Merge commit 'wd/master'

42 files changed, 396 insertions, 235 deletions

diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h
index 9440d80b500..85e144b682d 100644
--- a/include/asm-arm/arch-pxa/mmc.h
+++ b/include/asm-arm/arch-pxa/mmc.h
@@ -110,23 +110,6 @@
 #define MMC_DEFAULT_RCA			1
 
 #define MMC_BLOCK_SIZE			512
-#define MMC_CMD_RESET			0
-#define MMC_CMD_SEND_OP_COND		1
-#define MMC_CMD_ALL_SEND_CID		2
-#define MMC_CMD_SET_RCA			3
-#define MMC_CMD_SELECT_CARD		7
-#define MMC_CMD_SEND_CSD		9
-#define MMC_CMD_SEND_CID		10
-#define MMC_CMD_SEND_STATUS		13
-#define MMC_CMD_SET_BLOCKLEN		16
-#define MMC_CMD_READ_BLOCK		17
-#define MMC_CMD_RD_BLK_MULTI		18
-#define MMC_CMD_WRITE_BLOCK		24
-#define MMC_CMD_APP_CMD			55
-
-#define SD_CMD_APP_SET_BUS_WIDTH	6
-#define SD_CMD_APP_OP_COND		41
-
 #define MMC_MAX_BLOCK_SIZE		512
 
 #define MMC_R1_IDLE_STATE		0x01
diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h
index aaf2ea20c9b..b347857c9fc 100644
--- a/include/asm-arm/mach-types.h
+++ b/include/asm-arm/mach-types.h
@@ -1595,6 +1595,7 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_P300                 1602
 #define MACH_TYPE_XDACOMET             1603
 #define MACH_TYPE_DEXFLEX2             1604
+#define MACH_TYPE_SFFSDR               1657
 
 #ifdef CONFIG_ARCH_EBSA110
 # ifdef machine_arch_type
@@ -16500,6 +16501,18 @@ extern unsigned int __machine_arch_type;
 # define machine_is_schmoogie()	(0)
 #endif
 
+#ifdef CONFIG_MACH_SFFSDR
+# ifdef machine_arch_type
+#  undef machine_arch_type
+#  define machine_arch_type	__machine_arch_type
+# else
+#  define machine_arch_type	MACH_TYPE_SFFSDR
+# endif
+# define machine_is_sffsdr()	(machine_arch_type == MACH_TYPE_SFFSDR)
+#else
+# define machine_is_sffsdr()	(0)
+#endif
+
 #ifdef CONFIG_MACH_AZTOOL
 # ifdef machine_arch_type
 #  undef machine_arch_type
diff --git a/include/asm-arm/u-boot-arm.h b/include/asm-arm/u-boot-arm.h
index 41e7a8f7d3f..4ee5a327e5f 100644
--- a/include/asm-arm/u-boot-arm.h
+++ b/include/asm-arm/u-boot-arm.h
@@ -52,7 +52,7 @@ void	setup_revision_tag (struct tag **params);
 /* To be fixed!							*/
 /* ------------------------------------------------------------ */
 /* common/cmd_nvedit.c */
-void	setenv		(char *, char *);
+int	setenv		(char *, char *);
 
 /* cpu/.../interrupt.c */
 void	reset_timer_masked	(void);
diff --git a/include/asm-avr32/arch-at32ap700x/gpio.h b/include/asm-avr32/arch-at32ap700x/gpio.h
index ef20ceaab7c..8c922c7c65a 100644
--- a/include/asm-avr32/arch-at32ap700x/gpio.h
+++ b/include/asm-avr32/arch-at32ap700x/gpio.h
@@ -180,6 +180,11 @@
 #define GPIO_PIN_PE25	(GPIO_PIOE_BASE + 25)
 #define GPIO_PIN_PE26	(GPIO_PIOE_BASE + 26)
 
+#define GPIOF_PULLUP	0x00000001	/* (not-OUT) Enable pull-up */
+#define GPIOF_OUTPUT	0x00000002	/* (OUT) Enable output driver */
+#define GPIOF_DEGLITCH	0x00000004	/* (IN) Filter glitches */
+#define GPIOF_MULTIDRV	0x00000008	/* Enable multidriver option */
+
 static inline void *gpio_pin_to_addr(unsigned int pin)
 {
 	switch (pin >> 5) {
@@ -200,6 +205,9 @@ static inline void *gpio_pin_to_addr(unsigned int pin)
 
 void gpio_select_periph_A(unsigned int pin, int use_pullup);
 void gpio_select_periph_B(unsigned int pin, int use_pullup);
+void gpio_select_pio(unsigned int pin, unsigned long gpiof_flags);
+void gpio_set_value(unsigned int pin, int value);
+int gpio_get_value(unsigned int pin);
 
 void gpio_enable_ebi(void);
 
diff --git a/include/asm-avr32/arch-at32ap700x/mmc.h b/include/asm-avr32/arch-at32ap700x/mmc.h
index 6a33fef5a81..9caba9168e6 100644
--- a/include/asm-avr32/arch-at32ap700x/mmc.h
+++ b/include/asm-avr32/arch-at32ap700x/mmc.h
@@ -71,25 +71,6 @@ struct mmc_csd
 	u8	one:1;
 };
 
