 */ +#define DCPLB_ADDR14 0xFFE00138 /* Data Cacheability Protection Lookaside Buffer 14 */ +#define DCPLB_ADDR15 0xFFE0013C /* Data Cacheability Protection Lookaside Buffer 15 */ +#define DCPLB_DATA0 0xFFE00200 /* Data Cache 0 Status */ +#define DCPLB_DATA1 0xFFE00204 /* Data Cache 1 Status */ +#define DCPLB_DATA2 0xFFE00208 /* Data Cache 2 Status */ +#define DCPLB_DATA3 0xFFE0020C /* Data Cache 3 Status */ +#define DCPLB_DATA4 0xFFE00210 /* Data Cache 4 Status */ +#define DCPLB_DATA5 0xFFE00214 /* Data Cache 5 Status */ +#define DCPLB_DATA6 0xFFE00218 /* Data Cache 6 Status */ +#define DCPLB_DATA7 0xFFE0021C /* Data Cache 7 Status */ +#define DCPLB_DATA8 0xFFE00220 /* Data Cache 8 Status */ +#define DCPLB_DATA9 0xFFE00224 /* Data Cache 9 Status */ +#define DCPLB_DATA10 0xFFE00228 /* Data Cache 10 Status */ +#define DCPLB_DATA11 0xFFE0022C /* Data Cache 11 Status */ +#define DCPLB_DATA12 0xFFE00230 /* Data Cache 12 Status */ +#define DCPLB_DATA13 0xFFE00234 /* Data Cache 13 Status */ +#define DCPLB_DATA14 0xFFE00238 /* Data Cache 14 Status */ +#define DCPLB_DATA15 0xFFE0023C /* Data Cache 15 Status */ +#define DTEST_COMMAND 0xFFE00300 /* Data Test Command Register */ +#define DTEST_DATA0 0xFFE00400 /* Data Test Data Register */ +#define DTEST_DATA1 0xFFE00404 /* Data Test Data Register */ + +/* Instruction Cache & SRAM Memory (0xFFE01004 - 0xFFE01404) */ +#define IMEM_CONTROL 0xFFE01004 /* Instruction Memory Control */ +#define ICPLB_STATUS 0xFFE01008 /* Instruction Cache miss status */ +#define CODE_FAULT_STATUS 0xFFE01008 /* "" (older define) */ +#define ICPLB_FAULT_ADDR 0xFFE0100C /* Instruction Cache miss address */ +#define CODE_FAULT_ADDR 0xFFE0100C /* "" (older define) */ +#define ICPLB_ADDR0 0xFFE01100 /* Instruction Cacheability Protection Lookaside Buffer 0 */ +#define ICPLB_ADDR1 0xFFE01104 /* Instruction Cacheability Protection Lookaside Buffer 1 */ +#define ICPLB_ADDR2 0xFFE01108 /* Instruction Cacheability Protection Lookaside Buffer 2 */ +#define ICPLB_ADDR3 0xFFE0110C /* Instruction Cacheability Protection Lookaside Buffer 3 */ +#define ICPLB_ADDR4 0xFFE01110 /* Instruction Cacheability Protection Lookaside Buffer 4 */ +#define ICPLB_ADDR5 0xFFE01114 /* Instruction Cacheability Protection Lookaside Buffer 5 */ +#define ICPLB_ADDR6 0xFFE01118 /* Instruction Cacheability Protection Lookaside Buffer 6 */ +#define ICPLB_ADDR7 0xFFE0111C /* Instruction Cacheability Protection Lookaside Buffer 7 */ +#define ICPLB_ADDR8 0xFFE01120 /* Instruction Cacheability Protection Lookaside Buffer 8 */ +#define ICPLB_ADDR9 0xFFE01124 /* Instruction Cacheability Protection Lookaside Buffer 9 */ +#define ICPLB_ADDR10 0xFFE01128 /* Instruction Cacheability Protection Lookaside Buffer 10 */ +#define ICPLB_ADDR11 0xFFE0112C /* Instruction Cacheability Protection Lookaside Buffer 11 */ +#define ICPLB_ADDR12 0xFFE01130 /* Instruction Cacheability Protection Lookaside Buffer 12 */ +#define ICPLB_ADDR13 0xFFE01134 /* Instruction Cacheability Protection Lookaside Buffer 13 */ +#define ICPLB_ADDR14 0xFFE01138 /* Instruction Cacheability Protection Lookaside Buffer 14 */ +#define ICPLB_ADDR15 0xFFE0113C /* Instruction Cacheability Protection Lookaside Buffer 15 */ +#define ICPLB_DATA0 0xFFE01200 /* Instruction Cache 0 Status */ +#define ICPLB_DATA1 0xFFE01204 /* Instruction Cache 1 Status */ +#define ICPLB_DATA2 0xFFE01208 /* Instruction Cache 2 Status */ +#define ICPLB_DATA3 0xFFE0120C /* Instruction Cache 3 Status */ +#define ICPLB_DATA4 0xFFE01210 /* Instruction Cache 4 Status */ +#define ICPLB_DATA5 0xFFE01214 /* Instruction Cache 5 Status */ +#define ICPLB_DATA6 0xFFE01218 /* Instruction Cache 6 Status */ +#define ICPLB_DATA7 0xFFE0121C /* Instruction Cache 7 Status */ +#define ICPLB_DATA8 0xFFE01220 /* Instruction Cache 8 Status */ +#define ICPLB_DATA9 0xFFE01224 /* Instruction Cache 9 Status */ +#define ICPLB_DATA10 0xFFE01228 /* Instruction Cache 10 Status */ +#define ICPLB_DATA11 0xFFE0122C /* Instruction Cache 11 Status */ +#define ICPLB_DATA12 0xFFE01230 /* Instruction Cache 12 Status */ +#define ICPLB_DATA13 0xFFE01234 /* Instruction Cache 13 Status */ +#define ICPLB_DATA14 0xFFE01238 /* Instruction Cache 14 Status */ +#define ICPLB_DATA15 0xFFE0123C /* Instruction Cache 15 Status */ +#define ITEST_COMMAND 0xFFE01300 /* Instruction Test Command Register */ +#define ITEST_DATA0 0xFFE01400 /* Instruction Test Data Register */ +#define ITEST_DATA1 0xFFE01404 /* Instruction Test Data Register */ + +/* Event/Interrupt Controller Registers (0xFFE02000 - 0xFFE02110) */ +#define EVT0 0xFFE02000 /* Event Vector 0 ESR Address */ +#define EVT1 0xFFE02004 /* Event Vector 1 ESR Address */ +#define EVT2 0xFFE02008 /* Event Vector 2 ESR Address */ +#define EVT3 0xFFE0200C /* Event Vector 3 ESR Address */ +#define EVT4 0xFFE02010 /* Event Vector 4 ESR Address */ +#define EVT5 0xFFE02014 /* Event Vector 5 ESR Address */ +#define EVT6 0xFFE02018 /* Event Vector 6 ESR Address */ +#define EVT7 0xFFE0201C /* Event Vector 7 ESR Address */ +#define EVT8 0xFFE02020 /* Event Vector 8 ESR Address */ +#define EVT9 0xFFE02024 /* Event Vector 9 ESR Address */ +#define EVT10 0xFFE02028 /* Event Vector 10 ESR Address */ +#define EVT11 0xFFE0202C /* Event Vector 11 ESR Address */ +#define EVT12 0xFFE02030 /* Event Vector 12 ESR Address */ +#define EVT13 0xFFE02034 /* Event Vector 13 ESR Address */ +#define EVT14 0xFFE02038 /* Event Vector 14 ESR Address */ +#define EVT15 0xFFE0203C /* Event Vector 15 ESR Address */ +#define IMASK 0xFFE02104 /* Interrupt Mask Register */ +#define IPEND 0xFFE02108 /* Interrupt Pending Register */ +#define ILAT 0xFFE0210C /* Interrupt Latch Register */ +#define IPRIO 0xFFE02110 /* Core Interrupt Priority Register */ + +/* Core Timer Registers (0xFFE03000 - 0xFFE0300C) */ +#define TCNTL 0xFFE03000 /* Core Timer Control Register */ +#define TPERIOD 0xFFE03004 /* Core Timer Period Register */ +#define TSCALE 0xFFE03008 /* Core Timer Scale Register */ +#define TCOUNT 0xFFE0300C /* Core Timer Count Register */ + +/* Debug/MP/Emulation Registers (0xFFE05000 - 0xFFE05008) */ +#define DSPID 0xFFE05000 /* DSP Processor ID Register for MP implementations */ +#define DBGSTAT 0xFFE05008 /* Debug Status Register */ + +/* Trace Buffer Registers (0xFFE06000 - 0xFFE06100) */ +#define TBUFCTL 0xFFE06000 /* Trace Buffer Control Register */ +#define TBUFSTAT 0xFFE06004 /* Trace Buffer Status Register */ +#define TBUF 0xFFE06100 /* Trace Buffer */ + +/* Watchpoint Control Registers (0xFFE07000 - 0xFFE07200) */ +#define WPIACTL 0xFFE07000 /* Watchpoint Instruction Address Control Register */ +#define WPIA0 0xFFE07040 /* Watchpoint Instruction Address Register 0 */ +#define WPIA1 0xFFE07044 /* Watchpoint Instruction Address Register 1 */ +#define WPIA2 0xFFE07048 /* Watchpoint Instruction Address Register 2 */ +#define WPIA3 0xFFE0704C /* Watchpoint Instruction Address Register 3 */ +#define WPIA4 0xFFE07050 /* Watchpoint Instruction Address Register 4 */ +#define WPIA5 0xFFE07054 /* Watchpoint Instruction Address Register 5 */ +#define WPIACNT0 0xFFE07080 /* Watchpoint Instruction Address Count Register 0 */ +#define WPIACNT1 0xFFE07084 /* Watchpoint Instruction Address Count Register 1 */ +#define WPIACNT2 0xFFE07088 /* Watchpoint Instruction Address Count Register 2 */ +#define WPIACNT3 0xFFE0708C /* Watchpoint Instruction Address Count Register 3 */ +#define WPIACNT4 0xFFE07090 /* Watchpoint Instruction Address Count Register 4 */ +#define WPIACNT5 0xFFE07094 /* Watchpoint Instruction Address Count Register 5 */ +#define WPDACTL 0xFFE07100 /* Watchpoint Data Address Control Register */ +#define WPDA0 0xFFE07140 /* Watchpoint Data Address Register 0 */ +#define WPDA1 0xFFE07144 /* Watchpoint Data Address Register 1 */ +#define WPDACNT0 0xFFE07180 /* Watchpoint Data Address Count Value Register 0 */ +#define WPDACNT1 0xFFE07184 /* Watchpoint Data Address Count Value Register 1 */ +#define WPSTAT 0xFFE07200 /* Watchpoint Status Register */ + +/* Performance Monitor Registers (0xFFE08000 - 0xFFE08104) */ +#define PFCTL 0xFFE08000 /* Performance Monitor Control Register */ +#define PFCNTR0 0xFFE08100 /* Performance Monitor Counter Register 0 */ +#define PFCNTR1 0xFFE08104 /* Performance Monitor Counter Register 1 */ + +/* + * Core MMR Register Bits + */ + +/* + * EVT registers (ILAT, IMASK, and IPEND). + */ + +/* ** Bit Positions */ +#define EVT_EMU_P 0x00000000 /* Emulator interrupt bit position */ +#define EVT_RST_P 0x00000001 /* Reset interrupt bit position */ +#define EVT_NMI_P 0x00000002 /* Non Maskable interrupt bit position */ +#define EVT_EVX_P 0x00000003 /* Exception bit position */ +#define EVT_IRPTEN_P 0x00000004 /* Global interrupt enable bit position */ +#define EVT_IVHW_P 0x00000005 /* Hardware Error interrupt bit position */ +#define EVT_IVTMR_P 0x00000006 /* Timer interrupt bit position */ +#define EVT_IVG7_P 0x00000007 /* IVG7 interrupt bit position */ +#define EVT_IVG8_P 0x00000008 /* IVG8 interrupt bit position */ +#define EVT_IVG9_P 0x00000009 /* IVG9 interrupt bit position */ +#define EVT_IVG10_P 0x0000000a /* IVG10 interrupt bit position */ +#define EVT_IVG11_P 0x0000000b /* IVG11 interrupt bit position */ +#define EVT_IVG12_P 0x0000000c /* IVG12 interrupt bit position */ +#define EVT_IVG13_P 0x0000000d /* IVG13 interrupt bit position */ +#define EVT_IVG14_P 0x0000000e /* IVG14 interrupt bit position */ +#define EVT_IVG15_P 0x0000000f /* IVG15 interrupt bit position */ + +/* ** Masks */ +#define EVT_EMU MK_BMSK_(EVT_EMU_P ) /* Emulator interrupt mask */ +#define EVT_RST MK_BMSK_(EVT_RST_P ) /* Reset interrupt mask */ +#define EVT_NMI MK_BMSK_(EVT_NMI_P ) /* Non Maskable interrupt mask */ +#define EVT_EVX MK_BMSK_(EVT_EVX_P ) /* Exception mask */ +#define EVT_IRPTEN MK_BMSK_(EVT_IRPTEN_P) /* Global interrupt enable mask */ +#define EVT_IVHW MK_BMSK_(EVT_IVHW_P ) /* Hardware Error interrupt mask */ +#define EVT_IVTMR MK_BMSK_(EVT_IVTMR_P ) /* Timer interrupt mask */ +#define EVT_IVG7 MK_BMSK_(EVT_IVG7_P ) /* IVG7 interrupt mask */ +#define EVT_IVG8 MK_BMSK_(EVT_IVG8_P ) /* IVG8 interrupt mask */ +#define EVT_IVG9 MK_BMSK_(EVT_IVG9_P ) /* IVG9 interrupt mask */ +#define EVT_IVG10 MK_BMSK_(EVT_IVG10_P ) /* IVG10 interrupt mask */ +#define EVT_IVG11 MK_BMSK_(EVT_IVG11_P ) /* IVG11 interrupt mask */ +#define EVT_IVG12 MK_BMSK_(EVT_IVG12_P ) /* IVG12 interrupt mask */ +#define EVT_IVG13 MK_BMSK_(EVT_IVG13_P ) /* IVG13 interrupt mask */ +#define EVT_IVG14 MK_BMSK_(EVT_IVG14_P ) /* IVG14 interrupt mask */ +#define EVT_IVG15 MK_BMSK_(EVT_IVG15_P ) /* IVG15 interrupt mask */ + +/* + * DMEM_CONTROL Register + */ + +/* ** Bit Positions */ +#define ENDM_P 0x00 /* (doesn't really exist) Enable Data Memory L1 */ +#define DMCTL_ENDM_P 0x00 /* "" (older define) */ +#define DMC0_P 0x01 /* Data Memory Configuration, 00 - A SRAM, B SRAM */ +#define DMCTL_DMC0_P 0x01 /* "" (older define) */ +#define DMC1_P 0x02 /* Data Memory Configuration, 10 - A SRAM, B SRAM */ +#define DMCTL_DMC1_P 0x02 /* "" (older define) */ +#define DMC2_P 0x03 /* Data Memory Configuration, 11 - A CACHE, B CACHE */ +#define DMCTL_DMC2_P 0x03 /* "" (older define) */ +#define DCBS_P 0x04 /* L1 Data Cache Bank Select */ +#define PORT_PREF0_P 0x12 /* DAG0 Port Preference */ +#define PORT_PREF1_P 0x13 /* DAG1 Port Preference */ + +/* ** Masks */ +#define ENDM 0x00000001 /* (doesn't really exist) Enable Data Memory L1 */ +#define ENDCPLB 0x00000002 /* Enable DCPLB */ +#define ASRAM_BSRAM 0x00000000 +#define ACACHE_BSRAM 0x00000008 +#define ACACHE_BCACHE 0x0000000C +#define DCBS 0x00000010 /* L1 Data Cache Bank Select */ +#define PORT_PREF0 0x00001000 /* DAG0 Port Preference */ +#define PORT_PREF1 0x00002000 /* DAG1 Port Preference */ + +/* IMEM_CONTROL Register */ +/* ** Bit Positions */ +#define ENIM_P 0x00 /* Enable L1 Code Memory */ +#define IMCTL_ENIM_P 0x00 /* "" (older define) */ +#define ENICPLB_P 0x01 /* Enable ICPLB */ +#define IMCTL_ENICPLB_P 0x01 /* "" (older define) */ +#define IMC_P 0x02 /* Enable */ +#define IMCTL_IMC_P 0x02 /* Configure L1 code memory as cache (0=SRAM) */ +#define ILOC0_P 0x03 /* Lock Way 0 */ +#define ILOC1_P 0x04 /* Lock Way 1 */ +#define ILOC2_P 0x05 /* Lock Way 2 */ +#define ILOC3_P 0x06 /* Lock Way 3 */ +#define LRUPRIORST_P 0x0D /* Least Recently Used Replacement Priority */ + +/* ** Masks */ +#define ENIM 0x00000001 /* Enable L1 Code Memory */ +#define ENICPLB 0x00000002 /* Enable ICPLB */ +#define IMC 0x00000004 /* Configure L1 code memory as cache (0=SRAM) */ +#define ILOC0 0x00000008 /* Lock Way 0 */ +#define ILOC1 0x00000010 /* Lock Way 1 */ +#define ILOC2 0x00000020 /* Lock Way 2 */ +#define ILOC3 0x00000040 /* Lock Way 3 */ +#define LRUPRIORST 0x00002000 /* Least Recently Used Replacement Priority */ + +/* TCNTL Masks */ +#define TMPWR 0x00000001 /* Timer Low Power Control, 0=low power mode, 1=active state */ +#define TMREN 0x00000002 /* Timer enable, 0=disable, 1=enable */ +#define TAUTORLD 0x00000004 /* Timer auto reload */ +#define TINT 0x00000008 /* Timer generated interrupt 0=no interrupt has been generated, 1=interrupt has been generated (sticky) */ + +/* TCNTL Bit Positions */ +#define TMPWR_P 0x00000000 /* Timer Low Power Control, 0=low power mode, 1=active state */ +#define TMREN_P 0x00000001 /* Timer enable, 0=disable, 1=enable */ +#define TAUTORLD_P 0x00000002 /* Timer auto reload */ +#define TINT_P 0x00000003 /* Timer generated interrupt 0=no interrupt has been generated, 1=interrupt has been generated (sticky) */ + +/* DCPLB_DATA and ICPLB_DATA Registers */ +/* ** Bit Positions */ +#define CPLB_VALID_P 0x00000000 /* 0=invalid entry, 1=valid entry */ +#define CPLB_LOCK_P 0x00000001 /* 0=entry may be replaced, 1=entry locked */ +#define CPLB_USER_RD_P 0x00000002 /* 0=no read access, 1=read access allowed (user mode) */ + +/* ** Masks */ +#define CPLB_VALID 0x00000001 /* 0=invalid entry, 1=valid entry */ +#define CPLB_LOCK 0x00000002 /* 0=entry may be replaced, 1=entry locked */ +#define CPLB_USER_RD 0x00000004 /* 0=no read access, 1=read access allowed (user mode) */ +#define PAGE_SIZE_1KB 0x00000000 /* 1 KB page size */ +#define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */ +#define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */ +#define PAGE_SIZE_4MB 0x00030000 /* 4 MB page size */ +#define CPLB_L1SRAM 0x00000020 /* 0=SRAM mapped in L1, 0=SRAM not mapped to L1 */ +#define CPLB_PORTPRIO 0x00000200 /* 0=low priority port, 1= high priority port */ +#define CPLB_L1_CHBL 0x00001000 /* 0=non-cacheable in L1, 1=cacheable in L1 */ + +/* ICPLB_DATA only */ +#define CPLB_LRUPRIO 0x00000100 /* 0=can be replaced by any line, 1=priority for non-replacement */ + +/* DCPLB_DATA only */ +#define CPLB_USER_WR 0x00000008 /* 0=no write access, 0=write access allowed (user mode) */ +#define CPLB_SUPV_WR 0x00000010 /* 0=no write access, 0=write access allowed (supervisor mode) */ +#define CPLB_DIRTY 0x00000080 /* 1=dirty, 0=clean */ +#define CPLB_L1_AOW 0x00008000 /* 0=do not allocate cache lines on write-through writes */ + /* 1= allocate cache lines on write-through writes. */ +#define CPLB_WT 0x00004000 /* 0=write-back, 1=write-through */ + +/* ITEST_COMMAND and DTEST_COMMAND Registers */ +/* ** Masks */ +#define TEST_READ 0x00000000 /* Read Access */ +#define TEST_WRITE 0x00000002 /* Write Access */ +#define TEST_TAG 0x00000000 /* Access TAG */ +#define TEST_DATA 0x00000004 /* Access DATA */ +#define TEST_DW0 0x00000000 /* Select Double Word 0 */ +#define TEST_DW1 0x00000008 /* Select Double Word 1 */ +#define TEST_DW2 0x00000010 /* Select Double Word 2 */ +#define TEST_DW3 0x00000018 /* Select Double Word 3 */ +#define TEST_MB0 0x00000000 /* Select Mini-Bank 0 */ +#define TEST_MB1 0x00010000 /* Select Mini-Bank 1 */ +#define TEST_MB2 0x00020000 /* Select Mini-Bank 2 */ +#define TEST_MB3 0x00030000 /* Select Mini-Bank 3 */ +#define TEST_SET(x) ((x << 5) & 0x03E0) /* Set Index 0->31 */ +#define TEST_WAY0 0x00000000 /* Access Way0 */ +#define TEST_WAY1 0x04000000 /* Access Way1 */ + +/* ** ITEST_COMMAND only */ +#define TEST_WAY2 0x08000000 /* Access Way2 */ +#define TEST_WAY3 0x0C000000 /* Access Way3 */ + +/* ** DTEST_COMMAND only */ +#define TEST_BNKSELA 0x00000000 /* Access SuperBank A */ +#define TEST_BNKSELB 0x00800000 /* Access SuperBank B */ + +#endif /* _DEF_LPBLACKFIN_H */ diff --git a/include/asm-blackfin/current.h b/include/asm-blackfin/current.h new file mode 100644 index 00000000000..108c2792a09 --- /dev/null +++ b/include/asm-blackfin/current.h @@ -0,0 +1,40 @@ +/* + * U-boot - current.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_CURRENT_H +#define _BLACKFIN_CURRENT_H +/* + * current.h + * (C) Copyright 2000, Lineo, David McCullough <davidm@lineo.com> + * + * rather than dedicate a register (as the m68k source does), we + * just keep a global, we should probably just change it all to be + * current and lose _current_task. + */ + +extern struct task_struct *_current_task; +#define get_current() _current_task +#define current _current_task + +#endif diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h new file mode 100644 index 00000000000..dbb73887efd --- /dev/null +++ b/include/asm-blackfin/delay.h @@ -0,0 +1,55 @@ +/* + * U-boot - delay.h Routines for introducing delays + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_DELAY_H +#define _BLACKFIN_DELAY_H + +/* + * Changes made by akbar.hussain@Lineo.com, for BLACKFIN + * Copyright (C) 1994 Hamish Macdonald + * + * Delay routines, using a pre-computed "loops_per_second" value. + */ + +extern __inline__ void __delay(unsigned long loops) +{ + __asm__ __volatile__("1:\t%0 += -1;\n\t" + "cc = %0 == 0;\n\t" + "if ! cc jump 1b;\n":"=d"(loops) + :"0"(loops)); +} + +/* + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ +extern __inline__ void udelay(unsigned long usecs) +{ + __delay(usecs); +} + +#endif diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h new file mode 100644 index 00000000000..607a5b8e98a --- /dev/null +++ b/include/asm-blackfin/entry.h @@ -0,0 +1,385 @@ +/* + * U-boot - entry.h Routines for context saving and restoring + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BLACKFIN_ENTRY_H +#define __BLACKFIN_ENTRY_H + +#include <linux/config.h> +#include <asm/setup.h> +#include <asm/page.h> + +/* + * Stack layout in 'ret_from_exception': + * + */ + +/* + * Register %p2 is now set to the current task throughout + * the whole kernel. + */ + +#ifdef __ASSEMBLY__ + +#define LFLUSH_I_AND_D 0x00000808 +#define LSIGTRAP 5 + +/* process bits for task_struct.flags */ +#define PF_TRACESYS_OFF 3 +#define PF_TRACESYS_BIT 5 +#define PF_PTRACED_OFF 3 +#define PF_PTRACED_BIT 4 +#define PF_DTRACE_OFF 1 +#define PF_DTRACE_BIT 5 + +#define NEW_PT_REGS + +#if defined(NEW_PT_REGS) + +#define SAVE_ALL_INT save_context_no_interrupts +#define SAVE_ALL_SYS save_context_no_interrupts +#define SAVE_CONTEXT save_context_with_interrupts + +#define RESTORE_ALL restore_context_no_interrupts +#define RESTORE_ALL_SYS restore_context_no_interrupts +#define RESTORE_CONTEXT restore_context_with_interrupts + +#else + +#define SAVE_ALL_INT save_all_int +#define SAVE_ALL_SYS save_all_sys +#define SAVE_CONTEXT save_context +#define RESTORE_ALL restore_context +#define RESTORE_CONTEXT restore_context + +#endif + +/* + * Code to save processor context. + * We even save the register which are preserved by a function call + * - r4, r5, r6, r7, p3, p4, p5 + */ +.macro save_context_with_interrupts + [--sp] = R0; + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + + [--sp] = r0; /* Skip reserved */ + [--sp] = RETS; + [--sp] = RETI; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + [--sp] = SYSCFG; + [--sp] = r0; /* Skip IPEND as well. */ +.endm + +.macro save_context_no_interrupts + [--sp] = R0; + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + + [--sp] = r0; /* Skip reserved */ + [--sp] = RETS; + r0 = RETI; + [--sp] = r0; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + [--sp] = SYSCFG; + [--sp] = r0; /* Skip IPEND as well. */ +.endm + +.macro restore_context_no_interrupts + sp += 4; + SYSCFG = [sp++]; + SEQSTAT = [sp++]; + RETE = [sp++]; + RETN = [sp++]; + RETX = [sp++]; + r0 = [sp++]; + RETI = r0; + RETS = [sp++]; + + sp += 4; + + ASTAT = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + sp += 4; + fp = [sp++]; + + ( R7 : 0, P5 : 0) = [ SP ++ ]; + sp += 4; +.endm + +.macro restore_context_with_interrupts + sp += 4; + SYSCFG = [sp++]; + SEQSTAT = [sp++]; + RETE = [sp++]; + RETN = [sp++]; + RETX = [sp++]; + RETI = [sp++]; + RETS = [sp++]; + + sp += 4; + + ASTAT = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + sp += 4; + fp = [sp++]; + + ( R7 : 0, P5 : 0) = [ SP ++ ]; + sp += 4; +.endm + +#if !defined(NEW_PT_REGS) +/* + * a -1 in the orig_r0 field signifies + * that the stack frame is NOT for syscall + */ +.macro save_all_int +/* reserved and disable the single step of SYSCFG, by Steven Chen 03/07/10 */ + [--sp] = r0; + r0.l = 0x30; /* Errata for BF533 */ + r0.h = 0x0; + syscfg = r0; /* disable single step flag in SYSCFG */ + r0 = [sp++]; + [--sp] = syscfg; /* store SYSCFG */ + + [--sp] = r0; /* Reserved for IPEND */ + [--sp] = fp; + [--sp] = usp; + [--sp] = r0; + + [--sp] = r0; + r0 = [sp + 8]; + [--sp] = a0.x; + [--sp] = a1.x; + [--sp] = a0.w; + [--sp] = a1.w; + [--sp] = rets; + [--sp] = astat; + [--sp] = seqstat; + [--sp] = retx; /* current pc when exception happens */ + [--sp] = ( r7:5, p5:0 ); + [--sp] = r1; + [--sp] = r2; + [--sp] = r4; + [--sp] = r3; +.endm + +.macro save_all_sys + [--sp] = r0; + [--sp] = r0; + [--sp] = a0.x; + [--sp] = a1.x; + [--sp] = a0.w; + [--sp] = a1.w; + [--sp] = rets; + [--sp] = astat; + [--sp] = seqstat; + [--sp] = retx; /* current pc when exception happens */ + [--sp] = ( r7:5, p5:0 ); + [--sp] = r1; + [--sp] = r2; + [--sp] = r4; + [--sp] = r3; +.endm + +.macro restore_all + r3 = [sp++]; + r4 = [sp++]; + r2 = [sp++]; + r1 = [sp++]; + ( r7:5, p5:0 ) = [sp++]; + retx = [sp++]; + seqstat = [sp++]; + astat = [sp++]; + rets = [sp++]; + a1.w = [sp++]; + a0.w = [sp++]; + a1.x = [sp++]; + a0.x = [sp++]; + sp += 4; /* orig r0 */ + r0 = [sp++]; + + sp += 4; + fp = [sp++]; + sp +=4; /* Skip the IPEND */ + + syscfg = [sp++]; + +.endm + +#endif + +#define STR(X) STR1(X) +#define STR1(X) #X + +#if defined(NEW_PT_REGS) + +#define PT_OFF_ORIG_R0 208 +#define PT_OFF_SR 8 + +#else + +#define PT_OFF_ORIG_R0 0x54 +#define PT_OFF_SR 0x38 /* seqstat in pt_regs */ + +#endif +#endif + +#endif diff --git a/include/asm-blackfin/errno.h b/include/asm-blackfin/errno.h new file mode 100644 index 00000000000..713bba0b221 --- /dev/null +++ b/include/asm-blackfin/errno.h @@ -0,0 +1,156 @@ +/* + * U-boot - errno.h Error number defines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_ERRNO_H +#define _BLACKFIN_ERRNO_H + +#define EPERM 1 /* Operation not permitted */ +#define ENOENT 2 /* No such file or directory */ +#define ESRCH 3 /* No such process */ +#define EINTR 4 /* Interrupted system call */ +#define EIO 5 /* I/O error */ +#define ENXIO 6 /* No such device or address */ +#define E2BIG 7 /* Arg list too long */ +#define ENOEXEC 8 /* Exec format error */ +#define EBADF 9 /* Bad file number */ +#define ECHILD 10 /* No child processes */ +#define EAGAIN 11 /* Try again */ +#define ENOMEM 12 /* Out of memory */ +#define EACCES 13 /* Permission denied */ +#define EFAULT 14 /* Bad address */ +#define ENOTBLK 15 /* Block device required */ +#define EBUSY 16 /* Device or resource busy */ +#define EEXIST 17 /* File exists */ +#define EXDEV 18 /* Cross-device link */ +#define ENODEV 19 /* No such device */ +#define ENOTDIR 20 /* Not a directory */ +#define EISDIR 21 /* Is a directory */ +#define EINVAL 22 /* Invalid argument */ +#define ENFILE 23 /* File table overflow */ +#define EMFILE 24 /* Too many open files */ +#define ENOTTY 25 /* Not a typewriter */ +#define ETXTBSY 26 /* Text file busy */ +#define EFBIG 27 /* File too large */ +#define ENOSPC 28 /* No space left on device */ +#define ESPIPE 29 /* Illegal seek */ +#define EROFS 30 /* Read-only file system */ +#define EMLINK 31 /* Too many links */ +#define EPIPE 32 /* Broken pipe */ +#define EDOM 33 /* Math argument out of domain of func */ +#define ERANGE 34 /* Math result not representable */ +#define EDEADLK 35 /* Resource deadlock would occur */ +#define ENAMETOOLONG 36 /* File name too long */ +#define ENOLCK 37 /* No record locks available */ +#define ENOSYS 38 /* Function not implemented */ +#define ENOTEMPTY 39 /* Directory not empty */ +#define ELOOP 40 /* Too many symbolic links encountered */ +#define EWOULDBLOCK EAGAIN /* Operation would block */ +#define ENOMSG 42 /* No message of desired type */ +#define EIDRM 43 /* Identifier removed */ +#define ECHRNG 44 /* Channel number out of range */ +#define EL2NSYNC 45 /* Level 2 not synchronized */ +#define EL3HLT 46 /* Level 3 halted */ +#define EL3RST 47 /* Level 3 reset */ +#define ELNRNG 48 /* Link number out of range */ +#define EUNATCH 49 /* Protocol driver not attached */ +#define ENOCSI 50 /* No CSI structure available */ +#define EL2HLT 51 /* Level 2 halted */ +#define EBADE 52 /* Invalid exchange */ +#define EBADR 53 /* Invalid request descriptor */ +#define EXFULL 54 /* Exchange full */ +#define ENOANO 55 /* No anode */ +#define EBADRQC 56 /* Invalid request code */ +#define EBADSLT 57 /* Invalid slot */ + +#define EDEADLOCK EDEADLK + +#define EBFONT 59 /* Bad font file format */ +#define ENOSTR 60 /* Device not a stream */ +#define ENODATA 61 /* No data available */ +#define ETIME 62 /* Timer expired */ +#define ENOSR 63 /* Out of streams resources */ +#define ENONET 64 /* Machine is not on the network */ +#define ENOPKG 65 /* Package not installed */ +#define EREMOTE 66 /* Object is remote */ +#define ENOLINK 67 /* Link has been severed */ +#define EADV 68 /* Advertise error */ +#define ESRMNT 69 /* Srmount error */ +#define ECOMM 70 /* Communication error on send */ +#define EPROTO 71 /* Protocol error */ +#define EMULTIHOP 72 /* Multihop attempted */ +#define EDOTDOT 73 /* RFS specific error */ +#define EBADMSG 74 /* Not a data message */ +#define EOVERFLOW 75 /* Value too large for defined data type */ +#define ENOTUNIQ 76 /* Name not unique on network */ +#define EBADFD 77 /* File descriptor in bad state */ +#define EREMCHG 78 /* Remote address changed */ +#define ELIBACC 79 /* Can not access a needed shared library */ +#define ELIBBAD 80 /* Accessing a corrupted shared library */ +#define ELIBSCN 81 /* .lib section in a.out corrupted */ +#define ELIBMAX 82 /* Attempting to link in too many shared libraries */ +#define ELIBEXEC 83 /* Cannot exec a shared library directly */ +#define EILSEQ 84 /* Illegal byte sequence */ +#define ERESTART 85 /* Interrupted system call should be restarted */ +#define ESTRPIPE 86 /* Streams pipe error */ +#define EUSERS 87 /* Too many users */ +#define ENOTSOCK 88 /* Socket operation on non-socket */ +#define EDESTADDRREQ 89 /* Destination address required */ +#define EMSGSIZE 90 /* Message too long */ +#define EPROTOTYPE 91 /* Protocol wrong type for socket */ +#define ENOPROTOOPT 92 /* Protocol not available */ +#define EPROTONOSUPPORT 93 /* Protocol not supported */ +#define ESOCKTNOSUPPORT 94 /* Socket type not supported */ +#define EOPNOTSUPP 95 /* Operation not supported on transport endpoint */ +#define EPFNOSUPPORT 96 /* Protocol family not supported */ +#define EAFNOSUPPORT 97 /* Address family not supported by protocol */ +#define EADDRINUSE 98 /* Address already in use */ +#define EADDRNOTAVAIL 99 /* Cannot assign requested address */ +#define ENETDOWN 100 /* Network is down */ +#define ENETUNREACH 101 /* Network is unreachable */ +#define ENETRESET 102 /* Network dropped connection because of reset */ +#define ECONNABORTED 103 /* Software caused connection abort */ +#define ECONNRESET 104 /* Connection reset by peer */ +#define ENOBUFS 105 /* No buffer space available */ +#define EISCONN 106 /* Transport endpoint is already connected */ +#define ENOTCONN 107 /* Transport endpoint is not connected */ +#define ESHUTDOWN 108 /* Cannot send after transport endpoint shutdown */ +#define ETOOMANYREFS 109 /* Too many references: cannot splice */ +#define ETIMEDOUT 110 /* Connection timed out */ +#define ECONNREFUSED 111 /* Connection refused */ +#define EHOSTDOWN 112 /* Host is down */ +#define EHOSTUNREACH 113 /* No route to host */ +#define EALREADY 114 /* Operation already in progress */ +#define EINPROGRESS 115 /* Operation now in progress */ +#define ESTALE 116 /* Stale NFS file handle */ +#define EUCLEAN 117 /* Structure needs cleaning */ +#define ENOTNAM 118 /* Not a XENIX named type file */ +#define ENAVAIL 119 /* No XENIX semaphores available */ +#define EISNAM 120 /* Is a named type file */ +#define EREMOTEIO 121 /* Remote I/O error */ +#define EDQUOT 122 /* Quota exceeded */ + +#define ENOMEDIUM 123 /* No medium found */ +#define EMEDIUMTYPE 124 /* Wrong medium type */ + +#endif diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h new file mode 100644 index 00000000000..56a12f07b38 --- /dev/null +++ b/include/asm-blackfin/global_data.h @@ -0,0 +1,64 @@ +/* + * U-boot - global_data.h Declarations for global data of u-boot + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_GBL_DATA_H +#define __ASM_GBL_DATA_H + +#include <asm/irq.h> + +/* + * The following data structure is placed in some memory wich is + * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or + * some locked parts of the data cache) to allow for a minimum set of + * global variables during system initialization (until we have set + * up the memory controller so that we can use RAM). + * + * Keep it *SMALL* and remember to set CFG_GBL_DATA_SIZE > sizeof(gd_t) + */ +typedef struct global_data { + bd_t *bd; + unsigned long flags; + unsigned long board_type; + unsigned long baudrate; + unsigned long have_console; /* serial_init() was called */ + unsigned long ram_size; /* RAM size */ + unsigned long reloc_off; /* Relocation Offset */ + unsigned long env_addr; /* Address of Environment struct */ + unsigned long env_valid; /* Checksum of Environment valid? */ + void **jt; /* jump table */ +} gd_t; + +/* + * Global Data Flags + */ +#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */ +#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ +#define GD_FLG_SILENT 0x00004 /* Silent mode */ + +#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("P5") + +#endif diff --git a/include/asm-blackfin/hw_irq.h b/include/asm-blackfin/hw_irq.h new file mode 100644 index 00000000000..1ee050ec14a --- /dev/null +++ b/include/asm-blackfin/hw_irq.h @@ -0,0 +1,37 @@ +/* + * U-boot - hw_irq.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * linux/arch/$(ARCH)/platform/$(PLATFORM)/hw_irq.h + * BlackFin (ADI) assembler restricted values by Ted Ma <mated@sympatico.ca> + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc <mattw@lineo.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/config.h> +#ifdef CONFIG_EZKIT533 +#include <asm/board/bf533_irq.h> +#endif +#ifdef CONFIG_STAMP +#include <asm/board/bf533_irq.h> +#endif diff --git a/include/asm-blackfin/io-kernel.h b/include/asm-blackfin/io-kernel.h new file mode 100644 index 00000000000..0b0572ffa4d --- /dev/null +++ b/include/asm-blackfin/io-kernel.h @@ -0,0 +1,135 @@ +/* + * U-boot - io-kernel.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_IO_H +#define _BLACKFIN_IO_H + +#ifdef __KERNEL__ + +#include <linux/config.h> + +/* + * These are for ISA/PCI shared memory _only_ and should never be used + * on any other type of memory, including Zorro memory. They are meant to + * access the bus in the bus byte order which is little-endian!. + * + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the m68k architecture, we just read/write the + * memory location directly. + */ +/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates + * two accesses to memory, which may be undesireable for some devices. + */ +#define readb(addr) ({ unsigned char __v = (*(volatile unsigned char *) (addr));asm("ssync;"); __v; }) +#define readw(addr) ({ unsigned short __v = (*(volatile unsigned short *) (addr)); asm("ssync;");__v; }) +#define readl(addr) ({ unsigned int __v = (*(volatile unsigned int *) (addr));asm("ssync;"); __v; }) +#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) +#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) +#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) +#define __raw_readb readb +#define __raw_readw readw +#define __raw_readl readl +#define __raw_writeb writeb +#define __raw_writew writew +#define __raw_writel writel +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) +#define inb(addr) cf_inb((volatile unsigned char*)(addr)) +#define inw(addr) readw(addr) +#define inl(addr) readl(addr) +#define outb(x,addr) cf_outb((unsigned char)(x), (volatile unsigned char*)(addr)) +#define outw(x,addr) ((void) writew(x,addr)) +#define outl(x,addr) ((void) writel(x,addr)) +#define inb_p(addr) inb(addr) +#define inw_p(addr) inw(addr) +#define inl_p(addr) inl(addr) +#define outb_p(x,addr) outb(x,addr) +#define outw_p(x,addr) outw(x,addr) +#define outl_p(x,addr) outl(x,addr) +#define insb(port, addr, count) memcpy((void*)addr, (void*)port, count) +#define insw(port, addr, count) cf_insw((unsigned short*)addr, (unsigned short*)(port), (count)) +#define insl(port, addr, count) memcpy((void*)addr, (void*)port, (4*count)) +#define outsb(port, addr, count) memcpy((void*)port, (void*)addr, count) +#define outsw(port,addr,count) cf_outsw((unsigned short*)(port), (unsigned short*)addr, (count)) +#define outsl(port, addr, count) memcpy((void*)port, (void*)addr, (4*count)) +#define IO_SPACE_LIMIT 0xffff + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +#ifndef __ASSEMBLY__ +extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); +extern void __iounmap(void *addr, unsigned long size); +extern inline void *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +extern inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +extern inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} +extern inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +extern void iounmap(void *addr); + +/* Nothing to do */ + +extern void blkfin_inv_cache_all(void); + +#endif + +#define dma_cache_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) + +/* Pages to physical address... */ +#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) +#define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) + +#define mm_ptov(vaddr) ((void *) (vaddr)) +#define mm_vtop(vaddr) ((unsigned long) (vaddr)) +#define phys_to_virt(vaddr) ((void *) (vaddr)) +#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +#endif + +#endif diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h new file mode 100644 index 00000000000..e5b388e262b --- /dev/null +++ b/include/asm-blackfin/io.h @@ -0,0 +1,122 @@ +/* + * U-boot - io.h IO routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_IO_H +#define _BLACKFIN_IO_H + +#ifdef __KERNEL__ + +#include <linux/config.h> + +/* function prototypes for CF support */ +extern void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words); +extern void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words); +extern unsigned char cf_inb(volatile unsigned char *addr); +extern void cf_outb(unsigned char val, volatile unsigned char* addr); + +/* + * These are for ISA/PCI shared memory _only_ and should never be used + * on any other type of memory, including Zorro memory. They are meant to + * access the bus in the bus byte order which is little-endian!. + * + * readX/writeX() are used to access memory mapped devices. On some + * architectures the memory mapped IO stuff needs to be accessed + * differently. On the m68k architecture, we just read/write the + * memory location directly. + */ + + +#define readb(addr) ({ unsigned char __v = (*(volatile unsigned char *) (addr));asm("ssync;"); __v; }) +#define readw(addr) ({ unsigned short __v = (*(volatile unsigned short *) (addr)); asm("ssync;");__v; }) +#define readl(addr) ({ unsigned int __v = (*(volatile unsigned int *) (addr));asm("ssync;"); __v; }) + +#define writeb(b,addr) {((*(volatile unsigned char *) (addr)) = (b)); asm("ssync;");} +#define writew(b,addr) {((*(volatile unsigned short *) (addr)) = (b)); asm("ssync;");} +#define writel(b,addr) {((*(volatile unsigned int *) (addr)) = (b)); asm("ssync;");} + +#define memset_io(a,b,c) memset((void *)(a),(b),(c)) +#define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) +#define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) + +#define inb_p(addr) readb((addr) + BF533_PCIIO_BASE) +#define inb(addr) cf_inb((volatile unsigned char*)(addr)) + +#define outb(x,addr) cf_outb((unsigned char)(x), (volatile unsigned char*)(addr)) +#define outb_p(x,addr) outb(x, (addr) + BF533_PCIIO_BASE) + +#define inw(addr) readw((addr) + BF533_PCIIO_BASE) +#define inl(addr) readl((addr) + BF533_PCIIO_BASE) + +#define outw(x,addr) writew(x, (addr) + BF533_PCIIO_BASE) +#define outl(x,addr) writel(x, (addr) + BF533_PCIIO_BASE) + +#define insb(port, addr, count) memcpy((void*)addr, (void*)(BF533_PCIIO_BASE + port), count) +#define insw(port, addr, count) cf_insw((unsigned short*)addr, (unsigned short*)(port), (count)) +#define insl(port, addr, count) memcpy((void*)addr, (void*)(BF533_PCIIO_BASE + port), (4*count)) + +#define outsb(port,addr,count) memcpy((void*)(BF533_PCIIO_BASE + port), (void*)addr, count) +#define outsw(port,addr,count) cf_outsw((unsigned short*)(port), (unsigned short*)addr, (count)) +#define outsl(port,addr,count) memcpy((void*)(BF533_PCIIO_BASE + port), (void*)addr, (4*count)) + +#define IO_SPACE_LIMIT 0xffff + +/* Values for nocacheflag and cmode */ +#define IOMAP_FULL_CACHING 0 +#define IOMAP_NOCACHE_SER 1 +#define IOMAP_NOCACHE_NONSER 2 +#define IOMAP_WRITETHROUGH 3 + +extern void *__ioremap(unsigned long physaddr, unsigned long size, + int cacheflag); +extern void __iounmap(void *addr, unsigned long size); + +extern inline void *ioremap(unsigned long physaddr, unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +extern inline void *ioremap_nocache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); +} +extern inline void *ioremap_writethrough(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); +} +extern inline void *ioremap_fullcache(unsigned long physaddr, + unsigned long size) +{ + return __ioremap(physaddr, size, IOMAP_FULL_CACHING); +} + +extern void iounmap(void *addr); + +extern void blkfin_inv_cache_all(void); +#define dma_cache_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) +#define dma_cache_wback(_start,_size) do { } while (0) +#define dma_cache_wback_inv(_start,_size) do { blkfin_inv_cache_all();} while (0) + +#endif +#endif diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h new file mode 100644 index 00000000000..5fbc5a363b2 --- /dev/null +++ b/include/asm-blackfin/irq.h @@ -0,0 +1,142 @@ +/* + * U-boot - irq.h Interrupt related header file + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file was based on + * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c + * + * Changed by HuTao Apr18, 2003 + * + * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle + * + * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca> + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_IRQ_H_ +#define _BLACKFIN_IRQ_H_ + +#include <linux/config.h> +#include <asm/cpu/bf533_irq.h> + +/* + * On the Blackfin, the interrupt structure allows remmapping of the hardware + * levels. + * - I'm going to assume that the H/W level is going to stay at the default + * settings. If someone wants to go through and abstart this out, feel free + * to mod the interrupt numbering scheme. + * - I'm abstracting the interrupts so that uClinux does not know anything + * about the H/W levels. If you want to change the H/W AND keep the abstracted + * levels that uClinux sees, you should be able to do most of it here. + * - I've left the "abstract" numbering sparce in case someone wants to pull the + * interrupts apart (just the TX/RX for the various devices) + */ + +#define NR_IRQS SYS_IRQS +/* + * "Generic" interrupt sources + */ +#define IRQ_SCHED_TIMER (8) /* interrupt source for scheduling timer */ + +static __inline__ int irq_cannonicalize(int irq) +{ + return irq; +} + +/* + * Machine specific interrupt sources. + * + * Adding an interrupt service routine for a source with this bit + * set indicates a special machine specific interrupt source. + * The machine specific files define these sources. + * + * The IRQ_MACHSPEC bit is now gone - the only thing it did was to + * introduce unnecessary overhead. + * + * All interrupt handling is actually machine specific so it is better + * to use function pointers, as used by the Sparc port, and select the + * interrupt handling functions when initializing the kernel. This way + * we save some unnecessary overhead at run-time. + * 01/11/97 - Jes + */ + +extern void (*mach_enable_irq) (unsigned int); +extern void (*mach_disable_irq) (unsigned int); +extern int sys_request_irq(unsigned int, + void (*)(int, void *, struct pt_regs *), + unsigned long, const char *, void *); +extern void sys_free_irq(unsigned int, void *); + +/* + * various flags for request_irq() - the Amiga now uses the standard + * mechanism like all other architectures - SA_INTERRUPT and SA_SHIRQ + * are your friends. + */ +#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ +#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ +#define IRQ_FLG_FAST (0x0004) +#define IRQ_FLG_SLOW (0x0008) +#define IRQ_FLG_STD (0x8000) /* internally used */ + +/* + * This structure is used to chain together the ISRs for a particular + * interrupt source (if it supports chaining). + */ +typedef struct irq_node { + void (*handler) (int, void *, struct pt_regs *); + unsigned long flags; + void *dev_id; + const char *devname; + struct irq_node *next; +} irq_node_t; + +/* + * This structure has only 4 elements for speed reasons + */ +typedef struct irq_handler { + void (*handler) (int, void *, struct pt_regs *); + unsigned long flags; + void *dev_id; + const char *devname; +} irq_handler_t; + +/* count of spurious interrupts */ +extern volatile unsigned int num_spurious; + +/* + * This function returns a new irq_node_t + */ +extern irq_node_t *new_irq_node(void); + +/* + * Some drivers want these entry points + */ +#define enable_irq(x) (mach_enable_irq ? (*mach_enable_irq)(x) : 0) +#define disable_irq(x) (mach_disable_irq ? (*mach_disable_irq)(x) : 0) + +#define enable_irq_nosync(x) enable_irq(x) +#define disable_irq_nosync(x) disable_irq(x) + +#endif diff --git a/include/asm-blackfin/linkage.h b/include/asm-blackfin/linkage.h new file mode 100644 index 00000000000..18f0c36d24a --- /dev/null +++ b/include/asm-blackfin/linkage.h @@ -0,0 +1,60 @@ +/* + * U-boot - linkage.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _LINUX_LINKAGE_H +#define _LINUX_LINKAGE_H + +#include <linux/config.h> + +#ifdef __cplusplus +#define CPP_ASMLINKAGE extern "C" +#else +#define CPP_ASMLINKAGE +#endif + +#define asmlinkage CPP_ASMLINKAGE + +#define SYMBOL_NAME_STR(X) #X +#define SYMBOL_NAME(X) X +#ifdef __STDC__ +#define SYMBOL_NAME_LABEL(X) X##: +#else +#define SYMBOL_NAME_LABEL(X) X: +#endif + +#define __ALIGN .align 4 +#define __ALIGN_STR ".align 4" + +#ifdef __ASSEMBLY__ + +#define ALIGN __ALIGN +#define ALIGN_STR __ALIGN_STR + +#define ENTRY(name) \ + .globl SYMBOL_NAME(name); \ + ALIGN; \ + SYMBOL_NAME_LABEL(name) +#endif + +#endif diff --git a/include/asm-blackfin/machdep.h b/include/asm-blackfin/machdep.h new file mode 100644 index 00000000000..0a43ba1c5a7 --- /dev/null +++ b/include/asm-blackfin/machdep.h @@ -0,0 +1,89 @@ +/* + * U-boot - machdep.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_MACHDEP_H +#define _BLACKFIN_MACHDEP_H + +/* Machine dependent initial routines: + * + * Based on include/asm-m68knommu/machdep.h + * For blackfin, just now we only have bfin, so they'd point to the default bfin + * + */ + +struct pt_regs; +struct kbd_repeat; +struct mktime; +struct hwclk_time; +struct gendisk; +struct buffer_head; + +extern void (*mach_sched_init) (void (*handler) (int, void *, struct pt_regs *)); + +/* machine dependent keyboard functions */ +extern int (*mach_keyb_init) (void); +extern int (*mach_kbdrate) (struct kbd_repeat *); +extern void (*mach_kbd_leds) (unsigned int); + +/* machine dependent irq functions */ +extern void (*mach_init_IRQ) (void); +extern void (*(*mach_default_handler)[]) (int, void *, struct pt_regs *); +extern int (*mach_request_irq) (unsigned int irq, + void (*handler) (int, void *, + struct pt_regs *), + unsigned long flags, const char *devname, + void *dev_id); +extern void (*mach_free_irq) (unsigned int irq, void *dev_id); +extern void (*mach_get_model) (char *model); +extern int (*mach_get_hardware_list) (char *buffer); +extern int (*mach_get_irq_list) (char *buf); +extern void (*mach_process_int) (int irq, struct pt_regs * fp); + +/* machine dependent timer functions */ +extern unsigned long (*mach_gettimeoffset) (void); +extern void (*mach_gettod) (int *year, int *mon, int *day, int *hour, + int *min, int *sec); +extern int (*mach_hwclk) (int, struct hwclk_time *); +extern int (*mach_set_clock_mmss) (unsigned long); +extern void (*mach_reset) (void); +extern void (*mach_halt) (void); +extern void (*mach_power_off) (void); +extern unsigned long (*mach_hd_init) (unsigned long, unsigned long); +extern void (*mach_hd_setup) (char *, int *); +extern long mach_max_dma_address; +extern void (*mach_floppy_setup) (char *, int *); +extern void (*mach_floppy_eject) (void); +extern void (*mach_heartbeat) (int); +extern void (*mach_l2_flush) (int); +extern int mach_sysrq_key; +extern int mach_sysrq_shift_state; +extern int mach_sysrq_shift_mask; +extern char *mach_sysrq_xlate; + +#ifdef CONFIG_UCLINUX +extern void config_BSP(char *command, int len); +extern void (*mach_tick) (void); +#endif + +#endif diff --git a/include/asm-blackfin/mem_init.h b/include/asm-blackfin/mem_init.h new file mode 100644 index 00000000000..1a13d908e0f --- /dev/null +++ b/include/asm-blackfin/mem_init.h @@ -0,0 +1,287 @@ +/* + * U-boot - mem_init.h Header file for memory initialization + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#if ( CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E ) + #if ( CONFIG_SCLK_HZ > 119402985 ) + #define SDRAM_tRP TRP_2 + #define SDRAM_tRP_num 2 + #define SDRAM_tRAS TRAS_7 + #define SDRAM_tRAS_num 7 + #define SDRAM_tRCD TRCD_2 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 104477612 ) && ( CONFIG_SCLK_HZ <= 119402985 ) + #define SDRAM_tRP TRP_2 + #define SDRAM_tRP_num 2 + #define SDRAM_tRAS TRAS_6 + #define SDRAM_tRAS_num 6 + #define SDRAM_tRCD TRCD_2 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 89552239 ) && ( CONFIG_SCLK_HZ <= 104477612 ) + #define SDRAM_tRP TRP_2 + #define SDRAM_tRP_num 2 + #define SDRAM_tRAS TRAS_5 + #define SDRAM_tRAS_num 5 + #define SDRAM_tRCD TRCD_2 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 74626866 ) && ( CONFIG_SCLK_HZ <= 89552239 ) + #define SDRAM_tRP TRP_2 + #define SDRAM_tRP_num 2 + #define SDRAM_tRAS TRAS_4 + #define SDRAM_tRAS_num 4 + #define SDRAM_tRCD TRCD_2 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 66666667 ) && ( CONFIG_SCLK_HZ <= 74626866 ) + #define SDRAM_tRP TRP_2 + #define SDRAM_tRP_num 2 + #define SDRAM_tRAS TRAS_3 + #define SDRAM_tRAS_num 3 + #define SDRAM_tRCD TRCD_2 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 59701493 ) && ( CONFIG_SCLK_HZ <= 66666667 ) + #define SDRAM_tRP TRP_1 + #define SDRAM_tRP_num 1 + #define SDRAM_tRAS TRAS_4 + #define SDRAM_tRAS_num 3 + #define SDRAM_tRCD TRCD_1 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 44776119 ) && ( CONFIG_SCLK_HZ <= 59701493 ) + #define SDRAM_tRP TRP_1 + #define SDRAM_tRP_num 1 + #define SDRAM_tRAS TRAS_3 + #define SDRAM_tRAS_num 3 + #define SDRAM_tRCD TRCD_1 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ > 29850746 ) && ( CONFIG_SCLK_HZ <= 44776119 ) + #define SDRAM_tRP TRP_1 + #define SDRAM_tRP_num 1 + #define SDRAM_tRAS TRAS_2 + #define SDRAM_tRAS_num 2 + #define SDRAM_tRCD TRCD_1 + #define SDRAM_tWR TWR_2 + #endif + #if ( CONFIG_SCLK_HZ <= 29850746 ) + #define SDRAM_tRP TRP_1 + #define SDRAM_tRP_num 1 + #define SDRAM_tRAS TRAS_1 + #define SDRAM_tRAS_num 1 + #define SDRAM_tRCD TRCD_1 + #define SDRAM_tWR TWR_2 + #endif +#endif + +#if (CONFIG_MEM_MT48LC16M16A2TG_75) + /*SDRAM INFORMATION: */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ + #define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC64M4A2FB_7E) + /*SDRAM INFORMATION: */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ + #define SDRAM_CL CL_2 +#endif + +#if ( CONFIG_MEM_SIZE == 128 ) + #define SDRAM_SIZE EBSZ_128 +#endif +#if ( CONFIG_MEM_SIZE == 64 ) + #define SDRAM_SIZE EBSZ_64 +#endif +#if ( CONFIG_MEM_SIZE == 32 ) + #define SDRAM_SIZE EBSZ_32 +#endif +#if ( CONFIG_MEM_SIZE == 16 ) + #define SDRAM_SIZE EBSZ_16 +#endif +#if ( CONFIG_MEM_ADD_WDTH == 11 ) + #define SDRAM_WIDTH EBCAW_11 +#endif +#if ( CONFIG_MEM_ADD_WDTH == 10 ) + #define SDRAM_WIDTH EBCAW_10 +#endif +#if ( CONFIG_MEM_ADD_WDTH == 9 ) + #define SDRAM_WIDTH EBCAW_9 +#endif +#if ( CONFIG_MEM_ADD_WDTH == 8 ) + #define SDRAM_WIDTH EBCAW_8 +#endif + +#define mem_SDBCTL SDRAM_WIDTH | SDRAM_SIZE | EBE + +/* Equation from section 17 (p17-46) of BF533 HRM */ +#define mem_SDRRC ((( CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) + +/* Enable SCLK Out */ +#define mem_SDGCTL ( SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS ) + +#define flash_EBIU_AMBCTL_WAT ( ( CONFIG_FLASH_SPEED_BWAT * 4 ) / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1 +#define flash_EBIU_AMBCTL_RAT ( ( CONFIG_FLASH_SPEED_BRAT * 4 ) / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1 +#define flash_EBIU_AMBCTL_HT ( ( CONFIG_FLASH_SPEED_BHT * 4 ) / ( 4000000000 / CONFIG_SCLK_HZ ) ) +#define flash_EBIU_AMBCTL_ST ( ( CONFIG_FLASH_SPEED_BST * 4 ) / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1 +#define flash_EBIU_AMBCTL_TT ( ( CONFIG_FLASH_SPEED_BTT * 4 ) / ( 4000000000 / CONFIG_SCLK_HZ ) ) + 1 + +#if (flash_EBIU_AMBCTL_TT > 3 ) + #define flash_EBIU_AMBCTL0_TT B0TT_4 +#endif +#if (flash_EBIU_AMBCTL_TT == 3 ) + #define flash_EBIU_AMBCTL0_TT B0TT_3 +#endif +#if (flash_EBIU_AMBCTL_TT == 2 ) + #define flash_EBIU_AMBCTL0_TT B0TT_2 +#endif +#if (flash_EBIU_AMBCTL_TT < 2 ) + #define flash_EBIU_AMBCTL0_TT B0TT_1 +#endif + +#if (flash_EBIU_AMBCTL_ST > 3 ) + #define flash_EBIU_AMBCTL0_ST B0ST_4 +#endif +#if (flash_EBIU_AMBCTL_ST == 3 ) + #define flash_EBIU_AMBCTL0_ST B0ST_3 +#endif +#if (flash_EBIU_AMBCTL_ST == 2 ) + #define flash_EBIU_AMBCTL0_ST B0ST_2 +#endif +#if (flash_EBIU_AMBCTL_ST < 2 ) + #define flash_EBIU_AMBCTL0_ST B0ST_1 +#endif + +#if (flash_EBIU_AMBCTL_HT > 2 ) + #define flash_EBIU_AMBCTL0_HT B0HT_3 +#endif +#if (flash_EBIU_AMBCTL_HT == 2 ) + #define flash_EBIU_AMBCTL0_HT B0HT_2 +#endif +#if (flash_EBIU_AMBCTL_HT == 1 ) + #define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) + #define flash_EBIU_AMBCTL0_HT B0HT_0 +#endif +#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) + #define flash_EBIU_AMBCTL0_HT B0HT_1 +#endif + +#if (flash_EBIU_AMBCTL_WAT > 14) + #define flash_EBIU_AMBCTL0_WAT B0WAT_15 +#endif +#if (flash_EBIU_AMBCTL_WAT == 14) + #define flash_EBIU_AMBCTL0_WAT B0WAT_14 +#endif +#if (flash_EBIU_AMBCTL_WAT == 13) + #define flash_EBIU_AMBCTL0_WAT B0WAT_13 +#endif +#if (flash_EBIU_AMBCTL_WAT == 12) + #define flash_EBIU_AMBCTL0_WAT B0WAT_12 +#endif +#if (flash_EBIU_AMBCTL_WAT == 11) + #define flash_EBIU_AMBCTL0_WAT B0WAT_11 +#endif +#if (flash_EBIU_AMBCTL_WAT == 10) + #define flash_EBIU_AMBCTL0_WAT B0WAT_10 +#endif +#if (flash_EBIU_AMBCTL_WAT == 9) + #define flash_EBIU_AMBCTL0_WAT B0WAT_9 +#endif +#if (flash_EBIU_AMBCTL_WAT == 8) + #define flash_EBIU_AMBCTL0_WAT B0WAT_8 +#endif +#if (flash_EBIU_AMBCTL_WAT == 7) + #define flash_EBIU_AMBCTL0_WAT B0WAT_7 +#endif +#if (flash_EBIU_AMBCTL_WAT == 6) + #define flash_EBIU_AMBCTL0_WAT B0WAT_6 +#endif +#if (flash_EBIU_AMBCTL_WAT == 5) + #define flash_EBIU_AMBCTL0_WAT B0WAT_5 +#endif +#if (flash_EBIU_AMBCTL_WAT == 4) + #define flash_EBIU_AMBCTL0_WAT B0WAT_4 +#endif +#if (flash_EBIU_AMBCTL_WAT == 3) + #define flash_EBIU_AMBCTL0_WAT B0WAT_3 +#endif +#if (flash_EBIU_AMBCTL_WAT == 2) + #define flash_EBIU_AMBCTL0_WAT B0WAT_2 +#endif +#if (flash_EBIU_AMBCTL_WAT == 1) + #define flash_EBIU_AMBCTL0_WAT B0WAT_1 +#endif + +#if (flash_EBIU_AMBCTL_RAT > 14) + #define flash_EBIU_AMBCTL0_RAT B0RAT_15 +#endif +#if (flash_EBIU_AMBCTL_RAT == 14) + #define flash_EBIU_AMBCTL0_RAT B0RAT_14 +#endif +#if (flash_EBIU_AMBCTL_RAT == 13) + #define flash_EBIU_AMBCTL0_RAT B0RAT_13 +#endif +#if (flash_EBIU_AMBCTL_RAT == 12) + #define flash_EBIU_AMBCTL0_RAT B0RAT_12 +#endif +#if (flash_EBIU_AMBCTL_RAT == 11) + #define flash_EBIU_AMBCTL0_RAT B0RAT_11 +#endif +#if (flash_EBIU_AMBCTL_RAT == 10) + #define flash_EBIU_AMBCTL0_RAT B0RAT_10 +#endif +#if (flash_EBIU_AMBCTL_RAT == 9) + #define flash_EBIU_AMBCTL0_RAT B0RAT_9 +#endif +#if (flash_EBIU_AMBCTL_RAT == 8) + #define flash_EBIU_AMBCTL0_RAT B0RAT_8 +#endif +#if (flash_EBIU_AMBCTL_RAT == 7) + #define flash_EBIU_AMBCTL0_RAT B0RAT_7 +#endif +#if (flash_EBIU_AMBCTL_RAT == 6) + #define flash_EBIU_AMBCTL0_RAT B0RAT_6 +#endif +#if (flash_EBIU_AMBCTL_RAT == 5) + #define flash_EBIU_AMBCTL0_RAT B0RAT_5 +#endif +#if (flash_EBIU_AMBCTL_RAT == 4) + #define flash_EBIU_AMBCTL0_RAT B0RAT_4 +#endif +#if (flash_EBIU_AMBCTL_RAT == 3) + #define flash_EBIU_AMBCTL0_RAT B0RAT_3 +#endif +#if (flash_EBIU_AMBCTL_RAT == 2) + #define flash_EBIU_AMBCTL0_RAT B0RAT_2 +#endif +#if (flash_EBIU_AMBCTL_RAT == 1) + #define flash_EBIU_AMBCTL0_RAT B0RAT_1 +#endif + +#define flash_EBIU_AMBCTL0 flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h new file mode 100644 index 00000000000..406ece53771 --- /dev/null +++ b/include/asm-blackfin/page.h @@ -0,0 +1,128 @@ +/* + * U-boot - page.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_PAGE_H +#define _BLACKFIN_PAGE_H + +#include <linux/config.h> + +/* PAGE_SHIFT determines the page size */ + +#define PAGE_SHIFT (12) +#define PAGE_SIZE (4096) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +#ifdef __KERNEL__ + +#include <asm/setup.h> + +#if PAGE_SHIFT < 13 +#define KTHREAD_SIZE (8192) +#else +#define KTHREAD_SIZE PAGE_SIZE +#endif + +#ifndef __ASSEMBLY__ + +#define get_user_page(vaddr) __get_free_page(GFP_KERNEL) +#define free_user_page(page, addr) free_page(addr) + +#define clear_page(page) memset((page), 0, PAGE_SIZE) +#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) + +#define clear_user_page(page, vaddr) clear_page(page) +#define copy_user_page(to, from, vaddr) copy_page(to, from) + +/* + * These are used to make use of C type-checking.. + */ +typedef struct { + unsigned long pte; +} pte_t; +typedef struct { + unsigned long pmd[16]; +} pmd_t; +typedef struct { + unsigned long pgd; +} pgd_t; +typedef struct { + unsigned long pgprot; +} pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((&x)->pmd[0]) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) + +/* Pure 2^n version of get_order */ +extern __inline__ int get_order(unsigned long size) +{ + int order; + + size = (size - 1) >> (PAGE_SHIFT - 1); + order = -1; + do { + size >>= 1; + order++; + } while (size); + return order; +} + +#endif /* !__ASSEMBLY__ */ + +#include <asm/page_offset.h> + +#define PAGE_OFFSET (PAGE_OFFSET_RAW) + +#ifndef __ASSEMBLY__ + +#define __pa(vaddr) virt_to_phys((void *)vaddr) +#define __va(paddr) phys_to_virt((unsigned long)paddr) + +#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) +#define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) +#define VALID_PAGE(page) ((page - mem_map) < max_mapnr) + +#define BUG() do { \ + \ + while (1); /* dead-loop */ \ +} while (0) + +#define PAGE_BUG(page) do { \ + BUG(); \ +} while (0) + +#endif + +#endif + +#endif diff --git a/include/asm-blackfin/page_offset.h b/include/asm-blackfin/page_offset.h new file mode 100644 index 00000000000..262473fc3d0 --- /dev/null +++ b/include/asm-blackfin/page_offset.h @@ -0,0 +1,35 @@ +/* + * U-boot - page_offset.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Changes made by Akbar Hussain April 10, 2001 + */ + +#include <linux/config.h> + +/* This handles the memory map.. */ + +#ifdef CONFIG_BLACKFIN +#define PAGE_OFFSET_RAW 0x00000000 +#endif diff --git a/include/asm-blackfin/posix_types.h b/include/asm-blackfin/posix_types.h new file mode 100644 index 00000000000..f1f2b5ffc20 --- /dev/null +++ b/include/asm-blackfin/posix_types.h @@ -0,0 +1,90 @@ +/* + * U-boot - posix_types.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ARCH_BLACKFIN_POSIX_TYPES_H +#define __ARCH_BLACKFIN_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned short __kernel_dev_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_daddr_t; +typedef char *__kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d)) + +#undef __FD_CLR +#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d)) + +#undef __FD_ISSET +#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp))) + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h new file mode 100644 index 00000000000..19bd7201066 --- /dev/null +++ b/include/asm-blackfin/processor.h @@ -0,0 +1,174 @@ +/* + * U-boot - processor.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * include/asm-m68k/processor.h + * Changes made by Akbar Hussain Lineo, Inc, May 2001 for BLACKFIN + * Copyright (C) 1995 Hamish Macdonald + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_BLACKFIN_PROCESSOR_H +#define __ASM_BLACKFIN_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#include <linux/config.h> +#include <asm/segment.h> +#include <asm/ptrace.h> +#include <asm/current.h> + +extern inline unsigned long rdusp(void) +{ + unsigned long usp; + + __asm__ __volatile__("%0 = usp;\n\t":"=da"(usp)); + return usp; +} + +extern inline void wrusp(unsigned long usp) +{ + __asm__ __volatile__("usp = %0;\n\t"::"da"(usp)); +} + +/* + * User space process size: 3.75GB. This is hardcoded into a few places, + * so don't change it unless you know what you are doing. + */ +#define TASK_SIZE (0xF0000000UL) + +/* + * Bus types + */ +#define EISA_bus 0 +#define MCA_bus 0 + +/* There is no pc register avaliable for BLACKFIN, so we are going to get + * it indirectly + */ + +#if 0 +inline unsigned long obtain_pc_indirectly(void) +{ + unsigned long pc; + __asm__ __volatile__("%0 = rets;\n":"=d"(pc)); + return (pc - 4); /* call pcrel24 is 4 bytes long */ +} +#endif + +/* + * if you change this structure, you must change the code and offsets + * in m68k/machasm.S + */ + +struct thread_struct { + unsigned long ksp; /* kernel stack pointer */ + unsigned long usp; /* user stack pointer */ + unsigned short seqstat; /* saved status register */ + unsigned long esp0; /* points to SR of stack frame pt_regs */ + unsigned long pc; /* instruction pointer */ +}; + +#define INIT_MMAP { &init_mm, 0, 0x40000000, NULL, __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED), VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } + +#define INIT_THREAD { \ + sizeof(init_stack) + (unsigned long) init_stack, 0, \ + PS_S, 0\ +} + +/* + * Do necessary setup to start up a newly executed thread. + * + * pass the data segment into user programs if it exists, + * it can't hurt anything as far as I can tell + */ +#define start_thread(_regs, _pc, _usp) \ +do { \ + set_fs(USER_DS); /* reads from user space */ \ + (_regs)->pc = (_pc); \ + if (current->mm) \ + (_regs)->r5 = current->mm->start_data; \ + (_regs)->seqstat &= ~0x0c00; \ + wrusp(_usp); \ + /* Adde by HuTao, May 26, 2003 3:39PM */\ + if ((_regs)->ipend & 0x8000) /* check whether system in supper mode - StChen */\ + (_regs)->ipend = 0x0;\ +} while(0) + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +static inline void release_thread(struct task_struct *dead_task) +{ +} + +extern int kernel_thread(int (*fn) (void *), void *arg, + unsigned long flags); + +#define copy_segments(tsk, mm) do { } while (0) +#define release_segments(mm) do { } while (0) +#define forget_segments() do { } while (0) + +/* + * Free current thread data structures etc.. + */ +static inline void exit_thread(void) +{ +} + +/* + * Return saved PC of a blocked thread. + */ +extern inline unsigned long thread_saved_pc(struct thread_struct *t) +{ + extern void scheduling_functions_start_here(void); + extern void scheduling_functions_end_here(void); + return 0; +} + +unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) \ + ({ \ + unsigned long eip = 0; \ + if ((tsk)->thread.esp0 > PAGE_SIZE && \ + MAP_NR((tsk)->thread.esp0) < max_mapnr) \ + eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ + eip; }) +#define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) +#define THREAD_SIZE (2*PAGE_SIZE) + +/* Allocation and freeing of basic task resources. */ +#define alloc_task_struct() \ + ((struct task_struct *) __get_free_pages(GFP_KERNEL,1)) +#define free_task_struct(p) free_pages((unsigned long)(p),1) +#define get_task_struct(tsk) atomic_inc(&mem_map[MAP_NR(tsk)].count) + +#define init_task (init_task_union.task) +#define init_stack (init_task_union.stack) + +#endif diff --git a/include/asm-blackfin/ptrace.h b/include/asm-blackfin/ptrace.h new file mode 100644 index 00000000000..afd57773ac9 --- /dev/null +++ b/include/asm-blackfin/ptrace.h @@ -0,0 +1,269 @@ +/* + * U-boot - ptrace.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_PTRACE_H +#define _BLACKFIN_PTRACE_H + +#define NEW_PT_REGS + +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 7 are data registers R0-R7 + * 8 - 15 are address registers P0-P7 + * 16 - 31 dsp registers I/B/L0 -- I/B/L3 & M0--M3 + * 32 - 33 A registers A0 & A1 + * 34 - status register + * + * We follows above, except: + * 32-33 --- Low 32-bit of A0&1 + * 34-35 --- High 8-bit of A0&1 + */ + +#if defined(NEW_PT_REGS) + +#define PT_IPEND 0 +#define PT_SYSCFG (PT_IPEND+4) +#define PT_SEQSTAT (PT_SYSCFG+4) +#define PT_RETE (PT_SEQSTAT+4) +#define PT_RETN (PT_RETE+4) +#define PT_RETX (PT_RETN+4) +#define PT_RETI (PT_RETX+4) +#define PT_PC PT_RETI +#define PT_RETS (PT_RETI+4) +#define PT_RESERVED (PT_RETS+4) +#define PT_ASTAT (PT_RESERVED+4) +#define PT_LB1 (PT_ASTAT+4) +#define PT_LB0 (PT_LB1+4) +#define PT_LT1 (PT_LB0+4) +#define PT_LT0 (PT_LT1+4) +#define PT_LC1 (PT_LT0+4) +#define PT_LC0 (PT_LC1+4) +#define PT_A1W (PT_LC0+4) +#define PT_A1X (PT_A1W+4) +#define PT_A0W (PT_A1X+4) +#define PT_A0X (PT_A0W+4) +#define PT_B3 (PT_A0X+4) +#define PT_B2 (PT_B3+4) +#define PT_B1 (PT_B2+4) +#define PT_B0 (PT_B1+4) +#define PT_L3 (PT_B0+4) +#define PT_L2 (PT_L3+4) +#define PT_L1 (PT_L2+4) +#define PT_L0 (PT_L1+4) +#define PT_M3 (PT_L0+4) +#define PT_M2 (PT_M3+4) +#define PT_M1 (PT_M2+4) +#define PT_M0 (PT_M1+4) +#define PT_I3 (PT_M0+4) +#define PT_I2 (PT_I3+4) +#define PT_I1 (PT_I2+4) +#define PT_I0 (PT_I1+4) +#define PT_USP (PT_I0+4) +#define PT_FP (PT_USP+4) +#define PT_P5 (PT_FP+4) +#define PT_P4 (PT_P5+4) +#define PT_P3 (PT_P4+4) +#define PT_P2 (PT_P3+4) +#define PT_P1 (PT_P2+4) +#define PT_P0 (PT_P1+4) +#define PT_R7 (PT_P0+4) +#define PT_R6 (PT_R7+4) +#define PT_R5 (PT_R6+4) +#define PT_R4 (PT_R5+4) +#define PT_R3 (PT_R4+4) +#define PT_R2 (PT_R3+4) +#define PT_R1 (PT_R2+4) +#define PT_R0 (PT_R1+4) +#define PT_ORIG_R0 (PT_R0+4) +#define PT_SR PT_SEQSTAT + +#else +/* + * Here utilize blackfin : dpregs = [pregs + imm16s4] + * [pregs + imm16s4] = dpregs + * to access defferent saved reg in stack + */ +#define PT_R3 0 +#define PT_R4 4 +#define PT_R2 8 +#define PT_R1 12 +#define PT_P5 16 +#define PT_P4 20 +#define PT_P3 24 +#define PT_P2 28 +#define PT_P1 32 +#define PT_P0 36 +#define PT_R7 40 +#define PT_R6 44 +#define PT_R5 48 +#define PT_PC 52 +#define PT_SEQSTAT 56 /* so-called SR reg */ +#define PT_SR PT_SEQSTAT +#define PT_ASTAT 60 +#define PT_RETS 64 +#define PT_A1w 68 +#define PT_A0w 72 +#define PT_A1x 76 +#define PT_A0x 80 +#define PT_ORIG_R0 84 +#define PT_R0 88 +#define PT_USP 92 +#define PT_FP 96 +#define PT_SP 100 + +/* Added by HuTao, May26 2003 3:18PM */ +#define PT_IPEND 100 + +/* Add SYSCFG register for single stepping support */ +#define PT_SYSCFG 104 + +#endif + +#ifndef __ASSEMBLY__ + +#if defined(NEW_PT_REGS) +/* this struct defines the way the registers are stored on the + * stack during a system call. + */ +struct pt_regs { + long ipend; + long syscfg; + long seqstat; + long rete; + long retn; + long retx; + long pc; + long rets; + long reserved; + long astat; + long lb1; + long lb0; + long lt1; + long lt0; + long lc1; + long lc0; + long a1w; + long a1x; + long a0w; + long a0x; + long b3; + long b2; + long b1; + long b0; + long l3; + long l2; + long l1; + long l0; + long m3; + long m2; + long m1; + long m0; + long i3; + long i2; + long i1; + long i0; + long usp; + long fp; + long p5; + long p4; + long p3; + long p2; + long p1; + long p0; + long r7; + long r6; + long r5; + long r4; + long r3; + long r2; + long r1; + long r0; + long orig_r0; +}; + +#else +/* now we don't know what regs the system call will use */ +struct pt_regs { + long r3; + long r4; + long r2; + long r1; + long p5; + long p4; + long p3; + long p2; + long p1; + long p0; + long r7; + long r6; + long r5; + unsigned long pc; + unsigned long seqstat; + unsigned long astat; + unsigned long rets; + long a1w; + long a0w; + long a1x; + long a0x; + long orig_r0; + long r0; + long usp; + long fp; +/* + * Added for supervisor/user mode switch. + * + * HuTao May26 03 3:23PM + */ + long ipend; + long syscfg; +}; + +#endif + +/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 /* ptrace signal */ + +#ifdef __KERNEL__ + +#ifndef PS_S +#define PS_S (0x0c00) + +/* Bit 11:10 of SEQSTAT defines user/supervisor/debug mode + * 00: user + * 01: supervisor + * 1x: debug + */ + +#define PS_M (0x1000) /* I am not sure why this is required here Akbar */ +#endif + +#define user_mode(regs) (!((regs)->seqstat & PS_S)) +#define instruction_pointer(regs) ((regs)->pc) +extern void show_regs(struct pt_regs *); + +#endif +#endif +#endif diff --git a/include/asm-blackfin/segment.h b/include/asm-blackfin/segment.h new file mode 100644 index 00000000000..9e6d817fc74 --- /dev/null +++ b/include/asm-blackfin/segment.h @@ -0,0 +1,46 @@ +/* + * U-boot - segment.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_SEGMENT_H +#define _BLACKFIN_SEGMENT_H + +/* define constants */ +typedef unsigned long mm_segment_t; /* domain register */ + +#define KERNEL_CS 0x0 +#define KERNEL_DS 0x0 +#define __KERNEL_CS 0x0 +#define __KERNEL_DS 0x0 + +#define USER_CS 0x1 +#define USER_DS 0x1 +#define __USER_CS 0x1 +#define __USER_DS 0x1 + +#define get_ds() (KERNEL_DS) +#define get_fs() (__USER_DS) +#define segment_eq(a,b) ((a) == (b)) +#define set_fs(val) + +#endif diff --git a/include/asm-blackfin/setup.h b/include/asm-blackfin/setup.h new file mode 100644 index 00000000000..6ce96880ac3 --- /dev/null +++ b/include/asm-blackfin/setup.h @@ -0,0 +1,86 @@ +/* + * U-boot - setup.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * asm/setup.h -- Definition of the Linux/Blackfin setup information + * Copyright Lineo, Inc 2001 Tony Kou + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_SETUP_H +#define _BLACKFIN_SETUP_H + +#include <linux/config.h> + +/* + * Linux/Blackfin Architectures + */ + +#define MACH_BFIN 1 + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ +extern unsigned long blackfin_machtype; +#endif + +#if defined(CONFIG_BFIN) +#define MACH_IS_BFIN (blackfin_machtype == MACH_BFIN) +#endif + +#ifndef MACH_TYPE +#define MACH_TYPE (blackfin_machtype) +#endif + +#endif + +/* + * CPU, FPU and MMU types + * + * Note: we don't need now: + * + */ + +#ifndef __ASSEMBLY__ +extern unsigned long blackfin_cputype; +#ifdef CONFIG_VME +extern unsigned long vme_brdtype; +#endif + +/* + * Miscellaneous + */ + +#define NUM_MEMINFO 4 +#define CL_SIZE 256 + +extern int blackfin_num_memory; /* # of memory blocks found (and used) */ +extern int blackfin_realnum_memory; /* real # of memory blocks found */ +extern struct mem_info blackfin_memory[NUM_MEMINFO]; /* memory description */ + +struct mem_info { + unsigned long addr; /* physical address of memory chunk */ + unsigned long size; /* length of memory chunk (in bytes) */ +}; +#endif + +#endif diff --git a/include/asm-blackfin/shared_resources.h b/include/asm-blackfin/shared_resources.h new file mode 100644 index 00000000000..fbef18618ce --- /dev/null +++ b/include/asm-blackfin/shared_resources.h @@ -0,0 +1,33 @@ +/* + * U-boot - setup.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SHARED_RESOURCES_H_ +#define _SHARED_RESOURCES_H_ + +void swap_to(int device_id); + +#define FLASH 0 +#define ETHERNET 1 + +#endif /* _SHARED_RESOURCES_H_ */ diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h new file mode 100644 index 00000000000..ffd81d61a8b --- /dev/null +++ b/include/asm-blackfin/string.h @@ -0,0 +1,79 @@ +/* + * U-boot - string.h String functions + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Changed by Lineo Inc. May 2001 */ + +#ifndef _BLACKFINNOMMU_STRING_H_ +#define _BLACKFINNOMMU_STRING_H_ + +#ifdef __KERNEL__ /* only set these up for kernel code */ + +#include <asm/setup.h> +#include <asm/page.h> +#include <asm/cpu/defBF533.h> + +#define __HAVE_ARCH_STRCPY +#define __HAVE_ARCH_STRNCPY +#define __HAVE_ARCH_STRCMP +#define __HAVE_ARCH_STRNCMP +#define __HAVE_ARCH_MEMCPY + +extern char *strcpy(char *dest, const char *src); +extern char *strncpy(char *dest, const char *src, size_t n); +extern int strcmp(const char *cs, const char *ct); +extern int strncmp(const char *cs, const char *ct, size_t count); +extern void * memcpy(void * dest,const void *src,size_t count); +extern void *memset(void *s, int c, size_t count); +extern int memcmp(const void *, const void *, __kernel_size_t); + +#else /* KERNEL */ + +/* + * let user libraries deal with these, + * IMHO the kernel has no place defining these functions for user apps + */ + +#define __HAVE_ARCH_STRCPY 1 +#define __HAVE_ARCH_STRNCPY 1 +#define __HAVE_ARCH_STRCAT 1 +#define __HAVE_ARCH_STRNCAT 1 +#define __HAVE_ARCH_STRCMP 1 +#define __HAVE_ARCH_STRNCMP 1 +#define __HAVE_ARCH_STRNICMP 1 +#define __HAVE_ARCH_STRCHR 1 +#define __HAVE_ARCH_STRRCHR 1 +#define __HAVE_ARCH_STRSTR 1 +#define __HAVE_ARCH_STRLEN 1 +#define __HAVE_ARCH_STRNLEN 1 +#define __HAVE_ARCH_MEMSET 1 +#define __HAVE_ARCH_MEMCPY 1 +#define __HAVE_ARCH_MEMMOVE 1 +#define __HAVE_ARCH_MEMSCAN 1 +#define __HAVE_ARCH_MEMCMP 1 +#define __HAVE_ARCH_MEMCHR 1 +#define __HAVE_ARCH_STRTOK 1 + +#endif /* KERNEL */ + +#endif /* _BLACKFIN_STRING_H_ */ diff --git a/include/asm-blackfin/system.h b/include/asm-blackfin/system.h new file mode 100644 index 00000000000..0e53adfe0f1 --- /dev/null +++ b/include/asm-blackfin/system.h @@ -0,0 +1,182 @@ +/* + * U-boot - system.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_SYSTEM_H +#define _BLACKFIN_SYSTEM_H + +#include <linux/config.h> /* get configuration macros */ +#include <asm/linkage.h> +#include <asm/blackfin.h> +#include <asm/segment.h> +#include <asm/entry.h> + +#define prepare_to_switch() do { } while(0) + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. This + * also clears the TS-flag if the task we switched to has used the + * math co-processor latest. + * + * 05/25/01 - Tony Kou (tonyko@lineo.ca) + * + * Adapted for BlackFin (ADI) by Ted Ma, Metrowerks, and Motorola GSG + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2003 Metrowerks (www.metrowerks.com) + */ + +asmlinkage void resume(void); + +#define switch_to(prev,next,last) { \ + void *_last; \ + __asm__ __volatile__( \ + "r0 = %1;\n\t" \ + "r1 = %2;\n\t" \ + "call resume;\n\t" \ + "%0 = r0;\n\t" \ + : "=d" (_last) \ + : "d" (prev), \ + "d" (next) \ + : "CC", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1");\ + (last) = _last; \ +} + +/* Force kerenl switch to user mode -- Steven Chen */ +#define switch_to_user_mode() { \ + __asm__ __volatile__( \ + "call kernel_to_user_mode;\n\t" \ + :: \ + : "CC", "R0", "R1", "R2", "R3", "R4", "R5", "P0", "P1");\ +} + +/* + * Interrupt configuring macros. + */ + +extern int irq_flags; + +#define __sti() { \ + __asm__ __volatile__ ( \ + "r3 = %0;" \ + "sti r3;" \ + ::"m"(irq_flags):"R3"); \ +} + +#define __cli() { \ + __asm__ __volatile__ ( \ + "cli r3;" \ + :::"R3"); \ +} + +#define __save_flags(x) { \ + __asm__ __volatile__ ( \ + "cli r3;" \ + "%0 = r3;" \ + "sti r3;" \ + ::"m"(x):"R3"); \ +} + +#define __save_and_cli(x) { \ + __asm__ __volatile__ ( \ + "cli r3;" \ + "%0 = r3;" \ + ::"m"(x):"R3"); \ +} + +#define __restore_flags(x) { \ + __asm__ __volatile__ ( \ + "r3 = %0;" \ + "sti r3;" \ + ::"m"(x):"R3"); \ +} + +/* For spinlocks etc */ +#define local_irq_save(x) __save_and_cli(x) +#define local_irq_restore(x) __restore_flags(x) +#define local_irq_disable() __cli() +#define local_irq_enable() __sti() + +#define cli() __cli() +#define sti() __sti() +#define save_flags(x) __save_flags(x) +#define restore_flags(x) __restore_flags(x) +#define save_and_cli(x) __save_and_cli(x) + +/* + * Force strict CPU ordering. + */ +#define nop() asm volatile ("nop;\n\t"::) +#define mb() asm volatile ("" : : :"memory") +#define rmb() asm volatile ("" : : :"memory") +#define wmb() asm volatile ("" : : :"memory") +#define set_rmb(var, value) do { xchg(&var, value); } while (0) +#define set_mb(var, value) set_rmb(var, value) +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#endif + +#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) +#define tas(ptr) (xchg((ptr),1)) + +struct __xchg_dummy { + unsigned long a[100]; +}; +#define __xg(x) ((volatile struct __xchg_dummy *)(x)) + +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, + int size) +{ + unsigned long tmp; + unsigned long flags = 0; + + save_and_cli(flags); + + switch (size) { + case 1: + __asm__ __volatile__("%0 = %2;\n\t" "%2 = %1;\n\t": "=&d"(tmp): "d"(x), "m"(*__xg(ptr)):"memory"); + break; + case 2: + __asm__ __volatile__("%0 = %2;\n\t" "%2 = %1;\n\t": "=&d"(tmp): "d"(x), "m"(*__xg(ptr)):"memory"); + break; + case 4: + __asm__ __volatile__("%0 = %2;\n\t" "%2 = %1;\n\t": "=&d"(tmp): "d"(x), "m"(*__xg(ptr)):"memory"); + break; + } + restore_flags(flags); + return tmp; +} + +/* Depend on whether Blackfin has hard reset function */ +/* YES it does, but it is tricky to implement - FIXME later ...MaTed--- */ +#define HARD_RESET_NOW() ({}) + +#endif /* _BLACKFIN_SYSTEM_H */ diff --git a/include/asm-blackfin/traps.h b/include/asm-blackfin/traps.h new file mode 100644 index 00000000000..29e6eba6fac --- /dev/null +++ b/include/asm-blackfin/traps.h @@ -0,0 +1,86 @@ +/* + * U-boot - traps.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * linux/include/asm/traps.h + * Copyright (C) 1993 Hamish Macdonald + * Lineo, Inc Jul 2001 Tony Kou + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + */ + +#ifndef _BLACKFIN_TRAPS_H +#define _BLACKFIN_TRAPS_H + +#ifndef __ASSEMBLY__ +typedef void (*e_vector) (void); +extern e_vector vectors[]; +#endif + +#define VEC_SYS (0) +#define VEC_EXCPT01 (1) +#define VEC_EXCPT02 (2) +#define VEC_EXCPT03 (3) +#define VEC_EXCPT04 (4) +#define VEC_EXCPT05 (5) +#define VEC_EXCPT06 (6) +#define VEC_EXCPT07 (7) +#define VEC_EXCPT08 (8) +#define VEC_EXCPT09 (9) +#define VEC_EXCPT10 (10) +#define VEC_EXCPT11 (11) +#define VEC_EXCPT12 (12) +#define VEC_EXCPT13 (13) +#define VEC_EXCPT14 (14) +#define VEC_EXCPT15 (15) +#define VEC_STEP (16) +#define VEC_OVFLOW (17) +#define VEC_UNDEF_I (33) +#define VEC_ILGAL_I (34) +#define VEC_CPLB_VL (35) +#define VEC_MISALI_D (36) +#define VEC_UNCOV (37) +#define VEC_CPLB_M (38) +#define VEC_CPLB_MHIT (39) +#define VEC_WATCH (40) +#define VEC_ISTRU_VL (41) +#define VEC_MISALI_I (42) +#define VEC_CPLB_I_VL (43) +#define VEC_CPLB_I_M (44) +#define VEC_CPLB_I_MHIT (45) +#define VEC_ILL_RES (46) /* including unvalid supervisor mode insn */ + +#define VECOFF(vec) ((vec)<<2) + +#ifndef __ASSEMBLY__ + +/* Status register bits */ +#define PS_T (0x8000) +#define PS_S (0x0c00) /* Supervisor mode = 0b01 */ +#define PS_D (0x0c00) /* Debug mode = 0b1x */ +#define PS_M (0x1000) +#define PS_C (0x0001) + +#endif +#endif diff --git a/include/asm-blackfin/types.h b/include/asm-blackfin/types.h new file mode 100644 index 00000000000..942ed275af7 --- /dev/null +++ b/include/asm-blackfin/types.h @@ -0,0 +1,83 @@ +/* + * U-boot - types.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BLACKFIN_TYPES_H +#define _BLACKFIN_TYPES_H + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +/* HK0617 -- Changes to unsigned long temporarily */ +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +#define BITS_PER_LONG 32 + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#endif + +#endif diff --git a/include/asm-blackfin/u-boot.h b/include/asm-blackfin/u-boot.h new file mode 100644 index 00000000000..ec393380390 --- /dev/null +++ b/include/asm-blackfin/u-boot.h @@ -0,0 +1,47 @@ +/* + * U-boot - u-boot.h Structure declarations for board specific data + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _U_BOOT_H_ +#define _U_BOOT_H_ 1 + +typedef struct bd_info { + int bi_baudrate; /* serial console baudrate */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet adress */ + unsigned long bi_arch_number; /* unique id for this board */ + unsigned long bi_boot_params; /* where this board expects params */ + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ +} bd_t; + +#define bi_env_data bi_env->data +#define bi_env_crc bi_env->crc + +#endif /* _U_BOOT_H_ */ diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h new file mode 100644 index 00000000000..8578166a37e --- /dev/null +++ b/include/asm-blackfin/uaccess.h @@ -0,0 +1,207 @@ +/* + * U-boot - uaccess.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * Based on: include/asm-m68knommu/uaccess.h + * Changes made by Lineo Inc. May 2001 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BLACKFIN_UACCESS_H +#define __BLACKFIN_UACCESS_H + +/* + * User space memory access functions + */ +#include <asm/segment.h> +#include <asm/errno.h> + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* We let the MMU do all checking */ +static inline int access_ok(int type, const void *addr, unsigned long size) +{ + return ((unsigned long) addr < 0x10f00000); /* need final decision - Tony */ +} + +static inline int verify_area(int type, const void *addr, + unsigned long size) +{ + return access_ok(type, addr, size) ? 