-/* MMC Command numbers */
-#define MMC_CMD_GO_IDLE_STATE		0
-#define MMC_CMD_SEND_OP_COND		1
-#define MMC_CMD_ALL_SEND_CID		2
-#define MMC_CMD_SET_RELATIVE_ADDR	3
-#define MMC_CMD_SD_SEND_RELATIVE_ADDR	3
-#define MMC_CMD_SET_DSR			4
-#define MMC_CMD_SELECT_CARD		7
-#define MMC_CMD_SEND_CSD		9
-#define MMC_CMD_SEND_CID		10
-#define MMC_CMD_SEND_STATUS		13
-#define MMC_CMD_SET_BLOCKLEN		16
-#define MMC_CMD_READ_SINGLE_BLOCK	17
-#define MMC_CMD_READ_MULTIPLE_BLOCK	18
-#define MMC_CMD_WRITE_BLOCK		24
-#define MMC_CMD_APP_CMD			55
-
-#define MMC_ACMD_SD_SEND_OP_COND	41
-
 #define R1_ILLEGAL_COMMAND		(1 << 22)
 #define R1_APP_CMD			(1 << 5)
 
diff --git a/include/asm-ppc/bitops.h b/include/asm-ppc/bitops.h
index 4e9c608341e..daa66cf9185 100644
--- a/include/asm-ppc/bitops.h
+++ b/include/asm-ppc/bitops.h
@@ -152,6 +152,7 @@ extern __inline__ int test_bit(int nr, __const__ volatile void *addr)
 }
 
 /* Return the bit position of the most significant 1 bit in a word */
+/* - the result is undefined when x == 0 */
 extern __inline__ int __ilog2(unsigned int x)
 {
 	int lz;
@@ -167,6 +168,57 @@ extern __inline__ int ffz(unsigned int x)
 	return __ilog2(x & -x);
 }
 
+/*
+ * fls: find last (most-significant) bit set.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ *
+ * On powerpc, __ilog2(0) returns -1, but this is not safe in general
+ */
+static __inline__ int fls(unsigned int x)
+{
+	return __ilog2(x) + 1;
+}
+
+/**
+ * fls64 - find last set bit in a 64-bit word
+ * @x: the word to search
+ *
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffsll, but returns the position of the most significant set bit.
+ *
+ * fls64(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 64.
+ */
+#if BITS_PER_LONG == 32
+static inline int fls64(__u64 x)
+{
+	__u32 h = x >> 32;
+	if (h)
+		return fls(h) + 32;
+	return fls(x);
+}
+#elif BITS_PER_LONG == 64
+static inline int fls64(__u64 x)
+{
+	if (x == 0)
+		return 0;
+	return __ilog2(x) + 1;
+}
+#else
+#error BITS_PER_LONG not 32 or 64
+#endif
+
+static inline int __ilog2_u64(u64 n)
+{
+	return fls64(n) - 1;
+}
+
+static inline int ffs64(u64 x)
+{
+	return __ilog2_u64(x & -x) + 1ull;
+}
+
 #ifdef __KERNEL__
 
 /*
diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h
index 83931f17f53..e151f0c1139 100644
--- a/include/asm-ppc/ppc4xx-sdram.h
+++ b/include/asm-ppc/ppc4xx-sdram.h
@@ -284,8 +284,8 @@
 #if defined(CONFIG_440SPE) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT)
 #define SDRAM_RXBAS_SDBA_MASK		0xFFE00000	/* Base address	*/
-#define SDRAM_RXBAS_SDBA_ENCODE(n)	((((u32)(n))&0xFFE00000)>>2)
-#define SDRAM_RXBAS_SDBA_DECODE(n)	((((u32)(n))&0xFFE00000)<<2)
+#define SDRAM_RXBAS_SDBA_ENCODE(n)	((u32)(((phys_size_t)(n) >> 2) & 0xFFE00000))
+#define SDRAM_RXBAS_SDBA_DECODE(n)	((((phys_size_t)(n)) & 0xFFE00000) << 2)
 #endif /* CONFIG_440SPE */
 #if defined(CONFIG_440SP)
 #define SDRAM_RXBAS_SDBA_MASK		0xFF800000	/* Base address	*/
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 139e6869df7..10fd478baba 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -968,10 +968,17 @@ struct cpu_type {
 	u32 soc_ver;
 };
 
-struct cpu_type *identify_cpu(uint ver);
+struct cpu_type *identify_cpu(u32 ver);
 
+#if defined(CONFIG_MPC85xx)
 #define CPU_TYPE_ENTRY(n, v) \
 	{ .name = #n, .soc_ver = SVR_##v, }
+#else
+#if defined(CONFIG_MPC83XX)
+#define CPU_TYPE_ENTRY(x) {#x, SPR_##x}
+#endif
+#endif
+
 
 #ifndef CONFIG_MACH_SPECIFIC
 extern int _machine;
diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h
index 2a27d06798d..ede0b1a8dbf 100644
--- a/include/asm-sparc/io.h
+++ b/include/asm-sparc/io.h
@@ -70,7 +70,6 @@
  * that can be used to access the memory range with the caching
  * properties specified by "flags".
  */
-typedef unsigned long phys_addr_t;
 
 #define MAP_NOCACHE	(0)
 #define MAP_WRCOMBINE	(0)
diff --git a/include/asm-sparc/types.h b/include/asm-sparc/types.h
index 69f93d60b81..2cf974a7a9c 100644
--- a/include/asm-sparc/types.h
+++ b/include/asm-sparc/types.h
@@ -65,6 +65,9 @@ typedef unsigned long long u64;
 /* DMA addresses are 32-bits wide */
 typedef u32 dma_addr_t;
 
+typedef unsigned long phys_addr_t;
+typedef unsigned long phys_size_t;
+
 #endif				/* __KERNEL__ */
 #endif				/* __ASSEMBLY__ */
 
diff --git a/include/common.h b/include/common.h
index fd5adb3d6db..2fcb1fd379f 100644
--- a/include/common.h
+++ b/include/common.h
@@ -243,9 +243,9 @@ char	*getenv	     (char *);
 int	getenv_r     (char *name, char *buf, unsigned len);
 int	saveenv	     (void);
 #ifdef CONFIG_PPC		/* ARM version to be fixed! */
-void inline setenv   (char *, char *);
+int inline setenv   (char *, char *);
 #else
-void	setenv	     (char *, char *);
+int	setenv	     (char *, char *);
 #ifdef CONFIG_HAS_UID
 void	forceenv     (char *, char *);
 #endif
@@ -607,8 +607,10 @@ ulong	simple_strtoul(const char *cp,char **endp,unsigned int base);
 unsigned long long	simple_strtoull(const char *cp,char **endp,unsigned int base);
 #endif
 long	simple_strtol(const char *cp,char **endp,unsigned int base);
-void	panic(const char *fmt, ...);
-int	sprintf(char * buf, const char *fmt, ...);
+void	panic(const char *fmt, ...)
+		__attribute__ ((format (__printf__, 1, 2)));
+int	sprintf(char * buf, const char *fmt, ...)
+		__attribute__ ((format (__printf__, 2, 3)));
 int	vsprintf(char *buf, const char *fmt, va_list args);
 
 /* lib_generic/crc32.c */
@@ -630,7 +632,8 @@ int	disable_ctrlc (int);	/* 1 to disable, 0 to enable Control-C detect */
  */
 
 /* serial stuff */
-void	serial_printf (const char *fmt, ...);
+void	serial_printf (const char *fmt, ...)
+		__attribute__ ((format (__printf__, 1, 2)));
 
 /* stdin */
 int	getc(void);
@@ -639,7 +642,8 @@ int	tstc(void);
 /* stdout */
 void	putc(const char c);
 void	puts(const char *s);
-void	printf(const char *fmt, ...);
+void	printf(const char *fmt, ...)
+		__attribute__ ((format (__printf__, 1, 2)));
 void	vprintf(const char *fmt, va_list args);
 
 /* stderr */
@@ -656,7 +660,8 @@ void	vprintf(const char *fmt, va_list args);
 #define stderr		2
 #define MAX_FILES	3
 
-void	fprintf(int file, const char *fmt, ...);
+void	fprintf(int file, const char *fmt, ...)
+		__attribute__ ((format (__printf__, 2, 3)));
 void	fputs(int file, const char *s);
 void	fputc(int file, const char c);
 int	ftstc(int file);
@@ -682,6 +687,9 @@ void __attribute__((weak)) show_boot_progress (int val);
 #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
 #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
 
+#define ALIGN(x,a)		__ALIGN_MASK((x),(typeof(x))(a)-1)
+#define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
+
 /* Multicore arch functions */
 #ifdef CONFIG_MP
 int cpu_status(int nr);
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 23508f9f5ae..59d0bdbeb2e 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -197,6 +197,13 @@
 
 #define CONFIG_BAUDRATE		115200
 
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+#if defined(CONFIG_OF_LIBFDT)
+#define OF_CPU			"cpu@0"
+#define OF_TBCLK		(bd->bi_busfreq / 4)
+#endif
+
 /*
  * BOOTP options
  */
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 37e3ca40b3f..870583845d9 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -355,7 +355,6 @@
 
 /* SPI */
 #define CONFIG_MPC8XXX_SPI
-#define CONFIG_HARD_SPI			/* SPI with hardware support */
 #undef CONFIG_SOFT_SPI			/* SPI bit-banged */
 
 /* GPIOs.  Used as SPI chip selects */
diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h
index 349ca14bbaf..b412655b6dd 100644
--- a/include/configs/MVBLM7.h
+++ b/include/configs/MVBLM7.h
@@ -27,7 +27,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define MV_VERSION  "v1.0.1"
+#include <version.h>
 
 /*
  * High Level Configuration Options
@@ -262,7 +262,7 @@
 #define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND 	CFG_ENV_SIZE
 
-#define CONFIG_LOADS_ECHO 
+#define CONFIG_LOADS_ECHO
 #define CFG_LOADS_BAUD_CHANGE
 
 /*
@@ -336,6 +336,7 @@
 #define CFG_HID0_FINAL	CFG_HID0_INIT
 
 #define CFG_HID2	HID2_HBE
+#define CONFIG_HIGH_BATS	1
 
 /* DDR  */
 #define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
@@ -446,7 +447,7 @@
 	"mv_dtb_addr=" MV_DTB_ADDR "\0"				\
 	"mv_dtb_addr_ram=" MV_DTB_ADDR_RAM "\0"			\
 	"dtb_name=" MV_DTB_NAME "\0"				\
-	"mv_version=" MV_VERSION "\0"				\
+	"mv_version=" U_BOOT_VERSION "\0"			\
 	"dhcp_client_id=" MV_CI "\0"				\
 	"dhcp_vendor-class-identifier=" MV_VCI "\0"		\
 	"netretry=no\0"						\
diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h
index 99e1179e681..fa0e5db0216 100644
--- a/include/configs/MigoR.h
+++ b/include/configs/MigoR.h
@@ -45,10 +45,6 @@
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"console=ttySC0,115200 root=1f01"
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		192.168.10.100
-#define CONFIG_SERVERIP		192.168.10.77
-#define CONFIG_GATEWAYIP	192.168.10.77
 
 #define CONFIG_VERSION_VARIABLE
 #undef  CONFIG_SHOW_BOOT_PROGRESS
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 3fc99756371..84d235ea9d5 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -114,6 +114,8 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_MMC
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
 
 #undef CONFIG_CMD_AUTOSCRIPT
 #undef CONFIG_CMD_FPGA
@@ -126,6 +128,11 @@
 #define CFG_NR_PIOS			5
 #define CFG_HSDRAMC			1
 #define CONFIG_MMC			1
+#define CONFIG_ATMEL_MCI		1
+#define CONFIG_ATMEL_SPI		1
+
+#define CONFIG_SPI_FLASH		1
+#define CONFIG_SPI_FLASH_ATMEL		1
 