0 : -EFAULT; +} + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry { + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ + +#define put_user(x, ptr) \ +({ \ + int __pu_err = 0; \ + typeof(*(ptr)) __pu_val = (x); \ + switch (sizeof (*(ptr))) { \ + case 1: \ + __put_user_asm(__pu_err, __pu_val, ptr, B); \ + break; \ + case 2: \ + __put_user_asm(__pu_err, __pu_val, ptr, W); \ + break; \ + case 4: \ + __put_user_asm(__pu_err, __pu_val, ptr, ); \ + break; \ + default: \ + __pu_err = __put_user_bad(); \ + break; \ + } \ + __pu_err; \ +}) +/* + * [pregs] = dregs ==> 32bits + * H[pregs] = dregs ==> 16bits + * B[pregs] = dregs ==> 8 bits + */ + +#define __put_user(x, ptr) put_user(x, ptr) + +static inline int bad_user_access_length(void) +{ + panic("bad_user_access_length"); + return -1; +} + +#define __put_user_bad() (bad_user_access_length(), (-EFAULT)) + +/* + * Tell gcc we read from memory instead of writing: this is because + * we do not write to any memory gcc knows about, so there are no + * aliasing issues. + */ + +#define __ptr(x) ((unsigned long *)(x)) + +#define __put_user_asm(err,x,ptr,bhw) \ + __asm__ (#bhw"[%1] = %0;\n\t" \ + : /* no outputs */ \ + :"d" (x),"a" (__ptr(ptr)) : "memory") + +#define get_user(x, ptr) \ +({ \ + int __gu_err = 0; \ + typeof(*(ptr)) __gu_val = 0; \ + switch (sizeof(*(ptr))) { \ + case 1: \ + __get_user_asm(__gu_err, __gu_val, ptr, B, "=d",(Z)); \ + break; \ + case 2: \ + __get_user_asm(__gu_err, __gu_val, ptr, W, "=r",(Z)); \ + break; \ + case 4: \ + __get_user_asm(__gu_err, __gu_val, ptr, , "=r",); \ + break; \ + default: \ + __gu_val = 0; \ + __gu_err = __get_user_bad(); \ + break; \ + } \ + (x) = __gu_val; \ + __gu_err; \ +}) + +/* dregs = [pregs] ==> 32bits + * H[pregs] ==> 16bits + * B[pregs] ==> 8 bits + */ + +#define __get_user(x, ptr) get_user(x, ptr) +#define __get_user_bad() (bad_user_access_length(), (-EFAULT)) + +#define __get_user_asm(err,x,ptr,bhw,reg,option) \ + __asm__ ("%0 =" #bhw "[%1]"#option";\n\t" \ + : "=d" (x) \ + : "a" (__ptr(ptr))) + +#define copy_from_user(to, from, n) (memcpy(to, from, n), 0) +#define copy_to_user(to, from, n) (memcpy(to, from, n), 0) + +#define __copy_from_user(to, from, n) copy_from_user(to, from, n) +#define __copy_to_user(to, from, n) copy_to_user(to, from, n) + +#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; }) +#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; }) + +/* + * Copy a null terminated string from userspace. + */ + +static inline long strncpy_from_user(char *dst, const char *src, + long count) +{ + char *tmp; + strncpy(dst, src, count); + for (tmp = dst; *tmp && count > 0; tmp++, count--); + return (tmp - dst); /* DAVIDM should we count a NUL ? check getname */ +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 on exception, a value greater than N if too long + */ +static inline long strnlen_user(const char *src, long n) +{ + return (strlen(src) + 1); /* DAVIDM make safer */ +} + +#define strlen_user(str) strnlen_user(str, 32767) + +/* + * Zero Userspace + */ + +static inline unsigned long clear_user(void *to, unsigned long n) +{ + memset(to, 0, n); + return (0); +} + +#endif diff --git a/include/asm-blackfin/virtconvert.h b/include/asm-blackfin/virtconvert.h new file mode 100644 index 00000000000..769f5a089c0 --- /dev/null +++ b/include/asm-blackfin/virtconvert.h @@ -0,0 +1,47 @@ +/* + * U-boot - virtconvert.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __BLACKFIN_VIRT_CONVERT__ +#define __BLACKFIN_VIRT_CONVERT__ + +/* + * Macros used for converting between virtual and physical mappings. + */ + +#ifdef __KERNEL__ + +#include <linux/config.h> +#include <asm/setup.h> +#include <asm/page.h> + +#define mm_vtop(vaddr) ((unsigned long) vaddr) +#define mm_ptov(vaddr) ((unsigned long) vaddr) +#define phys_to_virt(vaddr) ((unsigned long) vaddr) +#define virt_to_phys(vaddr) ((unsigned long) vaddr) + +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + +#endif +#endif diff --git a/include/asm-m68k/immap_5271.h b/include/asm-m68k/immap_5271.h new file mode 100644 index 00000000000..424dc1d1ffb --- /dev/null +++ b/include/asm-m68k/immap_5271.h @@ -0,0 +1,98 @@ +/* + * MCF5272 Internal Memory Map + * + * Copyright (c) 2003 Josef Baumgartner <josef.baumgartner@telex.de> + * 2006 Zachary P. Landau <zachary.landau@labxtechnologies.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5271__ +#define __IMMAP_5271__ + +/* Interrupt module registers +*/ +typedef struct int_ctrl { + uint int_icr1; + uint int_icr2; + uint int_icr3; + uint int_icr4; + uint int_isr; + uint int_pitr; + uint int_piwr; + uchar res1[3]; + uchar int_pivr; +} intctrl_t; + +/* Timer module registers + */ +typedef struct timer_ctrl { + ushort timer_tmr; + ushort res1; + ushort timer_trr; + ushort res2; + ushort timer_tcap; + ushort res3; + ushort timer_tcn; + ushort res4; + ushort timer_ter; + uchar res5[14]; +} timer_t; + + /* Fast ethernet controller registers + */ +typedef struct fec { + uint res1; + uint fec_ievent; + uint fec_imask; + uint res2; + uint fec_r_des_active; + uint fec_x_des_active; + uint res3[3]; + uint fec_ecntrl; + uint res4[6]; + uint fec_mii_data; + uint fec_mii_speed; + uint res5[7]; + uint fec_mibc; + uint res6[7]; + uint fec_r_cntrl; + uint res7[15]; + uint fec_x_cntrl; + uint res8[7]; + uint fec_addr_low; + uint fec_addr_high; + uint fec_opd; + uint res9[10]; + uint fec_ihash_table_high; + uint fec_ihash_table_low; + uint fec_ghash_table_high; + uint fec_ghash_table_low; + uint res10[7]; + uint fec_tfwr; + uint res11; + uint fec_r_bound; + uint fec_r_fstart; + uint res12[11]; + uint fec_r_des_start; + uint fec_x_des_start; + uint fec_r_buff_size; +} fec_t; + +#endif /* __IMMAP_5271__ */ diff --git a/include/asm-m68k/immap_5282.h b/include/asm-m68k/immap_5282.h index f2b77db8711..6553b08696a 100644 --- a/include/asm-m68k/immap_5282.h +++ b/include/asm-m68k/immap_5282.h @@ -13,7 +13,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -25,39 +25,61 @@ #ifndef __IMMAP_5282__ #define __IMMAP_5282__ +struct sys_ctrl { + uint ipsbar; + char res1[4]; + uint rambar; + char res2[4]; + uchar crsr; + uchar cwcr; + uchar lpicr; + uchar cwsr; + uint dmareqc; + char res3[4]; + uint mpark; + + /* TODO: finish these */ +}; /* Fast ethernet controller registers */ typedef struct fec { - uint fec_ecntrl; /* ethernet control register */ - uint fec_ievent; /* interrupt event register */ - uint fec_imask; /* interrupt mask register */ - uint fec_ivec; /* interrupt level and vector status */ - uint fec_r_des_active; /* Rx ring updated flag */ - uint fec_x_des_active; /* Tx ring updated flag */ - uint res3[10]; /* reserved */ - uint fec_mii_data; /* MII data register */ - uint fec_mii_speed; /* MII speed control register */ - uint res4[17]; /* reserved */ - uint fec_r_bound; /* end of RAM (read-only) */ - uint fec_r_fstart; /* Rx FIFO start address */ - uint res5[6]; /* reserved */ - uint fec_x_fstart; /* Tx FIFO start address */ - uint res7[21]; /* reserved */ - uint fec_r_cntrl; /* Rx control register */ - uint fec_r_hash; /* Rx hash register */ - uint res8[14]; /* reserved */ - uint fec_x_cntrl; /* Tx control register */ - uint res9[0x9e]; /* reserved */ - uint fec_addr_low; /* lower 32 bits of station address */ - uint fec_addr_high; /* upper 16 bits of station address */ - uint fec_hash_table_high; /* upper 32-bits of hash table */ - uint fec_hash_table_low; /* lower 32-bits of hash table */ - uint fec_r_des_start; /* beginning of Rx descriptor ring */ - uint fec_x_des_start; /* beginning of Tx descriptor ring */ - uint fec_r_buff_size; /* Rx buffer size */ - uint res2[9]; /* reserved */ - uchar fec_fifo[960]; /* fifo RAM */ + uint res1; /* reserved 1000*/ + uint fec_ievent; /* interrupt event register 1004*/ /* EIR */ + uint fec_imask; /* interrupt mask register 1008*/ /* EIMR */ + uint res2; /* reserved 100c*/ + uint fec_r_des_active; /* Rx ring updated flag 1010*/ /* RDAR */ + uint fec_x_des_active; /* Tx ring updated flag 1014*/ /* XDAR */ + uint res3[3]; /* reserved 1018*/ + uint fec_ecntrl; /* ethernet control register 1024*/ /* ECR */ + uint res4[6]; /* reserved 1028*/ + uint fec_mii_data; /* MII data register 1040*/ /* MDATA */ + uint fec_mii_speed; /* MII speed control register 1044*/ /* MSCR */ + /*1044*/ + uint res5[7]; /* reserved 1048*/ + uint fec_mibc; /* MIB Control/Status register 1064*/ /* MIBC */ + uint res6[7]; /* reserved 1068*/ + uint fec_r_cntrl; /* Rx control register 1084*/ /* RCR */ + uint res7[15]; /* reserved 1088*/ + uint fec_x_cntrl; /* Tx control register 10C4*/ /* TCR */ + uint res8[7]; /* reserved 10C8*/ + uint fec_addr_low; /* lower 32 bits of station address */ /* PALR */ + uint fec_addr_high; /* upper 16 bits of station address */ /* PAUR */ + uint fec_opd; /* opcode + pause duration 10EC*/ /* OPD */ + uint res9[10]; /* reserved 10F0*/ + uint fec_ihash_table_high; /* upper 32-bits of individual hash */ /* IAUR */ + uint fec_ihash_table_low; /* lower 32-bits of individual hash */ /* IALR */ + uint fec_ghash_table_high; /* upper 32-bits of group hash */ /* GAUR */ + uint fec_ghash_table_low; /* lower 32-bits of group hash */ /* GALR */ + uint res10[7]; /* reserved 1128*/ + uint fec_tfwr; /* Transmit FIFO watermark 1144*/ /* TFWR */ + uint res11; /* reserved 1148*/ + uint fec_r_bound; /* FIFO Receive Bound Register = end of */ /* FRBR */ + uint fec_r_fstart; /* FIFO Receive FIfo Start Registers = */ /* FRSR */ + uint res12[11]; /* reserved 1154*/ + uint fec_r_des_start;/* beginning of Rx descriptor ring 1180*/ /* ERDSR */ + uint fec_x_des_start;/* beginning of Tx descriptor ring 1184*/ /* ETDSR */ + uint fec_r_buff_size;/* Rx buffer size 1188*/ /* EMRBR */ } fec_t; #endif /* __IMMAP_5282__ */ diff --git a/include/asm-m68k/m5271.h b/include/asm-m68k/m5271.h new file mode 100644 index 00000000000..765414fdc32 --- /dev/null +++ b/include/asm-m68k/m5271.h @@ -0,0 +1,114 @@ +/* + * mcf5271.h -- Definitions for Motorola Coldfire 5271 + * + * (C) Copyright 2006, Lab X Technologies <zachary.landau@labxtechnologies.com> + * Based on mcf5272sim.h of uCLinux distribution: + * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) + * (C) Copyright 2000, Lineo Inc. (www.lineo.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef _MCF5271_H_ +#define _MCF5271_H_ + +#define mbar_readLong(x) *((volatile unsigned long *) (CFG_MBAR + x)) +#define mbar_readShort(x) *((volatile unsigned short *) (CFG_MBAR + x)) +#define mbar_readByte(x) *((volatile unsigned char *) (CFG_MBAR + x)) +#define mbar_writeLong(x,y) *((volatile unsigned long *) (CFG_MBAR + x)) = y +#define mbar_writeShort(x,y) *((volatile unsigned short *) (CFG_MBAR + x)) = y +#define mbar_writeByte(x,y) *((volatile unsigned char *) (CFG_MBAR + x)) = y + +#define MCF_FMPLL_SYNCR 0x120000 +#define MCF_FMPLL_SYNSR 0x120004 +#define MCF_FMPLL_SYNCR_MFD(x) ((x&0x7)<<24) +#define MCF_FMPLL_SYNCR_RFD(x) ((x&0x7)<<19) +#define MCF_FMPLL_SYNSR_LOCK 0x8 + +#define MCF_WTM_WCR 0x140000 +#define MCF_WTM_WCNTR 0x140004 +#define MCF_WTM_WSR 0x140006 +#define MCF_WTM_WCR_EN 0x0001 + +#define MCF_RCM_RCR 0x110000 +#define MCF_RCM_RCR_FRCRSTOUT 0x40 +#define MCF_RCM_RCR_SOFTRST 0x80 + +#define MCF_GPIO_PAR_AD 0x100040 +#define MCF_GPIO_PAR_CS 0x100045 +#define MCF_GPIO_PAR_SDRAM 0x100046 +#define MCF_GPIO_PAR_FECI2C 0x100047 +#define MCF_GPIO_PAR_UART 0x100048 + +#define MCF_GPIO_AD_ADDR23 0x80 +#define MCF_GPIO_AD_ADDR22 0x40 +#define MCF_GPIO_AD_ADDR21 0x20 +#define MCF_GPIO_AD_DATAL 0x01 +#define MCF_GPIO_AD_MASK 0xe1 + +#define MCF_GPIO_PAR_CS_PAR_CS2 0x04 + +#define MCF_GPIO_SDRAM_CSSDCS_00 0x00 /* CS[3:2] pins: CS3, CS2 */ +#define MCF_GPIO_SDRAM_CSSDCS_01 0x40 /* CS[3:2] pins: CS3, SD_CS0 */ +#define MCF_GPIO_SDRAM_CSSDCS_10 0x80 /* CS[3:2] pins: SD_CS1, SC2 */ +#define MCF_GPIO_SDRAM_CSSDCS_11 0xc0 /* CS[3:2] pins: SD_CS1, SD_CS0 */ +#define MCF_GPIO_SDRAM_SDWE 0x20 /* WE pin */ +#define MCF_GPIO_SDRAM_SCAS 0x10 /* CAS pin */ +#define MCF_GPIO_SDRAM_SRAS 0x08 /* RAS pin */ +#define MCF_GPIO_SDRAM_SCKE 0x04 /* CKE pin */ +#define MCF_GPIO_SDRAM_SDCS_00 0x00 /* SD_CS[0:1] pins: GPIO, GPIO */ +#define MCF_GPIO_SDRAM_SDCS_01 0x01 /* SD_CS[0:1] pins: GPIO, SD_CS0 */ +#define MCF_GPIO_SDRAM_SDCS_10 0x02 /* SD_CS[0:1] pins: SD_CS1, GPIO */ +#define MCF_GPIO_SDRAM_SDCS_11 0x03 /* SD_CS[0:1] pins: SD_CS1, SD_CS0 */ + +#define MCF_GPIO_PAR_UART_U0RTS 0x0001 +#define MCF_GPIO_PAR_UART_U0CTS 0x0002 +#define MCF_GPIO_PAR_UART_U0TXD 0x0004 +#define MCF_GPIO_PAR_UART_U0RXD 0x0008 +#define MCF_GPIO_PAR_UART_U1RXD_UART1 0x0C00 +#define MCF_GPIO_PAR_UART_U1TXD_UART1 0x0300 + +#define MCF_GPIO_PAR_SDRAM_PAR_CSSDCS(x) (((x)&0x03)<<6) + +#define MCF_SDRAMC_DCR 0x000040 +#define MCF_SDRAMC_DACR0 0x000048 +#define MCF_SDRAMC_DMR0 0x00004C + +#define MCF_SDRAMC_DCR_RC(x) (((x)&0x01FF)<<0) +#define MCF_SDRAMC_DCR_RTIM(x) (((x)&0x0003)<<9) +#define MCF_SDRAMC_DCR_IS 0x0800 +#define MCF_SDRAMC_DCR_COC 0x1000 +#define MCF_SDRAMC_DCR_NAM 0x2000 + +#define MCF_SDRAMC_DACRn_IP 0x00000008 +#define MCF_SDRAMC_DACRn_PS(x) (((x)&0x00000003)<<4) +#define MCF_SDRAMC_DACRn_MRS 0x00000040 +#define MCF_SDRAMC_DACRn_CBM(x) (((x)&0x00000007)<<8) +#define MCF_SDRAMC_DACRn_CASL(x) (((x)&0x00000003)<<12) +#define MCF_SDRAMC_DACRn_RE 0x00008000 +#define MCF_SDRAMC_DACRn_BA(x) (((x)&0x00003FFF)<<18) + +#define MCF_SDRAMC_DMRn_BAM_8M 0x007C0000 +#define MCF_SDRAMC_DMRn_BAM_16M 0x00FC0000 +#define MCF_SDRAMC_DMRn_V 0x00000001 + +#define MCFSIM_ICR1 0x000C41 + +#endif /* _MCF5271_H_ */ diff --git a/include/asm-m68k/m5282.h b/include/asm-m68k/m5282.h index 073b0bc790d..e5058a46aac 100644 --- a/include/asm-m68k/m5282.h +++ b/include/asm-m68k/m5282.h @@ -1,9 +1,6 @@ /* * mcf5282.h -- Definitions for Motorola Coldfire 5282 * - * Based on mcf5282sim.h of uCLinux distribution: - * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) - * * See file CREDITS for list of people who contributed to this * project. * @@ -34,27 +31,515 @@ #define INT_RAM_SIZE 65536 +/* General Purpose I/O Module GPIO */ -/* - * Define the 5282 SIM register set addresses. - */ -#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ -#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ -#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ -#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ -#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ -#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ -#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ -#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ -#define MCFINTC_IRLR 0x18 /* */ -#define MCFINTC_IACKL 0x19 /* */ -#define MCFINTC_ICR0 0x40 /* Base ICR register */ - -#define MCFINT_UART0 13 /* Interrupt number for UART0 */ -#define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ - -#define MCF5282_GPIO_PUAPAR 0x10005C +#define MCFGPIO_PORTA (*(vu_char *) (CFG_MBAR+0x100000)) +#define MCFGPIO_PORTB (*(vu_char *) (CFG_MBAR+0x100001)) +#define MCFGPIO_PORTC (*(vu_char *) (CFG_MBAR+0x100002)) +#define MCFGPIO_PORTD (*(vu_char *) (CFG_MBAR+0x100003)) +#define MCFGPIO_PORTE (*(vu_char *) (CFG_MBAR+0x100004)) +#define MCFGPIO_PORTF (*(vu_char *) (CFG_MBAR+0x100005)) +#define MCFGPIO_PORTG (*(vu_char *) (CFG_MBAR+0x100006)) +#define MCFGPIO_PORTH (*(vu_char *) (CFG_MBAR+0x100007)) +#define MCFGPIO_PORTJ (*(vu_char *) (CFG_MBAR+0x100008)) +#define MCFGPIO_PORTDD (*(vu_char *) (CFG_MBAR+0x100009)) +#define MCFGPIO_PORTEH (*(vu_char *) (CFG_MBAR+0x10000A)) +#define MCFGPIO_PORTEL (*(vu_char *) (CFG_MBAR+0x10000B)) +#define MCFGPIO_PORTAS (*(vu_char *) (CFG_MBAR+0x10000C)) +#define MCFGPIO_PORTQS (*(vu_char *) (CFG_MBAR+0x10000D)) +#define MCFGPIO_PORTSD (*(vu_char *) (CFG_MBAR+0x10000E)) +#define MCFGPIO_PORTTC (*(vu_char *) (CFG_MBAR+0x10000F)) +#define MCFGPIO_PORTTD (*(vu_char *) (CFG_MBAR+0x100010)) +#define MCFGPIO_PORTUA (*(vu_char *) (CFG_MBAR+0x100011)) + +#define MCFGPIO_DDRA (*(vu_char *) (CFG_MBAR+0x100014)) +#define MCFGPIO_DDRB (*(vu_char *) (CFG_MBAR+0x100015)) +#define MCFGPIO_DDRC (*(vu_char *) (CFG_MBAR+0x100016)) +#define MCFGPIO_DDRD (*(vu_char *) (CFG_MBAR+0x100017)) +#define MCFGPIO_DDRE (*(vu_char *) (CFG_MBAR+0x100018)) +#define MCFGPIO_DDRF (*(vu_char *) (CFG_MBAR+0x100019)) +#define MCFGPIO_DDRG (*(vu_char *) (CFG_MBAR+0x10001A)) +#define MCFGPIO_DDRH (*(vu_char *) (CFG_MBAR+0x10001B)) +#define MCFGPIO_DDRJ (*(vu_char *) (CFG_MBAR+0x10001C)) +#define MCFGPIO_DDRDD (*(vu_char *) (CFG_MBAR+0x10001D)) +#define MCFGPIO_DDREH (*(vu_char *) (CFG_MBAR+0x10001E)) +#define MCFGPIO_DDREL (*(vu_char *) (CFG_MBAR+0x10001F)) +#define MCFGPIO_DDRAS (*(vu_char *) (CFG_MBAR+0x100020)) +#define MCFGPIO_DDRQS (*(vu_char *) (CFG_MBAR+0x100021)) +#define MCFGPIO_DDRSD (*(vu_char *) (CFG_MBAR+0x100022)) +#define MCFGPIO_DDRTC (*(vu_char *) (CFG_MBAR+0x100023)) +#define MCFGPIO_DDRTD (*(vu_char *) (CFG_MBAR+0x100024)) +#define MCFGPIO_DDRUA (*(vu_char *) (CFG_MBAR+0x100025)) + +#define MCFGPIO_PORTAP (*(vu_char *) (CFG_MBAR+0x100028)) +#define MCFGPIO_PORTBP (*(vu_char *) (CFG_MBAR+0x100029)) +#define MCFGPIO_PORTCP (*(vu_char *) (CFG_MBAR+0x10002A)) +#define MCFGPIO_PORTDP (*(vu_char *) (CFG_MBAR+0x10002B)) +#define MCFGPIO_PORTEP (*(vu_char *) (CFG_MBAR+0x10002C)) +#define MCFGPIO_PORTFP (*(vu_char *) (CFG_MBAR+0x10002D)) +#define MCFGPIO_PORTGP (*(vu_char *) (CFG_MBAR+0x10002E)) +#define MCFGPIO_PORTHP (*(vu_char *) (CFG_MBAR+0x10002F)) +#define MCFGPIO_PORTJP (*(vu_char *) (CFG_MBAR+0x100030)) +#define MCFGPIO_PORTDDP (*(vu_char *) (CFG_MBAR+0x100031)) +#define MCFGPIO_PORTEHP (*(vu_char *) (CFG_MBAR+0x100032)) +#define MCFGPIO_PORTELP (*(vu_char *) (CFG_MBAR+0x100033)) +#define MCFGPIO_PORTASP (*(vu_char *) (CFG_MBAR+0x100034)) +#define MCFGPIO_PORTQSP (*(vu_char *) (CFG_MBAR+0x100035)) +#define MCFGPIO_PORTSDP (*(vu_char *) (CFG_MBAR+0x100036)) +#define MCFGPIO_PORTTCP (*(vu_char *) (CFG_MBAR+0x100037)) +#define MCFGPIO_PORTTDP (*(vu_char *) (CFG_MBAR+0x100038)) +#define MCFGPIO_PORTUAP (*(vu_char *) (CFG_MBAR+0x100039)) + +#define MCFGPIO_SETA (*(vu_char *) (CFG_MBAR+0x100028)) +#define MCFGPIO_SETB (*(vu_char *) (CFG_MBAR+0x100029)) +#define MCFGPIO_SETC (*(vu_char *) (CFG_MBAR+0x10002A)) +#define MCFGPIO_SETD (*(vu_char *) (CFG_MBAR+0x10002B)) +#define MCFGPIO_SETE (*(vu_char *) (CFG_MBAR+0x10002C)) +#define MCFGPIO_SETF (*(vu_char *) (CFG_MBAR+0x10002D)) +#define MCFGPIO_SETG (*(vu_char *) (CFG_MBAR+0x10002E)) +#define MCFGPIO_SETH (*(vu_char *) (CFG_MBAR+0x10002F)) +#define MCFGPIO_SETJ (*(vu_char *) (CFG_MBAR+0x100030)) +#define MCFGPIO_SETDD (*(vu_char *) (CFG_MBAR+0x100031)) +#define MCFGPIO_SETEH (*(vu_char *) (CFG_MBAR+0x100032)) +#define MCFGPIO_SETEL (*(vu_char *) (CFG_MBAR+0x100033)) +#define MCFGPIO_SETAS (*(vu_char *) (CFG_MBAR+0x100034)) +#define MCFGPIO_SETQS (*(vu_char *) (CFG_MBAR+0x100035)) +#define MCFGPIO_SETSD (*(vu_char *) (CFG_MBAR+0x100036)) +#define MCFGPIO_SETTC (*(vu_char *) (CFG_MBAR+0x100037)) +#define MCFGPIO_SETTD (*(vu_char *) (CFG_MBAR+0x100038)) +#define MCFGPIO_SETUA (*(vu_char *) (CFG_MBAR+0x100039)) + +#define MCFGPIO_CLRA (*(vu_char *) (CFG_MBAR+0x10003C)) +#define MCFGPIO_CLRB (*(vu_char *) (CFG_MBAR+0x10003D)) +#define MCFGPIO_CLRC (*(vu_char *) (CFG_MBAR+0x10003E)) +#define MCFGPIO_CLRD (*(vu_char *) (CFG_MBAR+0x10003F)) +#define MCFGPIO_CLRE (*(vu_char *) (CFG_MBAR+0x100040)) +#define MCFGPIO_CLRF (*(vu_char *) (CFG_MBAR+0x100041)) +#define MCFGPIO_CLRG (*(vu_char *) (CFG_MBAR+0x100042)) +#define MCFGPIO_CLRH (*(vu_char *) (CFG_MBAR+0x100043)) +#define MCFGPIO_CLRJ (*(vu_char *) (CFG_MBAR+0x100044)) +#define MCFGPIO_CLRDD (*(vu_char *) (CFG_MBAR+0x100045)) +#define MCFGPIO_CLREH (*(vu_char *) (CFG_MBAR+0x100046)) +#define MCFGPIO_CLREL (*(vu_char *) (CFG_MBAR+0x100047)) +#define MCFGPIO_CLRAS (*(vu_char *) (CFG_MBAR+0x100048)) +#define MCFGPIO_CLRQS (*(vu_char *) (CFG_MBAR+0x100049)) +#define MCFGPIO_CLRSD (*(vu_char *) (CFG_MBAR+0x10004A)) +#define MCFGPIO_CLRTC (*(vu_char *) (CFG_MBAR+0x10004B)) +#define MCFGPIO_CLRTD (*(vu_char *) (CFG_MBAR+0x10004C)) +#define MCFGPIO_CLRUA (*(vu_char *) (CFG_MBAR+0x10004D)) + +#define MCFGPIO_PBCDPAR (*(vu_char *) (CFG_MBAR+0x100050)) +#define MCFGPIO_PFPAR (*(vu_char *) (CFG_MBAR+0x100051)) +#define MCFGPIO_PEPAR (*(vu_short *)(CFG_MBAR+0x100052)) +#define MCFGPIO_PJPAR (*(vu_char *) (CFG_MBAR+0x100054)) +#define MCFGPIO_PSDPAR (*(vu_char *) (CFG_MBAR+0x100055)) +#define MCFGPIO_PASPAR (*(vu_short *)(CFG_MBAR+0x100056)) +#define MCFGPIO_PEHLPAR (*(vu_char *) (CFG_MBAR+0x100058)) +#define MCFGPIO_PQSPAR (*(vu_char *) (CFG_MBAR+0x100059)) +#define MCFGPIO_PTCPAR (*(vu_char *) (CFG_MBAR+0x10005A)) +#define MCFGPIO_PTDPAR (*(vu_char *) (CFG_MBAR+0x10005B)) +#define MCFGPIO_PUAPAR (*(vu_char *) (CFG_MBAR+0x10005C)) + +/* Bit level definitions and macros */ +#define MCFGPIO_PORT7 (0x80) +#define MCFGPIO_PORT6 (0x40) +#define MCFGPIO_PORT5 (0x20) +#define MCFGPIO_PORT4 (0x10) +#define MCFGPIO_PORT3 (0x08) +#define MCFGPIO_PORT2 (0x04) +#define MCFGPIO_PORT1 (0x02) +#define MCFGPIO_PORT0 (0x01) +#define MCFGPIO_PORT(x) (0x01<<x) + +#define MCFGPIO_DDR7 (0x80) +#define MCFGPIO_DDR6 (0x40) +#define MCFGPIO_DDR5 (0x20) +#define MCFGPIO_DDR4 (0x10) +#define MCFGPIO_DDR3 (0x08) +#define MCFGPIO_DDR2 (0x04) +#define MCFGPIO_DDR1 (0x02) +#define MCFGPIO_DDR0 (0x01) +#define MCFGPIO_DDR(x) (0x01<<x) + +#define MCFGPIO_Px7 (0x80) +#define MCFGPIO_Px6 (0x40) +#define MCFGPIO_Px5 (0x20) +#define MCFGPIO_Px4 (0x10) +#define MCFGPIO_Px3 (0x08) +#define MCFGPIO_Px2 (0x04) +#define MCFGPIO_Px1 (0x02) +#define MCFGPIO_Px0 (0x01) +#define MCFGPIO_Px(x) (0x01<<x) + + +#define MCFGPIO_PBCDPAR_PBPA (0x80) +#define MCFGPIO_PBCDPAR_PCDPA (0x40) + +#define MCFGPIO_PEPAR_PEPA7 (0x4000) +#define MCFGPIO_PEPAR_PEPA6 (0x1000) +#define MCFGPIO_PEPAR_PEPA5 (0x0400) +#define MCFGPIO_PEPAR_PEPA4 (0x0100) +#define MCFGPIO_PEPAR_PEPA3 (0x0040) +#define MCFGPIO_PEPAR_PEPA2 (0x0010) +#define MCFGPIO_PEPAR_PEPA1(x) (((x)&0x3)<<2) +#define MCFGPIO_PEPAR_PEPA0(x) (((x)&0x3)) + +#define MCFGPIO_PFPAR_PFPA7 (0x80) +#define MCFGPIO_PFPAR_PFPA6 (0x40) +#define MCFGPIO_PFPAR_PFPA5 (0x20) + +#define MCFGPIO_PJPAR_PJPA7 (0x80) +#define MCFGPIO_PJPAR_PJPA6 (0x40) +#define MCFGPIO_PJPAR_PJPA5 (0x20) +#define MCFGPIO_PJPAR_PJPA4 (0x10) +#define MCFGPIO_PJPAR_PJPA3 (0x08) +#define MCFGPIO_PJPAR_PJPA2 (0x04) +#define MCFGPIO_PJPAR_PJPA1 (0x02) +#define MCFGPIO_PJPAR_PJPA0 (0x01) +#define MCFGPIO_PJPAR_PJPA(x) (0x01<<x) + +#define MCFGPIO_PSDPAR_PSDPA (0x80) + +#define MCFGPIO_PASPAR_PASPA5(x) (((x)&0x3)<<10) +#define MCFGPIO_PASPAR_PASPA4(x) (((x)&0x3)<<8) +#define MCFGPIO_PASPAR_PASPA3(x) (((x)&0x3)<<6) +#define MCFGPIO_PASPAR_PASPA2(x) (((x)&0x3)<<4) +#define MCFGPIO_PASPAR_PASPA1(x) (((x)&0x3)<<2) +#define MCFGPIO_PASPAR_PASPA0(x) (((x)&0x3)) + +#define MCFGPIO_PEHLPAR_PEHPA (0x80) +#define MCFGPIO_PEHLPAR_PELPA (0x40) + +#define MCFGPIO_PQSPAR_PQSPA6 (0x40) +#define MCFGPIO_PQSPAR_PQSPA5 (0x20) +#define MCFGPIO_PQSPAR_PQSPA4 (0x10) +#define MCFGPIO_PQSPAR_PQSPA3 (0x08) +#define MCFGPIO_PQSPAR_PQSPA2 (0x04) +#define MCFGPIO_PQSPAR_PQSPA1 (0x02) +#define MCFGPIO_PQSPAR_PQSPA0 (0x01) +#define MCFGPIO_PQSPAR_PQSPA(x) (0x01<<x) + +#define MCFGPIO_PTCPAR_PTCPA3(x) (((x)&0x3)<<6) +#define MCFGPIO_PTCPAR_PTCPA2(x) (((x)&0x3)<<4) +#define MCFGPIO_PTCPAR_PTCPA1(x) (((x)&0x3)<<2) +#define MCFGPIO_PTCPAR_PTCPA0(x) (((x)&0x3)) + +#define MCFGPIO_PTDPAR_PTDPA3(x) (((x)&0x3)<<6) +#define MCFGPIO_PTDPAR_PTDPA2(x) (((x)&0x3)<<4) +#define MCFGPIO_PTDPAR_PTDPA1(x) (((x)&0x3)<<2) +#define MCFGPIO_PTDPAR_PTDPA0(x) (((x)&0x3)) + +#define MCFGPIO_PUAPAR_PUAPA3 (0x08) +#define MCFGPIO_PUAPAR_PUAPA2 (0x04) +#define MCFGPIO_PUAPAR_PUAPA1 (0x02) +#define MCFGPIO_PUAPAR_PUAPA0 (0x01) + +/* System Conrol Module SCM */ + +#define MCFSCM_RAMBAR (*(vu_long *) (CFG_MBAR+0x00000008)) +#define MCFSCM_CRSR (*(vu_char *) (CFG_MBAR+0x00000010)) +#define MCFSCM_CWCR (*(vu_char *) (CFG_MBAR+0x00000011)) +#define MCFSCM_LPICR (*(vu_char *) (CFG_MBAR+0x00000012)) +#define MCFSCM_CWSR (*(vu_char *) (CFG_MBAR+0x00000013)) + +#define MCFSCM_MPARK (*(vu_long *) (CFG_MBAR+0x0000001C)) +#define MCFSCM_MPR (*(vu_char *) (CFG_MBAR+0x00000020)) +#define MCFSCM_PACR0 (*(vu_char *) (CFG_MBAR+0x00000024)) +#define MCFSCM_PACR1 (*(vu_char *) (CFG_MBAR+0x00000025)) +#define MCFSCM_PACR2 (*(vu_char *) (CFG_MBAR+0x00000026)) +#define MCFSCM_PACR3 (*(vu_char *) (CFG_MBAR+0x00000027)) +#define MCFSCM_PACR4 (*(vu_char *) (CFG_MBAR+0x00000028)) +#define MCFSCM_PACR5 (*(vu_char *) (CFG_MBAR+0x0000002A)) +#define MCFSCM_PACR6 (*(vu_char *) (CFG_MBAR+0x0000002B)) +#define MCFSCM_PACR7 (*(vu_char *) (CFG_MBAR+0x0000002C)) +#define MCFSCM_PACR8 (*(vu_char *) (CFG_MBAR+0x0000002E)) +#define MCFSCM_GPACR0 (*(vu_char *) (CFG_MBAR+0x00000030)) +#define MCFSCM_GPACR1 (*(vu_char *) (CFG_MBAR+0x00000031)) + + +#define MCFSCM_CRSR_EXT (0x80) +#define MCFSCM_CRSR_CWDR (0x20) +#define MCFSCM_RAMBAR_BA(x) ((x)&0xFFFF0000) +#define MCFSCM_RAMBAR_BDE (0x00000200) + +/* Reset Controller Module RCM */ + +#define MCFRESET_RCR (*(vu_char *) (CFG_MBAR+0x00110000)) +#define MCFRESET_RSR (*(vu_char *) (CFG_MBAR+0x00110001)) + +#define MCFRESET_RCR_SOFTRST (0x80) +#define MCFRESET_RCR_FRCRSTOUT (0x40) +#define MCFRESET_RCR_LVDF (0x10) +#define MCFRESET_RCR_LVDIE (0x08) +#define MCFRESET_RCR_LVDRE (0x04) +#define MCFRESET_RCR_LVDE (0x01) + +#define MCFRESET_RSR_LVD (0x40) +#define MCFRESET_RSR_SOFT (0x20) +#define MCFRESET_RSR_WDR (0x10) +#define MCFRESET_RSR_POR (0x08) +#define MCFRESET_RSR_EXT (0x04) +#define MCFRESET_RSR_LOC (0x02) +#define MCFRESET_RSR_LOL (0x01) +#define MCFRESET_RSR_ALL (0x7F) +#define MCFRESET_RCR_SOFTRST (0x80) +#define MCFRESET_RCR_FRCRSTOUT (0x40) + +/* Chip Configuration Module CCM */ + +#define MCFCCM_CCR (*(vu_short *)(CFG_MBAR+0x00110004)) +#define MCFCCM_RCON (*(vu_short *)(CFG_MBAR+0x00110008)) +#define MCFCCM_CIR (*(vu_short *)(CFG_MBAR+0x0011000A)) + + +/* Bit level definitions and macros */ +#define MCFCCM_CCR_LOAD (0x8000) +#define MCFCCM_CCR_MODE(x) (((x)&0x0007)<<8) +#define MCFCCM_CCR_SZEN (0x0040) +#define MCFCCM_CCR_PSTEN (0x0020) +#define MCFCCM_CCR_BME (0x0008) +#define MCFCCM_CCR_BMT(x) (((x)&0x0007)) + +#define MCFCCM_CIR_PIN_MASK (0xFF00) +#define MCFCCM_CIR_PRN_MASK (0x00FF) + +/* Clock Module */ + +#define MCFCLOCK_SYNCR (*(vu_short *)(CFG_MBAR+0x120000)) +#define MCFCLOCK_SYNSR (*(vu_char *) (CFG_MBAR+0x120002)) + +#define MCFCLOCK_SYNCR_MFD(x) (((x)&0x0007)<<12) +#define MCFCLOCK_SYNCR_RFD(x) (((x)&0x0007)<<8) +#define MCFCLOCK_SYNSR_LOCK 0x08 + +#define MCFSDRAMC_DCR (*(vu_short *)(CFG_MBAR+0x00000040)) +#define MCFSDRAMC_DACR0 (*(vu_long *) (CFG_MBAR+0x00000048)) +#define MCFSDRAMC_DMR0 (*(vu_long *) (CFG_MBAR+0x0000004c)) +#define MCFSDRAMC_DACR1 (*(vu_long *) (CFG_MBAR+0x00000050)) +#define MCFSDRAMC_DMR1 (*(vu_long *) (CFG_MBAR+0x00000054)) + +#define MCFSDRAMC_DCR_NAM (0x2000) +#define MCFSDRAMC_DCR_COC (0x1000) +#define MCFSDRAMC_DCR_IS (0x0800) +#define MCFSDRAMC_DCR_RTIM_3 (0x0000) +#define MCFSDRAMC_DCR_RTIM_6 (0x0200) +#define MCFSDRAMC_DCR_RTIM_9 (0x0400) +#define MCFSDRAMC_DCR_RC(x) ((x)&0x01FF) + +#define MCFSDRAMC_DACR_BASE(x) ((x)&0xFFFC0000) +#define MCFSDRAMC_DACR_RE (0x00008000) +#define MCFSDRAMC_DACR_CASL(x) (((x)&0x03)<<12) +#define MCFSDRAMC_DACR_CBM(x) (((x)&0x07)<<8) +#define MCFSDRAMC_DACR_PS_32 (0x00000000) +#define MCFSDRAMC_DACR_PS_16 (0x00000020) +#define MCFSDRAMC_DACR_PS_8 (0x00000010) +#define MCFSDRAMC_DACR_IP (0x00000008) +#define MCFSDRAMC_DACR_IMRS (0x00000040) + +#define MCFSDRAMC_DMR_BAM_16M (0x00FC0000) +#define MCFSDRAMC_DMR_WP (0x00000100) +#define MCFSDRAMC_DMR_CI (0x00000040) +#define MCFSDRAMC_DMR_AM (0x00000020) +#define MCFSDRAMC_DMR_SC (0x00000010) +#define MCFSDRAMC_DMR_SD (0x00000008) +#define MCFSDRAMC_DMR_UC (0x00000004) +#define MCFSDRAMC_DMR_UD (0x00000002) +#define MCFSDRAMC_DMR_V (0x00000001) + +#define MCFWTM_WCR (*(vu_short *)(CFG_MBAR+0x00140000)) +#define MCFWTM_WMR (*(vu_short *)(CFG_MBAR+0x00140002)) +#define MCFWTM_WCNTR (*(vu_short *)(CFG_MBAR+0x00140004)) +#define MCFWTM_WSR (*(vu_short *)(CFG_MBAR+0x00140006)) + +/* Chip SELECT Module CSM */ +#define MCFCSM_CSAR0 (*(vu_short *)(CFG_MBAR+0x00000080)) +#define MCFCSM_CSMR0 (*(vu_long *) (CFG_MBAR+0x00000084)) +#define MCFCSM_CSCR0 (*(vu_short *)(CFG_MBAR+0x0000008a)) +#define MCFCSM_CSAR1 (*(vu_short *)(CFG_MBAR+0x0000008C)) +#define MCFCSM_CSMR1 (*(vu_long *) (CFG_MBAR+0x00000090)) +#define MCFCSM_CSCR1 (*(vu_short *)(CFG_MBAR+0x00000096)) +#define MCFCSM_CSAR2 (*(vu_short *)(CFG_MBAR+0x00000098)) +#define MCFCSM_CSMR2 (*(vu_long *) (CFG_MBAR+0x0000009C)) +#define MCFCSM_CSCR2 (*(vu_short *)(CFG_MBAR+0x000000A2)) +#define MCFCSM_CSAR3 (*(vu_short *)(CFG_MBAR+0x000000A4)) +#define MCFCSM_CSMR3 (*(vu_long *) (CFG_MBAR+0x000000A8)) +#define MCFCSM_CSCR3 (*(vu_short *)(CFG_MBAR+0x000000AE)) + +#define MCFCSM_CSMR_BAM(x) ((x) & 0xFFFF0000) +#define MCFCSM_CSMR_WP (1<<8) +#define MCFCSM_CSMR_V (0x01) +#define MCFCSM_CSCR_WS(x) ((x & 0x0F)<<10) +#define MCFCSM_CSCR_AA (0x0100) +#define MCFCSM_CSCR_PS_32 (0x0000) +#define MCFCSM_CSCR_PS_8 (0x0040) +#define MCFCSM_CSCR_PS_16 (0x0080) + +/********************************************************************* +* +* General Purpose Timer (GPT) Module +* +*********************************************************************/ + +#define MCFGPTA_GPTIOS (*(vu_char *)(CFG_MBAR+0x1A0000)) +#define MCFGPTA_GPTCFORC (*(vu_char *)(CFG_MBAR+0x1A0001)) +#define MCFGPTA_GPTOC3M (*(vu_char *)(CFG_MBAR+0x1A0002)) +#define MCFGPTA_GPTOC3D (*(vu_char *)(CFG_MBAR+0x1A0003)) +#define MCFGPTA_GPTCNT (*(vu_short *)(CFG_MBAR+0x1A0004)) +#define MCFGPTA_GPTSCR1 (*(vu_char *)(CFG_MBAR+0x1A0006)) +#define MCFGPTA_GPTTOV (*(vu_char *)(CFG_MBAR+0x1A0008)) +#define MCFGPTA_GPTCTL1 (*(vu_char *)(CFG_MBAR+0x1A0009)) +#define MCFGPTA_GPTCTL2 (*(vu_char *)(CFG_MBAR+0x1A000B)) +#define MCFGPTA_GPTIE (*(vu_char *)(CFG_MBAR+0x1A000C)) +#define MCFGPTA_GPTSCR2 (*(vu_char *)(CFG_MBAR+0x1A000D)) +#define MCFGPTA_GPTFLG1 (*(vu_char *)(CFG_MBAR+0x1A000E)) +#define MCFGPTA_GPTFLG2 (*(vu_char *)(CFG_MBAR+0x1A000F)) +#define MCFGPTA_GPTC0 (*(vu_short *)(CFG_MBAR+0x1A0010)) +#define MCFGPTA_GPTC1 (*(vu_short *)(CFG_MBAR+0x1A0012)) +#define MCFGPTA_GPTC2 (*(vu_short *)(CFG_MBAR+0x1A0014)) +#define MCFGPTA_GPTC3 (*(vu_short *)(CFG_MBAR+0x1A0016)) +#define MCFGPTA_GPTPACTL (*(vu_char *)(CFG_MBAR+0x1A0018)) +#define MCFGPTA_GPTPAFLG (*(vu_char *)(CFG_MBAR+0x1A0019)) +#define MCFGPTA_GPTPACNT (*(vu_short *)(CFG_MBAR+0x1A001A)) +#define MCFGPTA_GPTPORT (*(vu_char *)(CFG_MBAR+0x1A001D)) +#define MCFGPTA_GPTDDR (*(vu_char *)(CFG_MBAR+0x1A001E)) + + +#define MCFGPTB_GPTIOS (*(vu_char *)(CFG_MBAR+0x1B0000)) +#define MCFGPTB_GPTCFORC (*(vu_char *)(CFG_MBAR+0x1B0001)) +#define MCFGPTB_GPTOC3M (*(vu_char *)(CFG_MBAR+0x1B0002)) +#define MCFGPTB_GPTOC3D (*(vu_char *)(CFG_MBAR+0x1B0003)) +#define MCFGPTB_GPTCNT (*(vu_short *)(CFG_MBAR+0x1B0004)) +#define MCFGPTB_GPTSCR1 (*(vu_char *)(CFG_MBAR+0x1B0006)) +#define MCFGPTB_GPTTOV (*(vu_char *)(CFG_MBAR+0x1B0008)) +#define MCFGPTB_GPTCTL1 (*(vu_char *)(CFG_MBAR+0x1B0009)) +#define MCFGPTB_GPTCTL2 (*(vu_char *)(CFG_MBAR+0x1B000B)) +#define MCFGPTB_GPTIE (*(vu_char *)(CFG_MBAR+0x1B000C)) +#define MCFGPTB_GPTSCR2 (*(vu_char *)(CFG_MBAR+0x1B000D)) +#define MCFGPTB_GPTFLG1 (*(vu_char *)(CFG_MBAR+0x1B000E)) +#define MCFGPTB_GPTFLG2 (*(vu_char *)(CFG_MBAR+0x1B000F)) +#define MCFGPTB_GPTC0 (*(vu_short *)(CFG_MBAR+0x1B0010)) +#define MCFGPTB_GPTC1 (*(vu_short *)(CFG_MBAR+0x1B0012)) +#define MCFGPTB_GPTC2 (*(vu_short *)(CFG_MBAR+0x1B0014)) +#define MCFGPTB_GPTC3 (*(vu_short *)(CFG_MBAR+0x1B0016)) +#define MCFGPTB_GPTPACTL (*(vu_char *)(CFG_MBAR+0x1B0018)) +#define MCFGPTB_GPTPAFLG (*(vu_char *)(CFG_MBAR+0x1B0019)) +#define MCFGPTB_GPTPACNT (*(vu_short *)(CFG_MBAR+0x1B001A)) +#define MCFGPTB_GPTPORT (*(vu_char *)(CFG_MBAR+0x1B001D)) +#define MCFGPTB_GPTDDR (*(vu_char *)(CFG_MBAR+0x1B001E)) + +/* Bit level definitions and macros */ +#define MCFGPT_GPTIOS_IOS3 (0x08) +#define MCFGPT_GPTIOS_IOS2 (0x04) +#define MCFGPT_GPTIOS_IOS1 (0x02) +#define MCFGPT_GPTIOS_IOS0 (0x01) + +#define MCFGPT_GPTCFORC_FOC3 (0x08) +#define MCFGPT_GPTCFORC_FOC2 (0x04) +#define MCFGPT_GPTCFORC_FOC1 (0x02) +#define MCFGPT_GPTCFORC_FOC0 (0x01) + +#define MCFGPT_GPTOC3M_OC3M3 (0x08) +#define MCFGPT_GPTOC3M_OC3M2 (0x04) +#define MCFGPT_GPTOC3M_OC3M1 (0x02) +#define MCFGPT_GPTOC3M_OC3M0 (0x01) + +#define MCFGPT_GPTOC3M_OC3D(x) (((x)&0x04)) + +#define MCFGPT_GPTSCR1_GPTEN (0x80) +#define MCFGPT_GPTSCR1_TFFCA (0x10) + +#define MCFGPT_GPTTOV3 (0x08) +#define MCFGPT_GPTTOV2 (0x04) +#define MCFGPT_GPTTOV1 (0x02) +#define MCFGPT_GPTTOV0 (0x01) + +#define MCFGPT_GPTCTL_OMOL3(x) (((x)&0x03)<<6) +#define MCFGPT_GPTCTL_OMOL2(x) (((x)&0x03)<<4) +#define MCFGPT_GPTCTL_OMOL1(x) (((x)&0x03)<<2) +#define MCFGPT_GPTCTL_OMOL0(x) (((x)&0x03)) + +#define MCFGPT_GPTCTL2_EDG3(x) (((x)&0x03)<<6) +#define MCFGPT_GPTCTL2_EDG2(x) (((x)&0x03)<<4) +#define MCFGPT_GPTCTL2_EDG1(x) (((x)&0x03)<<2) +#define MCFGPT_GPTCTL2_EDG0(x) (((x)&0x03)) + +#define MCFGPT_GPTIE_C3I (0x08) +#define MCFGPT_GPTIE_C2I (0x04) +#define MCFGPT_GPTIE_C1I (0x02) +#define MCFGPT_GPTIE_C0I (0x01) + +#define MCFGPT_GPTSCR2_TOI (0x80) +#define MCFGPT_GPTSCR2_PUPT (0x20) +#define MCFGPT_GPTSCR2_RDPT (0x10) +#define MCFGPT_GPTSCR2_TCRE (0x08) +#define MCFGPT_GPTSCR2_PR(x) (((x)&0x07)) + +#define MCFGPT_GPTFLG1_C3F (0x08) +#define MCFGPT_GPTFLG1_C2F (0x04) +#define MCFGPT_GPTFLG1_C1F (0x02) +#define MCFGPT_GPTFLG1_C0F (0x01) + +#define MCFGPT_GPTFLG2_TOF (0x80) +#define MCFGPT_GPTFLG2_C3F (0x08) +#define MCFGPT_GPTFLG2_C2F (0x04) +#define MCFGPT_GPTFLG2_C1F (0x02) +#define MCFGPT_GPTFLG2_C0F (0x01) + +#define MCFGPT_GPTPACTL_PAE (0x40) +#define MCFGPT_GPTPACTL_PAMOD (0x20) +#define MCFGPT_GPTPACTL_PEDGE (0x10) +#define MCFGPT_GPTPACTL_CLK_PACLK (0x04) +#define MCFGPT_GPTPACTL_CLK_PACLK256 (0x08) +#define MCFGPT_GPTPACTL_CLK_PACLK65536 (0x0C) +#define MCFGPT_GPTPACTL_CLK(x) (((x)&0x03)<<2) +#define MCFGPT_GPTPACTL_PAOVI (0x02) +#define MCFGPT_GPTPACTL_PAI (0x01) + +#define MCFGPT_GPTPAFLG_PAOVF (0x02) +#define MCFGPT_GPTPAFLG_PAIF (0x01) + +#define MCFGPT_GPTPORT_PORTT3 (0x08) +#define MCFGPT_GPTPORT_PORTT2 (0x04) +#define MCFGPT_GPTPORT_PORTT1 (0x02) +#define MCFGPT_GPTPORT_PORTT0 (0x01) + +#define MCFGPT_GPTDDR_DDRT3 (0x08) +#define MCFGPT_GPTDDR_DDRT2 (0x04) +#define MCFGPT_GPTDDR_DDRT1 (0x02) +#define MCFGPT_GPTDDR_DDRT0 (0x01) + +/* Coldfire Flash Module CFM */ + +#define MCFCFM_MCR (*(vu_short *)(CFG_MBAR+0x1D0000)) +#define MCFCFM_MCR_LOCK (0x0400) +#define MCFCFM_MCR_PVIE (0x0200) +#define MCFCFM_MCR_AEIE (0x0100) +#define MCFCFM_MCR_CBEIE (0x0080) +#define MCFCFM_MCR_CCIE (0x0040) +#define MCFCFM_MCR_KEYACC (0x0020) + +#define MCFCFM_CLKD (*(vu_char *)(CFG_MBAR+0x1D0002)) + +#define MCFCFM_SEC (*(vu_long*) (CFG_MBAR+0x1D0008)) +#define MCFCFM_SEC_KEYEN (0x80000000) +#define MCFCFM_SEC_SECSTAT (0x40000000) + +#define MCFCFM_PROT (*(vu_long*) (CFG_MBAR+0x1D0010)) +#define MCFCFM_SACC (*(vu_long*) (CFG_MBAR+0x1D0014)) +#define MCFCFM_DACC (*(vu_long*) (CFG_MBAR+0x1D0018)) +#define MCFCFM_USTAT (*(vu_char*) (CFG_MBAR+0x1D0020)) +#define MCFCFM_USTAT_CBEIF 0x80 +#define MCFCFM_USTAT_CCIF 0x40 +#define MCFCFM_USTAT_PVIOL 0x20 +#define MCFCFM_USTAT_ACCERR 0x10 +#define MCFCFM_USTAT_BLANK 0x04 +#define MCFCFM_CMD (*(vu_char*) (CFG_MBAR+0x1D0024)) +#define MCFCFM_CMD_ERSVER 0x05 +#define MCFCFM_CMD_PGERSVER 0x06 +#define MCFCFM_CMD_PGM 0x20 +#define MCFCFM_CMD_PGERS 0x40 +#define MCFCFM_CMD_MASERS 0x41 /****************************************************************************/ #endif /* m5282_h */ diff --git a/include/asm-m68k/mcftimer.h b/include/asm-m68k/mcftimer.h index 047950b5a51..a73b80eaf81 100644 --- a/include/asm-m68k/mcftimer.h +++ b/include/asm-m68k/mcftimer.h @@ -45,7 +45,7 @@ #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) #define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ #define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ -#elif defined(CONFIG_M5282) +#elif defined(CONFIG_M5282) | defined(CONFIG_M5271) #define MCFTIMER_BASE1 0x150000 /* Base address of TIMER1 */ #define MCFTIMER_BASE2 0x160000 /* Base address of TIMER2 */ #define MCFTIMER_BASE3 0x170000 /* Base address of TIMER4 */ diff --git a/include/asm-m68k/mcfuart.h b/include/asm-m68k/mcfuart.h index e5082a917b0..7c0999d61d8 100644 --- a/include/asm-m68k/mcfuart.h +++ b/include/asm-m68k/mcfuart.h @@ -46,7 +46,7 @@ #define MCFUART_BASE1 0x140 /* Base address of UART1 */ #define MCFUART_BASE2 0x180 /* Base address of UART2 */ #endif -#elif defined(CONFIG_M5282) +#elif defined(CONFIG_M5282) || defined(CONFIG_M5271) #define MCFUART_BASE1 0x200 /* Base address of UART1 */ #define MCFUART_BASE2 0x240 /* Base address of UART2 */ #define MCFUART_BASE3 0x280 /* Base address of UART3 */ diff --git a/include/asm-m68k/ptrace.h b/include/asm-m68k/ptrace.h index a6d3d74545e..75b241883f3 100644 --- a/include/asm-m68k/ptrace.h +++ b/include/asm-m68k/ptrace.h @@ -43,7 +43,7 @@ struct pt_regs { ulong a4; ulong a5; ulong a6; -#if defined(CONFIG_M5272) || defined(CONFIG_M5282) || defined(CONFIG_M5249) +#if defined(CONFIG_M5272) || defined(CONFIG_M5282) || defined(CONFIG_M5249) || defined(CONFIG_M5271) unsigned format : 4; /* frame format specifier */ unsigned vector : 12; /* vector offset */ unsigned short sr; diff --git a/include/asm-mips/au1x00.h b/include/asm-mips/au1x00.h index 4e19dc4da28..a4e9947d93b 100644 --- a/include/asm-mips/au1x00.h +++ b/include/asm-mips/au1x00.h @@ -119,6 +119,11 @@ static __inline__ int au_ffs(int x) return __ilog2(x & -x) + 1; } +#define gpio_set(Value) outl(Value, SYS_OUTPUTSET) +#define gpio_clear(Value) outl(Value, SYS_OUTPUTCLR) +#define gpio_read() inl(SYS_PINSTATERD) +#define gpio_tristate(Value) outl(Value, SYS_TRIOUTCLR) + #endif /* !ASSEMBLY */ #ifdef CONFIG_PM diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h index b16a98865ad..0fab53bf0e9 100644 --- a/include/asm-nios2/io.h +++ b/include/asm-nios2/io.h @@ -39,12 +39,13 @@ extern unsigned inl (unsigned port); #define readl(addr)\ ({unsigned long val;\ asm volatile( "ldwio %0, 0(%1)" :"=r"(val) : "r" (addr)); val;}) + #define writeb(addr,val)\ - asm volatile ("stbio %0, 0(%1)" : : "r" (addr), "r" (val)) + asm volatile ("stbio %1, 0(%0)" : : "r" (addr), "r" (val)) #define writew(addr,val)\ - asm volatile ("sthio %0, 0(%1)" : : "r" (addr), "r" (val)) + asm volatile ("sthio %1, 0(%0)" : : "r" (addr), "r" (val)) #define writel(addr,val)\ - asm volatile ("stwio %0, 0(%1)" : : "r" (addr), "r" (val)) + asm volatile ("stwio %1, 0(%0)" : : "r" (addr), "r" (val)) #define inb(addr) readb(addr) #define inw(addr) readw(addr) diff --git a/include/asm-ppc/i2c.h b/include/asm-ppc/i2c.h index fa9d164e9aa..1680d3a7c15 100644 --- a/include/asm-ppc/i2c.h +++ b/include/asm-ppc/i2c.h @@ -87,7 +87,7 @@ typedef struct i2c #error CFG_I2C_OFFSET is not defined in /include/configs/${BOARD}.h #endif -#if defined(CONFIG_MPC8349ADS) || defined(CONFIG_TQM834X) +#if defined(CONFIG_MPC8349EMDS) || defined(CONFIG_TQM834X) /* * MPC8349 have two i2c bus */ diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 6c2c712a268..c2b4c5c6ab4 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -71,8 +71,8 @@ typedef struct sysconf8349 { | SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP) u32 sicrl; /* System General Purpose Register Low */ #define SICRL_LDP_A 0x80000000 -#define SICRL_USB0 0x40000000 -#define SICRL_USB1 0x20000000 +#define SICRL_USB1 0x40000000 +#define SICRL_USB0 0x20000000 #define SICRL_UART 0x0C000000 #define SICRL_GPIO1_A 0x02000000 #define SICRL_GPIO1_B 0x01000000 @@ -675,24 +675,76 @@ typedef struct ddr8349{ u8 res9[8]; u32 sdram_clk_cntl; #define DDR_SDRAM_CLK_CNTL_SS_EN 0x80000000 +#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_025 0x01000000 #define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 0x02000000 +#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075 0x03000000 +#define DDR_SDRAM_CLK_CNTL_CLK_ADJUST_1 0x04000000 u8 res4[0xCCC]; u32 data_err_inject_hi; /**< Memory Data Path Error Injection Mask High */ u32 data_err_inject_lo; /**< Memory Data Path Error Injection Mask Low */ u32 ecc_err_inject; /**< Memory Data Path Error Injection Mask ECC */ +#define ECC_ERR_INJECT_EMB (0x80000000>>22) /* ECC Mirror Byte */ +#define ECC_ERR_INJECT_EIEN (0x80000000>>23) /* Error Injection Enable */ +#define ECC_ERR_INJECT_EEIM (0xff000000>>24) /* ECC Erroe Injection Enable */ +#define ECC_ERR_INJECT_EEIM_SHIFT 0 u8 res5[0x14]; u32 capture_data_hi; /**< Memory Data Path Read Capture High */ u32 capture_data_lo; /**< Memory Data Path Read Capture Low */ u32 capture_ecc; /**< Memory Data Path Read Capture ECC */ +#define CAPTURE_ECC_ECE (0xff000000>>24) +#define CAPTURE_ECC_ECE_SHIFT 0 u8 res6[0x14]; u32 err_detect; /**< Memory Error Detect */ +#define ECC_ERROR_DETECT_MME (0x80000000>>0) /* Multiple Memory Errors */ +#define ECC_ERROR_DETECT_MBE (0x80000000>>28) /* Multiple-Bit Error */ +#define ECC_ERROR_DETECT_SBE (0x80000000>>29) /* Single-Bit ECC Error Pickup */ +#define ECC_ERROR_DETECT_MSE (0x80000000>>31) /* Memory Select Error */ u32 err_disable; /**< Memory Error Disable */ +#define ECC_ERROR_DISABLE_MBED (0x80000000>>28) /* Multiple-Bit ECC Error Disable */ +#define ECC_ERROR_DISABLE_SBED (0x80000000>>29) /* Sinle-Bit ECC Error disable */ +#define ECC_ERROR_DISABLE_MSED (0x80000000>>31) /* Memory Select Error Disable */ +#define ECC_ERROR_ENABLE ~(ECC_ERROR_DISABLE_MSED|ECC_ERROR_DISABLE_SBED|ECC_ERROR_DISABLE_MBED) u32 err_int_en; /**< Memory Error Interrupt Enable */ +#define ECC_ERR_INT_EN_MBEE (0x80000000>>28) /* Multiple-Bit ECC Error Interrupt Enable */ +#define ECC_ERR_INT_EN_SBEE (0x80000000>>29) /* Single-Bit ECC Error Interrupt Enable */ +#define ECC_ERR_INT_EN_MSEE (0x80000000>>31) /* Memory Select Error Interrupt Enable */ +#define ECC_ERR_INT_DISABLE ~(ECC_ERR_INT_EN_MBEE|ECC_ERR_INT_EN_SBEE|ECC_ERR_INT_EN_MSEE) u32 capture_attributes; /**< Memory Error Attributes Capture */ +#define ECC_CAPT_ATTR_BNUM (0xe0000000>>1) /* Data Beat Num */ +#define ECC_CAPT_ATTR_BNUM_SHIFT 28 +#define ECC_CAPT_ATTR_TSIZ (0xc0000000>>6) /* Transaction Size */ +#define ECC_CAPT_ATTR_TSIZ_FOUR_DW 0 +#define ECC_CAPT_ATTR_TSIZ_ONE_DW 1 +#define ECC_CAPT_ATTR_TSIZ_TWO_DW 2 +#define ECC_CAPT_ATTR_TSIZ_THREE_DW 3 +#define ECC_CAPT_ATTR_TSIZ_SHIFT 24 +#define ECC_CAPT_ATTR_TSRC (0xf8000000>>11) /* Transaction Source */ +#define ECC_CAPT_ATTR_TSRC_E300_CORE_DT 0x0 +#define ECC_CAPT_ATTR_TSRC_E300_CORE_IF 0x2 +#define ECC_CAPT_ATTR_TSRC_TSEC1 0x4 +#define ECC_CAPT_ATTR_TSRC_TSEC2 0x5 +#define ECC_CAPT_ATTR_TSRC_USB (0x06|0x07) +#define ECC_CAPT_ATTR_TSRC_ENCRYPT 0x8 +#define ECC_CAPT_ATTR_TSRC_I2C 0x9 +#define ECC_CAPT_ATTR_TSRC_JTAG 0xA +#define ECC_CAPT_ATTR_TSRC_PCI1 0xD +#define ECC_CAPT_ATTR_TSRC_PCI2 0xE +#define ECC_CAPT_ATTR_TSRC_DMA 0xF +#define ECC_CAPT_ATTR_TSRC_SHIFT 16 +#define ECC_CAPT_ATTR_TTYP (0xe0000000>>18) /* Transaction Type */ +#define ECC_CAPT_ATTR_TTYP_WRITE 0x1 +#define ECC_CAPT_ATTR_TTYP_READ 0x2 +#define ECC_CAPT_ATTR_TTYP_R_M_W 0x3 +#define ECC_CAPT_ATTR_TTYP_SHIFT 12 +#define ECC_CAPT_ATTR_VLD (0x80000000>>31) /* Valid */ u32 capture_address; /**< Memory Error Address Capture */ u32 capture_ext_address;/**< Memory Error Extended Address Capture */ u32 err_sbe; /**< Memory Single-Bit ECC Error Management */ +#define ECC_ERROR_MAN_SBET (0xff000000>>8) /* Single-Bit Error Threshold 0..255*/ +#define ECC_ERROR_MAN_SBET_SHIFT 16 +#define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255*/ +#define ECC_ERROR_MAN_SBEC_SHIFT 0 u8 res7[0xA4]; u32 debug_reg; u8 res8[0xFC]; @@ -795,10 +847,95 @@ typedef struct spi8349 u8 res1[0xD8]; } spi8349_t; + +/* + * DMA/Messaging Unit + */ typedef struct dma8349 { - u8 fixme[0x300]; + u32 res0[0xC]; /* 0x0-0x29 reseverd */ + u32 omisr; /* 0x30 Outbound message interrupt status register */ + u32 omimr; /* 0x34 Outbound message interrupt mask register */ + u32 res1[0x6]; /* 0x38-0x49 reserved */ + + u32 imr0; /* 0x50 Inbound message register 0 */ + u32 imr1; /* 0x54 Inbound message register 1 */ + u32 omr0; /* 0x58 Outbound message register 0 */ + u32 omr1; /* 0x5C Outbound message register 1 */ + + u32 odr; /* 0x60 Outbound doorbell register */ + u32 res2; /* 0x64-0x67 reserved */ + u32 idr; /* 0x68 Inbound doorbell register */ + u32 res3[0x5]; /* 0x6C-0x79 reserved */ + + u32 imisr; /* 0x80 Inbound message interrupt status register */ + u32 imimr; /* 0x84 Inbound message interrupt mask register */ + u32 res4[0x1E]; /* 0x88-0x99 reserved */ + + u32 dmamr0; /* 0x100 DMA 0 mode register */ + u32 dmasr0; /* 0x104 DMA 0 status register */ + u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */ + u32 res5; /* 0x10C reserved */ + u32 dmasar0; /* 0x110 DMA 0 source address register */ + u32 res6; /* 0x114 reserved */ + u32 dmadar0; /* 0x118 DMA 0 destination address register */ + u32 res7; /* 0x11C reserved */ + u32 dmabcr0; /* 0x120 DMA 0 byte count register */ + u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */ + u32 res8[0x16]; /* 0x128-0x179 reserved */ + + u32 dmamr1; /* 0x180 DMA 1 mode register */ + u32 dmasr1; /* 0x184 DMA 1 status register */ + u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */ + u32 res9; /* 0x18C reserved */ + u32 dmasar1; /* 0x190 DMA 1 source address register */ + u32 res10; /* 0x194 reserved */ + u32 dmadar1; /* 0x198 DMA 1 destination address register */ + u32 res11; /* 0x19C reserved */ + u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */ + u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */ + u32 res12[0x16];/* 0x1A8-0x199 reserved */ + + u32 dmamr2; /* 0x200 DMA 2 mode register */ + u32 dmasr2; /* 0x204 DMA 2 status register */ + u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */ + u32 res13; /* 0x20C reserved */ + u32 dmasar2; /* 0x210 DMA 2 source address register */ + u32 res14; /* 0x214 reserved */ + u32 dmadar2; /* 0x218 DMA 2 destination address register */ + u32 res15; /* 0x21C reserved */ + u32 dmabcr2; /* 0x220 DMA 2 byte count register */ + u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */ + u32 res16[0x16];/* 0x228-0x279 reserved */ + + u32 dmamr3; /* 0x280 DMA 3 mode register */ + u32 dmasr3; /* 0x284 DMA 3 status register */ + u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */ + u32 res17; /* 0x28C reserved */ + u32 dmasar3; /* 0x290 DMA 3 source address register */ + u32 res18; /* 0x294 reserved */ + u32 dmadar3; /* 0x298 DMA 3 destination address register */ + u32 res19; /* 0x29C reserved */ + u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */ + u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */ + + u32 dmagsr; /* 0x2A8 DMA general status register */ + u32 res20[0x15];/* 0x2AC-0x2FF reserved */ } dma8349_t; +/* DMAMRn bits */ +#define DMA_CHANNEL_START (0x00000001) /* Bit - DMAMRn CS */ +#define DMA_CHANNEL_TRANSFER_MODE_DIRECT (0x00000004) /* Bit - DMAMRn CTM */ +#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN (0x00001000) /* Bit - DMAMRn SAHE */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B (0x00000000) /* 2Bit- DMAMRn SAHTS 1byte */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B (0x00004000) /* 2Bit- DMAMRn SAHTS 2bytes */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B (0x00008000) /* 2Bit- DMAMRn SAHTS 4bytes */ +#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B (0x0000c000) /* 2Bit- DMAMRn SAHTS 8bytes */ +#define DMA_CHANNEL_SNOOP (0x00010000) /* Bit - DMAMRn DMSEN */ + +/* DMASRn bits */ +#define DMA_CHANNEL_BUSY (0x00000004) /* Bit - DMASRn CB */ +#define DMA_CHANNEL_TRANSFER_ERROR (0x00000080) /* Bit - DMASRn TE */ + /* * PCI Software Configuration Registers */ diff --git a/include/asm-ppc/iopin_85xx.h b/include/asm-ppc/iopin_85xx.h new file mode 100644 index 00000000000..f854df633aa --- /dev/null +++ b/include/asm-ppc/iopin_85xx.h @@ -0,0 +1,146 @@ +/* + * MPC85xx I/O port pin manipulation functions + */ + +#ifndef _ASM_IOPIN_85xx_H_ +#define _ASM_IOPIN_85xx_H_ + +#include <linux/types.h> +#include <asm/immap_85xx.h> + +#ifdef __KERNEL__ + +typedef struct { + u_char port:2; /* port number (A=0, B=1, C=2, D=3) */ + u_char pin:5; /* port pin (0-31) */ + u_char flag:1; /* for whatever */ +} iopin_t; + +#define IOPIN_PORTA 0 +#define IOPIN_PORTB 1 +#define IOPIN_PORTC 2 +#define IOPIN_PORTD 3 + +extern __inline__ void iopin_set_high (iopin_t * iopin) +{ + volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata; + datp[iopin->port * 8] |= (1 << (31 - iopin->pin)); +} + +extern __inline__ void iopin_set_low (iopin_t * iopin) +{ + volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata; + datp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); +} + +extern __inline__ uint iopin_is_high (iopin_t * iopin) +{ + volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata; + return (datp[iopin->port * 8] >> (31 - iopin->pin)) & 1; +} + +extern __inline__ uint iopin_is_low (iopin_t * iopin) +{ + volatile uint *datp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdata; + return ((datp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; +} + +extern __inline__ void iopin_set_out (iopin_t * iopin) +{ + volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira; + dirp[iopin->port * 8] |= (1 << (31 - iopin->pin)); +} + +extern __inline__ void iopin_set_in (iopin_t * iopin) +{ + volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira; + dirp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); +} + +extern __inline__ uint iopin_is_out (iopin_t * iopin) +{ + volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira; + return (dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1; +} + +extern __inline__ uint iopin_is_in (iopin_t * iopin) +{ + volatile uint *dirp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.pdira; + return ((dirp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; +} + +extern __inline__ void iopin_set_odr (iopin_t * iopin) +{ + volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra; + odrp[iopin->port * 8] |= (1 << (31 - iopin->pin)); +} + +extern __inline__ void iopin_set_act (iopin_t * iopin) +{ + volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra; + odrp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); +} + +extern __inline__ uint iopin_is_odr (iopin_t * iopin) +{ + volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra; + return (odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1; +} + +extern __inline__ uint iopin_is_act (iopin_t * iopin) +{ + volatile uint *odrp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.podra; + return ((odrp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; +} + +extern __inline__ void iopin_set_ded (iopin_t * iopin) +{ + volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara; + parp[iopin->port * 8] |= (1 << (31 - iopin->pin)); +} + +extern __inline__ void iopin_set_gen (iopin_t * iopin) +{ + volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara; + parp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); +} + +extern __inline__ uint iopin_is_ded (iopin_t * iopin) +{ + volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara; + return (parp[iopin->port * 8] >> (31 - iopin->pin)) & 1; +} + +extern __inline__ uint iopin_is_gen (iopin_t * iopin) +{ + volatile uint *parp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.ppara; + return ((parp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; +} + +extern __inline__ void iopin_set_opt2 (iopin_t * iopin) +{ + volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora; + sorp[iopin->port * 8] |= (1 << (31 - iopin->pin)); +} + +extern __inline__ void iopin_set_opt1 (iopin_t * iopin) +{ + volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora; + sorp[iopin->port * 8] &= ~(1 << (31 - iopin->pin)); +} + +extern __inline__ uint iopin_is_opt2 (iopin_t * iopin) +{ + volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora; + return (sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1; +} + +extern __inline__ uint iopin_is_opt1 (iopin_t * iopin) +{ + volatile uint *sorp = &((immap_t *) CFG_IMMR)->im_cpm.im_cpm_iop.psora; + return ((sorp[iopin->port * 8] >> (31 - iopin->pin)) & 1) ^ 1; +} + +#endif /* __KERNEL__ */ + +#endif /* _ASM_IOPIN_85xx_H_ */ diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h index 2606b79a249..baaf6f79766 100644 --- a/include/asm-ppc/mmu.h +++ b/include/asm-ppc/mmu.h @@ -470,4 +470,45 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower); #define LAWAR_SIZE_1G (LAWAR_SIZE_BASE+19) #define LAWAR_SIZE_2G (LAWAR_SIZE_BASE+20) +#ifdef CONFIG_440SPE +/*----------------------------------------------------------------------------+ +| Following instructions are not available in Book E mode of the GNU assembler. ++----------------------------------------------------------------------------*/ +#define DCCCI(ra,rb) .long 0x7c000000|\ + (ra<<16)|(rb<<11)|(454<<1) + +#define ICCCI(ra,rb) .long 0x7c000000|\ + (ra<<16)|(rb<<11)|(966<<1) + +#define DCREAD(rt,ra,rb) .long 0x7c000000|\ + (rt<<21)|(ra<<16)|(rb<<11)|(486<<1) + +#define ICREAD(ra,rb) .long 0x7c000000|\ + (ra<<16)|(rb<<11)|(998<<1) + +#define TLBSX(rt,ra,rb) .long 0x7c000000|\ + (rt<<21)|(ra<<16)|(rb<<11)|(914<<1) + +#define TLBWE(rs,ra,ws) .long 0x7c000000|\ + (rs<<21)|(ra<<16)|(ws<<11)|(978<<1) + +#define TLBRE(rt,ra,ws) .long 0x7c000000|\ + (rt<<21)|(ra<<16)|(ws<<11)|(946<<1) + +#define TLBSXDOT(rt,ra,rb) .long 0x7c000001|\ + (rt<<21)|(ra<<16)|(rb<<11)|(914<<1) + +#define MSYNC .long 0x7c000000|\ + (598<<1) + +#define MBAR_INST .long 0x7c000000|\ + (854<<1) + +/*----------------------------------------------------------------------------+ +| Following instruction is not available in PPC405 mode of the GNU assembler. ++----------------------------------------------------------------------------*/ +#define TLBRE(rt,ra,ws) .long 0x7c000000|\ + (rt<<21)|(ra<<16)|(ws<<11)|(946<<1) + +#endif #endif /* _PPC_MMU_H_ */ diff --git a/include/asm-ppc/mpc8349_pci.h b/include/asm-ppc/mpc8349_pci.h index 48255a34f94..7a1adba950d 100644 --- a/include/asm-ppc/mpc8349_pci.h +++ b/include/asm-ppc/mpc8349_pci.h @@ -77,6 +77,7 @@ #define POCMR_ENABLE 0x80000000 #define POCMR_PCI_IO 0x40000000 #define POCMR_PREFETCH_EN 0x20000000 +#define POCMR_PCI2 0x10000000 /* Soft PCI reset */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 811378383df..44b23f1eb4c 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -725,7 +725,9 @@ #define PVR_440GP_RC 0x40120481 #define PVR_440EP_RA 0x42221850 #define PVR_440EP_RB 0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */ +#define PVR_440EP_RC 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */ #define PVR_440GR_RA 0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */ +#define PVR_440GR_RB 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */ #define PVR_440GX_RA 0x51B21850 #define PVR_440GX_RB 0x51B21851 #define PVR_440GX_RC 0x51B21892 @@ -733,6 +735,8 @@ #define PVR_405EP_RB 0x51210950 #define PVR_440SP_RA 0x53221850 #define PVR_440SP_RB 0x53221891 +#define PVR_440SPe_RA 0x53421890 +#define PVR_440SPe_RB 0x53421891 #define PVR_601 0x00010000 #define PVR_602 0x00050000 #define PVR_603 0x00030000 diff --git a/include/bmp_logo.h b/include/bmp_logo.h deleted file mode 100644 index 9c924b8592d..00000000000 --- a/include/bmp_logo.h +++ /dev/null @@ -1,1948 +0,0 @@ -/* - * Automatically generated by "tools/bmp_logo" - * - * DO NOT EDIT - * - */ - - -#ifndef __BMP_LOGO_H__ -#define __BMP_LOGO_H__ - -#define BMP_LOGO_WIDTH 160 -#define BMP_LOGO_HEIGHT 96 -#define BMP_LOGO_COLORS 31 -#define BMP_LOGO_OFFSET 16 - -unsigned short bmp_logo_palette[] = { - 0x0343, 0x0454, 0x0565, 0x0565, 0x0676, 0x0787, 0x0898, 0x0999, - 0x0AAA, 0x0ABA, 0x0BCB, 0x0CCC, 0x0DDD, 0x0EEE, 0x0FFF, 0x0FB3, - 0x0FB4, 0x0FC4, 0x0FC5, 0x0FC6, 0x0FD7, 0x0FD8, 0x0FD9, 0x0FDA, - 0x0FEA, 0x0FEB, 0x0FEC, 0x0FFD, 0x0FFE, 0x0FFF, 0x0FFF, -}; - -unsigned char bmp_logo_bitmap[] = { - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, - 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1B, 0x11, 0x10, 0x10, 0x10, 0x10, - 0x14, 0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x1B, 0x14, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1B, 0x14, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x14, 0x1C, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x22, 0x2A, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x29, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x14, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x18, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x18, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x12, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x19, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x18, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2D, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x28, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x1C, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x19, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x12, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1B, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x18, - 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x18, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x16, 0x2E, 0x17, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x19, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2B, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2D, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x28, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x20, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x22, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x22, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x14, 0x17, 0x15, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x17, 0x1B, 0x2E, 0x1A, 0x14, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x17, 0x1B, 0x2E, 0x1B, - 0x14, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x1B, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2D, 0x29, - 0x23, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x23, 0x2A, - 0x2E, 0x2E, 0x2E, 0x2E, 0x14, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x14, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x1B, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x15, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x17, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x12, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x19, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2B, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x24, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x12, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x14, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x1B, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x1A, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1C, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x16, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x11, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x11, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1E, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x1A, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2B, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x28, 0x2E, 0x2A, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x29, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x19, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x1E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x11, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x21, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x12, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x1D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x14, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x1B, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2A, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x14, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x1B, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x1B, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x23, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x17, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x20, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x22, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x18, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x23, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x17, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x23, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2A, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x21, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2D, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x12, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x1D, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x18, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x1D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x22, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x20, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x16, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2D, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1D, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x1C, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x1C, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x11, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x1E, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x17, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x16, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x21, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x24, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x1D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x14, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x11, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x18, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x15, 0x2E, 0x2E, 0x2E, 0x19, - 0x12, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x11, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x1E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x1B, 0x2E, 0x2E, 0x1B, 0x16, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x19, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2D, 0x26, - 0x22, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x22, 0x27, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x13, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x19, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2D, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2D, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x12, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x1C, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2A, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x20, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x13, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x2C, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2D, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x11, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x1C, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1C, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x11, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x12, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x1E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x2A, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2B, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x13, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x1B, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1D, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x12, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x20, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1A, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x11, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x15, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2D, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x29, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x17, 0x14, 0x10, 0x11, 0x14, - 0x1A, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1B, 0x17, 0x17, 0x1A, 0x1B, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2B, 0x26, - 0x2A, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x26, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x17, 0x1B, 0x1B, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x16, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, - 0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x12, 0x10, 0x10, 0x14, 0x14, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, - 0x10, 0x10, 0x14, 0x14, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x12, 0x10, 0x1B, 0x2E, 0x2E, 0x2E, 0x2E, - 0x17, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x13, 0x14, 0x13, 0x10, 0x10, 0x1C, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x2E, - 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x18, 0x10, 0x10, 0x17, 0x14, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, - 0x16, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x11, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x19, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x10, - 0x1D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x12, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x10, 0x10, 0x19, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x15, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1B, 0x10, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x15, 0x10, 0x10, 0x10, - 0x1D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x1B, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x14, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x10, - 0x19, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x10, - 0x1B, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1E, - 0x10, 0x10, 0x10, 0x17, 0x17, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x1B, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x1E, 0x12, 0x10, - 0x2E, 0x2E, 0x2E, 0x18, 0x10, 0x2E, 0x17, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, - 0x1C, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x1B, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x15, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x17, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x14, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x1B, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x14, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x11, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x17, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x13, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x17, - 0x10, 0x10, 0x10, 0x18, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x1B, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x17, 0x10, 0x10, 0x10, 0x10, 0x10, 0x19, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x17, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x13, 0x10, 0x1A, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x1E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x19, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x19, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x1C, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x16, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x15, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x17, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x1E, 0x10, 0x12, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x12, - 0x11, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x1C, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1A, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x10, 0x1C, - 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x16, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x1A, 0x2E, - 0x2E, 0x1D, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x14, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1E, 0x10, 0x19, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1A, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x13, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x13, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x17, 0x10, 0x1C, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x14, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x11, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x14, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x18, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x1D, 0x10, 0x15, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x14, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x19, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x14, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x19, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x14, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, - 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1A, 0x10, - 0x14, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x1C, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x14, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x1A, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x1C, 0x10, 0x10, 0x10, 0x10, 0x10, 0x13, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x13, 0x10, 0x10, 0x10, 0x10, 0x10, 0x16, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x13, 0x10, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x11, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x1E, 0x10, 0x16, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x1A, 0x10, 0x19, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x11, 0x10, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x11, 0x14, - 0x10, 0x10, 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, - 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x10, - 0x10, 0x14, 0x13, 0x10, 0x10, 0x10, 0x2E, 0x2E, - -}; - -#endif /* __BMP_LOGO_H__ */ diff --git a/include/cmd_confdefs.h b/include/cmd_confdefs.h index 9ee4849611c..8532cc9aa06 100644 --- a/include/cmd_confdefs.h +++ b/include/cmd_confdefs.h @@ -94,6 +94,7 @@ #define CFG_CMD_EXT2 0x1000000000000000ULL /* EXT2 Support */ #define CFG_CMD_SNTP 0x2000000000000000ULL /* SNTP support */ #define CFG_CMD_DISPLAY 0x4000000000000000ULL /* Display support */ +#define CFG_CMD_ONENAND 0x8000000000000000ULL /* OneNAND support */ #define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFULL /* ALL commands */ @@ -112,7 +113,6 @@ CFG_CMD_DISPLAY | \ CFG_CMD_DOC | \ CFG_CMD_DTT | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ CFG_CMD_EXT2 | \ @@ -142,6 +142,7 @@ CFG_CMD_SPI | \ CFG_CMD_UNIVERSE | \ CFG_CMD_USB | \ + CFG_CMD_ONENAND | \ CFG_CMD_VFD ) /* Default configuration diff --git a/include/common.h b/include/common.h index d2570a803ea..e4637ad356a 100644 --- a/include/common.h +++ b/include/common.h @@ -116,12 +116,13 @@ typedef void (interrupt_handler_t)(void *); /* * enable common handling for all TQM8xxL/M boards: - * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards + * - CONFIG_TQM8xxM will be defined for all TQM8xxM and TQM885D boards * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards */ #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \ defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \ - defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) + defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) || \ + defined(CONFIG_TQM885D) # ifndef CONFIG_TQM8xxM # define CONFIG_TQM8xxM # endif @@ -365,7 +366,8 @@ void trap_init (ulong); defined (CONFIG_75x) || \ defined (CONFIG_74xx) || \ defined (CONFIG_MPC8220) || \ - defined(CONFIG_MPC85xx) + defined (CONFIG_MPC85xx) || \ + defined (CONFIG_MPC83XX) unsigned char in8(unsigned int); void out8(unsigned int, unsigned char); unsigned short in16(unsigned int); @@ -457,6 +459,10 @@ void get_sys_info ( sys_info_t * ); #if defined(CONFIG_4xx) || defined(CONFIG_IOP480) # if defined(CONFIG_440) typedef PPC440_SYS_INFO sys_info_t; +# if defined(CONFIG_440SPE) + unsigned long determine_sysper(void); + unsigned long determine_pci_clock_per(void); +# endif # else typedef PPC405_SYS_INFO sys_info_t; # endif diff --git a/include/commproc.h b/include/commproc.h index 790016655e2..12400e3eddb 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -2,7 +2,7 @@ * MPC8xx Communication Processor Module. * Copyright (c) 1997 Dan Malek (dmalek@jlc.net) * - * (C) Copyright 2000-2004 + * (C) Copyright 2000-2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * This file contains structures and information for the communication @@ -1405,14 +1405,16 @@ typedef struct scc_enet { #endif /* CONFIG_SXNI855T */ -/*** MVS1, TQM823L/M, TQM850L/M, ETX094, R360MPI *******************/ +/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, ETX094, R360MPI **********/ #if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \ defined(CONFIG_R360MPI) || defined(CONFIG_RBC823) || \ defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \ defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \ - defined(CONFIG_ETX094) || defined(CONFIG_RRVISION)|| \ + defined(CONFIG_TQM885D) || defined(CONFIG_ETX094) || \ + defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)|| \ (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2) + /* Bits in parallel I/O port registers that have to be set/cleared * to configure the pins for SCC2 use. */ @@ -1437,6 +1439,11 @@ typedef struct scc_enet { */ #define SICR_ENET_MASK ((uint)0x0000ff00) #define SICR_ENET_CLKRT ((uint)0x00002600) + +# ifdef CONFIG_FEC_ENET /* Use FEC for Fast Ethernet */ +#define FEC_ENET +# endif /* CONFIG_FEC_ENET */ + #endif /* CONFIG_MVS v1, CONFIG_TQM823L/M, CONFIG_TQM850L/M, etc. */ /*** TQM855L/M, TQM860L/M, TQM862L/M, TQM866L/M *********************/ diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 9841893899a..d03c05bf349 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -132,6 +132,9 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ + +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/Adder.h b/include/configs/Adder.h index f8075466c48..0e6b50f8b0e 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004 Arabella Software Ltd. + * Copyright (C) 2004-2005 Arabella Software Ltd. * Yuli Barcohen <yuli@arabellasw.com> * * Support for Analogue&Micro Adder boards family. @@ -35,11 +35,13 @@ #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #define CONFIG_BAUDRATE 38400 -#define CONFIG_FEC_ENET /* Ethernet is on FEC */ -#ifdef CONFIG_FEC_ENET +#define CONFIG_ETHER_ON_FEC1 +#define CONFIG_ETHER_ON_FEC2 + +#if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2) #define CFG_DISCOVER_PHY #define FEC_ENET -#endif /* CONFIG_FEC_ENET */ +#endif /* CONFIG_ETHER_ON_FEC || CONFIG_ETHER_ON_FEC2 */ #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ #define CONFIG_8xx_CPUCLK_DEFAULT 50000000 @@ -47,7 +49,7 @@ #ifdef CONFIG_MPC852T #define CFG_8xx_CPUCLK_MAX 50000000 #else -#define CFG_8xx_CPUCLK_MAX 120000000 +#define CFG_8xx_CPUCLK_MAX 133000000 #endif /* CONFIG_MPC852T */ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ @@ -62,7 +64,7 @@ #define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ #define CONFIG_BOOTCOMMAND "bootm fe040000" /* Autoboot command */ -#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw" +#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=1M(ROM)ro,-(root)" #define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* Disable platform specific watchdog */ @@ -79,7 +81,7 @@ #define CFG_MAXARGS 16 /* Max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x100000 /* Default load address */ +#define CFG_LOAD_ADDR 0x400000 /* Default load address */ #define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */ @@ -89,24 +91,21 @@ * RAM configuration (note that CFG_SDRAM_BASE must be zero) */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */ - -#define CFG_OR1_PRELIM (0xFF800000 | OR_CSNT_SAM | OR_ACS_DIV2) -#define CFG_BR1_PRELIM (CFG_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V) +#define CFG_SDRAM_MAX_SIZE 0x01000000 /* Up to 16 Mbyte */ -#define CFG_MAMR 0x00802114 +#define CFG_MAMR 0x00002114 /* - * 2048 SDRAM rows + * 4096 Up to 4096 SDRAM rows * 1000 factor s -> ms - * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration + * 32 PTP (pre-divider from MPTPR) * 4 Number of refresh cycles per period * 64 Refresh cycle in ms per number of rows */ -#define CFG_PTA_PER_CLK ((2048 * 64 * 1000) / (4 * 64)) +#define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64)) #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00700000 /* 1 ... 7 MB in SDRAM */ +#define CFG_MEMTEST_END 0x00500000 /* 1 ... 