 #define CFG_DCACHE_LINESZ		32
 #define CFG_ICACHE_LINESZ		32
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index ba18eb63c7f..90910bb98a5 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -153,6 +153,7 @@
 #define CFG_NR_PIOS			5
 #define CFG_HSDRAMC			1
 #define CONFIG_MMC			1
+#define CONFIG_ATMEL_MCI		1
 
 #define CFG_DCACHE_LINESZ		32
 #define CFG_ICACHE_LINESZ		32
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index a528ddfb0e9..03472a8869c 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -136,6 +136,7 @@
 #define CONFIG_PIO2			1
 #define CFG_HSDRAMC			1
 #define CONFIG_MMC			1
+#define CONFIG_ATMEL_MCI		1
 
 #define CFG_DCACHE_LINESZ		32
 #define CFG_ICACHE_LINESZ		32
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index fc9585e84d2..07add821a94 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -136,6 +136,7 @@
 #define CONFIG_PIO2			1
 #define CFG_HSDRAMC			1
 #define CONFIG_MMC			1
+#define CONFIG_ATMEL_MCI		1
 
 #define CFG_DCACHE_LINESZ		32
 #define CFG_ICACHE_LINESZ		32
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index 9fd49a53a34..f9af67540a0 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -153,6 +153,7 @@
 #define CFG_NR_PIOS			5
 #define CFG_HSDRAMC			1
 #define CONFIG_MMC			1
+#define CONFIG_ATMEL_MCI		1
 
 #define CFG_DCACHE_LINESZ		32
 #define CFG_ICACHE_LINESZ		32
diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h
new file mode 100644
index 00000000000..0e49e6c1592
--- /dev/null
+++ b/include/configs/davinci_sffsdr.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+#include <asm/sizes.h>
+
+/* Board */
+#define SFFSDR
+#define CFG_NAND_LARGEPAGE
+#define CFG_USE_NAND
+#define CFG_USE_DSPLINK		/* This is to prevent U-Boot from
+				 * powering ON the DSP. */
+/* SoC Configuration */
+#define CONFIG_ARM926EJS			/* arm926ejs CPU core */
+#define CONFIG_SYS_CLK_FREQ	297000000	/* Arm Clock frequency */
+#define CFG_TIMERBASE		0x01c21400	/* use timer 0 */
+#define CFG_HZ_CLOCK		27000000	/* Timer Input clock freq */
+#define CFG_HZ			1000
+/* EEPROM definitions for Atmel 24LC64 EEPROM chip */
+#define CFG_I2C_EEPROM_ADDR_LEN		2
+#define CFG_I2C_EEPROM_ADDR		0x50
+#define CFG_EEPROM_PAGE_WRITE_BITS	5
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+/* Memory Info */
+#define CFG_MALLOC_LEN		(0x10000 + 256*1024)	/* malloc() len */
+#define CFG_GBL_DATA_SIZE	128		/* reserved for initial data */
+#define CFG_MEMTEST_START	0x80000000	/* memtest start address */
+#define CFG_MEMTEST_END		0x81000000	/* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE	(256*1024)	/* regular stack */
+#define PHYS_SDRAM_1		0x80000000	/* DDR Start */
+#define PHYS_SDRAM_1_SIZE	0x08000000	/* DDR size 128MB */
+#define DDR_4BANKS				/* 4-bank DDR2 (128MB) */
+/* Serial Driver info */
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	4		/* NS16550 register size */
+#define CFG_NS16550_COM1	0x01c20000	/* Base address of UART0 */
+#define CFG_NS16550_CLK		27000000	/* Input clock to NS16550 */
+#define CONFIG_CONS_INDEX	1		/* use UART0 for console */
+#define CONFIG_BAUDRATE		115200		/* Default baud rate */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+/* I2C Configuration */
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CFG_I2C_SPEED		80000	/* 100Kbps won't work, silicon bug */
+#define CFG_I2C_SLAVE		10	/* Bogus, master-only in U-Boot */
+/* Network & Ethernet Configuration */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT	10
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+/* Flash & Environment */
+#undef CFG_ENV_IS_IN_FLASH
+#define CFG_NO_FLASH
+#define CFG_ENV_IS_IN_NAND		/* U-Boot env in NAND Flash  */
+#define CFG_ENV_SECT_SIZE	2048	/* Env sector Size */
+#define CFG_ENV_SIZE		SZ_128K
+#define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is loaded by a bootloader */
+#define CONFIG_SKIP_RELOCATE_UBOOT	/* to a proper address, init done */
+#define CFG_NAND_BASE		0x02000000
+#define CFG_NAND_HW_ECC
+#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices */
+#define NAND_MAX_CHIPS		1
+#define CFG_ENV_OFFSET		0x0	/* Block 0--not used by bootcode */
+/* I2C switch definitions for PCA9543 chip */
+#define CFG_I2C_PCA9543_ADDR		0x70
+#define CFG_I2C_PCA9543_ADDR_LEN	0	/* Single register. */
+#define CFG_I2C_PCA9543_ENABLE_CH0	0x01	/* Enable channel 0. */
+/* U-Boot general configuration */
+#undef CONFIG_USE_IRQ				/* No IRQ/FIQ in U-Boot */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_BOOTDELAY	5		/* Autoboot after 5 seconds. */
+#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
+#define CFG_PROMPT		"U-Boot > "	/* Monitor Command Prompt */
+#define CFG_CBSIZE		1024		/* Console I/O Buffer Size  */
+#define CFG_PBSIZE							\
+		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)	/* Print buffer size */
+#define CFG_MAXARGS		16		/* max number of command args */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_LOAD_ADDR		0x80700000	/* Default Linux kernel
+						 * load address. */
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE		/* Won't work with hush so far,
+					 * may be later */
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_CMDLINE_EDITING
+#define CFG_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+/* Linux Information */
+#define LINUX_BOOT_PARAM_ADDR	0x80000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS			\
+	"mem=56M "			\
+	"console=ttyS0,115200n8 "	\
+	"root=/dev/nfs rw noinitrd ip=dhcp "	\
+	"nfsroot=${serverip}:/nfsroot/sffsdr "	\
+	"eth0=${ethaddr}"
+#define CONFIG_BOOTCOMMAND	\
+	"nand read 87A00000 100000 300000;"	\
+	"bootelf 87A00000"
+/* U-Boot commands */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+/* KGDB support (if any) */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	1	/* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index d3789bd67a8..f07e470683a 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -41,6 +41,13 @@
 #define CFG_4xx_RESET_TYPE	0x2	/* use chip reset on this board	*/
 
 /*
+ * Enable this board for more than 2GB of SDRAM
+ */
+#define CONFIG_PHYS_64BIT
+#define	CONFIG_VERY_BIG_RAM
+#define CONFIG_MAX_MEM_MAPPED	((phys_size_t)2 << 30)
+
+/*
  * Include common defines/options for all AMCC eval boards
  */
 #define CONFIG_HOSTNAME		katmai
diff --git a/include/configs/korat.h b/include/configs/korat.h
index 765566697f9..4ca4ed00667 100644
--- a/include/configs/korat.h
+++ b/include/configs/korat.h
@@ -129,7 +129,7 @@
 
 #define CFG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	      */
 #define CFG_ENV_ADDR		(CFG_FLASH1_TOP - CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector   */
+#define CFG_ENV_SIZE		0x2000	/* Total Size of Environment Sector   */
 
 /* Address and size of Redundant Environment Sector */
 #define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
@@ -145,7 +145,6 @@
 #define CONFIG_DDR_ECC			/* Use ECC when available	*/
 #define SPD_EEPROM_ADDRESS	{0x50}
 #define CONFIG_PROG_SDRAM_TLB
-#define CFG_DRAM_TEST
 #define CFG_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
 					/* 440EPx errata CHIP 11	*/
 
@@ -185,7 +184,7 @@
 #define CFG_ROOTPATH		"rootpath=/opt/eldk/ppc_4xxFP\0"
 
 /* Note: kernel_addr and ramdisk_addr assume that FLASH1 is 64 MiB. */
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
+#define CONFIG_EXTRA_ENV_SETTINGS					\
 	CFG_BOOTFILE							\
 	CFG_ROOTPATH							\
 	"netdev=eth0\0"							\
@@ -216,7 +215,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
-#define	CONFIG_IBM_EMAC4_V4	1
+#define CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		2	/* PHY address, See schematics	*/
 #define CONFIG_PHY_DYNAMIC_ANEG	1
@@ -548,4 +547,8 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use	*/
 #endif
 
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index 1945918300c..319923ad6ef 100644
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -54,6 +54,7 @@
 
 #define CONFIG_405		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
+#define CONFIG_XILINX_405	1
 #define CONFIG_XILINX_ML300	1	/* ...on a Xilinx ML300 board	*/
 
 #define CONFIG_SYSTEMACE	1
diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h
index 8d92a13e1cb..7298e55c708 100644
--- a/include/configs/ms7722se.h
+++ b/include/configs/ms7722se.h
@@ -40,10 +40,6 @@
 #define CONFIG_BAUDRATE		115200
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTARGS		"console=ttySC0,115200 root=1f01"
-#define CONFIG_NETMASK          255.255.255.0
-#define CONFIG_IPADDR		192.168.0.22
-#define CONFIG_SERVERIP		192.168.0.1
-#define CONFIG_GATEWAYIP	192.168.0.1
 
 #define CONFIG_VERSION_VARIABLE
 #undef  CONFIG_SHOW_BOOT_PROGRESS
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index c20bacad228..e269336e82a 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -35,12 +35,6 @@
 #define CONFIG_BOOTARGS		"console=ttySC0,115200"
 #define CONFIG_ENV_OVERWRITE	1
 
-/* Network setting */
-#define CONFIG_NETMASK		255.0.0.0
-#define CONFIG_IPADDR		10.0.192.51
-#define CONFIG_SERVERIP		10.0.0.1
-#define CONFIG_GATEWAYIP	10.0.0.1
-
 /* SDRAM */
 #define CFG_SDRAM_BASE		(0x8C000000)
 #define CFG_SDRAM_SIZE		(0x04000000)
@@ -60,45 +54,27 @@
 #define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 32 * 1024 * 1024)
 /* Address of u-boot image in Flash */
 #define CFG_MONITOR_BASE	(CFG_FLASH_BASE)
-#define CFG_MONITOR_LEN		(128 * 1024)
+#define CFG_MONITOR_LEN		(256 * 1024)
 /* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN		(256 * 1024)
+#define CFG_MALLOC_LEN		(1024 * 1024)
 /* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_SIZE	(256)
 #define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
 
 /*
- * NOR Flash
+ * NOR Flash ( Spantion S29GL256P )
  */
 #define CFG_FLASH_CFI
 #define CFG_FLASH_CFI_DRIVER
-
-#if defined(CONFIG_R2DPLUS_OLD)
-#define CFG_FLASH_BASE		(0xA0000000)
-#define CFG_MAX_FLASH_BANKS (1)	/* Max number of
-				 * Flash memory banks
-				 */
-#define CFG_MAX_FLASH_SECT  142
-#define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE }
-
-#else /* CONFIG_R2DPLUS_OLD */
-
 #define CFG_FLASH_BASE		(0xA0000000)
-#define CFG_FLASH_CFI_WIDTH	0x04	/* 32bit */
-#define CFG_MAX_FLASH_BANKS	(2)
-#define CFG_MAX_FLASH_SECT	270
-#define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE,\
-			CFG_FLASH_BASE + 0x100000,\
-			CFG_FLASH_BASE + 0x400000,\
-			CFG_FLASH_BASE + 0x700000, }
-#endif /* CONFIG_R2DPLUS_OLD */
+#define CFG_MAX_FLASH_BANKS (1)
+#define CFG_MAX_FLASH_SECT  256
+#define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
 