5 MB in SDRAM */ #define CFG_RESET_ADDRESS 0x09900000 @@ -139,6 +138,8 @@ #define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CONFIG_ENV_OVERWRITE + #define CFG_OR0_PRELIM 0xFF000774 #define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_MS_GPCM | BR_V) diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h new file mode 100644 index 00000000000..5b54f30e08d --- /dev/null +++ b/include/configs/BC3450.h @@ -0,0 +1,568 @@ +/* + * -- Version 1.1 -- + * + * (C) Copyright 2003-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * (C) Copyright 2005 + * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de. + * + * History: + * 1.1 - add define CONFIG_ZERO_BOOTDELAY_CHECK + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on a TQM5200 module */ + +#define CONFIG_BC3450 1 /* ... on a BC3450 mainboard */ +#define CONFIG_BC3450_PS2 1 /* + a PS/2 converter onboard */ +#define CONFIG_BC3450_IDE 1 /* + IDE drives (Compact Flash) */ +#define CONFIG_BC3450_USB 1 /* + USB support */ +# define CONFIG_FAT 1 /* + FAT support */ +# define CONFIG_EXT2 1 /* + EXT2 support */ +#undef CONFIG_BC3450_BUZZER /* + Buzzer onboard */ +#undef CONFIG_BC3450_CAN /* + CAN transceiver */ +#undef CONFIG_BC3450_DS1340 /* + a RTC DS1340 onboard */ +#undef CONFIG_BC3450_DS3231 /* + a RTC DS3231 onboard tbd */ +#undef CONFIG_BC3450_AC97 /* + AC97 on PSC2, tbd */ +#define CONFIG_BC3450_FP 1 /* + enable FP O/P */ +#undef CONFIG_BC3450_CRT /* + enable CRT O/P (Debug only!) */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * AT-PS/2 Multiplexer + */ +#ifdef CONFIG_BC3450_PS2 +# define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ +# define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ +# define CONFIG_PS2SERIAL 6 /* .. on PSC6 */ +# define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */ +# define CONFIG_BOARD_EARLY_INIT_R +#endif /* CONFIG_BC3450_PS2 */ + +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +# define CONFIG_PCI 1 +# define CONFIG_PCI_PNP 1 +/* #define CONFIG_PCI_SCAN_SHOW 1 */ + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 + +#define CONFIG_NET_MULTI 1 +/*#define CONFIG_EEPRO100 XXX - FIXME: conflicts when CONFIG_MII is enabled */ +#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ +#define CONFIG_NS8382X 1 + +#ifdef CONFIG_PCI +# define ADD_PCI_CMD CFG_CMD_PCI +#else +# define ADD_PCI_CMD 0 +#endif + +/* + * Video console + */ +# define CONFIG_VIDEO +# define CONFIG_VIDEO_SM501 +# define CONFIG_VIDEO_SM501_32BPP +# define CONFIG_CFB_CONSOLE +# define CONFIG_VIDEO_LOGO +# define CONFIG_VGA_AS_SINGLE_DEVICE +# define CONFIG_CONSOLE_EXTRA_INFO /* display Board/Device-Infos */ +# define CONFIG_VIDEO_SW_CURSOR +# define CONFIG_SPLASH_SCREEN +# define CFG_CONSOLE_IS_IN_ENV + +#ifdef CONFIG_VIDEO +# define ADD_BMP_CMD CFG_CMD_BMP +#else +# define ADD_BMP_CMD 0 +#endif + +/* + * Partitions + */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* + * USB + */ +#ifdef CONFIG_BC3450_USB +# define CONFIG_USB_OHCI +# define ADD_USB_CMD CFG_CMD_USB +# define CONFIG_USB_STORAGE +#else /* !CONFIG_BC3450_USB */ +# define ADD_USB_CMD 0 +#endif /* CONFIG_BC3450_USB */ + +/* + * POST support + */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_I2C) + +#ifdef CONFIG_POST +# define CFG_CMD_POST_DIAG CFG_CMD_DIAG +/* preserve space for the post_word at end of on-chip SRAM */ +# define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 +#else +# define CFG_CMD_POST_DIAG 0 +#endif /* CONFIG_POST */ + +/* + * IDE + */ +#ifdef CONFIG_BC3450_IDE +# define ADD_IDE_CMD CFG_CMD_IDE +#else +# define ADD_IDE_CMD 0 +#endif /* CONFIG_BC3450_IDE */ + +/* + * Filesystem support + */ +#if defined (CONFIG_BC3450_IDE) || defined (CONFIG_BC3450_USB) +#ifdef CONFIG_FAT +# define ADD_FAT_CMD CFG_CMD_FAT +#else +# define ADD_FAT_CMD 0 +#endif /* CONFIG_FAT */ + +#ifdef CONFIG_EXT2 +# define ADD_EXT2_CMD CFG_CMD_EXT2 +#else +# define ADD_EXT2_CMD 0 +#endif /* CONFIG_EXT2 */ +#endif /* CONFIG_BC3450_IDE / _USB */ + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + ADD_BMP_CMD | \ + ADD_IDE_CMD | \ + ADD_FAT_CMD | \ + ADD_EXT2_CMD | \ + ADD_PCI_CMD | \ + ADD_USB_CMD | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_POST_DIAG | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SNTP | \ + CFG_CMD_BSP) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_TIMESTAMP /* display image timestamps */ + +#if (TEXT_BASE == 0xFC000000) /* Boot low */ +# define CFG_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo;" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ipaddr=192.168.1.10\0" \ + "serverip=192.168.1.3\0" \ + "netmask=255.255.255.0\0" \ + "hostname=bc3450\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "kernel_addr=fc0a0000\0" \ + "ramdisk_addr=fc1c0000\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "ideargs=setenv bootargs root=/dev/hda2 ro\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):$(netdev):off panic=1\0" \ + "addcons=setenv bootargs $(bootargs) " \ + "console=ttyS0,$(baudrate) console=tty0\0" \ + "flash_self=run ramargs addip addcons;" \ + "bootm $(kernel_addr) $(ramdisk_addr)\0" \ + "flash_nfs=run nfsargs addip addcons; bootm $(kernel_addr)\0" \ + "net_nfs=tftp 200000 $(bootfile); " \ + "run nfsargs addip addcons; bootm\0" \ + "ide_nfs=run nfsargs addip addcons; " \ + "disk 200000 0:1; bootm\0" \ + "ide_ide=run ideargs addip addcons; " \ + "disk 200000 0:1; bootm\0" \ + "usb_self=run usbload; run ramargs addip addcons; " \ + "bootm 200000 400000\0" \ + "usbload=usb reset; usb scan; usbboot 200000 0:1; " \ + "usbboot 400000 0:2\0" \ + "bootfile=uImage\0" \ + "load=tftp 200000 $(u-boot)\0" \ + "u-boot=u-boot.bin\0" \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 $(filesize);" \ + "protect on FC000000 FC05FFFF\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +/* + * PCI Bus clocking configuration + * + * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if + * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet + * hasn't been tested with a IPB Bus Clock of 66 MHz. + */ +#if defined(CFG_IPBSPEED_133) +# define CFG_PCISPEED_66 /* define for 66MHz speed */ +#endif + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #2 */ + +/* + * I2C clock frequency + * + * Please notice, that the resulting clock frequency could differ from the + * configured value. This is because the I2C clock is derived from system + * clock over a frequency divider with only a few divider values. U-boot + * calculates the best approximation for CFG_I2C_SPEED. However the calculated + * approximation allways lies below the configured value, never above. + */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration for I²C EEPROM M24C32 + * M24C64 should work also. For other EEPROMs config should be verified. + * + * The TQM5200 module may hold an EEPROM at address 0x50. + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x (TQM) */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70 + +/* + * RTC configuration + */ +#if defined (CONFIG_BC3450_DS1340) && !defined (CONFIG_BC3450_DS3231) +# define CONFIG_RTC_M41T11 1 +# define CFG_I2C_RTC_ADDR 0x68 +#else +# define CONFIG_RTC_MPC5200 1 /* use MPC5200 internal RTC */ +# define CONFIG_BOARD_EARLY_INIT_R +#endif + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */ + +/* use CFI flash driver if no module variant is spezified */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ + +#if !defined(CFG_LOWBOOT) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) +#else /* CFG_LOWBOOT */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +#endif /* CFG_LOWBOOT */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +/* Dynamic MTD partition support */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=TQM5200-0" +#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "16m(big-fs)," \ + "8m(misc)" + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +# define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +# define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif /*CONFIG_POST*/ + +#define CFG_GBL_DATA_SIZE 128 /* Bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + * + * Define CONFIG_FEC10MBIT to force FEC at 10MBIT + */ +#define CONFIG_MPC5xxx_FEC 1 +#undef CONFIG_FEC_10MBIT +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration on BC3450 + * + * PSC1: UART1 (Service-UART) [0x xxxxxxx4] + * PSC2: UART2 [0x xxxxxx4x] + * or: AC/97 if CONFIG_BC3450_AC97 [0x xxxxxx2x] + * PSC3: USB2 [0x xxxxx1xx] + * USB: UART4(ext.)/UART5(int.) [0x xxxx2xxx] + * (this has to match + * CONFIG_USB_CONFIG which is + * used by usb_ohci.c to set + * the USB ports) + * Eth: 10/100Mbit Ethernet [0x xxx0xxxx] + * (this is reset to '5' + * in FEC driver: fec.c) + * PSC6: UART6 (int. to PS/2 contr.) [0x xx5xxxxx] + * ATA/CS: ??? [0x x1xxxxxx] + * FIXME! UM Fig 2-10 suggests [0x x0xxxxxx] + * CS1: Use Pin gpio_wkup_6 as second + * SDRAM chip select (mem_cs1) + * Timer: CAN2 / SPI + * I2C: CAN1 / I²C2 [0x bxxxxxxx] + */ +#ifdef CONFIG_BC3450_AC97 +# define CFG_GPS_PORT_CONFIG 0xb1502124 +#else /* PSC2=UART2 */ +# define CFG_GPS_PORT_CONFIG 0xb1502144 +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max no of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Arg. Buffer Size */ + +#define CFG_ALT_MEMTEST /* Enable an alternative, */ + /* more extensive mem test */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* dec freq: 1ms ticks */ + +/* + * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +# define CFG_HID0_INIT HID0_ICE | HID0_ICFI +# define CFG_HID0_FINAL HID0_ICE +#else +# define CFG_HID0_INIT 0 +# define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#ifdef CFG_PCISPEED_66 +# define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ +#else +# define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ +#endif +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* automatic configuration of chip selects */ +#ifdef CONFIG_TQM5200 +# define CONFIG_LAST_STAGE_INIT +#endif /* CONFIG_TQM5200 */ + +/* + * SRAM - Do not map below 2 GB in address space, because this area is used + * for SDRAM autosizing. + */ +#ifdef CONFIG_TQM5200 +# define CFG_CS2_START 0xE5000000 +# define CFG_CS2_SIZE 0x100000 /* 1 MByte */ +# define CFG_CS2_CFG 0x0004D930 +#endif /* CONFIG_TQM5200 */ + +/* + * Grafic controller - Do not map below 2 GB in address space, because this + * area is used for SDRAM autosizing. + */ +#ifdef CONFIG_TQM5200 +# define SM501_FB_BASE 0xE0000000 +# define CFG_CS1_START (SM501_FB_BASE) +# define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ +# define CFG_CS1_CFG 0x8F48FF70 +# define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 +#endif /* CONFIG_TQM5200 */ + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for */ + /* flash and SM501 */ + +#define CFG_RESET_ADDRESS 0xff000000 + +/* + * USB stuff + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00002000 /* we're using Port 2 */ + +/* + * IDE/ATA stuff Supports IDE harddisk + */ +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + +#endif /* __CONFIG_H */ diff --git a/include/configs/BMW.h b/include/configs/BMW.h index 050054d274c..3bd43d83693 100644 --- a/include/configs/BMW.h +++ b/include/configs/BMW.h @@ -69,6 +69,10 @@ CFG_CMD_DOC | \ CFG_CMD_ELF | \ 0 ) + +/* CFG_CMD_DOC required legacy NAND support */ +#define CFG_NAND_LEGACY + #if 0 #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | \ CFG_CMD_PCI | CFG_CMD_DOC | CFG_CMD_DATE) diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h index ffe89cb78fc..7ec4599ebb5 100644 --- a/include/configs/CATcenter.h +++ b/include/configs/CATcenter.h @@ -193,6 +193,8 @@ */ #define CFG_NAND0_BASE 0xFF400000 #define CFG_NAND1_BASE 0xFF000000 +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE } +#define NAND_BIG_DELAY_US 25 /* For CATcenter there is only NAND on the module */ #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ @@ -218,9 +220,9 @@ #define CFG_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */ -#define NAND_DISABLE_CE(nand) do \ +#define MACRO_NAND_DISABLE_CE(nandptr) do \ { \ - switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ + switch((unsigned long)nandptr) \ { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CE); \ @@ -231,9 +233,9 @@ } \ } while(0) -#define NAND_ENABLE_CE(nand) do \ +#define MACRO_NAND_ENABLE_CE(nandptr) do \ { \ - switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ + switch((unsigned long)nandptr) \ { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CE); \ @@ -244,8 +246,7 @@ } \ } while(0) - -#define NAND_CTL_CLRALE(nandptr) do \ +#define MACRO_NAND_CTL_CLRALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -258,7 +259,7 @@ } \ } while(0) -#define NAND_CTL_SETALE(nandptr) do \ +#define MACRO_NAND_CTL_SETALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -271,7 +272,7 @@ } \ } while(0) -#define NAND_CTL_CLRCLE(nandptr) do \ +#define MACRO_NAND_CTL_CLRCLE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -284,7 +285,7 @@ } \ } while(0) -#define NAND_CTL_SETCLE(nandptr) do { \ +#define MACRO_NAND_CTL_SETCLE(nandptr) do { \ switch((unsigned long)nandptr) { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CLE); \ diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 6025886e3ea..1cca2859f4b 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -81,6 +81,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ diff --git a/include/configs/CPCI2DP.h b/include/configs/CPCI2DP.h index 756bb8ceaca..56fd9a6d356 100644 --- a/include/configs/CPCI2DP.h +++ b/include/configs/CPCI2DP.h @@ -143,8 +143,9 @@ #define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ #define CFG_PCI_SUBSYS_DEVICEID 0x040b /* PCI Device ID: CPCI-2DP */ #define CFG_PCI_CLASSCODE 0x0280 /* PCI Class Code: Network/Other*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ + +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xef000000 /* point to internal regs + PB0/1 */ #define CFG_PCI_PTM2MS 0xff000001 /* 16MB, enable */ @@ -250,14 +251,15 @@ #define CFG_INIT_RAM_ADDR 0x40000000 /* use data cache */ #define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET /*----------------------------------------------------------------------- * GPIO definitions */ #define CFG_EEPROM_WP (0x80000000 >> 13) /* GPIO13 */ +#define CFG_SELF_RST (0x80000000 >> 14) /* GPIO14 */ #define CFG_PB_LED (0x80000000 >> 16) /* GPIO16 */ #define CFG_INTA_FAKE (0x80000000 >> 23) /* GPIO23 */ diff --git a/include/configs/CPCI405.h b/include/configs/CPCI405.h index d49020db76f..047e2f1eef9 100644 --- a/include/configs/CPCI405.h +++ b/include/configs/CPCI405.h @@ -79,6 +79,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -151,8 +153,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h index 13dbe80daf9..d756f447f7f 100644 --- a/include/configs/CPCI4052.h +++ b/include/configs/CPCI4052.h @@ -100,6 +100,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -178,8 +180,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h index aaaafa94fd7..852d94a410a 100644 --- a/include/configs/CPCI405AB.h +++ b/include/configs/CPCI405AB.h @@ -87,6 +87,9 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -161,8 +164,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 5cd9aba9e53..2260327c3f8 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -98,6 +98,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ @@ -183,8 +185,8 @@ #define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ #define CFG_PCI_SUBSYS_DEVICEID2 0x0406 /* PCI Device ID: CPCI-405-A */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h index 8bfd0ee820f..244e45a7505 100644 --- a/include/configs/CPCI750.h +++ b/include/configs/CPCI750.h @@ -12,7 +12,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -57,7 +57,7 @@ #define CONFIG_CPCI750 1 /* this is an CPCI750 board */ -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */ +#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600 */ #undef CONFIG_ECC /* enable ECC support */ @@ -70,10 +70,12 @@ #define CONFIG_IDENT_STRING "Marvell 64360 + IBM750FX" /*#define CFG_HUSH_PARSER*/ -#undef CFG_HUSH_PARSER +#define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_AUTO_COMPLETE 1 + /* Define which ETH port will be used for connecting the network */ #define CFG_ETH_PORT ETH_0 @@ -82,19 +84,19 @@ * for your console driver. * * what to do: - * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial + * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial * cable onto the second DUART channel, change the CFG_DUART port from 1 * to 0 below. * * to use the MPSC, #define CONFIG_MPSC. If you have wired up another * mpsc channel, change CONFIG_MPSC_PORT to the desired value. */ -#define CONFIG_MPSC +#define CONFIG_MPSC #define CONFIG_MPSC_PORT 0 /* to change the default ethernet port, use this define (options: 0, 1, 2) */ #define CONFIG_NET_MULTI -#define MV_ETH_DEVS 1 +#define MV_ETH_DEVS 1 #define CONFIG_ETHER_PORT 0 #undef CONFIG_ETHER_PORT_MII /* use RMII */ @@ -116,38 +118,38 @@ #define CONFIG_SERIAL "AA000001" #define CONFIG_SERVERIP "10.0.0.79" -#define CONFIG_ROOTPATH "/export/nfs_cpci750/%s" +#define CONFIG_ROOTPATH "/export/nfs_cpci750/%s" #define CONFIG_TESTDRAMDATA y -#define CONFIG_TESTDRAMADDRESS n +#define CONFIG_TESTDRAMADDRESS n #define CONFIG_TESETDRAMWALK n /* ----------------------------------------------------------------------------- */ -#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ +#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ +#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ #undef CONFIG_WATCHDOG /* watchdog disabled */ -#undef CONFIG_ALTIVEC /* undef to disable */ +#undef CONFIG_ALTIVEC /* undef to disable */ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ - | CFG_CMD_I2C \ + | CFG_CMD_I2C \ | CFG_CMD_CACHE \ | CFG_CMD_EEPROM \ - | CFG_CMD_PCI \ + | CFG_CMD_PCI \ | CFG_CMD_ELF \ | CFG_CMD_DATE \ - | CFG_CMD_NET \ - | CFG_CMD_PING \ - | CFG_CMD_IDE \ - | CFG_CMD_FAT \ - | CFG_CMD_EXT2 \ + | CFG_CMD_NET \ + | CFG_CMD_PING \ + | CFG_CMD_IDE \ + | CFG_CMD_FAT \ + | CFG_CMD_EXT2 \ ) #define CONFIG_DOS_PARTITION @@ -155,28 +157,40 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CONFIG_USE_CPCIDVI + +#ifdef CONFIG_USE_CPCIDVI +#define CONFIG_VIDEO +#define CONFIG_VIDEO_CT69000 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VIDEO_LOGO +#define CONFIG_I8042_KBD +#define CFG_ISA_IO 0 +#endif + /* * Miscellaneous configurable options */ #define CFG_I2C_EEPROM_ADDR_LEN 2 #define CFG_I2C_MULTI_EEPROMS -#define CFG_I2C_SPEED 80000 /* I2C speed default */ +#define CFG_I2C_SPEED 80000 /* I2C speed default */ #define CFG_GT_DUAL_CPU /* also for JTAG even with one cpu */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ /*#define CFG_MEMTEST_START 0x00400000*/ /* memtest works on */ /*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ -/*#define CFG_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */ +/*#define CFG_MEMTEST_END 0x07c00000*/ /* 4 ... 124 MB in DRAM */ /* #define CFG_DRAM_TEST @@ -184,21 +198,21 @@ * CFG_DRAM_TEST - enables the following tests. * * CFG_DRAM_TEST_DATA - Enables test for shorted or open data lines - * Environment variable 'test_dram_data' must be - * set to 'y'. + * Environment variable 'test_dram_data' must be + * set to 'y'. * CFG_DRAM_TEST_DATA - Enables test to verify that each word is uniquely - * addressable. Environment variable - * 'test_dram_address' must be set to 'y'. + * addressable. Environment variable + * 'test_dram_address' must be set to 'y'. * CFG_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. - * This test takes about 6 minutes to test 64 MB. - * Environment variable 'test_dram_walk' must be - * set to 'y'. + * This test takes about 6 minutes to test 64 MB. + * Environment variable 'test_dram_walk' must be + * set to 'y'. */ #define CFG_DRAM_TEST #if defined(CFG_DRAM_TEST) #define CFG_MEMTEST_START 0x00400000 /* memtest works on */ /*#define CFG_MEMTEST_END 0x00C00000*/ /* 4 ... 12 MB in DRAM */ -#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ +#define CFG_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ #define CFG_DRAM_TEST_DATA #define CFG_DRAM_TEST_ADDRESS #define CFG_DRAM_TEST_WALK @@ -207,10 +221,10 @@ #define CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */ #undef CFG_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ -#define CFG_LOAD_ADDR 0x00300000 /* default load address */ +#define CFG_LOAD_ADDR 0x00300000 /* default load address */ -#define CFG_HZ 1000 /* decr freq: 1ms ticks */ -#define CFG_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ +#define CFG_HZ 1000 /* decr freq: 1ms ticks */ +#define CFG_BUS_HZ 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ #define CFG_BUS_CLK CFG_BUS_HZ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } @@ -237,7 +251,7 @@ * To an unused memory region. The stack will remain in cache until RAM * is initialized */ -#undef CFG_INIT_RAM_LOCK +#undef CFG_INIT_RAM_LOCK /* #define CFG_INIT_RAM_ADDR 0x40000000*/ /* unused memory region */ /* #define CFG_INIT_RAM_ADDR 0xfba00000*/ /* unused memory region */ #define CFG_INIT_RAM_ADDR 0xf1080000 /* unused memory region */ @@ -247,7 +261,7 @@ #define RELOCATE_INTERNAL_RAM_ADDR #ifdef RELOCATE_INTERNAL_RAM_ADDR -/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/ +/*#define CFG_INTERNAL_RAM_ADDR 0xfba00000*/ #define CFG_INTERNAL_RAM_ADDR 0xf1080000 #endif @@ -256,28 +270,34 @@ * (Set up by the startup code) * Please note that CFG_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_BASE 0x00000000 /* Dummies for BAT 4-7 */ -#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */ -#define CFG_SDRAM2_BASE 0x20000000 -#define CFG_SDRAM3_BASE 0x30000000 -#define CFG_SDRAM4_BASE 0x40000000 +#define CFG_SDRAM1_BASE 0x10000000 /* each 256 MByte */ +#define CFG_SDRAM2_BASE 0x20000000 +#define CFG_SDRAM3_BASE 0x30000000 +#define CFG_SDRAM4_BASE 0x40000000 #define CFG_RESET_ADDRESS 0xfff00100 -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE 0xfff00000 -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 256 kB for malloc */ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI_DRIVER #define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ -#define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */ -#define CFG_FLASH_INCREMENT 0x01000000 /* there is only one bank */ #define CFG_FLASH_PROTECTION 1 /* use hardware protection */ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_BASE 0xfc000000 /* start of flash banks */ +#define CFG_FLASH_BASE 0xfc000000 /* start of flash banks */ +#define CFG_MAX_FLASH_BANKS 4 /* max number of memory banks */ +#define CFG_FLASH_INCREMENT 0x01000000 /* size of flash bank */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, \ + CFG_FLASH_BASE + 1*CFG_FLASH_INCREMENT, \ + CFG_FLASH_BASE + 2*CFG_FLASH_INCREMENT, \ + CFG_FLASH_BASE + 3*CFG_FLASH_INCREMENT } +#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ /* areas to map different things with the GT in physical space */ #define CFG_DRAM_BANKS 4 @@ -288,20 +308,20 @@ /* Peripheral Device section */ /*******************************************************/ -/* We have on the cpci750 Board : */ -/* GT-Chipset Register Area */ -/* GT-Chipset internal SRAM 256k */ -/* SRAM on external device module */ -/* Real time clock on external device module */ -/* dobble UART on external device module */ -/* Data flash on external device module */ -/* Boot flash on external device module */ +/* We have on the cpci750 Board : */ +/* GT-Chipset Register Area */ +/* GT-Chipset internal SRAM 256k */ +/* SRAM on external device module */ +/* Real time clock on external device module */ +/* dobble UART on external device module */ +/* Data flash on external device module */ +/* Boot flash on external device module */ /*******************************************************/ #define CFG_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ -#define CFG_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */ +#define CFG_CPCI750_RESET_ADDR 0x14000000 /* After power on Reset the CPCI750 is here */ -#undef MARVEL_STANDARD_CFG -#ifndef MARVEL_STANDARD_CFG +#undef MARVEL_STANDARD_CFG +#ifndef MARVEL_STANDARD_CFG /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ #define CFG_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ /*#define CFG_DEV_BASE 0xfc000000*/ /* GT Devices CS start here */ @@ -313,11 +333,11 @@ #define CFG_DEV2_SPACE 0xfe000000 /* DEV_CS2 flash 3 */ #define CFG_DEV3_SPACE 0xf0000000 /* DEV_CS3 nvram/can */ -#define CFG_BOOT_SIZE _16M /* cpci750 flash 0 */ -#define CFG_DEV0_SIZE _16M /* cpci750 flash 1 */ -#define CFG_DEV1_SIZE _16M /* cpci750 flash 2 */ -#define CFG_DEV2_SIZE _16M /* cpci750 flash 3 */ -#define CFG_DEV3_SIZE _16M /* cpci750 nvram/can */ +#define CFG_BOOT_SIZE _16M /* cpci750 flash 0 */ +#define CFG_DEV0_SIZE _16M /* cpci750 flash 1 */ +#define CFG_DEV1_SIZE _16M /* cpci750 flash 2 */ +#define CFG_DEV2_SIZE _16M /* cpci750 flash 3 */ +#define CFG_DEV3_SIZE _16M /* cpci750 nvram/can */ /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ #endif @@ -326,22 +346,22 @@ #define CFG_DEV0_PAR 0x8FDFFFFF /* 16 bit flash */ #define CFG_DEV1_PAR 0x8FDFFFFF /* 16 bit flash */ #define CFG_DEV2_PAR 0x8FDFFFFF /* 16 bit flash */ -#define CFG_DEV3_PAR 0x8FCFFFFF /* nvram/can */ +#define CFG_DEV3_PAR 0x8FCFFFFF /* nvram/can */ #define CFG_BOOT_PAR 0x8FDFFFFF /* 16 bit flash */ - /* c 4 a 8 2 4 1 c */ - /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ + /* c 4 a 8 2 4 1 c */ + /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ /* MPP Control MV64360 Appendix P P. 632*/ -#define CFG_MPP_CONTROL_0 0x00002222 /* */ -#define CFG_MPP_CONTROL_1 0x11110000 /* */ -#define CFG_MPP_CONTROL_2 0x11111111 /* */ -#define CFG_MPP_CONTROL_3 0x00001111 /* */ -/* #define CFG_SERIAL_PORT_MUX 0x00000102*/ /* */ +#define CFG_MPP_CONTROL_0 0x00002222 /* */ +#define CFG_MPP_CONTROL_1 0x11110000 /* */ +#define CFG_MPP_CONTROL_2 0x11111111 /* */ +#define CFG_MPP_CONTROL_3 0x00001111 /* */ +/* #define CFG_SERIAL_PORT_MUX 0x00000102*/ /* */ #define CFG_GPP_LEVEL_CONTROL 0xffffffff /* 1111 1111 1111 1111 1111 1111 1111 1111*/ @@ -358,12 +378,12 @@ ECC disable non registered DRAM */ /* 31:26 25:22 21:20 19 18 17 16 */ - /* 100001 0000 010 0 0 0 0 */ + /* 100001 0000 010 0 0 0 0 */ /* refresh_count=0x400 phisical interleaving disable virtual interleaving enable */ /* 15 14 13:0 */ - /* 0 1 0x400 */ + /* 0 1 0x400 */ # define CFG_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ @@ -372,14 +392,14 @@ *----------------------------------------------------------------------- */ -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ /* PCI MEMORY MAP section */ #define CFG_PCI0_MEM_BASE 0x80000000 @@ -401,6 +421,8 @@ #define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE) #define CFG_PCI1_IO_SPACE_PCI 0x00000000 +#define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE) + #if defined (CONFIG_750CX) #define CFG_PCI_IDSEL 0x0 #else @@ -411,21 +433,21 @@ * IDE/ATA stuff *----------------------------------------------------------------------- */ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#define CONFIG_IDE_RESET /* no reset for ide supported */ -#define CONFIG_IDE_PREINIT /* check for units */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#define CONFIG_IDE_RESET /* no reset for ide supported */ +#define CONFIG_IDE_PREINIT /* check for units */ -#define CFG_IDE_MAXBUS 2 /* max. 1 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */ +#define CFG_IDE_MAXBUS 2 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */ -#define CFG_ATA_BASE_ADDR 0 -#define CFG_ATA_IDE0_OFFSET 0 -#define CFG_ATA_IDE1_OFFSET 0 +#define CFG_ATA_BASE_ADDR 0 +#define CFG_ATA_IDE0_OFFSET 0 +#define CFG_ATA_IDE1_OFFSET 0 -#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ -#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ -#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */ +#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x0000 /* Offset for alternate registers */ /*---------------------------------------------------------------------- @@ -529,7 +551,7 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- * FLASH organization @@ -541,23 +563,23 @@ #define CFG_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ #if 0 -#define CFG_ENV_IS_IN_FLASH 0 -#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ +#define CFG_ENV_IS_IN_FLASH 0 +#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ #define CFG_ENV_SECT_SIZE 0x10000 #define CFG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */ -/* #define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */ +/* #define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE) */ #endif #define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ #define CFG_EEPROM_PAGE_WRITE_BITS 5 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CFG_I2C_EEPROM_ADDR 0x050 +#define CFG_I2C_EEPROM_ADDR 0x050 #define CFG_ENV_OFFSET 0x200 /* environment starts at the beginning of the EEPROM */ #define CFG_ENV_SIZE 0x600 /* 2048 bytes may be used for env vars*/ #define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */ #define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */ -#define CFG_VXWORKS_MAC_PTR (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40) +#define CFG_VXWORKS_MAC_PTR (CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-0x40) /*----------------------------------------------------------------------- * Cache Configuration @@ -579,7 +601,7 @@ #if defined (CONFIG_750CX) || defined (CONFIG_750FX) #define L2_INIT 0 #else -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ +#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) #endif @@ -590,9 +612,9 @@ * * Boot Flags */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_BOARD_ASM_INIT 1 +#define CFG_BOARD_ASM_INIT 1 #endif /* __CONFIG_H */ diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h index a23d7e50b7b..7a1dada2db5 100644 --- a/include/configs/CPU87.h +++ b/include/configs/CPU87.h @@ -189,6 +189,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + /* * Miscellaneous configurable options */ @@ -453,7 +455,7 @@ #define CFG_MIN_AM_MASK 0xC0000000 /* - * we use the same values for 32 MB and 128 MB SDRAM + * we use the same values for 32 MB, 128 MB and 256 MB SDRAM * refresh rate = 7.68 uS (100 MHz Bus Clock) */ @@ -508,6 +510,24 @@ PSDMR_WRC_1C |\ PSDMR_CL_2) + /* SDRAM initialization values for 10-column chips + */ +#define CFG_OR2_10COL (CFG_MIN_AM_MASK |\ + ORxS_BPD_4 |\ + ORxS_ROWST_PBI1_A4 |\ + ORxS_NUMR_13) + +#define CFG_PSDMR_10COL (PSDMR_PBI |\ + PSDMR_SDAM_A17_IS_A5 |\ + PSDMR_BSMA_A13_A15 |\ + PSDMR_SDA10_PBI1_A6 |\ + PSDMR_RFRC_7_CLK |\ + PSDMR_PRETOACT_2W |\ + PSDMR_ACTTORW_2W |\ + PSDMR_LDOTOPRE_1C |\ + PSDMR_WRC_1C |\ + PSDMR_CL_2) + /* * Init Memory Controller: * @@ -586,9 +606,9 @@ BRx_MS_SDRAM_P |\ BRx_V) -#define CFG_OR2_PRELIM CFG_OR2_9COL +#define CFG_OR2_PRELIM CFG_OR2_8COL -#define CFG_PSDMR CFG_PSDMR_9COL +#define CFG_PSDMR CFG_PSDMR_8COL #endif /* CFG_RAMBOOT */ /* Bank 3 - Dual Ported SRAM diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h new file mode 100644 index 00000000000..720b335b099 --- /dev/null +++ b/include/configs/EB+MCF-EV123.h @@ -0,0 +1,223 @@ +/* + * Configuation settings for the BuS EB+MCF-EV123 boards. + * + * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CONFIG_EB_MCF_EV123_H_ +#define _CONFIG_EB_MCF_EV123_H_ + +#define CONFIG_EB_MCF_EV123 + +#undef DEBUG +#undef CFG_HALT_BEFOR_RAM_JUMP +#undef ET_DEBUG + +/* + * High Level Configuration Options (easy to change) + */ + +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5282 /* define processor type */ + +#define CONFIG_MISC_INIT_R + +#define FEC_ENET +#define CONFIG_ETHADDR 00:CF:52:82:EB:01 + +#define CONFIG_BAUDRATE 9600 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_MONITOR_IS_IN_RAM /* define if monitor is started from a pre-loader */ + +#define CONFIG_BOOTCOMMAND "printenv" + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_ADDR 0xF003C000 /* End of 256K */ +#define CFG_ENV_SECT_SIZE 0x4000 +#define CFG_ENV_IS_IN_FLASH 1 +/* +#define CFG_ENV_IS_EMBEDDED 1 +#define CFG_ENV_ADDR_REDUND 0xF0018000 +#define CFG_ENV_SECT_SIZE_REDUND 0x4000 +*/ +#else +#define CFG_ENV_ADDR 0xFFE04000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +/*#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) */ +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB)) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 5 +#define CFG_PROMPT "\nEV123 U-Boot> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x20000 + +#define CFG_MEMTEST_START 0x100000 +#define CFG_MEMTEST_END 0x400000 +/*#define CFG_DRAM_TEST 1 */ +#undef CFG_DRAM_TEST + +/* Clock and PLL Configuration */ +#define CFG_HZ 10000000 +#define CFG_CLK 58982400 /* 9,8304MHz * 6 */ + +/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ + +#define CFG_MFD 0x01 /* PLL Multiplication Factor Devider */ +#define CFG_RFD 0x00 /* PLL Reduce Frecuency Devider */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +#define CFG_MBAR 0x40000000 + +#define CFG_DISCOVER_PHY +/* #define CFG_ENET_BD_BASE 0x380000 */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE1 0x00000000 +#define CFG_SDRAM_SIZE1 16 /* SDRAM size in MB */ + +/* +#define CFG_SDRAM_BASE0 CFG_SDRAM_BASE1+CFG_SDRAM_SIZE1*1024*1024 +#define CFG_SDRAM_SIZE0 16 */ /* SDRAM size in MB */ + +#define CFG_SDRAM_BASE CFG_SDRAM_BASE1 +#define CFG_SDRAM_SIZE CFG_SDRAM_SIZE1 + +#define CFG_FLASH_BASE 0xFFE00000 +#define CFG_INT_FLASH_BASE 0xF0000000 + +/* If M5282 port is fully implemented the monitor base will be behind + * the vector table. */ +#if (TEXT_BASE != CFG_INT_FLASH_BASE) +#define CFG_MONITOR_BASE (TEXT_BASE + 0x400) +#else +#define CFG_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */ +#endif + +#define CFG_MONITOR_LEN 0x20000 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN 64*1024 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_SECT 35 +#define CFG_MAX_FLASH_BANKS 2 +#define CFG_FLASH_ERASE_TOUT 10000000 +#define CFG_FLASH_PROTECTION + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ + +#define CFG_CS0_BASE CFG_FLASH_BASE +#define CFG_CS0_SIZE 2*1024*1024 +#define CFG_CS0_WIDTH 16 +#define CFG_CS0_RO 0 +#define CFG_CS0_WS 6 + +#define CFG_CS3_BASE 0xE0000000 +#define CFG_CS3_SIZE 1*1024*1024 +#define CFG_CS3_WIDTH 16 +#define CFG_CS3_RO 0 +#define CFG_CS3_WS 6 + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_PACNT 0x0000000 /* Port A D[31:24] */ +#define CFG_PADDR 0x0000000 +#define CFG_PADAT 0x0000000 + +#define CFG_PBCNT 0x0000000 /* Port B D[23:16] */ +#define CFG_PBDDR 0x0000000 +#define CFG_PBDAT 0x0000000 + +#define CFG_PCCNT 0x0000000 /* Port C D[15:08] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 + +#define CFG_PDCNT 0x0000000 /* Port D D[07:00] */ +#define CFG_PCDDR 0x0000000 +#define CFG_PCDAT 0x0000000 + +#define CFG_PEHLPAR 0xC0 +#define CFG_PUAPAR 0x0F /* UA0..UA3 = Uart 0 +1 */ +#define CFG_DDRUA 0x05 +#define CFG_PJPAR 0xFF; + +/*----------------------------------------------------------------------- + * CCM configuration + */ + +#define CFG_CCM_SIZ 0 + +/*---------------------------------------------------------------------*/ +#endif /* _CONFIG_M5282EVB_H */ +/*---------------------------------------------------------------------*/ diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h new file mode 100644 index 00000000000..5507f352b90 --- /dev/null +++ b/include/configs/EP1C20.h @@ -0,0 +1,199 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt@psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1C20 1 /* EP1C20 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 128k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ +#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_RESET_ADDR, since we assume the monitor is stored at the + * reset address, no? This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_RESET_ADDR + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for + * epcs device access is enabled. The base address is the epcs + * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK. + * The register base is currently at offset 0x600 from the memory base. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_EPCSBASE 0x02100200 /* EPCS register base */ + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- leds are, after all, + * board-specific, no? + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */ diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h new file mode 100644 index 00000000000..6eca9f23dc7 --- /dev/null +++ b/include/configs/EP1S10.h @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt@psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1S10 1 /* EP1S10 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB */ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) /* 256k heap */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom + * of flash memory. This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- None for stratix. + *----------------------------------------------------------------------*/ +#undef CFG_NIOS_EPCSBASE + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- since leds are board-specific. + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */ diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h new file mode 100644 index 00000000000..976e79acb6f --- /dev/null +++ b/include/configs/EP1S40.h @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2005, Psyent Corporation <www.psyent.com> + * Scott McNutt <smcnutt@psyent.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*------------------------------------------------------------------------ + * BOARD/CPU + *----------------------------------------------------------------------*/ +#define CONFIG_EP1S40 1 /* EP1S40 board */ +#define CONFIG_SYS_CLK_FREQ 50000000 /* 50 MHz core clk */ + +#define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ +#define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ + +/*------------------------------------------------------------------------ + * CACHE -- the following will support II/s and II/f. The II/s does not + * have dcache, so the cache instructions will behave as NOPs. + *----------------------------------------------------------------------*/ +#define CFG_ICACHE_SIZE 4096 /* 4 KByte total */ +#define CFG_ICACHELINE_SIZE 32 /* 32 bytes/line */ +#define CFG_DCACHE_SIZE 2048 /* 2 KByte (II/f) */ +#define CFG_DCACHELINE_SIZE 4 /* 4 bytes/line (II/f) */ + +/*------------------------------------------------------------------------ + * MEMORY BASE ADDRESSES + *----------------------------------------------------------------------*/ +#define CFG_FLASH_BASE 0x00000000 /* FLASH base addr */ +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ +#define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ +#define CFG_SRAM_SIZE 0x00100000 /* 1 MB */ + +/*------------------------------------------------------------------------ + * MEMORY ORGANIZATION + * -Monitor at top. + * -The heap is placed below the monitor. + * -Global data is placed below the heap. + * -The stack is placed below global data (&grows down). + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256k */ +#define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) /* 256k heap */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_OFFSET (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP CFG_GBL_DATA_OFFSET + +/*------------------------------------------------------------------------ + * FLASH (AM29LV065D) + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_SECT 128 /* Max # sects per bank */ +#define CFG_MAX_FLASH_BANKS 1 /* Max # of flash banks */ +#define CFG_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */ +#define CFG_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */ + +/*------------------------------------------------------------------------ + * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above + * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom + * of flash memory. This will keep the environment in user region + * of flash. NOTE: the monitor length must be multiple of sector size + * (which is common practice). + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment in flash */ +#define CFG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */ +#define CONFIG_ENV_OVERWRITE /* Serial change Ok */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) + +/*------------------------------------------------------------------------ + * CONSOLE + *----------------------------------------------------------------------*/ +#if defined(CONFIG_CONSOLE_JTAG) +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ +#else +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ +#endif + +#define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ +#define CONFIG_BAUDRATE 115200 /* Initial baudrate */ +#define CFG_BAUDRATE_TABLE {115200} /* It's fixed ;-) */ + +#define CFG_CONSOLE_INFO_QUIET 1 /* Suppress console info*/ + +/*------------------------------------------------------------------------ + * EPCS Device -- None for stratix. + *----------------------------------------------------------------------*/ +#undef CFG_NIOS_EPCSBASE + +/*------------------------------------------------------------------------ + * DEBUG + *----------------------------------------------------------------------*/ +#undef CONFIG_ROM_STUBS /* Stubs not in ROM */ + +/*------------------------------------------------------------------------ + * TIMEBASE -- + * + * The high res timer defaults to 1 msec. Since it includes the period + * registers, we can slow it down to 10 msec using TMRCNT. If the default + * period is acceptable, TMRCNT can be left undefined. + *----------------------------------------------------------------------*/ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ +#define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ +#define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ +#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) +#define CFG_HZ (CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1)) + +/*------------------------------------------------------------------------ + * STATUS LED -- Provides a simple blinking led. For Nios2 each board + * must implement its own led routines -- since leds are board-specific. + *----------------------------------------------------------------------*/ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ +#define CONFIG_STATUS_LED /* Enable status driver */ + +#define STATUS_LED_BIT 1 /* Bit-0 on PIO */ +#define STATUS_LED_STATE 1 /* Blinking */ +#define STATUS_LED_PERIOD (500/CFG_NIOS_TMRMS) /* Every 500 msec */ + +/*------------------------------------------------------------------------ + * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ... + * and really doesn't need any additional clutter. So I choose the lazy + * way out to avoid changes there -- define the base address to ensure + * cache bypass so there's no need to monkey with inx/outx macros. + *----------------------------------------------------------------------*/ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ +#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ +#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ +#define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ + +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.2.21 +#define CONFIG_SERVERIP 192.168.2.16 + +/*------------------------------------------------------------------------ + * COMMANDS + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_IRQ | \ + CFG_CMD_LOADS | \ + CFG_CMD_LOADB | \ + CFG_CMD_MEMORY | \ + CFG_CMD_MISC | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_RUN | \ + CFG_CMD_SAVES ) +#include <cmd_confdefs.h> + +/*------------------------------------------------------------------------ + * MISC + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* Provide extended help*/ +#define CFG_PROMPT "==> " /* Command prompt */ +#define CFG_CBSIZE 256 /* Console I/O buf size */ +#define CFG_MAXARGS 16 /* Max command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot arg buf size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */ +#define CFG_LOAD_ADDR CFG_SDRAM_BASE /* Default load address */ +#define CFG_MEMTEST_START CFG_SDRAM_BASE /* Start addr for test */ +#define CFG_MEMTEST_END CFG_INIT_SP - 0x00020000 + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#endif /* __CONFIG_H */ diff --git a/include/configs/EP88x.h b/include/configs/EP88x.h new file mode 100644 index 00000000000..738763b86ff --- /dev/null +++ b/include/configs/EP88x.h @@ -0,0 +1,205 @@ +/* + * Copyright (C) 2005 Arabella Software Ltd. + * Yuli Barcohen <yuli@arabellasw.com> + * + * Support for Embedded Planet EP88x boards. + * Tested on EP88xC with MPC885 CPU, 64MB SDRAM and 16MB flash. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MPC885 + +#define CONFIG_EP88X /* Embedded Planet EP88x board */ + +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */ + +/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#define CONFIG_BAUDRATE 38400 + +#define CONFIG_ETHER_ON_FEC1 /* Enable Ethernet on FEC1 */ +#define CONFIG_ETHER_ON_FEC2 /* Enable Ethernet on FEC2 */ +#if defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2) +#define CFG_DISCOVER_PHY +#define FEC_ENET +#endif /* CONFIG_FEC_ENET */ + +#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ +#define CONFIG_8xx_CPUCLK_DEFAULT 100000000 +#define CFG_8xx_CPUCLK_MIN 40000000 +#define CFG_8xx_CPUCLK_MAX 133000000 + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_DHCP \ + | CFG_CMD_IMMAP \ + | CFG_CMD_MII \ + | CFG_CMD_PING \ + ) + +/* This must be included AFTER the definition of CONFIG_COMMANDS */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 5 /* Autoboot after 5 seconds */ +#define CONFIG_BOOTCOMMAND "bootm fe060000" /* Autoboot command */ +#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:2M(ROM)ro,-(root)" + +#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ +#undef CONFIG_WATCHDOG /* Disable platform specific watchdog */ + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CFG_LONGHELP /* #undef to save memory */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* Max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x400000 /* Default load address */ + +#define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * RAM configuration (note that CFG_SDRAM_BASE must be zero) + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_MAX_SIZE 0x08000000 /* Up to 128 Mbyte */ + +#define CFG_MAMR 0x00805000 + +/* + * 4096 Up to 4096 SDRAM rows + * 1000 factor s -> ms + * 32 PTP (pre-divider from MPTPR) + * 4 Number of refresh cycles per period + * 64 Refresh cycle in ms per number of rows + */ +#define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64)) + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00500000 /* 1 ... 5 MB in SDRAM */ + +#define CFG_RESET_ADDRESS 0x09900000 + +/*----------------------------------------------------------------------- + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */ +#ifdef CONFIG_BZIP2 +#define CFG_MALLOC_LEN (4096 << 10) /* Reserve ~4 MB for malloc() */ +#else +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ +#endif /* CONFIG_BZIP2 */ + +/*----------------------------------------------------------------------- + * Flash organisation + */ +#define CFG_FLASH_BASE 0xFC000000 +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CFG_MAX_FLASH_SECT 512 /* Max num of sects on one chip */ + +/* Environment is in flash */ +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x20000 /* We use one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + +#define CFG_OR0_PRELIM 0xFC000160 +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_32 | BR_MS_GPCM | BR_V) + +#define CFG_DIRECT_FLASH_TFTP + +/*----------------------------------------------------------------------- + * BCSR + */ +#define CFG_OR3_PRELIM 0xFF0005B0 +#define CFG_BR3_PRELIM (0xFA000000 |BR_PS_16 | BR_MS_GPCM | BR_V) + +#define CFG_BCSR 0xFA400000 + +/*----------------------------------------------------------------------- + * Internal Memory Map Register + */ +#define CFG_IMMR 0xF0000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Configuration registers + */ +#ifdef CONFIG_WATCHDOG +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ + SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | \ + SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \ + SYPCR_SWF | SYPCR_SWP) +#endif /* CONFIG_WATCHDOG */ + +#define CFG_SIUMCR (SIUMCR_MLRC01 | SIUMCR_DBGC11) + +/* TBSCR - Time Base Status and Control Register */ +#define CFG_TBSCR (TBSCR_TBF | TBSCR_TBE) + +/* PISCR - Periodic Interrupt Status and Control */ +#define CFG_PISCR PISCR_PS + +/* SCCR - System Clock and reset Control Register */ +#define SCCR_MASK SCCR_EBDF11 +#define CFG_SCCR SCCR_RTSEL + +#define CFG_DER 0 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx chips */ + +/*----------------------------------------------------------------------- + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from flash */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index de8f7ae7112..6613f90a770 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -284,6 +284,8 @@ */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + /* * Verbose help from command monitor. */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 131c21555d3..dc40ebc861d 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -5,6 +5,9 @@ * (C) Copyright 2005 * Stefan Roese, DENX Software Engineering, sr@denx.de. * + * (C) Copyright 2006 + * Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com + * * See file CREDITS for list of people who contributed to this * project. * @@ -61,9 +64,13 @@ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 + #define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address */ +#define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ #define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/ @@ -79,6 +86,7 @@ #else #define CONFIG_VIDEO_SM501_16BPP #endif +#define CONFIG_VIDEO_SM501_FBMEM_OFFSET 0x10000 #define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO #define CONFIG_VGA_AS_SINGLE_DEVICE @@ -122,6 +130,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #undef CONFIG_BZIP2 /* include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ @@ -434,9 +444,12 @@ #define CFG_FPGA_CTRL_VGA0_BL_MODE 0x0008 #define CFG_FPGA_CTRL_CF_RESET 0x0040 #define CFG_FPGA_CTRL_PS2_PWR 0x0080 -#define CFG_FPGA_CTRL_CF_PWR 0x0100 /* low active */ +#define CFG_FPGA_CTRL_CF_PWRN 0x0100 /* low active */ #define CFG_FPGA_CTRL_CF_BUS_EN 0x0200 #define CFG_FPGA_CTRL_LCD_CLK 0x7000 /* Mask for lcd clock */ +#define CFG_FPGA_CTRL_OW_ENABLE 0x8000 + +#define CFG_FPGA_STATUS_CF_DETECT 0x8000 #define LCD_CLK_OFF 0x0000 /* Off */ #define LCD_CLK_02083 0x1000 /* 2.083 MHz */ diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index eb627e881dd..f84e356216b 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -135,6 +135,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index aaa44c53989..29eb874dbf0 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -236,6 +236,7 @@ */ #if (CONFIG_COMMANDS & CFG_CMD_NAND) +#define CFG_NAND_LEGACY #define CFG_NAND0_BASE 0xE1000000 #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h index 65056a21eee..706bdb94f57 100644 --- a/include/configs/ISPAN.h +++ b/include/configs/ISPAN.h @@ -109,7 +109,6 @@ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_MII \ | CFG_CMD_PING \ diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h index afba5c625e8..1152f838d98 100644 --- a/include/configs/IceCube.h +++ b/include/configs/IceCube.h @@ -56,7 +56,9 @@ * 0x40000000 - 0x4fffffff - PCI Memory * 0x50000000 - 0x50ffffff - PCI IO Space */ -#define CONFIG_PCI 1 +#define CONFIG_PCI + +#if defined(CONFIG_PCI) #define CONFIG_PCI_PNP 1 #define CONFIG_PCI_SCAN_SHOW 1 @@ -67,6 +69,8 @@ #define CONFIG_PCI_IO_BUS 0x50000000 #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS #define CONFIG_PCI_IO_SIZE 0x01000000 +#define ADD_PCI_CMD CFG_CMD_PCI +#endif #define CFG_XLB_PIPELINING 1 @@ -76,8 +80,6 @@ #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 -#define ADD_PCI_CMD CFG_CMD_PCI - #else /* MPC5100 */ #define CONFIG_MII 1 @@ -122,9 +124,13 @@ # define CFG_LOWBOOT16 1 #endif #if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */ +#if defined(CONFIG_LITE5200B) +# error CFG_LOWBOOT08 is incompatible with the Lite5200B +#else # define CFG_LOWBOOT 1 # define CFG_LOWBOOT08 1 #endif +#endif /* * Autobooting @@ -160,8 +166,12 @@ /* * IPB Bus clocking configuration. */ -#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ +#if defined(CONFIG_LITE5200B) +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ +#else +#undef CFG_IPBSPEED_133 /* define for 133MHz speed */ #endif +#endif /* CONFIG_MPC5200 */ /* * I2C configuration */ @@ -182,6 +192,20 @@ /* * Flash configuration */ +#if defined(CONFIG_LITE5200B) +#define CFG_FLASH_BASE 0xFE000000 +#define CFG_FLASH_SIZE 0x01000000 +#if !defined(CFG_LOWBOOT) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x01760000 + 0x00800000) +#else /* CFG_LOWBOOT */ +#if defined(CFG_LOWBOOT08) +# error CFG_LOWBOOT08 is incompatible with the Lite5200B +#endif +#if defined(CFG_LOWBOOT16) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x01060000) +#endif +#endif /* CFG_LOWBOOT */ +#else /* !CONFIG_LITE5200B (IceCube)*/ #define CFG_FLASH_BASE 0xFF000000 #define CFG_FLASH_SIZE 0x01000000 #if !defined(CFG_LOWBOOT) @@ -194,6 +218,7 @@ #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000) #endif #endif /* CFG_LOWBOOT */ +#endif /* CONFIG_LITE5200B */ #define CFG_MAX_FLASH_BANKS 2 /* max num of memory banks */ #define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ @@ -203,13 +228,23 @@ #undef CONFIG_FLASH_16BIT /* Flash is 8-bit */ +#if defined(CONFIG_LITE5200B) +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_FLASH_BANKS_LIST {CFG_CS1_START,CFG_CS0_START} +#endif + /* * Environment settings */ #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 0x10000 +#if defined(CONFIG_LITE5200B) +#define CFG_ENV_SECT_SIZE 0x20000 +#else #define CFG_ENV_SECT_SIZE 0x10000 +#endif #define CONFIG_ENV_OVERWRITE 1 /* @@ -246,6 +281,9 @@ */ /* #define CONFIG_FEC_10MBIT 1 */ #define CONFIG_PHY_ADDR 0x00 +#if defined(CONFIG_LITE5200B) +#define CONFIG_FEC_MII100 1 +#endif /* * GPIO configuration @@ -288,6 +326,16 @@ #define CFG_HID0_FINAL 0 #endif +#if defined(CONFIG_LITE5200B) +#define CFG_CS1_START CFG_FLASH_BASE +#define CFG_CS1_SIZE CFG_FLASH_SIZE +#define CFG_CS1_CFG 0x00047800 +#define CFG_CS0_START (CFG_FLASH_BASE + CFG_FLASH_SIZE) +#define CFG_CS0_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_START CFG_CS0_START +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00047800 +#else /* IceCube aka Lite5200 */ #ifdef CONFIG_MPC5200_DDR #define CFG_BOOTCS_START (CFG_CS1_START + CFG_CS1_SIZE) @@ -306,6 +354,7 @@ #define CFG_CS0_SIZE CFG_FLASH_SIZE #endif /* CONFIG_MPC5200_DDR */ +#endif /*CONFIG_LITE5200B */ #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333333 diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h new file mode 100644 index 00000000000..f0fc0134341 --- /dev/null +++ b/include/configs/M5271EVB.h @@ -0,0 +1,156 @@ +/* + * Configuation settings for the Freescale M5271EVB + * + * Based on MC5272C3 and r5200 board configs + * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com> + * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M5271EVB_H +#define _M5271EVB_H + +#define DEBUG +#undef DEBUG + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5271 /* define processor type */ +#define CONFIG_M5271EVB /* define board type */ + +#define CONFIG_IPADDR 192.168.30.1 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_ETHADDR 00:06:3b:01:41:55 + +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG /* disable watchdog */ + +#define CONFIG_BOOTDELAY 5 + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#else +#define CFG_ENV_ADDR 0xffe04000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET ) & ~(CFG_CMD_LOADS | CFG_CMD_LOADB)) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CFG_PROMPT "=> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x00100000 + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000000 +#define CFG_CLK 100000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x40000000 /* Register Base Addrs */ + +/* Enable FEC ethernet */ +#define FEC_ENET +#define CONFIG_NET_RETRY_COUNT 5 +#define CFG_ENET_BD_BASE 0x480000 + +/* + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */ +#define CFG_FLASH_BASE 0xffe00000 + +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CFG_MONITOR_BASE 0x20000 +#else +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#endif + +#define CFG_MONITOR_LEN 0x40000 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN (64*1024) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* FLASH organization */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 11 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 + +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_SIZE 0x200000 + +/* Cache Configuration */ +#define CFG_CACHELINE_SIZE 16 + +/* Port configuration */ +#define CFG_FECI2C 0xF0 + +#endif /* _M5271EVB_H */ diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h index db2147b481a..7e57a0fae14 100644 --- a/include/configs/MIP405.h +++ b/include/configs/MIP405.h @@ -58,7 +58,6 @@ CFG_CMD_CACHE | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_ELF | \ CFG_CMD_FAT | \ @@ -87,6 +86,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " /************************************************************** diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349EMDS.h index d6d2fabeec8..66f164660ee 100644 --- a/include/configs/MPC8349ADS.h +++ b/include/configs/MPC8349EMDS.h @@ -1,5 +1,6 @@ /* - * Copyright 2004 Freescale Semiconductor. + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this * project. @@ -21,9 +22,8 @@ */ /* - * mpc8349ads board configuration file + * mpc8349emds board configuration file * - * Please refer to doc/README.mpc83xxads for more info. */ #ifndef __CONFIG_H @@ -31,25 +31,16 @@ #undef DEBUG -#define CONFIG_MII - /* * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ #define CONFIG_MPC83XX 1 /* MPC83XX family */ #define CONFIG_MPC8349 1 /* MPC8349 specific */ -#define CONFIG_MPC8349ADS 1 /* MPC8349ADS board specific */ +#define CONFIG_MPC8349EMDS 1 /* MPC8349EMDS board specific */ -/* FIXME: Real PCI support will come in a follow-up update. */ #undef CONFIG_PCI - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ - -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ #define PCI_66M #ifdef PCI_66M @@ -61,77 +52,102 @@ #ifndef CONFIG_SYS_CLK_FREQ #ifdef PCI_66M #define CONFIG_SYS_CLK_FREQ 66000000 +#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1 #else #define CONFIG_SYS_CLK_FREQ 33000000 +#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1 #endif #endif -#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ +#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ #define CFG_IMMRBAR 0xE0000000 -#undef CFG_DRAM_TEST /* memory test, takes time */ -#define CFG_MEMTEST_START 0x00000000 /* memtest region */ -#define CFG_MEMTEST_END 0x00100000 +#undef CFG_DRAM_TEST /* memory test, takes time */ +#define CFG_MEMTEST_START 0x00000000 /* memtest region */ +#define CFG_MEMTEST_END 0x00100000 /* * DDR Setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ +#define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ + +/* + * 32-bit data path mode. + * + * Please note that using this mode for devices with the real density of 64-bit + * effectively reduces the amount of available memory due to the effect of + * wrapping around while translating address to row/columns, for example in the + * 256MB module the upper 128MB get aliased with contents of the lower + * 128MB); normally this define should be used for devices with real 32-bit + * data path. + */ +#undef CONFIG_DDR_32BIT -#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CFG_SDRAM_BASE CFG_DDR_BASE +#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE #undef CONFIG_DDR_2T_TIMING -#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE #if defined(CONFIG_SPD_EEPROM) - /* - * Determine DDR configuration from I2C interface. - */ - #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ +/* + * Determine DDR configuration from I2C interface. + */ +#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ #else - /* - * Manually set up DDR parameters - */ - #define CFG_DDR_SIZE 256 /* Mb */ - #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9) - #define CFG_DDR_TIMING_1 0x37344321 - #define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ - #define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ - #define CFG_DDR_MODE 0x00000062 /* DLL,normal,seq,4/2.5 */ - #define CFG_DDR_INTERVAL 0x05200100 /* autocharge,no open page */ +/* + * Manually set up DDR parameters + */ +#define CFG_DDR_SIZE 256 /* MB */ +#define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) +#define CFG_DDR_TIMING_1 0x36332321 +#define CFG_DDR_TIMING_2 0x00000800 /* P9-45,may need tuning */ +#define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */ +#define CFG_DDR_INTERVAL 0x04060100 /* autocharge,no open page */ + +#if defined(CONFIG_DDR_32BIT) +/* set burst length to 8 for 32-bit data path */ +#define CFG_DDR_MODE 0x00000023 /* DLL,normal,seq,4/2.5, 8 burst len */ +#else +/* the default burst length is 4 - for 64-bit data path */ +#define CFG_DDR_MODE 0x00000022 /* DLL,normal,seq,4/2.5, 4 burst len */ +#endif #endif /* * SDRAM on the Local Bus */ -#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ +#define CFG_LBC_SDRAM_BASE 0xF0000000 /* Localbus SDRAM */ #define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ /* * FLASH on the Local Bus */ -#define CFG_FLASH_CFI /* use the Common Flash Interface */ +#define CFG_FLASH_CFI /* use the Common Flash Interface */ #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ #define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ -#define CFG_FLASH_SIZE 8 /* FLASH size in MB */ +#define CFG_FLASH_SIZE 8 /* flash size in MB */ /* #define CFG_FLASH_USE_BUFFER_WRITE */ -#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \ - (2 << BR_PS_SHIFT) | /* 32 bit port size */ \ - BR_V) /* valid */ -#define CFG_OR0_PRELIM 0xff806ff7 /* 16Mb Flash size*/ -#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ -#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 16Mb window size */ +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* flash Base address */ \ + (2 << BR_PS_SHIFT) | /* 32 bit port size */ \ + BR_V) /* valid */ + +#define CFG_OR0_PRELIM 0xFF806FF7 /* 8 MB flash size */ +#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* window base at flash base */ +#define CFG_LBLAWAR0_PRELIM 0x80000016 /* 8 MB window size */ #define CFG_MAX_FLASH_BANKS 1 /* number of banks */ #define CFG_MAX_FLASH_SECT 64 /* sectors per device */ -#undef CFG_FLASH_CHECKSUM +#undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#define CFG_MID_FLASH_JUMP 0x7F000000 -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_MID_FLASH_JUMP 0x7F000000 +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) #define CFG_RAMBOOT @@ -140,25 +156,25 @@ #endif /* - * BCSR register on local bus 32KB, 8-bit wide for ADS config reg + * BCSR register on local bus 32KB, 8-bit wide for MDS config reg */ -#define CFG_BCSR 0xF8000000 -#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ -#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ -#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port-size=8bit, MSEL=GPCM */ -#define CFG_OR1_PRELIM 0xFFFFE8f0 /* length 32K */ +#define CFG_BCSR 0xE2400000 +#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */ +#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ +#define CFG_BR1_PRELIM (CFG_BCSR|0x00000801) /* Port-size=8bit, MSEL=GPCM */ +#define CFG_OR1_PRELIM 0xFFFFE8F0 /* length 32K */ #define CONFIG_L1_INIT_RAM -#define CFG_INIT_RAM_LOCK 1 -#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ -#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ -#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* * Local Bus LCRR and LBCR regs @@ -172,7 +188,7 @@ #define CFG_LB_SDRAM /* if board has SRDAM on local bus */ #ifdef CFG_LB_SDRAM -/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/ +/* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */ /* * Base Register 2 and Option Register 2 configure SDRAM. * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000. @@ -185,34 +201,34 @@ * Valid = BR[31] = 1 * * 0 4 8 12 16 20 24 28 - * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 + * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861 * * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into * FIXME: the top 17 bits of BR2. */ -#define CFG_BR2_PRELIM 0xf0001861 /*Port-size=32bit, MSEL=SDRAM*/ +#define CFG_BR2_PRELIM 0xF0001861 /* Port-size=32bit, MSEL=SDRAM */ #define CFG_LBLAWBAR2_PRELIM 0xF0000000 -#define CFG_LBLAWAR2_PRELIM 0x80000019 /*64M*/ +#define CFG_LBLAWAR2_PRELIM 0x80000019 /* 64M */ /* * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64. * * For OR2, need: * 64MB mask for AM, OR2[0:7] = 1111 1100 - * XAM, OR2[17:18] = 11 + * XAM, OR2[17:18] = 11 * 9 columns OR2[19-21] = 010 * 13 rows OR2[23-25] = 100 * EAD set for extra time OR[31] = 1 * * 0 4 8 12 16 20 24 28 - * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901 + * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901 */ -#define CFG_OR2_PRELIM 0xfc006901 +#define CFG_OR2_PRELIM 0xFC006901 #define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ -#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/ +#define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32 */ /* * LSDMR masks @@ -274,7 +290,7 @@ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CFG_NS16550 #define CFG_NS16550_SERIAL #define CFG_NS16550_REG_SIZE 1 @@ -293,13 +309,13 @@ #endif /* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CONFIG_HARD_I2C /* I2C with hardware support*/ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ #define CFG_I2C_SLAVE 0x7F -#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CFG_I2C_OFFSET 0x3000 -#define CFG_I2C2_OFFSET 0x3100 +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ +#define CFG_I2C_OFFSET 0x3000 +#define CFG_I2C2_OFFSET 0x3100 /* TSEC */ #define CFG_TSEC1_OFFSET 0x24000 @@ -307,18 +323,8 @@ #define CFG_TSEC2_OFFSET 0x25000 #define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET) -/* IO Configuration */ -#define CFG_IO_CONF (\ - IO_CONF_UART |\ - IO_CONF_TSEC1 |\ - IO_CONF_IRQ0 |\ - IO_CONF_IRQ1 |\ - IO_CONF_IRQ2 |\ - IO_CONF_IRQ3 |\ - IO_CONF_IRQ4 |\ - IO_CONF_IRQ5 |\ - IO_CONF_IRQ6 |\ - IO_CONF_IRQ7 ) +/* USB */ +#define CFG_USE_MPC834XSYS_USB_PHY 1 /* Use SYS board PHY */ /* * General PCI @@ -326,20 +332,27 @@ */ #define CFG_PCI1_MEM_BASE 0x80000000 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE -#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI1_MMIO_BASE 0x90000000 +#define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE +#define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ #define CFG_PCI1_IO_BASE 0x00000000 -#define CFG_PCI1_IO_PHYS 0xe2000000 -#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI1_IO_PHYS 0xE2000000 +#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */ #define CFG_PCI2_MEM_BASE 0xA0000000 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE -#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ +#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ +#define CFG_PCI2_MMIO_BASE 0xB0000000 +#define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE +#define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ #define CFG_PCI2_IO_BASE 0x00000000 -#define CFG_PCI2_IO_PHYS 0xe3000000 -#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ +#define CFG_PCI2_IO_PHYS 0xE2100000 +#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */ + #if defined(CONFIG_PCI) -#define PCI_ALL_PCI1 +#define PCI_ONE_PCI1 #if defined(PCI_64BIT) #undef PCI_ALL_PCI1 #undef PCI_TWO_PCI1 @@ -347,7 +360,7 @@ #endif #define CONFIG_NET_MULTI -#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -363,9 +376,14 @@ #endif /* CONFIG_PCI */ +/* + * TSEC configuration + */ +#define CONFIG_TSEC_ENET /* TSEC ethernet support */ + #if defined(CONFIG_TSEC_ENET) #ifndef CONFIG_NET_MULTI -#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_MULTI 1 #endif #define CONFIG_GMII 1 /* MII PHY management */ @@ -384,13 +402,24 @@ #endif /* CONFIG_TSEC_ENET */ /* + * Configure on-board RTC + */ +#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ +#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* * Environment */ #ifndef CFG_RAMBOOT #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) - #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */ + #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ #define CFG_ENV_SIZE 0x2000 + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + #else #define CFG_NO_FLASH 1 /* Flash is not usable now */ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ @@ -406,14 +435,16 @@ #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ | CFG_CMD_PING \ | CFG_CMD_PCI \ - | CFG_CMD_I2C) \ + | CFG_CMD_I2C \ + | CFG_CMD_DATE) \ & \ ~(CFG_CMD_ENV \ | CFG_CMD_LOADS)) #else #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ | CFG_CMD_PING \ - | CFG_CMD_I2C) \ + | CFG_CMD_I2C \ + | CFG_CMD_DATE) \ & \ ~(CFG_CMD_ENV \ | CFG_CMD_LOADS)) @@ -423,12 +454,15 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_PCI \ | CFG_CMD_PING \ - | CFG_CMD_I2C) + | CFG_CMD_I2C \ + | CFG_CMD_DATE \ + ) #else #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_PING \ - | CFG_CMD_I2C \ - | CFG_CMD_MII \ + | CFG_CMD_I2C \ + | CFG_CMD_MII \ + | CFG_CMD_DATE \ ) #endif #endif @@ -440,7 +474,7 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ +#define CFG_LONGHELP /* undef to save memory */ #define CFG_LOAD_ADDR 0x2000000 /* default load address */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ @@ -471,12 +505,42 @@ #define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST */ +#if 1 /*528/264*/ #define CFG_HRCW_LOW (\ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ HRCWL_DDR_TO_SCB_CLK_1X1 |\ - HRCWL_CSB_TO_CLKIN_4X1 |\ + HRCWL_CSB_TO_CLKIN |\ HRCWL_VCO_1X2 |\ HRCWL_CORE_TO_CSB_2X1) +#elif 0 /*396/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_3X1) +#elif 0 /*264/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_2X1) +#elif 0 /*132/132*/ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_1X1) +#elif 0 /*264/264 */ +#define CFG_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ + HRCWL_DDR_TO_SCB_CLK_1X1 |\ + HRCWL_CSB_TO_CLKIN |\ + HRCWL_VCO_1X4 |\ + HRCWL_CORE_TO_CSB_1X1) +#endif #if defined(PCI_64BIT) #define CFG_HRCW_HIGH (\ @@ -506,16 +570,77 @@ HRCWH_TSEC2M_IN_GMII ) #endif -#define CFG_HID0_INIT 0x000000000 +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 +#define CFG_SICRL SICRL_LDP_A -#define CFG_HID0_FINAL CFG_HID0_INIT +#define CFG_HID0_INIT 0x000000000 +#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK /* #define CFG_HID0_FINAL (\ HID0_ENABLE_INSTRUCTION_CACHE |\ HID0_ENABLE_M_BIT |\ HID0_ENABLE_ADDRESS_BROADCAST ) */ -#define CFG_HID2 0x000000000 + +#define CFG_HID2 HID2_HBE + +/* DDR @ 0x00000000 */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +/* PCI @ 0x80000000 */ +#ifdef CONFIG_PCI +#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT1L (0) +#define CFG_IBAT1U (0) +#define CFG_IBAT2L (0) +#define CFG_IBAT2U (0) +#endif + +#ifdef CONFIG_MPC83XX_PCI2 +#define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#else +#define CFG_IBAT3L (0) +#define CFG_IBAT3U (0) +#define CFG_IBAT4L (0) +#define CFG_IBAT4U (0) +#endif + +/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ +#define CFG_IBAT5L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP) + +/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ +#define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT7L (0) +#define CFG_IBAT7U (0) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U /* * Internal Definitions @@ -533,52 +658,59 @@ /* * Environment Configuration */ +#define CONFIG_ENV_OVERWRITE #if defined(CONFIG_TSEC_ENET) -#define CONFIG_ETHADDR 00:04:9f:11:22:33 +#define CONFIG_ETHADDR 00:04:9f:ef:23:33 #define CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:7D:01 +#define CONFIG_ETH1ADDR 00:E0:0C:00:7E:21 #endif -#define CONFIG_IPADDR 192.168.1.253 +#define CONFIG_IPADDR 192.168.205.5 -#define CONFIG_HOSTNAME unknown -#define CONFIG_ROOTPATH /nfsroot -#define CONFIG_BOOTFILE your.uImage +#define CONFIG_HOSTNAME mpc8349emds +#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx +#define CONFIG_BOOTFILE /tftpboot/tqm83xx/uImage -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 +#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ -#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ +#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ #define CONFIG_BAUDRATE 115200 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=400000\0" \ - "ramdiskfile=ramfs.83xx\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "bootm $loadaddr $ramdiskaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=mpc8349emds\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "bootfile=/tftpboot/mpc8349emds/uImage\0" \ + "load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0" \ + "update=protect off fe000000 fe03ffff; " \ + "era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0" \ + "upd=run load;run update\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" #endif /* __CONFIG_H */ diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h index 565f9bb5c03..831cc5ecd32 100644 --- a/include/configs/MPC86xADS.h +++ b/include/configs/MPC86xADS.h @@ -21,7 +21,7 @@ #define CONFIG_MPC86xADS 1 /* new ADS */ #define CONFIG_FADS 1 /* We are FADS compatible (more or less) */ -/* New MPC86xADS - pick one of these */ +/* CPU type - pick one of these */ #define CONFIG_MPC866T 1 #undef CONFIG_MPC866P #undef CONFIG_MPC859T @@ -33,7 +33,10 @@ #undef CONFIG_8xx_CONS_NONE #define CONFIG_BAUDRATE 38400 -#define CONFIG_8xx_OSCLK 10000000 /* 10MHz oscillator on EXTCLK */ +#define CONFIG_8xx_OSCLK 10000000 /* 10MHz oscillator on EXTCLK */ +#define CONFIG_8xx_CPUCLK_DEFAULT 50000000 +#define CFG_8xx_CPUCLK_MIN 40000000 +#define CFG_8xx_CPUCLK_MAX 80000000 #define CONFIG_DRAM_50MHZ 1 #define CONFIG_SDRAM_50MHZ 1 diff --git a/include/configs/MPC885ADS.h b/include/configs/MPC885ADS.h index 74318e55456..1867c5bf0a2 100644 --- a/include/configs/MPC885ADS.h +++ b/include/configs/MPC885ADS.h @@ -1,44 +1,34 @@ /* * A collection of structures, addresses, and values associated with - * the Motorola DUET ADS board. Values common to all FADS family boards + * the Motorola MPC885ADS board. Values common to all FADS family boards * are in board/fads/fads.h * - * Copyright (C) 2003 Arabella Software Ltd. + * Copyright (C) 2003-2004 Arabella Software Ltd. * Yuli Barcohen <yuli@arabellasw.com> */ #ifndef __CONFIG_H #define __CONFIG_H -/* Board type */ -#define CONFIG_MPC885ADS 1 /* Duet (MPC87x/88x) ADS */ +#define CONFIG_MPC885ADS 1 /* MPC885ADS board */ #define CONFIG_FADS 1 /* We are FADS compatible (more or less) */ -#define CONFIG_MPC885 1 /* MPC885 CPU (Duet family) */ +#define CONFIG_MPC885 1 /* MPC885 CPU (Duet family) */ -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ #undef CONFIG_8xx_CONS_SMC2 #undef CONFIG_8xx_CONS_NONE #define CONFIG_BAUDRATE 38400 -#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ - -#define CFG_PLPRCR ((1 << PLPRCR_MFD_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS) +#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ +#define CONFIG_8xx_CPUCLK_DEFAULT 50000000 +#define CFG_8xx_CPUCLK_MIN 40000000 +#define CFG_8xx_CPUCLK_MAX 133000000 #define CONFIG_SDRAM_50MHZ 1 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ - | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ - | CFG_CMD_MII \ - | CFG_CMD_PING \ - ) - #include "fads.h" -#undef CFG_SCCR -#define CFG_SCCR (SCCR_TBS|SCCR_EBDF11) - #define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */ #define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V) diff --git a/include/configs/NC650.h b/include/configs/NC650.h index 371ea17edd2..8da29c4afc0 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -1,4 +1,5 @@ /* + * (C) Copyright 2006 Detlev Zundel, dzu@denx.de * (C) Copyright 2005 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * @@ -65,6 +66,11 @@ #define CFG_8XX_XIN CONFIG_8xx_OSCLK #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d seconds...\n" +#define CONFIG_AUTOBOOT_DELAY_STR "ids" +#define CONFIG_BOOT_RETRY_TIME 900 +#define CONFIG_BOOT_RETRY_MIN 30 #define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" @@ -75,7 +81,7 @@ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ "bootm" -#undef CONFIG_WATCHDOG /* watchdog disabled */ +#define CONFIG_WATCHDOG /* watchdog enabled */ #undef CONFIG_STATUS_LED /* Status LED disabled */ @@ -96,12 +102,26 @@ /* * Software (bit-bang) I2C driver configuration */ +#if defined(CONFIG_IDS852_REV1) + #define SCL 0x1000 /* PA 3 */ #define SDA 0x2000 /* PA 2 */ #define __I2C_DIR immr->im_ioport.iop_padir #define __I2C_DAT immr->im_ioport.iop_padat #define __I2C_PAR immr->im_ioport.iop_papar + +#elif defined(CONFIG_IDS852_REV2) + +#define SCL 0x0002 /* PB 30 */ +#define SDA 0x0001 /* PB 31 */ + +#define __I2C_PAR immr->im_cpm.cp_pbpar +#define __I2C_DIR immr->im_cpm.cp_pbdir +#define __I2C_DAT immr->im_cpm.cp_pbdat + +#endif + #define I2C_INIT { __I2C_PAR &= ~(SDA|SCL); \ __I2C_DIR |= (SDA|SCL); } #define I2C_READ ((__I2C_DAT & SDA) ? 