 #define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_FLASH_ERASE_TOUT	120000
-#define CFG_FLASH_WRITE_TOUT	500
+#define CFG_ENV_SECT_SIZE	0x40000
+#define CFG_ENV_SIZE        (CFG_ENV_SECT_SIZE)
+#define CFG_ENV_ADDR        (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 
 /*
  * SuperH Clock setting
diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 4e895806aec..4c82c5a2fdc 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -1,7 +1,7 @@
 /*
  * Configuation settings for the Renesas R7780MP board
  *
- * Copyright (C) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
  * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
  *
  * See file CREDITS for list of people who contributed to this
@@ -31,7 +31,8 @@
 #define CONFIG_SH4A		1
 #define CONFIG_CPU_SH7780	1
 #define CONFIG_R7780MP		1
-#define __LITTLE_ENDIAN 1
+#define CFG_R7780MP_OLD_FLASH	1
+#define __LITTLE_ENDIAN__ 1
 
 /*
  * Command line configuration.
@@ -59,12 +60,6 @@
 /* check for keypress on bootdelay==0 */
 /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
 
-/* Network setting */
-#define CONFIG_NETMASK		255.0.0.0
-#define CONFIG_IPADDR		10.0.192.82
-#define CONFIG_SERVERIP		10.0.0.1
-#define CONFIG_GATEWAYIP	10.0.0.1
-
 #define CFG_SDRAM_BASE		(0x08000000)
 #define CFG_SDRAM_SIZE		(128 * 1024 * 1024)
 
@@ -80,22 +75,30 @@
 #define CFG_MEMTEST_START	(CFG_SDRAM_BASE)
 #define CFG_MEMTEST_END		(TEXT_BASE - 0x100000)
 
-/* NOR Flash (S29PL127J60TFI130) */
+/* Flash board support */
 #define CFG_FLASH_BASE		(0xA0000000)
-#define CFG_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-#define CFG_MAX_FLASH_BANKS (2)
-#define CFG_MAX_FLASH_SECT  270
-#define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE,\
+#ifdef CFG_R7780MP_OLD_FLASH
+/* NOR Flash (S29PL127J60TFI130) */
+# define CFG_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
+# define CFG_MAX_FLASH_BANKS	(2)
+# define CFG_MAX_FLASH_SECT	270
+# define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE,\
 				CFG_FLASH_BASE + 0x100000,\
 				CFG_FLASH_BASE + 0x400000,\
 				CFG_FLASH_BASE + 0x700000, }
+#else /* CFG_R7780MP_OLD_FLASH */
+/* NOR Flash (Spantion S29GL256P) */
+# define CFG_MAX_FLASH_BANKS	(1)
+# define CFG_MAX_FLASH_SECT		256
+# define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
+#endif /* CFG_R7780MP_OLD_FLASH */
 
 #define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 4 * 1024 * 1024)
 /* Address of u-boot image in Flash */
 #define CFG_MONITOR_BASE	(CFG_FLASH_BASE)
-#define CFG_MONITOR_LEN		(112 * 1024)
+#define CFG_MONITOR_LEN		(256 * 1024)
 /* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN		(256 * 1024)
+#define CFG_MALLOC_LEN		(1204 * 1024)
 
 /* size in bytes reserved for initial data */
 #define CFG_GBL_DATA_SIZE	(256)
@@ -110,7 +113,7 @@
 #define CFG_FLASH_EMPTY_INFO
 
 #define CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE	(16 * 1024)
+#define CFG_ENV_SECT_SIZE	(256 * 1024)
 #define CFG_ENV_SIZE		(CFG_ENV_SECT_SIZE)
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 #define CFG_FLASH_ERASE_TOUT	120000
@@ -141,8 +144,10 @@
 #endif /* CONFIG_CMD_PCI */
 
 #if defined(CONFIG_CMD_NET)
-/* #define CONFIG_NET_MULTI
-   #define CONFIG_RTL8169 */
+/*
+#define CONFIG_NET_MULTI
+#define CONFIG_RTL8169
+*/
 /* AX88696L Support(NE2000 base chip) */
 #define CONFIG_DRIVER_NE2000
 #define CONFIG_DRIVER_AX88796L
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index 4974fb43f72..2a398e8c45c 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -272,10 +272,14 @@
 
 #undef  SPI_INIT			/* no port initialization needed */
 #define SPI_READ        ((immr->im_ioport.iop_pdatd & I2C_MISO) != 0)
-#define SPI_SDA(bit)    if(bit) immr->im_ioport.iop_pdatd |=  I2C_MOSI; \
-			else    immr->im_ioport.iop_pdatd &= ~I2C_MOSI
-#define SPI_SCL(bit)    if(bit) immr->im_ioport.iop_pdatd |=  I2C_SCLK; \
-			else    immr->im_ioport.iop_pdatd &= ~I2C_SCLK
+#define SPI_SDA(bit)    do {						\
+			if(bit) immr->im_ioport.iop_pdatd |=  I2C_MOSI; \
+			else    immr->im_ioport.iop_pdatd &= ~I2C_MOSI;	\
+			} while (0)
+#define SPI_SCL(bit)    do {						\
+			if(bit) immr->im_ioport.iop_pdatd |=  I2C_SCLK; \
+			else    immr->im_ioport.iop_pdatd &= ~I2C_SCLK;	\
+			} while (0)
 #define SPI_DELAY                       /* No delay is needed */
 #endif /* CONFIG_SOFT_SPI */
 
diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h
index d537071a07d..7713eaaf59b 100644
--- a/include/configs/sh7763rdp.h
+++ b/include/configs/sh7763rdp.h
@@ -38,11 +38,7 @@
 #define CONFIG_CMD_SDRAM
 #define CONFIG_CMD_FLASH
 #define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_JFFS2
 
 #define CONFIG_BOOTDELAY        -1
 #define CONFIG_BOOTARGS         "console=ttySC2,115200 root=1f01"
@@ -66,12 +62,6 @@
 #define CFG_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate
 												settings for this board */
 
-/* Ethernet */
-#define CONFIG_SH_ETHER 1
-#define CONFIG_SH_ETHER_USE_PORT (1)
-#define CONFIG_SH_ETHER_PHY_ADDR (0x01)
-#define CFG_RX_ETH_BUFFER	(8)
-
 /* SDRAM */
 #define CFG_SDRAM_BASE		(0x8C000000)
 #define CFG_SDRAM_SIZE		(64 * 1024 * 1024)
diff --git a/include/environment.h b/include/environment.h
index bf9f669127f..481ea733dba 100644
--- a/include/environment.h
+++ b/include/environment.h
@@ -107,8 +107,8 @@ typedef	struct environment_s {
 	unsigned char	data[ENV_SIZE]; /* Environment data		*/
 } env_t;
 
-/* Pointer to function that returns a character from the environment */
-extern unsigned char (*env_get_char)(int);
+/* Function that returns a character from the environment */
+unsigned char env_get_char (int);
 
 /* Function that returns a pointer to a value from the environment */
 unsigned char *env_get_addr(int);
@@ -117,4 +117,7 @@ unsigned char env_get_char_memory (int index);
 /* Function that updates CRC of the enironment */
 void env_crc_update (void);
 
+/* [re]set to the default environment */
+void set_default_env(void);
+
 #endif	/* _ENVIRONMENT_H_ */
diff --git a/include/exports.h b/include/exports.h
index d6512cb3a45..6377875bc9a 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -22,7 +22,7 @@ void vprintf(const char *, va_list);
 void do_reset (void);
 unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base);
 char *getenv (char *name);
-void setenv (char *varname, char *varvalue);
+int setenv (char *varname, char *varvalue);
 long simple_strtol(const char *cp,char **endp,unsigned int base);
 int strcmp(const char * cs,const char * ct);
 #ifdef CONFIG_HAS_UID
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 71cb2d5c3b2..05ba375a825 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -201,13 +201,13 @@ static inline void mtd_erase_callback(struct erase_info *instr)
 #define MTD_DEBUG_LEVEL3	(3)	/* Noisy   */
 
 #ifdef CONFIG_MTD_DEBUG
-#define DEBUG(n, args...)				\
+#define MTDDEBUG(n, args...)				\
 	do {						\
 		if (n <= CONFIG_MTD_DEBUG_VERBOSE)	\
 			printk(KERN_INFO args);		\
 	} while(0)
 #else /* CONFIG_MTD_DEBUG */
-#define DEBUG(n, args...) do { } while(0)
+#define MTDDEBUG(n, args...) do { } while(0)
 
 #endif /* CONFIG_MTD_DEBUG */
 
diff --git a/include/lmb.h b/include/lmb.h
index 03d76678b8d..14e8727f066 100644
--- a/include/lmb.h
+++ b/include/lmb.h
@@ -43,6 +43,7 @@ extern phys_addr_t lmb_alloc_base(struct lmb *lmb, phys_size_t size, ulong align
 extern phys_addr_t __lmb_alloc_base(struct lmb *lmb, phys_size_t size, ulong align,
 			      phys_addr_t max_addr);
 extern int lmb_is_reserved(struct lmb *lmb, phys_addr_t addr);
+extern long lmb_free(struct lmb *lmb, phys_addr_t base, phys_size_t size);
 
 extern void lmb_dump_all(struct lmb *lmb);
 
diff --git a/include/lxt971a.h b/include/lxt971a.h
index f76c3368791..72145e0aa3e 100644
--- a/include/lxt971a.h
+++ b/include/lxt971a.h
@@ -30,15 +30,6 @@
 #define __LXT971A_H__
 
 /* PHY definitions (LXT971A) [2] */
-#define PHY_COMMON_CTRL			(0x00)
-#define PHY_COMMON_STAT			(0x01)
-#define PHY_COMMON_ID1			(0x02)
-#define PHY_COMMON_ID2			(0x03)
-#define PHY_COMMON_AUTO_ADV		(0x04)
-#define PHY_COMMON_AUTO_LNKB		(0x05)
-#define PHY_COMMON_AUTO_EXP		(0x06)
-#define PHY_COMMON_AUTO_NEXT		(0x07)
-#define PHY_COMMON_AUTO_LNKN		(0x08)
 #define PHY_LXT971_PORT_CFG		(0x10)
 #define PHY_LXT971_STAT2		(0x11)
 #define PHY_LXT971_INT_ENABLE		(0x12)
@@ -47,97 +38,6 @@
 #define PHY_LXT971_DIG_CFG		(0x1A)
 #define PHY_LXT971_TX_CTRL		(0x1E)
 