1 : 0) @@ -217,6 +237,8 @@ /* * NAND flash support */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 #define NAND_ChipID_UNKNOWN 0x00 #define SECTORSIZE 512 @@ -227,17 +249,6 @@ #define ADDR_COLUMN 1 #define NAND_NO_RB -#define NAND_WAIT_READY(nand) udelay(12) -#define WRITE_NAND_COMMAND(d, adr) WRITE_NAND(d, adr + 2) -#define WRITE_NAND_ADDRESS(d, adr) WRITE_NAND(d, adr + 1) -#define WRITE_NAND(d, adr) (*(volatile uint8_t *)(adr) = (uint8_t)(d)) -#define READ_NAND(adr) (*(volatile uint8_t *)(adr)) -#define NAND_DISABLE_CE(nand) /* nop */ -#define NAND_ENABLE_CE(nand) /* nop */ -#define NAND_CTL_CLRALE(nandptr) /* nop */ -#define NAND_CTL_SETALE(nandptr) /* nop */ -#define NAND_CTL_CLRCLE(nandptr) /* nop */ -#define NAND_CTL_SETCLE(nandptr) /* nop */ /*----------------------------------------------------------------------- * SYPCR - System Protection Control 11-9 @@ -310,7 +321,8 @@ #define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V) /* - * BR2 and OR2 (NAND Flash) - now addressed through UPMB + * BR2 and OR2 (NAND Flash) - addressed through UPMB on rev 1 + * rev2 only uses the chipselect */ #define CFG_NAND_BASE 0x50000000 #define CFG_NAND_SIZE 0x04000000 @@ -336,6 +348,18 @@ #define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V) /* + * BR4 and OR4 (CPLD) + */ +#define CFG_CPLD_BASE 0x80000000 /* CPLD */ +#define CFG_CPLD_SIZE 0x10000 /* only 16 used */ + +#define CFG_OR_TIMING_CPLD (OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \ + OR_SCY_1_CLK) + +#define CFG_BR4_PRELIM ((CFG_CPLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) +#define CFG_OR4_PRELIM (((-CFG_CPLD_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_CPLD) + +/* * BR5 and OR5 (SRAM) */ #define CFG_SRAM_BASE 0x60000000 @@ -347,6 +371,16 @@ #define CFG_BR5_PRELIM ((CFG_SRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) #define CFG_OR5_PRELIM (((-CFG_SRAM_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_SRAM) +#if defined(CONFIG_CP850) +/* + * BR6 and OR6 (DPRAM) - only on CP850 + */ +#define CFG_OR6_PRELIM 0xffff8170 +#define CFG_BR6_PRELIM 0xa0000401 +#define DPRAM_BASE_ADDR 0xa0000000 + +#define CONFIG_MISC_INIT_R 1 +#endif /* * 4096 Rows from SDRAM example configuration @@ -411,14 +445,12 @@ #define CONFIG_JFFS2_PART_OFFSET 0x00000000 /* mtdparts command line support */ -/* #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor0=nc650-0,nand0=nc650-nand" #define MTDPARTS_DEFAULT "mtdparts=nc650-0:1m(kernel1),1m(kernel2)," \ - "2560k(cramfs1),2560k(cramfs2)," \ - "256k(u-boot),256k(env);" \ - "nc650-nand:4m(nand1),28m(nand2)" -*/ + "4m(cramfs1),1m(cramfs2)," \ + "256k(u-boot),128k(env);" \ + "nc650-nand:4m(jffs1),28m(jffs2)" #endif /* __CONFIG_H */ diff --git a/include/configs/NETPHONE.h b/include/configs/NETPHONE.h index bf4c899592f..444f721cc85 100644 --- a/include/configs/NETPHONE.h +++ b/include/configs/NETPHONE.h @@ -491,6 +491,7 @@ /****************************************************************/ /* NAND */ +#define CFG_NAND_LEGACY #define CFG_NAND_BASE NAND_BASE #define CONFIG_MTD_NAND_ECC_JFFS2 #define CONFIG_MTD_NAND_VERIFY_WRITE diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 1bcd88d208a..25b63457c74 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -609,6 +609,7 @@ /****************************************************************/ /* NAND */ +#define CFG_NAND_LEGACY #define CFG_NAND_BASE NAND_BASE #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_MTD_NAND_UNSAFE diff --git a/include/configs/NETTA2.h b/include/configs/NETTA2.h index 529cb4cbae2..e20e72495cc 100644 --- a/include/configs/NETTA2.h +++ b/include/configs/NETTA2.h @@ -491,6 +491,7 @@ /****************************************************************/ /* NAND */ +#define CFG_NAND_LEGACY #define CFG_NAND_BASE NAND_BASE #define CONFIG_MTD_NAND_ECC_JFFS2 #define CONFIG_MTD_NAND_VERIFY_WRITE diff --git a/include/configs/NETVIA.h b/include/configs/NETVIA.h index dc6b15fcdc4..e30be0987aa 100644 --- a/include/configs/NETVIA.h +++ b/include/configs/NETVIA.h @@ -387,6 +387,8 @@ /*****************************************************************************/ +#define CFG_NAND_LEGACY + #if defined(CONFIG_NETVIA_VERSION) && CONFIG_NETVIA_VERSION >= 2 /* NAND */ diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h index d03706e1936..3a97fbcbde8 100644 --- a/include/configs/PCIPPC2.h +++ b/include/configs/PCIPPC2.h @@ -77,6 +77,7 @@ */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY /* * Miscellaneous configurable options diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h index 92b2f7cf839..130beb78e63 100644 --- a/include/configs/PCIPPC6.h +++ b/include/configs/PCIPPC6.h @@ -79,6 +79,7 @@ */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY /* * Miscellaneous configurable options diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h index 9668fb0ce2f..806e95f4808 100644 --- a/include/configs/PIP405.h +++ b/include/configs/PIP405.h @@ -50,7 +50,6 @@ CFG_CMD_PCI | \ CFG_CMD_CACHE | \ CFG_CMD_IRQ | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_REGINFO | \ @@ -69,6 +68,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + #define CFG_HUSH_PARSER #define CFG_PROMPT_HUSH_PS2 "> " /************************************************************** diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h index 91e95186a23..83a7ec27b43 100644 --- a/include/configs/PK1C20.h +++ b/include/configs/PK1C20.h @@ -32,7 +32,7 @@ #define CFG_RESET_ADDR 0x00000000 /* Hard-reset address */ #define CFG_EXCEPTION_ADDR 0x01000020 /* Exception entry point*/ -#define CFG_NIOS_SYSID_BASE 0x00920828 /* System id address */ +#define CFG_NIOS_SYSID_BASE 0x021208b8 /* System id address */ #define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/ /*------------------------------------------------------------------------ @@ -51,7 +51,7 @@ #define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ #define CFG_SDRAM_BASE 0x01000000 /* SDRAM base addr */ #define CFG_SDRAM_SIZE 0x01000000 /* 16 MByte */ -#define CFG_SRAM_BASE 0x00800000 /* SRAM base addr */ +#define CFG_SRAM_BASE 0x02000000 /* SRAM base addr */ #define CFG_SRAM_SIZE 0x00100000 /* 1 MB (only 1M mapped)*/ /*------------------------------------------------------------------------ @@ -61,7 +61,7 @@ * -Global data is placed below the heap. * -The stack is placed below global data (&grows down). *----------------------------------------------------------------------*/ -#define CFG_MONITOR_LEN (128 * 1024) /* Reserve 128k */ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 128k */ #define CFG_GBL_DATA_SIZE 128 /* Global data size rsvd*/ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) @@ -95,9 +95,9 @@ * CONSOLE *----------------------------------------------------------------------*/ #if defined(CONFIG_CONSOLE_JTAG) -#define CFG_NIOS_CONSOLE 0x00920820 /* JTAG UART base addr */ +#define CFG_NIOS_CONSOLE 0x021208b0 /* JTAG UART base addr */ #else -#define CFG_NIOS_CONSOLE 0x009208a0 /* UART base addr */ +#define CFG_NIOS_CONSOLE 0x02120840 /* UART base addr */ #endif #define CFG_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */ @@ -110,9 +110,9 @@ * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for * epcs device access is enabled. The base address is the epcs * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK. - * The register base is currently at offset 0x400 from the memory base. + * The register base is currently at offset 0x600 from the memory base. *----------------------------------------------------------------------*/ -#define CFG_NIOS_EPCSBASE 0x00900400 /* EPCS register base */ +#define CFG_NIOS_EPCSBASE 0x02100200 /* EPCS register base */ /*------------------------------------------------------------------------ * DEBUG @@ -126,7 +126,7 @@ * registers, we can slow it down to 10 msec using TMRCNT. If the default * period is acceptable, TMRCNT can be left undefined. *----------------------------------------------------------------------*/ -#define CFG_NIOS_TMRBASE 0x00920860 /* Tick timer base addr */ +#define CFG_NIOS_TMRBASE 0x02120820 /* Tick timer base addr */ #define CFG_NIOS_TMRIRQ 3 /* Timer IRQ num */ #define CFG_NIOS_TMRMS 10 /* 10 msec per tick */ #define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000)) @@ -137,7 +137,7 @@ * must implement its own led routines -- leds are, after all, * board-specific, no? *----------------------------------------------------------------------*/ -#define CFG_LEDPIO_ADDR 0x00920840 /* LED PIO base addr */ +#define CFG_LEDPIO_ADDR 0x02120870 /* LED PIO base addr */ #define CONFIG_STATUS_LED /* Enable status driver */ #define STATUS_LED_BIT 1 /* Bit-0 on PIO */ @@ -150,7 +150,7 @@ * way out to avoid changes there -- define the base address to ensure * cache bypass so there's no need to monkey with inx/outx macros. *----------------------------------------------------------------------*/ -#define CONFIG_SMC91111_BASE 0x80910300 /* Base addr (bypass) */ +#define CONFIG_SMC91111_BASE 0x82110300 /* Base addr (bypass) */ #define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */ #undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */ #define CONFIG_SMC_USE_32_BIT /* 32-bit interface */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 54ecfa4c5e3..dd5d8316804 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -160,6 +160,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/PM520.h b/include/configs/PM520.h index 9f1dec82b87..9c241e67e73 100644 --- a/include/configs/PM520.h +++ b/include/configs/PM520.h @@ -101,6 +101,8 @@ #define ADD_DOC_CMD 0 #else #define ADD_DOC_CMD CFG_CMD_DOC +/* DoC requires legacy NAND for now */ +#define CFG_NAND_LEGACY #endif /* @@ -200,12 +202,13 @@ * Flash configuration (8,16 or 32 MB) * TEXT base always at 0xFFF00000 * ENV_ADDR always at 0xFFF40000 - * FLASH_BASE at 0xFC000000 for 32 MB + * FLASH_BASE at 0xFA000000 for 64 MB + * 0xFC000000 for 32 MB * 0xFD000000 for 16 MB * 0xFD800000 for 8 MB */ -#define CFG_FLASH_BASE 0xfc000000 -#define CFG_FLASH_SIZE 0x02000000 +#define CFG_FLASH_BASE 0xFA000000 +#define CFG_FLASH_SIZE 0x04000000 #define CFG_BOOTROM_BASE 0xFFF00000 #define CFG_BOOTROM_SIZE 0x00080000 #define CFG_ENV_ADDR (0xFDF00000 + 0x40000) @@ -214,17 +217,18 @@ * Flash configuration (8,16 or 32 MB) * TEXT base always at 0xFFF00000 * ENV_ADDR always at 0xFFF40000 - * FLASH_BASE at 0xFE000000 for 32 MB + * FLASH_BASE at 0xFC000000 for 64 MB + * 0xFE000000 for 32 MB * 0xFF000000 for 16 MB * 0xFF800000 for 8 MB */ -#define CFG_FLASH_BASE 0xfe000000 -#define CFG_FLASH_SIZE 0x02000000 +#define CFG_FLASH_BASE 0xFC000000 +#define CFG_FLASH_SIZE 0x04000000 #define CFG_ENV_ADDR (0xFFF00000 + 0x40000) #endif #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */ +#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ #define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ @@ -325,11 +329,11 @@ #define CFG_CS0_SIZE CFG_BOOTROM_SIZE #define CFG_CS1_START CFG_FLASH_BASE #define CFG_CS1_SIZE CFG_FLASH_SIZE -#define CFG_CS1_CFG 0x0004fb00 +#define CFG_CS1_CFG 0x0004FF00 #else #define CFG_BOOTCS_START CFG_FLASH_BASE #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE -#define CFG_BOOTCS_CFG 0x0004fb00 +#define CFG_BOOTCS_CFG 0x0004FF00 #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE #define CFG_CS1_START CFG_DOC_BASE diff --git a/include/configs/PM826.h b/include/configs/PM826.h index 6e5e3bbe18c..88fdb51adef 100644 --- a/include/configs/PM826.h +++ b/include/configs/PM826.h @@ -180,6 +180,8 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY + /* * Disk-On-Chip configuration */ diff --git a/include/configs/PM828.h b/include/configs/PM828.h index 982a1f81430..37ee9771b52 100644 --- a/include/configs/PM828.h +++ b/include/configs/PM828.h @@ -183,6 +183,7 @@ /* * Disk-On-Chip configuration */ +#define CFG_NAND_LEGACY #define CFG_DOC_SHORT_TIMEOUT #define CFG_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 8bcab0b0f37..6e0bd7f23ec 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -53,9 +53,15 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_NET_MULTI 1 +#undef CONFIG_HAS_ETH1 + #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_BSP | \ @@ -154,15 +160,24 @@ #define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ #define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ -#define CFG_PCI_SUBSYS_DEVICEID 0x0408 /* PCI Device ID: PMC-405 */ +#define CFG_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID: Non-Monarch */ +#define CFG_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID: Monarch */ +#define CFG_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid() + #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ + +#define CFG_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CFG_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#if 1 +#define CFG_PCI_PTM2LA 0xef000000 /* point to internal regs */ +#define CFG_PCI_PTM2MS 0xff000001 /* 16MB, enable */ +#define CFG_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */ +#else /* old mapping */ #define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */ #define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ #define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ - +#endif /*----------------------------------------------------------------------- * Start addresses for the final memory configuration * (Set up by the startup code) @@ -259,7 +274,7 @@ #define FLASH1_BA 0xFE000000 /* FLASH 1 Base Address */ #define CAN_BA 0xF0000000 /* CAN Base Address */ #define RTC_BA 0xF0000500 /* RTC Base Address */ -#define CF_BA 0xF0100000 /* CompactFlash Base Address */ +#define NVRAM_BA 0xF0200000 /* NVRAM Base Address */ /* Memory Bank 0 (Flash Bank 0) initialization */ #define CFG_EBC_PB0AP 0x92015480 @@ -273,9 +288,11 @@ #define CFG_EBC_PB2AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ #define CFG_EBC_PB2CR CAN_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ -/* Memory Bank 3 (CompactFlash IDE, FPGA internal) initialization */ -#define CFG_EBC_PB3AP 0x010059C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */ -#define CFG_EBC_PB3CR CF_BA | 0x1A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */ +/* Memory Bank 3 -> unused */ + +/* Memory Bank 4 (NVRAM) initialization */ +#define CFG_EBC_PB4AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ +#define CFG_EBC_PB4CR NVRAM_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ /*----------------------------------------------------------------------- * FPGA stuff @@ -293,6 +310,15 @@ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ /*----------------------------------------------------------------------- + * GPIOs + */ +#define CFG_NONMONARCH (0x80000000 >> 14) /* GPIO24 */ +#define CFG_XEREADY (0x80000000 >> 15) /* GPIO15 */ +#define CFG_INTA_FAKE (0x80000000 >> 19) /* GPIO19 */ +#define CFG_SELF_RST (0x80000000 >> 21) /* GPIO21 */ +#define CFG_REV1_2 (0x80000000 >> 23) /* GPIO23 */ + +/*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in data cache) */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 7ca827fa4b4..16e2cc6d648 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -139,8 +139,18 @@ #define CFG_I2C_RTC_ADDR 0x68 #define CFG_M41T11_BASE_YEAR 1900 +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +/* SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 2 +#define CFG_SDRAM_tRP 20 +#define CFG_SDRAM_tRC 65 +#define CFG_SDRAM_tRCD 20 +#undef CFG_SDRAM_tRFC + /* * Miscellaneous configurable options */ @@ -188,34 +198,34 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +/* + * nand device 1 on dave (PPChameleonEVB) needs more time, + * so we just introduce additional wait in nand_wait(), + * effectively for both devices. + */ +#define PPCHAMELON_NAND_TIMER_HACK + #define CFG_NAND0_BASE 0xFF400000 #define CFG_NAND1_BASE 0xFF000000 +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE, CFG_NAND1_BASE } +#define NAND_BIG_DELAY_US 25 +#define CFG_MAX_NAND_DEVICE 2 /* Max number of NAND devices */ -#define CFG_MAX_NAND_DEVICE 2 /* Max number of NAND devices */ -#define SECTORSIZE 512 -#define NAND_NO_RB - -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 - -#define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 #define NAND_MAX_CHIPS 1 #define CFG_NAND0_CE (0x80000000 >> 1) /* our CE is GPIO1 */ +#define CFG_NAND0_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ #define CFG_NAND0_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ #define CFG_NAND0_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ -#define CFG_NAND0_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ #define CFG_NAND1_CE (0x80000000 >> 14) /* our CE is GPIO14 */ +#define CFG_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */ #define CFG_NAND1_CLE (0x80000000 >> 15) /* our CLE is GPIO15 */ #define CFG_NAND1_ALE (0x80000000 >> 16) /* our ALE is GPIO16 */ -#define CFG_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */ -#define NAND_DISABLE_CE(nand) do \ +#define MACRO_NAND_DISABLE_CE(nandptr) do \ { \ - switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ + switch((unsigned long)nandptr) \ { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CE); \ @@ -226,9 +236,9 @@ } \ } while(0) -#define NAND_ENABLE_CE(nand) do \ +#define MACRO_NAND_ENABLE_CE(nandptr) do \ { \ - switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ + switch((unsigned long)nandptr) \ { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_NAND0_CE); \ @@ -239,7 +249,7 @@ } \ } while(0) -#define NAND_CTL_CLRALE(nandptr) do \ +#define MACRO_NAND_CTL_CLRALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -252,7 +262,7 @@ } \ } while(0) -#define NAND_CTL_SETALE(nandptr) do \ +#define MACRO_NAND_CTL_SETALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -265,7 +275,7 @@ } \ } while(0) -#define NAND_CTL_CLRCLE(nandptr) do \ +#define MACRO_NAND_CTL_CLRCLE(nandptr) do \ { \ switch((unsigned long)nandptr) \ { \ @@ -278,7 +288,7 @@ } \ } while(0) -#define NAND_CTL_SETCLE(nandptr) do { \ +#define MACRO_NAND_CTL_SETCLE(nandptr) do { \ switch((unsigned long)nandptr) { \ case CFG_NAND0_BASE: \ out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND0_CLE); \ @@ -289,6 +299,17 @@ } \ } while(0) +#if 0 +#define SECTORSIZE 512 +#define NAND_NO_RB + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 + #ifdef NAND_NO_RB /* constant delay (see also tR in the datasheet) */ #define NAND_WAIT_READY(nand) do { \ @@ -303,7 +324,7 @@ #define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)(d); } while(0) #define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) #define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) - +#endif /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- @@ -338,16 +359,16 @@ #define CFG_SDRAM_BASE 0x00000000 /* Reserve 256 kB for Monitor */ +/* #define CFG_FLASH_BASE 0xFFFC0000 #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN (256 * 1024) +*/ /* Reserve 320 kB for Monitor */ -/* #define CFG_FLASH_BASE 0xFFFB0000 #define CFG_MONITOR_BASE CFG_FLASH_BASE #define CFG_MONITOR_LEN (320 * 1024) -*/ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index 6b650310994..48ada0ed9b6 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -21,10 +21,6 @@ * MA 02111-1307 USA */ -/* - * board/config.h - configuration options, board specific - */ - /* Yoo. Jonghoon, IPone, yooth@ipone.co.kr * U-Boot port on RPXlite board */ @@ -53,8 +49,6 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #endif -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - #undef CONFIG_BOOTARGS #define CONFIG_BOOTCOMMAND \ "bootp; " \ @@ -65,6 +59,7 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ +#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) @@ -86,12 +81,14 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x0040000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */ +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_RESET_ADDRESS 0x09900000 -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_LOAD_ADDR 0x400000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } @@ -120,16 +117,14 @@ * Please note that CFG_SDRAM_BASE _must_ start at 0 */ #define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xFFC00000 -/*%%% #define CFG_FLASH_BASE 0xFFF00000 */ -#if defined(DEBUG) || (CONFIG_COMMANDS & CFG_CMD_IDE) +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_MONITOR_BASE TEXT_BASE #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#ifdef CONFIG_BZIP2 +#define CFG_MALLOC_LEN (4096 << 10) /* Reserve ~4 MB for malloc() */ #else -#define CFG_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif -#define CFG_MONITOR_BASE 0xFFF00000 -/*%%% #define CFG_MONITOR_BASE CFG_FLASH_BASE */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ +#endif /* CONFIG_BZIP2 */ /* * For booting Linux, the board info and command line data @@ -147,9 +142,13 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_DIRECT_FLASH_TFTP + #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + +#define CONFIG_ENV_OVERWRITE /*----------------------------------------------------------------------- * Cache Configuration @@ -352,12 +351,12 @@ #define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ #define BCSR0_ENNVRAM 0x02 /* CS4# Control */ -#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ -#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ +#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ +#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ #define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ #define BCSR0_COLTEST 0x20 #define BCSR0_ETHLPBK 0x40 -#define BCSR0_ETHEN 0x80 +#define BCSR0_ETHEN 0x80 #define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ #define BCSR1_PCVCTL6 0x02 @@ -371,22 +370,13 @@ #define BCSR2_USBSPD 0x40 #define BCSR2_USBSUSP 0x80 -#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ -#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ +#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ +#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ #define BCSR3_RDY_BSY 0x04 /* Flash Operation */ -#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ -#define BCSR3_D27 0x10 /* Dip Switch settings */ -#define BCSR3_D26 0x20 -#define BCSR3_D25 0x40 -#define BCSR3_D24 0x80 - - -/* - * Environment setting - */ - -#define CONFIG_ETHADDR 00:10:EC:00:1D:0B -#define CONFIG_IPADDR 192.168.1.65 -#define CONFIG_SERVERIP 192.168.1.27 +#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ +#define BCSR3_D27 0x10 /* Dip Switch settings */ +#define BCSR3_D26 0x20 +#define BCSR3_D25 0x40 +#define BCSR3_D24 0x80 #endif /* __CONFIG_H */ diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index 8cd7df1ecff..31025473f43 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -45,7 +45,7 @@ */ /* #define DEBUG 1 */ -/* #ifdef DEPLOYMENT 1 */ +/* #define DEPLOYMENT 1 */ #undef CONFIG_MPC860 #define CONFIG_MPC823 1 /* This is a MPC823e CPU. */ @@ -61,23 +61,23 @@ #define CONFIG_BAUDRATE 9600 /* console default baudrate = 9600bps */ #ifdef DEBUG -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else -#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */ +#define CONFIG_BOOTDELAY 6 /* autoboot after 6 seconds */ #ifdef DEPLOYMENT -#define CONFIG_BOOT_RETRY_TIME -1 +#define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n" -#define CONFIG_AUTOBOOT_STOP_STR "st" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n" +#define CONFIG_AUTOBOOT_STOP_STR "st" #define CONFIG_ZERO_BOOTDELAY_CHECK -#define CONFIG_RESET_TO_RETRY 1 -#define CONFIG_BOOT_RETRY_MIN 1 +#define CONFIG_RESET_TO_RETRY 1 +#define CONFIG_BOOT_RETRY_MIN 1 #endif /* DEPLOYMENT */ #endif /* DEBUG */ /* pre-boot commands */ -#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial" +#define CONFIG_PREBOOT "setenv stdout serial;setenv stdin serial" #undef CONFIG_BOOTARGS #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -117,6 +117,36 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) +#if 1 /* Enable this stuff could make image enlarge about 25KB. Mask it if you + don't want the advanced function */ + +#ifdef CONFIG_SPLASH_SCREEN +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_BMP | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_REGINFO | \ + CFG_CMD_DHCP ) +#else +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_REGINFO | \ + CFG_CMD_DHCP ) +#endif /* CONFIG_SPLASH_SCREEN */ + +/* test-only */ +#define CFG_JFFS2_FIRST_BANK 0 /* use for JFFS2 */ +#define CFG_JFFS2_NUM_BANKS 1 /* ! second bank contains U-Boot */ + +#define CONFIG_NETCONSOLE + +#endif /* 1 */ + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -280,7 +310,7 @@ #if defined(RPXlite_64MHz) #define CFG_SCCR ( SCCR_TBS | SCCR_EBDF01 ) /* %%%SCCR:0x02020000 */ #else -#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */ +#define CFG_SCCR ( SCCR_TBS | SCCR_EBDF00 ) /* %%%SCCR:0x02000000 */ #endif /*----------------------------------------------------------------------- @@ -446,5 +476,6 @@ #define CONFIG_SERVERIP 172.16.115.6 #define CONFIG_ROOTPATH /workspace/myfilesystem/target/ #define CONFIG_BOOTFILE uImage.rpxusb +#define CONFIG_HOSTNAME LITE_H1_DW #endif /* __CONFIG_H */ diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h index 6ae9403c469..45907aa0e79 100644 --- a/include/configs/RPXsuper.h +++ b/include/configs/RPXsuper.h @@ -154,7 +154,6 @@ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_IMMAP | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_REGINFO & \ ~CFG_CMD_KGDB ) diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h index a170f290e0e..dbc57e8b271 100644 --- a/include/configs/Rattler.h +++ b/include/configs/Rattler.h @@ -127,7 +127,6 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_JFFS2 \ | CFG_CMD_MII \ diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index c1c765f39d0..a8454d99fc0 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -183,6 +183,7 @@ */ /* NAND flash support */ +#define CFG_NAND_LEGACY #define CONFIG_MTD_NAND_ECC_JFFS2 #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h new file mode 100644 index 00000000000..8a6e5a61b73 --- /dev/null +++ b/include/configs/TB5200.h @@ -0,0 +1,507 @@ +/* + * (C) Copyright 2003-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2006 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ +#define CONFIG_TB5200 1 /* ... on a TB5200 base board */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* default console is on PSC1 */ +#define CONFIG_SERIAL_MULTI 1 /* support multiple consoles */ +#define CONFIG_PSC_CONSOLE2 6 /* second console is on PSC6 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* + * Video console + */ +#if 1 +#define CONFIG_VIDEO +#define CONFIG_VIDEO_SM501 +#define CONFIG_VIDEO_SM501_32BPP +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_CONSOLE_EXTRA_INFO +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_SPLASH_SCREEN +#define CFG_CONSOLE_IS_IN_ENV +#endif + +#ifdef CONFIG_VIDEO +#define ADD_BMP_CMD CFG_CMD_BMP +#else +#define ADD_BMP_CMD 0 +#endif + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* USB */ +#define CONFIG_USB_OHCI +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define CONFIG_USB_STORAGE + +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_I2C) + +#ifdef CONFIG_POST +#define CFG_CMD_POST_DIAG CFG_CMD_DIAG +/* preserve space for the post_word at end of on-chip SRAM */ +#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 +#else +#define CFG_CMD_POST_DIAG 0 +#endif + +/* IDE */ +#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2) + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + ADD_BMP_CMD | \ + ADD_IDE_CMD | \ + ADD_PCI_CMD | \ + ADD_USB_CMD | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_POST_DIAG | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SNTP | \ + CFG_CMD_BSP) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_TIMESTAMP /* display image timestamps */ + +#if (TEXT_BASE == 0xFC000000) /* Boot low */ +# define CFG_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#if defined(CONFIG_TQM5200_B) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "bootfile=/tftpboot/tqm5200/uImage\0" \ + "load=tftp 200000 ${u-boot}\0" \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ + "update=protect off FC000000 FC07FFFF;" \ + "erase FC000000 FC07FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC07FFFF\0" \ + "" +#else +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "bootfile=/tftpboot/tqm5200/uImage\0" \ + "load=tftp 200000 $(u-boot)\0" \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC05FFFF\0" \ + "" +#endif /* CONFIG_TQM5200_B */ + +#define CONFIG_BOOTCOMMAND "run net_nfs" + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +#if defined(CFG_IPBSPEED_133) +/* + * PCI Bus clocking configuration + * + * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if + * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't + * been tested with a IPB Bus Clock of 66 MHz. + */ +#define CFG_PCISPEED_66 /* define for 66MHz speed */ +#endif + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #2 */ + +/* + * I2C clock frequency + * + * Please notice, that the resulting clock frequency could differ from the + * configured value. This is because the I2C clock is derived from system + * clock over a frequency divider with only a few divider values. U-boot + * calculates the best approximation for CFG_I2C_SPEED. However the calculated + * approximation allways lies below the configured value, never above. + */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work + * also). For other EEPROMs configuration should be verified. On Mini-FAP the + * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the + * same configuration could be used. + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 + +/* List of I2C addresses to be verified by POST */ +#undef I2C_ADDR_LIST +#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ + CFG_I2C_RTC_ADDR, \ + CFG_I2C_SLAVE } + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */ + +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 + +#if !defined(CFG_LOWBOOT) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) +#else /* CFG_LOWBOOT */ +#if defined(CONFIG_TQM5200_B) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00080000) +#else +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +#endif /* CONFIG_TQM5200_B */ +#endif /* CFG_LOWBOOT */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ + +/* Dynamic MTD partition support */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=TQM5200-0" +#if defined(CONFIG_TQM5200_B) +#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \ + "1280k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "16m(big-fs)," \ + "8m(misc)" +#else +#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "16m(big-fs)," \ + "8m(misc)" +#endif /* CONFIG_TQM5200_B */ + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#if defined(CONFIG_TQM5200_B) +#define CFG_ENV_SECT_SIZE 0x40000 +#else +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif /* CONFIG_TQM5200_B */ + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#if defined(CONFIG_TQM5200_B) +#define CFG_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ +#else +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#endif /* CONFIG_TQM5200_B */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +/* + * Define CONFIG_FEC_10MBIT to force FEC at 10Mb + */ +/* #define CONFIG_FEC_10MBIT 1 */ +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration + * + * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): + * Bit 0 (mask: 0x80000000): 1 + * use ALT CAN position: Bits 2-3 (mask: 0x30000000): + * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. + * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. + * Use for REV200 STK52XX boards. Do not use with REV100 modules + * (because, there I2C1 is used as I2C bus) + * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 + * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) + * 000 -> All PSC2 pins are GIOPs + * 001 -> CAN1/2 on PSC2 pins + * Use for REV100 STK52xx boards + * use PSC3: Bits 20:23 (mask: 0x00000300): + * 0001 -> USB2 + * 0000 -> GPIO + * use PSC6: + * on STK52xx: + * use as UART. Pins PSC6_0 to PSC6_3 are used. + * Bits 9:11 (mask: 0x00700000): + * 101 -> PSC6 : Extended POST test is not available + * on MINI-FAP and TQM5200_IB: + * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): + * 000 -> PSC6 could not be used as UART, CODEC or IrDA + * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST + * tests. + */ +#define CFG_GPS_PORT_CONFIG 0x81500114 + +/* + * RTC configuration + */ +#define CONFIG_RTC_M41T11 1 +#define CFG_I2C_RTC_ADDR 0x68 +#define CFG_M41T11_BASE_YEAR 1900 /* because Linux uses the same base + year */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +/* Enable an alternate, more extensive memory test */ +#define CFG_ALT_MEMTEST + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE +#else +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#ifdef CFG_PCISPEED_66 +#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ +#else +#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ +#endif +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +#define CONFIG_LAST_STAGE_INIT + +/* + * SRAM - Do not map below 2 GB in address space, because this area is used + * for SDRAM autosizing. + */ +#define CFG_CS2_START 0xE5000000 +#define CFG_CS2_SIZE 0x100000 /* 1 MByte */ +#define CFG_CS2_CFG 0x0004D930 + +/* + * Grafic controller - Do not map below 2 GB in address space, because this + * area is used for SDRAM autosizing. + */ +#define SM501_FB_BASE 0xE0000000 +#define CFG_CS1_START (SM501_FB_BASE) +#define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ +#define CFG_CS1_CFG 0x8F48FF70 +#define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ + +#define CFG_RESET_ADDRESS 0xff000000 + +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00001000 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CONFIG_IDE_RESET /* reset for ide supported */ +#define CONFIG_IDE_PREINIT + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + +#endif /* __CONFIG_H */ diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 5ad19394817..be83b676720 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -2,7 +2,7 @@ * (C) Copyright 2003-2005 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * (C) Copyright 2004-2005 + * (C) Copyright 2004-2006 * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de * * See file CREDITS for list of people who contributed to this @@ -32,28 +32,30 @@ * (easy to change) */ -#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ -#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ -#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ -#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -#define CONFIG_STK52XX 1 /* ... on a STK52XX base board */ -#define CONFIG_STK52XX_REV100 1 /* define for revision 100 baseboards */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ +#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ -#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ +#ifndef CONFIG_CAM5200 /* On a Cameron board or ... */ +#define CONFIG_STK52XX 1 /* ... on a STK52XX board */ +#endif + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * Serial console configuration */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } #ifdef CONFIG_STK52XX @@ -83,7 +85,7 @@ #define CONFIG_PCI_IO_SIZE 0x01000000 #define CONFIG_NET_MULTI 1 -#define CONFIG_EEPRO100 +#define CONFIG_EEPRO100 1 #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1 #endif /* CONFIG_STK52XX */ @@ -97,7 +99,7 @@ /* * Video console */ -#if 1 +#ifndef CONFIG_TQM5200S /* No graphics controller on TQM5200S */ #define CONFIG_VIDEO #define CONFIG_VIDEO_SM501 #define CONFIG_VIDEO_SM501_32BPP @@ -130,10 +132,12 @@ #define ADD_USB_CMD 0 #endif +#ifndef CONFIG_CAM5200 /* POST support */ #define CONFIG_POST (CFG_POST_MEMORY | \ CFG_POST_CPU | \ CFG_POST_I2C) +#endif #ifdef CONFIG_POST #define CFG_CMD_POST_DIAG CFG_CMD_DIAG @@ -161,7 +165,6 @@ CFG_CMD_ASKENV | \ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ - CFG_CMD_ECHO | \ CFG_CMD_EEPROM | \ CFG_CMD_I2C | \ CFG_CMD_JFFS2 | \ @@ -178,8 +181,8 @@ #define CONFIG_TIMESTAMP /* display image timestamps */ -#if (TEXT_BASE == 0xFC000000) /* Boot low */ -# define CFG_LOWBOOT 1 +#if (TEXT_BASE != 0xFFF00000) +# define CFG_LOWBOOT 1 /* Boot low */ #endif /* @@ -188,20 +191,42 @@ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ "echo" #undef CONFIG_BOOTARGS -#if defined (CONFIG_TQM5200_AA) -# define CONFIG_U_BOOT_SUFFIX "-AA\0" -#elif defined (CONFIG_TQM5200_AB) -# define CONFIG_U_BOOT_SUFFIX "-AB\0" -#elif defined (CONFIG_TQM5200_AC) -# define CONFIG_U_BOOT_SUFFIX "-AC\0" +#ifdef CONFIG_STK52XX +# if defined(CONFIG_TQM5200_B) +# if defined(CFG_LOWBOOT) +# define ENV_UPDT \ + "update=protect off FC000000 FC07FFFF;" \ + "erase FC000000 FC07FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC07FFFF\0" +# else /* highboot */ +# define ENV_UPDT \ + "update=protect off FFF00000 FFF7FFFF;" \ + "erase FFF00000 FFF7FFFF;" \ + "cp.b 200000 FFF00000 ${filesize};" \ + "protect on FFF00000 FFF7FFFF\0" +# endif /* CFG_LOWBOOT */ +# else /* !CONFIG_TQM5200_B */ +# define ENV_UPDT \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC05FFFF\0" +# endif /* CONFIG_TQM5200_B */ +#elif defined (CONFIG_CAM5200) +# define ENV_UPDT \ + "update=protect off FC000000 FC03FFFF;" \ + "erase FC000000 FC03FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC03FFFF\0" #else -# define CONFIG_U_BOOT_SUFFIX "\0" -#endif +# error "Unknown Carrier Board" +#endif /* CONFIG_STK52XX */ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ @@ -212,18 +237,18 @@ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "flash_self=run ramargs addip;" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=ttyS0,${baudrate}\0" \ + "flash_self=run ramargs addip addcons;" \ "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs=run nfsargs addip;" \ + "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ + "bootm\0" \ "bootfile=/tftpboot/tqm5200/uImage\0" \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ "load=tftp 200000 ${u-boot}\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \ - "update=protect off FC000000 FC05FFFF;" \ - "erase FC000000 FC05FFFF;" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 FC05FFFF\0" \ + ENV_UPDT \ "" #define CONFIG_BOOTCOMMAND "run net_nfs" @@ -285,13 +310,6 @@ #endif /* List of I2C addresses to be verified by POST */ -#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB) -#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ - CFG_I2C_SLAVE } -#elif defined (CONFIG_TQM5200_AC) -#define I2C_ADDR_LIST { CFG_I2C_SLAVE } -#endif - #if defined (CONFIG_MINIFAP) #undef I2C_ADDR_LIST #define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ @@ -302,45 +320,80 @@ /* * Flash configuration */ -#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */ +#define CFG_FLASH_BASE 0xFC000000 -/* use CFI flash driver if no module variant is spezified */ +/* use CFI flash driver */ #define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ #define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ #define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } #define CFG_FLASH_EMPTY_INFO #define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ #define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ -#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 + +#if defined (CONFIG_CAM5200) +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00040000) +#elif defined(CONFIG_TQM5200_B) +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00080000) +#else +# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +#endif -#if !defined(CFG_LOWBOOT) -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) -#else /* CFG_LOWBOOT */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) -#endif /* CFG_LOWBOOT */ #define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks (= chip selects) */ -#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ /* Dynamic MTD partition support */ #define CONFIG_JFFS2_CMDLINE #define MTDIDS_DEFAULT "nor0=TQM5200-0" -#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + +#ifdef CONFIG_STK52XX +# if defined(CONFIG_TQM5200_B) +# if defined(CFG_LOWBOOT) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:1m(firmware)," \ + "1536k(kernel)," \ + "3584k(small-fs)," \ + "2m(initrd)," \ + "8m(misc)," \ + "16m(big-fs)" +# else /* highboot */ +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:2560k(kernel)," \ + "3584k(small-fs)," \ + "2m(initrd)," \ + "8m(misc)," \ + "15m(big-fs)," \ + "1m(firmware)" +# endif /* CFG_LOWBOOT */ +# else /* !CONFIG_TQM5200_B */ +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ "1408k(kernel)," \ "2m(initrd)," \ "4m(small-fs)," \ - "16m(big-fs)," \ - "8m(misc)" + "8m(misc)," \ + "16m(big-fs)" +# endif /* CONFIG_TQM5200_B */ +#elif defined (CONFIG_CAM5200) +# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:768k(firmware)," \ + "1792k(kernel)," \ + "3584k(small-fs)," \ + "2m(initrd)," \ + "8m(misc)," \ + "16m(big-fs)" +#else +# error "Unknown Carrier Board" +#endif /* CONFIG_STK52XX */ /* * Environment settings */ #define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */ +#if defined(CONFIG_TQM5200_B) +#define CFG_ENV_SECT_SIZE 0x40000 +#else #define CFG_ENV_SECT_SIZE 0x20000 +#endif /* CONFIG_TQM5200_B */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) /* * Memory map @@ -368,8 +421,15 @@ # define CFG_RAMBOOT 1 #endif -#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ -#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ +#if defined (CONFIG_CAM5200) +# define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#elif defined(CONFIG_TQM5200_B) +# define CFG_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ +#else +# define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#endif + +#define CFG_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* @@ -430,6 +490,8 @@ #if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100) # define CONFIG_RTC_M41T11 1 # define CFG_I2C_RTC_ADDR 0x68 +# define CFG_M41T11_BASE_YEAR 1900 /* because Linux uses the same base + year */ #else # define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ #endif @@ -439,6 +501,10 @@ */ #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#define CFG_PROMPT_HUSH_PS2 "> " + #if (CONFIG_COMMANDS & CFG_CMD_KGDB) #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else @@ -485,37 +551,25 @@ #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE -/* automatic configuration of chip selects */ -#ifdef CONFIG_CS_AUTOCONF #define CONFIG_LAST_STAGE_INIT -#endif /* * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF) #define CFG_CS2_START 0xE5000000 -#ifdef CONFIG_TQM5200_AB -#define CFG_CS2_SIZE 0x80000 /* 512 kByte */ -#else /* CONFIG_CS_AUTOCONF */ #define CFG_CS2_SIZE 0x100000 /* 1 MByte */ -#endif #define CFG_CS2_CFG 0x0004D930 -#endif /* * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ -#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \ - defined (CONFIG_CS_AUTOCONF) #define SM501_FB_BASE 0xE0000000 #define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ #define CFG_CS1_CFG 0x8F48FF70 #define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 -#endif #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 41f44c5a37c..cec7e3ece44 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -417,11 +417,58 @@ extern int tqm834x_num_flash_banks; HRCWH_TSEC2M_IN_GMII ) #endif +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 +#define CFG_SICRL SICRL_LDP_A + /* i-cache and d-cache disabled */ #define CFG_HID0_INIT 0x000000000 #define CFG_HID0_FINAL CFG_HID0_INIT #define CFG_HID2 0x000000000 +/* DDR 0 - 512M */ +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT1L (CFG_SDRAM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_SDRAM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +/* stack in DCACHE @ 512M (no backing mem) */ +#define CFG_IBAT2L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT2U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) + +/* PCI */ +#define CFG_IBAT3L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT3U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT4L (CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT4U (CFG_PCI1_MEM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_IBAT5L (CFG_PCI1_IO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT5U (CFG_PCI1_IO_BASE + 0x10000000 | BATU_BL_16M | BATU_VS | BATU_VP) + +/* IMMRBAR */ +#define CFG_IBAT6L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT6U (CFG_IMMRBAR | BATU_BL_1M | BATU_VS | BATU_VP) + +/* FLASH */ +#define CFG_IBAT7L (CFG_FLASH_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_IBAT7U (CFG_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U +#define CFG_DBAT4L CFG_IBAT4L +#define CFG_DBAT4U CFG_IBAT4U +#define CFG_DBAT5L CFG_IBAT5L +#define CFG_DBAT5U CFG_IBAT5U +#define CFG_DBAT6L CFG_IBAT6L +#define CFG_DBAT6U CFG_IBAT6U +#define CFG_DBAT7L CFG_IBAT7L +#define CFG_DBAT7U CFG_IBAT7U + /* * Internal Definitions * diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 18197f234dc..780f27433e6 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -158,7 +158,7 @@ #undef CONFIG_CONS_NONE /* define if console on something else */ #define CONFIG_CONS_INDEX 1 /* which serial channel for console */ -#else +#else /* ! TQM8560 */ #define CONFIG_CONS_INDEX 1 #undef CONFIG_SERIAL_SOFTWARE_FIFO @@ -170,6 +170,15 @@ #define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) #define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) +/* PS/2 Keyboard */ +#if !defined(CONFIG_TQM8560) +#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ +#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ +#define CONFIG_PS2SERIAL 2 /* .. on DUART2 */ +#define CONFIG_PS2MULT_DELAY (CFG_HZ/2) /* Initial delay */ +#define CONFIG_BOARD_EARLY_INIT_R 1 +#endif /* !CONFIG_TQM8560 */ + #endif /* CONFIG_TQM8560 */ #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h new file mode 100644 index 00000000000..ede4e3b9b34 --- /dev/null +++ b/include/configs/TQM885D.h @@ -0,0 +1,492 @@ +/* + * (C) Copyright 2000-2005 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2006 + * Martin Krause, TQ-Systems GmBH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC885 1 /* This is a MPC885 CPU */ +#define CONFIG_TQM885D 1 /* ...on a TQM88D module */ + +#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz - PLL input clock */ +#define CFG_8xx_CPUCLK_MIN 15000000 /* 15 MHz - CPU minimum clock */ +#define CFG_8xx_CPUCLK_MAX 133000000 /* 133 MHz - CPU maximum clock */ +#define CONFIG_8xx_CPUCLK_DEFAULT 66000000 /* 50 MHz - CPU default clock */ + /* (it will be used if there is no */ + /* 'cpuclk' variable with valid value) */ + +#define CFG_MEASURE_CPUCLK /* Measure real cpu clock */ + /* (function measure_gclk() */ + /* will be called) */ +#ifdef CFG_MEASURE_CPUCLK +#define CFG_8XX_XIN 10000000 /* measure_gclk() needs this */ +#endif + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ + +#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ + +#define CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_BOARD_TYPES 1 /* support board types */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/TQM866M/uImage\0" \ + "kernel_addr=40080000\0" \ + "ramdisk_addr=40180000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ + +#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ + +#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */ +#define CFG_I2C_SLAVE 0xFE + +#ifdef CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define PB_SCL 0x00000020 /* PB 26 */ +#define PB_SDA 0x00000010 /* PB 27 */ + +#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) +#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) +#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) +#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) +#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ + else immr->im_cpm.cp_pbdat &= ~PB_SDA +#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ + else immr->im_cpm.cp_pbdat &= ~PB_SCL +#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ +#endif /* CONFIG_SOFT_I2C */ + +#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C?? */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* two byte address */ +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ + +# define CONFIG_RTC_DS1337 1 +# define CFG_I2C_RTC_ADDR 0x68 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +#undef CONFIG_RTC_MPC8xx /* MPC866 does not support RTC */ + +#define CONFIG_TIMESTAMP /* but print image timestmps */ + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_IDE | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if 0 +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#endif +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0300000 /* 1 ... 3 MB in DRAM */ +#define CFG_ALT_MEMTEST /* alternate, more extensive + memory test.*/ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Enable loopw commando. This has only effect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFFF00000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x40000000 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * Hardware Information Block + */ +#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ +#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */ +#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#ifndef CONFIG_CAN_DRIVER +#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#else /* we must activate GPL5 in the SIUMCR for CAN */ +#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#endif /* CONFIG_CAN_DRIVER */ + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 +#define CFG_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00) + +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + * + */ +#define CFG_PCMCIA_MEM_ADDR (0xE0000000) +#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_DMA_ADDR (0xE4000000) +#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000) +#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_IO_ADDR (0xEC000000) +#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) + +/*----------------------------------------------------------------------- + * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) + *----------------------------------------------------------------------- + */ + +#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x0100 + +/*----------------------------------------------------------------------- + * + *----------------------------------------------------------------------- + * + */ +#define CFG_DER 0 + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ + +/* + * FLASH timing: Default value of OR0 after reset + */ +#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \ + OR_SCY_6_CLK | OR_TRLX) + +#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) + +#define CFG_OR1_REMAP CFG_OR0_REMAP +#define CFG_OR1_PRELIM CFG_OR0_PRELIM +#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V ) + +/* + * BR2/3 and OR2/3 (SDRAM) + * + */ +#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ +#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */ +#define SDRAM_MAX_SIZE (256 << 20) /* max 256 MB per bank */ + +/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ +#define CFG_OR_TIMING_SDRAM 0x00000A00 + +#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM ) +#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) + +#ifndef CONFIG_CAN_DRIVER +#define CFG_OR3_PRELIM CFG_OR2_PRELIM +#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) +#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */ +#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */ +#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */ +#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI) +#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \ + BR_PS_8 | BR_MS_UPMB | BR_V ) +#endif /* CONFIG_CAN_DRIVER */ + +/* + * 4096 Rows from SDRAM example configuration + * 1000 factor s -> ms + * 64 PTP (pre-divider from MPTPR) from SDRAM example configuration + * 4 Number of refresh cycles per period + * 64 Refresh cycle in ms per number of rows + */ +#define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64)) + +/* + * Memory Periodic Timer Prescaler + * Periodic timer for refresh, start with refresh rate for 40 MHz clock + * (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK) + */ +#define CFG_MAMR_PTA 39 + +/* + * For 16 MBit, refresh rates could be 31.3 us + * (= 64 ms / 2K = 125 / quad bursts). + * For a simpler initialization, 15.6 us is used instead. + * + * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks + * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank + */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ + +/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + +/* + * MAMR settings for SDRAM + */ + +/* 8 column SDRAM */ +#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) +/* 9 column SDRAM */ +#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) +/* 10 column SDRAM */ +#define CFG_MAMR_10COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Network configuration + */ +#define CONFIG_SCC2_ENET /* enable ethernet on SCC2 */ +#define CONFIG_FEC_ENET /* enable ethernet on FEC */ +#define CONFIG_ETHER_ON_FEC1 /* ... for FEC1 */ +#define CONFIG_ETHER_ON_FEC2 /* ... for FEC2 */ + +#if (CONFIG_COMMANDS & CFG_CMD_MII) +#define CFG_DISCOVER_PHY +#endif + +#define CONFIG_NET_RETRY_COUNT 1 /* reduce max. timeout before + switching to another netwok (if the + tried network is unreachable) */ + +#define CONFIG_ETHPRIME "SCC ETHERNET" + +#endif /* __CONFIG_H */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 3f29190e432..5f48a709381 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -248,6 +248,7 @@ */ #if (CONFIG_COMMANDS & CFG_CMD_NAND) +#define CFG_NAND_LEGACY #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 3ca137e53ac..96f3d26cc5e 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -141,6 +141,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index d92f81f78ee..faf855d2492 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -133,6 +133,8 @@ * NAND-FLASH stuff *----------------------------------------------------------------------- */ +#define CFG_NAND_LEGACY + #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h index f71e691b262..a5085cfb79d 100644 --- a/include/configs/ZPC1900.h +++ b/include/configs/ZPC1900.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2003-2004 Arabella Software Ltd. + * Copyright (C) 2003-2005 Arabella Software Ltd. * Yuli Barcohen <yuli@arabellasw.com> * * U-Boot configuration for Zephyr Engineering ZPC.1900 board. @@ -32,11 +32,7 @@ #define CPU_ID_STR "MPC8265" #define CONFIG_CPM2 1 /* Has a CPM2 */ -#undef DEBUG - -#undef CONFIG_BOARD_EARLY_INIT_F /* Don't call board_early_init_f */ - -/* Allow serial number (serial) and MAC address (ethaddr) to be overwritten */ +/* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */ #define CONFIG_ENV_OVERWRITE /* @@ -113,7 +109,6 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ | CFG_CMD_DHCP \ - | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_MII \ | CFG_CMD_PING \ @@ -154,31 +149,30 @@ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ +#define CFG_MEMTEST_END 0x03800000 /* 1 ... 56 MB in DRAM */ -#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_LOAD_ADDR 0x400000 /* default load address */ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#define CFG_FLASH_BASE 0xFFE00000 -#define CFG_FLASH_CFI -#define CFG_FLASH_CFI_DRIVER -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */ - -#define CFG_DEFAULT_IMMR 0x0F010000 - -#define CFG_IMMR 0xF0000000 #define CFG_SDRAM_BASE 0x00000000 #define CFG_SDRAM_SIZE 64 -#define CFG_FLSIMM_BASE 0xFC000000 -#define CFG_LSDRAM_BASE 0xFE000000 + +#define CFG_IMMR 0xF0000000 +#define CFG_LSDRAM_BASE 0xFC000000 +#define CFG_FLASH_BASE 0xFE000000 #define CFG_BCSR 0xFEA00000 #define CFG_EEPROM 0xFEB00000 +#define CFG_FLSIMM_BASE 0xFF000000 -#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks */ +#define CFG_MAX_FLASH_SECT 32 /* max num of sects on one chip */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLSIMM_BASE } #define BCSR_PCI_MODE 0x01 @@ -190,10 +184,10 @@ /* Hard reset configuration word */ #define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01| HRCW_CIP |\ - HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB010 |\ - HRCW_BMS | HRCW_LBPC01 | HRCW_APPC10 |\ - HRCW_MODCK_H0101 \ - ) /* 0x16828605 */ + HRCW_L2CPC10 | HRCW_DPPC00 | HRCW_ISB100 |\ + HRCW_BMS | HRCW_LBPC00 | HRCW_APPC10 |\ + HRCW_MODCK_H0111 \ + ) /* 0x16848207 */ /* No slaves */ #define CFG_HRCW_SLAVE1 0 #define CFG_HRCW_SLAVE2 0 @@ -211,7 +205,7 @@ #define CFG_RAMBOOT #endif -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ @@ -233,14 +227,14 @@ # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif -#define CFG_HID0_INIT 0 -#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE ) +#define CFG_HID0_INIT (HID0_ICFI) +#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE) #define CFG_HID2 0 #define CFG_SIUMCR 0x42200000 #define CFG_SYPCR 0xFFFFFFC3 -#define CFG_BCR 0x90400000 +#define CFG_BCR 0x90000000 #define CFG_SCCR SCCR_DFBRG01 #define CFG_RMR RMR_CSRE @@ -248,18 +242,23 @@ #define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) #define CFG_RCCR 0 -#define CFG_PSDMR 0x014EB45A -#define CFG_PSRT 0x0C -#define CFG_LSDMR 0x008AB552 -#define CFG_LSRT 0x0E +#define CFG_PSDMR /* 0x834DA43B */0x014DA43A +#define CFG_PSRT 0x0F/* 0x0C */ +#define CFG_LSDMR 0x0085A562 +#define CFG_LSRT 0x0F #define CFG_MPTPR 0x4000 +#define CFG_PSDRAM_BR CFG_SDRAM_BASE | 0x00000041 +#define CFG_PSDRAM_OR 0xFC0028C0 +#define CFG_LSDRAM_BR CFG_LSDRAM_BASE | 0x00001861 +#define CFG_LSDRAM_OR 0xFF803480 + #define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00000801 #define CFG_OR0_PRELIM 0xFFE00856 #define CFG_BR5_PRELIM CFG_EEPROM | 0x00000801 #define CFG_OR5_PRELIM 0xFFFF03F6 -#define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00000801 -#define CFG_OR6_PRELIM 0xFE000856 +#define CFG_BR6_PRELIM CFG_FLSIMM_BASE | 0x00001801 +#define CFG_OR6_PRELIM 0xFF000856 #define CFG_BR7_PRELIM CFG_BCSR | 0x00000801 #define CFG_OR7_PRELIM 0xFFFF83F6 diff --git a/include/configs/aev.h b/include/configs/aev.h index aa6bc91b20f..8d9f0a16610 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2003-2005 + * (C) Copyright 2003-2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * (C) Copyright 2004-2005 @@ -370,10 +370,7 @@ #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE -/* automatic configuration of chip selects */ -#ifdef CONFIG_CS_AUTOCONF #define CONFIG_LAST_STAGE_INIT -#endif /* * SRAM - Do not map below 2 GB in address space, because this area is used diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index eacc74446ce..2c1c31927c1 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -43,12 +43,13 @@ * 2nd ethernet port you have to "undef" the following define. */ #define CONFIG_BAMBOO_NAND 1 /* enable nand flash support */ +#define CFG_NAND_LEGACY /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) *----------------------------------------------------------------------*/ -#define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ #define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ @@ -256,8 +257,8 @@ "kernel_addr=fff00000\0" \ "ramdisk_addr=fff10000\0" \ "load=tftp 100000 /tftpboot/bamboo/u-boot.bin\0" \ - "update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \ - "cp.b 100000 fff80000 80000;" \ + "update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;" \ + "cp.b 100000 fffa0000 60000;" \ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ "" @@ -357,6 +358,14 @@ #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING + +#ifdef CONFIG_CMDLINE_EDITING +#undef CONFIG_AUTO_COMPLETE +#else +#define CONFIG_AUTO_COMPLETE +#endif + /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h index 46280f7e325..572a70f1200 100644 --- a/include/configs/cmc_pu2.h +++ b/include/configs/cmc_pu2.h @@ -108,7 +108,7 @@ /* still about 20 kB free with this defined */ #define CFG_LONGHELP -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 1 #ifdef CONFIG_HARD_I2C #define CONFIG_COMMANDS \ @@ -206,15 +206,6 @@ struct bd_info_ext { #error CONFIG_USE_IRQ not supported #endif -#define CFG_DEVICE_NULLDEV 1 /* enble null device */ -#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ - -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" -#define CONFIG_AUTOBOOT_STOP_STR "R" /* default password */ - -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \ "addmtd;bootm\0" \ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 0a10e3c75b4..4cc5085293b 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -81,8 +81,7 @@ CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \ CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C)) #else /* CONFIG_DBAU1550 */ -/* Boot from Compact flash partition 2 as default */ -#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;bootm" +#define CONFIG_BOOTCOMMAND "bootp;bootm" #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \ ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ @@ -133,8 +132,6 @@ #define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */ -#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} - #else /* CONFIG_DBAU1550 */ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ @@ -145,6 +142,8 @@ #endif /* CONFIG_DBAU1550 */ +#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} + #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 diff --git a/include/configs/delta.h b/include/configs/delta.h new file mode 100644 index 00000000000..91284fdace8 --- /dev/null +++ b/include/configs/delta.h @@ -0,0 +1,242 @@ +/* + * Configuation settings for the Delta board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_CPU_MONAHANS 1 /* Intel Monahan CPU */ +#define CONFIG_DELTA 1 /* Delta board */ + +/* #define CONFIG_LCD 1 */ +#ifdef CONFIG_LCD +#define CONFIG_SHARP_LM8V31 +#endif +/* #define CONFIG_MMC 1 */ +#define BOARD_LATE_INIT 1 + +#undef CONFIG_SKIP_RELOCATE_UBOOT +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 256*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ +#undef TURN_ON_ETHERNET +#ifdef TURN_ON_ETHERNET +# define CONFIG_DRIVER_SMC91111 1 +# define CONFIG_SMC91111_BASE 0x14000300 +# define CONFIG_SMC91111_EXT_PHY +# define CONFIG_SMC_USE_32_BIT +# undef CONFIG_SMC_USE_IOFUNCS /* just for use with the kernel */ +#endif + +#define CONFIG_HARD_I2C 1 /* required for DA9030 access */ +#define CFG_I2C_SPEED 400000 /* I2C speed */ +#define CFG_I2C_SLAVE 1 /* I2C controllers address */ +#define DA9030_I2C_ADDR 0x49 /* I2C address of DA9030 */ +#define CFG_DA9030_EXTON_DELAY 100000 /* wait x us after DA9030 reset via EXTON */ +#define CFG_I2C_INIT_BOARD 1 +/* #define CONFIG_HW_WATCHDOG 1 /\* Required for hitting the DA9030 WD *\/ */ + +#define DELTA_CHECK_KEYBD 1 /* check for keys pressed during boot */ +#define CONFIG_PREBOOT "\0" + +#ifdef DELTA_CHECK_KEYBD +# define KEYBD_DATALEN 4 /* we have four keys */ +# define KEYBD_KP_DKIN0 0x1 /* vol+ */ +# define KEYBD_KP_DKIN1 0x2 /* vol- */ +# define KEYBD_KP_DKIN2 0x3 /* multi */ +# define KEYBD_KP_DKIN5 0x4 /* SWKEY_GN */ +#endif /* DELTA_CHECK_KEYBD */ + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +/* #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT) */ +#ifdef TURN_ON_ETHERNET +# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) +#else +# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_ENV \ + | CFG_CMD_NAND \ + | CFG_CMD_I2C) \ + & ~(CFG_CMD_NET \ + | CFG_CMD_FLASH \ + | CFG_CMD_IMLS)) +#endif + + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_IPADDR 192.168.0.21 +#define CONFIG_SERVERIP 192.168.0.250 +#define CONFIG_BOOTCOMMAND "bootm 80000" +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" +#define CONFIG_CMDLINE_TAG +#define CONFIG_TIMESTAMP + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0x80400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x80800000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (CFG_DRAM_BASE + 0x8000) /* default load address */ + +#define CFG_HZ 3250000 /* incrementer freq: 3.25 MHz */ + +/* Monahans Core Frequency */ +#define CFG_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */ +#define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */ + + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* #define CFG_MMC_BASE 0xF0000000 */ + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0x80000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x1000000 /* 64 MB */ +#define PHYS_SDRAM_2 0x81000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x1000000 /* 64 MB */ +#define PHYS_SDRAM_3 0x82000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x1000000 /* 64 MB */ +#define PHYS_SDRAM_4 0x83000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x1000000 /* 64 MB */ + +#define CFG_DRAM_BASE 0x80000000 /* at CS0 */ +#define CFG_DRAM_SIZE 0x04000000 /* 64 MB Ram */ + +#undef CFG_SKIP_DRAM_SCRUB + +/* + * NAND Flash + */ +/* Use the new NAND code. (BOARDLIBS = drivers/nand/libnand.a required) */ +#undef CFG_NAND_LEGACY + +#define CFG_NAND0_BASE 0x0 /* 0x43100040 */ /* 0x10000000 */ +#undef CFG_NAND1_BASE + +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE } +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ + +/* nand timeout values */ +#define CFG_NAND_PROG_ERASE_TO 3000 +#define CFG_NAND_OTHER_TO 100 +#define CFG_NAND_SENDCMD_RETRY 3 +#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ + +/* NAND Timing Parameters (in ns) */ +#define NAND_TIMING_tCH 10 +#define NAND_TIMING_tCS 0 +#define NAND_TIMING_tWH 20 +#define NAND_TIMING_tWP 40 + +#define NAND_TIMING_tRH 20 +#define NAND_TIMING_tRP 40 + +#define NAND_TIMING_tR 11123 +#define NAND_TIMING_tWHR 100 +#define NAND_TIMING_tAR 10 + +/* NAND debugging */ +#define CFG_DFC_DEBUG1 /* usefull */ +#undef CFG_DFC_DEBUG2 /* noisy */ +#undef CFG_DFC_DEBUG3 /* extremly noisy */ + +#define CONFIG_MTD_DEBUG +#define CONFIG_MTD_DEBUG_VERBOSE 1 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define CFG_NO_FLASH 1 + +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x40000 +#define CFG_ENV_OFFSET_REDUND 0x44000 +#define CFG_ENV_SIZE 0x4000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/ezkit533.h b/include/configs/ezkit533.h new file mode 100644 index 00000000000..5eda6732ca7 --- /dev/null +++ b/include/configs/ezkit533.h @@ -0,0 +1,188 @@ +#ifndef __CONFIG_EZKIT533_H__ +#define __CONFIG_EZKIT533_H__ + +#define CFG_LONGHELP 1 +#define CONFIG_BAUDRATE 57600 +#define CONFIG_STAMP 1 +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20310300 +#if 0 +#define CONFIG_MII +#define CFG_DISCOVER_PHY +#endif + +#define CONFIG_RTC_BF533 1 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 27000000 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 22 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#define CONFIG_MEM_SIZE 32 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC16M16A2TG_75 1 + +#define CONFIG_LOADS_ECHO 1 + + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DATE) +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off" + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x01F00000 /* 1 ... 31 MB in DRAM */ +#define CFG_LOAD_ADDR 0x01000000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE 0x02000000 +#define CFG_FLASH_BASE 0x20000000 + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_FLASH0_BASE 0x20000000 +#define CFG_FLASH1_BASE 0x20200000 +#define CFG_FLASH2_BASE 0x20280000 +#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 40 /* max number of sectors on one chip */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#define POLL_MODE 1 +#define FLASH_TOT_SECT 40 +#define FLASH_SIZE 0x220000 +#define CFG_FLASH_SIZE 0x220000 + +/* + * Initialize PSD4256 registers for using I2C + */ +#define CONFIG_MISC_INIT_R + +/* + * I2C settings + * By default PF1 is used as SDA and PF0 as SCL on the Stamp board + */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF0 +#define PF_SDA PF1 + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE + + +#define __ADSPLPBLACKFIN__ 1 +#define __ADSPBF533__ 1 + +/* 0xFF, 0x7BB07BB0, 0x22547BB0 */ +/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ + ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) +#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ + B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) +*/ +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0x7BB07BB0 +#define AMBCTL1VAL 0xFFC27BB0 + +#define CONFIG_VDSP 1 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif diff --git a/include/configs/gth2.h b/include/configs/gth2.h new file mode 100644 index 00000000000..a49ed3bae3e --- /dev/null +++ b/include/configs/gth2.h @@ -0,0 +1,195 @@ +/* + * (C) Copyright 2005 + * Thomas.Lange@corelatus.se + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file contains the configuration parameters for the gth2 board. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MIPS32 1 /* MIPS32 CPU core */ +#define CONFIG_GTH2 1 +#define CONFIG_AU1X00 1 /* alchemy series cpu */ + +#define CONFIG_AU1000 1 + +#define CONFIG_MISC_INIT_R 1 + +#define CONFIG_ETHADDR DE:AD:BE:EF:01:02 /* Ethernet address */ + +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ + +#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */ + +#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */ + +#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */ + +#define CONFIG_BAUDRATE 115200 + +/* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 115200 } + +/* Only interrupt boot if space is pressed */ +/* If a long serial cable is connected but */ +/* other end is dead, garbage will be read */ +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT "Press space to abort autoboot in %d second\n" +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +#define CONFIG_BOOTARGS "panic=1" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "addmisc=setenv bootargs $(bootargs) " \ + "ethaddr=$(ethaddr) \0" \ + "netboot=bootp;run addmisc;bootm\0" \ + "" + +/* Boot from Compact flash partition 2 as default */ +#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;run addmisc;bootm" + +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \ + ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ + CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_LOADB | CFG_CMD_ELF | \ + CFG_CMD_BDI | CFG_CMD_BEDBUG | CFG_CMD_NFS | CFG_CMD_AUTOSCRIPT )) + +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "GTH2 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args*/ + +#define CFG_MALLOC_LEN 128*1024 + +#define CFG_BOOTPARAMS_LEN 128*1024 + +#define CFG_MHZ 500 + +#define CFG_HZ (CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */ + +#define CFG_SDRAM_BASE 0x80000000 /* Cached addr */ + +#define CFG_LOAD_ADDR 0x81000000 /* default load address */ + +#define CFG_MEMTEST_START 0x80100000 +#define CFG_MEMTEST_END 0x83000000 + +#define CONFIG_HW_WATCHDOG 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ + +#define PHYS_FLASH 0xbfc00000 /* Flash Bank #1 */ + +/* The following #defines are needed to get flash environment right */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (192 << 10) + +#define CFG_INIT_SP_OFFSET 0x400000 + +/* We boot from this flash, selected with dip switch */ +#define CFG_FLASH_BASE PHYS_FLASH + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_IS_NOWHERE 1 + +/* Address and size of Primary Environment Sector */ +#define CFG_ENV_ADDR 0xB0030000 +#define CFG_ENV_SIZE 0x10000 + +#define CONFIG_FLASH_16BIT + +#define CONFIG_NR_DRAM_BANKS 2 + +#define CONFIG_NET_MULTI + +#define CONFIG_MEMSIZE_IN_BYTES + +/*---ATA PCMCIA ------------------------------------*/ +#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */ + +#define CFG_PCMCIA_MEM_ADDR 0x20000000 +#define CFG_PCMCIA_IO_BASE 0x28000000 +#define CFG_PCMCIA_ATTR_BASE 0x30000000 + +#define CONFIG_PCMCIA_SLOT_A + +#define CONFIG_ATAPI 1 +#define CONFIG_MAC_PARTITION 1 + +/* We run CF in "true ide" mode or a harddrive via pcmcia */ +#define CONFIG_IDE_PCMCIA 1 + +/* We only support one slot for now */ +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CFG_ATA_IDE0_OFFSET 0 + +#define CFG_ATA_BASE_ADDR CFG_PCMCIA_IO_BASE + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET 0 + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET 0 + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x0200 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 16384 +#define CFG_ICACHE_SIZE 16384 +#define CFG_CACHELINE_SIZE 32 + +#define GPIO_CACONFIG (1<<0) +#define GPIO_DPACONFIG (1<<6) +#define GPIO_ERESET (1<<11) +#define GPIO_EEDQ (1<<17) +#define GPIO_WDI (1<<18) +#define GPIO_RJ1LY (1<<22) +#define GPIO_RJ1LG (1<<23) +#define GPIO_LEDCLK (1<<29) +#define GPIO_LEDD (1<<30) +#define GPIO_CPU_LED (1<<31) + +#endif /* __CONFIG_H */ diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 6c080437ffa..4f83b1945d3 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -305,7 +305,6 @@ CFG_CMD_BEDBUG | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_REGINFO | \ CFG_CMD_IMMAP | \ CFG_CMD_MII) diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index c0cc4f1fbec..773d5d2c1d9 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -101,7 +101,7 @@ /* * Autobooting */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 1 /* autoboot after 1 second */ #define CONFIG_PREBOOT "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ @@ -109,6 +109,16 @@ #undef CONFIG_BOOTARGS +#define CONFIG_ETHADDR 00:a0:a4:03:00:00 +#define CONFIG_OVERWRITE_ETHADDR_ONCE + +#define CONFIG_IPADDR 192.168.100.2 +#define CONFIG_SERVERIP 192.168.100.1 +#define CONFIG_NETMASK 255.255.255.0 +#define HOSTNAME inka4x0 +#define CONFIG_BOOTFILE /tftpboot/inka4x0/uImage +#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx + #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ @@ -117,13 +127,22 @@ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ + "addcons=setenv bootargs ${bootargs} " \ + "console=ttyS0,${baudrate}\0" \ + "flash_nfs=run nfsargs addip addcons;" \ "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_82xx\0" \ + "net_nfs=tftp 200000 ${bootfile};" \ + "run nfsargs addip addcons;bootm\0" \ + "enable_disp=mw.l 100000 04000000 1;" \ + "cp.l 100000 f0000b20 1;" \ + "cp.l 100000 f0000b28 1\0" \ + "ideargs=setenv bootargs root=/dev/hda1 rw\0" \ + "ide_boot=ext2load ide 0:1 200000 uImage;" \ + "run ideargs addip addcons enable_disp;bootm" \ + "brightness=255\0" \ "" -#define CONFIG_BOOTCOMMAND "run net_nfs" +#define CONFIG_BOOTCOMMAND "run ide_boot" /* * IPB Bus clocking configuration. @@ -193,6 +212,7 @@ */ /* #define CONFIG_FEC_10MBIT 1 */ #define CONFIG_PHY_ADDR 0x00 +#define CONFIG_MII /* * GPIO configuration diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h index b0a80a3ea23..9f9fdb25e2c 100644 --- a/include/configs/ixdp425.h +++ b/include/configs/ixdp425.h @@ -33,6 +33,9 @@ #define CONFIG_IXP425 1 /* This is an IXP425 CPU */ #define CONFIG_IXDP425 1 /* on an IXDP425 Board */ +#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ +#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ + /*************************************************************** * U-boot generic defines start here. ***************************************************************/ @@ -135,6 +138,8 @@ #define CFG_DRAM_SIZE 0x01000000 #define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ /* * Expansion bus settings @@ -155,16 +160,27 @@ /* * FLASH and environment organization */ +/* + * FLASH and environment organization + */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1 } + +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ -/* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -/* FIXME */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */ -#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ #endif /* __CONFIG_H */ diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h new file mode 100644 index 00000000000..af4ecf621a3 --- /dev/null +++ b/include/configs/ixdpg425.h @@ -0,0 +1,240 @@ +/* + * (C) Copyright 2005-2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2003 + * Martijn de Gouw, Prodrive B.V., martijn.de.gouw@prodrive.nl + * + * Configuation settings for the IXDPG425 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_IXP425 1 /* This is an IXP425 CPU */ +#define CONFIG_IXDPG425 1 /* on an IXDPG425 Board */ + +#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ +#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ + +/* + * Ethernet + */ +#define CONFIG_IXP4XX_NPE 1 /* include IXP4xx NPE support */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_PHY_ADDR 5 /* NPE0 PHY address */ +#define CONFIG_HAS_ETH1 +#define CONFIG_PHY1_ADDR 4 /* NPE1 PHY address */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ + +/* + * Misc configuration options + */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +#define CONFIG_USE_IRQ 1 /* we need IRQ stuff for timer */ + +#define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */ +#define CFG_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 +#define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_DHCP | \ + CFG_CMD_ELF | \ + CFG_CMD_NET | \ + CFG_CMD_MII | \ + CFG_CMD_PING) + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +/* These are u-boot generic parameters */ +#include <cmd_confdefs.h> + +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ +#define CFG_LOAD_ADDR 0x00010000 /* default load address */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*************************************************************** + * Platform/Board specific defines start here. + ***************************************************************/ + +/*----------------------------------------------------------------------- + * Default configuration (environment varibles...) + *----------------------------------------------------------------------*/ +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=ixdpg425\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/arm\0" \ + "bootfile=/tftpboot/ixdpg425/uImage\0" \ + "kernel_addr=50080000\0" \ + "ramdisk_addr=50200000\0" \ + "load=tftp 100000 /tftpboot/ixdpg425/u-boot.bin\0" \ + "update=protect off 50000000 5003ffff;era 50000000 5003ffff;" \ + "cp.b 100000 50000000 40000;" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run net_nfs" + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ +#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */ +#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ + +#define CFG_DRAM_BASE 0x00000000 +#define CFG_DRAM_SIZE 0x01000000 + +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ + +/* + * Expansion bus settings + */ +#define CFG_EXP_CS0 0xbcd23c42 + +/* + * SDRAM settings + */ +#define CFG_SDR_CONFIG 0x18 +#define CFG_SDR_MODE_CONFIG 0x1 +#define CFG_SDRAM_REFRESH_CNT 0x81a + +/* + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* hardware flash protection */ + +#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1 } + +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * GPIO settings + */ +#define CFG_GPIO_PCI_INTA_N 6 +#define CFG_GPIO_PCI_INTB_N 7 +#define CFG_GPIO_SWITCH_RESET_N 8 +#define CFG_GPIO_SLIC_RESET_N 13 +#define CFG_GPIO_PCI_CLK 14 +#define CFG_GPIO_EXTBUS_CLK 15 + +/* + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 + +#endif /* __CONFIG_H */ diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h new file mode 100644 index 00000000000..61cf70576d7 --- /dev/null +++ b/include/configs/kvme080.h @@ -0,0 +1,262 @@ +/* + * (C) Copyright 2005 + * Sangmoon Kim, dogoil@etinsys.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MPC824X 1 +#define CONFIG_MPC8245 1 +#define CONFIG_KVME080 1 + +#define CONFIG_CONS_INDEX 1 + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_IPADDR 192.168.0.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.0.1 + +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 " \ + "root=/dev/nfs rw nfsroot=192.168.0.1:/opt/eldk/ppc_82xx " \ + "ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:" \ + "kvme080:eth0:none " \ + "mtdparts=phys_mapped_flash:12m(root),-(kernel)" + +#define CONFIG_BOOTCOMMAND \ + "tftp 800000 kvme080/uImage; " \ + "bootm 800000" + +#define CONFIG_LOADADDR 800000 + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R + +#define CONFIG_LOADS_ECHO 1 +#undef CFG_LOADS_BAUD_CHANGE + +#undef CONFIG_WATCHDOG + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +#define CONFIG_RTC_DS164x + +#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_CACHE | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_SDRAM | \ + CFG_CMD_SNTP) + +#define CONFIG_NETCONSOLE + +#include <cmd_confdefs.h> + +#define CFG_LONGHELP +#define CFG_PROMPT "=> " +#define CFG_CBSIZE 256 +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 +#define CFG_BARGSIZE CFG_CBSIZE + +#define CFG_MEMTEST_START 0x00400000 +#define CFG_MEMTEST_END 0x07C00000 + +#define CFG_LOAD_ADDR 0x00100000 +#define CFG_HZ 1000 + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_INIT_RAM_ADDR 0x40000000 +#define CFG_INIT_RAM_END 0x1000 +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x7C000000 +#define CFG_EUMB_ADDR 0xFC000000 +#define CFG_NVRAM_BASE_ADDR 0xFF000000 +#define CFG_NS16550_COM1 0xFF080000 +#define CFG_NS16550_COM2 0xFF080010 +#define CFG_NS16550_COM3 0xFF080020 +#define CFG_NS16550_COM4 0xFF080030 +#define CFG_RESET_ADDRESS 0xFFF00100 + +#define CFG_MAX_RAM_SIZE 0x20000000 +#define CFG_FLASH_SIZE (16 * 1024 * 1024) +#define CFG_NVRAM_SIZE 0x7FFF8 + +#define CONFIG_VERY_BIG_RAM + +#define CFG_MONITOR_LEN 0x00040000 +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_LEN (512 << 10) + +#define CFG_BOOTMAPSZ (8 << 20) + +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_USE_BUFFER_WRITE +#define CFG_FLASH_PROTECTION +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_PROTECT_CLEAR + +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 256 + +#define CFG_FLASH_ERASE_TOUT 120000 +#define CFG_FLASH_WRITE_TOUT 500 + +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 + +#define CFG_ENV_IS_IN_NVRAM 1 +#define CONFIG_ENV_OVERWRITE 1 +#define CFG_NVRAM_ACCESS_ROUTINE +#define CFG_ENV_ADDR CFG_NVRAM_BASE_ADDR +#define CFG_ENV_SIZE 0x400 +#define CFG_ENV_OFFSET 0 + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE 1 +#define CFG_NS16550_CLK 14745600 + +#define CONFIG_PCI +#define CONFIG_PCI_PNP + +#define CONFIG_NET_MULTI +#define CONFIG_EEPRO100 +#define CONFIG_EEPRO100_SROM_WRITE + +#define CFG_RX_ETH_BUFFER 8 + +#define CONFIG_HARD_I2C 1 +#define CFG_I2C_SPEED 400000 +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_EEPROM_ADDR 0x57 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CONFIG_SYS_CLK_FREQ 33333333 + +#define CFG_CACHELINE_SIZE 32 +#if CONFIG_COMMANDS & CFG_CMD_KGDB +# define CFG_CACHELINE_SHIFT 5 +#endif + +#define CFG_DLL_EXTEND 0x00 +#define CFG_PCI_HOLD_DEL 0x20 + +#define CFG_ROMNAL 15 +#define CFG_ROMFAL 31 + +#define CFG_REFINT 430 + +#define CFG_DBUS_SIZE2 1 + +#define CFG_BSTOPRE 121 +#define CFG_REFREC 8 +#define CFG_RDLAT 4 +#define CFG_PRETOACT 3 +#define CFG_ACTTOPRE 5 +#define CFG_ACTORW 3 +#define CFG_SDMODE_CAS_LAT 3 +#define CFG_SDMODE_WRAP 0 + +#define CFG_REGISTERD_TYPE_BUFFER 1 +#define CFG_EXTROM 1 +#define CFG_REGDIMM 0 + +#define CFG_BANK0_START 0x00000000 +#define CFG_BANK0_END (0x4000000 - 1) +#define CFG_BANK0_ENABLE 1 +#define CFG_BANK1_START 0x04000000 +#define CFG_BANK1_END (0x8000000 - 1) +#define CFG_BANK1_ENABLE 1 +#define CFG_BANK2_START 0x3ff00000 +#define CFG_BANK2_END 0x3fffffff +#define CFG_BANK2_ENABLE 0 +#define CFG_BANK3_START 0x3ff00000 +#define CFG_BANK3_END 0x3fffffff +#define CFG_BANK3_ENABLE 0 +#define CFG_BANK4_START 0x00000000 +#define CFG_BANK4_END 0x00000000 +#define CFG_BANK4_ENABLE 0 +#define CFG_BANK5_START 0x00000000 +#define CFG_BANK5_END 0x00000000 +#define CFG_BANK5_ENABLE 0 +#define CFG_BANK6_START 0x00000000 +#define CFG_BANK6_END 0x00000000 +#define CFG_BANK6_ENABLE 0 +#define CFG_BANK7_START 0x00000000 +#define CFG_BANK7_END 0x00000000 +#define CFG_BANK7_ENABLE 0 + +#define CFG_BANK_ENABLE 0x03 + +#define CFG_ODCR 0x75 +#define CFG_PGMAX 0x32 + +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT1L (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT1U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) + +#define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) +#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U +#define CFG_DBAT1L CFG_IBAT1L +#define CFG_DBAT1U CFG_IBAT1U +#define CFG_DBAT2L CFG_IBAT2L +#define CFG_DBAT2U CFG_IBAT2U +#define CFG_DBAT3L CFG_IBAT3L +#define CFG_DBAT3U CFG_IBAT3U + +#define BOOTFLAG_COLD 0x01 +#define BOOTFLAG_WARM 0x02 + +#endif /* __CONFIG_H */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h new file mode 100644 index 00000000000..ce33b85c96d --- /dev/null +++ b/include/configs/mcc200.h @@ -0,0 +1,333 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5200 +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MCC200 1 /* ... on MCC200 board */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ + +#define CONFIG_MISC_INIT_R + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + * + * To select console on the one of 8 external UARTs, + * define CONFIG_QUART_CONSOLE as 1, 2, 3, or 4 for the first Quad UART, + * or as 5, 6, 7, or 8 for the second Quad UART. + * + * CONFIG_PSC_CONSOLE must be undefined in this case. + */ +/* #define CONFIG_QUART_CONSOLE 1 */ /* console is on UART1 of QUART1 */ +/* + * To select console on PSC1, define CONFIG_PSC_CONSOLE as 1 + * and undefine CONFIG_QUART_CONSOLE. + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) +#error "Select only one console device!" +#endif +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +#define CONFIG_MII 1 + +#define CONFIG_DOS_PARTITION + +/* USB */ +#define CONFIG_USB_OHCI +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define CONFIG_USB_STORAGE + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + ADD_USB_CMD | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=mcc200\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "bootfile=/tftpboot/mcc200/uImage\0" \ + "baudrate=115200\0" \ + "load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0" \ + "update=protect off FFF00000 +${filesize};" \ + "era FFF00000 +${filesize};" \ + "cp.b 200000 FFF00000 ${filesize}\0" \ + "serverip=192.168.1.1\0" \ + "ipaddr=192.168.133.144\0" \ + "netmask=255.255.0.0\0" \ + "unlock=yes\0" \ + "ethaddr=00:02:44:7D:73:3B\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#define CFG_PROMPT_HUSH_PS2 "> " + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 1 /* Select I2C module #1 or #2 */ + +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * Flash configuration (8,16 or 32 MB) + * TEXT base always at 0xFFF00000 + * ENV_ADDR always at 0xFFF40000 + * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!) + * 0xFE000000 for 32 MB + * 0xFF000000 for 16 MB + * 0xFF800000 for 8 MB + */ +#define CFG_FLASH_BASE 0xfc000000 +#define CFG_FLASH_SIZE 0x04000000 + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* hardware flash protection */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */ + +#if TEXT_BASE == CFG_FLASH_BASE +#define CFG_LOWBOOT 1 +#endif + +/* + * Memory map + */ +#define CFG_MBAR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +/* + * Define CONFIG_FEC_10MBIT to force FEC at 10Mb + */ +/* #define CONFIG_FEC_10MBIT 1 */ +#define CONFIG_PHY_ADDR 1 + +/* + * GPIO configuration + */ +/* 0x10000004 = 32MB SDRAM */ +/* 0x90000004 = 64MB SDRAM */ +#define CFG_GPS_PORT_CONFIG 0x00000004 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x0004fb00 +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* Quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */ +#define CFG_CS2_START 0x80000000 +#define CFG_CS2_SIZE 0x00001000 +#define CFG_CS2_CFG 0x1d300 + +/* Second Quad UART @0x80010000 */ +#define CFG_CS1_START 0x80010000 +#define CFG_CS1_SIZE 0x00001000 +#define CFG_CS1_CFG 0x1d300 + +/* + * Select one of quarts as a default + * console. If undefined - PSC console + * wil be default + */ +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333333 + +#define CFG_RESET_ADDRESS 0xff000000 + +/* + * QUART Expanders support + */ +#if defined(CONFIG_QUART_CONSOLE) +/* + * We'll use NS16550 chip routines, + */ +#define CFG_NS16550 1 +#define CFG_NS16550_SERIAL 1 +#define CONFIG_CONS_INDEX 1 +/* + * To achieve necessary offset on SC16C554 + * A0-A2 (register select) pins with NS16550 + * functions (in struct NS16550), REG_SIZE + * should be 4, because A0-A2 pins are connected + * to DA2-DA4 address bus lines. + */ +#define CFG_NS16550_REG_SIZE 4 +/* + * LocalPlus Bus already inited in cpu_init_f(), + * so can work with QUART's chip selects. + * One of four SC16C554 UARTs is selected with + * A3-A4 (DA5-DA6) lines. + */ +#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) +#define CFG_NS16550_COM1 (CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5) +#elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9) +#define CFG_NS16550_COM1 (CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5) +#elif +#error "Wrong QUART expander number." +#endif + +/* + * SC16C554 chip's external crystal oscillator frequency + * is 7.3728 MHz + */ +#define CFG_NS16550_CLK 7372800 +#endif /* CONFIG_QUART_CONSOLE */ +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00005000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/netstar.h b/include/configs/netstar.h new file mode 100644 index 00000000000..697796a1143 --- /dev/null +++ b/include/configs/netstar.h @@ -0,0 +1,265 @@ +/* + * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl + * + * Configuation settings for the TI OMAP NetStar board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/omap1510.h> + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP1510 1 /* which is in a 5910 */ + +/* Input clock of PLL */ +#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz input clock */ +#define CONFIG_XTAL_FREQ 12000000 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_MISC_INIT_R /* There is nothing to really init */ +#define BOARD_LATE_INIT /* but we flash the LEDs here */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +#define CFG_DEVICE_NULLDEV 1 /* enable null device */ +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +/* + * FLASH organization + */ +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_BANKS 1 +#if (PHYS_SDRAM_1_SIZE == SZ_32M) +/*#if 1*/ +#define CFG_FLASH_CFI /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER /* Use the common driver */ +#define CFG_FLASH_EMPTY_INFO +#define CFG_MAX_FLASH_SECT 128 +#else +#define PHYS_FLASH_1_SIZE SZ_1M +#define CFG_MAX_FLASH_SECT 19 +#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* in ticks */ +#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) +#endif + +#define CFG_MONITOR_BASE PHYS_FLASH_1 +#define CFG_MONITOR_LEN SZ_256K + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH +#define ENV_IS_SOLITARY +#define CFG_ENV_ADDR 0x4000 +#define CFG_ENV_SIZE SZ_8K +#define CFG_ENV_SECT_SIZE SZ_8K +#define CFG_ENV_ADDR_REDUND 0x6000 +#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE +#define CONFIG_ENV_OVERWRITE + +/* + * Size of malloc() pool + */ +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +/* XXX #define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE)*/ +#define CFG_MALLOC_LEN SZ_4M + +/* + * The stack size is set up in start.S using the settings below + */ +/* XXX #define CONFIG_STACKSIZE SZ_8K /XXX* regular stack */ +#define CONFIG_STACKSIZE SZ_1M /* regular stack */ + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_SMC91111 +#define CONFIG_SMC91111_BASE 0x04000300 + +/* + * NS16550 Configuration + */ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */ +#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */ + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*#define CONFIG_SKIP_RELOCATE_UBOOT*/ +/*#define CONFIG_SKIP_LOWLEVEL_INIT */ + +/* + * NAND flash + */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CFG_NAND_BASE 0x04000000 + (2 << 23) + +/* + * JFFS2 partitions (mtdparts command line support) + */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=omapflash.0,nand0=omapnand.0" +#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);omapnand.0:48M(rootfs0),48M(rootfs1),-(data)" + +#if 0 +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_BOOTD | \ + CFG_CMD_DHCP | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_IMI | \ + CFG_CMD_LOADB | \ + CFG_CMD_NET | \ + CFG_CMD_MEMORY | \ + CFG_CMD_PING | \ + CFG_CMD_RUN) + +#else +#define CONFIG_COMMANDS (CFG_CMD_BDI | \ + CFG_CMD_BOOTD | \ + CFG_CMD_DHCP | \ + CFG_CMD_ENV | \ + CFG_CMD_FLASH | \ + CFG_CMD_NAND | \ + CFG_CMD_IMI | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_LOADB | \ + CFG_CMD_NET | \ + CFG_CMD_MEMORY | \ + CFG_CMD_PING | \ + CFG_CMD_RUN) + +#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ +#endif + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT +#define CONFIG_LOOPW + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ +#define CFG_AUTOLOAD "n" /* No autoload */ +#define CONFIG_BOOTCOMMAND "run nboot" +#define CONFIG_PREBOOT "run setup" +#define CONFIG_EXTRA_ENV_SETTINGS \ + "setup=setenv bootargs console=ttyS0,$baudrate " \ + "$mtdparts\0" \ + "ospart=0\0" \ + "setpart=" \ + "if test -n $swapos; then " \ + "if test $ospart -eq 0; then chpart nand0,1; else chpart nand0,0; fi; "\ + "setenv swapos; saveenv; " \ + "else " \ + "chpart nand0,$ospart; " \ + "fi\0" \ + "nfsargs=setenv bootargs $bootargs " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ + "nfsroot=$rootpath root=/dev/nfs\0" \ + "flashargs=run setpart;setenv bootargs $bootargs " \ + "root=/dev/mtdblock$partition ro " \ + "rootfstype=jffs2\0" \ + "initrdargs=setenv bootargs $bootargs " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ + "iboot=bootp;run initrdargs;tftp;bootm\0" \ + "fboot=run flashargs;fsload /boot/uImage;bootm\0" \ + "nboot=bootp;run nfsargs;tftp;bootm\0" + +#if 0 /* feel free to disable for development */ +#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ +#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d sec...\n" +#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */ +#define CONFIG_BOOT_RETRY_TIME 30 +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "# " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#define CONFIG_AUTO_COMPLETE + +#define CFG_MEMTEST_START PHYS_SDRAM_1 +#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */ + +/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. + * This time is further subdivided by a local divisor. + */ +#define CFG_TIMERBASE OMAP1510_TIMER1_BASE +#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +#define OMAP5910_DPLL_DIV 1 +#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \ + (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ) + +#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */ +#define OMAP5910_LCD_DIV 2 /* CKL/4 */ +#define OMAP5910_ARM_DIV 0 /* CKL/1 */ +#define OMAP5910_DSP_DIV 0 /* CKL/1 */ +#define OMAP5910_TC_DIV 1 /* CKL/2 */ +#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */ +#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */ + +#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */ +#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \ + (OMAP5910_LCD_DIV << 2) | \ + (OMAP5910_ARM_DIV << 4) | \ + (OMAP5910_DSP_DIV << 6) | \ + (OMAP5910_TC_DIV << 8) | \ + (OMAP5910_DSP_MMU_DIV << 10) | \ + (OMAP5910_ARM_TIM_SEL << 12)) + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap1710h3.h b/include/configs/omap1710h3.h new file mode 100644 index 00000000000..0a2cf9df046 --- /dev/null +++ b/include/configs/omap1710h3.h @@ -0,0 +1,236 @@ +/* + * (C) Copyright 2003 + * Texas Instruments. + * Kshitij Gupta <kshitij@ti.com> + * Configuation settings for the TI OMAP H3 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +//#define CFG_NAND_BOOT + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +//#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP1710 1 /* which is in a 1710 */ +#define CONFIG_H3_OMAP1710 1 /* a H3 Board */ + +/* input clock of PLL */ +/* the OMAP1710 H3 has 12MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 12000000 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ +/* +*/ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE 0x04000300 +#define CONFIG_LAN91C96_EXT_PHY + +/* + * NS16550 Configuration + */ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */ +#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1710 H3 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_NAND | CFG_CMD_JFFS2) +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> +#include <configs/omap1510.h> + + +/* + * Board NAND Info. + */ +#ifdef CFG_NAND_BOOT +#define CFG_NAND_ADDR 0x0c000000 /* physical address to access nand at CS3*/ +#else +#define CFG_NAND_ADDR 0x0a000000 /* physical address to access nand at CS2B*/ +#endif + +#define CONFIG_H3_NAND_16BIT + +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr + 2) = (__u8)(d); } while(0) +#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr + 4) = (__u8)(d); } while(0) +#define WRITE_NAND(d, adr) do{ *(volatile __u16 *)((unsigned long)adr) = (__u16)(d); } while(0) +#define READ_NAND(adr) ((volatile __u16)(*(volatile __u16 *)(unsigned long)adr)) + +#define NAND_NO_RB 1 +#define NAND_WAIT_READY(nand) udelay(35) + +#define NAND_CTL_CLRALE(nandptr) udelay(1); +#define NAND_CTL_SETALE(nandptr) udelay(1); +#define NAND_CTL_CLRCLE(nandptr) udelay(1); +#define NAND_CTL_SETCLE(nandptr) udelay(1); +#define NAND_DISABLE_CE(nand) udelay(1); +#define NAND_ENABLE_CE(nand) udelay(1); + + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd \ + root=/dev/nfs rw nfsroot=157.87.82.48:\ + /home/a0875451/mwd/myfs/target ip=dhcp" +#define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */ +#define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */ +#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */ +#define CONFIG_BOOTFILE "uImage" /* file to load */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "OMAP1710 H3 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x10000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x10000000 /* default load address */ + +/* The 1710 has 6 timers, they can be driven by the RefClk (12Mhz) or by + * DPLL1. This time is further subdivided by a local divisor. + */ +#define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */ +#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#ifdef CFG_NAND_BOOT +#define PHYS_FLASH_1 0x0a000000 /* Flash Bank #1 */ +#else +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#endif + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32MB */ +#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +#ifdef CFG_NAND_BOOT + +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_OFFSET 0x50000 /* environment starts here */ + +#else +/* addr of environment */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_OFFSET 0x20000 /* environment starts here */ + +#endif /* CFG_NAND_BOOT */ + +/* Flash banks JFFS2 should use */ +#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE) +#define CFG_JFFS2_MEM_NAND +#define CFG_JFFS2_FIRST_BANK 1 /* use flash_info[1] */ +#define CFG_JFFS2_NUM_BANKS 1 + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h index 12252ac129e..7fa373fc8b2 100644 --- a/include/configs/omap2420h4.h +++ b/include/configs/omap2420h4.h @@ -33,30 +33,29 @@ */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP2420 1 /* which is in a 2420 */ -#define CONFIG_OMAP2420H4 1 /* and on a H4 board */ -/*#define CONFIG_APTIX 1 #* define if on APTIX test chip */ -/*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */ +#define CONFIG_OMAP24XX 1 /* which is a 24XX Processor */ +#define CONFIG_OMAP242X 1 /* which is in a 242X */ +#define CONFIG_OMAP24XXH4 1 /* and on a H4 board */ /* Clock config to target*/ -#define PRCM_CONFIG_II 1 -/* #define PRCM_CONFIG_III 1 */ +/* #define PRCM_CONFIG_II 1 */ +#define PRCM_CONFIG_III 1 -#include <asm/arch/omap2420.h> /* get chip and board defs */ +#include <asm/arch/cpu.h> /* get chip and board defs */ /* On H4, NOR and NAND flash are mutual exclusive. Define this if you want to use NAND */ -/*#define CFG_NAND_BOOT */ -#ifdef CONFIG_APTIX -#define V_SCLK 1500000 -#else +/* +#define CFG_NAND_BOOT +#define CFG_NAND_2420 +*/ + #define V_SCLK 12000000 -#endif /* input clock of PLL */ -/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ +/* the OMAP24XX H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ #define CONFIG_SYS_CLK_FREQ V_SCLK #undef CONFIG_USE_IRQ /* no support for IRQs */ @@ -82,36 +81,25 @@ * SMC91c96 Etherent */ #define CONFIG_DRIVER_LAN91C96 -#define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300) +#define CONFIG_LAN91C96_BASE (DEBUG_BASE+0x300) #define CONFIG_LAN91C96_EXT_PHY /* * NS16550 Configuration */ -#ifdef CONFIG_APTIX -#define V_NS16550_CLK (6000000) /* 6MHz in current MaxSet */ -#else #define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ -#endif #define CFG_NS16550 #define CFG_NS16550_SERIAL #define CFG_NS16550_REG_SIZE (-4) #define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ -#define CFG_NS16550_COM1 OMAP2420_UART1 +#define CFG_NS16550_COM1 OMAP24XX_UART1 /* * select serial console configuration */ #define CONFIG_SERIAL1 1 /* UART1 on H4 */ - /* - * I2C configuration - */ -#define CONFIG_HARD_I2C -#define CFG_I2C_SPEED 100000 -#define CFG_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP24XX_I2C /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -129,10 +117,23 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> + /* + * I2C configuration + */ +#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#define CONFIG_HARD_I2C +#define CFG_I2C_SPEED 100 +#define CFG_I2C_SLAVE 1 +#define CFG_I2C_BUS 0 +#define CFG_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP24XX_I2C 1 +#endif + /* * Board NAND Info. */ -#define CFG_NAND_ADDR 0x04000000 /* physical address to access nand at CS0*/ +#define CFG_NAND_ADDR NAND_BASE /* physical address to access nand at CS0*/ +#define CFG_NAND_BASE NAND_BASE /* physical address to access nand at CS0*/ #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 @@ -145,17 +146,10 @@ #define NAND_MAX_FLOORS 1 #define NAND_MAX_CHIPS 1 -#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)0x6800A07C = d;} while(0) -#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)0x6800A080 = d;} while(0) -#define WRITE_NAND(d, adr) do {*(volatile u16 *)0x6800A084 = d;} while(0) -#define READ_NAND(adr) (*(volatile u16 *)0x6800A084) #define NAND_WAIT_READY(nand) udelay(10) - #define NAND_NO_RB 1 #define CFG_NAND_WP -#define NAND_WP_OFF() do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0) -#define NAND_WP_ON() do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0) #define NAND_CTL_CLRALE(nandptr) #define NAND_CTL_SETALE(nandptr) @@ -164,6 +158,7 @@ #define NAND_DISABLE_CE(nand) #define NAND_ENABLE_CE(nand) + #define CONFIG_BOOTDELAY 3 #ifdef NFS_BOOT_DEFAULTS @@ -180,11 +175,7 @@ /* * Miscellaneous configurable options */ -#ifdef CONFIG_APTIX -#define V_PROMPT "OMAP2420 Aptix # " -#else #define V_PROMPT "OMAP242x H4 # " -#endif #define CFG_LONGHELP /* undef to save memory */ #define CFG_PROMPT V_PROMPT @@ -194,23 +185,18 @@ #define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ -#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) +#define CFG_MEMTEST_START (OMAP24XX_SDRC_CS0) /* memtest works on */ +#define CFG_MEMTEST_END (OMAP24XX_SDRC_CS0+SZ_31M) #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ +#define CFG_LOAD_ADDR (OMAP24XX_SDRC_CS0) /* default load address */ /* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by * 32KHz clk, or from external sig. This rate is divided by a local divisor. */ -#ifdef CONFIG_APTIX -#define V_PVT 3 -#else #define V_PVT 7 /* use with 12MHz/128 */ -#endif - -#define CFG_TIMERBASE OMAP2420_GPT2 +#define CFG_TIMERBASE OMAP24XX_GPT2 #define CFG_PVT V_PVT /* 2^(pvt+1) */ #define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) @@ -229,14 +215,14 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 +#define PHYS_SDRAM_1 OMAP24XX_SDRC_CS0 #define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ -#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 +#define PHYS_SDRAM_2 OMAP24XX_SDRC_CS1 #define PHYS_FLASH_SECT_SIZE SZ_128K -#define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */ +#define PHYS_FLASH_1 FLASH_BASE /* Flash Bank #1 */ #define PHYS_FLASH_SIZE_1 SZ_32M -#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */ +#define PHYS_FLASH_2 (FLASH_BASE+SZ_32M) /* same cs, 2 chips in series */ #define PHYS_FLASH_SIZE_2 SZ_32M /*----------------------------------------------------------------------- @@ -246,19 +232,22 @@ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ #define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ -#define CFG_MONITOR_LEN SZ_128K /* Reserve 1 sector */ +#define CFG_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE_1 } #ifdef CFG_NAND_BOOT #define CFG_ENV_IS_IN_NAND 1 #define CFG_ENV_OFFSET 0x80000 /* environment starts here */ #else -#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_128K) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_256K) #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE #define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */ #endif + + + /*----------------------------------------------------------------------- * CFI FLASH driver setup */ @@ -271,23 +260,40 @@ #define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ +/* Flash banks JFFS2 should use */ +#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE) #define CFG_JFFS2_MEM_NAND +#define CFG_JFFS2_FIRST_BANK 1 /* use flash_info[1] */ +#define CFG_JFFS2_NUM_BANKS 1 -/* - * JFFS2 partitions - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE -#define CONFIG_JFFS2_DEV "nor1" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_JFFS2_CMDLINE -#define MTDIDS_DEFAULT "nor1=omap2420-1" -#define MTDPARTS_DEFAULT "mtdparts=omap2420-1:-(jffs2)" -*/ +/* GPMC Settings */ +#ifdef CFG_NAND_BOOT +/* NAND */ +#define FLASH_CONFIGURATION_IDX 1 +#else +/* NOR */ +#define FLASH_CONFIGURATION_IDX 0 +#endif +#define PROC_NOR_SIZE GPMC_SIZE_64M +#define PROC_NAND_SIZE GPMC_SIZE_64M +#define DBG_MPDB_SIZE GPMC_SIZE_16M + + +/* Other NAND Access APIs */ +#ifdef CFG_NAND_BOOT +#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)(0x6800A07C)= (d);} while(0) +#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)(0x6800A080) = (d);} while(0) +#define WRITE_NAND(d, adr) do {*(volatile u16 *)(0x6800A084)= (d);} while(0) +#define READ_NAND(adr) (*(volatile u16 *)(0x6800A084)) +#define NAND_WP_OFF() do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) +#define NAND_WP_ON() do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) +#define NAND_WAIT_READY(nand) udelay(10) +#endif /* NAND Commands */ #endif /* __CONFIG_H */ diff --git a/include/configs/omap2420h4.h.contrib b/include/configs/omap2420h4.h.contrib new file mode 100644 index 00000000000..50c6204c81a --- /dev/null +++ b/include/configs/omap2420h4.h.contrib @@ -0,0 +1,277 @@ +/* + * (C) Copyright 2004 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Kshitij Gupta <kshitij@ti.com> + * + * Configuration settings for the 242x TI H4 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP2420 1 /* which is in a 2420 */ +#define CONFIG_OMAP2420H4 1 /* and on a H4 board */ +//#define CONFIG_APTIX 1 /* define if on APTIX test chip */ +//#define CONFIG_VIRTIO 1 /* Using Virtio simulator */ + +/* Clock config to target*/ +#define PRCM_CONFIG_II 1 +//#define PRCM_CONFIG_III 1 + +/* Memory configuration on board */ +//#define CONFIG_OPTIMIZE_DDR 1 + +/* use only part of sram in startup */ +#define CONFIG_PARTIAL_SRAM 1 + +#include <asm/arch/omap2420.h> /* get chip and board defs */ + +/* On H4, NOR and NAND flash are mutual exclusive. + Define this if you want to use NAND + */ +//#define CFG_NAND_BOOT + +#ifdef CONFIG_APTIX +#define V_SCLK 1500000 +#else +#define V_SCLK 12000000 +#endif + +/* input clock of PLL */ +/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ +#define CONFIG_SYS_CLK_FREQ V_SCLK + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * SMC91c96 Etherent + */ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300) +#define CONFIG_LAN91C96_EXT_PHY + +/* + * NS16550 Configuration + */ +#ifdef CONFIG_APTIX +#define V_NS16550_CLK (6000000) /* 6MHz in current MaxSet */ +#else +#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ +#endif + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ +#define CFG_NS16550_COM1 OMAP2420_UART1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* UART1 on H4 */ + + /* + * I2C configuration + */ +#define CONFIG_HARD_I2C +#define CFG_I2C_SPEED 100000 +#define CFG_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP24XX_I2C + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +#ifdef CFG_NAND_BOOT +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2) +#else +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2) +#endif +// I'd like to get to these. Snap kernel loads if we make MMC go // + // #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_NAND | CFG_CMD_JFFS2 | CFG_CMD_DHCP | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_I2C) + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Board NAND Info. + */ +#define CFG_NAND_ADDR 0x04000000 /* physical address to access nand at CS0*/ + +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)0x6800A07C = d;} while(0) +#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)0x6800A080 = d;} while(0) +#define WRITE_NAND(d, adr) do {*(volatile u16 *)0x6800A084 = d;} while(0) +#define READ_NAND(adr) (*(volatile u16 *)0x6800A084) +#define NAND_WAIT_READY(nand) udelay(10) + +#define NAND_NO_RB 1 + +#define CFG_NAND_WP +#define NAND_WP_OFF() do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0) +#define NAND_WP_ON() do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0) + + +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) + + +#define CONFIG_BOOTDELAY 3 + +#ifdef NFS_BOOT_DEFAULTS +#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp" +#else +#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +#endif + +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_IPADDR 128.247.77.90 +#define CONFIG_SERVERIP 128.247.77.158 +#define CONFIG_BOOTFILE "uImage" + +/* + * Miscellaneous configurable options + */ +#ifdef CONFIG_APTIX +#define V_PROMPT "OMAP2420 Aptix # " +#else +#define V_PROMPT "OMAP242x H4 # " +#endif + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT V_PROMPT +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START (OMAP2420_SDRC_CS0) /* memtest works on */ +#define CFG_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M) + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (OMAP2420_SDRC_CS0) /* default load address */ + +/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#ifdef CONFIG_APTIX +#define V_PVT 3 +#else +#define V_PVT 7 /* use with 12MHz/128 */ +#endif + +#define CFG_TIMERBASE OMAP2420_GPT2 +#define CFG_PVT V_PVT /* 2^(pvt+1) */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1 + +#define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE_1 SZ_32M +#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */ +#define PHYS_FLASH_SIZE_2 SZ_32M +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ + +#ifdef CFG_NAND_BOOT +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x80000 /* environment starts here */ +#else +#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_128K) +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (30*75*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (30*75*CFG_HZ) /* Timeout for Flash Write */ + +/* Flash banks JFFS2 should use */ +#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE) +#define CFG_JFFS2_MEM_NAND +#define CFG_JFFS2_FIRST_BANK 1 /* use flash_info[1] */ +#define CFG_JFFS2_NUM_BANKS 1 + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap2420h4.h.keep b/include/configs/omap2420h4.h.keep new file mode 100644 index 00000000000..f1175b4f4c8 --- /dev/null +++ b/include/configs/omap2420h4.h.keep @@ -0,0 +1,301 @@ +/* + * (C) Copyright 2004 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Kshitij Gupta <kshitij@ti.com> + * + * Configuration settings for the 242x TI H4 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP24XX 1 /* which is a 24XX Processor */ +#define CONFIG_OMAP242X 1 /* which is in a 242X */ +#define CONFIG_OMAP24XXH4 1 /* and on a H4 board */ +/*#define CONFIG_VIRTIO 1 #* Using Virtio simulator */ + +/* Clock config to target*/ +#define PRCM_CONFIG_II 1 +/* #define PRCM_CONFIG_III 1 */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +/* On H4, NOR and NAND flash are mutual exclusive. + Define this if you want to use NAND + */ +/* +#define CFG_NAND_BOOT +#define CFG_NAND_2420 +*/ + +#define V_SCLK 12000000 + +/* input clock of PLL */ +/* the OMAP24XX H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ +#define CONFIG_SYS_CLK_FREQ V_SCLK + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * SMC91c96 Etherent + */ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE (H4_CS1_BASE+0x300) +#define CONFIG_LAN91C96_EXT_PHY + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ +#define CFG_NS16550_COM1 OMAP24XX_UART1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* UART1 on H4 */ + + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +#ifdef CFG_NAND_BOOT +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT) +#endif +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + + /* + * I2C configuration + */ +#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#define CONFIG_HARD_I2C +#define CFG_I2C_SPEED 100 +#define CFG_I2C_SLAVE 1 +#define CFG_I2C_BUS 0 +#define CFG_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP24XX_I2C 1 +#endif + +/* + * Board NAND Info. + */ +#define CFG_NAND_ADDR 0x04000000 /* physical address to access nand at CS0*/ + +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define NAND_WAIT_READY(nand) udelay(10) +#define NAND_NO_RB 1 + +#define CFG_NAND_WP + +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) + + +#define CONFIG_BOOTDELAY 3 + +#ifdef NFS_BOOT_DEFAULTS +#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp" +#else +#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +#endif + +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_IPADDR 128.247.77.90 +#define CONFIG_SERVERIP 128.247.77.158 +#define CONFIG_BOOTFILE "uImage" + +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "OMAP242x H4 # " + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT V_PROMPT +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START (OMAP24XX_SDRC_CS0) /* memtest works on */ +#define CFG_MEMTEST_END (OMAP24XX_SDRC_CS0+SZ_31M) + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (OMAP24XX_SDRC_CS0) /* default load address */ + +/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define V_PVT 7 /* use with 12MHz/128 */ +#define CFG_TIMERBASE OMAP24XX_GPT2 +#define CFG_PVT V_PVT /* 2^(pvt+1) */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP24XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP24XX_SDRC_CS1 + +#define PHYS_FLASH_SECT_SIZE SZ_128K +#define PHYS_FLASH_1 H4_CS0_BASE /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE_1 SZ_32M +#define PHYS_FLASH_2 (H4_CS0_BASE+SZ_32M) /* same cs, 2 chips in series */ +#define PHYS_FLASH_SIZE_2 SZ_32M + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ +#define CFG_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE_1 } + +#ifdef CFG_NAND_BOOT +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x80000 /* environment starts here */ +#else +#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_256K) +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE +#define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */ +#endif + + + + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ + +/* Flash banks JFFS2 should use */ +#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE) +#define CFG_JFFS2_MEM_NAND +#define CFG_JFFS2_FIRST_BANK 1 /* use flash_info[1] */ +#define CFG_JFFS2_NUM_BANKS 1 + +/* GPMC Settings */ +#ifdef CFG_NAND_BOOT +/* NAND */ +#define OMAP24XX_GPMC_CS0 SMNAND +#else +/* NOR */ +#define OMAP24XX_GPMC_CS0 STNOR +#endif + +#define OMAP24XX_GPMC_CS0_SIZE GPMC_SIZE_64M +#define OMAP24XX_GPMC_CS0_MAP CFG_FLASH_BASE + +#define OMAP24XX_GPMC_CS1 MPDB +#define OMAP24XX_GPMC_CS1_SIZE GPMC_SIZE_16M +#define OMAP24XX_GPMC_CS1_MAP H4_CS1_BASE + +/* Other NAND Access APIs */ +#ifdef CFG_NAND_BOOT +#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)(GPMC_NAND_CMD_0)= (d);} while(0) +#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)(GPMC_NAND_ADR_0) = (d);} while(0) +#define WRITE_NAND(d, adr) do {*(volatile u16 *)(GPMC_NAND_DAT_0)= (d);} while(0) +#define READ_NAND(adr) (*(volatile u16 *)(GPMC_NAND_DAT_0)) +#define NAND_WP_OFF() do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) +#define NAND_WP_ON() do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) +#define NAND_WAIT_READY(nand) udelay(10) +#endif /* NAND Commands */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap2430sdp.h b/include/configs/omap2430sdp.h new file mode 100644 index 00000000000..dbd92b944c2 --- /dev/null +++ b/include/configs/omap2430sdp.h @@ -0,0 +1,305 @@ +/* + * (C) Copyright 2004-2005 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Kshitij Gupta <kshitij@ti.com> + * + * Configuration settings for the 242x TI SDP2430 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP24XX 1 /* which is a 24XX */ +#define CONFIG_OMAP243X 1 /* which is in a 243X */ +#define CONFIG_2430SDP 1 /* working with SDP? make this 1 */ + +/* Clock config for target */ +//#define PRCM_CONFIG_5A 1 /* 2430 ES1 */ +#define PRCM_CONFIG_2 1 /* 2430 ES2+330ARM+DDR-165-PISMO */ + +#define OMAP2430_SQUARE_CLOCK_INPUT 1 + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define V_SCLK 13000000 + +/* input clock of PLL */ +/* the OMAP24XX SDP has 12MHz, 13MHz, or 19.2Mhz crystal input */ +#define CONFIG_SYS_CLK_FREQ V_SCLK + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK V_NS16550_CLK +#define CFG_NS16550_COM1 OMAP24XX_UART1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* UART1 on SDP */ +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} + +#define NET_CMDS (CFG_CMD_DHCP|CFG_CMD_NFS|CFG_CMD_NET) + +/* Config CMD*/ +//#define CONFIG_COMMANDS ((CFG_CMD_I2C | CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_NAND | CFG_CMD_ONENAND | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT) + +//#define CONFIG_COMMANDS ((CFG_CMD_I2C | CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT) + +#define CONFIG_COMMANDS ((CFG_CMD_I2C | CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_ONENAND | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT) + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NET) +/* + * SMC91c96 Etherent + */ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE (DEBUG_BASE+0x300) +#define CONFIG_LAN91C96_EXT_PHY +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#define CFG_I2C_SPEED 100 +#define CFG_I2C_SLAVE 1 +#define CFG_I2C_BUS 0 +#define CFG_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP24XX_I2C 1 +#endif + +/* + * Board NAND Info. + */ +#define CFG_NAND_ADDR NAND_BASE /* physical address to access nand*/ +#define CFG_NAND_BASE NAND_BASE /* physical address to access nand at CS0*/ + + +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define NAND_NO_RB 1 +#define CFG_NAND_WP + + +#define CONFIG_BOOTDELAY 3 + +#ifdef NFS_BOOT_DEFAULTS +#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp" +#else + +#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" + +#endif + +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_IPADDR 128.247.77.90 +#define CONFIG_SERVERIP 128.247.77.158 +#define CONFIG_BOOTFILE "uImage" + +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "OMAP243X SDP # " + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT V_PROMPT +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START (OMAP24XX_SDRC_CS0) /* memtest works on */ +#define CFG_MEMTEST_END (OMAP24XX_SDRC_CS0+SZ_31M) + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (OMAP24XX_SDRC_CS0) /* default load address */ + +/* The 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define V_PVT 7 + +#define CFG_TIMERBASE OMAP24XX_GPT2 +#define CFG_PVT V_PVT /* 2^(pvt+1) */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP24XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP24XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +//#define SDRC_B_R_C 1 +//#define SDRC_B1_R_B0_C 1 +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO - REV A Version is as follows */ +#define PISMO_CS0 PISMO_SIBLEY0 +#define PISMO_CS1 PISMO_SIBLEY1 +#define PISMO_CS2 PISMO_ONENAND +#define PROC_NOR_SIZE GPMC_SIZE_64M +#define PROC_NAND_SIZE GPMC_SIZE_64M +#define PISMO_SIB0_SIZE GPMC_SIZE_64M +#define PISMO_SIB1_SIZE GPMC_SIZE_64M +#define PISMO_ONEN_SIZE GPMC_SIZE_128M +#define DBG_MPDB_SIZE GPMC_SIZE_16M +#define PISMO_PCMCIA_SIZE GPMC_SIZE_128M + +#define PHYS_FLASH_SIZE SZ_32M +#define CFG_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ +#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ + +#define CFG_MAX_FLASH_BANKS 4 /* max number of flash banks */ +#define CFG_FLASH_BANKS_LIST { FLASH_BASE, FLASH_BASE + PHYS_FLASH_SIZE, SIBLEY_MAP1, SIBLEY_MAP2 } + + +# define CFG_FLASH_BASE boot_flash_base +#define PHYS_FLASH_SECT_SIZE boot_flash_sec + +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ +#define CFG_ONENAND_BASE ONENAND_MAP + +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_IS_IN_ONENAND 1 +#define CFG_ENV_IS_IN_FLASH 1 +#define ONENAND_ENV_OFFSET 0xc0000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0x80000 /* environment starts here */ + +#define CFG_ENV_SECT_SIZE boot_flash_sec +#define CFG_ENV_OFFSET boot_flash_off +#define CFG_ENV_ADDR boot_flash_env_addr + + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ +#define CFG_FLASH_QUIET_TEST 1 /* Dont crib abt missing chips */ +#define CFG_FLASH_CFI_WIDTH 0x02 +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ + +/* Flash banks JFFS2 should use */ +#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE) +#define CFG_JFFS2_MEM_NAND +#define CFG_JFFS2_FIRST_BANK CFG_MAX_FLASH_BANKS /* use flash_info[2] */ +#define CFG_JFFS2_NUM_BANKS 1 +#define CONFIG_LED_INFO +#define CONFIG_LED_LEN 16 + +#define ENV_IS_VARIABLE 1 + +#ifndef __ASSEMBLY__ +extern unsigned int nand_cs_base; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +#define WRITE_NAND_COMMAND(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_CMD)) +#define WRITE_NAND_ADDRESS(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_ADR)) +#define WRITE_NAND(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_DAT)) +#define READ_NAND(adr) __raw_readw((nand_cs_base + GPMC_NAND_DAT)) + +/* Other NAND Access APIs */ +#define NAND_WP_OFF() do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) +#define NAND_WP_ON() do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) +#define NAND_WAIT_READY(nand) udelay(10) + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap3430labrador.h b/include/configs/omap3430labrador.h new file mode 100644 index 00000000000..5d3fef453fb --- /dev/null +++ b/include/configs/omap3430labrador.h @@ -0,0 +1,309 @@ +/* + * (C) Copyright 2006 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Configuration settings for the 3430 TI SDP3430 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_3430LABRADOR 1 /* working on Labrador */ +//#define CONFIG_3430_AS_3410 1 /* true for 3430 in 3410 mode */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ + +#if (V_OSCK > 19200000) +#define V_SCLK (V_OSCK >> 1) +#else +#define V_SCLK V_OSCK +#endif + +#define PRCM_CLK_CFG2_266MHZ 1 /* VDD2=1.15v - 133MHz DDR */ +//#define PRCM_CLK_CFG2_332MHZ 1 /* VDD2=1.15v - 166MHz DDR */ +#define PRCM_PCLK_OPP2 1 /* ARM=500MHz - VDD1=1.20v */ + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_ENV_SIZE SZ_128K /* Total Size Environment Sector */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) +#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK (48000000) /* 48MHz */ + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK V_NS16550_CLK +#define CFG_NS16550_COM3 OMAP34XX_UART3 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL3 3 /* UART3 on board */ +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 3 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} + +#define NET_CMDS (CFG_CMD_DHCP|CFG_CMD_NFS|CFG_CMD_NET) + +#ifndef CONFIG_OPTIONAL_NOR_POPULATED +//#define C_MSK (CFG_CMD_FLASH | CFG_CMD_IMLS) +#define C_MSK (CFG_CMD_IMLS | CFG_CMD_FLASH) +#endif + +/* Config CMD*/ +#define CONFIG_COMMANDS (( CFG_CMD_I2C | CONFIG_CMD_DFL | CFG_CMD_DHCP \ + | CFG_CMD_NAND) & ~(C_MSK)) + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NET) +/* + * SMC91c96 Etherent + */ +#define CONFIG_DRIVER_SMSC9118 +#define CONFIG_SMSC9118_BASE (DEBUG_BASE) +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#define CFG_I2C_SPEED 100 +#define CFG_I2C_SLAVE 1 +#define CFG_I2C_BUS 0 +#define CFG_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#endif + +/* + * Board NAND Info. + */ +#define CFG_NAND_ADDR NAND_BASE /* physical address to access nand*/ +#define CFG_NAND_BASE NAND_BASE /* physical address to access nand at CS0*/ +#define CFG_NAND_WIDTH_16 + +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define NAND_ALLOW_ERASE_ALL +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define NAND_NO_RB 1 +#define CFG_NAND_WP + +#define CONFIG_BOOTDELAY 3 + +#ifdef NFS_BOOT_DEFAULTS +#define CONFIG_BOOTARGS "mem=64M console=ttyS2,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp" +#else +#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=64M console=ttyS2,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +#endif + +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_IPADDR 128.247.77.90 +#define CONFIG_SERVERIP 128.247.77.158 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "OMAP34XX LAB # " + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT V_PROMPT +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest works on */ +#define CFG_MEMTEST_END (OMAP34XX_SDRC_CS0+SZ_31M) + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load address */ + +/* 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define V_PVT 7 + +#define CFG_TIMERBASE OMAP34XX_GPT2 +#define CFG_PVT V_PVT /* 2^(pvt+1) */ +#define CFG_HZ ((V_SCLK)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +/*#define SDRC_B_R_C 1 */ +/*#define SDRC_B1_R_B0_C 1 */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +/** REMOVE ME ***/ +#define PISMO1_NOR_SIZE_SDPV2 GPMC_SIZE_128M +#define PISMO1_NOR_SIZE GPMC_SIZE_64M + +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M +#define DBG_MPDB_SIZE GPMC_SIZE_16M +#define PISMO2_SIZE 0 + +#define CFG_MAX_FLASH_SECT (520) /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CFG_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ + +#define PHYS_FLASH_SIZE_SDPV2 SZ_128M +#define PHYS_FLASH_SIZE SZ_32M + +#define CFG_FLASH_BASE boot_flash_base +#define PHYS_FLASH_SECT_SIZE boot_flash_sec +/* Dummy declaration of flash banks to get compilation right */ +#define CFG_FLASH_BANKS_LIST {0, 0} + +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at start of flash */ + +#if 1 +#define CFG_ENV_IS_IN_NAND 1 +#define ENV_IS_VARIABLE 1 +#else +#define CFG_ENV_IS_NOWHERE 1 +#endif + +#ifdef CONFIG_OPTIONAL_NOR_POPULATED +# define CFG_ENV_IS_IN_FLASH 1 +#endif + +#define SMNAND_ENV_OFFSET 0xc0000 /* environment starts here */ + +#define CFG_ENV_SECT_SIZE boot_flash_sec +#define CFG_ENV_OFFSET boot_flash_off +#define CFG_ENV_ADDR boot_flash_env_addr + + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#ifndef CONFIG_OPTIONAL_NOR_POPULATED +#define CFG_NO_FLASH 1 /* Disable NOR Flash support */ +#else +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ +#define CFG_FLASH_QUIET_TEST 1 /* Dont crib abt missing chips */ +#define CFG_FLASH_CFI_WIDTH 0x02 +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ + +/* Flash banks JFFS2 should use */ +#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE) +#define CFG_JFFS2_MEM_NAND +#define CFG_JFFS2_FIRST_BANK CFG_MAX_FLASH_BANKS /* use flash_info[2] */ +#define CFG_JFFS2_NUM_BANKS 1 +#define CONFIG_LED_INFOnand_read_buf16 +#define CONFIG_LED_LEN 16 +#endif /* optional NOR flash */ + +#ifndef __ASSEMBLY__ +extern unsigned int nand_cs_base; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +#define WRITE_NAND_COMMAND(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_CMD)) +#define WRITE_NAND_ADDRESS(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_ADR)) +#define WRITE_NAND(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_DAT)) +#define READ_NAND(adr) __raw_readw((nand_cs_base + GPMC_NAND_DAT)) + +/* Other NAND Access APIs */ +#define NAND_WP_OFF() do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) +#define NAND_WP_ON() do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) +#define NAND_WAIT_READY(nand) udelay(10) + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap3430sdp.h b/include/configs/omap3430sdp.h new file mode 100644 index 00000000000..e5d3ea71cbc --- /dev/null +++ b/include/configs/omap3430sdp.h @@ -0,0 +1,331 @@ +/* + * (C) Copyright 2006 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Configuration settings for the 3430 TI SDP3430 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP34XX 1 /* which is a 34XX */ +#define CONFIG_OMAP3430 1 /* which is in a 3430 */ +#define CONFIG_3430SDP 1 /* working with SDP */ +//#define CONFIG_3430VIRTIO 1 /* working with SDP? comment this line */ +//#define CONFIG_3430ZEBU 1 /* enable this for 3430 ES2 ZeBu */ +//#define CONFIG_3430_AS_3410 1 /* true for 3430 in 3410 mode */ + +//#define CONFIG_ICACHE_OFF 1 /* disabling I Cache for ZeBu */ +//#define CONFIG_L2_OFF 1 + +#define CONFIG_OFF_PADCONF 0 /* Enable OFFMODE pad configuration */ + +#ifdef CONFIG_3430ZEBU + #define CFG_NO_FLASH 1 /* Disable Flash support */ + #define CONFIG_ICACHE_OFF 1 /* disabling I Cache for ZeBu */ +#endif + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ + +#if (V_OSCK > 19200000) +#define V_SCLK (V_OSCK >> 1) +#else +#define V_SCLK V_OSCK +#endif + +//#define PRCM_CLK_CFG2_266MHZ 1 /* VDD2=1.15v - 133MHz DDR */ +#define PRCM_CLK_CFG2_332MHZ 1 /* VDD2=1.15v - 166MHz DDR */ +#define PRCM_PCLK_OPP2 1 /* ARM=500MHz - VDD1=1.20v */ + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_ENV_SIZE SZ_128K /* Total Size Environment Sector */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) +#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK V_NS16550_CLK +#define CFG_NS16550_COM1 OMAP34XX_UART1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* UART1 on SDP */ +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200} + +#define NET_CMDS (CFG_CMD_DHCP|CFG_CMD_NFS|CFG_CMD_NET) + +/* Config CMD*/ +#ifdef CONFIG_3430ZEBU +#define CONFIG_COMMANDS (( CFG_CMD_I2C | CONFIG_CMD_DFL | CFG_CMD_DHCP) & ~(CFG_CMD_AUTOSCRIPT | CFG_CMD_FLASH | CFG_CMD_IMLS | CFG_CMD_NET) ) +#else +//#define CONFIG_COMMANDS (( CFG_CMD_I2C | CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_ONENAND | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT) +//#define CONFIG_COMMANDS (( CFG_CMD_I2C | CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_NAND | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT) +#define CONFIG_COMMANDS (( CFG_CMD_I2C | CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_JFFS2 | CFG_CMD_ONENAND | CFG_CMD_NAND) & ~CFG_CMD_AUTOSCRIPT) + +#endif + +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NET) +/* + * SMC91c96 Etherent + */ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE (DEBUG_BASE) +#define CONFIG_LAN91C96_EXT_PHY +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#define CFG_I2C_SPEED 100 +#define CFG_I2C_SLAVE 1 +#define CFG_I2C_BUS 0 +#define CFG_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP34XX_I2C 1 +#endif + +/* + * Board NAND Info. + */ +#define CFG_NAND_ADDR NAND_BASE /* physical address to access nand*/ +#define CFG_NAND_BASE NAND_BASE /* physical address to access nand at CS0*/ + + +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define NAND_ALLOW_ERASE_ALL +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define NAND_NO_RB 1 +#define CFG_NAND_WP + +/* Environment information */ +#if defined(CONFIG_3430ZEBU) && !defined(CONFIG_3430ES2) +/* Give the standard Kernel jump command as boot cmd and without any delay */ +#define CONFIG_BOOTDELAY 0 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootcmd=go 0x80008000\0" +#else +#define CONFIG_BOOTDELAY 3 + +#endif /*CONFIG_3430ZEBU */ + +#ifdef NFS_BOOT_DEFAULTS +#define CONFIG_BOOTARGS "mem=64M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp" +#else +#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=64M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +#endif + +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_IPADDR 128.247.77.90 +#define CONFIG_SERVERIP 128.247.77.158 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_AUTO_COMPLETE 1 +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "OMAP34XX SDP # " + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT V_PROMPT +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest works on */ +#define CFG_MEMTEST_END (OMAP34XX_SDRC_CS0+SZ_31M) + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load address */ + +/* 2430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define V_PVT 7 + +#define CFG_TIMERBASE OMAP34XX_GPT2 +#define CFG_PVT V_PVT /* 2^(pvt+1) */ +#define CFG_HZ ((V_SCLK)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 + +/* SDRAM Bank Allocation method */ +/*#define SDRC_B_R_C 1 */ +/*#define SDRC_B1_R_B0_C 1 */ +#define SDRC_R_B_C 1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ + +/* Configure the PISMO */ +#define PISMO1_NOR_SIZE_SDPV2 GPMC_SIZE_128M +#define PISMO1_NOR_SIZE GPMC_SIZE_64M + +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M +#define DBG_MPDB_SIZE GPMC_SIZE_16M +#define PISMO2_SIZE 0 + +#define CFG_MAX_FLASH_SECT (520) /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of flash banks */ +#define CFG_MONITOR_LEN SZ_256K /* Reserve 2 sectors */ + +#define PHYS_FLASH_SIZE_SDPV2 SZ_128M +#define PHYS_FLASH_SIZE SZ_32M + +#define CFG_FLASH_BASE boot_flash_base +#define PHYS_FLASH_SECT_SIZE boot_flash_sec +/* Dummy declaration of flash banks to get compilation right */ +#define CFG_FLASH_BANKS_LIST {0, 0} + +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at start of flash */ +#define CFG_ONENAND_BASE ONENAND_MAP + +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_IS_IN_ONENAND 1 +#define CFG_ENV_IS_IN_FLASH 1 +#define ONENAND_ENV_OFFSET 0xc0000 /* environment starts here */ +#define SMNAND_ENV_OFFSET 0xc0000 /* environment starts here */ + +#define CFG_ENV_SECT_SIZE boot_flash_sec +#define CFG_ENV_OFFSET boot_flash_off +#define CFG_ENV_ADDR boot_flash_env_addr + + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#ifndef CONFIG_3430ZEBU +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ +#define CFG_FLASH_QUIET_TEST 1 /* Dont crib abt missing chips */ +#define CFG_FLASH_CFI_WIDTH 0x02 +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ + +/* Flash banks JFFS2 should use */ +#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE) +#define CFG_JFFS2_MEM_NAND +#define CFG_JFFS2_FIRST_BANK CFG_MAX_FLASH_BANKS /* use flash_info[2] */ +#define CFG_JFFS2_NUM_BANKS 1 +#define CONFIG_LED_INFO +#define CONFIG_LED_LEN 16 + +#define ENV_IS_VARIABLE 1 +#endif + +#ifndef __ASSEMBLY__ +extern unsigned int nand_cs_base; +extern unsigned int boot_flash_base; +extern volatile unsigned int boot_flash_env_addr; +extern unsigned int boot_flash_off; +extern unsigned int boot_flash_sec; +extern unsigned int boot_flash_type; +#endif + +#define WRITE_NAND_COMMAND(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_CMD)) +#define WRITE_NAND_ADDRESS(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_ADR)) +#define WRITE_NAND(d, adr) __raw_writew(d, (nand_cs_base + GPMC_NAND_DAT)) +#define READ_NAND(adr) __raw_readw((nand_cs_base + GPMC_NAND_DAT)) + +/* Other NAND Access APIs */ +#define NAND_WP_OFF() do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) +#define NAND_WP_ON() do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) +#ifdef CFG_NAND_LEGACY +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) +#endif +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) +#define NAND_WAIT_READY(nand) udelay(10) + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap5912osk.h b/include/configs/omap5912osk.h index 605563aa0a8..5db4f52beb6 100644 --- a/include/configs/omap5912osk.h +++ b/include/configs/omap5912osk.h @@ -35,6 +35,9 @@ #define CONFIG_OMAP1610 1 /* 5912 is same as 1610 */ #define CONFIG_OSK_OMAP5912 1 /* a OSK Board */ +#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ +#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ + /* input clock of PLL */ /* the OMAP5912 OSK has 12MHz input clock */ #define CONFIG_SYS_CLK_FREQ 12000000 @@ -45,11 +48,13 @@ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 /* Required for ramdisk support */ /* * Size of malloc() pool */ #define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers @@ -142,27 +147,44 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ +#define PHYS_FLASH_2 0x01000000 /* Flash Bank #2 */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 -#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ /*----------------------------------------------------------------------- - * FLASH and environment organization + * FLASH driver setup */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ + +#define CFG_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 } + +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define PHYS_FLASH_SIZE 0x02000000 /* 32MB */ #define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ -/* addr of environment */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) + +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ /* timeout values are in ticks */ #define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ #define CFG_ENV_IS_IN_FLASH 1 +/* addr of environment */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) + #define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ #define CFG_ENV_OFFSET 0x20000 /* environment starts here */ diff --git a/include/configs/omaptest2430.h b/include/configs/omaptest2430.h new file mode 100644 index 00000000000..6b19e04f1dc --- /dev/null +++ b/include/configs/omaptest2430.h @@ -0,0 +1,304 @@ +/* + * (C) Copyright 2004 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Kshitij Gupta <kshitij@ti.com> + * + * Configuration settings for the 242x TI H4 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP24XX 1 /* which is a 24XX Processor */ +#define CONFIG_OMAP242X 1 /* which is in a 242X */ +#define CONFIG_OMAP24XXH4 1 /* and on a H4 board */ +#define CONFIG_TEST2430 1 /* to test 2430SDP connectivity */ + +/* input clock of PLL */ +/* the OMAP24XX H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */ +//#define INPUT_CLK_12MHZ 1 +#define INPUT_CLK_13MHZ 1 /* default is 12MHz */ + +#define PRCM_CONFIG_II 1 +//#define PRCM_CONFIG_III 1 + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +/* On H4, NOR and NAND flash are mutual exclusive. + Define this if you want to use NAND + */ +/*#define CFG_NAND_BOOT */ + +#ifdef INPUT_CLK_13MHZ +#define V_SCLK 13000000 +#else +#define V_SCLK 12000000 +#endif + +#define CONFIG_SYS_CLK_FREQ V_SCLK + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 +#define CONFIG_REVISION_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + SZ_128K) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * SMC91c96 Etherent + */ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE (DEBUG_BASE+0x300) +#define CONFIG_LAN91C96_EXT_PHY + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */ + +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */ +#define CFG_NS16550_COM1 OMAP24XX_UART1 + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* UART1 on H4 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +#ifdef CFG_NAND_BOOT +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_NAND | CFG_CMD_JFFS2) +#else +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_I2C | CFG_CMD_JFFS2) & ~CFG_CMD_AUTOSCRIPT) +#endif +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + + /* + * I2C configuration + */ +#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#define CONFIG_HARD_I2C +#define CFG_I2C_SPEED 100 +#define CFG_I2C_SLAVE 1 +#define CFG_I2C_BUS 0 +#define CFG_I2C_BUS_SELECT 1 +#define CONFIG_DRIVER_OMAP24XX_I2C 1 +#endif + +/* + * Board NAND Info. + */ +#define CFG_NAND_ADDR 0x04000000 /* physical address to access nand at CS0*/ + +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define NAND_WAIT_READY(nand) udelay(10) + +#define NAND_NO_RB 1 + +#define CFG_NAND_WP + +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) + + +#define CONFIG_BOOTDELAY 3 + +#ifdef NFS_BOOT_DEFAULTS +#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=128.247.77.158:/home/a0384864/wtbu/rootfs ip=dhcp" +#else +#define CONFIG_BOOTARGS "root=/dev/ram0 rw mem=32M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192" +#endif + +#define CONFIG_NETMASK 255.255.254.0 +#define CONFIG_IPADDR 128.247.77.90 +#define CONFIG_SERVERIP 128.247.77.158 +#define CONFIG_BOOTFILE "uImage" + +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "OMAPtest2430 # " + +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT V_PROMPT +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START (OMAP24XX_SDRC_CS0) /* memtest works on */ +#define CFG_MEMTEST_END (OMAP24XX_SDRC_CS0+SZ_31M) + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (OMAP24XX_SDRC_CS0) /* default load address */ + +/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by + * 32KHz clk, or from external sig. This rate is divided by a local divisor. + */ +#define V_PVT 7 /* use with 12MHz/128 */ +#define CFG_TIMERBASE OMAP24XX_GPT2 +#define CFG_PVT V_PVT /* 2^(pvt+1) */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE SZ_128K /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ +#define PHYS_SDRAM_1 OMAP24XX_SDRC_CS0 +#define PHYS_SDRAM_1_SIZE SZ_32M /* at least 32 meg */ +#define PHYS_SDRAM_2 OMAP24XX_SDRC_CS1 + +#define PHYS_FLASH_SECT_SIZE SZ_128K +#define PHYS_FLASH_1 FLASH_BASE /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE_1 SZ_32M +#define PHYS_FLASH_2 (FLASH_BASE+SZ_32M) /* same cs, 2 chips in series */ +#define PHYS_FLASH_SIZE_2 SZ_32M + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ +#define CFG_MONITOR_LEN SZ_128K /* Reserve 1 sector */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE + PHYS_FLASH_SIZE_1 } + +#ifdef CFG_NAND_BOOT +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x80000 /* environment starts here */ +#else +#define CFG_ENV_ADDR (CFG_FLASH_BASE + SZ_128K) +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE +#define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */ +#endif + + + + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (100*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (100*CFG_HZ) /* Timeout for Flash Write */ + +/* Flash banks JFFS2 should use */ +#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS+CFG_MAX_NAND_DEVICE) +#define CFG_JFFS2_MEM_NAND +#define CFG_JFFS2_FIRST_BANK 1 /* use flash_info[1] */ +#define CFG_JFFS2_NUM_BANKS 1 + +/* GPMC Settings */ +#ifdef CFG_NAND_BOOT +/* NAND */ +#define OMAP24XX_GPMC_CS0 SMNAND +#else +/* NOR */ +#define OMAP24XX_GPMC_CS0 STNOR +#endif + +#define OMAP24XX_GPMC_CS0_SIZE GPMC_SIZE_64M +#define OMAP24XX_GPMC_CS0_MAP CFG_FLASH_BASE + +#define OMAP24XX_GPMC_CS1 MPDB +#define OMAP24XX_GPMC_CS1_SIZE GPMC_SIZE_16M +#define OMAP24XX_GPMC_CS1_MAP DEBUG_BASE + +/* Other NAND Access APIs */ +#ifdef CFG_NAND_BOOT +#define WRITE_NAND_COMMAND(d, adr) do {*(volatile u16 *)(GPMC_NAND_CMD_0)= (d);} while(0) +#define WRITE_NAND_ADDRESS(d, adr) do {*(volatile u16 *)(GPMC_NAND_ADR_0) = (d);} while(0) +#define WRITE_NAND(d, adr) do {*(volatile u16 *)(GPMC_NAND_DAT_0)= (d);} while(0) +#define READ_NAND(adr) (*(volatile u16 *)(GPMC_NAND_DAT_0)) +#define NAND_WP_OFF() do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0) +#define NAND_WP_ON() do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0) +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) +#define NAND_DISABLE_CE(nand) +#define NAND_ENABLE_CE(nand) +#define NAND_WAIT_READY(nand) udelay(10) +#endif /* NAND Commands */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/omapv1030gsample.h b/include/configs/omapv1030gsample.h new file mode 100644 index 00000000000..c2371616554 --- /dev/null +++ b/include/configs/omapv1030gsample.h @@ -0,0 +1,181 @@ +/* + * (C) Copyright 2005 + * Texas Instruments. + * Jian Zhang <jzhang@ti.com> + * Configuation settings for the TI OMAPV1030 G-Sample board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#define CONFIG_INIT_CRITICAL /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM926EJS 1 /* This is an arm926ejs CPU core */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAPV1030 1 /* which is in an OMAPV1030 */ +#define CONFIG_GSAMPLE_OMAPV1030 1 /* a G-Sample Board */ + +/* input clock of PLL */ +/* G-Sample has 13MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 13000000 + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ +/* +*/ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE 0x08400300 +#define CONFIG_LAN91C96_EXT_PHY + +/* + * NS16550 Configuration + */ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK (48000000) /* can be 12M/32Khz or 48Mhz */ +#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ +#define CFG_NS16550_COM2 0xfffb0800 /* uart2, bluetooth uart on helen */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 2 /* we use SERIAL 2 on OMAPV1030 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 2 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +//#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> +#include <configs/omap1510.h> + + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd \ + root=/dev/nfs rw nfsroot=157.87.82.48:\ + /home/a0875451/mwd/myfs/target ip=dhcp" +#define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */ +#define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */ +#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */ +#define CONFIG_BOOTFILE "uImage" /* file to load */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "G-SAMPLE # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x10000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x10000000 /* default load address */ + +/* The OMAPV1030 has 3 MPU timers, they can be driven by the RefClk (13Mhz) or by + * DPLL1. This time is further subdivided by a local divisor. + */ +#define CFG_TIMERBASE 0xFFFEC500 /* use MPU timer 1 */ +#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#define PHYS_FLASH_1 0x0c000000 /* Flash Bank #1 */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define PHYS_FLASH_SIZE 0x02000000 /* 32MB */ +#define CFG_MAX_FLASH_SECT (259) /* max number of sectors on one chip */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ + +/* addr of environment */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_OFFSET 0x20000 /* environment starts here */ + +#define CFG_MAX_MTD_BANKS (CFG_MAX_FLASH_BANKS) + +#endif /* __CONFIG_H */ diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 831d018e2d4..aa0901f3ff4 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> @@ -71,9 +71,10 @@ * DDR SDRAM *----------------------------------------------------------------------*/ #define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0*/ -#define CFG_SDRAM_TABLE { \ - {(256 << 20), 0x000C4001}, /* 256MB mode 3, 13x10(4) */ \ - {(64 << 20), 0x00082001}} /* 64MB mode 2, 12x9(4) */ +#define CONFIG_SDRAM_ECC /* enable ECC support */ +#define CFG_SDRAM_TABLE { \ + {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \ + {(64 << 20), 12, 0x00082001}} /* 64MB mode 2, 12x9(4) */ /*----------------------------------------------------------------------- * Serial Port @@ -146,6 +147,7 @@ "cp.b 100000 fffc0000 40000;" \ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ + "unlock=yes\0" \ "" #define CONFIG_BOOTCOMMAND "run net_nfs" @@ -275,6 +277,9 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h new file mode 100644 index 00000000000..50c1c4fd4cb --- /dev/null +++ b/include/configs/pcs440ep.h @@ -0,0 +1,412 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * pcs440ep.h - configuration for PCS440EP board + ***********************************************************************/ +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_PCS440EP 1 /* Board is PCS440EP */ +#define CONFIG_440EP 1 /* Specific PPC440EP support */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ +#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ +#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */ +#define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + +/*Don't change either of these*/ +#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals*/ +#define CFG_PCI_BASE 0xe0000000 /* internal PCI regs*/ +/*Don't change either of these*/ + +#define CFG_USB_DEVICE 0x50000000 +#define CFG_BOOT_BASE_ADDR 0xf0000000 + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in SDRAM) + *----------------------------------------------------------------------*/ +#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */ +#define CFG_INIT_RAM_END (8 << 10) +#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK /* no external clk used */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SERIAL_MULTI 1 +/*define this if you want console on UART1*/ +#undef CONFIG_UART1_CONSOLE + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size (width) */ +#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ +#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#endif /* CFG_ENV_IS_IN_FLASH */ + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ +#undef CONFIG_DDR_ECC /* don't use ECC */ +#define SPD_EEPROM_ADDRESS {0x50} + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CFG_I2C_EEPROM_ADDR (0xa4>>1) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=pcs440ep\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "bootfile=/tftpboot/pcs440ep/uImage\0" \ + "kernel_addr=FFF00000\0" \ + "ramdisk_addr=FFF00000\0" \ + "load=tftp 100000 /tftpboot/pcs440ep/u-boot.bin\0" \ + "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \ + "cp.b 100000 FFFA0000 60000\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_NET_MULTI 1 /* required for netconsole */ +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ +#define CONFIG_PHY1_ADDR 2 + +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +#ifdef CONFIG_440EP +/* USB */ +#define CONFIG_USB_OHCI +#define CONFIG_USB_STORAGE + +/*Comment this out to enable USB 1.1 device*/ +#define USB_2_0_DEVICE +#endif /*CONFIG_440EP*/ + +#ifdef DEBUG +#define CONFIG_PANIC_HANG +#else +#define CONFIG_HW_WATCHDOG /* watchdog */ +#endif + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM | \ + CFG_CMD_EXT2 | \ + CFG_CMD_FAT | \ + CFG_CMD_USB ) + + +#define CONFIG_SUPPORT_VFAT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ +#define CONFIG_LYNXKDI 1 /* support kdi files */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0xFFF80000 /* FLASH bank #1 */ + +#define CFG_FLASH FLASH_BASE0_PRELIM +#define CFG_SRAM 0xF1000000 +#define CFG_FPGA 0xF2000000 +#define CFG_CF1 0xF0000000 +#define CFG_CF2 0xF0100000 + +/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x02010000 /* TWT=4,OEN=1 */ +#define CFG_EBC_PB0CR (CFG_FLASH | 0x18000) /* BS=1MB,BU=R/W,BW=8bit */ + +/* Memory Bank 1 (SRAM) initialization */ +#define CFG_EBC_PB1AP 0x01810040 /* TWT=3,OEN=1,BEM=1 */ +#define CFG_EBC_PB1CR (CFG_SRAM | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit */ + +/* Memory Bank 2 (FPGA) initialization */ +#define CFG_EBC_PB2AP 0x01010440 /* TWT=2,OEN=1,TH=2,BEM=1 */ +#define CFG_EBC_PB2CR (CFG_FPGA | 0x5A000) /* BS=4MB,BU=R/W,BW=16bit */ + +/* Memory Bank 3 (CompactFlash) initialization */ +#define CFG_EBC_PB3AP 0x080BD400 +#define CFG_EBC_PB3CR (CFG_CF1 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */ + +/* Memory Bank 4 (CompactFlash) initialization */ +#define CFG_EBC_PB4AP 0x080BD400 +#define CFG_EBC_PB4CR (CFG_CF2 | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */ + +/*----------------------------------------------------------------------- + * PPC440 GPIO Configuration + */ +#define CFG_440_GPIO_TABLE { /* GPIO Alternate1 Alternate2 Alternate3 */ \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO6 EBC_CS_N(1) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO7 EBC_CS_N(2) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO8 EBC_CS_N(3) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO9 EBC_CS_N(4) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO10 EBC_CS_N(5) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_SEL }, /* GPIO11 EBC_BUS_ERR */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO12 ZII_p0Rxd(0) */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO13 ZII_p0Rxd(1) */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO14 ZII_p0Rxd(2) */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO15 ZII_p0Rxd(3) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO16 ZII_p0Txd(0) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO17 ZII_p0Txd(1) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO18 ZII_p0Txd(2) */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO19 ZII_p0Txd(3) */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO20 ZII_p0Rx_er */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO21 ZII_p0Rx_dv */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO22 ZII_p0RxCrs */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO23 ZII_p0Tx_er */ \ +{ GPIO0_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO24 ZII_p0Tx_en */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO25 ZII_p0Col */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO26 USB2D_RXVALID */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO28 USB2D_TXVALID */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ +{ GPIO0_BASE, GPIO_IN, GPIO_SEL }, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ +}, \ +{ \ +/* GPIO Core 1 */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO32 USB2D_OPMODE0 */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO33 USB2D_OPMODE1 */ \ +{ GPIO1_BASE, GPIO_OUT, GPIO_ALT3 }, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT3 }, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO36 UART0_8PIN_CTS_N UART3_SIN*/ \ +{ GPIO1_BASE, GPIO_OUT, GPIO_ALT1 }, /* GPIO37 UART0_RTS_N */ \ +{ GPIO1_BASE, GPIO_OUT, GPIO_ALT2 }, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT2 }, /* GPIO39 UART0_RI_N UART1_SIN */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO40 UIC_IRQ(0) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO41 UIC_IRQ(1) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO42 UIC_IRQ(2) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO43 UIC_IRQ(3) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_ALT1 }, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ +{ GPIO1_BASE, GPIO_BI, GPIO_SEL }, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO49 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO50 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO51 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO52 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO53 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO54 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO55 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO56 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO57 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO58 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO59 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO60 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO61 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO62 Unselect via TraceSelect Bit */ \ +{ GPIO1_BASE, GPIO_IN, GPIO_SEL }, /* GPIO63 Unselect via TraceSelect Bit */ \ +} \ +} + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h new file mode 100644 index 00000000000..ba6b113d8c2 --- /dev/null +++ b/include/configs/pdnb3.h @@ -0,0 +1,307 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Configuation settings for the PDNB3 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_IXP425 1 /* This is an IXP425 CPU */ +#define CONFIG_PDNB3 1 /* on an PDNB3 board */ + +#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ +#define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ + +/* + * Ethernet + */ +#define CONFIG_IXP4XX_NPE 1 /* include IXP4xx NPE support */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_PHY_ADDR 16 /* NPE0 PHY address */ +#define CONFIG_HAS_ETH1 +#define CONFIG_PHY1_ADDR 18 /* NPE1 PHY address */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ + +/* + * Misc configuration options + */ +#define CONFIG_USE_IRQ 1 /* we need IRQ stuff for timer */ + +#define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */ +#define CFG_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */ + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (1 << 20) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 +#define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_DHCP | \ + CFG_CMD_DATE | \ + CFG_CMD_NET | \ + CFG_CMD_MII | \ + CFG_CMD_NAND | \ + CFG_CMD_I2C | \ + CFG_CMD_ELF | \ + CFG_CMD_PING) + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +/* These are u-boot generic parameters */ +#include <cmd_confdefs.h> + +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ +#define CFG_LOAD_ADDR 0x00010000 /* default load address */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*************************************************************** + * Platform/Board specific defines start here. + ***************************************************************/ + +/*----------------------------------------------------------------------- + * Default configuration (environment varibles...) + *----------------------------------------------------------------------*/ +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=pdnb3\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate} " \ + "mtdparts=${mtdparts}\0" \ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/buildroot\0" \ + "bootfile=/tftpboot/netbox/uImage\0" \ + "kernel_addr=50080000\0" \ + "ramdisk_addr=50200000\0" \ + "load=tftp 100000 /tftpboot/netbox/u-boot.bin\0" \ + "update=protect off 50000000 5007dfff;era 50000000 5007dfff;" \ + "cp.b 100000 50000000 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "ipaddr=10.0.0.233\0" \ + "serverip=10.0.0.152\0" \ + "netmask=255.255.0.0\0" \ + "ethaddr=c6:6f:13:36:f3:81\0" \ + "eth1addr=c6:6f:13:36:f3:82\0" \ + "mtdparts=IXP4XX-Flash.0:504k@0(uboot),4k@504k(env)," \ + "4k@508k(renv)\0" \ + "" +#define CONFIG_BOOTCOMMAND "run net_nfs" + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#define CFG_FLASH_BASE 0x50000000 +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MONITOR_LEN (504 << 10) /* Reserve 512 kB for Monitor */ + +/* + * Expansion bus settings + */ +#define CFG_EXP_CS0 0x94913C43 /* 8bit, max size */ +#define CFG_EXP_CS1 0x85000043 /* 8bit, 512bytes */ + +/* + * SDRAM settings + */ +#define CFG_SDR_CONFIG 0x18 +#define CFG_SDR_MODE_CONFIG 0x1 +#define CFG_SDRAM_REFRESH_CNT 0x81a + +/* + * FLASH and environment organization + */ +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_WORD_SIZE unsigned char /* flash word size (width) */ +#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ +#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ +/* + * The following defines are added for buggy IOP480 byte interface. + * All other boards should use the standard values (CPCI405 etc.) + */ +#define CFG_FLASH_READ0 0x0000 /* 0 is standard */ +#define CFG_FLASH_READ1 0x0001 /* 1 is standard */ +#define CFG_FLASH_READ2 0x0002 /* 2 is standard */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * NAND-FLASH stuff + */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CFG_NAND_BASE 0x51000000 /* NAND FLASH Base Address */ + +/* + * GPIO settings + */ + +/* FPGA program pin configuration */ +#define CFG_GPIO_PRG 12 /* FPGA program pin (cpu output)*/ +#define CFG_GPIO_CLK 10 /* FPGA clk pin (cpu output) */ +#define CFG_GPIO_DATA 14 /* FPGA data pin (cpu output) */ +#define CFG_GPIO_INIT 13 /* FPGA init pin (cpu input) */ +#define CFG_GPIO_DONE 11 /* FPGA done pin (cpu input) */ + +/* other GPIO's */ +#define CFG_GPIO_RESTORE_INT 0 +#define CFG_GPIO_RESTART_INT 1 +#define CFG_GPIO_SYS_RUNNING 2 +#define CFG_GPIO_PCI_INTA 3 +#define CFG_GPIO_PCI_INTB 4 +#define CFG_GPIO_I2C_SCL 6 +#define CFG_GPIO_I2C_SDA 7 +#define CFG_GPIO_FPGA_RESET 9 +#define CFG_GPIO_CLK_33M 15 + +/* + * I2C stuff + */ + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ + +#define CFG_I2C_SPEED 83000 /* 83 kHz is supposed to work */ +#define CFG_I2C_SLAVE 0xFE + +/* + * Software (bit-bang) I2C driver configuration + */ +#define PB_SCL (1 << CFG_GPIO_I2C_SCL) +#define PB_SDA (1 << CFG_GPIO_I2C_SDA) + +#define I2C_INIT GPIO_OUTPUT_ENABLE(CFG_GPIO_I2C_SCL) +#define I2C_ACTIVE GPIO_OUTPUT_ENABLE(CFG_GPIO_I2C_SDA) +#define I2C_TRISTATE GPIO_OUTPUT_DISABLE(CFG_GPIO_I2C_SDA) +#define I2C_READ ((*IXP425_GPIO_GPINR & PB_SDA) != 0) +#define I2C_SDA(bit) if (bit) GPIO_OUTPUT_SET(CFG_GPIO_I2C_SDA); \ + else GPIO_OUTPUT_CLEAR(CFG_GPIO_I2C_SDA) +#define I2C_SCL(bit) if (bit) GPIO_OUTPUT_SET(CFG_GPIO_I2C_SCL); \ + else GPIO_OUTPUT_CLEAR(CFG_GPIO_I2C_SCL) +#define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */ + +/* + * I2C RTC + */ +#define CONFIG_RTC_M41T11 1 +#define CFG_I2C_RTC_ADDR 0x68 +#define CFG_M41T11_BASE_YEAR 1900 /* play along with the linux driver */ + +/* + * Spartan3 FPGA configuration support + */ +#define CFG_FPGA_MAX_SIZE 700*1024 /* 700kByte for XC3S500E */ + +#define CFG_FPGA_PRG (1 << CFG_GPIO_PRG) /* FPGA program pin (cpu output)*/ +#define CFG_FPGA_CLK (1 << CFG_GPIO_CLK) /* FPGA clk pin (cpu output) */ +#define CFG_FPGA_DATA (1 << CFG_GPIO_DATA) /* FPGA data pin (cpu output) */ +#define CFG_FPGA_INIT (1 << CFG_GPIO_INIT) /* FPGA init pin (cpu input) */ +#define CFG_FPGA_DONE (1 << CFG_GPIO_DONE) /* FPGA done pin (cpu input) */ + +/* + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 32 + +#endif /* __CONFIG_H */ diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h new file mode 100644 index 00000000000..072b9dd5b46 --- /dev/null +++ b/include/configs/ppmc7xx.h @@ -0,0 +1,419 @@ +/* + * ppmc7xx.h + * --------- + * + * Wind River PPMC 7xx/74xx board configuration file. + * + * By Richard Danter (richard.danter@windriver.com) + * Copyright (C) 2005 Wind River Systems + */ + + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_PPMC7XX + + +/*=================================================================== + * + * User configurable settings - Modify to your preference + * + *=================================================================== + */ + +/* + * Debug + * + * DEBUG - Define this is you want extra debug info + * GTREGREAD - Required to build with debug + * do_bdinfo - Required to build with debug + */ + +#undef DEBUG +#define GTREGREAD(x) 0xFFFFFFFF +#define do_bdinfo(a,b,c,d) + + +/* + * CPU type + * + * CONFIG_7xx - We have a 750 or 755 CPU + * CONFIG_74xx - We have a 7400 CPU + * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400) + * CONFIG_BUS_CLK - System bus clock in Hz + */ + +#define CONFIG_7xx +#undef CONFIG_74xx +#undef CONFIG_ALTIVEC +#define CONFIG_BUS_CLK 66000000 + + +/* + * Monitor configuration + * + * CONFIG_COMMANDS - List of command sets to include in shell + * + * The following command sets have been tested and known to work: + * + * CFG_CMD_CACHE - Cache control commands + * CFG_CMD_MEMORY - Memory display, change and test commands + * CFG_CMD_FLASH - Erase and program flash + * CFG_CMD_ENV - Environment commands + * CFG_CMD_RUN - Run commands stored in env vars + * CFG_CMD_ELF - Load ELF files + * CFG_CMD_NET - Networking/file download commands + * CFG_CMD_PING - ICMP Echo Request command + * CFG_CMD_PCI - PCI Bus scanning command + */ + +#define CONFIG_COMMANDS ( (CFG_CMD_DFL & ~(CFG_CMD_KGDB)) | \ + CFG_CMD_FLASH | \ + CFG_CMD_ENV | \ + CFG_CMD_RUN | \ + CFG_CMD_ELF | \ + CFG_CMD_NET | \ + CFG_CMD_PING | \ + CFG_CMD_PCI) + + +/* + * Serial configuration + * + * CONFIG_CONS_INDEX - Serial console port number (COM1) + * CONFIG_BAUDRATE - Serial speed + */ + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 9600 + + +/* + * PCI config + * + * CONFIG_PCI - Enable PCI bus + * CONFIG_PCI_PNP - Enable Plug & Play support + * CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup + */ + +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#undef CONFIG_PCI_SCAN_SHOW + + +/* + * Network config + * + * CONFIG_NET_MULTI - Support for multiple network interfaces + * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller + * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM + */ + +#define CONFIG_NET_MULTI +#define CONFIG_EEPRO100 +#define CONFIG_EEPRO100_SROM_WRITE + + +/* + * Enable extra init functions + * + * CONFIG_MISC_INIT_F - Call pre-relocation init functions + * CONFIG_MISC_INIT_R - Call post relocation init functions + */ + +#undef CONFIG_MISC_INIT_F +#define CONFIG_MISC_INIT_R + + +/* + * Boot config + * + * CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot + * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec) + */ + +#define CONFIG_BOOTCOMMAND \ + "bootp;" \ + "setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \ + "bootm" +#define CONFIG_BOOTDELAY 5 + + +/*=================================================================== + * + * Board configuration settings - You should not need to modify these + * + *=================================================================== + */ + + +#include <cmd_confdefs.h> + + +/* + * Memory map + * + * This board runs in a standard CHRP (Map-B) configuration. + * + * Type Start End Size Width Chip Sel + * ----------- ----------- ----------- ------- ------- -------- + * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0 + * User LED's 0x78000000 RCS3 + * UART 0x7C000000 RCS2 + * Mailbox 0xFF000000 RCS1 + * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0 + * + * Flash sectors are laid out as follows. + * + * Sector Start End Size Comments + * ------- ----------- ----------- ------- ----------- + * 0 0xFFC00000 0xFFC3FFFF 256KB + * 1 0xFFC40000 0xFFC7FFFF 256KB + * 2 0xFFC80000 0xFFCBFFFF 256KB + * 3 0xFFCC0000 0xFFCFFFFF 256KB + * 4 0xFFD00000 0xFFD3FFFF 256KB + * 5 0xFFD40000 0xFFD7FFFF 256KB + * 6 0xFFD80000 0xFFDBFFFF 256KB + * 7 0xFFDC0000 0xFFDFFFFF 256KB + * 8 0xFFE00000 0xFFE3FFFF 256KB + * 9 0xFFE40000 0xFFE7FFFF 256KB + * 10 0xFFE80000 0xFFEBFFFF 256KB + * 11 0xFFEC0000 0xFFEFFFFF 256KB + * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here + * 13 0xFFF40000 0xFFF7FFFF 256KB + * 14 0xFFF80000 0xFFFBFFFF 256KB + * 15 0xFFFC0000 0xFFFDFFFF 128KB + * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here + * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here + * 18 0xFFFF0000 0xFFFFFFFF 64KB + */ + + +/* + * SDRAM config - see memory map details above. + * + * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero! + * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s) + */ + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 0x04000000 + + +/* + * Flash config - see memory map details above. + * + * CFG_FLASH_BASE - Start address of flash memory + * CFG_FLASH_SIZE - Total size of contiguous flash mem + * CFG_FLASH_ERASE_TOUT - Erase timeout in ms + * CFG_FLASH_WRITE_TOUT - Write timeout in ms + * CFG_MAX_FLASH_BANKS - Number of banks of flash on board + * CFG_MAX_FLASH_SECT - Number of sectors in a bank + */ + +#define CFG_FLASH_BASE 0xFFC00000 +#define CFG_FLASH_SIZE 0x00400000 +#define CFG_FLASH_ERASE_TOUT 250000 +#define CFG_FLASH_WRITE_TOUT 5000 +#define CFG_MAX_FLASH_BANKS 1 +#define CFG_MAX_FLASH_SECT 19 + + +/* + * Monitor config - see memory map details above + * + * CFG_MONITOR_BASE - Base address of monitor code + * CFG_MALLOC_LEN - Size of malloc pool (128KB) + */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MALLOC_LEN 0x20000 + + +/* + * Command shell settings + * + * CFG_BARGSIZE - Boot Argument buffer size + * CFG_BOOTMAPSZ - Size of app's mapped RAM at boot (Linux=8MB) + * CFG_CBSIZE - Console Buffer (input) size + * CFG_LOAD_ADDR - Default load address + * CFG_LONGHELP - Provide more detailed help + * CFG_MAXARGS - Number of args accepted by monitor commands + * CFG_MEMTEST_START - Start address of test to run on RAM + * CFG_MEMTEST_END - End address of RAM test + * CFG_PBSIZE - Print Buffer (output) size + * CFG_PROMPT - Prompt string + */ + +#define CFG_BARGSIZE 1024 +#define CFG_BOOTMAPSZ 0x800000 +#define CFG_CBSIZE 1024 +#define CFG_LOAD_ADDR 0x100000 +#define CFG_LONGHELP +#define CFG_MAXARGS 16 +#define CFG_MEMTEST_START 0x00040000 +#define CFG_MEMTEST_END 0x00040100 +#define CFG_PBSIZE 1024 +#define CFG_PROMPT "=> " + + +/* + * Environment config - see memory map details above + * + * CFG_ENV_IS_IN_FLASH - The env variables are stored in flash + * CFG_ENV_ADDR - Address of the sector containing env vars + * CFG_ENV_SIZE - Ammount of RAM for env vars (used to save RAM, 4KB) + * CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB) + */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0xFFFE0000 +#define CFG_ENV_SIZE 0x1000 +#define CFG_ENV_ADDR_REDUND 0xFFFE8000 +#define CFG_ENV_SIZE_REDUND 0x1000 +#define CFG_ENV_SECT_SIZE 0x8000 + + +/* + * Initial RAM config + * + * Since the main system RAM is initialised very early, we place the INIT_RAM + * in the main system RAM just above the exception vectors. The contents are + * copied to top of RAM by the init code. + * + * CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect + * CFG_INIT_RAM_END - Size of Init RAM + * CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data + * CFG_GBL_DATA_OFFSET - Start of global data, top of stack + */ + +#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000) +#define CFG_INIT_RAM_END 0x4000 +#define CFG_GBL_DATA_SIZE 128 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) + + +/* + * Initial BAT config + * + * BAT0 - System SDRAM + * BAT1 - LED's and Serial Port + * BAT2 - PCI Memory + * BAT3 - PCI I/O including Flash Memory + */ + +#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP) +#define CFG_DBAT0L CFG_IBAT0L +#define CFG_DBAT0U CFG_IBAT0U + +#define CFG_IBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) + +#define CFG_IBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT) +#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) +#define CFG_DBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) +#define CFG_DBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) + + +/* + * Cache config + * + * CFG_CACHELINE_SIZE - Size of a cache line (CPU specific) + * CFG_L2 - L2 cache enabled if defined + * L2_INIT - L2 cache init flags + * L2_ENABLE - L2 cache enable flags + */ + +#define CFG_CACHELINE_SIZE 32 +#undef CFG_L2 +#define L2_INIT 0 +#define L2_ENABLE 0 + + +/* + * Clocks config + * + * CFG_BUS_HZ - Bus clock frequency in Hz + * CFG_BUS_CLK - As above (?) + * CFG_HZ - Decrementer freq in Hz + */ + +#define CFG_BUS_HZ CONFIG_BUS_CLK +#define CFG_BUS_CLK CONFIG_BUS_CLK +#define CFG_HZ 1000 + + +/* + * Serial port config + * + * CFG_BAUDRATE_TABLE - List of valid baud rates + * CFG_NS16550 - Include the NS16550 driver + * CFG_NS16550_SERIAL - Include the serial (wrapper) driver + * CFG_NS16550_CLK - Frequency of reference clock + * CFG_NS16550_REG_SIZE - 64-bit accesses to 8-bit port + * CFG_NS16550_COM1 - Base address of 1st serial port + */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_CLK 3686400 +#define CFG_NS16550_REG_SIZE -8 +#define CFG_NS16550_COM1 0x7C000000 + + +/* + * PCI Config - Address Map B (CHRP) + */ + +#define CFG_PCI_MEMORY_BUS 0x00000000 +#define CFG_PCI_MEMORY_PHYS 0x00000000 +#define CFG_PCI_MEMORY_SIZE 0x40000000 +#define CFG_PCI_MEM_BUS 0x80000000 +#define CFG_PCI_MEM_PHYS 0x80000000 +#define CFG_PCI_MEM_SIZE 0x7D000000 +#define CFG_ISA_MEM_BUS 0x00000000 +#define CFG_ISA_MEM_PHYS 0xFD000000 +#define CFG_ISA_MEM_SIZE 0x01000000 +#define CFG_PCI_IO_BUS 0x00800000 +#define CFG_PCI_IO_PHYS 0xFE800000 +#define CFG_PCI_IO_SIZE 0x00400000 +#define CFG_ISA_IO_BUS 0x00000000 +#define CFG_ISA_IO_PHYS 0xFE000000 +#define CFG_ISA_IO_SIZE 0x00800000 +#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS +#define CFG_ISA_IO CFG_ISA_IO_PHYS +#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS + + +/* + * Extra init functions + * + * CFG_BOARD_ASM_INIT - Call assembly init code + */ + +#define CFG_BOARD_ASM_INIT + + +/* + * Boot flags + * + * BOOTFLAG_COLD - Indicates a power-on boot + * BOOTFLAG_WARM - Indicates a software reset + */ + +#define BOOTFLAG_COLD 0x01 +#define BOOTFLAG_WARM 0x02 + + +#endif /* __CONFIG_H */ diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 75792221024..d671dccc19b 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -279,7 +279,6 @@ #define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_REGINFO | \ CFG_CMD_MEMTEST | \ CFG_CMD_MII | \ diff --git a/include/configs/r5200.h b/include/configs/r5200.h new file mode 100644 index 00000000000..e1e406bf9b5 --- /dev/null +++ b/include/configs/r5200.h @@ -0,0 +1,169 @@ +/* + * Configuation settings for the R5200 board + * + * (C) Copyright 2006 Lab X Technologies <zachary.landau@labxtechnologies.com> + * Based on Motorola MC5272C3 board config + * (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _R5200_H +#define _R5200_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF52x2 /* define processor family */ +#define CONFIG_M5271 /* define processor type */ +#define CONFIG_R5200 /* define board type */ + +#define FEC_ENET +#define CONFIG_NET_RETRY_COUNT 5 + +#define CONFIG_IPADDR 192.168.0.172 +#define CONFIG_SERVERIP 192.168.0.148 +#define CONFIG_ETHADDR 00:06:3b:00:44:55 + +#define CONFIG_BAUDRATE 19200 +#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#define CONFIG_WATCHDOG +#define CONFIG_WATCHDOG_TIMEOUT 0xFFFF /* clock modulus */ + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#ifndef CONFIG_MONITOR_IS_IN_RAM +#define CFG_ENV_OFFSET 0x20000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_IS_EMBEDDED 1 +#else +#define CFG_ENV_ADDR 0xf0020000 +#define CFG_ENV_SECT_SIZE 0x2000 +#define CFG_ENV_IS_IN_FLASH 1 +#endif + +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PING | CFG_CMD_NET ) & ~(CFG_CMD_LOADS | CFG_CMD_LOADB)) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* Note: We only copy one sectors worth of application code from location + * 10200000 for speed purposes. Increase the size if necessary */ +#define CONFIG_BOOTCOMMAND "cp.b 10200000 0 20000; go 400" +#define CONFIG_BOOTDELAY 1 + +#define CFG_PROMPT "u-boot> " +#define CFG_LONGHELP /* undef to save memory */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x00002000 + +#define CFG_MEMTEST_START 0x400 +#define CFG_MEMTEST_END 0x380000 + +#define CFG_HZ 1000000 +#define CFG_CLK 100000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +#define CFG_MBAR 0x40000000 /* Register Base Addrs */ + +#define CFG_ENET_BD_BASE 0x480000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR 0x20000000 +#define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */ +#define CFG_FLASH_BASE 0x10000000 + +#ifdef CONFIG_MONITOR_IS_IN_RAM +#define CFG_MONITOR_BASE 0x20000 +#else +#define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) +#endif + +#define CFG_MONITOR_LEN 0x20001 +#define CFG_MALLOC_LEN (256 << 10) +#define CFG_BOOTPARAMS_LEN 64*1024 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */ +#define CFG_FLASH_ERASE_TOUT 1000 + +#define CFG_FLASH_CFI 1 +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_SIZE 0x800000 + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ + +/*----------------------------------------------------------------------- + * Port configuration + */ +#define CFG_FECI2C 0xF0 + +#endif /* _R5200_H */ diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 4e0cfdb4c36..97b52fa1ae7 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -507,7 +507,6 @@ # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_SPI | \ CFG_CMD_SDRAM | \ @@ -520,7 +519,6 @@ # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ELF | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_I2C | \ CFG_CMD_SPI | \ CFG_CMD_SDRAM | \ diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h new file mode 100644 index 00000000000..866f7b04261 --- /dev/null +++ b/include/configs/sbc2410x.h @@ -0,0 +1,239 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * Gary Jennejohn <gj@denx.de> + * David Mueller <d.mueller@elsoft.ch> + * + * Modified for the friendly-arm SBC-2410X by + * (C) Copyright 2005 + * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com> + * + * Configuation settings for the friendly-arm SBC-2410X board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start armboot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#undef CONFIG_SKIP_LOWLEVEL_INIT /* undef for developing */ + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ +#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */ + +/* input clock of PLL */ +#define CONFIG_SYS_CLK_FREQ 12000000/* the SBC2410X has 12MHz input clock */ + + +#define USE_920T_MMU 1 +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ +#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */ +#define CS8900_BASE 0x19000300 +#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SBC2410X */ + +/************************************************************ + * RTC + ************************************************************/ +#define CONFIG_RTC_S3C24X0 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +/*********************************************************** + * Command definition + ***********************************************************/ +#define CONFIG_COMMANDS \ + (CONFIG_CMD_DFL | \ + CFG_CMD_CACHE | \ + /*CFG_CMD_NAND |*/ \ + /*CFG_CMD_EEPROM |*/ \ + /*CFG_CMD_I2C |*/ \ + /*CFG_CMD_USB |*/ \ + CFG_CMD_REGINFO | \ + CFG_CMD_DATE | \ + CFG_CMD_PING | \ + CFG_CMD_DHCP | \ + CFG_CMD_ELF) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off" +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.0.69 +#define CONFIG_SERVERIP 192.168.0.1 +/*#define CONFIG_BOOTFILE "elinos-lart" */ +#define CONFIG_BOOTCOMMAND "dhcp; bootm" + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +/* what's this ? it's not used anywhere */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "[ ~ljh@GDLC ]# " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x30000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x33000000 /* default load address */ + +/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */ +/* it to wrap 100 times (total 1562500) to get 1 sec. */ +#define CFG_HZ 1562500 + +/* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +/* #define CONFIG_AMD_LV400 1 /\* uncomment this if you have a LV400 flash *\/ */ + +#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ + +#ifdef CONFIG_AMD_LV800 +#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ +#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */ +#endif + +#ifdef CONFIG_AMD_LV400 +#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ +#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */ +#endif + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ + +/*----------------------------------------------------------------------- + * NAND flash settings + */ +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define SECTORSIZE 512 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define NAND_WAIT_READY(nand) NF_WaitRB() +#define NAND_DISABLE_CE(nand) NF_SetCE(NFCE_HIGH) +#define NAND_ENABLE_CE(nand) NF_SetCE(NFCE_LOW) +#define WRITE_NAND_COMMAND(d, adr) NF_Cmd(d) +#define WRITE_NAND_COMMANDW(d, adr) NF_CmdW(d) +#define WRITE_NAND_ADDRESS(d, adr) NF_Addr(d) +#define WRITE_NAND(d, adr) NF_Write(d) +#define READ_NAND(adr) NF_Read() +/* the following functions are NOP's because S3C24X0 handles this in hardware */ +#define NAND_CTL_CLRALE(nandptr) +#define NAND_CTL_SETALE(nandptr) +#define NAND_CTL_CLRCLE(nandptr) +#define NAND_CTL_SETCLE(nandptr) +/* #undef CONFIG_MTD_NAND_VERIFY_WRITE */ +#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */ + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_TAG + +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CONFIG_CMDLINE_EDITING + +#ifdef CONFIG_CMDLINE_EDITING +#undef CONFIG_AUTO_COMPLETE +#else +#define CONFIG_AUTO_COMPLETE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index 180ce057d79..9cf0654be10 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -448,7 +448,6 @@ #ifdef CONFIG_ETHER_ON_FCC # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_ELF | \ CFG_CMD_I2C | \ CFG_CMD_IMMAP | \ @@ -459,7 +458,6 @@ #else # define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \ CFG_CMD_ASKENV | \ - CFG_CMD_ECHO | \ CFG_CMD_ELF | \ CFG_CMD_I2C | \ CFG_CMD_IMMAP | \ diff --git a/include/configs/smmaco4.h b/include/configs/smmaco4.h new file mode 100644 index 00000000000..e106b3b5746 --- /dev/null +++ b/include/configs/smmaco4.h @@ -0,0 +1,373 @@ +/* + * (C) Copyright 2003-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004-2005 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ +#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* Partitions */ +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_ISO_PARTITION + +/* POST support */ +#define CONFIG_POST (CFG_POST_MEMORY | \ + CFG_POST_CPU | \ + CFG_POST_I2C) + +#ifdef CONFIG_POST +#define CFG_CMD_POST_DIAG CFG_CMD_DIAG +/* preserve space for the post_word at end of on-chip SRAM */ +#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 +#else +#define CFG_CMD_POST_DIAG 0 +#endif + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_ECHO | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_MII | \ + CFG_CMD_NFS | \ + CFG_CMD_PING | \ + CFG_CMD_POST_DIAG | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SNTP ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_TIMESTAMP /* display image timestamps */ + +#if (TEXT_BASE == 0xFC000000) /* Boot low */ +# define CFG_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "bootfile=/tftpboot/smmaco4/uImage\0" \ + "load=tftp 200000 ${u-boot}\0" \ + "u-boot=/tftpboot/smmaco4/u-boot.bin\0" \ + "update=protect off FC000000 FC05FFFF;" \ + "erase FC000000 FC05FFFF;" \ + "cp.b 200000 FC000000 ${filesize};" \ + "protect on FC000000 FC05FFFF\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run net_nfs" + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +#if defined(CFG_IPBSPEED_133) +/* + * PCI Bus clocking configuration + * + * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if + * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't + * been tested with a IPB Bus Clock of 66 MHz. + */ +#define CFG_PCISPEED_66 /* define for 66MHz speed */ +#endif + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#ifdef CONFIG_TQM5200_REV100 +#define CFG_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */ +#else +#define CFG_I2C_MODULE 2 /* Select I2C module #2 for all other revs */ +#endif + +/* + * I2C clock frequency + * + * Please notice, that the resulting clock frequency could differ from the + * configured value. This is because the I2C clock is derived from system + * clock over a frequency divider with only a few divider values. U-boot + * calculates the best approximation for CFG_I2C_SPEED. However the calculated + * approximation allways lies below the configured value, never above. + */ +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work + * also). For other EEPROMs configuration should be verified. On Mini-FAP the + * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the + * same configuration could be used. + */ +#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 +#define CFG_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE TEXT_BASE /* 0xFC000000 */ + +/* use CFI flash driver if no module variant is spezified */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#undef CFG_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ + +#if !defined(CFG_LOWBOOT) +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00760000 + 0x00800000) +#else /* CFG_LOWBOOT */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x00060000) +#endif /* CFG_LOWBOOT */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +/* Dynamic MTD partition support */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=TQM5200-0" +#define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \ + "1408k(kernel)," \ + "2m(initrd)," \ + "4m(small-fs)," \ + "16m(big-fs)," \ + "8m(misc)" + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x20000 +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#define CFG_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +/* + * Define CONFIG_FEC_10MBIT to force FEC at 10Mb + */ +/* #define CONFIG_FEC_10MBIT 1 */ +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration + * + * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): + * Bit 0 (mask: 0x80000000): 1 + * use ALT CAN position: Bits 2-3 (mask: 0x30000000): + * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. + * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. + * Use for REV200 STK52XX boards. Do not use with REV100 modules + * (because, there I2C1 is used as I2C bus) + * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 + * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030) + * 000 -> All PSC2 pins are GIOPs + * 001 -> CAN1/2 on PSC2 pins + * Use for REV100 STK52xx boards + * use PSC6: + * on STK52xx: + * use as UART. Pins PSC6_0 to PSC6_3 are used. + * Bits 9:11 (mask: 0x00700000): + * 101 -> PSC6 : Extended POST test is not available + * on MINI-FAP and TQM5200_IB: + * use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000): + * 000 -> PSC6 could not be used as UART, CODEC or IrDA + * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST + * tests. + */ +#if defined (CONFIG_MINIFAP) +# define CFG_GPS_PORT_CONFIG 0x91000004 +#elif defined (CONFIG_STK52XX) +# if defined (CONFIG_STK52XX_REV100) +# define CFG_GPS_PORT_CONFIG 0x81500014 +# else /* STK52xx REV200 and above */ +# if defined (CONFIG_TQM5200_REV100) +# error TQM5200 REV100 not supported on STK52XX REV200 or above +# else/* TQM5200 REV200 and above */ +# define CFG_GPS_PORT_CONFIG 0x91500004 +# endif +# endif +#else /* TMQ5200 Inbetriebnahme-Board */ +# define CFG_GPS_PORT_CONFIG 0x81000004 +#endif + +/* + * RTC configuration + */ +#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +/* Enable an alternate, more extensive memory test */ +#define CFG_ALT_MEMTEST + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE +#else +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#ifdef CFG_PCISPEED_66 +#define CFG_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ +#else +#define CFG_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ +#endif +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ + +#define CFG_RESET_ADDRESS 0xff000000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h new file mode 100644 index 00000000000..9d3609a67d3 --- /dev/null +++ b/include/configs/spc1920.h @@ -0,0 +1,362 @@ +/* + * (C) Copyright 2006 + * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de + * + * Configuation settings for the SPC1920 board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __H +#define __CONFIG_H + +#define CONFIG_SPC1920 1 /* SPC1920 board */ +#define CONFIG_MPC885 1 /* MPC885 CPU */ + +#define CONFIG_8xx_CONS_SMC1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_NONE + +#define CONFIG_MII +/* #define MII_DEBUG */ +/* #define CONFIG_FEC_ENET */ +#undef CONFIG_ETHER_ON_FEC1 +#define CONFIG_ETHER_ON_FEC2 +#define FEC_ENET +/* #define CONFIG_FEC2_PHY_NORXERR */ +/* #define CFG_DISCOVER_PHY */ +/* #define CONFIG_PHY_ADDR 0x1 */ +#define CONFIG_FEC2_PHY 1 + +#define CONFIG_BAUDRATE 19200 + +/* use PLD CLK4 instead of brg */ +#undef CFG_SPC1920_SMC1_CLK4 + +#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ +#define CONFIG_8xx_CPUCLK_DEFAULT 50000000 +#define CFG_8xx_CPUCLK_MIN 40000000 +#define CFG_8xx_CPUCLK_MAX 133000000 + +#define CFG_RESET_ADDRESS 0xf8000000 + +#define CONFIG_BOARD_EARLY_INIT_F + + +#if 1 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_NFSBOOTCOMMAND \ + "dhcp;" \ + "setenv bootargs root=/dev/nfs rw nfsroot=$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \ + "bootm" + +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs root=/dev/mtdblock2 rw mtdparts=phys:1280K(ROM)ro,-(root) "\ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;" \ + "bootm fe080000" + +#undef CONFIG_BOOTARGS + +#undef CONFIG_WATCHDOG /* watchdog disabled */ +#define CONFIG_BZIP2 /* include support for bzip2 compressed images */ + +#ifndef CONFIG_COMMANDS +#define CONFIG_COMMANDS (CONFIG_CMD_DFL \ + | CFG_CMD_ASKENV \ + | CFG_CMD_ECHO \ + | CFG_CMD_IMMAP \ + | CFG_CMD_JFFS2 \ + | CFG_CMD_PING \ + | CFG_CMD_DHCP \ + | CFG_CMD_IMMAP \ + | CFG_CMD_MII) + /* & ~( CFG_CMD_NET)) */ + + +#endif /* !CONFIG_COMMANDS */ + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=>" /* Monitor Command Prompt */ +#define CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_LOAD_ADDR 0x00100000 + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 2400, 4800, 9600, 19200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xF0000000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */ + +#ifdef CONFIG_BZIP2 +#define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ +#else +#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */ +#endif /* CONFIG_BZIP2 */ + +#define CFG_ALLOC_DPRAM 1 /* use allocation routines */ + +/* + * Flash + */ +/*----------------------------------------------------------------------- + * Flash organisation + */ +#define CFG_FLASH_BASE 0xFE000000 +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */ +#define CFG_MAX_FLASH_SECT 128 /* Max num of sects on one chip */ + +/* Environment is in flash */ +#define CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) + +#define CONFIG_ENV_OVERWRITE + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ + +/*----------------------------------------------------------------------- + * I2C configuration + */ +#if (CONFIG_COMMANDS & CFG_CMD_I2C) +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */ +#define CFG_I2C_SLAVE 0x7F +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 +/* #define CFG_SCCR SCCR_TBS */ +#define CFG_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00) + +/*----------------------------------------------------------------------- + * DER - Debug Enable Register + *----------------------------------------------------------------------- + * Set to zero to prevent the processor from entering debug mode + */ +#define CFG_DER 0 + + +/* Because of the way the 860 starts up and assigns CS0 the entire + * address space, we have to set the memory controller differently. + * Normally, you write the option register first, and then enable the + * chip select by writing the base register. For CS0, you must write + * the base register first, followed by the option register. + */ + + +/* + * Init Memory Controller: + */ + +/* BR0 and OR0 (FLASH) */ +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ + + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ + +/* + * FLASH timing: + */ +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ + OR_SCY_3_CLK | OR_EHTR | OR_BI) + +#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) + + +/* + * SDRAM CS1 UPMB + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_BASE_PRELIM CFG_SDRAM_BASE +#define SDRAM_MAX_SIZE 0x4000000 /* max 64 MB */ + +#define CFG_PRELIM_OR1_AM 0xF0000000 +/* #define CFG_OR1_TIMING OR_CSNT_SAM/\* | OR_G5LS /\\* *\\/ *\/ */ +#define SDRAM_TIMING OR_SCY_0_CLK /* SDRAM-Timing */ + +#define CFG_OR1_PRELIM (CFG_PRELIM_OR1_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING) +#define CFG_BR1_PRELIM ((CFG_SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V) + +/* #define CFG_OR1_FINAL ((CFG_OR1_AM & OR_AM_MSK) | CFG_OR1_TIMING) */ +/* #define CFG_BR1_FINAL ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) */ + +#define CFG_PTB_PER_CLK ((4096 * 16 * 1000) / (4 * 64)) +#define CFG_PTA_PER_CLK 195 +#define CFG_MBMR_PTB 195 +#define CFG_MPTPR MPTPR_PTP_DIV16 +#define CFG_MAR 0x88 + +#define CFG_MBMR_8COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \ + MBMR_AMB_TYPE_0 | \ + MBMR_G0CLB_A10 | \ + MBMR_DSB_1_CYCL | \ + MBMR_RLFB_1X | \ + MBMR_WLFB_1X | \ + MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */ + +#define CFG_MBMR_9COL ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \ + MBMR_AMB_TYPE_1 | \ + MBMR_G0CLB_A10 | \ + MBMR_DSB_1_CYCL | \ + MBMR_RLFB_1X | \ + MBMR_WLFB_1X | \ + MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */ + + +/* PLD CS5 */ +#define CFG_SPC1920_PLD_BASE 0x80000000 +#define CFG_PRELIM_OR5_AM 0xffff8000 + +#define CFG_OR5_PRELIM (CFG_PRELIM_OR5_AM | \ + OR_CSNT_SAM | \ + OR_ACS_DIV1 | \ + OR_BI | \ + OR_SCY_0_CLK | \ + OR_TRLX) + +#define CFG_BR5_PRELIM ((CFG_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); + +/* #define CFG_PLD_BASE 0x30000000 */ +/* #define CFG_OR5_PRELIM 0xffff1110 */ +/* #define CFG_BR5_PRELIM 0x30000401 */ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* Machine type +*/ +#define _MACH_8xx (_MACH_fads) + +#endif /* __CONFIG_H */ diff --git a/include/configs/spieval.h b/include/configs/spieval.h index 96cb6e4c7af..f40dde2ac83 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -191,16 +191,6 @@ #undef CONFIG_BOOTARGS -#if defined (CONFIG_TQM5200_AA) -# define CONFIG_U_BOOT_SUFFIX "-AA\0" -#elif defined (CONFIG_TQM5200_AB) -# define CONFIG_U_BOOT_SUFFIX "-AB\0" -#elif defined (CONFIG_TQM5200_AC) -# define CONFIG_U_BOOT_SUFFIX "-AC\0" -#else -# define CONFIG_U_BOOT_SUFFIX "\0" -#endif - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ @@ -217,7 +207,7 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "bootfile=/tftpboot/tqm5200/uImage\0" \ "load=tftp 200000 ${u-boot}\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin" CONFIG_U_BOOT_SUFFIX \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ "update=protect off FC000000 FC05FFFF;" \ "erase FC000000 FC05FFFF;" \ "cp.b 200000 FC000000 ${filesize};" \ @@ -283,13 +273,6 @@ #endif /* List of I2C addresses to be verified by POST */ -#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB) -#define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ - CFG_I2C_SLAVE } -#elif defined (CONFIG_TQM5200_AC) -#define I2C_ADDR_LIST { CFG_I2C_SLAVE } -#endif - #if defined (CONFIG_MINIFAP) #undef I2C_ADDR_LIST #define I2C_ADDR_LIST { CFG_I2C_EEPROM_ADDR, \ @@ -469,37 +452,25 @@ #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE -/* automatic configuration of chip selects */ -#ifdef CONFIG_CS_AUTOCONF #define CONFIG_LAST_STAGE_INIT -#endif /* * SRAM - Do not map below 2 GB in address space, because this area is used * for SDRAM autosizing. */ -#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF) #define CFG_CS2_START 0xE5000000 -#ifdef CONFIG_TQM5200_AB -#define CFG_CS2_SIZE 0x80000 /* 512 kByte */ -#else /* CONFIG_CS_AUTOCONF */ #define CFG_CS2_SIZE 0x100000 /* 1 MByte */ -#endif #define CFG_CS2_CFG 0x0004D930 -#endif /* * Grafic controller - Do not map below 2 GB in address space, because this * area is used for SDRAM autosizing. */ -#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \ - defined (CONFIG_CS_AUTOCONF) #define SM501_FB_BASE 0xE0000000 #define CFG_CS1_START (SM501_FB_BASE) #define CFG_CS1_SIZE 0x4000000 /* 64 MByte */ #define CFG_CS1_CFG 0x8F48FF70 #define SM501_MMIO_BASE CFG_CS1_START + 0x03E00000 -#endif #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ diff --git a/include/configs/stamp.h b/include/configs/stamp.h new file mode 100644 index 00000000000..248ca70de0c --- /dev/null +++ b/include/configs/stamp.h @@ -0,0 +1,333 @@ +/* + * U-boot - stamp.h Configuration file for STAMP board + * having BF533 processor + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_STAMP_H__ +#define __CONFIG_STAMP_H__ + +/* + * Board settings + * + */ + +#define __ADSPLPBLACKFIN__ 1 +#define __ADSPBF533__ 1 +#define CONFIG_STAMP 1 +#define CONFIG_RTC_BF533 1 + +/* FLASH/ETHERNET uses the same address range */ +#define SHARED_RESOURCES 1 + +#define CONFIG_VDSP 1 + +/* + * Clock settings + * + */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 11059200 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 45 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 6 + +/* + * Network Settings + */ +/* network support */ +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME STAMP +#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs + +/* To remove hardcoding and enable MAC storage in EEPROM */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ + +/* + * Command settings + * + */ + +#define CFG_LONGHELP 1 + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ +#define CONFIG_BOOTCOMMAND "run ramboot" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DATE) +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):eth0:off\0" \ + "ramboot=tftpboot 0x1000000 linux;" \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot 0x1000000 linux;" \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "" + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Console settings + * + */ + +#define CONFIG_BAUDRATE 57600 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_PROMPT "stamp>" /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_LOADS_ECHO 1 + +/* + * Network settings + * + */ + +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20300300 +/* To remove hardcoding and enable MAC storage in EEPROM */ +/* #define HARDCODE_MAC 1 */ + +/* + * Flash settings + * + */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET + +#define CFG_ENV_IS_IN_FLASH 1 + +#define CFG_FLASH_BASE 0x20000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ + +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ + +#define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */ +#define CFG_FLASH_ERASEBLOCK_TOUT 5000 /* Timeout for Block Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + +/* + * following timeouts shall be used once the + * Flash real protection is enabled + */ +#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ + +/* + * I2C settings + * By default PF2 is used as SDA and PF3 as SCL on the Stamp board + */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF3 +#define PF_SDA PF2 + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE + +/* + * Compact Flash settings + */ + +/* Enabled below option for CF support */ +/* #define CONFIG_STAMP_CF 1 */ + +#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE) + +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_DOS_PARTITION 1 + +/* + * IDE/ATA stuff + */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ + +#define CFG_ATA_BASE_ADDR 0x20200000 +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */ + +#define CFG_ATA_STRIDE 2 +#endif + +/* + * SDRAM settings + * + */ + +#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC64M4A2FB_7E 1 + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x07EFFFFF /* 1 ... 127 MB in DRAM */ +#define CFG_LOAD_ADDR 0x01000000 /* default load address */ + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE 0x08000000 + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HZ 1000 /* 1ms time tick */ + +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +#define CFG_LARGE_IMAGE_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +/* + * FLASH organization and environment definitions + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ +/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ + B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) +#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ + B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) +*/ +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0xBBC3BBC3 +#define AMBCTL1VAL 0x99B39983 +#define CF_AMBCTL1VAL 0x99B3ffc2 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index 3ffe6b2e05f..614a046105c 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -436,6 +436,7 @@ /****************************************************************/ /* NAND */ +#define CFG_NAND_LEGACY #define CFG_NAND_BASE NAND_BASE #define CONFIG_MTD_NAND_ECC_JFFS2 #define CONFIG_MTD_NAND_VERIFY_WRITE @@ -584,5 +585,7 @@ typedef unsigned int led_id_t; #define OF_CPU "PowerPC,MPC870@0" #define OF_TBCLK (MPC8XX_HZ / 16) +#define CONFIG_OF_HAS_BD_T 1 +#define CONFIG_OF_HAS_UBOOT_ENV 1 #endif /* __CONFIG_H */ diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 7118f3f74be..92ee8cb3331 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -141,6 +141,7 @@ /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> +#define CFG_NAND_LEGACY /* * Miscellaneous configurable options diff --git a/include/configs/trab.h b/include/configs/trab.h index 85ee756e05f..a2dc8e7bff8 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -160,7 +160,6 @@ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ CFG_CMD_FAT | \ - CFG_CMD_JFFS2 | \ CFG_CMD_NFS | \ CFG_CMD_SNTP | \ CFG_CMD_USB ) @@ -174,7 +173,6 @@ CFG_CMD_DATE | \ CFG_CMD_DHCP | \ CFG_CMD_FAT | \ - CFG_CMD_JFFS2 | \ CFG_CMD_NFS | \ CFG_CMD_SNTP | \ CFG_CMD_USB ) @@ -384,10 +382,10 @@ #define MTDIDS_DEFAULT "nor0=0" /* production flash layout */ -#define MTDPARTS_DEFAULT "mtdparts=0:32k(Firmware1)ro," \ +#define MTDPARTS_DEFAULT "mtdparts=0:16k(Firmware1)ro," \ "16k(Env1)," \ "16k(Env2)," \ - "320k(Firmware2)ro," \ + "336k(Firmware2)ro," \ "896k(Kernel)," \ "5376k(Root-FS)," \ "1408k(JFFS2)," \ @@ -404,7 +402,7 @@ #endif /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_ERASE_TOUT (15*CFG_HZ) /* Timeout for Flash Erase */ #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ #define CFG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index d312b6559ad..e5d4397d2c7 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -91,7 +91,6 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" | CFG_CMD_ENV | CFG_CMD_CONSOLE \ | CFG_CMD_LOADS | CFG_CMD_LOADB \ | CFG_CMD_IMI | CFG_CMD_CACHE \ - | CFG_CMD_RUN | CFG_CMD_ECHO \ | CFG_CMD_REGINFO | CFG_CMD_NET\ | CFG_CMD_DHCP | CFG_CMD_I2C \ | CFG_CMD_DATE) diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h new file mode 100644 index 00000000000..06d8536ec31 --- /dev/null +++ b/include/configs/virtlab2.h @@ -0,0 +1,461 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ +#define CONFIG_VIRTLAB2 1 /* ...on a virtlab2 module */ +#define CONFIG_TQM8xxL 1 + +#ifdef CONFIG_LCD /* with LCD controller ? */ +#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/ +#endif + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_NONE +#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ + +#define CONFIG_BOOTCOUNT_LIMIT + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_BOARD_TYPES 1 /* support board types */ + +#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_8xx\0" \ + "bootfile=/tftpboot/TQM823L/uImage\0" \ + "kernel_addr=40040000\0" \ + "ramdisk_addr=40100000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +#if defined(CONFIG_LCD) +# undef CONFIG_STATUS_LED /* disturbs display */ +#else +# define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#endif /* CONFIG_LCD */ + +#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) + +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION + +#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ + +#ifdef CONFIG_SPLASH_SCREEN +# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_BMP | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_IDE | \ + CFG_CMD_NFS | \ + CFG_CMD_SNTP ) +#else +# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_IDE | \ + CFG_CMD_NFS | \ + CFG_CMD_SNTP ) +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if 0 +#define CFG_HUSH_PARSER 1 /* use "hush" command parser */ +#endif +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT_HUSH_PS2 "> " +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CFG_IMMR 0xFFF00000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CFG_INIT_RAM_ADDR CFG_IMMR +#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ +#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + */ +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0x40000000 +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE CFG_FLASH_BASE +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * Hardware Information Block + */ +#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ +#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */ +#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#ifndef CONFIG_CAN_DRIVER +#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#else /* we must activate GPL5 in the SIUMCR for CAN */ +#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#endif /* CONFIG_CAN_DRIVER */ + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + */ +#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CFG_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit + */ +#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF11 +#define CFG_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ + SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ + SCCR_DFALCD00) + +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + * + */ +#define CFG_PCMCIA_MEM_ADDR (0xE0000000) +#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_DMA_ADDR (0xE4000000) +#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000) +#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 ) +#define CFG_PCMCIA_IO_ADDR (0xEC000000) +#define CFG_PCMCIA_IO_SIZE ( 64 << 20 ) + +/*----------------------------------------------------------------------- + * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) + *----------------------------------------------------------------------- + */ + +#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x0100 + +/*----------------------------------------------------------------------- + * + *----------------------------------------------------------------------- + * + */ +#define CFG_DER 0 + +/* + * Init Memory Controller: + * + * BR0/1 and OR0/1 (FLASH) + */ + +#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ +#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ + +/* used to re-map FLASH both when starting from SRAM or FLASH: + * restrict access enough to keep SRAM working (if any) + * but not too much to meddle with FLASH accesses + */ +#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */ +#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ + +/* + * FLASH timing: + */ +#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ + OR_SCY_3_CLK | OR_EHTR | OR_BI) + +#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) +#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) + +#define CFG_OR1_REMAP CFG_OR0_REMAP +#define CFG_OR1_PRELIM CFG_OR0_PRELIM +#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V ) + +/* + * BR2/3 and OR2/3 (SDRAM) + * + */ +#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ +#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */ +#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ + +/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ +#define CFG_OR_TIMING_SDRAM 0x00000A00 + +#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM ) +#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) + +#ifndef CONFIG_CAN_DRIVER +#define CFG_OR3_PRELIM CFG_OR2_PRELIM +#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) +#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */ +#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */ +#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */ +#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI) +#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \ + BR_PS_8 | BR_MS_UPMB | BR_V ) +#endif /* CONFIG_CAN_DRIVER */ + +/* + * Memory Periodic Timer Prescaler + * + * The Divider for PTA (refresh timer) configuration is based on an + * example SDRAM configuration (64 MBit, one bank). The adjustment to + * the number of chip selects (NCS) and the actually needed refresh + * rate is done by setting MPTPR. + * + * PTA is calculated from + * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) + * + * gclk CPU clock (not bus clock!) + * Trefresh Refresh cycle * 4 (four word bursts used) + * + * 4096 Rows from SDRAM example configuration + * 1000 factor s -> ms + * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration + * 4 Number of refresh cycles per period + * 64 Refresh cycle in ms per number of rows + * -------------------------------------------- + * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 + * + * 50 MHz => 50.000.000 / Divider = 98 + * 66 Mhz => 66.000.000 / Divider = 129 + * 80 Mhz => 80.000.000 / Divider = 156 + */ + +#define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64)) +#define CFG_MAMR_PTA 98 + +/* + * For 16 MBit, refresh rates could be 31.3 us + * (= 64 ms / 2K = 125 / quad bursts). + * For a simpler initialization, 15.6 us is used instead. + * + * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks + * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank + */ +#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ + +/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ +#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ +#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ + +/* + * MAMR settings for SDRAM + */ + +/* 8 column SDRAM */ +#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) +/* 9 column SDRAM */ +#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) + + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* Map peripheral control registers on CS4 */ +#define CFG_PERIPHERAL_BASE 0xA0000000 +#define CFG_PERIPHERAL_OR_AM 0xFFFF8000 /* 32 kB address mask */ +#define CFG_OR4_PRELIM (CFG_PERIPHERAL_OR_AM | OR_TRLX | OR_CSNT_SAM | \ + OR_SCY_2_CLK) +#define CFG_BR4_PRELIM ((CFG_PERIPHERAL_BASE & BR_BA_MSK) | BR_PS_8 | BR_V) +#define PCMCIA_CTRL (CFG_PERIPHERAL_BASE + 0xB00) +#endif /* __CONFIG_H */ diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index c5ee78ff4d7..4e97b01aa1a 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -47,6 +47,8 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + /* * Physical Memory Map */ @@ -94,7 +96,6 @@ #define CONFIG_ENV_OVERWRITE -#define CFG_JFFS_CUSTOM_PART /* see board/voiceblue/jffs2parts.c */ #endif /* @@ -104,9 +105,11 @@ #ifdef VOICEBLUE_SMALL_FLASH #define CFG_MALLOC_LEN (SZ_64K - CFG_GBL_DATA_SIZE) #define CONFIG_STACKSIZE SZ_8K +#define PHYS_SDRAM_1_RESERVED 0 #else #define CFG_MALLOC_LEN SZ_4M #define CONFIG_STACKSIZE SZ_1M +#define PHYS_SDRAM_1_RESERVED (CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE) #endif /* @@ -174,6 +177,7 @@ #define CONFIG_BOOTCOMMAND "run nboot" #define CONFIG_PREBOOT "run setup" #define CONFIG_EXTRA_ENV_SETTINGS \ + "silent=1\0" \ "ospart=0\0" \ "swapos=no\0" \ "setpart=" \ @@ -185,15 +189,37 @@ "fi\0" \ "setup=setenv bootargs console=ttyS0,$baudrate " \ "mtdparts=$mtdparts\0" \ - "nfsargs=run setpart; setenv bootargs $bootargs " \ - "root=/dev/nfs ip=dhcp\0" \ + "nfsargs=setenv bootargs $bootargs " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ + "nfsroot=$rootpath root=/dev/nfs\0" \ "flashargs=run setpart; setenv bootargs $bootargs " \ "root=/dev/mtdblock$partition ro " \ "rootfstype=jffs2\0" \ - "nboot=run nfsargs; bootp; tftp; bootm\0" \ - "fboot=run flashargs; fsload /boot/uImage; bootm\0" + "initrdargs=setenv bootargs $bootargs " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ + "fboot=run flashargs; fsload /boot/uImage; bootm\0" \ + "iboot=bootp; run initrdargs; tftp; bootm\0" \ + "nboot=bootp; run nfsargs; tftp; bootm\0" #endif +#ifndef VOICEBLUE_SMALL_FLASH +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ + +#if 1 /* feel free to disable for development */ +#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ +#define CONFIG_AUTOBOOT_PROMPT "\nVoiceBlue Enterprise - booting...\n" +#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */ +#endif + +/* + * JFFS2 partitions (mtdparts command line support) + */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=omapflash.0" +#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:128k(uboot),64k(env),64k(r_env),16256k(data1),-(data2)" + +#endif /* VOICEBLUE_SMALL_FLASH */ + /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -213,7 +239,7 @@ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_MEMTEST_START PHYS_SDRAM_1 -#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE +#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ @@ -247,22 +273,4 @@ #define VOICEBLUE_LED_REG 0x04030000 -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition */ -#undef CONFIG_JFFS2_CMDLINE -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00040000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_JFFS2_CMDLINE -#define MTDIDS_DEFAULT "nor0=voiceblue-0" -#define MTDPARTS_DEFAULT "mtdparts=voiceblue-0:128k(uboot),64k(env),64k(renv),-(jffs2)" -*/ - #endif /* __CONFIG_H */ diff --git a/include/configs/xm250.h b/include/configs/xm250.h index 952f73b43d1..825bfd14e93 100644 --- a/include/configs/xm250.h +++ b/include/configs/xm250.h @@ -119,9 +119,9 @@ /* * Definitions related to passing arguments to kernel. */ -#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ -#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ -#undef CONFIG_INITRD_TAG /* do not send initrd params */ +#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */ +#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */ +#define CONFIG_INITRD_TAG 1 /* do not send initrd params */ #undef CONFIG_VFD /* do not send framebuffer setup */ /* diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h index d3e9671bc31..7d555665ec8 100644 --- a/include/configs/yellowstone.h +++ b/include/configs/yellowstone.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -174,7 +174,7 @@ "rootpath=/opt/eldk/ppc_4xx\0" \ "bootfile=/tftpboot/yellowstone/uImage\0" \ "kernel_addr=fc000000\0" \ - "ramdisk_addr=fc100000\0" \ + "ramdisk_addr=fc180000\0" \ "load=tftp 100000 /tftpboot/yellowstone/u-boot.bin\0" \ "update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \ "cp.b 100000 fff80000 80000;" \ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index a67b834866b..a81cf34f11d 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -109,6 +109,8 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ + #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #ifdef CFG_ENV_IS_IN_FLASH @@ -174,7 +176,7 @@ "rootpath=/opt/eldk/ppc_4xx\0" \ "bootfile=/tftpboot/yosemite/uImage\0" \ "kernel_addr=fc000000\0" \ - "ramdisk_addr=fc100000\0" \ + "ramdisk_addr=fc180000\0" \ "load=tftp 100000 /tftpboot/yosemite/u-boot.bin\0" \ "update=protect off fff80000 ffffffff;era fff80000 ffffffff;" \ "cp.b 100000 fff80000 80000;" \ diff --git a/include/configs/yucca.h b/include/configs/yucca.h new file mode 100644 index 00000000000..0e58e7e1024 --- /dev/null +++ b/include/configs/yucca.h @@ -0,0 +1,526 @@ +/* + * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * 1 january 2005 Alain Saurel <asaurel@amcc.com> + * Adapted to current Das U-Boot source + ***********************************************************************/ +/************************************************************************ + * yucca.h - configuration for AMCC 440SPe Ref (yucca) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define DEBUG +#undef DEBUG + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_440SPE 1 /* Specifc SPe support */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#undef CFG_DRAM_TEST /* Disable-takes long time */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ +#define EXTCLK_33_33 33333333 +#define EXTCLK_66_66 66666666 +#define EXTCLK_50 50000000 +#define EXTCLK_83 83333333 + +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#undef CONFIG_SHOW_BOOT_PROGRESS +#undef CONFIG_STRESS +#undef ENABLE_ECC +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */ +#define CFG_MONITOR_BASE 0xfffb0000 /* start of monitor */ +#define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ +#define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */ + +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE1 0x90000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE2 0xa0000000 /* mapped pci memory */ +#define CFG_PCI_MEMBASE3 0xb0000000 /* mapped pci memory */ + +#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ +#define CFG_PCI_TARGBASE 0x80000000 /*PCIaddr mapped to CFG_PCI_MEMBASE*/ + +/* #define CFG_PCI_BASE_IO 0xB8000000 */ /* internal PCI I-O */ +/* #define CFG_PCI_BASE_REGS 0xBEC00000 */ /* internal PCI regs */ +/* #define CFG_PCI_BASE_CYCLE 0xBED00000 */ /* internal PCI regs */ + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) + +#define CFG_FPGA_BASE 0xe2000000 /* epld */ +#define CFG_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */ + +/* #define CFG_NVRAM_BASE_ADDR 0x08000000 */ +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in internal SRAM) + *----------------------------------------------------------------------*/ +#define CFG_TEMP_STACK_OCM 1 +#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE +#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ + +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR + +#define CFG_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CONFIG_SERIAL_MULTI 1 +#undef CONFIG_UART1_CONSOLE + +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CFG_EXT_SERIAL_CLOCK +/* #define CFG_EXT_SERIAL_CLOCK (1843200 * 6) */ /* Ext clk @ 11.059 MHz */ + +#define CONFIG_BAUDRATE 115200 + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses */ +#define IIC0_DIMM0_ADDR 0x53 +#define IIC0_DIMM1_ADDR 0x52 + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define IIC0_BOOTPROM_ADDR 0x50 +#define IIC0_ALT_BOOTPROM_ADDR 0x54 + +/* Don't probe these addrs */ +#define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54} + +/* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */ +/* #define CFG_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */ +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ +/* #endif */ + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +/* #define CFG_NVRAM_SIZE (0x2000 - 8) */ /* NVRAM size(8k)- RTC regs */ + +#undef CFG_ENV_IS_IN_NVRAM /* ... not in NVRAM */ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment uses flash */ +#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ +#define CONFIG_ENV_OVERWRITE 1 + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=yucca\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "bootfile=yucca/uImage\0" \ + "kernel_addr=E7F10000\0" \ + "ramdisk_addr=E7F20000\0" \ + "load=tftp 100000 yuca/u-boot.bin\0" \ + "update=protect off 2:4-7;era 2:4-7;" \ + "cp.b ${fileaddr} FFFB0000 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_MII 1 /* MII PHY management */ +#undef CONFIG_NET_MULTI +#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ +#define CONFIG_HAS_ETH0 +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET_DELAY 1000 +#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_MAX_FLASH_BANKS 3 /* number of banks */ +#define CFG_MAX_FLASH_SECT 256 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_ADDR0 0x5555 +#define CFG_FLASH_ADDR1 0x2aaa +#define CFG_FLASH_WORD_SIZE unsigned char + +#define CFG_FLASH_2ND_16BIT_DEV 1 /* evb440SPe has 8 and 16bit device */ +#define CFG_FLASH_2ND_ADDR 0xe7c00000 /* evb440SPe has 8 and 16bit device*/ + +#ifdef CFG_ENV_IS_IN_FLASH +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR 0xfffa0000 +/* #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) */ +#define CFG_ENV_SIZE 0x10000 /* Size of Environment vars */ +#endif /* CFG_ENV_IS_IN_FLASH */ +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#undef CONFIG_PCI_CONFIG_HOST_BRIDGE + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT /* let board init pci target */ +#undef CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ +/* #define CFG_PCI_SUBSYS_ID CFG_PCI_SUBSYS_DEVICEID */ + +/* + * NETWORK Support (PCI): + */ +/* Support for Intel 82557/82559/82559ER chips. */ +#define CONFIG_EEPRO100 +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /*Initial Memory map for Linux*/ +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* FB Divisor selection */ +#define FPGA_FB_DIV_6 6 +#define FPGA_FB_DIV_10 10 +#define FPGA_FB_DIV_12 12 +#define FPGA_FB_DIV_20 20 + +/* VCO Divisor selection */ +#define FPGA_VCO_DIV_4 4 +#define FPGA_VCO_DIV_6 6 +#define FPGA_VCO_DIV_8 8 +#define FPGA_VCO_DIV_10 10 + +/*----------------------------------------------------------------------------+ +| FPGA registers and bit definitions ++----------------------------------------------------------------------------*/ +/* PowerPC 440SPe Board FPGA is reached with physical address 0x1 E2000000. */ +/* TLB initialization makes it correspond to logical address 0xE2000000. */ +/* => Done init_chip.s in bootlib */ +#define FPGA_REG_BASE_ADDR 0xE2000000 +#define FPGA_GPIO_BASE_ADDR 0xE2010000 +#define FPGA_INT_BASE_ADDR 0xE2020000 + +/*----------------------------------------------------------------------------+ +| Display ++----------------------------------------------------------------------------*/ +#define PPC440SPE_DISPLAY FPGA_REG_BASE_ADDR + +#define PPC440SPE_DISPLAY_D8 (FPGA_REG_BASE_ADDR+0x06) +#define PPC440SPE_DISPLAY_D4 (FPGA_REG_BASE_ADDR+0x04) +#define PPC440SPE_DISPLAY_D2 (FPGA_REG_BASE_ADDR+0x02) +#define PPC440SPE_DISPLAY_D1 (FPGA_REG_BASE_ADDR+0x00) +/*define WRITE_DISPLAY_DIGIT(n) IOREG8(FPGA_REG_BASE_ADDR + (2*n))*/ +/*#define IOREG8(addr) *((volatile unsigned char *)(addr))*/ + +/*----------------------------------------------------------------------------+ +| ethernet/reset/boot Register 1 ++----------------------------------------------------------------------------*/ +#define FPGA_REG10 (FPGA_REG_BASE_ADDR+0x10) + +#define FPGA_REG10_10MHZ_ENABLE 0x8000 +#define FPGA_REG10_100MHZ_ENABLE 0x4000 +#define FPGA_REG10_GIGABIT_ENABLE 0x2000 +#define FPGA_REG10_FULL_DUPLEX 0x1000 /* force Full Duplex*/ +#define FPGA_REG10_RESET_ETH 0x0800 +#define FPGA_REG10_AUTO_NEG_DIS 0x0400 +#define FPGA_REG10_INTP_ETH 0x0200 + +#define FPGA_REG10_RESET_HISR 0x0080 +#define FPGA_REG10_ENABLE_DISPLAY 0x0040 +#define FPGA_REG10_RESET_SDRAM 0x0020 +#define FPGA_REG10_OPER_BOOT 0x0010 +#define FPGA_REG10_SRAM_BOOT 0x0008 +#define FPGA_REG10_SMALL_BOOT 0x0004 +#define FPGA_REG10_FORCE_COLA 0x0002 +#define FPGA_REG10_COLA_MANUAL 0x0001 + +#define FPGA_REG10_SDRAM_ENABLE 0x0020 + +#define FPGA_REG10_ENET_ENCODE2(n) ((((unsigned long)(n))&0x0F)<<4) /*from ocotea ?*/ +#define FPGA_REG10_ENET_DECODE2(n) ((((unsigned long)(n))>>4)&0x0F) /*from ocotea ?*/ + +/*----------------------------------------------------------------------------+ +| MUX control ++----------------------------------------------------------------------------*/ +#define FPGA_REG12 (FPGA_REG_BASE_ADDR+0x12) + +#define FPGA_REG12_EBC_CTL 0x8000 +#define FPGA_REG12_UART1_CTS_RTS 0x4000 +#define FPGA_REG12_UART0_RX_ENABLE 0x2000 +#define FPGA_REG12_UART1_RX_ENABLE 0x1000 +#define FPGA_REG12_UART2_RX_ENABLE 0x0800 +#define FPGA_REG12_EBC_OUT_ENABLE 0x0400 +#define FPGA_REG12_GPIO0_OUT_ENABLE 0x0200 +#define FPGA_REG12_GPIO1_OUT_ENABLE 0x0100 +#define FPGA_REG12_GPIO_SELECT 0x0010 +#define FPGA_REG12_GPIO_CHREG 0x0008 +#define FPGA_REG12_GPIO_CLK_CHREG 0x0004 +#define FPGA_REG12_GPIO_OETRI 0x0002 +#define FPGA_REG12_EBC_ERROR 0x0001 + +/*----------------------------------------------------------------------------+ +| PCI Clock control ++----------------------------------------------------------------------------*/ +#define FPGA_REG16 (FPGA_REG_BASE_ADDR+0x16) + +#define FPGA_REG16_PCI_CLK_CTL0 0x8000 +#define FPGA_REG16_PCI_CLK_CTL1 0x4000 +#define FPGA_REG16_PCI_CLK_CTL2 0x2000 +#define FPGA_REG16_PCI_CLK_CTL3 0x1000 +#define FPGA_REG16_PCI_CLK_CTL4 0x0800 +#define FPGA_REG16_PCI_CLK_CTL5 0x0400 +#define FPGA_REG16_PCI_CLK_CTL6 0x0200 +#define FPGA_REG16_PCI_CLK_CTL7 0x0100 +#define FPGA_REG16_PCI_CLK_CTL8 0x0080 +#define FPGA_REG16_PCI_CLK_CTL9 0x0040 +#define FPGA_REG16_PCI_EXT_ARB0 0x0020 +#define FPGA_REG16_PCI_MODE_1 0x0010 +#define FPGA_REG16_PCI_TARGET_MODE 0x0008 +#define FPGA_REG16_PCI_INTP_MODE 0x0004 + +/* FB1 Divisor selection */ +#define FPGA_REG16_FB2_DIV_MASK 0x1000 +#define FPGA_REG16_FB2_DIV_LOW 0x0000 +#define FPGA_REG16_FB2_DIV_HIGH 0x1000 +/* FB2 Divisor selection */ +/* S3 switch on Board */ +#define FPGA_REG16_FB1_DIV_MASK 0x2000 +#define FPGA_REG16_FB1_DIV_LOW 0x0000 +#define FPGA_REG16_FB1_DIV_HIGH 0x2000 +/* PCI0 Clock Selection */ +/* S3 switch on Board */ +#define FPGA_REG16_PCI0_CLK_MASK 0x0c00 +#define FPGA_REG16_PCI0_CLK_33_33 0x0000 +#define FPGA_REG16_PCI0_CLK_66_66 0x0800 +#define FPGA_REG16_PCI0_CLK_100 0x0400 +#define FPGA_REG16_PCI0_CLK_133_33 0x0c00 +/* VCO Divisor selection */ +/* S3 switch on Board */ +#define FPGA_REG16_VCO_DIV_MASK 0xc000 +#define FPGA_REG16_VCO_DIV_4 0x0000 +#define FPGA_REG16_VCO_DIV_8 0x4000 +#define FPGA_REG16_VCO_DIV_6 0x8000 +#define FPGA_REG16_VCO_DIV_10 0xc000 +/* Master Clock Selection */ +/* S3, S4 switches on Board */ +#define FPGA_REG16_MASTER_CLK_MASK 0x01c0 +#define FPGA_REG16_MASTER_CLK_EXT 0x0000 +#define FPGA_REG16_MASTER_CLK_66_66 0x0040 +#define FPGA_REG16_MASTER_CLK_50 0x0080 +#define FPGA_REG16_MASTER_CLK_33_33 0x00c0 +#define FPGA_REG16_MASTER_CLK_25 0x0100 + +/*----------------------------------------------------------------------------+ +| PCI Miscellaneous ++----------------------------------------------------------------------------*/ +#define FPGA_REG18 (FPGA_REG_BASE_ADDR+0x18) + +#define FPGA_REG18_PCI_PRSNT1 0x8000 +#define FPGA_REG18_PCI_PRSNT2 0x4000 +#define FPGA_REG18_PCI_INTA 0x2000 +#define FPGA_REG18_PCI_SLOT0_INTP 0x1000 +#define FPGA_REG18_PCI_SLOT1_INTP 0x0800 +#define FPGA_REG18_PCI_SLOT2_INTP 0x0400 +#define FPGA_REG18_PCI_SLOT3_INTP 0x0200 +#define FPGA_REG18_PCI_PCI0_VC 0x0100 +#define FPGA_REG18_PCI_PCI0_VTH1 0x0080 +#define FPGA_REG18_PCI_PCI0_VTH2 0x0040 +#define FPGA_REG18_PCI_PCI0_VTH3 0x0020 + +/*----------------------------------------------------------------------------+ +| PCIe Miscellaneous ++----------------------------------------------------------------------------*/ +#define FPGA_REG1A (FPGA_REG_BASE_ADDR+0x1A) + +#define FPGA_REG1A_PE0_GLED 0x8000 +#define FPGA_REG1A_PE1_GLED 0x4000 +#define FPGA_REG1A_PE2_GLED 0x2000 +#define FPGA_REG1A_PE0_YLED 0x1000 +#define FPGA_REG1A_PE1_YLED 0x0800 +#define FPGA_REG1A_PE2_YLED 0x0400 +#define FPGA_REG1A_PE0_PWRON 0x0200 +#define FPGA_REG1A_PE1_PWRON 0x0100 +#define FPGA_REG1A_PE2_PWRON 0x0080 +#define FPGA_REG1A_PE0_REFCLK_ENABLE 0x0040 +#define FPGA_REG1A_PE1_REFCLK_ENABLE 0x0020 +#define FPGA_REG1A_PE2_REFCLK_ENABLE 0x0010 +#define FPGA_REG1A_PE_SPREAD0 0x0008 +#define FPGA_REG1A_PE_SPREAD1 0x0004 +#define FPGA_REG1A_PE_SELSOURCE_0 0x0002 +#define FPGA_REG1A_PE_SELSOURCE_1 0x0001 + +/*----------------------------------------------------------------------------+ +| PCIe Miscellaneous ++----------------------------------------------------------------------------*/ +#define FPGA_REG1C (FPGA_REG_BASE_ADDR+0x1C) + +#define FPGA_REG1C_PE0_ROOTPOINT 0x8000 +#define FPGA_REG1C_PE1_ENDPOINT 0x4000 +#define FPGA_REG1C_PE2_ENDPOINT 0x2000 +#define FPGA_REG1C_PE0_PRSNT 0x1000 +#define FPGA_REG1C_PE1_PRSNT 0x0800 +#define FPGA_REG1C_PE2_PRSNT 0x0400 +#define FPGA_REG1C_PE0_WAKE 0x0080 +#define FPGA_REG1C_PE1_WAKE 0x0040 +#define FPGA_REG1C_PE2_WAKE 0x0020 +#define FPGA_REG1C_PE0_PERST 0x0010 +#define FPGA_REG1C_PE1_PERST 0x0080 +#define FPGA_REG1C_PE2_PERST 0x0040 + +/*----------------------------------------------------------------------------+ +| Defines ++----------------------------------------------------------------------------*/ +#define PERIOD_133_33MHZ 7500 /* 7,5ns */ +#define PERIOD_100_00MHZ 10000 /* 10ns */ +#define PERIOD_83_33MHZ 12000 /* 12ns */ +#define PERIOD_75_00MHZ 13333 /* 13,333ns */ +#define PERIOD_66_66MHZ 15000 /* 15ns */ +#define PERIOD_50_00MHZ 20000 /* 20ns */ +#define PERIOD_33_33MHZ 30000 /* 30ns */ +#define PERIOD_25_00MHZ 40000 /* 40ns */ + +/*---------------------------------------------------------------------------*/ + +#endif /* __CONFIG_H */ diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h new file mode 100644 index 00000000000..c6aa8ece5b0 --- /dev/null +++ b/include/configs/zylonite.h @@ -0,0 +1,228 @@ +/* + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * Configuation settings for the Zylonite board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_CPU_MONAHANS 1 /* Intel Monahan CPU */ +#define CONFIG_ZYLONITE 1 /* Zylonite board */ + +/* #define CONFIG_LCD 1 */ +#ifdef CONFIG_LCD +#define CONFIG_SHARP_LM8V31 +#endif +/* #define CONFIG_MMC 1 */ +#define BOARD_LATE_INIT 1 + +#undef CONFIG_SKIP_RELOCATE_UBOOT +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +#undef TURN_ON_ETHERNET +#ifdef TURN_ON_ETHERNET +# define CONFIG_DRIVER_SMC91111 1 +# define CONFIG_SMC91111_BASE 0x14000300 +# define CONFIG_SMC91111_EXT_PHY +# define CONFIG_SMC_USE_32_BIT +# undef CONFIG_SMC_USE_IOFUNCS /* just for use with the kernel */ +#endif + +/* + * select serial console configuration + */ +#define CONFIG_FFUART 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#ifdef TURN_ON_ETHERNET +# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) +#else +# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_ENV \ + | CFG_CMD_NAND) \ + & ~(CFG_CMD_NET \ + | CFG_CMD_FLASH \ + | CFG_CMD_IMLS)) +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY -1 +#define CONFIG_ETHADDR 08:00:3e:26:0a:5b +#define CONFIG_NETMASK 255.255.0.0 +#define CONFIG_IPADDR 192.168.0.21 +#define CONFIG_SERVERIP 192.168.0.250 +#define CONFIG_BOOTCOMMAND "bootm 80000" +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200" +#define CONFIG_CMDLINE_TAG +#define CONFIG_TIMESTAMP + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_HUSH_PARSER 1 +#define CFG_PROMPT_HUSH_PS2 "> " + +#define CFG_LONGHELP /* undef to save memory */ +#ifdef CFG_HUSH_PARSER +#define CFG_PROMPT "$ " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#endif +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_DEVICE_NULLDEV 1 + +#define CFG_MEMTEST_START 0x9c000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x9c400000 /* 4 ... 8 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR (CFG_DRAM_BASE + 0x8000) /* default load address */ + +#define CFG_HZ 3250000 /* incrementer freq: 3.25 MHz */ + +/* Monahans Core Frequency */ +#define CFG_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */ +#define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* #define CFG_MMC_BASE 0xF0000000 */ + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ +#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ +#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ + +#define CFG_DRAM_BASE 0x80000000 /* at CS0 */ +#define CFG_DRAM_SIZE 0x04000000 /* 64 MB Ram */ + +#undef CFG_SKIP_DRAM_SCRUB + + +/* + * NAND Flash + */ +/* Use the new NAND code. (BOARDLIBS = drivers/nand/libnand.a required) */ +#define CONFIG_NEW_NAND_CODE +#define CFG_NAND0_BASE 0x0 +#undef CFG_NAND1_BASE + +#define CFG_NAND_BASE_LIST { CFG_NAND0_BASE } +#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ + +/* nand timeout values */ +#define CFG_NAND_PROG_ERASE_TO 3000 +#define CFG_NAND_OTHER_TO 100 +#define CFG_NAND_SENDCMD_RETRY 3 +#undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ + +/* NAND Timing Parameters (in ns) */ +#define NAND_TIMING_tCH 10 +#define NAND_TIMING_tCS 0 +#define NAND_TIMING_tWH 20 +#define NAND_TIMING_tWP 40 + +#define NAND_TIMING_tRH 20 +#define NAND_TIMING_tRP 40 + +#define NAND_TIMING_tR 11123 +#define NAND_TIMING_tWHR 100 +#define NAND_TIMING_tAR 10 + +/* NAND debugging */ +#define CFG_DFC_DEBUG1 /* usefull */ +#undef CFG_DFC_DEBUG2 /* noisy */ +#undef CFG_DFC_DEBUG3 /* extremly noisy */ + +#define CONFIG_MTD_DEBUG +#define CONFIG_MTD_DEBUG_VERBOSE 1 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 + +#define CFG_NO_FLASH 1 + +#define CFG_ENV_IS_IN_NAND 1 +#define CFG_ENV_OFFSET 0x40000 +#define CFG_ENV_OFFSET_REDUND 0x44000 +#define CFG_ENV_SIZE 0x4000 + + +#endif /* __CONFIG_H */ diff --git a/include/crc.h b/include/crc.h new file mode 100644 index 00000000000..10560c9fa93 --- /dev/null +++ b/include/crc.h @@ -0,0 +1,100 @@ +/* + *========================================================================== + * + * crc.h + * + * Interface for the CRC algorithms. + * + *========================================================================== + *####ECOSGPLCOPYRIGHTBEGIN#### + * ------------------------------------------- + * This file is part of eCos, the Embedded Configurable Operating System. + * Copyright (C) 2002 Andrew Lunn + * + * eCos is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 or (at your option) any later version. + * + * eCos is distributed in the hope that it will be useful, but WITHOUT ANY + * WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with eCos; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * As a special exception, if other files instantiate templates or use macros + * or inline functions from this file, or you compile this file and link it + * with other works to produce a work based on this file, this file does not + * by itself cause the resulting work to be covered by the GNU General Public + * License. However the source code for this file must still be made available + * in accordance with section (3) of the GNU General Public License. + * + * This exception does not invalidate any other reasons why a work based on + * this file might be covered by the GNU General Public License. + * + * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. + * at http: *sources.redhat.com/ecos/ecos-license/ + * ------------------------------------------- + *####ECOSGPLCOPYRIGHTEND#### + *========================================================================== + *#####DESCRIPTIONBEGIN#### + * + * Author(s): Andrew Lunn + * Contributors: Andrew Lunn + * Date: 2002-08-06 + * Purpose: + * Description: + * + * This code is part of eCos (tm). + * + *####DESCRIPTIONEND#### + * + *========================================================================== + */ + +#ifndef _SERVICES_CRC_CRC_H_ +#define _SERVICES_CRC_CRC_H_ + +#include <linux/types.h> + +#ifndef __externC +# ifdef __cplusplus +# define __externC extern "C" +# else +# define __externC extern +# endif +#endif + +/* Compute a CRC, using the POSIX 1003 definition */ +extern uint32_t +cyg_posix_crc32(unsigned char *s, int len); + +/* Gary S. Brown's 32 bit CRC */ + +extern uint32_t +cyg_crc32(unsigned char *s, int len); + +/* Gary S. Brown's 32 bit CRC, but accumulate the result from a */ +/* previous CRC calculation */ + +extern uint32_t +cyg_crc32_accumulate(uint32_t crc, unsigned char *s, int len); + +/* Ethernet FCS Algorithm */ + +extern uint32_t +cyg_ether_crc32(unsigned char *s, int len); + +/* Ethernet FCS algorithm, but accumulate the result from a previous */ +/* CRC calculation. */ + +extern uint32_t +cyg_ether_crc32_accumulate(uint32_t crc, unsigned char *s, int len); + +/* 16 bit CRC with polynomial x^16+x^12+x^5+1 */ + +extern uint16_t cyg_crc16(unsigned char *s, int len); + +#endif /* _SERVICES_CRC_CRC_H_ */ diff --git a/include/da9030.h b/include/da9030.h new file mode 100644 index 00000000000..41108b9b36f --- /dev/null +++ b/include/da9030.h @@ -0,0 +1,106 @@ +/* + * (C) Copyright 2006 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* DA9030 register definitions */ +#define CID 0x00 +#define EVENT_A 0x01 +#define EVENT_B 0x02 +#define EVENT_C 0x03 +#define STATUS 0x04 +#define IRQ_MASK_A 0x05 +#define IRQ_MASK_B 0x06 +#define IRQ_MASK_C 0x07 +#define SYS_CONTROL_A 0x08 +#define SYS_CONTROL_B 0x09 +#define FAULT_LOG 0x0A +#define LDO_10_11 0x10 +#define LDO_15 0x11 +#define LDO_14_16 0x12 +#define LDO_18_19 0x13 +#define LDO_17_SIMCP0 0x14 +#define BUCK2_DVC1 0x15 +#define BUCK2_DVC2 0x16 +#define REG_CONTROL_1_17 0x17 +#define REG_CONTROL_2_18 0x18 +#define USBPUMP 0x19 +#define SLEEP_CONTROL 0x1A +#define STARTUP_CONTROL 0x1B +#define LED1_CONTROL 0x20 +#define LED2_CONTROL 0x21 +#define LED3_CONTROL 0x22 +#define LED4_CONTROL 0x23 +#define LEDPC_CONTROL 0x24 +#define WLED_CONTROL 0x25 +#define MISC_CONTROLA 0x26 +#define MISC_CONTROLB 0x27 +#define CHARGE_CONTROL 0x28 +#define CCTR_CONTROL 0x29 +#define TCTR_CONTROL 0x2A +#define CHARGE_PULSE 0x2B + +/* ... some missing ...*/ + +#define LDO1 0x90 +#define LDO2_3 0x91 +#define LDO4_5 0x92 +#define LDO6_SIMCP 0x93 +#define LDO7_8 0x94 +#define LDO9_12 0x95 +#define BUCK 0x96 +#define REG_CONTROL_1_97 0x97 +#define REG_CONTROL_2_98 0x98 +#define REG_SLEEP_CONTROL1 0x99 +#define REG_SLEEP_CONTROL2 0x9A +#define REG_SLEEP_CONTROL3 0x9B +#define ADC_MAN_CONTROL 0xA0 +#define ADC_AUTO_CONTROL 0xA1 +#define VBATMON 0xA2 +#define VBATMONTXMON 0xA3 +#define TBATHIGHP 0xA4 +#define TBATHIGHN 0xA5 +#define TBATLOW 0xA6 +#define MAN_RES 0xB0 +#define VBAT_RES 0xB1 +#define VBATMIN_RES 0xB2 +#define VBATMINTXON_RES 0xB3 +#define ICHMAX_RES 0xB4 +#define ICHMIN_RES 0xB5 +#define ICHAVERAGE_RES 0xB6 +#define VCHMAX_RES 0xB7 +#define VCHMIN_RES 0xB8 +#define TBAT_RES 0xB9 +#define ADC_IN4_RES 0xBA + +#define STATUS_ONKEY_N 0x1 /* current ONKEY_N value */ +#define STATUS_PWREN1 (1<<1) /* PWREN1 value */ +#define STATUS_EXTON (1<<2) /* EXTON value */ +#define STATUS_CHDET (1<<3) /* Charger detection status */ +#define STATUS_TBAT (1<<4) /* Battery over/under temperature status */ +#define STATUS_VBATMON (1<<5) /* VBATMON comparison status */ +#define STATUS_VBATMONTXON (1<<6) /* VBATMONTXON comparison status */ +#define STATUS_CHIOVER (1<<7) /* Charge overcurrent */ + +#define SYS_CONTROL_A_SLEEP_N_PIN_ENABLE 0x1 +#define SYS_CONTROL_A_SHUT_DOWN (1<<1) +#define SYS_CONTROL_A_HWRES_ENABLE (1<<2) +#define SYS_CONTROL_A_WDOG_ACTION (1<<3) +#define SYS_CONTROL_A_WATCHDOG (1<<7) diff --git a/include/environment.h b/include/environment.h index bb109649f6b..6e34e370219 100644 --- a/include/environment.h +++ b/include/environment.h @@ -60,7 +60,7 @@ # if defined(CFG_ENV_ADDR_REDUND) && !defined(CFG_ENV_SIZE_REDUND) # define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE # endif -# if (CFG_ENV_ADDR >= CFG_MONITOR_BASE) && \ +# if ((!defined (ENV_IS_VARIABLE)) || !ENV_IS_VARIABLE) && (CFG_ENV_ADDR >= CFG_MONITOR_BASE) && \ (CFG_ENV_ADDR+CFG_ENV_SIZE) <= (CFG_MONITOR_BASE + CFG_MONITOR_LEN) # define ENV_IS_EMBEDDED 1 # endif @@ -69,6 +69,18 @@ # endif #endif /* CFG_ENV_IS_IN_FLASH */ +#if defined(CFG_ENV_IS_IN_NAND) +# ifndef CFG_ENV_OFFSET +# error "Need to define CFG_ENV_OFFSET when using CFG_ENV_IS_IN_NAND" +# endif +# ifndef CFG_ENV_SIZE +# error "Need to define CFG_ENV_SIZE when using CFG_ENV_IS_IN_NAND" +# endif +# ifdef CFG_ENV_OFFSET_REDUND +# define CFG_REDUNDAND_ENVIRONMENT +# endif +#endif /* CFG_ENV_IS_IN_NAND */ + #ifdef CFG_REDUNDAND_ENVIRONMENT # define ENV_HEADER_SIZE (sizeof(unsigned long) + 1) diff --git a/include/flash.h b/include/flash.h index decb046c53c..84b48a9f2e7 100644 --- a/include/flash.h +++ b/include/flash.h @@ -45,6 +45,7 @@ typedef struct { ushort vendor; /* the primary vendor id */ ushort cmd_reset; /* Vendor specific reset command */ ushort interface; /* used for x8/x16 adjustments */ + ushort legacy_unlock; /* support Intel legacy (un)locking */ #endif } flash_info_t; @@ -233,6 +234,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define SST_ID_xF3202 0x235A235A /* 39xF3202 ID (32M = 2M x 16 ) */ #define SST_ID_xF6401 0x236B236B /* 39xF6401 ID (64M = 4M x 16 ) */ #define SST_ID_xF6402 0x236A236A /* 39xF6402 ID (64M = 4M x 16 ) */ +#define SST_ID_xF020 0xBFD6BFD6 /* 39xF020 ID (256KB = 2Mbit x 8) */ #define SST_ID_xF040 0xBFD7BFD7 /* 39xF040 ID (512KB = 4Mbit x 8) */ #define STM_ID_F040B 0xE2 /* M29F040B ID ( 4M = 512K x 8 ) */ @@ -242,6 +244,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define STM_ID_29W320DT 0x22CA22CA /* M29W320DT ID (32 M, top boot sector) */ #define STM_ID_29W320DB 0x22CB22CB /* M29W320DB ID (32 M, bottom boot sect) */ #define STM_ID_29W040B 0x00E300E3 /* M29W040B ID (4M = 512K x 8) */ +#define FLASH_PSD4256GV 0x00E9 /* PSD4256 Flash and CPLD combination */ #define INTEL_ID_28F016S 0x66a066a0 /* 28F016S[VS] ID (16M = 512k x 16) */ #define INTEL_ID_28F800B3T 0x88928892 /* 8M = 512K x 16 top boot sector */ @@ -269,10 +272,17 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define INTEL_ID_28F320J3A 0x00160016 /* 32M = 128K x 32 */ #define INTEL_ID_28F640J3A 0x00170017 /* 64M = 128K x 64 */ #define INTEL_ID_28F128J3A 0x00180018 /* 128M = 128K x 128 */ +#define INTEL_ID_28F256J3A 0x001D001D /* 256M = 128K x 256 */ #define INTEL_ID_28F256L18T 0x880D880D /* 256M = 128K x 255 + 32k x 4 */ #define INTEL_ID_28F64K3 0x88018801 /* 64M = 32K x 255 + 32k x 4 */ #define INTEL_ID_28F128K3 0x88028802 /* 128M = 64K x 255 + 32k x 4 */ #define INTEL_ID_28F256K3 0x88038803 /* 256M = 128K x 255 + 32k x 4 */ +#define INTEL_ID_28F64P30T 0x88178817 /* 64M = 32K x 255 + 32k x 4 */ +#define INTEL_ID_28F64P30B 0x881A881A /* 64M = 32K x 255 + 32k x 4 */ +#define INTEL_ID_28F128P30T 0x88188818 /* 128M = 64K x 255 + 32k x 4 */ +#define INTEL_ID_28F128P30B 0x881B881B /* 128M = 64K x 255 + 32k x 4 */ +#define INTEL_ID_28F256P30T 0x88198819 /* 256M = 128K x 255 + 32k x 4 */ +#define INTEL_ID_28F256P30B 0x881C881C /* 256M = 128K x 255 + 32k x 4 */ #define INTEL_ID_28F160S3 0x00D000D0 /* 16M = 512K x 32 (64kB x 32) */ #define INTEL_ID_28F320S3 0x00D400D4 /* 32M = 512K x 64 (64kB x 64) */ @@ -334,6 +344,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define FLASH_SST160A 0x0046 /* SST 39xF160A ID ( 16M = 1M x 16 ) */ #define FLASH_SST320 0x0048 /* SST 39xF160A ID ( 16M = 1M x 16 ) */ #define FLASH_SST640 0x004A /* SST 39xF160A ID ( 16M = 1M x 16 ) */ +#define FLASH_SST020 0x0024 /* SST 39xF020 ID (256KB = 2Mbit x 8 ) */ #define FLASH_SST040 0x000E /* SST 39xF040 ID (512KB = 4Mbit x 8 ) */ #define FLASH_STM800AB 0x0051 /* STM M29WF800AB ( 8M = 512K x 16 ) */ @@ -401,6 +412,7 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define FLASH_28F320J3A 0x00C0 /* INTEL 28F320J3A ( 32M = 128K x 32) */ #define FLASH_28F640J3A 0x00C2 /* INTEL 28F640J3A ( 64M = 128K x 64) */ #define FLASH_28F128J3A 0x00C4 /* INTEL 28F128J3A (128M = 128K x 128) */ +#define FLASH_28F256J3A 0x00C6 /* INTEL 28F256J3A (256M = 128K x 256) */ #define FLASH_FUJLV650 0x00D0 /* Fujitsu MBM 29LV650UE/651UE */ #define FLASH_MT28S4M16LC 0x00E1 /* Micron MT28S4M16LC */ diff --git a/include/ft_build.h b/include/ft_build.h index 9104b1a5550..47ca575d9fe 100644 --- a/include/ft_build.h +++ b/include/ft_build.h @@ -57,10 +57,12 @@ void ft_prop_int(struct ft_cxt *cxt, const char *name, int val); void ft_begin(struct ft_cxt *cxt, void *blob, int max_size); void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size); -void ft_setup(void *blob, int size, bd_t * bd); +void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end); void ft_dump_blob(const void *bphp); void ft_merge_blob(struct ft_cxt *cxt, void *blob); void *ft_get_prop(void *bphp, const char *propname, int *szp); +void ft_board_setup(void *blob, bd_t *bd); + #endif diff --git a/include/galileo/core.h b/include/galileo/core.h index 0735d075b3c..49f4dd2d210 100644 --- a/include/galileo/core.h +++ b/include/galileo/core.h @@ -110,7 +110,10 @@ extern unsigned int INTERNAL_REG_BASE_ADDR; #define _1G 0x40000000 #define _2G 0x80000000 +#ifndef BOOL_WAS_DEFINED +#define BOOL_WAS_DEFINED typedef enum _bool{false,true} bool; +#endif /* Little to Big endian conversion macros */ diff --git a/include/image.h b/include/image.h index af37bcad5aa..139df0b2d1e 100644 --- a/include/image.h +++ b/include/image.h @@ -75,6 +75,7 @@ #define IH_CPU_NIOS 13 /* Nios-32 */ #define IH_CPU_MICROBLAZE 14 /* MicroBlaze */ #define IH_CPU_NIOS2 15 /* Nios-II */ +#define IH_CPU_BLACKFIN 16 /* Blackfin */ /* * Image Types diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h new file mode 100644 index 00000000000..71a20ae2b02 --- /dev/null +++ b/include/linux/mtd/bbm.h @@ -0,0 +1,124 @@ +/* + * linux/include/linux/mtd/bbm.h + * + * NAND family Bad Block Management (BBM) header file + * - Bad Block Table (BBT) implementation + * + * Copyright (c) 2005 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * Copyright (c) 2000-2005 + * Thomas Gleixner <tglx@linuxtronix.de> + * + */ +#ifndef __LINUX_MTD_BBM_H +#define __LINUX_MTD_BBM_H + +/* The maximum number of NAND chips in an array */ +#ifndef NAND_MAX_CHIPS +#define NAND_MAX_CHIPS 8 +#endif + +/** + * struct nand_bbt_descr - bad block table descriptor + * @param options options for this descriptor + * @param pages the page(s) where we find the bbt, used with + * option BBT_ABSPAGE when bbt is searched, + * then we store the found bbts pages here. + * Its an array and supports up to 8 chips now + * @param offs offset of the pattern in the oob area of the page + * @param veroffs offset of the bbt version counter in the oob are of the page + * @param version version read from the bbt page during scan + * @param len length of the pattern, if 0 no pattern check is performed + * @param maxblocks maximum number of blocks to search for a bbt. This number of + * blocks is reserved at the end of the device + * where the tables are written. + * @param reserved_block_code if non-0, this pattern denotes a reserved + * (rather than bad) block in the stored bbt + * @param pattern pattern to identify bad block table or factory marked + * good / bad blocks, can be NULL, if len = 0 + * + * Descriptor for the bad block table marker and the descriptor for the + * pattern which identifies good and bad blocks. The assumption is made + * that the pattern and the version count are always located in the oob area + * of the first block. + */ +struct nand_bbt_descr { + int options; + int pages[NAND_MAX_CHIPS]; + int offs; + int veroffs; + uint8_t version[NAND_MAX_CHIPS]; + int len; + int maxblocks; + int reserved_block_code; + uint8_t *pattern; +}; + +/* Options for the bad block table descriptors */ + +/* The number of bits used per block in the bbt on the device */ +#define NAND_BBT_NRBITS_MSK 0x0000000F +#define NAND_BBT_1BIT 0x00000001 +#define NAND_BBT_2BIT 0x00000002 +#define NAND_BBT_4BIT 0x00000004 +#define NAND_BBT_8BIT 0x00000008 +/* The bad block table is in the last good block of the device */ +#define NAND_BBT_LASTBLOCK 0x00000010 +/* The bbt is at the given page, else we must scan for the bbt */ +#define NAND_BBT_ABSPAGE 0x00000020 +/* The bbt is at the given page, else we must scan for the bbt */ +#define NAND_BBT_SEARCH 0x00000040 +/* bbt is stored per chip on multichip devices */ +#define NAND_BBT_PERCHIP 0x00000080 +/* bbt has a version counter at offset veroffs */ +#define NAND_BBT_VERSION 0x00000100 +/* Create a bbt if none axists */ +#define NAND_BBT_CREATE 0x00000200 +/* Search good / bad pattern through all pages of a block */ +#define NAND_BBT_SCANALLPAGES 0x00000400 +/* Scan block empty during good / bad block scan */ +#define NAND_BBT_SCANEMPTY 0x00000800 +/* Write bbt if neccecary */ +#define NAND_BBT_WRITE 0x00001000 +/* Read and write back block contents when writing bbt */ +#define NAND_BBT_SAVECONTENT 0x00002000 +/* Search good / bad pattern on the first and the second page */ +#define NAND_BBT_SCAN2NDPAGE 0x00004000 + +/* The maximum number of blocks to scan for a bbt */ +#define NAND_BBT_SCAN_MAXBLOCKS 4 + +/* + * Constants for oob configuration + */ +#define ONENAND_BADBLOCK_POS 0 + +/** + * struct bbt_info - [GENERIC] Bad Block Table data structure + * @param bbt_erase_shift [INTERN] number of address bits in a bbt entry + * @param badblockpos [INTERN] position of the bad block marker in the oob area + * @param bbt [INTERN] bad block table pointer + * @param badblock_pattern [REPLACEABLE] bad block scan pattern used for initial bad block scan + * @param priv [OPTIONAL] pointer to private bbm date + */ +struct bbm_info { + int bbt_erase_shift; + int badblockpos; + int options; + + uint8_t *bbt; + + int (*isbad_bbt)(struct mtd_info *mtd, loff_t ofs, int allowbbt); + + /* TODO Add more NAND specific fileds */ + struct nand_bbt_descr *badblock_pattern; + + void *priv; +}; + +/* OneNAND BBT interface */ +extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd); +extern int onenand_default_bbt(struct mtd_info *mtd); + +#endif /* __LINUX_MTD_BBM_H */ diff --git a/include/linux/mtd/compat.h b/include/linux/mtd/compat.h new file mode 100644 index 00000000000..460cd45c808 --- /dev/null +++ b/include/linux/mtd/compat.h @@ -0,0 +1,44 @@ +#ifndef _LINUX_COMPAT_H_ +#define _LINUX_COMPAT_H_ + +#define __user +#define __iomem + +#define ndelay(x) udelay(1) + +#define printk printf + +#define KERN_EMERG +#define KERN_ALERT +#define KERN_CRIT +#define KERN_ERR +#define KERN_WARNING +#define KERN_NOTICE +#define KERN_INFO +#define KERN_DEBUG + +#define kmalloc(size, flags) malloc(size) +#define kfree(ptr) free(ptr) + +/* + * ..and if you can't take the strict + * types, you can specify one yourself. + * + * Or not use min/max at all, of course. + */ +#define min_t(type,x,y) \ + ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; }) +#define max_t(type,x,y) \ + ({ type __x = (x); type __y = (y); __x > __y ? __x: __y; }) + +#define BUG() do { \ + printf("U-Boot BUG at %s:%d!\n", __FILE__, __LINE__); \ +} while (0) + +#define BUG_ON(condition) do { if (condition) BUG(); } while(0) + +#define likely(x) __builtin_expect(!!(x), 1) +#define unlikely(x) __builtin_expect(!!(x), 0) + +#define PAGE_SIZE 4096 +#endif diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h index ebf9a769241..eeb1d7e98e6 100644 --- a/include/linux/mtd/doc2000.h +++ b/include/linux/mtd/doc2000.h @@ -91,6 +91,13 @@ struct DiskOnChip; #define ADDR_PAGE 2 #define ADDR_COLUMN_PAGE 3 +struct Nand { + char floor, chip; + unsigned long curadr; + unsigned char curmode; + /* Also some erase/write/pipeline info when we get that far */ +}; + struct DiskOnChip { unsigned long physadr; unsigned long virtadr; @@ -148,4 +155,62 @@ void doc_probe(unsigned long physadr); void doc_print(struct DiskOnChip*); +/* + * Standard NAND flash commands + */ +#define NAND_CMD_READ0 0 +#define NAND_CMD_READ1 1 +#define NAND_CMD_PAGEPROG 0x10 +#define NAND_CMD_READOOB 0x50 +#define NAND_CMD_ERASE1 0x60 +#define NAND_CMD_STATUS 0x70 +#define NAND_CMD_SEQIN 0x80 +#define NAND_CMD_READID 0x90 +#define NAND_CMD_ERASE2 0xd0 +#define NAND_CMD_RESET 0xff + +/* + * NAND Flash Manufacturer ID Codes + */ +#define NAND_MFR_TOSHIBA 0x98 +#define NAND_MFR_SAMSUNG 0xec + +/* + * NAND Flash Device ID Structure + * + * Structure overview: + * + * name - Complete name of device + * + * manufacture_id - manufacturer ID code of device. + * + * model_id - model ID code of device. + * + * chipshift - total number of address bits for the device which + * is used to calculate address offsets and the total + * number of bytes the device is capable of. + * + * page256 - denotes if flash device has 256 byte pages or not. + * + * pageadrlen - number of bytes minus one needed to hold the + * complete address into the flash array. Keep in + * mind that when a read or write is done to a + * specific address, the address is input serially + * 8 bits at a time. This structure member is used + * by the read/write routines as a loop index for + * shifting the address out 8 bits at a time. + * + * erasesize - size of an erase block in the flash device. + */ +struct nand_flash_dev { + char * name; + int manufacture_id; + int model_id; + int chipshift; + char page256; + char pageadrlen; + unsigned long erasesize; + int bus16; +}; + #endif /* __MTD_DOC2000_H__ */ diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h new file mode 100644 index 00000000000..3d1d4168107 --- /dev/null +++ b/include/linux/mtd/mtd-abi.h @@ -0,0 +1,99 @@ +/* + * $Id: mtd-abi.h,v 1.7 2004/11/23 15:37:32 gleixner Exp $ + * + * Portions of MTD ABI definition which are shared by kernel and user space + */ + +#ifndef __MTD_ABI_H__ +#define __MTD_ABI_H__ + +struct erase_info_user { + uint32_t start; + uint32_t length; +}; + +struct mtd_oob_buf { + uint32_t start; + uint32_t length; + unsigned char *ptr; +}; + +#define MTD_ABSENT 0 +#define MTD_RAM 1 +#define MTD_ROM 2 +#define MTD_NORFLASH 3 +#define MTD_NANDFLASH 4 +#define MTD_PEROM 5 +#define MTD_OTHER 14 +#define MTD_UNKNOWN 15 + +#define MTD_CLEAR_BITS 1 /* Bits can be cleared (flash) */ +#define MTD_SET_BITS 2 /* Bits can be set */ +#define MTD_ERASEABLE 4 /* Has an erase function */ +#define MTD_WRITEB_WRITEABLE 8 /* Direct IO is possible */ +#define MTD_VOLATILE 16 /* Set for RAMs */ +#define MTD_XIP 32 /* eXecute-In-Place possible */ +#define MTD_OOB 64 /* Out-of-band data (NAND flash) */ +#define MTD_ECC 128 /* Device capable of automatic ECC */ +#define MTD_NO_VIRTBLOCKS 256 /* Virtual blocks not allowed */ + +/* Some common devices / combinations of capabilities */ +#define MTD_CAP_ROM 0 +#define MTD_CAP_RAM (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE) +#define MTD_CAP_NORFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE) +#define MTD_CAP_NANDFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE|MTD_OOB) +#define MTD_WRITEABLE (MTD_CLEAR_BITS|MTD_SET_BITS) + + +/* Types of automatic ECC/Checksum available */ +#define MTD_ECC_NONE 0 /* No automatic ECC available */ +#define MTD_ECC_RS_DiskOnChip 1 /* Automatic ECC on DiskOnChip */ +#define MTD_ECC_SW 2 /* SW ECC for Toshiba & Samsung devices */ + +/* ECC byte placement */ +#define MTD_NANDECC_OFF 0 /* Switch off ECC (Not recommended) */ +#define MTD_NANDECC_PLACE 1 /* Use the given placement in the structure (YAFFS1 legacy mode) */ +#define MTD_NANDECC_AUTOPLACE 2 /* Use the default placement scheme */ +#define MTD_NANDECC_PLACEONLY 3 /* Use the given placement in the structure (Do not store ecc result on read) */ +#define MTD_NANDECC_AUTOPL_USR 4 /* Use the given autoplacement scheme rather than using the default */ + +struct mtd_info_user { + uint8_t type; + uint32_t flags; + uint32_t size; /* Total size of the MTD */ + uint32_t erasesize; + uint32_t oobblock; /* Size of OOB blocks (e.g. 512) */ + uint32_t oobsize; /* Amount of OOB data per block (e.g. 16) */ + uint32_t ecctype; + uint32_t eccsize; +}; + +struct region_info_user { + uint32_t offset; /* At which this region starts, + * from the beginning of the MTD */ + uint32_t erasesize; /* For this region */ + uint32_t numblocks; /* Number of blocks in this region */ + uint32_t regionindex; +}; + +#define MEMGETINFO _IOR('M', 1, struct mtd_info_user) +#define MEMERASE _IOW('M', 2, struct erase_info_user) +#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) +#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) +#define MEMLOCK _IOW('M', 5, struct erase_info_user) +#define MEMUNLOCK _IOW('M', 6, struct erase_info_user) +#define MEMGETREGIONCOUNT _IOR('M', 7, int) +#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) +#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) +#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo) +#define MEMGETBADBLOCK _IOW('M', 11, loff_t) +#define MEMSETBADBLOCK _IOW('M', 12, loff_t) + +struct nand_oobinfo { + uint32_t useecc; + uint32_t eccbytes; + uint32_t oobfree[8][2]; + uint32_t eccpos[32]; +}; + +#endif /* __MTD_ABI_H__ */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h new file mode 100644 index 00000000000..13e90803a11 --- /dev/null +++ b/include/linux/mtd/mtd.h @@ -0,0 +1,214 @@ +/* + * $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $ + * + * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al. + * + * Released under GPL + */ + +#ifndef __MTD_MTD_H__ +#define __MTD_MTD_H__ +#include <linux/types.h> +#include <linux/mtd/mtd-abi.h> + +#define MAX_MTD_DEVICES 16 + +#define MTD_ERASE_PENDING 0x01 +#define MTD_ERASING 0x02 +#define MTD_ERASE_SUSPEND 0x04 +#define MTD_ERASE_DONE 0x08 +#define MTD_ERASE_FAILED 0x10 + +/* If the erase fails, fail_addr might indicate exactly which block failed. If + fail_addr = 0xffffffff, the failure was not at the device level or was not + specific to any particular block. */ +struct erase_info { + struct mtd_info *mtd; + u_int32_t addr; + u_int32_t len; + u_int32_t fail_addr; + u_long time; + u_long retries; + u_int dev; + u_int cell; + void (*callback) (struct erase_info *self); + u_long priv; + u_char state; + struct erase_info *next; +}; + +struct mtd_erase_region_info { + u_int32_t offset; /* At which this region starts, from the beginning of the MTD */ + u_int32_t erasesize; /* For this region */ + u_int32_t numblocks; /* Number of blocks of erasesize in this region */ +}; + +struct mtd_info { + u_char type; + u_int32_t flags; + u_int32_t size; /* Total size of the MTD */ + + /* "Major" erase size for the device. Naïve users may take this + * to be the only erase size available, or may use the more detailed + * information below if they desire + */ + u_int32_t erasesize; + + u_int32_t oobblock; /* Size of OOB blocks (e.g. 512) */ + u_int32_t oobsize; /* Amount of OOB data per block (e.g. 16) */ + u_int32_t oobavail; /* Number of bytes in OOB area available for fs */ + u_int32_t ecctype; + u_int32_t eccsize; + + + /* Kernel-only stuff starts here. */ + char *name; + int index; + + /* oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO) */ + struct nand_oobinfo oobinfo; + + /* Data for variable erase regions. If numeraseregions is zero, + * it means that the whole device has erasesize as given above. + */ + int numeraseregions; + struct mtd_erase_region_info *eraseregions; + + /* This really shouldn't be here. It can go away in 2.5 */ + u_int32_t bank_size; + + int (*erase) (struct mtd_info *mtd, struct erase_info *instr); + + /* This stuff for eXecute-In-Place */ + int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf); + + /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ + void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len); + + + int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); + int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + + int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); + int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); + + int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); + int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + + /* + * Methods to access the protection register area, present in some + * flash devices. The user data is one time programmable but the + * factory data is read only. + */ + int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); + + int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); + + /* This function is not yet implemented */ + int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); +#if 0 + /* kvec-based read/write methods. We need these especially for NAND flash, + with its limited number of write cycles per erase. + NB: The 'count' parameter is the number of _vectors_, each of + which contains an (ofs, len) tuple. + */ + int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen); + int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, + size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); + int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); + int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, + size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); +#endif + /* Sync */ + void (*sync) (struct mtd_info *mtd); +#if 0 + /* Chip-supported device locking */ + int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len); + int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len); + + /* Power Management functions */ + int (*suspend) (struct mtd_info *mtd); + void (*resume) (struct mtd_info *mtd); +#endif + /* Bad block management functions */ + int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); + int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); + + void *priv; + + struct module *owner; + int usecount; +}; + + + /* Kernel-side ioctl definitions */ + +extern int add_mtd_device(struct mtd_info *mtd); +extern int del_mtd_device (struct mtd_info *mtd); + +extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); + +extern void put_mtd_device(struct mtd_info *mtd); + +#if 0 +struct mtd_notifier { + void (*add)(struct mtd_info *mtd); + void (*remove)(struct mtd_info *mtd); + struct list_head list; +}; + + +extern void register_mtd_user (struct mtd_notifier *new); +extern int unregister_mtd_user (struct mtd_notifier *old); + +int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen); + +int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, + unsigned long count, loff_t from, size_t *retlen); +#endif + +#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args) +#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d)) +#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg) +#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args) +#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args) +#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args) +#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args) +#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args) +#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args) +#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args) +#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args) +#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0) + + +#ifdef CONFIG_MTD_PARTITIONS +void mtd_erase_callback(struct erase_info *instr); +#else +static inline void mtd_erase_callback(struct erase_info *instr) +{ + if (instr->callback) + instr->callback(instr); +} +#endif + +/* + * Debugging macro and defines + */ +#define MTD_DEBUG_LEVEL0 (0) /* Quiet */ +#define MTD_DEBUG_LEVEL1 (1) /* Audible */ +#define MTD_DEBUG_LEVEL2 (2) /* Loud */ +#define MTD_DEBUG_LEVEL3 (3) /* Noisy */ + +#ifdef CONFIG_MTD_DEBUG +#define DEBUG(n, args...) \ + do { \ + if (n <= CONFIG_MTD_DEBUG_VERBOSE) \ + printk(KERN_INFO args); \ + } while(0) +#else /* CONFIG_MTD_DEBUG */ +#define DEBUG(n, args...) do { } while(0) + +#endif /* CONFIG_MTD_DEBUG */ + +#endif /* __MTD_MTD_H__ */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 5236904959e..49ff80fd3aa 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -2,10 +2,10 @@ * linux/include/linux/mtd/nand.h * * Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com> - * Steven J. Hill <sjhill@cotw.com> - * Thomas Gleixner <gleixner@autronix.de> + * Steven J. Hill <sjhill@realitydiluted.com> + * Thomas Gleixner <tglx@linutronix.de> * - * $Id: nand.h,v 1.7 2003/07/24 23:30:46 a0384864 Exp $ + * $Id: nand.h,v 1.68 2004/11/12 10:40:37 gleixner Exp $ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -15,15 +15,15 @@ * Contains standard defines and IDs for NAND flash devices * * Changelog: - * 01-31-2000 DMW Created - * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers + * 01-31-2000 DMW Created + * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers * so it can be used by other NAND flash device * drivers. I also changed the copyright since none * of the original contents of this file are specific * to DoC devices. David can whack me with a baseball * bat later if I did something naughty. - * 10-11-2000 SJH Added private NAND flash structure for driver - * 10-24-2000 SJH Added prototype for 'nand_scan' function + * 10-11-2000 SJH Added private NAND flash structure for driver + * 10-24-2000 SJH Added prototype for 'nand_scan' function * 10-29-2001 TG changed nand_chip structure to support * hardwarespecific function for accessing control lines * 02-21-2002 TG added support for different read/write adress and @@ -32,10 +32,65 @@ * command delay times for different chips * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate * defines in jffs2/wbuf.c + * 08-07-2002 TG forced bad block location to byte 5 of OOB, even if + * CONFIG_MTD_NAND_ECC_JFFS2 is not set + * 08-10-2002 TG extensions to nand_chip structure to support HW-ECC + * + * 08-29-2002 tglx nand_chip structure: data_poi for selecting + * internal / fs-driver buffer + * support for 6byte/512byte hardware ECC + * read_ecc, write_ecc extended for different oob-layout + * oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB, + * NAND_YAFFS_OOB + * 11-25-2002 tglx Added Manufacturer code FUJITSU, NATIONAL + * Split manufacturer and device ID structures + * + * 02-08-2004 tglx added option field to nand structure for chip anomalities + * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id + * update of nand_chip structure description */ #ifndef __LINUX_MTD_NAND_H #define __LINUX_MTD_NAND_H +#include <linux/mtd/compat.h> +#include <linux/mtd/mtd.h> + +struct mtd_info; +/* Scan and identify a NAND device */ +extern int nand_scan (struct mtd_info *mtd, int max_chips); +/* Free resources held by the NAND device */ +extern void nand_release (struct mtd_info *mtd); + +/* Read raw data from the device without ECC */ +extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen); + + +/* This constant declares the max. oobsize / page, which + * is supported now. If you add a chip with bigger oobsize/page + * adjust this accordingly. + */ +#define NAND_MAX_OOBSIZE 64 + +/* + * Constants for hardware specific CLE/ALE/NCE function +*/ +/* Select the chip by setting nCE to low */ +#define NAND_CTL_SETNCE 1 +/* Deselect the chip by setting nCE to high */ +#define NAND_CTL_CLRNCE 2 +/* Select the command latch by setting CLE to high */ +#define NAND_CTL_SETCLE 3 +/* Deselect the command latch by setting CLE to low */ +#define NAND_CTL_CLRCLE 4 +/* Select the address latch by setting ALE to high */ +#define NAND_CTL_SETALE 5 +/* Deselect the address latch by setting ALE to low */ +#define NAND_CTL_CLRALE 6 +/* Set write protection by setting WP to high. Not used! */ +#define NAND_CTL_SETWP 7 +/* Clear write protection by setting WP to low. Not used! */ +#define NAND_CTL_CLRWP 8 + /* * Standard NAND flash commands */ @@ -45,12 +100,104 @@ #define NAND_CMD_READOOB 0x50 #define NAND_CMD_ERASE1 0x60 #define NAND_CMD_STATUS 0x70 +#define NAND_CMD_STATUS_MULTI 0x71 #define NAND_CMD_SEQIN 0x80 #define NAND_CMD_READID 0x90 #define NAND_CMD_ERASE2 0xd0 #define NAND_CMD_RESET 0xff +/* Extended commands for large page devices */ +#define NAND_CMD_READSTART 0x30 +#define NAND_CMD_CACHEDPROG 0x15 + +/* Status bits */ +#define NAND_STATUS_FAIL 0x01 +#define NAND_STATUS_FAIL_N1 0x02 +#define NAND_STATUS_TRUE_READY 0x20 +#define NAND_STATUS_READY 0x40 +#define NAND_STATUS_WP 0x80 + /* + * Constants for ECC_MODES + */ + +/* No ECC. Usage is not recommended ! */ +#define NAND_ECC_NONE 0 +/* Software ECC 3 byte ECC per 256 Byte data */ +#define NAND_ECC_SOFT 1 +/* Hardware ECC 3 byte ECC per 256 Byte data */ +#define NAND_ECC_HW3_256 2 +/* Hardware ECC 3 byte ECC per 512 Byte data */ +#define NAND_ECC_HW3_512 3 +/* Hardware ECC 3 byte ECC per 512 Byte data */ +#define NAND_ECC_HW6_512 4 +/* Hardware ECC 8 byte ECC per 512 Byte data */ +#define NAND_ECC_HW8_512 6 +/* Hardware ECC 12 byte ECC per 2048 Byte data */ +#define NAND_ECC_HW12_2048 7 + +/* + * Constants for Hardware ECC +*/ +/* Reset Hardware ECC for read */ +#define NAND_ECC_READ 0 +/* Reset Hardware ECC for write */ +#define NAND_ECC_WRITE 1 +/* Enable Hardware ECC before syndrom is read back from flash */ +#define NAND_ECC_READSYN 2 + +/* Option constants for bizarre disfunctionality and real +* features +*/ +/* Chip can not auto increment pages */ +#define NAND_NO_AUTOINCR 0x00000001 +/* Buswitdh is 16 bit */ +#define NAND_BUSWIDTH_16 0x00000002 +/* Device supports partial programming without padding */ +#define NAND_NO_PADDING 0x00000004 +/* Chip has cache program function */ +#define NAND_CACHEPRG 0x00000008 +/* Chip has copy back function */ +#define NAND_COPYBACK 0x00000010 +/* AND Chip which has 4 banks and a confusing page / block + * assignment. See Renesas datasheet for further information */ +#define NAND_IS_AND 0x00000020 +/* Chip has a array of 4 pages which can be read without + * additional ready /busy waits */ +#define NAND_4PAGE_ARRAY 0x00000040 + +/* Options valid for Samsung large page devices */ +#define NAND_SAMSUNG_LP_OPTIONS \ + (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK) + +/* Macros to identify the above */ +#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR)) +#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) +#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) +#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) + +/* Mask to zero out the chip options, which come from the id table */ +#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR) + +/* Non chip related options */ +/* Use a flash based bad block table. This option is passed to the + * default bad block table function. */ +#define NAND_USE_FLASH_BBT 0x00010000 +/* The hw ecc generator provides a syndrome instead a ecc value on read + * This can only work if we have the ecc bytes directly behind the + * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */ +#define NAND_HWECC_SYNDROME 0x00020000 + + +/* Options set by nand scan */ +/* Nand scan has allocated oob_buf */ +#define NAND_OOBBUF_ALLOC 0x40000000 +/* Nand scan has allocated data_buf */ +#define NAND_DATABUF_ALLOC 0x80000000 + + +/* + * nand_state_t - chip states * Enumeration for NAND flash chip state */ typedef enum { @@ -58,71 +205,138 @@ typedef enum { FL_READING, FL_WRITING, FL_ERASING, - FL_SYNCING + FL_SYNCING, + FL_CACHEDPRG, } nand_state_t; +/* Keep gcc happy */ +struct nand_chip; -/* - * NAND Private Flash Chip Data - * - * Structure overview: - * - * IO_ADDR - address to access the 8 I/O lines of the flash device - * - * hwcontrol - hardwarespecific function for accesing control-lines - * - * dev_ready - hardwarespecific function for accesing device ready/busy line - * - * chip_lock - spinlock used to protect access to this structure - * - * wq - wait queue to sleep on if a NAND operation is in progress - * - * state - give the current state of the NAND device - * - * page_shift - number of address bits in a page (column address bits) - * - * data_buf - data buffer passed to/from MTD user modules - * - * data_cache - data cache for redundant page access and shadow for - * ECC failure - * - * ecc_code_buf - used only for holding calculated or read ECCs for - * a page read or written when ECC is in use - * - * reserved - padding to make structure fall on word boundary if - * when ECC is in use +#if 0 +/** + * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices + * @lock: protection lock + * @active: the mtd device which holds the controller currently */ -struct Nand { - char floor, chip; - unsigned long curadr; - unsigned char curmode; - /* Also some erase/write/pipeline info when we get that far */ +struct nand_hw_control { + spinlock_t lock; + struct nand_chip *active; }; +#endif + +/** + * struct nand_chip - NAND Private Flash Chip Data + * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device + * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device + * @read_byte: [REPLACEABLE] read one byte from the chip + * @write_byte: [REPLACEABLE] write one byte to the chip + * @read_word: [REPLACEABLE] read one word from the chip + * @write_word: [REPLACEABLE] write one word to the chip + * @write_buf: [REPLACEABLE] write data from the buffer to the chip + * @read_buf: [REPLACEABLE] read data from the chip into the buffer + * @verify_buf: [REPLACEABLE] verify buffer contents against the chip data + * @select_chip: [REPLACEABLE] select chip nr + * @block_bad: [REPLACEABLE] check, if the block is bad + * @block_markbad: [REPLACEABLE] mark the block bad + * @hwcontrol: [BOARDSPECIFIC] hardwarespecific function for accesing control-lines + * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line + * If set to NULL no access to ready/busy is available and the ready/busy information + * is read from the chip status register + * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip + * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready + * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware + * @correct_data: [REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw) + * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only + * be provided if a hardware ECC is available + * @erase_cmd: [INTERN] erase command write function, selectable due to AND support + * @scan_bbt: [REPLACEABLE] function to scan bad block table + * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines + * @eccsize: [INTERN] databytes used per ecc-calculation + * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step + * @eccsteps: [INTERN] number of ecc calculation steps per page + * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR) + * @chip_lock: [INTERN] spinlock used to protect access to this structure and the chip + * @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress + * @state: [INTERN] the current state of the NAND device + * @page_shift: [INTERN] number of address bits in a page (column address bits) + * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock + * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry + * @chip_shift: [INTERN] number of address bits in one chip + * @data_buf: [INTERN] internal buffer for one page + oob + * @oob_buf: [INTERN] oob buffer for one eraseblock + * @oobdirty: [INTERN] indicates that oob_buf must be reinitialized + * @data_poi: [INTERN] pointer to a data buffer + * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about + * special functionality. See the defines for further explanation + * @badblockpos: [INTERN] position of the bad block marker in the oob area + * @numchips: [INTERN] number of physical chips + * @chipsize: [INTERN] the size of one chip for multichip arrays + * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 + * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf + * @autooob: [REPLACEABLE] the default (auto)placement scheme + * @bbt: [INTERN] bad block table pointer + * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup + * @bbt_md: [REPLACEABLE] bad block table mirror descriptor + * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan + * @controller: [OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices + * @priv: [OPTIONAL] pointer to private chip date + */ struct nand_chip { - int page_shift; - u_char *data_buf; - u_char *data_cache; - int cache_page; - u_char ecc_code_buf[6]; - u_char reserved[2]; - char ChipID; /* Type of DiskOnChip */ - struct Nand *chips; - int chipshift; - char* chips_name; - unsigned long erasesize; - unsigned long mfr; /* Flash IDs - only one type of flash per device */ - unsigned long id; - char* name; - int numchips; - char page256; - char pageadrlen; - unsigned long IO_ADDR; /* address to access the 8 I/O lines to the flash device */ - unsigned long totlen; - uint oobblock; /* Size of OOB blocks (e.g. 512) */ - uint oobsize; /* Amount of OOB data per block (e.g. 16) */ - uint eccsize; - int bus16; + void __iomem *IO_ADDR_R; + void __iomem *IO_ADDR_W; + + u_char (*read_byte)(struct mtd_info *mtd); + void (*write_byte)(struct mtd_info *mtd, u_char byte); + u16 (*read_word)(struct mtd_info *mtd); + void (*write_word)(struct mtd_info *mtd, u16 word); + + void (*write_buf)(struct mtd_info *mtd, const u_char *buf, int len); + void (*read_buf)(struct mtd_info *mtd, u_char *buf, int len); + int (*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len); + void (*select_chip)(struct mtd_info *mtd, int chip); + int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); + int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); + void (*hwcontrol)(struct mtd_info *mtd, int cmd); + int (*dev_ready)(struct mtd_info *mtd); + void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); + int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state); + int (*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); + int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); + void (*enable_hwecc)(struct mtd_info *mtd, int mode); + void (*erase_cmd)(struct mtd_info *mtd, int page); + int (*scan_bbt)(struct mtd_info *mtd); + int eccmode; + int eccsize; + int eccbytes; + int eccsteps; + int chip_delay; +#if 0 + spinlock_t chip_lock; + wait_queue_head_t wq; + nand_state_t state; +#endif + int page_shift; + int phys_erase_shift; + int bbt_erase_shift; + int chip_shift; + u_char *data_buf; + u_char *oob_buf; + int oobdirty; + u_char *data_poi; + unsigned int options; + int badblockpos; + int numchips; + unsigned long chipsize; + int pagemask; + int pagebuf; + struct nand_oobinfo *autooob; + uint8_t *bbt; + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; + struct nand_bbt_descr *badblock_pattern; + struct nand_hw_control *controller; + void *priv; }; /* @@ -130,71 +344,126 @@ struct nand_chip { */ #define NAND_MFR_TOSHIBA 0x98 #define NAND_MFR_SAMSUNG 0xec +#define NAND_MFR_FUJITSU 0x04 +#define NAND_MFR_NATIONAL 0x8f +#define NAND_MFR_RENESAS 0x07 +#define NAND_MFR_STMICRO 0x20 +#define NAND_MFR_MICRON 0x2c -/* - * NAND Flash Device ID Structure - * - * Structure overview: - * - * name - Complete name of device - * - * manufacture_id - manufacturer ID code of device. - * - * model_id - model ID code of device. +/** + * struct nand_flash_dev - NAND Flash Device ID Structure * - * chipshift - total number of address bits for the device which - * is used to calculate address offsets and the total - * number of bytes the device is capable of. - * - * page256 - denotes if flash device has 256 byte pages or not. - * - * pageadrlen - number of bytes minus one needed to hold the - * complete address into the flash array. Keep in - * mind that when a read or write is done to a - * specific address, the address is input serially - * 8 bits at a time. This structure member is used - * by the read/write routines as a loop index for - * shifting the address out 8 bits at a time. - * - * erasesize - size of an erase block in the flash device. + * @name: Identify the device type + * @id: device ID code + * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 + * If the pagesize is 0, then the real pagesize + * and the eraseize are determined from the + * extended id bytes in the chip + * @erasesize: Size of an erase block in the flash device. + * @chipsize: Total chipsize in Mega Bytes + * @options: Bitfield to store chip relevant options */ struct nand_flash_dev { - char * name; - int manufacture_id; - int model_id; - int chipshift; - char page256; - char pageadrlen; + char *name; + int id; + unsigned long pagesize; + unsigned long chipsize; unsigned long erasesize; - int bus16; + unsigned long options; }; +/** + * struct nand_manufacturers - NAND Flash Manufacturer ID Structure + * @name: Manufacturer name + * @id: manufacturer ID code of device. +*/ +struct nand_manufacturers { + int id; + char * name; +}; + +extern struct nand_flash_dev nand_flash_ids[]; +extern struct nand_manufacturers nand_manuf_ids[]; + +/** + * struct nand_bbt_descr - bad block table descriptor + * @options: options for this descriptor + * @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE + * when bbt is searched, then we store the found bbts pages here. + * Its an array and supports up to 8 chips now + * @offs: offset of the pattern in the oob area of the page + * @veroffs: offset of the bbt version counter in the oob are of the page + * @version: version read from the bbt page during scan + * @len: length of the pattern, if 0 no pattern check is performed + * @maxblocks: maximum number of blocks to search for a bbt. This number of + * blocks is reserved at the end of the device where the tables are + * written. + * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than + * bad) block in the stored bbt + * @pattern: pattern to identify bad block table or factory marked good / + * bad blocks, can be NULL, if len = 0 + * + * Descriptor for the bad block table marker and the descriptor for the + * pattern which identifies good and bad blocks. The assumption is made + * that the pattern and the version count are always located in the oob area + * of the first block. + */ +struct nand_bbt_descr { + int options; + int pages[NAND_MAX_CHIPS]; + int offs; + int veroffs; + uint8_t version[NAND_MAX_CHIPS]; + int len; + int maxblocks; + int reserved_block_code; + uint8_t *pattern; +}; + +/* Options for the bad block table descriptors */ + +/* The number of bits used per block in the bbt on the device */ +#define NAND_BBT_NRBITS_MSK 0x0000000F +#define NAND_BBT_1BIT 0x00000001 +#define NAND_BBT_2BIT 0x00000002 +#define NAND_BBT_4BIT 0x00000004 +#define NAND_BBT_8BIT 0x00000008 +/* The bad block table is in the last good block of the device */ +#define NAND_BBT_LASTBLOCK 0x00000010 +/* The bbt is at the given page, else we must scan for the bbt */ +#define NAND_BBT_ABSPAGE 0x00000020 +/* The bbt is at the given page, else we must scan for the bbt */ +#define NAND_BBT_SEARCH 0x00000040 +/* bbt is stored per chip on multichip devices */ +#define NAND_BBT_PERCHIP 0x00000080 +/* bbt has a version counter at offset veroffs */ +#define NAND_BBT_VERSION 0x00000100 +/* Create a bbt if none axists */ +#define NAND_BBT_CREATE 0x00000200 +/* Search good / bad pattern through all pages of a block */ +#define NAND_BBT_SCANALLPAGES 0x00000400 +/* Scan block empty during good / bad block scan */ +#define NAND_BBT_SCANEMPTY 0x00000800 +/* Write bbt if neccecary */ +#define NAND_BBT_WRITE 0x00001000 +/* Read and write back block contents when writing bbt */ +#define NAND_BBT_SAVECONTENT 0x00002000 +/* Search good / bad pattern on the first and the second page */ +#define NAND_BBT_SCAN2NDPAGE 0x00004000 + +/* The maximum number of blocks to scan for a bbt */ +#define NAND_BBT_SCAN_MAXBLOCKS 4 + +extern int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd); +extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs); +extern int nand_default_bbt (struct mtd_info *mtd); +extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt); +extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt); + /* * Constants for oob configuration */ -#define NAND_NOOB_ECCPOS0 0 -#define NAND_NOOB_ECCPOS1 1 -#define NAND_NOOB_ECCPOS2 2 -#define NAND_NOOB_ECCPOS3 3 -#define NAND_NOOB_ECCPOS4 6 -#define NAND_NOOB_ECCPOS5 7 -#define NAND_NOOB_BADBPOS -1 -#define NAND_NOOB_ECCVPOS -1 - -#define NAND_JFFS2_OOB_ECCPOS0 0 -#define NAND_JFFS2_OOB_ECCPOS1 1 -#define NAND_JFFS2_OOB_ECCPOS2 2 -#define NAND_JFFS2_OOB_ECCPOS3 3 -#define NAND_JFFS2_OOB_ECCPOS4 6 -#define NAND_JFFS2_OOB_ECCPOS5 7 -#define NAND_JFFS2_OOB_BADBPOS 5 -#define NAND_JFFS2_OOB_ECCVPOS 4 - -#define NAND_JFFS2_OOB8_FSDAPOS 6 -#define NAND_JFFS2_OOB16_FSDAPOS 8 -#define NAND_JFFS2_OOB8_FSDALEN 2 -#define NAND_JFFS2_OOB16_FSDALEN 8 - -unsigned long nand_probe(unsigned long physadr); +#define NAND_SMALL_BADBLOCK_POS 5 +#define NAND_LARGE_BADBLOCK_POS 0 #endif /* __LINUX_MTD_NAND_H */ diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h new file mode 100644 index 00000000000..12c5bc342ea --- /dev/null +++ b/include/linux/mtd/nand_ecc.h @@ -0,0 +1,30 @@ +/* + * drivers/mtd/nand_ecc.h + * + * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) + * + * $Id: nand_ecc.h,v 1.4 2004/06/17 02:35:02 dbrown Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file is the header for the ECC algorithm. + */ + +#ifndef __MTD_NAND_ECC_H__ +#define __MTD_NAND_ECC_H__ + +struct mtd_info; + +/* + * Calculate 3 byte ECC code for 256 byte block + */ +int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); + +/* + * Detect and correct a 1 bit error for 256 byte block + */ +int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); + +#endif /* __MTD_NAND_ECC_H__ */ diff --git a/include/linux/mtd/nand_ids.h b/include/linux/mtd/nand_ids.h index a3d0363a2a5..dbdd15c035b 100644 --- a/include/linux/mtd/nand_ids.h +++ b/include/linux/mtd/nand_ids.h @@ -28,6 +28,10 @@ #ifndef __LINUX_MTD_NAND_IDS_H #define __LINUX_MTD_NAND_IDS_H +#ifndef CFG_NAND_LEGACY +#error This module is for the legacy NAND support +#endif + static struct nand_flash_dev nand_flash_ids[] = { {"Toshiba TC5816BDC", NAND_MFR_TOSHIBA, 0x64, 21, 1, 2, 0x1000, 0}, {"Toshiba TC5832DC", NAND_MFR_TOSHIBA, 0x6b, 22, 0, 2, 0x2000, 0}, @@ -49,6 +53,8 @@ static struct nand_flash_dev nand_flash_ids[] = { {"Samsung KM29W16000", NAND_MFR_SAMSUNG, 0xea, 21, 1, 2, 0x1000, 0}, {"Samsung K9F5616Q0C", NAND_MFR_SAMSUNG, 0x45, 25, 0, 2, 0x4000, 1}, {"Samsung K9K1216Q0C", NAND_MFR_SAMSUNG, 0x46, 26, 0, 3, 0x4000, 1}, + {"Samsung K9F1G08U0M", NAND_MFR_SAMSUNG, 0xf1, 27, 0, 2, 0, 0}, + {"Micron MT29F2G16ABD", NAND_MFR_MICRON, 0xba, 26, 0, 3, 0x20000, 1}, /* large block won't work*/ {NULL,} }; diff --git a/include/linux/mtd/nand_legacy.h b/include/linux/mtd/nand_legacy.h new file mode 100644 index 00000000000..dae7d8923fc --- /dev/null +++ b/include/linux/mtd/nand_legacy.h @@ -0,0 +1,204 @@ +/* + * linux/include/linux/mtd/nand.h + * + * Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com> + * Steven J. Hill <sjhill@cotw.com> + * Thomas Gleixner <gleixner@autronix.de> + * + * $Id: nand.h,v 1.7 2003/07/24 23:30:46 a0384864 Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Info: + * Contains standard defines and IDs for NAND flash devices + * + * Changelog: + * 01-31-2000 DMW Created + * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers + * so it can be used by other NAND flash device + * drivers. I also changed the copyright since none + * of the original contents of this file are specific + * to DoC devices. David can whack me with a baseball + * bat later if I did something naughty. + * 10-11-2000 SJH Added private NAND flash structure for driver + * 10-24-2000 SJH Added prototype for 'nand_scan' function + * 10-29-2001 TG changed nand_chip structure to support + * hardwarespecific function for accessing control lines + * 02-21-2002 TG added support for different read/write adress and + * ready/busy line access function + * 02-26-2002 TG added chip_delay to nand_chip structure to optimize + * command delay times for different chips + * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate + * defines in jffs2/wbuf.c + */ +#ifndef __LINUX_MTD_NAND_LEGACY_H +#define __LINUX_MTD_NAND_LEGACY_H + +#ifndef CFG_NAND_LEGACY +#error This module is for the legacy NAND support +#endif + +/* + * Standard NAND flash commands + */ +#define NAND_CMD_READ0 0 +#define NAND_CMD_READ1 1 +#define NAND_CMD_PAGEPROG 0x10 +#define NAND_CMD_READOOB 0x50 +#define NAND_CMD_ERASE1 0x60 +#define NAND_CMD_STATUS 0x70 +#define NAND_CMD_SEQIN 0x80 +#define NAND_CMD_READID 0x90 +#define NAND_CMD_ERASE2 0xd0 +#define NAND_CMD_RESET 0xff + +/* + * Enumeration for NAND flash chip state + */ +typedef enum { + FL_READY, + FL_READING, + FL_WRITING, + FL_ERASING, + FL_SYNCING +} nand_state_t; + + +/* + * NAND Private Flash Chip Data + * + * Structure overview: + * + * IO_ADDR - address to access the 8 I/O lines of the flash device + * + * hwcontrol - hardwarespecific function for accesing control-lines + * + * dev_ready - hardwarespecific function for accesing device ready/busy line + * + * chip_lock - spinlock used to protect access to this structure + * + * wq - wait queue to sleep on if a NAND operation is in progress + * + * state - give the current state of the NAND device + * + * page_shift - number of address bits in a page (column address bits) + * + * data_buf - data buffer passed to/from MTD user modules + * + * data_cache - data cache for redundant page access and shadow for + * ECC failure + * + * ecc_code_buf - used only for holding calculated or read ECCs for + * a page read or written when ECC is in use + * + * reserved - padding to make structure fall on word boundary if + * when ECC is in use + */ +struct Nand { + char floor, chip; + unsigned long curadr; + unsigned char curmode; + /* Also some erase/write/pipeline info when we get that far */ +}; + +struct nand_chip { + int page_shift; + u_char *data_buf; + u_char *data_cache; + int cache_page; + u_char ecc_code_buf[6]; + u_char reserved[2]; + char ChipID; /* Type of DiskOnChip */ + struct Nand *chips; + int chipshift; + char* chips_name; + unsigned long erasesize; + unsigned long mfr; /* Flash IDs - only one type of flash per device */ + unsigned long id; + char* name; + int numchips; + char page256; + char pageadrlen; + unsigned long IO_ADDR; /* address to access the 8 I/O lines to the flash device */ + unsigned long totlen; + uint oobblock; /* Size of OOB blocks (e.g. 512) */ + uint oobsize; /* Amount of OOB data per block (e.g. 16) */ + uint eccsize; + int bus16; +}; + +/* + * NAND Flash Manufacturer ID Codes + */ +#define NAND_MFR_TOSHIBA 0x98 +#define NAND_MFR_SAMSUNG 0xec +#define NAND_MFR_MICRON 0x2c + +/* + * NAND Flash Device ID Structure + * + * Structure overview: + * + * name - Complete name of device + * + * manufacture_id - manufacturer ID code of device. + * + * model_id - model ID code of device. + * + * chipshift - total number of address bits for the device which + * is used to calculate address offsets and the total + * number of bytes the device is capable of. + * + * page256 - denotes if flash device has 256 byte pages or not. + * + * pageadrlen - number of bytes minus one needed to hold the + * complete address into the flash array. Keep in + * mind that when a read or write is done to a + * specific address, the address is input serially + * 8 bits at a time. This structure member is used + * by the read/write routines as a loop index for + * shifting the address out 8 bits at a time. + * + * erasesize - size of an erase block in the flash device. + */ +struct nand_flash_dev { + char * name; + int manufacture_id; + int model_id; + int chipshift; + char page256; + char pageadrlen; + unsigned long erasesize; + int bus16; +}; + +/* +* Constants for oob configuration +*/ +#define NAND_NOOB_ECCPOS0 0 +#define NAND_NOOB_ECCPOS1 1 +#define NAND_NOOB_ECCPOS2 2 +#define NAND_NOOB_ECCPOS3 3 +#define NAND_NOOB_ECCPOS4 6 +#define NAND_NOOB_ECCPOS5 7 +#define NAND_NOOB_BADBPOS -1 +#define NAND_NOOB_ECCVPOS -1 + +#define NAND_JFFS2_OOB_ECCPOS0 0 +#define NAND_JFFS2_OOB_ECCPOS1 1 +#define NAND_JFFS2_OOB_ECCPOS2 2 +#define NAND_JFFS2_OOB_ECCPOS3 3 +#define NAND_JFFS2_OOB_ECCPOS4 6 +#define NAND_JFFS2_OOB_ECCPOS5 7 +#define NAND_JFFS2_OOB_BADBPOS 5 +#define NAND_JFFS2_OOB_ECCVPOS 4 + +#define NAND_JFFS2_OOB8_FSDAPOS 6 +#define NAND_JFFS2_OOB16_FSDAPOS 8 +#define NAND_JFFS2_OOB8_FSDALEN 2 +#define NAND_JFFS2_OOB16_FSDALEN 8 + +unsigned long nand_probe(unsigned long physadr); +#endif /* __LINUX_MTD_NAND_LEGACY_H */ diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h new file mode 100644 index 00000000000..6f27280a631 --- /dev/null +++ b/include/linux/mtd/onenand.h @@ -0,0 +1,143 @@ +/* + * linux/include/linux/mtd/onenand.h + * + * Copyright (C) 2005 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MTD_ONENAND_H +#define __LINUX_MTD_ONENAND_H + +#include <linux/mtd/onenand_regs.h> + +/* Note: The header order is impoertant */ +#include <onenand_uboot.h> + +#include <linux/mtd/bbm.h> + +#define MAX_BUFFERRAM 2 +#define MAX_ONENAND_PAGESIZE (2048 + 64) + +/* Scan and identify a OneNAND device */ +extern int onenand_scan(struct mtd_info *mtd, int max_chips); +/* Free resources held by the OneNAND device */ +extern void onenand_release(struct mtd_info *mtd); + +/** + * onenand_state_t - chip states + * Enumeration for OneNAND flash chip state + */ +typedef enum { + FL_READY, + FL_READING, + FL_WRITING, + FL_ERASING, + FL_SYNCING, + FL_UNLOCKING, + FL_LOCKING, + FL_RESETING, +} onenand_state_t; + +/** + * struct onenand_bufferram - OneNAND BufferRAM Data + * @param block block address in BufferRAM + * @param page page address in BufferRAM + * @param valid valid flag + */ +struct onenand_bufferram { + int block; + int page; + int valid; +}; + +/** + * struct onenand_chip - OneNAND Private Flash Chip Data + * @param base [BOARDSPECIFIC] address to access OneNAND + * @param chipsize [INTERN] the size of one chip for multichip arrays + * @param device_id [INTERN] device ID + * @param verstion_id [INTERN] version ID + * @param options [BOARDSPECIFIC] various chip options. They can partly be set to inform onenand_scan about + * @param erase_shift [INTERN] number of address bits in a block + * @param page_shift [INTERN] number of address bits in a page + * @param ppb_shift [INTERN] number of address bits in a pages per block + * @param page_mask [INTERN] a page per block mask + * @param bufferam_index [INTERN] BufferRAM index + * @param bufferam [INTERN] BufferRAM info + * @param readw [REPLACEABLE] hardware specific function for read short + * @param writew [REPLACEABLE] hardware specific function for write short + * @param command [REPLACEABLE] hardware specific function for writing commands to the chip + * @param wait [REPLACEABLE] hardware specific function for wait on ready + * @param read_bufferram [REPLACEABLE] hardware specific function for BufferRAM Area + * @param write_bufferram [REPLACEABLE] hardware specific function for BufferRAM Area + * @param chip_lock [INTERN] spinlock used to protect access to this structure and the chip + * @param wq [INTERN] wait queue to sleep on if a OneNAND operation is in progress + * @param state [INTERN] the current state of the OneNAND device + * @param autooob [REPLACEABLE] the default (auto)placement scheme + * @param priv [OPTIONAL] pointer to private chip date + */ +struct onenand_chip { + void __iomem *base; + unsigned int chipsize; + unsigned int device_id; + unsigned int options; + + unsigned int erase_shift; + unsigned int page_shift; + unsigned int ppb_shift; /* Pages per block shift */ + unsigned int page_mask; + + unsigned int bufferram_index; + struct onenand_bufferram bufferram[MAX_BUFFERRAM]; + + int (*command)(struct mtd_info *mtd, int cmd, loff_t address, size_t len); + int (*wait)(struct mtd_info *mtd, int state); + int (*read_bufferram)(struct mtd_info *mtd, int area, + unsigned char *buffer, int offset, size_t count); + int (*write_bufferram)(struct mtd_info *mtd, int area, + const unsigned char *buffer, int offset, size_t count); + unsigned short (*read_word)(void __iomem *addr); + void (*write_word)(unsigned short value, void __iomem *addr); + void (*mmcontrol)(struct mtd_info *mtd, int sync_read); + + spinlock_t chip_lock; + wait_queue_head_t wq; + onenand_state_t state; + + struct nand_oobinfo *autooob; + + void *bbm; + + void *priv; +}; + +#define ONENAND_CURRENT_BUFFERRAM(this) (this->bufferram_index) +#define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1) +#define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1) + +/* + * Options bits + */ +#define ONENAND_CONT_LOCK (0x0001) + + +/* + * OneNAND Flash Manufacturer ID Codes + */ +#define ONENAND_MFR_SAMSUNG 0xec +#define ONENAND_MFR_UNKNOWN 0x00 + +/** + * struct nand_manufacturers - NAND Flash Manufacturer ID Structure + * @param name: Manufacturer name + * @param id: manufacturer ID code of device. +*/ +struct onenand_manufacturers { + int id; + char *name; +}; + +#endif /* __LINUX_MTD_ONENAND_H */ diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h new file mode 100644 index 00000000000..d7832ef8ed6 --- /dev/null +++ b/include/linux/mtd/onenand_regs.h @@ -0,0 +1,180 @@ +/* + * linux/include/linux/mtd/onenand_regs.h + * + * OneNAND Register header file + * + * Copyright (C) 2005 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ONENAND_REG_H +#define __ONENAND_REG_H + +/* Memory Address Map Translation (Word order) */ +#define ONENAND_MEMORY_MAP(x) ((x) << 1) + +/* + * External BufferRAM area + */ +#define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000) +#define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200) +#define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010) + +/* + * OneNAND Registers + */ +#define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000) +#define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001) +#define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002) +#define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003) +#define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004) +#define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005) +#define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006) + +#define ONENAND_REG_START_ADDRESS1 ONENAND_MEMORY_MAP(0xF100) +#define ONENAND_REG_START_ADDRESS2 ONENAND_MEMORY_MAP(0xF101) +#define ONENAND_REG_START_ADDRESS3 ONENAND_MEMORY_MAP(0xF102) +#define ONENAND_REG_START_ADDRESS4 ONENAND_MEMORY_MAP(0xF103) +#define ONENAND_REG_START_ADDRESS5 ONENAND_MEMORY_MAP(0xF104) +#define ONENAND_REG_START_ADDRESS6 ONENAND_MEMORY_MAP(0xF105) +#define ONENAND_REG_START_ADDRESS7 ONENAND_MEMORY_MAP(0xF106) +#define ONENAND_REG_START_ADDRESS8 ONENAND_MEMORY_MAP(0xF107) + +#define ONENAND_REG_START_BUFFER ONENAND_MEMORY_MAP(0xF200) +#define ONENAND_REG_COMMAND ONENAND_MEMORY_MAP(0xF220) +#define ONENAND_REG_SYS_CFG1 ONENAND_MEMORY_MAP(0xF221) +#define ONENAND_REG_SYS_CFG2 ONENAND_MEMORY_MAP(0xF222) +#define ONENAND_REG_CTRL_STATUS ONENAND_MEMORY_MAP(0xF240) +#define ONENAND_REG_INTERRUPT ONENAND_MEMORY_MAP(0xF241) +#define ONENAND_REG_START_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24C) +#define ONENAND_REG_END_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24D) +#define ONENAND_REG_WP_STATUS ONENAND_MEMORY_MAP(0xF24E) + +#define ONENAND_REG_ECC_STATUS ONENAND_MEMORY_MAP(0xFF00) +#define ONENAND_REG_ECC_M0 ONENAND_MEMORY_MAP(0xFF01) +#define ONENAND_REG_ECC_S0 ONENAND_MEMORY_MAP(0xFF02) +#define ONENAND_REG_ECC_M1 ONENAND_MEMORY_MAP(0xFF03) +#define ONENAND_REG_ECC_S1 ONENAND_MEMORY_MAP(0xFF04) +#define ONENAND_REG_ECC_M2 ONENAND_MEMORY_MAP(0xFF05) +#define ONENAND_REG_ECC_S2 ONENAND_MEMORY_MAP(0xFF06) +#define ONENAND_REG_ECC_M3 ONENAND_MEMORY_MAP(0xFF07) +#define ONENAND_REG_ECC_S3 ONENAND_MEMORY_MAP(0xFF08) + +/* + * Device ID Register F001h (R) + */ +#define ONENAND_DEVICE_DENSITY_SHIFT (4) +#define ONENAND_DEVICE_IS_DDP (1 << 3) +#define ONENAND_DEVICE_IS_DEMUX (1 << 2) +#define ONENAND_DEVICE_VCC_MASK (0x3) + +#define ONENAND_DEVICE_DENSITY_512Mb (0x002) + +/* + * Version ID Register F002h (R) + */ +#define ONENAND_VERSION_PROCESS_SHIFT (8) + +/* + * Start Address 1 F100h (R/W) + */ +#define ONENAND_DDP_SHIFT (15) + +/* + * Start Address 8 F107h (R/W) + */ +#define ONENAND_FPA_MASK (0x3f) +#define ONENAND_FPA_SHIFT (2) +#define ONENAND_FSA_MASK (0x03) + +/* + * Start Buffer Register F200h (R/W) + */ +#define ONENAND_BSA_MASK (0x03) +#define ONENAND_BSA_SHIFT (8) +#define ONENAND_BSA_BOOTRAM (0 << 2) +#define ONENAND_BSA_DATARAM0 (2 << 2) +#define ONENAND_BSA_DATARAM1 (3 << 2) +#define ONENAND_BSC_MASK (0x03) + +/* + * Command Register F220h (R/W) + */ +#define ONENAND_CMD_READ (0x00) +#define ONENAND_CMD_READOOB (0x13) +#define ONENAND_CMD_PROG (0x80) +#define ONENAND_CMD_PROGOOB (0x1A) +#define ONENAND_CMD_UNLOCK (0x23) +#define ONENAND_CMD_LOCK (0x2A) +#define ONENAND_CMD_LOCK_TIGHT (0x2C) +#define ONENAND_CMD_ERASE (0x94) +#define ONENAND_CMD_RESET (0xF0) +#define ONENAND_CMD_READID (0x90) + +/* NOTE: Those are not *REAL* commands */ +#define ONENAND_CMD_BUFFERRAM (0x1978) + +/* + * System Configuration 1 Register F221h (R, R/W) + */ +#define ONENAND_SYS_CFG1_SYNC_READ (1 << 15) +#define ONENAND_SYS_CFG1_BRL_7 (7 << 12) +#define ONENAND_SYS_CFG1_BRL_6 (6 << 12) +#define ONENAND_SYS_CFG1_BRL_5 (5 << 12) +#define ONENAND_SYS_CFG1_BRL_4 (4 << 12) +#define ONENAND_SYS_CFG1_BRL_3 (3 << 12) +#define ONENAND_SYS_CFG1_BRL_10 (2 << 12) +#define ONENAND_SYS_CFG1_BRL_9 (1 << 12) +#define ONENAND_SYS_CFG1_BRL_8 (0 << 12) +#define ONENAND_SYS_CFG1_BRL_SHIFT (12) +#define ONENAND_SYS_CFG1_BL_32 (4 << 9) +#define ONENAND_SYS_CFG1_BL_16 (3 << 9) +#define ONENAND_SYS_CFG1_BL_8 (2 << 9) +#define ONENAND_SYS_CFG1_BL_4 (1 << 9) +#define ONENAND_SYS_CFG1_BL_CONT (0 << 9) +#define ONENAND_SYS_CFG1_BL_SHIFT (9) +#define ONENAND_SYS_CFG1_NO_ECC (1 << 8) +#define ONENAND_SYS_CFG1_RDY (1 << 7) +#define ONENAND_SYS_CFG1_INT (1 << 6) +#define ONENAND_SYS_CFG1_IOBE (1 << 5) +#define ONENAND_SYS_CFG1_RDY_CONF (1 << 4) + +/* + * Controller Status Register F240h (R) + */ +#define ONENAND_CTRL_ONGO (1 << 15) +#define ONENAND_CTRL_LOCK (1 << 14) +#define ONENAND_CTRL_LOAD (1 << 13) +#define ONENAND_CTRL_PROGRAM (1 << 12) +#define ONENAND_CTRL_ERASE (1 << 11) +#define ONENAND_CTRL_ERROR (1 << 10) +#define ONENAND_CTRL_RSTB (1 << 7) + +/* + * Interrupt Status Register F241h (R) + */ +#define ONENAND_INT_MASTER (1 << 15) +#define ONENAND_INT_READ (1 << 7) +#define ONENAND_INT_WRITE (1 << 6) +#define ONENAND_INT_ERASE (1 << 5) +#define ONENAND_INT_RESET (1 << 4) +#define ONENAND_INT_CLEAR (0 << 0) + +/* + * NAND Flash Write Protection Status Register F24Eh (R) + */ +#define ONENAND_WP_US (1 << 2) +#define ONENAND_WP_LS (1 << 1) +#define ONENAND_WP_LTS (1 << 0) + +/* + * ECC Status Reigser FF00h (R) + */ +#define ONENAND_ECC_1BIT (1 << 0) +#define ONENAND_ECC_2BIT (1 << 1) +#define ONENAND_ECC_2BIT_ALL (0xAAAA) + +#endif /* __ONENAND_REG_H */ diff --git a/include/linux/stat.h b/include/linux/stat.h index 2f7a3b36acf..f9422cb1faf 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -67,7 +67,7 @@ struct stat { #endif /* __PPC__ */ -#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) +#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__blackfin__) struct stat { unsigned short st_dev; diff --git a/include/linux/string.h b/include/linux/string.h index 1a45fd3215c..62390399b0b 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -38,7 +38,7 @@ extern int strcmp(const char *,const char *); #ifndef __HAVE_ARCH_STRNCMP extern int strncmp(const char *,const char *,__kernel_size_t); #endif -#ifndef __HAVE_ARCH_STRNICMP +#if 0 /* not used - was: #ifndef __HAVE_ARCH_STRNICMP */ extern int strnicmp(const char *, const char *, __kernel_size_t); #endif #ifndef __HAVE_ARCH_STRCHR diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h index f33d8585522..50a6ac1e98d 100644 --- a/include/mpc5xxx.h +++ b/include/mpc5xxx.h @@ -131,6 +131,7 @@ #if defined(CONFIG_MGT5100) #define MPC5XXX_SDRAM_XLBSEL (MPC5XXX_SDRAM + 0x0010) #endif +#define MPC5XXX_SDRAM_SDELAY (MPC5XXX_SDRAM + 0x0090) /* Clock Distribution Module */ #define MPC5XXX_CDM_JTAGID (MPC5XXX_CDM + 0x0000) diff --git a/include/mpc85xx.h b/include/mpc85xx.h index 60b6c61fb0b..a4d99b2a165 100644 --- a/include/mpc85xx.h +++ b/include/mpc85xx.h @@ -25,4 +25,39 @@ #define SCCR_DFBRG10 0x00000002 /* BRGCLK division by 64 */ #define SCCR_DFBRG11 0x00000003 /* BRGCLK division by 256 */ +/* + * Local Bus Controller - memory controller registers + */ +#define BRx_V 0x00000001 /* Bank Valid */ +#define BRx_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */ +#define BRx_MS_SDRAM 0x00000000 /* SDRAM Machine Select */ +#define BRx_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */ +#define BRx_MS_UPMB 0x000000a0 /* U.P.M.B Machine Select */ +#define BRx_MS_UPMC 0x000000c0 /* U.P.M.C Machine Select */ +#define BRx_PS_8 0x00000800 /* 8 bit port size */ +#define BRx_PS_32 0x00001800 /* 32 bit port size */ +#define BRx_BA_MSK 0xffff8000 /* Base Address Mask */ + +#define ORxG_EAD 0x00000001 /* External addr latch delay */ +#define ORxG_EHTR 0x00000002 /* Extended hold time on read */ +#define ORxG_TRLX 0x00000004 /* Timing relaxed */ +#define ORxG_SETA 0x00000008 /* External address termination */ +#define ORxG_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */ +#define ORxG_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */ +#define ORxG_XACS 0x00000100 /* Extra addr to CS setup */ +#define ORxG_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later*/ +#define ORxG_CSNT 0x00000800 /* Chip Select Negation Time */ + +#define ORxU_BI 0x00000100 /* Burst Inhibit */ +#define ORxU_AM_MSK 0xffff8000 /* Address Mask Mask */ + +#define MxMR_OP_NORM 0x00000000 /* Normal Operation */ +#define MxMR_DSx_2_CYCL 0x00400000 /* 2 cycle Disable Period */ +#define MxMR_OP_WARR 0x10000000 /* Write to Array */ +#define MxMR_BSEL 0x80000000 /* Bus Select */ + +/* helpers to convert values into an OR address mask (GPCM mode) */ +#define P2SZ_TO_AM(s) ((~((s) - 1)) & 0xffff8000) /* must be pow of 2 */ +#define MEG_TO_AM(m) P2SZ_TO_AM((m) << 20) + #endif /* __MPC85xx_H__ */ diff --git a/include/nand.h b/include/nand.h new file mode 100644 index 00000000000..905115b3dac --- /dev/null +++ b/include/nand.h @@ -0,0 +1,63 @@ +/* + * (C) Copyright 2005 + * 2N Telekomunikace, a.s. <www.2n.cz> + * Ladislav Michl <michl@2n.cz> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _NAND_H_ +#define _NAND_H_ + +#include <linux/mtd/compat.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> + +typedef struct mtd_info nand_info_t; + +extern int nand_curr_device; +extern nand_info_t nand_info[]; + +static inline int nand_read(nand_info_t *info, ulong ofs, ulong *len, u_char *buf) +{ + return info->read(info, ofs, *len, (size_t *)len, buf); +} + +static inline int nand_write(nand_info_t *info, ulong ofs, ulong *len, u_char *buf) +{ + return info->write(info, ofs, *len, (size_t *)len, buf); +} + +static inline int nand_block_isbad(nand_info_t *info, ulong ofs) +{ + return info->block_isbad(info, ofs); +} + +static inline int nand_erase(nand_info_t *info, ulong off, ulong size) +{ + struct erase_info instr; + + instr.mtd = info; + instr.addr = off; + instr.len = size; + instr.callback = 0; + + return info->erase(info, &instr); +} + +#endif diff --git a/include/nios2-epcs.h b/include/nios2-epcs.h index 2c9522cfd89..20e0c87c89f 100644 --- a/include/nios2-epcs.h +++ b/include/nios2-epcs.h @@ -38,6 +38,11 @@ typedef struct epcs_devinfo_t { unsigned char prot_mask; /* Protection mask */ }epcs_devinfo_t; +/* Resets the epcs controller -- to prevent (potential) soft-reset + * problems when booting from the epcs controller + */ +extern int epcs_reset (void); + /* Returns the devinfo struct if EPCS device is found; * NULL otherwise. */ diff --git a/include/ns16550.h b/include/ns16550.h index e17a11edca6..293f9bd8e3e 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -1,4 +1,9 @@ /* + *This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * * NS16550 Serial Port * originally from linux source (arch/ppc/boot/ns16550.h) * modified slightly to @@ -7,6 +12,9 @@ * added prototypes for ns16550.c * reduced no of com ports to 2 * modifications (c) Rob Taylor, Flying Pig Systems. 2000. + * + * added support for port on 64-bit bus + * by Richard Danter (richard.danter@windriver.com), (C) 2005 Wind River Systems */ #if (CFG_NS16550_REG_SIZE == 1) @@ -45,15 +53,15 @@ struct NS16550 { } __attribute__ ((packed)); #elif (CFG_NS16550_REG_SIZE == 4) struct NS16550 { - unsigned long rbr; /* 0 */ - unsigned long ier; /* 1 */ - unsigned long fcr; /* 2 */ - unsigned long lcr; /* 3 */ - unsigned long mcr; /* 4 */ - unsigned long lsr; /* 5 */ - unsigned long msr; /* 6 */ - unsigned long scr; /* 7 */ -} __attribute__ ((packed)); + unsigned long rbr; /* 0 r */ + unsigned long ier; /* 1 rw */ + unsigned long fcr; /* 2 w */ + unsigned long lcr; /* 3 rw */ + unsigned long mcr; /* 4 rw */ + unsigned long lsr; /* 5 r */ + unsigned long msr; /* 6 r */ + unsigned long scr; /* 7 rw */ +}; /* No need to pack an already aligned struct */ #elif (CFG_NS16550_REG_SIZE == -4) struct NS16550 { unsigned char rbr; /* 0 */ @@ -82,6 +90,25 @@ struct NS16550 { int pad10:24; #endif } __attribute__ ((packed)); +#elif (CFG_NS16550_REG_SIZE == -8) +struct NS16550 { + unsigned char rbr; /* 0 */ + unsigned char pad0[7]; + unsigned char ier; /* 1 */ + unsigned char pad1[7]; + unsigned char fcr; /* 2 */ + unsigned char pad2[7]; + unsigned char lcr; /* 3 */ + unsigned char pad3[7]; + unsigned char mcr; /* 4 */ + unsigned char pad4[7]; + unsigned char lsr; /* 5 */ + unsigned char pad5[7]; + unsigned char msr; /* 6 */ + unsigned char pad6[7]; + unsigned char scr; /* 7 */ + unsigned char pad7[7]; +} __attribute__ ((packed)); #else #error "Please define NS16550 registers size." #endif @@ -102,7 +129,7 @@ typedef volatile struct NS16550 *NS16550_t; #define MCR_DMA_EN 0x04 #define MCR_TX_DFR 0x08 -#define LCR_WLS_MSK 0x03 /* character length slect mask */ +#define LCR_WLS_MSK 0x03 /* character length select mask */ #define LCR_WLS_5 0x00 /* 5 bit character length */ #define LCR_WLS_6 0x01 /* 6 bit character length */ #define LCR_WLS_7 0x02 /* 7 bit character length */ diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h new file mode 100644 index 00000000000..1da9b6d7afd --- /dev/null +++ b/include/onenand_uboot.h @@ -0,0 +1,117 @@ +/* + * Header file for OneNAND support for U-Boot + * + * Adaptation from kernel to U-Boot + * + * Copyright (C) 2005 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __UBOOT_ONENAND_H +#define __UBOOT_ONENAND_H + +#ifndef __iomem +#define __iomem +#endif + +#ifndef CONFIG_OMAP +#define __mem_pci(x) (x) +#endif + +#define ONENAND_DEBUG +#undef ONENAND_DEBUG + +#define DEBUG_LEVEL 1 + +#define MTD_DEBUG_LEVEL0 0 +#define MTD_DEBUG_LEVEL1 1 +#define MTD_DEBUG_LEVEL2 2 +#define MTD_DEBUG_LEVEL3 3 + +#ifdef ONENAND_DEBUG +#define DEBUG(level, args...) \ +do { \ + if (level <= DEBUG_LEVEL) { \ + printf(args); \ + } \ +} while (0) +#else +#define DEBUG(level, args...) do { } while (0) +#endif + +enum { + EAGAIN, + EIO, + EBADMSG, + ENXIO, + EINVAL, + EPERM, + ENOMEM, +}; + +#define KERN_INFO +#define KERN_ERR +#define KERN_WARNING +#define KERN_DEBUG + +#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; }) + +#define unlikely(x) (x) + +struct mtd_info { + int size; + int oobblock; + int oobsize; + int erasesize; + + void *priv; +}; + +#define MTD_ERASE_PENDING 0x01 +#define MTD_ERASING 0x02 +#define MTD_ERASE_SUSPEND 0x04 +#define MTD_ERASE_DONE 0x08 +#define MTD_ERASE_FAILED 0x10 + +struct erase_info { + struct mtd_info *mtd; + u_int32_t addr; + u_int32_t len; + u_int32_t fail_addr; + u_char state; +}; + +struct nand_oobinfo { +}; + +struct kvec { + void *iov_base; + size_t iov_len; +}; + +typedef int spinlock_t; +typedef int wait_queue_head_t; + +#define printk(args...) printf(args) + +#define mtd_erase_callback(x) do { } while (0) + +/* Functions */ +extern int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +extern int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf); +extern int onenand_write(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, const u_char *buf); +extern int onenand_erase(struct mtd_info *mtd, struct erase_info *instr); + +extern int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len); + +extern void onenand_print_device_info(int device, int verbose); + + +#endif /* __UBOOT_ONENAND_H */ diff --git a/include/pci.h b/include/pci.h index 8f199975592..0fc00e42769 100644 --- a/include/pci.h +++ b/include/pci.h @@ -309,6 +309,7 @@ struct pci_region { #define PCI_REGION_MEM 0x00000000 /* PCI memory space */ #define PCI_REGION_IO 0x00000001 /* PCI IO space */ #define PCI_REGION_TYPE 0x00000001 +#define PCI_REGION_PREFETCH 0x00000008 /* prefetchable PCI memory */ #define PCI_REGION_MEMORY 0x00000100 /* System memory */ #define PCI_REGION_RO 0x00000200 /* Read-only memory */ @@ -351,8 +352,8 @@ struct pci_config_table { unsigned long priv[3]; }; -extern void pci_cfgfunc_nothing(struct pci_controller* hose, pci_dev_t dev, - struct pci_config_table *); +extern void pci_cfgfunc_do_nothing(struct pci_controller* hose, pci_dev_t dev, + struct pci_config_table *); extern void pci_cfgfunc_config_device(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *); @@ -386,7 +387,7 @@ struct pci_controller { int (*write_dword)(struct pci_controller*, pci_dev_t, int where, u32); /* Used by auto config */ - struct pci_region *pci_mem, *pci_io; + struct pci_region *pci_mem, *pci_io, *pci_prefetch; /* Used by ppc405 autoconfig*/ struct pci_region *pci_fb; @@ -472,6 +473,7 @@ extern int pciauto_region_allocate(struct pci_region* res, unsigned int size, un extern void pciauto_setup_device(struct pci_controller *hose, pci_dev_t dev, int bars_num, struct pci_region *mem, + struct pci_region *prefetch, struct pci_region *io); int pciauto_config_device(struct pci_controller *hose, pci_dev_t dev); diff --git a/include/pci_ids.h b/include/pci_ids.h index 7dec378ad4b..8cc3ec0a235 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -510,6 +510,7 @@ #define PCI_DEVICE_ID_CT_65554 0x00e4 #define PCI_DEVICE_ID_CT_65555 0x00e5 #define PCI_DEVICE_ID_CT_69000 0x00c0 +#define PCI_DEVICE_ID_CT_69030 0x0c30 #define PCI_VENDOR_ID_MIRO 0x1031 #define PCI_DEVICE_ID_MIRO_36050 0x5601 diff --git a/include/pcmcia.h b/include/pcmcia.h index 43d4510ed25..8f564da9b8c 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -308,4 +308,14 @@ typedef struct { #endif /* CFG_CMD_PCMCIA || CFG_CMD_IDE && (CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT) */ +#ifdef CONFIG_8xx +extern u_int *pcmcia_pgcrx[]; +#define PCMCIA_PGCRX(slot) (*pcmcia_pgcrx[slot]) +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) \ + || defined(CONFIG_PXA_PCMCIA) +extern int check_ide_device(int slot); +#endif + #endif /* _PCMCIA_H */ diff --git a/include/ppc440.h b/include/ppc440.h index 018f7be8ac0..d5a9f66a419 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -25,6 +25,8 @@ /*--------------------------------------------------------------------- */ /* Special Purpose Registers */ /*--------------------------------------------------------------------- */ +#define xer_reg 0x001 +#define lr_reg 0x008 #define dec 0x016 /* decrementer */ #define srr0 0x01a /* save/restore register 0 */ #define srr1 0x01b /* save/restore register 1 */ @@ -37,6 +39,8 @@ #define ivpr 0x03f /* interrupt prefix register */ #define usprg0 0x100 /* user special purpose register general 0 */ #define usprg1 0x110 /* user special purpose register general 1 */ +#define tblr 0x10c /* time base lower, read only */ +#define tbur 0x10d /* time base upper, read only */ #define sprg1 0x111 /* special purpose register general 1 */ #define sprg2 0x112 /* special purpose register general 2 */ #define sprg3 0x113 /* special purpose register general 3 */ @@ -78,7 +82,7 @@ #define ivor13 0x19d /* interrupt vector offset register 13 */ #define ivor14 0x19e /* interrupt vector offset register 14 */ #define ivor15 0x19f /* interrupt vector offset register 15 */ -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define mcsrr0 0x23a /* machine check save/restore register 0 */ #define mcsrr1 0x23b /* mahcine check save/restore register 1 */ #define mcsr 0x23c /* machine check status register */ @@ -167,12 +171,10 @@ #define sdr_malrbl 0x02a0 #define sdr_maltbs 0x02c0 #define sdr_malrbs 0x02e0 -#define sdr_pci0 0x0300 -#define sdr_usb0 0x0320 +#define sdr_pci0 0x0300 +#define sdr_usb0 0x0320 #define sdr_cust0 0x4000 -#define sdr_sdstp2 0x4001 #define sdr_cust1 0x4002 -#define sdr_sdstp3 0x4003 #define sdr_pfc0 0x4100 /* Pin Function 0 */ #define sdr_pfc1 0x4101 /* Pin Function 1 */ #define sdr_plbtr 0x4200 @@ -212,6 +214,551 @@ #define mem_dlycal 0x0084 /* delay line calibration register */ #define mem_eccesr 0x0098 /* ECC error status */ +#ifdef CONFIG_440GX +#define sdr_amp 0x0240 +#define sdr_xpllc 0x01c1 +#define sdr_xplld 0x01c2 +#define sdr_xcr 0x01c0 +#define sdr_sdstp2 0x4001 +#define sdr_sdstp3 0x4003 +#endif /* CONFIG_440GX */ + +#ifdef CONFIG_440SPE +#undef sdr_sdstp2 +#define sdr_sdstp2 0x0022 +#undef sdr_sdstp3 +#define sdr_sdstp3 0x0023 +#define sdr_ddr0 0x00E1 +#define sdr_uart2 0x0122 +#define sdr_xcr0 0x01c0 +/* #define sdr_xcr1 0x01c3 only one PCIX - SG */ +/* #define sdr_xcr2 0x01c6 only one PCIX - SG */ +#define sdr_xpllc0 0x01c1 +#define sdr_xplld0 0x01c2 +#define sdr_xpllc1 0x01c4 /*notRCW - SG */ +#define sdr_xplld1 0x01c5 /*notRCW - SG */ +#define sdr_xpllc2 0x01c7 /*notRCW - SG */ +#define sdr_xplld2 0x01c8 /*notRCW - SG */ +#define sdr_amp0 0x0240 +#define sdr_amp1 0x0241 +#define sdr_cust2 0x4004 +#define sdr_cust3 0x4006 +#define sdr_sdstp4 0x4001 +#define sdr_sdstp5 0x4003 +#define sdr_sdstp6 0x4005 +#define sdr_sdstp7 0x4007 + +/*----------------------------------------------------------------------------+ +| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only). ++----------------------------------------------------------------------------*/ +#define CCR0_PRE 0x40000000 +#define CCR0_CRPE 0x08000000 +#define CCR0_DSTG 0x00200000 +#define CCR0_DAPUIB 0x00100000 +#define CCR0_DTB 0x00008000 +#define CCR0_GICBT 0x00004000 +#define CCR0_GDCBT 0x00002000 +#define CCR0_FLSTA 0x00000100 +#define CCR0_ICSLC_MASK 0x0000000C +#define CCR0_ICSLT_MASK 0x00000003 +#define CCR1_TCS_MASK 0x00000080 +#define CCR1_TCS_INTCLK 0x00000000 +#define CCR1_TCS_EXTCLK 0x00000080 +#define MMUCR_SEOA 0x01000000 +#define MMUCR_U1TE 0x00400000 +#define MMUCR_U2SWOAE 0x00200000 +#define MMUCR_DULXE 0x00800000 +#define MMUCR_IULXE 0x00400000 +#define MMUCR_STS 0x00100000 +#define MMUCR_STID_MASK 0x000000FF + +#define SDR0_CFGADDR 0x00E +#define SDR0_CFGDATA 0x00F + +/****************************************************************************** + * PCI express defines + ******************************************************************************/ +#define SDR0_PE0UTLSET1 0x00000300 /* PE0 Upper transaction layer conf setting */ +#define SDR0_PE0UTLSET2 0x00000301 /* PE0 Upper transaction layer conf setting 2 */ +#define SDR0_PE0DLPSET 0x00000302 /* PE0 Data link & logical physical configuration */ +#define SDR0_PE0LOOP 0x00000303 /* PE0 Loopback interface status */ +#define SDR0_PE0RCSSET 0x00000304 /* PE0 Reset, clock & shutdown setting */ +#define SDR0_PE0RCSSTS 0x00000305 /* PE0 Reset, clock & shutdown status */ +#define SDR0_PE0HSSSET1L0 0x00000306 /* PE0 HSS Control Setting 1: Lane 0 */ +#define SDR0_PE0HSSSET2L0 0x00000307 /* PE0 HSS Control Setting 2: Lane 0 */ +#define SDR0_PE0HSSSTSL0 0x00000308 /* PE0 HSS Control Status : Lane 0 */ +#define SDR0_PE0HSSSET1L1 0x00000309 /* PE0 HSS Control Setting 1: Lane 1 */ +#define SDR0_PE0HSSSET2L1 0x0000030A /* PE0 HSS Control Setting 2: Lane 1 */ +#define SDR0_PE0HSSSTSL1 0x0000030B /* PE0 HSS Control Status : Lane 1 */ +#define SDR0_PE0HSSSET1L2 0x0000030C /* PE0 HSS Control Setting 1: Lane 2 */ +#define SDR0_PE0HSSSET2L2 0x0000030D /* PE0 HSS Control Setting 2: Lane 2 */ +#define SDR0_PE0HSSSTSL2 0x0000030E /* PE0 HSS Control Status : Lane 2 */ +#define SDR0_PE0HSSSET1L3 0x0000030F /* PE0 HSS Control Setting 1: Lane 3 */ +#define SDR0_PE0HSSSET2L3 0x00000310 /* PE0 HSS Control Setting 2: Lane 3 */ +#define SDR0_PE0HSSSTSL3 0x00000311 /* PE0 HSS Control Status : Lane 3 */ +#define SDR0_PE0HSSSET1L4 0x00000312 /* PE0 HSS Control Setting 1: Lane 4 */ +#define SDR0_PE0HSSSET2L4 0x00000313 /* PE0 HSS Control Setting 2: Lane 4 */ +#define SDR0_PE0HSSSTSL4 0x00000314 /* PE0 HSS Control Status : Lane 4 */ +#define SDR0_PE0HSSSET1L5 0x00000315 /* PE0 HSS Control Setting 1: Lane 5 */ +#define SDR0_PE0HSSSET2L5 0x00000316 /* PE0 HSS Control Setting 2: Lane 5 */ +#define SDR0_PE0HSSSTSL5 0x00000317 /* PE0 HSS Control Status : Lane 5 */ +#define SDR0_PE0HSSSET1L6 0x00000318 /* PE0 HSS Control Setting 1: Lane 6 */ +#define SDR0_PE0HSSSET2L6 0x00000319 /* PE0 HSS Control Setting 2: Lane 6 */ +#define SDR0_PE0HSSSTSL6 0x0000031A /* PE0 HSS Control Status : Lane 6 */ +#define SDR0_PE0HSSSET1L7 0x0000031B /* PE0 HSS Control Setting 1: Lane 7 */ +#define SDR0_PE0HSSSET2L7 0x0000031C /* PE0 HSS Control Setting 2: Lane 7 */ +#define SDR0_PE0HSSSTSL7 0x0000031D /* PE0 HSS Control Status : Lane 7 */ +#define SDR0_PE0HSSSEREN 0x0000031E /* PE0 Serdes Transmitter Enable */ +#define SDR0_PE0LANEABCD 0x0000031F /* PE0 Lanes ABCD affectation */ +#define SDR0_PE0LANEEFGH 0x00000320 /* PE0 Lanes EFGH affectation */ + +#define SDR0_PE1UTLSET1 0x00000340 /* PE1 Upper transaction layer conf setting */ +#define SDR0_PE1UTLSET2 0x00000341 /* PE1 Upper transaction layer conf setting 2 */ +#define SDR0_PE1DLPSET 0x00000342 /* PE1 Data link & logical physical configuration */ +#define SDR0_PE1LOOP 0x00000343 /* PE1 Loopback interface status */ +#define SDR0_PE1RCSSET 0x00000344 /* PE1 Reset, clock & shutdown setting */ +#define SDR0_PE1RCSSTS 0x00000345 /* PE1 Reset, clock & shutdown status */ +#define SDR0_PE1HSSSET1L0 0x00000346 /* PE1 HSS Control Setting 1: Lane 0 */ +#define SDR0_PE1HSSSET2L0 0x00000347 /* PE1 HSS Control Setting 2: Lane 0 */ +#define SDR0_PE1HSSSTSL0 0x00000348 /* PE1 HSS Control Status : Lane 0 */ +#define SDR0_PE1HSSSET1L1 0x00000349 /* PE1 HSS Control Setting 1: Lane 1 */ +#define SDR0_PE1HSSSET2L1 0x0000034A /* PE1 HSS Control Setting 2: Lane 1 */ +#define SDR0_PE1HSSSTSL1 0x0000034B /* PE1 HSS Control Status : Lane 1 */ +#define SDR0_PE1HSSSET1L2 0x0000034C /* PE1 HSS Control Setting 1: Lane 2 */ +#define SDR0_PE1HSSSET2L2 0x0000034D /* PE1 HSS Control Setting 2: Lane 2 */ +#define SDR0_PE1HSSSTSL2 0x0000034E /* PE1 HSS Control Status : Lane 2 */ +#define SDR0_PE1HSSSET1L3 0x0000034F /* PE1 HSS Control Setting 1: Lane 3 */ +#define SDR0_PE1HSSSET2L3 0x00000350 /* PE1 HSS Control Setting 2: Lane 3 */ +#define SDR0_PE1HSSSTSL3 0x00000351 /* PE1 HSS Control Status : Lane 3 */ +#define SDR0_PE1HSSSEREN 0x00000352 /* PE1 Serdes Transmitter Enable */ +#define SDR0_PE1LANEABCD 0x00000353 /* PE1 Lanes ABCD affectation */ +#define SDR0_PE2UTLSET1 0x00000370 /* PE2 Upper transaction layer conf setting */ +#define SDR0_PE2UTLSET2 0x00000371 /* PE2 Upper transaction layer conf setting 2 */ +#define SDR0_PE2DLPSET 0x00000372 /* PE2 Data link & logical physical configuration */ +#define SDR0_PE2LOOP 0x00000373 /* PE2 Loopback interface status */ +#define SDR0_PE2RCSSET 0x00000374 /* PE2 Reset, clock & shutdown setting */ +#define SDR0_PE2RCSSTS 0x00000375 /* PE2 Reset, clock & shutdown status */ +#define SDR0_PE2HSSSET1L0 0x00000376 /* PE2 HSS Control Setting 1: Lane 0 */ +#define SDR0_PE2HSSSET2L0 0x00000377 /* PE2 HSS Control Setting 2: Lane 0 */ +#define SDR0_PE2HSSSTSL0 0x00000378 /* PE2 HSS Control Status : Lane 0 */ +#define SDR0_PE2HSSSET1L1 0x00000379 /* PE2 HSS Control Setting 1: Lane 1 */ +#define SDR0_PE2HSSSET2L1 0x0000037A /* PE2 HSS Control Setting 2: Lane 1 */ +#define SDR0_PE2HSSSTSL1 0x0000037B /* PE2 HSS Control Status : Lane 1 */ +#define SDR0_PE2HSSSET1L2 0x0000037C /* PE2 HSS Control Setting 1: Lane 2 */ +#define SDR0_PE2HSSSET2L2 0x0000037D /* PE2 HSS Control Setting 2: Lane 2 */ +#define SDR0_PE2HSSSTSL2 0x0000037E /* PE2 HSS Control Status : Lane 2 */ +#define SDR0_PE2HSSSET1L3 0x0000037F /* PE2 HSS Control Setting 1: Lane 3 */ +#define SDR0_PE2HSSSET2L3 0x00000380 /* PE2 HSS Control Setting 2: Lane 3 */ +#define SDR0_PE2HSSSTSL3 0x00000381 /* PE2 HSS Control Status : Lane 3 */ +#define SDR0_PE2HSSSEREN 0x00000382 /* PE2 Serdes Transmitter Enable */ +#define SDR0_PE2LANEABCD 0x00000383 /* PE2 Lanes ABCD affectation */ +#define SDR0_PEGPLLSET1 0x000003A0 /* PE Pll LC Tank Setting1 */ +#define SDR0_PEGPLLSET2 0x000003A1 /* PE Pll LC Tank Setting2 */ +#define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */ + +/*----------------------------------------------------------------------------+ +| SDRAM Controller ++----------------------------------------------------------------------------*/ +/*-----------------------------------------------------------------------------+ +| SDRAM DLYCAL Options ++-----------------------------------------------------------------------------*/ +#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC +#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK) +#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2) + +/*----------------------------------------------------------------------------+ +| Memory queue defines ++----------------------------------------------------------------------------*/ +/* A REVOIR versus RWC - SG*/ +#define SDRAMQ_DCR_BASE 0x040 + +#define SDRAM_R0BAS (SDRAMQ_DCR_BASE+0x0) /* rank 0 base address & size */ +#define SDRAM_R1BAS (SDRAMQ_DCR_BASE+0x1) /* rank 1 base address & size */ +#define SDRAM_R2BAS (SDRAMQ_DCR_BASE+0x2) /* rank 2 base address & size */ +#define SDRAM_R3BAS (SDRAMQ_DCR_BASE+0x3) /* rank 3 base address & size */ +#define SDRAM_CONF1HB (SDRAMQ_DCR_BASE+0x5) /* configuration 1 HB */ +#define SDRAM_ERRSTATHB (SDRAMQ_DCR_BASE+0x7) /* error status HB */ +#define SDRAM_ERRADDUHB (SDRAMQ_DCR_BASE+0x8) /* error address upper 32 HB */ +#define SDRAM_ERRADDLHB (SDRAMQ_DCR_BASE+0x9) /* error address lower 32 HB */ +#define SDRAM_PLBADDULL (SDRAMQ_DCR_BASE+0xA) /* PLB base address upper 32 LL */ +#define SDRAM_CONF1LL (SDRAMQ_DCR_BASE+0xB) /* configuration 1 LL */ +#define SDRAM_ERRSTATLL (SDRAMQ_DCR_BASE+0xC) /* error status LL */ +#define SDRAM_ERRADDULL (SDRAMQ_DCR_BASE+0xD) /* error address upper 32 LL */ +#define SDRAM_ERRADDLLL (SDRAMQ_DCR_BASE+0xE) /* error address lower 32 LL */ +#define SDRAM_CONFPATHB (SDRAMQ_DCR_BASE+0xF) /* configuration between paths */ +#define SDRAM_PLBADDUHB (SDRAMQ_DCR_BASE+0x10) /* PLB base address upper 32 LL */ + +/*-----------------------------------------------------------------------------+ +| Memory Bank 0-7 configuration ++-----------------------------------------------------------------------------*/ +#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */ +#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFFE00000)>>2) +#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFFE00000)<<2) +#define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */ +#define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<6) +#define SDRAM_RXBAS_SDSZ_DECODE(n) ((((unsigned long)(n))>>6)&0x3FF) +#define SDRAM_RXBAS_SDSZ_0 0x00000000 /* 0M */ +#define SDRAM_RXBAS_SDSZ_8 0x0000FFC0 /* 8M */ +#define SDRAM_RXBAS_SDSZ_16 0x0000FF80 /* 16M */ +#define SDRAM_RXBAS_SDSZ_32 0x0000FF00 /* 32M */ +#define SDRAM_RXBAS_SDSZ_64 0x0000FE00 /* 64M */ +#define SDRAM_RXBAS_SDSZ_128 0x0000FC00 /* 128M */ +#define SDRAM_RXBAS_SDSZ_256 0x0000F800 /* 256M */ +#define SDRAM_RXBAS_SDSZ_512 0x0000F000 /* 512M */ +#define SDRAM_RXBAS_SDSZ_1024 0x0000E000 /* 1024M */ +#define SDRAM_RXBAS_SDSZ_2048 0x0000C000 /* 2048M */ +#define SDRAM_RXBAS_SDSZ_4096 0x00008000 /* 4096M */ + +/*----------------------------------------------------------------------------+ +| Memory controller defines ++----------------------------------------------------------------------------*/ +#define SDRAMC_DCR_BASE 0x010 +#define SDRAMC_CFGADDR (SDRAMC_DCR_BASE+0x0) /* Memory configuration add */ +#define SDRAMC_CFGDATA (SDRAMC_DCR_BASE+0x1) /* Memory configuration data */ + +/* A REVOIR versus specs 4 bank - SG*/ +#define SDRAM_MCSTAT 0x14 /* memory controller status */ +#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */ +#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */ +#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */ +#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */ +#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */ +#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */ +#define SDRAM_CODT 0x26 /* on die termination for controller */ +#define SDRAM_VVPR 0x27 /* variable VRef programmming */ +#define SDRAM_OPARS 0x28 /* on chip driver control setup */ +#define SDRAM_OPART 0x29 /* on chip driver control trigger */ +#define SDRAM_RTR 0x30 /* refresh timer */ +#define SDRAM_PMIT 0x34 /* power management idle timer */ +#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */ +#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */ +#define SDRAM_MB2CF 0x48 +#define SDRAM_MB3CF 0x4C +#define SDRAM_INITPLR0 0x50 /* manual initialization control */ +#define SDRAM_INITPLR1 0x51 /* manual initialization control */ +#define SDRAM_INITPLR2 0x52 /* manual initialization control */ +#define SDRAM_INITPLR3 0x53 /* manual initialization control */ +#define SDRAM_INITPLR4 0x54 /* manual initialization control */ +#define SDRAM_INITPLR5 0x55 /* manual initialization control */ +#define SDRAM_INITPLR6 0x56 /* manual initialization control */ +#define SDRAM_INITPLR7 0x57 /* manual initialization control */ +#define SDRAM_INITPLR8 0x58 /* manual initialization control */ +#define SDRAM_INITPLR9 0x59 /* manual initialization control */ +#define SDRAM_INITPLR10 0x5a /* manual initialization control */ +#define SDRAM_INITPLR11 0x5b /* manual initialization control */ +#define SDRAM_INITPLR12 0x5c /* manual initialization control */ +#define SDRAM_INITPLR13 0x5d /* manual initialization control */ +#define SDRAM_INITPLR14 0x5e /* manual initialization control */ +#define SDRAM_INITPLR15 0x5f /* manual initialization control */ +#define SDRAM_RQDC 0x70 /* read DQS delay control */ +#define SDRAM_RFDC 0x74 /* read feedback delay control */ +#define SDRAM_RDCC 0x78 /* read data capture control */ +#define SDRAM_DLCR 0x7A /* delay line calibration */ +#define SDRAM_CLKTR 0x80 /* DDR clock timing */ +#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */ +#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */ +#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */ +#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */ +#define SDRAM_MMODE 0x88 /* memory mode */ +#define SDRAM_MEMODE 0x89 /* memory extended mode */ +#define SDRAM_ECCCR 0x98 /* ECC error status */ +#define SDRAM_CID 0xA4 /* core ID */ +#define SDRAM_RID 0xA8 /* revision ID */ + +/*-----------------------------------------------------------------------------+ +| Memory Controller Status ++-----------------------------------------------------------------------------*/ +#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */ +#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */ +#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */ +#define SDRAM_MCSTAT_SRMS_MASK 0x80000000 /* Mem self refresh stat mask */ +#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */ +#define SDRAM_MCSTAT_SRMS_SF 0x80000000 /* Mem in self refresh */ + +/*-----------------------------------------------------------------------------+ +| Memory Controller Options 1 ++-----------------------------------------------------------------------------*/ +#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask*/ +#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */ +#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */ +#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */ +#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/ +#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((unsigned long)(n))>>28)&0x3) +#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */ +#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */ +#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */ +#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */ +#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */ +#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */ +#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */ +#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */ +#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */ +#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */ +#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */ +#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */ +#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */ +#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */ +#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */ +#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */ +#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */ +#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */ +#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */ +#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */ +#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */ +#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */ +#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */ +#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */ +#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */ +#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */ +#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */ +#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */ +#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */ + +/*-----------------------------------------------------------------------------+ +| Memory Controller Options 2 ++-----------------------------------------------------------------------------*/ +#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */ +#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */ +#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */ +#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */ +#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */ +#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */ +#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */ +#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */ +#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */ +#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */ +#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */ +#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */ +#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */ +#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */ +#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */ +#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/ +#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */ +#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */ + +/*-----------------------------------------------------------------------------+ +| SDRAM Refresh Timer Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_RTR_RINT_MASK 0xFFF80000 +#define SDRAM_RTR_RINT_ENCODE(n) ((((unsigned long)(n))&0xFFF8)<<16) +#define SDRAM_RTR_RINT_DECODE(n) ((((unsigned long)(n))>>16)&0xFFF8) + +/*-----------------------------------------------------------------------------+ +| SDRAM Read DQS Delay Control Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_RQDC_RQDE_MASK 0x80000000 +#define SDRAM_RQDC_RQDE_DISABLE 0x00000000 +#define SDRAM_RQDC_RQDE_ENABLE 0x80000000 +#define SDRAM_RQDC_RQFD_MASK 0x000001FF +#define SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0) + +#define SDRAM_RQDC_RQFD_MAX 0x1FF + +/*-----------------------------------------------------------------------------+ +| SDRAM Read Data Capture Control Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_RDCC_RDSS_MASK 0xC0000000 +#define SDRAM_RDCC_RDSS_T1 0x00000000 +#define SDRAM_RDCC_RDSS_T2 0x40000000 +#define SDRAM_RDCC_RDSS_T3 0x80000000 +#define SDRAM_RDCC_RDSS_T4 0xC0000000 +#define SDRAM_RDCC_RSAE_MASK 0x00000001 +#define SDRAM_RDCC_RSAE_DISABLE 0x00000001 +#define SDRAM_RDCC_RSAE_ENABLE 0x00000000 + +/*-----------------------------------------------------------------------------+ +| SDRAM Read Feedback Delay Control Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_RFDC_ARSE_MASK 0x80000000 +#define SDRAM_RFDC_ARSE_DISABLE 0x80000000 +#define SDRAM_RFDC_ARSE_ENABLE 0x00000000 +#define SDRAM_RFDC_RFOS_MASK 0x007F0000 +#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define SDRAM_RFDC_RFFD_MASK 0x000003FF +#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) + +#define SDRAM_RFDC_RFFD_MAX 0x7FF + +/*-----------------------------------------------------------------------------+ +| SDRAM Delay Line Calibration Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_DLCR_DCLM_MASK 0x80000000 +#define SDRAM_DLCR_DCLM_MANUEL 0x80000000 +#define SDRAM_DLCR_DCLM_AUTO 0x00000000 +#define SDRAM_DLCR_DLCR_MASK 0x08000000 +#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000 +#define SDRAM_DLCR_DLCR_IDLE 0x00000000 +#define SDRAM_DLCR_DLCS_MASK 0x07000000 +#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000 +#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000 +#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000 +#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000 +#define SDRAM_DLCR_DLCS_ERROR 0x04000000 +#define SDRAM_DLCR_DLCV_MASK 0x000001FF +#define SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0) +#define SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF) + +/*-----------------------------------------------------------------------------+ +| SDRAM Controller On Die Termination Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_CODT_ODT_ON 0x80000000 +#define SDRAM_CODT_ODT_OFF 0x00000000 +#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK 0x00000020 +#define SDRAM_CODT_DQS_2_5_V_DDR1 0x00000000 +#define SDRAM_CODT_DQS_1_8_V_DDR2 0x00000020 +#define SDRAM_CODT_DQS_MASK 0x00000010 +#define SDRAM_CODT_DQS_DIFFERENTIAL 0x00000000 +#define SDRAM_CODT_DQS_SINGLE_END 0x00000010 +#define SDRAM_CODT_CKSE_DIFFERENTIAL 0x00000000 +#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008 +#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004 +#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002 +#define SDRAM_CODT_IO_HIZ 0x00000000 +#define SDRAM_CODT_IO_NMODE 0x00000001 + +/*-----------------------------------------------------------------------------+ +| SDRAM Mode Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_MMODE_WR_MASK 0x00000E00 +#define SDRAM_MMODE_WR_DDR1 0x00000000 +#define SDRAM_MMODE_WR_DDR2_3_CYC 0x00000400 +#define SDRAM_MMODE_WR_DDR2_4_CYC 0x00000600 +#define SDRAM_MMODE_WR_DDR2_5_CYC 0x00000800 +#define SDRAM_MMODE_WR_DDR2_6_CYC 0x00000A00 +#define SDRAM_MMODE_DCL_MASK 0x00000070 +#define SDRAM_MMODE_DCL_DDR1_2_0_CLK 0x00000020 +#define SDRAM_MMODE_DCL_DDR1_2_5_CLK 0x00000060 +#define SDRAM_MMODE_DCL_DDR1_3_0_CLK 0x00000030 +#define SDRAM_MMODE_DCL_DDR2_2_0_CLK 0x00000020 +#define SDRAM_MMODE_DCL_DDR2_3_0_CLK 0x00000030 +#define SDRAM_MMODE_DCL_DDR2_4_0_CLK 0x00000040 +#define SDRAM_MMODE_DCL_DDR2_5_0_CLK 0x00000050 +#define SDRAM_MMODE_DCL_DDR2_6_0_CLK 0x00000060 +#define SDRAM_MMODE_DCL_DDR2_7_0_CLK 0x00000070 + +/*-----------------------------------------------------------------------------+ +| SDRAM Extended Mode Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_MEMODE_DIC_MASK 0x00000002 +#define SDRAM_MEMODE_DIC_NORMAL 0x00000000 +#define SDRAM_MEMODE_DIC_WEAK 0x00000002 +#define SDRAM_MEMODE_DLL_MASK 0x00000001 +#define SDRAM_MEMODE_DLL_DISABLE 0x00000001 +#define SDRAM_MEMODE_DLL_ENABLE 0x00000000 +#define SDRAM_MEMODE_RTT_MASK 0x00000044 +#define SDRAM_MEMODE_RTT_DISABLED 0x00000000 +#define SDRAM_MEMODE_RTT_75OHM 0x00000004 +#define SDRAM_MEMODE_RTT_150OHM 0x00000040 +#define SDRAM_MEMODE_DQS_MASK 0x00000400 +#define SDRAM_MEMODE_DQS_DISABLE 0x00000400 +#define SDRAM_MEMODE_DQS_ENABLE 0x00000000 + +/*-----------------------------------------------------------------------------+ +| SDRAM Clock Timing Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_CLKTR_CLKP_MASK 0xC0000000 +#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000 +#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000 + +/*-----------------------------------------------------------------------------+ +| SDRAM Write Timing Register ++-----------------------------------------------------------------------------*/ +#define SDRAM_WRDTR_LLWP_MASK 0x10000000 +#define SDRAM_WRDTR_LLWP_DIS 0x10000000 +#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000 +#define SDRAM_WRDTR_WTR_MASK 0x0E000000 +#define SDRAM_WRDTR_WTR_0_DEG 0x06000000 +#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000 +#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000 + +/*-----------------------------------------------------------------------------+ +| SDRAM SDTR1 Options ++-----------------------------------------------------------------------------*/ +#define SDRAM_SDTR1_LDOF_MASK 0x80000000 +#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000 +#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000 +#define SDRAM_SDTR1_RTW_MASK 0x00F00000 +#define SDRAM_SDTR1_RTW_2_CLK 0x00200000 +#define SDRAM_SDTR1_RTW_3_CLK 0x00300000 +#define SDRAM_SDTR1_WTWO_MASK 0x000F0000 +#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000 +#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000 +#define SDRAM_SDTR1_RTRO_MASK 0x0000F000 +#define SDRAM_SDTR1_RTRO_1_CLK 0x00001000 +#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000 + +/*-----------------------------------------------------------------------------+ +| SDRAM SDTR2 Options ++-----------------------------------------------------------------------------*/ +#define SDRAM_SDTR2_RCD_MASK 0xF0000000 +#define SDRAM_SDTR2_RCD_1_CLK 0x10000000 +#define SDRAM_SDTR2_RCD_2_CLK 0x20000000 +#define SDRAM_SDTR2_RCD_3_CLK 0x30000000 +#define SDRAM_SDTR2_RCD_4_CLK 0x40000000 +#define SDRAM_SDTR2_RCD_5_CLK 0x50000000 +#define SDRAM_SDTR2_WTR_MASK 0x0F000000 +#define SDRAM_SDTR2_WTR_1_CLK 0x01000000 +#define SDRAM_SDTR2_WTR_2_CLK 0x02000000 +#define SDRAM_SDTR2_WTR_3_CLK 0x03000000 +#define SDRAM_SDTR2_WTR_4_CLK 0x04000000 +#define SDRAM_SDTR3_WTR_ENCODE(n) ((((unsigned long)(n))&0xF)<<24) +#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000 +#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000 +#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000 +#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000 +#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000 +#define SDRAM_SDTR2_WPC_MASK 0x0000F000 +#define SDRAM_SDTR2_WPC_2_CLK 0x00002000 +#define SDRAM_SDTR2_WPC_3_CLK 0x00003000 +#define SDRAM_SDTR2_WPC_4_CLK 0x00004000 +#define SDRAM_SDTR2_WPC_5_CLK 0x00005000 +#define SDRAM_SDTR2_WPC_6_CLK 0x00006000 +#define SDRAM_SDTR3_WPC_ENCODE(n) ((((unsigned long)(n))&0xF)<<12) +#define SDRAM_SDTR2_RPC_MASK 0x00000F00 +#define SDRAM_SDTR2_RPC_2_CLK 0x00000200 +#define SDRAM_SDTR2_RPC_3_CLK 0x00000300 +#define SDRAM_SDTR2_RPC_4_CLK 0x00000400 +#define SDRAM_SDTR2_RP_MASK 0x000000F0 +#define SDRAM_SDTR2_RP_3_CLK 0x00000030 +#define SDRAM_SDTR2_RP_4_CLK 0x00000040 +#define SDRAM_SDTR2_RP_5_CLK 0x00000050 +#define SDRAM_SDTR2_RP_6_CLK 0x00000060 +#define SDRAM_SDTR2_RP_7_CLK 0x00000070 +#define SDRAM_SDTR2_RRD_MASK 0x0000000F +#define SDRAM_SDTR2_RRD_2_CLK 0x00000002 +#define SDRAM_SDTR2_RRD_3_CLK 0x00000003 + +/*-----------------------------------------------------------------------------+ +| SDRAM SDTR3 Options ++-----------------------------------------------------------------------------*/ +#define SDRAM_SDTR3_RAS_MASK 0x1F000000 +#define SDRAM_SDTR3_RAS_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define SDRAM_SDTR3_RC_MASK 0x001F0000 +#define SDRAM_SDTR3_RC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define SDRAM_SDTR3_XCS_MASK 0x00001F00 +#define SDRAM_SDTR3_XCS 0x00000D00 +#define SDRAM_SDTR3_RFC_MASK 0x0000003F +#define SDRAM_SDTR3_RFC_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0) + +/*-----------------------------------------------------------------------------+ +| Memory Bank 0-1 configuration ++-----------------------------------------------------------------------------*/ +#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */ +#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */ +#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */ +#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */ +#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */ +#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */ +#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */ +#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */ +#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */ +#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */ +#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */ +#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */ +#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */ +#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */ +#endif /* CONFIG_440SPE */ + /*----------------------------------------------------------------------------- | External Bus Controller +----------------------------------------------------------------------------*/ @@ -503,7 +1050,7 @@ /*----------------------------------------------------------------------------- | L2 Cache +----------------------------------------------------------------------------*/ -#if defined (CONFIG_440GX) || defined(CONFIG_440SP) +#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define L2_CACHE_BASE 0x030 #define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */ #define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */ @@ -526,7 +1073,7 @@ | Clocking, Power Management and Chip Control +----------------------------------------------------------------------------*/ #define CNTRL_DCR_BASE 0x0b0 -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) #define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */ #define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */ #define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */ @@ -574,6 +1121,30 @@ #define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */ #define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */ +#if defined(CONFIG_440SPE) +#define UIC2_DCR_BASE 0xe0 +#define uic2sr (UIC0_DCR_BASE+0x0) /* UIC2 status-Read Clear */ +#define uic2srs (UIC0_DCR_BASE+0x1) /* UIC2 status-Read Set */ +#define uic2er (UIC0_DCR_BASE+0x2) /* UIC2 enable */ +#define uic2cr (UIC0_DCR_BASE+0x3) /* UIC2 critical */ +#define uic2pr (UIC0_DCR_BASE+0x4) /* UIC2 polarity */ +#define uic2tr (UIC0_DCR_BASE+0x5) /* UIC2 triggering */ +#define uic2msr (UIC0_DCR_BASE+0x6) /* UIC2 masked status */ +#define uic2vr (UIC0_DCR_BASE+0x7) /* UIC2 vector */ +#define uic2vcr (UIC0_DCR_BASE+0x8) /* UIC2 vector configuration */ + +#define UIC3_DCR_BASE 0xf0 +#define uic3sr (UIC1_DCR_BASE+0x0) /* UIC3 status-Read Clear */ +#define uic3srs (UIC0_DCR_BASE+0x1) /* UIC3 status-Read Set */ +#define uic3er (UIC1_DCR_BASE+0x2) /* UIC3 enable */ +#define uic3cr (UIC1_DCR_BASE+0x3) /* UIC3 critical */ +#define uic3pr (UIC1_DCR_BASE+0x4) /* UIC3 polarity */ +#define uic3tr (UIC1_DCR_BASE+0x5) /* UIC3 triggering */ +#define uic3msr (UIC1_DCR_BASE+0x6) /* UIC3 masked status */ +#define uic3vr (UIC1_DCR_BASE+0x7) /* UIC3 vector */ +#define uic3vcr (UIC1_DCR_BASE+0x8) /* UIC3 vector configuration */ +#endif /* CONFIG_440SPE */ + #if defined(CONFIG_440GX) #define UIC2_DCR_BASE 0x210 #define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */ @@ -607,6 +1178,103 @@ #define uicvr uic0vr #define uicvcr uic0vcr +#if defined(CONFIG_440SPE) +/*----------------------------------------------------------------------------+ +| Clock / Power-on-reset DCR's. ++----------------------------------------------------------------------------*/ +#define CPR0_CFGADDR 0x00C +#define CPR0_CFGDATA 0x00D + +#define CPR0_CLKUPD 0x20 +#define CPR0_CLKUPD_BSY_MASK 0x80000000 +#define CPR0_CLKUPD_BSY_COMPLETED 0x00000000 +#define CPR0_CLKUPD_BSY_BUSY 0x80000000 +#define CPR0_CLKUPD_CUI_MASK 0x80000000 +#define CPR0_CLKUPD_CUI_DISABLE 0x00000000 +#define CPR0_CLKUPD_CUI_ENABLE 0x80000000 +#define CPR0_CLKUPD_CUD_MASK 0x40000000 +#define CPR0_CLKUPD_CUD_DISABLE 0x00000000 +#define CPR0_CLKUPD_CUD_ENABLE 0x40000000 + +#define CPR0_PLLC 0x40 +#define CPR0_PLLC_RST_MASK 0x80000000 +#define CPR0_PLLC_RST_PLLLOCKED 0x00000000 +#define CPR0_PLLC_RST_PLLRESET 0x80000000 +#define CPR0_PLLC_ENG_MASK 0x40000000 +#define CPR0_PLLC_ENG_DISABLE 0x00000000 +#define CPR0_PLLC_ENG_ENABLE 0x40000000 +#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30) +#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01) +#define CPR0_PLLC_SRC_MASK 0x20000000 +#define CPR0_PLLC_SRC_PLLOUTA 0x00000000 +#define CPR0_PLLC_SRC_PLLOUTB 0x20000000 +#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29) +#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01) +#define CPR0_PLLC_SEL_MASK 0x07000000 +#define CPR0_PLLC_SEL_PLLOUT 0x00000000 +#define CPR0_PLLC_SEL_CPU 0x01000000 +#define CPR0_PLLC_SEL_EBC 0x05000000 +#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07) +#define CPR0_PLLC_TUNE_MASK 0x000003FF +#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) + +#define CPR0_PLLD 0x60 +#define CPR0_PLLD_FBDV_MASK 0x1F000000 +#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1) +#define CPR0_PLLD_FWDVA_MASK 0x000F0000 +#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16) +#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1) +#define CPR0_PLLD_FWDVB_MASK 0x00000700 +#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8) +#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1) +#define CPR0_PLLD_LFBDV_MASK 0x0000003F +#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0) +#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1) + +#define CPR0_PRIMAD 0x80 +#define CPR0_PRIMAD_PRADV0_MASK 0x07000000 +#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1) + +#define CPR0_PRIMBD 0xA0 +#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000 +#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24) +#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1) + +#define CPR0_OPBD 0xC0 +#define CPR0_OPBD_OPBDV0_MASK 0x03000000 +#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) + +#define CPR0_PERD 0xE0 +#define CPR0_PERD_PERDV0_MASK 0x03000000 +#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) + +#define CPR0_MALD 0x100 +#define CPR0_MALD_MALDV0_MASK 0x03000000 +#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1) + +#define CPR0_ICFG 0x140 +#define CPR0_ICFG_RLI_MASK 0x80000000 +#define CPR0_ICFG_RLI_RESETCPR 0x00000000 +#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000 +#define CPR0_ICFG_ICS_MASK 0x00000007 +#define CPR0_ICFG_ICS_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0) +#define CPR0_ICFG_ICS_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1) + +/************************/ +/* IIC defines */ +/************************/ +#define IIC0_MMIO_BASE 0xA0000400 +#define IIC1_MMIO_BASE 0xA0000500 + +#endif /* CONFIG_440SP */ + /*----------------------------------------------------------------------------- | DMA +----------------------------------------------------------------------------*/ @@ -722,7 +1390,7 @@ #define UIC_GPTCT 0x00000004 /* GPT count timer */ #define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ #define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ -#else /* CONFIG_440SP */ +#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) #define UIC_U0 0x80000000 /* UART 0 */ #define UIC_U1 0x40000000 /* UART 1 */ #define UIC_IIC0 0x20000000 /* IIC */ @@ -755,7 +1423,40 @@ #define UIC_EIR6 0x00000004 /* External interrupt 6 */ #define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ #define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ -#endif /* CONFIG_440SP */ +#elif !defined(CONFIG_440SPE) +#define UIC_U0 0x80000000 /* UART 0 */ +#define UIC_U1 0x40000000 /* UART 1 */ +#define UIC_IIC0 0x20000000 /* IIC */ +#define UIC_IIC1 0x10000000 /* IIC */ +#define UIC_PIM 0x08000000 /* PCI inbound message */ +#define UIC_PCRW 0x04000000 /* PCI command register write */ +#define UIC_PPM 0x02000000 /* PCI power management */ +#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */ +#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */ +#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */ +#define UIC_MTE 0x00200000 /* MAL TXEOB */ +#define UIC_MRE 0x00100000 /* MAL RXEOB */ +#define UIC_D0 0x00080000 /* DMA channel 0 */ +#define UIC_D1 0x00040000 /* DMA channel 1 */ +#define UIC_D2 0x00020000 /* DMA channel 2 */ +#define UIC_D3 0x00010000 /* DMA channel 3 */ +#define UIC_RSVD0 0x00008000 /* Reserved */ +#define UIC_RSVD1 0x00004000 /* Reserved */ +#define UIC_CT0 0x00002000 /* GPT compare timer 0 */ +#define UIC_CT1 0x00001000 /* GPT compare timer 1 */ +#define UIC_CT2 0x00000800 /* GPT compare timer 2 */ +#define UIC_CT3 0x00000400 /* GPT compare timer 3 */ +#define UIC_CT4 0x00000200 /* GPT compare timer 4 */ +#define UIC_EIR0 0x00000100 /* External interrupt 0 */ +#define UIC_EIR1 0x00000080 /* External interrupt 1 */ +#define UIC_EIR2 0x00000040 /* External interrupt 2 */ +#define UIC_EIR3 0x00000020 /* External interrupt 3 */ +#define UIC_EIR4 0x00000010 /* External interrupt 4 */ +#define UIC_EIR5 0x00000008 /* External interrupt 5 */ +#define UIC_EIR6 0x00000004 /* External interrupt 6 */ +#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ +#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ +#endif /* CONFIG_440GX */ /* For compatibility with 405 code */ #define UIC_MAL_TXEOB UIC_MTE @@ -797,7 +1498,40 @@ #define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ #define UIC_ETH1 0x00000002 /* Reserved */ #define UIC_XOR 0x00000001 /* XOR */ -#else /* CONFIG_440SP */ +#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) +#define UIC_MS 0x80000000 /* MAL SERR */ +#define UIC_MTDE 0x40000000 /* MAL TXDE */ +#define UIC_MRDE 0x20000000 /* MAL RXDE */ +#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/ +#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */ +#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ +#define UIC_EBMI 0x02000000 /* EBMI interrupt status */ +#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */ +#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */ +#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */ +#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */ +#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */ +#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */ +#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */ +#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */ +#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */ +#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */ +#define UIC_PPMI 0x00004000 /* PPM interrupt status */ +#define UIC_EIR7 0x00002000 /* External interrupt 7 */ +#define UIC_EIR8 0x00001000 /* External interrupt 8 */ +#define UIC_EIR9 0x00000800 /* External interrupt 9 */ +#define UIC_EIR10 0x00000400 /* External interrupt 10 */ +#define UIC_EIR11 0x00000200 /* External interrupt 11 */ +#define UIC_EIR12 0x00000100 /* External interrupt 12 */ +#define UIC_SRE 0x00000080 /* Serial ROM error */ +#define UIC_RSVD2 0x00000040 /* Reserved */ +#define UIC_RSVD3 0x00000020 /* Reserved */ +#define UIC_PAE 0x00000010 /* PCI asynchronous error */ +#define UIC_ETH0 0x00000008 /* Ethernet 0 */ +#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ +#define UIC_ETH1 0x00000002 /* Ethernet 1 */ +#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */ +#elif !defined(CONFIG_440SPE) #define UIC_MS 0x80000000 /* MAL SERR */ #define UIC_MTDE 0x40000000 /* MAL TXDE */ #define UIC_MRDE 0x20000000 /* MAL RXDE */ @@ -890,6 +1624,117 @@ #define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \ UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI) #endif /* CONFIG_440GX */ +/*---------------------------------------------------------------------------+ +| Universal interrupt controller interrupts ++---------------------------------------------------------------------------*/ +#if defined(CONFIG_440SPE) +/*#define UICB0_UIC0CI 0x80000000*/ /* UIC0 Critical Interrupt */ +/*#define UICB0_UIC0NCI 0x40000000*/ /* UIC0 Noncritical Interrupt */ +#define UICB0_UIC1CI 0x00000002 /* UIC1 Critical Interrupt */ +#define UICB0_UIC1NCI 0x00000001 /* UIC1 Noncritical Interrupt */ +#define UICB0_UIC2CI 0x00200000 /* UIC2 Critical Interrupt */ +#define UICB0_UIC2NCI 0x00100000 /* UIC2 Noncritical Interrupt */ +#define UICB0_UIC3CI 0x00008000 /* UIC3 Critical Interrupt */ +#define UICB0_UIC3NCI 0x00004000 /* UIC3 Noncritical Interrupt */ + +#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \ + UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI) +/*---------------------------------------------------------------------------+ +| Universal interrupt controller 0 interrupts (UIC0) ++---------------------------------------------------------------------------*/ +#define UIC_U0 0x80000000 /* UART 0 */ +#define UIC_U1 0x40000000 /* UART 1 */ +#define UIC_IIC0 0x20000000 /* IIC */ +#define UIC_IIC1 0x10000000 /* IIC */ +#define UIC_PIM 0x08000000 /* PCI inbound message */ +#define UIC_PCRW 0x04000000 /* PCI command register write */ +#define UIC_PPM 0x02000000 /* PCI power management */ +#define UIC_PVPDA 0x01000000 /* PCIx 0 vpd access */ +#define UIC_MSI0 0x00800000 /* PCIx MSI level 0 */ +#define UIC_EIR15 0x00400000 /* External intp 15 */ +#define UIC_PEMSI0 0x00080000 /* PCIe MSI level 0 */ +#define UIC_PEMSI1 0x00040000 /* PCIe MSI level 1 */ +#define UIC_PEMSI2 0x00020000 /* PCIe MSI level 2 */ +#define UIC_PEMSI3 0x00010000 /* PCIe MSI level 3 */ +#define UIC_EIR14 0x00002000 /* External interrupt 14 */ +#define UIC_D0CPFF 0x00001000 /* DMA0 cp fifo full */ +#define UIC_D0CSNS 0x00000800 /* DMA0 cs fifo needs service */ +#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */ +#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */ +#define UIC_I2OID 0x00000100 /* I2O inbound door bell */ +#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */ +#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */ +#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */ +#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */ +#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */ +#define UIC_CPTCNT 0x00000004 /* GPT Count Timer */ +/*---------------------------------------------------------------------------+ +| Universal interrupt controller 1 interrupts (UIC1) ++---------------------------------------------------------------------------*/ +#define UIC_EIR13 0x80000000 /* externei intp 13 */ +#define UIC_MS 0x40000000 /* MAL SERR */ +#define UIC_MTDE 0x20000000 /* MAL TXDE */ +#define UIC_MRDE 0x10000000 /* MAL RXDE */ +#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */ +#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ +#define UIC_MTE 0x02000000 /* MAL TXEOB */ +#define UIC_MRE 0x01000000 /* MAL RXEOB */ +#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */ +#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */ +#define UIC_MSI3 0x00200000 /* PCI MSI level 3 */ +#define UIC_L2C 0x00100000 /* L2 cache */ +#define UIC_CT0 0x00080000 /* GPT compare timer 0 */ +#define UIC_CT1 0x00040000 /* GPT compare timer 1 */ +#define UIC_CT2 0x00020000 /* GPT compare timer 2 */ +#define UIC_CT3 0x00010000 /* GPT compare timer 3 */ +#define UIC_CT4 0x00008000 /* GPT compare timer 4 */ +#define UIC_EIR12 0x00004000 /* External interrupt 12 */ +#define UIC_EIR11 0x00002000 /* External interrupt 11 */ +#define UIC_EIR10 0x00001000 /* External interrupt 10 */ +#define UIC_EIR9 0x00000800 /* External interrupt 9 */ +#define UIC_EIR8 0x00000400 /* External interrupt 8 */ +#define UIC_DMAE 0x00000200 /* dma error */ +#define UIC_I2OE 0x00000100 /* i2o error */ +#define UIC_SRE 0x00000080 /* Serial ROM error */ +#define UIC_PCIXAE 0x00000040 /* Pcix0 async error */ +#define UIC_EIR7 0x00000020 /* External interrupt 7 */ +#define UIC_EIR6 0x00000010 /* External interrupt 6 */ +#define UIC_ETH0 0x00000008 /* Ethernet 0 */ +#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ +#define UIC_ETH1 0x00000002 /* reserved */ +#define UIC_XOR 0x00000001 /* xor */ + +/*---------------------------------------------------------------------------+ +| Universal interrupt controller 2 interrupts (UIC2) ++---------------------------------------------------------------------------*/ +#define UIC_PEOAL 0x80000000 /* PE0 AL */ +#define UIC_PEOVA 0x40000000 /* PE0 VPD access */ +#define UIC_PEOHRR 0x20000000 /* PE0 Host reset request rising */ +#define UIC_PE0HRF 0x10000000 /* PE0 Host reset request falling */ +#define UIC_PE0TCR 0x08000000 /* PE0 TCR */ +#define UIC_PE0BVCO 0x04000000 /* PE0 Busmaster VCO */ +#define UIC_PE0DCRE 0x02000000 /* PE0 DCR error */ +#define UIC_PE1AL 0x00800000 /* PE1 AL */ +#define UIC_PE1VA 0x00400000 /* PE1 VPD access */ +#define UIC_PE1HRR 0x00200000 /* PE1 Host reset request rising */ +#define UIC_PE1HRF 0x00100000 /* PE1 Host reset request falling */ +#define UIC_PE1TCR 0x00080000 /* PE1 TCR */ +#define UIC_PE1BVCO 0x00040000 /* PE1 Busmaster VCO */ +#define UIC_PE1DCRE 0x00020000 /* PE1 DCR error */ +#define UIC_PE2AL 0x00008000 /* PE2 AL */ +#define UIC_PE2VA 0x00004000 /* PE2 VPD access */ +#define UIC_PE2HRR 0x00002000 /* PE2 Host reset request rising */ +#define UIC_PE2HRF 0x00001000 /* PE2 Host reset request falling */ +#define UIC_PE2TCR 0x00000800 /* PE2 TCR */ +#define UIC_PE2BVCO 0x00000400 /* PE2 Busmaster VCO */ +#define UIC_PE2DCRE 0x00000200 /* PE2 DCR error */ +#define UIC_EIR5 0x00000080 /* External interrupt 5 */ +#define UIC_EIR4 0x00000040 /* External interrupt 4 */ +#define UIC_EIR3 0x00000020 /* External interrupt 3 */ +#define UIC_EIR2 0x00000010 /* External interrupt 2 */ +#define UIC_EIR1 0x00000008 /* External interrupt 1 */ +#define UIC_EIR0 0x00000004 /* External interrupt 0 */ +#endif /* CONFIG_440SPE */ /*-----------------------------------------------------------------------------+ | External Bus Controller Bit Settings @@ -981,6 +1826,432 @@ /*-----------------------------------------------------------------------------+ | SDR0 Bit Settings +-----------------------------------------------------------------------------*/ +#if defined(CONFIG_440SPE) +#define SDR0_CP440 0x0180 +#define SDR0_CP440_ERPN_MASK 0x30000000 +#define SDR0_CP440_ERPN_MASK_HI 0x3000 +#define SDR0_CP440_ERPN_MASK_LO 0x0000 +#define SDR0_CP440_ERPN_EBC 0x10000000 +#define SDR0_CP440_ERPN_EBC_HI 0x1000 +#define SDR0_CP440_ERPN_EBC_LO 0x0000 +#define SDR0_CP440_ERPN_PCI 0x20000000 +#define SDR0_CP440_ERPN_PCI_HI 0x2000 +#define SDR0_CP440_ERPN_PCI_LO 0x0000 +#define SDR0_CP440_ERPN_ENCODE(n) ((((unsigned long)(n))&0x03)<<28) +#define SDR0_CP440_ERPN_DECODE(n) ((((unsigned long)(n))>>28)&0x03) +#define SDR0_CP440_NTO1_MASK 0x00000002 +#define SDR0_CP440_NTO1_NTOP 0x00000000 +#define SDR0_CP440_NTO1_NTO1 0x00000002 +#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1) +#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01) +#define SDR0_CFGADDR 0x00E /*already defined line 277 */ +#define SDR0_CFGDATA 0x00F + + +#define SDR0_SDSTP0 0x0020 +#define SDR0_SDSTP0_ENG_MASK 0x80000000 +#define SDR0_SDSTP0_ENG_PLLDIS 0x00000000 +#define SDR0_SDSTP0_ENG_PLLENAB 0x80000000 +#define SDR0_SDSTP0_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<31) +#define SDR0_SDSTP0_ENG_DECODE(n) ((((unsigned long)(n))>>31)&0x01) +#define SDR0_SDSTP0_SRC_MASK 0x40000000 +#define SDR0_SDSTP0_SRC_PLLOUTA 0x00000000 +#define SDR0_SDSTP0_SRC_PLLOUTB 0x40000000 +#define SDR0_SDSTP0_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<30) +#define SDR0_SDSTP0_SRC_DECODE(n) ((((unsigned long)(n))>>30)&0x01) +#define SDR0_SDSTP0_SEL_MASK 0x38000000 +#define SDR0_SDSTP0_SEL_PLLOUT 0x00000000 +#define SDR0_SDSTP0_SEL_CPU 0x08000000 +#define SDR0_SDSTP0_SEL_EBC 0x28000000 +#define SDR0_SDSTP0_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<27) +#define SDR0_SDSTP0_SEL_DECODE(n) ((((unsigned long)(n))>>27)&0x07) +#define SDR0_SDSTP0_TUNE_MASK 0x07FE0000 +#define SDR0_SDSTP0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<17) +#define SDR0_SDSTP0_TUNE_DECODE(n) ((((unsigned long)(n))>>17)&0x3FF) +#define SDR0_SDSTP0_FBDV_MASK 0x0001F000 +#define SDR0_SDSTP0_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12) +#define SDR0_SDSTP0_FBDV_DECODE(n) ((((((unsigned long)(n))>>12)-1)&0x1F)+1) +#define SDR0_SDSTP0_FWDVA_MASK 0x00000F00 +#define SDR0_SDSTP0_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<8) +#define SDR0_SDSTP0_FWDVA_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x0F)+1) +#define SDR0_SDSTP0_FWDVB_MASK 0x000000E0 +#define SDR0_SDSTP0_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<5) +#define SDR0_SDSTP0_FWDVB_DECODE(n) ((((((unsigned long)(n))>>5)-1)&0x07)+1) +#define SDR0_SDSTP0_PRBDV0_MASK 0x0000001C +#define SDR0_SDSTP0_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<2) +#define SDR0_SDSTP0_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>2)-1)&0x07)+1) +#define SDR0_SDSTP0_OPBDV0_MASK 0x00000003 +#define SDR0_SDSTP0_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<0) +#define SDR0_SDSTP0_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x03)+1) + + +#define SDR0_SDSTP1 0x0021 +#define SDR0_SDSTP1_LFBDV_MASK 0xFC000000 +#define SDR0_SDSTP1_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<26) +#define SDR0_SDSTP1_LFBDV_DECODE(n) ((((unsigned long)(n))>>26)&0x3F) +#define SDR0_SDSTP1_PERDV0_MASK 0x03000000 +#define SDR0_SDSTP1_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24) +#define SDR0_SDSTP1_PERDV0_DECODE(n) ((((unsigned long)(n))>>24)&0x03) +#define SDR0_SDSTP1_MALDV0_MASK 0x00C00000 +#define SDR0_SDSTP1_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<22) +#define SDR0_SDSTP1_MALDV0_DECODE(n) ((((unsigned long)(n))>>22)&0x03) +#define SDR0_SDSTP1_DDR_MODE_MASK 0x00300000 +#define SDR0_SDSTP1_DDR1_MODE 0x00100000 +#define SDR0_SDSTP1_DDR2_MODE 0x00200000 +#define SDR0_SDSTP1_DDR_ENCODE(n) ((((unsigned long)(n))&0x03)<<20) +#define SDR0_SDSTP1_DDR_DECODE(n) ((((unsigned long)(n))>>20)&0x03) +#define SDR0_SDSTP1_ERPN_MASK 0x00080000 +#define SDR0_SDSTP1_ERPN_EBC 0x00000000 +#define SDR0_SDSTP1_ERPN_PCI 0x00080000 +#define SDR0_SDSTP1_PAE_MASK 0x00040000 +#define SDR0_SDSTP1_PAE_DISABLE 0x00000000 +#define SDR0_SDSTP1_PAE_ENABLE 0x00040000 +#define SDR0_SDSTP1_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<18) +#define SDR0_SDSTP1_PAE_DECODE(n) ((((unsigned long)(n))>>18)&0x01) +#define SDR0_SDSTP1_PHCE_MASK 0x00020000 +#define SDR0_SDSTP1_PHCE_DISABLE 0x00000000 +#define SDR0_SDSTP1_PHCE_ENABLE 0x00020000 +#define SDR0_SDSTP1_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<17) +#define SDR0_SDSTP1_PHCE_DECODE(n) ((((unsigned long)(n))>>17)&0x01) +#define SDR0_SDSTP1_PISE_MASK 0x00010000 +#define SDR0_SDSTP1_PISE_DISABLE 0x00000000 +#define SDR0_SDSTP1_PISE_ENABLE 0x00001000 +#define SDR0_SDSTP1_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<16) +#define SDR0_SDSTP1_PISE_DECODE(n) ((((unsigned long)(n))>>16)&0x01) +#define SDR0_SDSTP1_PCWE_MASK 0x00008000 +#define SDR0_SDSTP1_PCWE_DISABLE 0x00000000 +#define SDR0_SDSTP1_PCWE_ENABLE 0x00008000 +#define SDR0_SDSTP1_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<15) +#define SDR0_SDSTP1_PCWE_DECODE(n) ((((unsigned long)(n))>>15)&0x01) +#define SDR0_SDSTP1_PPIM_MASK 0x00007800 +#define SDR0_SDSTP1_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<11) +#define SDR0_SDSTP1_PPIM_DECODE(n) ((((unsigned long)(n))>>11)&0x0F) +#define SDR0_SDSTP1_PR64E_MASK 0x00000400 +#define SDR0_SDSTP1_PR64E_DISABLE 0x00000000 +#define SDR0_SDSTP1_PR64E_ENABLE 0x00000400 +#define SDR0_SDSTP1_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<10) +#define SDR0_SDSTP1_PR64E_DECODE(n) ((((unsigned long)(n))>>10)&0x01) +#define SDR0_SDSTP1_PXFS_MASK 0x00000300 +#define SDR0_SDSTP1_PXFS_100_133 0x00000000 +#define SDR0_SDSTP1_PXFS_66_100 0x00000100 +#define SDR0_SDSTP1_PXFS_50_66 0x00000200 +#define SDR0_SDSTP1_PXFS_0_50 0x00000300 +#define SDR0_SDSTP1_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<8) +#define SDR0_SDSTP1_PXFS_DECODE(n) ((((unsigned long)(n))>>8)&0x03) +#define SDR0_SDSTP1_EBCW_MASK 0x00000080 /* SOP */ +#define SDR0_SDSTP1_EBCW_8_BITS 0x00000000 /* SOP */ +#define SDR0_SDSTP1_EBCW_16_BITS 0x00000080 /* SOP */ +#define SDR0_SDSTP1_DBGEN_MASK 0x00000030 /* $218C */ +#define SDR0_SDSTP1_DBGEN_FUNC 0x00000000 +#define SDR0_SDSTP1_DBGEN_TRACE 0x00000010 +#define SDR0_SDSTP1_DBGEN_ENCODE(n) ((((unsigned long)(n))&0x03)<<4) /* $218C */ +#define SDR0_SDSTP1_DBGEN_DECODE(n) ((((unsigned long)(n))>>4)&0x03) /* $218C */ +#define SDR0_SDSTP1_ETH_MASK 0x00000004 +#define SDR0_SDSTP1_ETH_10_100 0x00000000 +#define SDR0_SDSTP1_ETH_GIGA 0x00000004 +#define SDR0_SDSTP1_ETH_ENCODE(n) ((((unsigned long)(n))&0x01)<<2) +#define SDR0_SDSTP1_ETH_DECODE(n) ((((unsigned long)(n))>>2)&0x01) +#define SDR0_SDSTP1_NTO1_MASK 0x00000001 +#define SDR0_SDSTP1_NTO1_DISABLE 0x00000000 +#define SDR0_SDSTP1_NTO1_ENABLE 0x00000001 +#define SDR0_SDSTP1_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<0) +#define SDR0_SDSTP1_NTO1_DECODE(n) ((((unsigned long)(n))>>0)&0x01) + +#define SDR0_SDSTP2 0x0022 +#define SDR0_SDSTP2_P1AE_MASK 0x80000000 +#define SDR0_SDSTP2_P1AE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P1AE_ENABLE 0x80000000 +#define SDR0_SDSTP2_P1AE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31) +#define SDR0_SDSTP2_P1AE_DECODE(n) ((((unsigned long)(n))>>31)&0x01) +#define SDR0_SDSTP2_P1HCE_MASK 0x40000000 +#define SDR0_SDSTP2_P1HCE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P1HCE_ENABLE 0x40000000 +#define SDR0_SDSTP2_P1HCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30) +#define SDR0_SDSTP2_P1HCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01) +#define SDR0_SDSTP2_P1ISE_MASK 0x20000000 +#define SDR0_SDSTP2_P1ISE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P1ISE_ENABLE 0x20000000 +#define SDR0_SDSTP2_P1ISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29) +#define SDR0_SDSTP2_P1ISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01) +#define SDR0_SDSTP2_P1CWE_MASK 0x10000000 +#define SDR0_SDSTP2_P1CWE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P1CWE_ENABLE 0x10000000 +#define SDR0_SDSTP2_P1CWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28) +#define SDR0_SDSTP2_P1CWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01) +#define SDR0_SDSTP2_P1PIM_MASK 0x0F000000 +#define SDR0_SDSTP2_P1PIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24) +#define SDR0_SDSTP2_P1PIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F) +#define SDR0_SDSTP2_P1R64E_MASK 0x00800000 +#define SDR0_SDSTP2_P1R64E_DISABLE 0x00000000 +#define SDR0_SDSTP2_P1R64E_ENABLE 0x00800000 +#define SDR0_SDSTP2_P1R64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23) +#define SDR0_SDSTP2_P1R64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01) +#define SDR0_SDSTP2_P1XFS_MASK 0x00600000 +#define SDR0_SDSTP2_P1XFS_100_133 0x00000000 +#define SDR0_SDSTP2_P1XFS_66_100 0x00200000 +#define SDR0_SDSTP2_P1XFS_50_66 0x00400000 +#define SDR0_SDSTP2_P1XFS_0_50 0x00600000 +#define SDR0_SDSTP2_P1XFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21) +#define SDR0_SDSTP2_P1XFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03) +#define SDR0_SDSTP2_P2AE_MASK 0x00040000 +#define SDR0_SDSTP2_P2AE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P2AE_ENABLE 0x00040000 +#define SDR0_SDSTP2_P2AE_ENCODE(n) ((((unsigned long)(n))&0x01)<<18) +#define SDR0_SDSTP2_P2AE_DECODE(n) ((((unsigned long)(n))>>18)&0x01) +#define SDR0_SDSTP2_P2HCE_MASK 0x00020000 +#define SDR0_SDSTP2_P2HCE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P2HCE_ENABLE 0x00020000 +#define SDR0_SDSTP2_P2HCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<17) +#define SDR0_SDSTP2_P2HCE_DECODE(n) ((((unsigned long)(n))>>17)&0x01) +#define SDR0_SDSTP2_P2ISE_MASK 0x00010000 +#define SDR0_SDSTP2_P2ISE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P2ISE_ENABLE 0x00010000 +#define SDR0_SDSTP2_P2ISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<16) +#define SDR0_SDSTP2_P2ISE_DECODE(n) ((((unsigned long)(n))>>16)&0x01) +#define SDR0_SDSTP2_P2CWE_MASK 0x00008000 +#define SDR0_SDSTP2_P2CWE_DISABLE 0x00000000 +#define SDR0_SDSTP2_P2CWE_ENABLE 0x00008000 +#define SDR0_SDSTP2_P2CWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<15) +#define SDR0_SDSTP2_P2CWE_DECODE(n) ((((unsigned long)(n))>>15)&0x01) +#define SDR0_SDSTP2_P2PIM_MASK 0x00007800 +#define SDR0_SDSTP2_P2PIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<11) +#define SDR0_SDSTP2_P2PIM_DECODE(n) ((((unsigned long)(n))>>11)&0x0F) +#define SDR0_SDSTP2_P2XFS_MASK 0x00000300 +#define SDR0_SDSTP2_P2XFS_100_133 0x00000000 +#define SDR0_SDSTP2_P2XFS_66_100 0x00000100 +#define SDR0_SDSTP2_P2XFS_50_66 0x00000200 +#define SDR0_SDSTP2_P2XFS_0_50 0x00000100 +#define SDR0_SDSTP2_P2XFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<8) +#define SDR0_SDSTP2_P2XFS_DECODE(n) ((((unsigned long)(n))>>8)&0x03) + +#define SDR0_SDSTP3 0x0023 + +#define SDR0_PINSTP 0x0040 +#define SDR0_PINSTP_BOOTSTRAP_MASK 0xC0000000 /* Strap Bits */ +#define SDR0_PINSTP_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 (EBC boot) */ +#define SDR0_PINSTP_BOOTSTRAP_SETTINGS1 0x40000000 /* Default strap settings 1 (PCI boot) */ +#define SDR0_PINSTP_BOOTSTRAP_IIC_54_EN 0x80000000 /* Serial Device Enabled - Addr = 0x54 */ +#define SDR0_PINSTP_BOOTSTRAP_IIC_50_EN 0xC0000000 /* Serial Device Enabled - Addr = 0x50 */ +#define SDR0_SDCS 0x0060 +#define SDR0_ECID0 0x0080 +#define SDR0_ECID1 0x0081 +#define SDR0_ECID2 0x0082 +#define SDR0_JTAG 0x00C0 + +#define SDR0_DDR0 0x00E1 +#define SDR0_DDR0_DPLLRST 0x80000000 +#define SDR0_DDR0_DDRM_MASK 0x60000000 +#define SDR0_DDR0_DDRM_DDR1 0x20000000 +#define SDR0_DDR0_DDRM_DDR2 0x40000000 +#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29) +#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03) +#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0) +#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF) + +#define SDR0_UART0 0x0120 +#define SDR0_UART1 0x0121 +#define SDR0_UART2 0x0122 +#define SDR0_UARTX_UXICS_MASK 0xF0000000 +#define SDR0_UARTX_UXICS_PLB 0x20000000 +#define SDR0_UARTX_UXEC_MASK 0x00800000 +#define SDR0_UARTX_UXEC_INT 0x00000000 +#define SDR0_UARTX_UXEC_EXT 0x00800000 +#define SDR0_UARTX_UXDIV_MASK 0x000000FF +#define SDR0_UARTX_UXDIV_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define SDR0_UARTX_UXDIV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0xFF)+1) + +#define SDR0_CP440 0x0180 +#define SDR0_CP440_ERPN_MASK 0x30000000 +#define SDR0_CP440_ERPN_MASK_HI 0x3000 +#define SDR0_CP440_ERPN_MASK_LO 0x0000 +#define SDR0_CP440_ERPN_EBC 0x10000000 +#define SDR0_CP440_ERPN_EBC_HI 0x1000 +#define SDR0_CP440_ERPN_EBC_LO 0x0000 +#define SDR0_CP440_ERPN_PCI 0x20000000 +#define SDR0_CP440_ERPN_PCI_HI 0x2000 +#define SDR0_CP440_ERPN_PCI_LO 0x0000 +#define SDR0_CP440_ERPN_ENCODE(n) ((((unsigned long)(n))&0x03)<<28) +#define SDR0_CP440_ERPN_DECODE(n) ((((unsigned long)(n))>>28)&0x03) +#define SDR0_CP440_NTO1_MASK 0x00000002 +#define SDR0_CP440_NTO1_NTOP 0x00000000 +#define SDR0_CP440_NTO1_NTO1 0x00000002 +#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1) +#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01) + +#define SDR0_XCR0 0x01C0 +#define SDR0_XCR1 0x01C3 +#define SDR0_XCR2 0x01C6 +#define SDR0_XCRn_PAE_MASK 0x80000000 +#define SDR0_XCRn_PAE_DISABLE 0x00000000 +#define SDR0_XCRn_PAE_ENABLE 0x80000000 +#define SDR0_XCRn_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31) +#define SDR0_XCRn_PAE_DECODE(n) ((((unsigned long)(n))>>31)&0x01) +#define SDR0_XCRn_PHCE_MASK 0x40000000 +#define SDR0_XCRn_PHCE_DISABLE 0x00000000 +#define SDR0_XCRn_PHCE_ENABLE 0x40000000 +#define SDR0_XCRn_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30) +#define SDR0_XCRn_PHCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01) +#define SDR0_XCRn_PISE_MASK 0x20000000 +#define SDR0_XCRn_PISE_DISABLE 0x00000000 +#define SDR0_XCRn_PISE_ENABLE 0x20000000 +#define SDR0_XCRn_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29) +#define SDR0_XCRn_PISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01) +#define SDR0_XCRn_PCWE_MASK 0x10000000 +#define SDR0_XCRn_PCWE_DISABLE 0x00000000 +#define SDR0_XCRn_PCWE_ENABLE 0x10000000 +#define SDR0_XCRn_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28) +#define SDR0_XCRn_PCWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01) +#define SDR0_XCRn_PPIM_MASK 0x0F000000 +#define SDR0_XCRn_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24) +#define SDR0_XCRn_PPIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F) +#define SDR0_XCRn_PR64E_MASK 0x00800000 +#define SDR0_XCRn_PR64E_DISABLE 0x00000000 +#define SDR0_XCRn_PR64E_ENABLE 0x00800000 +#define SDR0_XCRn_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23) +#define SDR0_XCRn_PR64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01) +#define SDR0_XCRn_PXFS_MASK 0x00600000 +#define SDR0_XCRn_PXFS_100_133 0x00000000 +#define SDR0_XCRn_PXFS_66_100 0x00200000 +#define SDR0_XCRn_PXFS_50_66 0x00400000 +#define SDR0_XCRn_PXFS_0_33 0x00600000 +#define SDR0_XCRn_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21) +#define SDR0_XCRn_PXFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03) + +#define SDR0_XPLLC0 0x01C1 +#define SDR0_XPLLD0 0x01C2 +#define SDR0_XPLLC1 0x01C4 +#define SDR0_XPLLD1 0x01C5 +#define SDR0_XPLLC2 0x01C7 +#define SDR0_XPLLD2 0x01C8 +#define SDR0_SRST 0x0200 +#define SDR0_SLPIPE 0x0220 + +#define SDR0_AMP0 0x0240 +#define SDR0_AMP0_PRIORITY 0xFFFF0000 +#define SDR0_AMP0_ALTERNATE_PRIORITY 0x0000FF00 +#define SDR0_AMP0_RESERVED_BITS_MASK 0x000000FF + +#define SDR0_AMP1 0x0241 +#define SDR0_AMP1_PRIORITY 0xFC000000 +#define SDR0_AMP1_ALTERNATE_PRIORITY 0x0000E000 +#define SDR0_AMP1_RESERVED_BITS_MASK 0x03FF1FFF + +#define SDR0_MIRQ0 0x0260 +#define SDR0_MIRQ1 0x0261 +#define SDR0_MALTBL 0x0280 +#define SDR0_MALRBL 0x02A0 +#define SDR0_MALTBS 0x02C0 +#define SDR0_MALRBS 0x02E0 + +/* Reserved for Customer Use */ +#define SDR0_CUST0 0x4000 +#define SDR0_CUST0_AUTONEG_MASK 0x8000000 +#define SDR0_CUST0_NO_AUTONEG 0x0000000 +#define SDR0_CUST0_AUTONEG 0x8000000 +#define SDR0_CUST0_ETH_FORCE_MASK 0x6000000 +#define SDR0_CUST0_ETH_FORCE_10MHZ 0x0000000 +#define SDR0_CUST0_ETH_FORCE_100MHZ 0x2000000 +#define SDR0_CUST0_ETH_FORCE_1000MHZ 0x4000000 +#define SDR0_CUST0_ETH_DUPLEX_MASK 0x1000000 +#define SDR0_CUST0_ETH_HALF_DUPLEX 0x0000000 +#define SDR0_CUST0_ETH_FULL_DUPLEX 0x1000000 + +#define SDR0_SDSTP4 0x4001 +#define SDR0_CUST1 0x4002 +#define SDR0_SDSTP5 0x4003 +#define SDR0_CUST2 0x4004 +#define SDR0_SDSTP6 0x4005 +#define SDR0_CUST3 0x4006 +#define SDR0_SDSTP7 0x4007 + +#define SDR0_PFC0 0x4100 +#define SDR0_PFC0_GPIO_0 0x80000000 +#define SDR0_PFC0_PCIX0REQ2_N 0x00000000 +#define SDR0_PFC0_GPIO_1 0x40000000 +#define SDR0_PFC0_PCIX0REQ3_N 0x00000000 +#define SDR0_PFC0_GPIO_2 0x20000000 +#define SDR0_PFC0_PCIX0GNT2_N 0x00000000 +#define SDR0_PFC0_GPIO_3 0x10000000 +#define SDR0_PFC0_PCIX0GNT3_N 0x00000000 +#define SDR0_PFC0_GPIO_4 0x08000000 +#define SDR0_PFC0_PCIX1REQ2_N 0x00000000 +#define SDR0_PFC0_GPIO_5 0x04000000 +#define SDR0_PFC0_PCIX1REQ3_N 0x00000000 +#define SDR0_PFC0_GPIO_6 0x02000000 +#define SDR0_PFC0_PCIX1GNT2_N 0x00000000 +#define SDR0_PFC0_GPIO_7 0x01000000 +#define SDR0_PFC0_PCIX1GNT3_N 0x00000000 +#define SDR0_PFC0_GPIO_8 0x00800000 +#define SDR0_PFC0_PERREADY 0x00000000 +#define SDR0_PFC0_GPIO_9 0x00400000 +#define SDR0_PFC0_PERCS1_N 0x00000000 +#define SDR0_PFC0_GPIO_10 0x00200000 +#define SDR0_PFC0_PERCS2_N 0x00000000 +#define SDR0_PFC0_GPIO_11 0x00100000 +#define SDR0_PFC0_IRQ0 0x00000000 +#define SDR0_PFC0_GPIO_12 0x00080000 +#define SDR0_PFC0_IRQ1 0x00000000 +#define SDR0_PFC0_GPIO_13 0x00040000 +#define SDR0_PFC0_IRQ2 0x00000000 +#define SDR0_PFC0_GPIO_14 0x00020000 +#define SDR0_PFC0_IRQ3 0x00000000 +#define SDR0_PFC0_GPIO_15 0x00010000 +#define SDR0_PFC0_IRQ4 0x00000000 +#define SDR0_PFC0_GPIO_16 0x00008000 +#define SDR0_PFC0_IRQ5 0x00000000 +#define SDR0_PFC0_GPIO_17 0x00004000 +#define SDR0_PFC0_PERBE0_N 0x00000000 +#define SDR0_PFC0_GPIO_18 0x00002000 +#define SDR0_PFC0_PCI0GNT0_N 0x00000000 +#define SDR0_PFC0_GPIO_19 0x00001000 +#define SDR0_PFC0_PCI0GNT1_N 0x00000000 +#define SDR0_PFC0_GPIO_20 0x00000800 +#define SDR0_PFC0_PCI0REQ0_N 0x00000000 +#define SDR0_PFC0_GPIO_21 0x00000400 +#define SDR0_PFC0_PCI0REQ1_N 0x00000000 +#define SDR0_PFC0_GPIO_22 0x00000200 +#define SDR0_PFC0_PCI1GNT0_N 0x00000000 +#define SDR0_PFC0_GPIO_23 0x00000100 +#define SDR0_PFC0_PCI1GNT1_N 0x00000000 +#define SDR0_PFC0_GPIO_24 0x00000080 +#define SDR0_PFC0_PCI1REQ0_N 0x00000000 +#define SDR0_PFC0_GPIO_25 0x00000040 +#define SDR0_PFC0_PCI1REQ1_N 0x00000000 +#define SDR0_PFC0_GPIO_26 0x00000020 +#define SDR0_PFC0_PCI2GNT0_N 0x00000000 +#define SDR0_PFC0_GPIO_27 0x00000010 +#define SDR0_PFC0_PCI2GNT1_N 0x00000000 +#define SDR0_PFC0_GPIO_28 0x00000008 +#define SDR0_PFC0_PCI2REQ0_N 0x00000000 +#define SDR0_PFC0_GPIO_29 0x00000004 +#define SDR0_PFC0_PCI2REQ1_N 0x00000000 +#define SDR0_PFC0_GPIO_30 0x00000002 +#define SDR0_PFC0_UART1RX 0x00000000 +#define SDR0_PFC0_GPIO_31 0x00000001 +#define SDR0_PFC0_UART1TX 0x00000000 + +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_UART1_CTS_RTS_MASK 0x02000000 +#define SDR0_PFC1_UART1_DSR_DTR 0x00000000 +#define SDR0_PFC1_UART1_CTS_RTS 0x02000000 +#define SDR0_PFC1_UART2_IN_SERVICE_MASK 0x01000000 +#define SDR0_PFC1_UART2_NOT_IN_SERVICE 0x00000000 +#define SDR0_PFC1_UART2_IN_SERVICE 0x01000000 +#define SDR0_PFC1_ETH_GIGA_MASK 0x00200000 +#define SDR0_PFC1_ETH_10_100 0x00000000 +#define SDR0_PFC1_ETH_GIGA 0x00200000 +#define SDR0_PFC1_ETH_GIGA_ENCODE(n) ((((unsigned long)(n))&0x1)<<21) +#define SDR0_PFC1_ETH_GIGA_DECODE(n) ((((unsigned long)(n))>>21)&0x01) +#define SDR0_PFC1_CPU_TRACE_MASK 0x00180000 /* $218C */ +#define SDR0_PFC1_CPU_NO_TRACE 0x00000000 +#define SDR0_PFC1_CPU_TRACE 0x00080000 +#define SDR0_PFC1_CPU_TRACE_ENCODE(n) ((((unsigned long)(n))&0x3)<<19) /* $218C */ +#define SDR0_PFC1_CPU_TRACE_DECODE(n) ((((unsigned long)(n))>>19)&0x03) /* $218C */ + +#define SDR0_MFR 0x4300 +#endif /* CONFIG_440SPE */ + + #define SDR0_SDCS_SDD (0x80000000 >> 31) #if defined(CONFIG_440GP) @@ -1159,7 +2430,7 @@ /*-----------------------------------------------------------------------------+ | Clocking +-----------------------------------------------------------------------------*/ -#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) +#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) #define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */ #define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */ #define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */ @@ -1357,56 +2628,106 @@ /****************************************************************************** * GPIO macro register defines ******************************************************************************/ +#define GPIO0 0 +#define GPIO1 1 + #if defined(CONFIG_440GP) -#define GPIO_BASE0 (CFG_PERIPHERAL_BASE+0x00000700) +#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700) -#define GPIO0_OR (GPIO_BASE0+0x0) -#define GPIO0_TCR (GPIO_BASE0+0x4) -#define GPIO0_ODR (GPIO_BASE0+0x18) -#define GPIO0_IR (GPIO_BASE0+0x1C) +#define GPIO0_OR (GPIO0_BASE+0x0) +#define GPIO0_TCR (GPIO0_BASE+0x4) +#define GPIO0_ODR (GPIO0_BASE+0x18) +#define GPIO0_IR (GPIO0_BASE+0x1C) #endif /* CONFIG_440GP */ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) -#define GPIO_BASE0 (CFG_PERIPHERAL_BASE+0x00000B00) -#define GPIO_BASE1 (CFG_PERIPHERAL_BASE+0x00000C00) - -#define GPIO0_OR (GPIO_BASE0+0x0) -#define GPIO0_TCR (GPIO_BASE0+0x4) -#define GPIO0_OSRL (GPIO_BASE0+0x8) -#define GPIO0_OSRH (GPIO_BASE0+0xC) -#define GPIO0_TSRL (GPIO_BASE0+0x10) -#define GPIO0_TSRH (GPIO_BASE0+0x14) -#define GPIO0_ODR (GPIO_BASE0+0x18) -#define GPIO0_IR (GPIO_BASE0+0x1C) -#define GPIO0_RR1 (GPIO_BASE0+0x20) -#define GPIO0_RR2 (GPIO_BASE0+0x24) -#define GPIO0_RR3 (GPIO_BASE0+0x28) -#define GPIO0_ISR1L (GPIO_BASE0+0x30) -#define GPIO0_ISR1H (GPIO_BASE0+0x34) -#define GPIO0_ISR2L (GPIO_BASE0+0x38) -#define GPIO0_ISR2H (GPIO_BASE0+0x3C) -#define GPIO0_ISR3L (GPIO_BASE0+0x40) -#define GPIO0_ISR3H (GPIO_BASE0+0x44) - -#define GPIO1_OR (GPIO_BASE1+0x0) -#define GPIO1_TCR (GPIO_BASE1+0x4) -#define GPIO1_OSRL (GPIO_BASE1+0x8) -#define GPIO1_OSRH (GPIO_BASE1+0xC) -#define GPIO1_TSRL (GPIO_BASE1+0x10) -#define GPIO1_TSRH (GPIO_BASE1+0x14) -#define GPIO1_ODR (GPIO_BASE1+0x18) -#define GPIO1_IR (GPIO_BASE1+0x1C) -#define GPIO1_RR1 (GPIO_BASE1+0x20) -#define GPIO1_RR2 (GPIO_BASE1+0x24) -#define GPIO1_RR3 (GPIO_BASE1+0x28) -#define GPIO1_ISR1L (GPIO_BASE1+0x30) -#define GPIO1_ISR1H (GPIO_BASE1+0x34) -#define GPIO1_ISR2L (GPIO_BASE1+0x38) -#define GPIO1_ISR2H (GPIO_BASE1+0x3C) -#define GPIO1_ISR3L (GPIO_BASE1+0x40) -#define GPIO1_ISR3H (GPIO_BASE1+0x44) +#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00) +#define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00) + +/* Offsets */ +#define GPIOx_OR 0x00 /* GPIO Output Register */ +#define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */ +#define GPIOx_OSL 0x08 /* GPIO Output Select Register (Bits 0-31) */ +#define GPIOx_OSH 0x0C /* GPIO Ouput Select Register (Bits 32-63) */ +#define GPIOx_TSL 0x10 /* GPIO Three-State Select Register (Bits 0-31) */ +#define GPIOx_TSH 0x14 /* GPIO Three-State Select Register (Bits 32-63) */ +#define GPIOx_ODR 0x18 /* GPIO Open drain Register */ +#define GPIOx_IR 0x1C /* GPIO Input Register */ +#define GPIOx_RR1 0x20 /* GPIO Receive Register 1 */ +#define GPIOx_RR2 0x24 /* GPIO Receive Register 2 */ +#define GPIOx_RR3 0x28 /* GPIO Receive Register 3 */ +#define GPIOx_IS1L 0x30 /* GPIO Input Select Register 1 (Bits 0-31) */ +#define GPIOx_IS1H 0x34 /* GPIO Input Select Register 1 (Bits 32-63) */ +#define GPIOx_IS2L 0x38 /* GPIO Input Select Register 2 (Bits 0-31) */ +#define GPIOx_IS2H 0x3C /* GPIO Input Select Register 2 (Bits 32-63) */ +#define GPIOx_IS3L 0x40 /* GPIO Input Select Register 3 (Bits 0-31) */ +#define GPIOx_IS3H 0x44 /* GPIO Input Select Register 3 (Bits 32-63) */ + +#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO Output Register High or Low */ +#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO Three-state Control Reg High or Low */ +#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO Input register1 High or Low */ +#define GPIO_IS2(x) (x+GPIOx_IS2L) /* GPIO Input register2 High or Low */ +#define GPIO_IS3(x) (x+GPIOx_IS3L) /* GPIO Input register3 High or Low */ + +#define GPIO0_OR (GPIO0_BASE+0x0) +#define GPIO0_TCR (GPIO0_BASE+0x4) +#define GPIO0_OSRL (GPIO0_BASE+0x8) +#define GPIO0_OSRH (GPIO0_BASE+0xC) +#define GPIO0_TSRL (GPIO0_BASE+0x10) +#define GPIO0_TSRH (GPIO0_BASE+0x14) +#define GPIO0_ODR (GPIO0_BASE+0x18) +#define GPIO0_IR (GPIO0_BASE+0x1C) +#define GPIO0_RR1 (GPIO0_BASE+0x20) +#define GPIO0_RR2 (GPIO0_BASE+0x24) +#define GPIO0_RR3 (GPIO0_BASE+0x28) +#define GPIO0_ISR1L (GPIO0_BASE+0x30) +#define GPIO0_ISR1H (GPIO0_BASE+0x34) +#define GPIO0_ISR2L (GPIO0_BASE+0x38) +#define GPIO0_ISR2H (GPIO0_BASE+0x3C) +#define GPIO0_ISR3L (GPIO0_BASE+0x40) +#define GPIO0_ISR3H (GPIO0_BASE+0x44) + +#define GPIO1_OR (GPIO1_BASE+0x0) +#define GPIO1_TCR (GPIO1_BASE+0x4) +#define GPIO1_OSRL (GPIO1_BASE+0x8) +#define GPIO1_OSRH (GPIO1_BASE+0xC) +#define GPIO1_TSRL (GPIO1_BASE+0x10) +#define GPIO1_TSRH (GPIO1_BASE+0x14) +#define GPIO1_ODR (GPIO1_BASE+0x18) +#define GPIO1_IR (GPIO1_BASE+0x1C) +#define GPIO1_RR1 (GPIO1_BASE+0x20) +#define GPIO1_RR2 (GPIO1_BASE+0x24) +#define GPIO1_RR3 (GPIO1_BASE+0x28) +#define GPIO1_ISR1L (GPIO1_BASE+0x30) +#define GPIO1_ISR1H (GPIO1_BASE+0x34) +#define GPIO1_ISR2L (GPIO1_BASE+0x38) +#define GPIO1_ISR2H (GPIO1_BASE+0x3C) +#define GPIO1_ISR3L (GPIO1_BASE+0x40) +#define GPIO1_ISR3H (GPIO1_BASE+0x44) #endif +#define GPIO_GROUP_MAX 2 +#define GPIO_MAX 32 +#define GPIO_ALT1_SEL 0x40000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */ +#define GPIO_ALT2_SEL 0x80000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */ +#define GPIO_ALT3_SEL 0xC0000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */ +#define GPIO_MASK 0xC0000000 /* GPIO_MASK */ +#define GPIO_IN_SEL 0x40000000 /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */ + /* For the other GPIO number, you must shift */ + +#ifndef __ASSEMBLY__ + +typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t; +typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t; + +typedef struct { unsigned long add; /* gpio core base address */ + gpio_driver_t in_out; /* Driver Setting */ + gpio_select_t alt_nb; /* Selected Alternate */ +} gpio_param_s; + + +#endif /* __ASSEMBLY__ */ + /* * Macros for accessing the indirect EBC registers */ @@ -1448,6 +2769,9 @@ typedef struct { unsigned long freqOPB; unsigned long freqEPB; unsigned long freqPCI; +#ifdef CONFIG_440SPE + unsigned long freqDDR; +#endif unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */ unsigned long pciClkSync; /* PCI clock is synchronous */ } PPC440_SYS_INFO; diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h index d6d33b6957b..ec2e3629bb8 100644 --- a/include/ppc4xx_enet.h +++ b/include/ppc4xx_enet.h @@ -133,12 +133,21 @@ typedef struct emac_4xx_hw_st { #define EMAC_NUM_DEV 4 #elif (defined(CONFIG_440) || defined(CONFIG_405EP)) && \ defined(CONFIG_NET_MULTI) && \ - !defined(CONFIG_440SP) + !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) #define EMAC_NUM_DEV 2 #else #define EMAC_NUM_DEV 1 #endif +#ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */ +#define EMAC_STACR_OC_MASK (0x00008000) +#else +#define EMAC_STACR_OC_MASK (0x00000000) +#endif + +#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) +#define SDR0_PFC1_EM_1000 (0x00200000) +#endif /*ZMII Bridge Register addresses */ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) @@ -323,7 +332,7 @@ typedef struct emac_4xx_hw_st { #define EMAC_M0_WKE (0x04000000) /* on 440GX EMAC_MR1 has a different layout! */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* MODE Reg 1 */ #define EMAC_M1_FDE (0x80000000) #define EMAC_M1_ILE (0x40000000) @@ -424,8 +433,21 @@ typedef struct emac_4xx_hw_st { /* STA CONTROL REG */ #define EMAC_STACR_OC (0x00008000) #define EMAC_STACR_PHYE (0x00004000) + +#ifdef CONFIG_IBM_EMAC4_V4 /* EMAC4 V4 changed bit setting */ +#define EMAC_STACR_INDIRECT_MODE (0x00002000) +#define EMAC_STACR_WRITE (0x00000800) /* $BUC */ +#define EMAC_STACR_READ (0x00001000) /* $BUC */ +#define EMAC_STACR_OP_MASK (0x00001800) +#define EMAC_STACR_MDIO_ADDR (0x00000000) +#define EMAC_STACR_MDIO_WRITE (0x00000800) +#define EMAC_STACR_MDIO_READ (0x00001800) +#define EMAC_STACR_MDIO_READ_INC (0x00001000) +#else #define EMAC_STACR_WRITE (0x00002000) #define EMAC_STACR_READ (0x00001000) +#endif + #define EMAC_STACR_CLK_83MHZ (0x00000800) /* 0's for 50Mhz */ #define EMAC_STACR_CLK_66MHZ (0x00000400) #define EMAC_STACR_CLK_100MHZ (0x00000C00) diff --git a/include/s3c2400.h b/include/s3c2400.h index bc1f1e94bff..4fdc62ec119 100644 --- a/include/s3c2400.h +++ b/include/s3c2400.h @@ -63,71 +63,71 @@ typedef enum { #include <s3c24x0.h> -static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void) +static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void) { return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE; } -static inline S3C24X0_USB_HOST * const S3C24X0_GetBase_USB_HOST(void) +static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void) { return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE; } -static inline S3C24X0_INTERRUPT * const S3C24X0_GetBase_INTERRUPT(void) +static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void) { return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE; } -static inline S3C24X0_DMAS * const S3C24X0_GetBase_DMAS(void) +static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void) { return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE; } -static inline S3C24X0_CLOCK_POWER * const S3C24X0_GetBase_CLOCK_POWER(void) +static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void) { return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE; } -static inline S3C24X0_LCD * const S3C24X0_GetBase_LCD(void) +static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void) { return (S3C24X0_LCD * const)S3C24X0_LCD_BASE; } -static inline S3C24X0_UART * const S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) +static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr) { return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000)); } -static inline S3C24X0_TIMERS * const S3C24X0_GetBase_TIMERS(void) +static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void) { return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE; } -static inline S3C24X0_USB_DEVICE * const S3C24X0_GetBase_USB_DEVICE(void) +static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void) { return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE; } -static inline S3C24X0_WATCHDOG * const S3C24X0_GetBase_WATCHDOG(void) +static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void) { return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE; } -static inline S3C24X0_I2C * const S3C24X0_GetBase_I2C(void) +static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void) { return (S3C24X0_I2C * const)S3C24X0_I2C_BASE; } -static inline S3C24X0_I2S * const S3C24X0_GetBase_I2S(void) +static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void) { return (S3C24X0_I2S * const)S3C24X0_I2S_BASE; } -static inline S3C24X0_GPIO * const S3C24X0_GetBase_GPIO(void) +static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void) { return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE; } -static inline S3C24X0_RTC * const S3C24X0_GetBase_RTC(void) +static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void) { return (S3C24X0_RTC * const)S3C24X0_RTC_BASE; } -static inline S3C2400_ADC * const S3C2400_GetBase_ADC(void) +static inline S3C2400_ADC * S3C2400_GetBase_ADC(void) { return (S3C2400_ADC * const)S3C24X0_ADC_BASE; } -static inline S3C24X0_SPI * const S3C24X0_GetBase_SPI(void) +static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void) { return (S3C24X0_SPI * const)S3C24X0_SPI_BASE; } -static inline S3C2400_MMC * const S3C2400_GetBase_MMC(void) +static inline S3C2400_MMC * S3C2400_GetBase_MMC(void) { return (S3C2400_MMC * const)S3C2400_MMC_BASE; } diff --git a/include/serial.h b/include/serial.h index c8abb72e1fd..8c7b1c26c13 100644 --- a/include/serial.h +++ b/include/serial.h @@ -23,7 +23,7 @@ extern struct serial_device serial_scc_device; extern struct serial_device * default_serial_console (void); #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \ - || defined(CONFIG_405EP) + || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx) extern struct serial_device serial0_device; extern struct serial_device serial1_device; #endif diff --git a/include/spd_sdram.h b/include/spd_sdram.h index 4e754ec9e33..a2be96c1aa1 100644 --- a/include/spd_sdram.h +++ b/include/spd_sdram.h @@ -1,6 +1,6 @@ #ifndef _SPD_SDRAM_H_ #define _SPD_SDRAM_H_ -long int spd_sdram(int(read_spd)(uint addr)); +long int spd_sdram(void); #endif diff --git a/include/usb.h b/include/usb.h index 39d7f23cc71..bf715540417 100644 --- a/include/usb.h +++ b/include/usb.h @@ -108,6 +108,7 @@ struct usb_interface_descriptor { unsigned char iInterface; unsigned char no_of_ep; + unsigned char num_altsetting; unsigned char act_altsetting; struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS]; } __attribute__ ((packed)); diff --git a/include/version.h b/include/version.h index 4f8b498cf37..b56d2e9900b 100644 --- a/include/version.h +++ b/include/version.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2003 + * (C) Copyright 2000-2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -24,6 +24,6 @@ #ifndef __VERSION_H__ #define __VERSION_H__ -#define U_BOOT_VERSION "U-Boot 1.1.4" +#include "version_autogenerated.h" #endif /* __VERSION_H__ */ diff --git a/include/xyzModem.h b/include/xyzModem.h new file mode 100644 index 00000000000..f437bbd0bdf --- /dev/null +++ b/include/xyzModem.h @@ -0,0 +1,117 @@ +/* + *========================================================================== + * + * xyzModem.h + * + * RedBoot stream handler for xyzModem protocol + * + *========================================================================== + *####ECOSGPLCOPYRIGHTBEGIN#### + * ------------------------------------------- + * This file is part of eCos, the Embedded Configurable Operating System. + * Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. + * Copyright (C) 2002 Gary Thomas + * + * eCos is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 or (at your option) any later version. + * + * eCos is distributed in the hope that it will be useful, but WITHOUT ANY + * WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with eCos; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * As a special exception, if other files instantiate templates or use macros + * or inline functions from this file, or you compile this file and link it + * with other works to produce a work based on this file, this file does not + * by itself cause the resulting work to be covered by the GNU General Public + * License. However the source code for this file must still be made available + * in accordance with section (3) of the GNU General Public License. + * + * This exception does not invalidate any other reasons why a work based on + * this file might be covered by the GNU General Public License. + * + * Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. + * at http: *sources.redhat.com/ecos/ecos-license/ + * ------------------------------------------- + *####ECOSGPLCOPYRIGHTEND#### + *========================================================================== + *#####DESCRIPTIONBEGIN#### + * + * Author(s): gthomas + * Contributors: gthomas + * Date: 2000-07-14 + * Purpose: + * Description: + * + * This code is part of RedBoot (tm). + * + *####DESCRIPTIONEND#### + * + *========================================================================== + */ + +#ifndef _XYZMODEM_H_ +#define _XYZMODEM_H_ + +#define xyzModem_xmodem 1 +#define xyzModem_ymodem 2 +/* Don't define this until the protocol support is in place */ +/*#define xyzModem_zmodem 3 */ + +#define xyzModem_access -1 +#define xyzModem_noZmodem -2 +#define xyzModem_timeout -3 +#define xyzModem_eof -4 +#define xyzModem_cancel -5 +#define xyzModem_frame -6 +#define xyzModem_cksum -7 +#define xyzModem_sequence -8 + +#define xyzModem_close 1 +#define xyzModem_abort 2 + + +#ifdef REDBOOT +extern getc_io_funcs_t xyzModem_io; +#else +#define CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT +#define CYGACC_CALL_IF_SET_CONSOLE_COMM(x) + +#define diag_vprintf vprintf +#define diag_printf printf +#define diag_vsprintf vsprintf + +#define CYGACC_CALL_IF_DELAY_US(x) udelay(x) + +typedef struct { + char *filename; + int mode; + int chan; +#ifdef CYGPKG_REDBOOT_NETWORKING + struct sockaddr_in *server; +#endif +} connection_info_t; + +#ifndef BOOL_WAS_DEFINED +#define BOOL_WAS_DEFINED +typedef unsigned int bool; +#endif + +#define false 0 +#define true 1 + +#endif + + +int xyzModem_stream_open(connection_info_t *info, int *err); +void xyzModem_stream_close(int *err); +void xyzModem_stream_terminate(bool method, int (*getc)(void)); +int xyzModem_stream_read(char *buf, int size, int *err); +char *xyzModem_error(int err); + +#endif /* _XYZMODEM_H_ */ |