-/* CTRL PHY Control Register Bit Fields */
-#define PHY_COMMON_CTRL_RESET		(0x8000)
-#define PHY_COMMON_CTRL_LOOPBACK	(0x4000)
-#define PHY_COMMON_CTRL_SPD_MA		(0x2040)
-#define PHY_COMMON_CTRL_SPD_10		(0x0000)
-#define PHY_COMMON_CTRL_SPD_100		(0x2000)
-#define PHY_COMMON_CTRL_SPD_1000	(0x0040)
-#define PHY_COMMON_CTRL_SPD_RES		(0x2040)
-#define PHY_COMMON_CTRL_AUTO_NEG	(0x1000)
-#define PHY_COMMON_CTRL_POWER_DN	(0x0800)
-#define PHY_COMMON_CTRL_ISOLATE		(0x0400)
-#define PHY_COMMON_CTRL_RES_AUTO	(0x0200)
-#define PHY_COMMON_CTRL_DUPLEX		(0x0100)
-#define PHY_COMMON_CTRL_COL_TEST	(0x0080)
-#define PHY_COMMON_CTRL_RES1		(0x003F)
-
-/* STAT Status Register Bit Fields */
-#define PHY_COMMON_STAT_100BT4		(0x8000)
-#define PHY_COMMON_STAT_100BXFD		(0x4000)
-#define PHY_COMMON_STAT_100BXHD		(0x2000)
-#define PHY_COMMON_STAT_10BTFD		(0x1000)
-#define PHY_COMMON_STAT_10BTHD		(0x0800)
-#define PHY_COMMON_STAT_100BT2FD	(0x0400)
-#define PHY_COMMON_STAT_100BT2HD	(0x0200)
-#define PHY_COMMON_STAT_EXT_STAT	(0x0100)
-#define PHY_COMMON_STAT_RES1		(0x0080)
-#define PHY_COMMON_STAT_MF_PSUP		(0x0040)
-#define PHY_COMMON_STAT_AN_COMP		(0x0020)
-#define PHY_COMMON_STAT_RMT_FLT		(0x0010)
-#define PHY_COMMON_STAT_AN_CAP		(0x0008)
-#define PHY_COMMON_STAT_LNK_STAT	(0x0004)
-#define PHY_COMMON_STAT_JAB_DTCT	(0x0002)
-#define PHY_COMMON_STAT_EXT_CAP		(0x0001)
-
-/* AUTO_ADV Auto-neg Advert Register Bit Fields */
-#define PHY_COMMON_AUTO_ADV_NP		(0x8000)
-#define PHY_COMMON_AUTO_ADV_RES1        (0x4000)
-#define PHY_COMMON_AUTO_ADV_RMT_FLT     (0x2000)
-#define PHY_COMMON_AUTO_ADV_RES2        (0x1000)
-#define PHY_COMMON_AUTO_ADV_AS_PAUSE    (0x0800)
-#define PHY_COMMON_AUTO_ADV_PAUSE       (0x0400)
-#define PHY_COMMON_AUTO_ADV_100BT4      (0x0200)
-#define PHY_COMMON_AUTO_ADV_100BTXFD	(0x0100)
-#define PHY_COMMON_AUTO_ADV_100BTX      (0x0080)
-#define PHY_COMMON_AUTO_ADV_10BTFD	(0x0040)
-#define PHY_COMMON_AUTO_ADV_10BT	(0x0020)
-#define PHY_COMMON_AUTO_ADV_SEL_FLD_MA  (0x001F)
-#define PHY_COMMON_AUTO_ADV_802_9       (0x0002)
-#define PHY_COMMON_AUTO_ADV_802_3       (0x0001)
-
-/* AUTO_LNKB Auto-neg Link Ability Register Bit Fields */
-#define PHY_COMMON_AUTO_LNKB_NP		(0x8000)
-#define PHY_COMMON_AUTO_LNKB_ACK        (0x4000)
-#define PHY_COMMON_AUTO_LNKB_RMT_FLT    (0x2000)
-#define PHY_COMMON_AUTO_LNKB_RES2       (0x1000)
-#define PHY_COMMON_AUTO_LNKB_AS_PAUSE   (0x0800)
-#define PHY_COMMON_AUTO_LNKB_PAUSE      (0x0400)
-#define PHY_COMMON_AUTO_LNKB_100BT4     (0x0200)
-#define PHY_COMMON_AUTO_LNKB_100BTXFD   (0x0100)
-#define PHY_COMMON_AUTO_LNKB_100BTX     (0x0080)
-#define PHY_COMMON_AUTO_LNKB_10BTFD	(0x0040)
-#define PHY_COMMON_AUTO_LNKB_10BT	(0x0020)
-#define PHY_COMMON_AUTO_LNKB_SEL_FLD_MA (0x001F)
-#define PHY_COMMON_AUTO_LNKB_802_9      (0x0002)
-#define PHY_COMMON_AUTO_LNKB_802_3      (0x0001)
-
-/* AUTO_EXP Auto-neg Expansion Register Bit Fields */
-#define PHY_COMMON_AUTO_EXP_RES1        (0xFFC0)
-#define PHY_COMMON_AUTO_EXP_BASE_PAGE   (0x0020)
-#define PHY_COMMON_AUTO_EXP_PAR_DT_FLT  (0x0010)
-#define PHY_COMMON_AUTO_EXP_LNK_NP_CAP  (0x0008)
-#define PHY_COMMON_AUTO_EXP_NP_CAP      (0x0004)
-#define PHY_COMMON_AUTO_EXP_PAGE_REC    (0x0002)
-#define PHY_COMMON_AUTO_EXP_LNK_AN_CAP  (0x0001)
-
-/* AUTO_NEXT Aut-neg Next Page Tx Register Bit Fields */
-#define PHY_COMMON_AUTO_NEXT_NP         (0x8000)
-#define PHY_COMMON_AUTO_NEXT_RES1       (0x4000)
-#define PHY_COMMON_AUTO_NEXT_MSG_PAGE   (0x2000)
-#define PHY_COMMON_AUTO_NEXT_ACK_2      (0x1000)
-#define PHY_COMMON_AUTO_NEXT_TOGGLE     (0x0800)
-#define PHY_COMMON_AUTO_NEXT_MSG        (0x07FF)
-
-/* AUTO_LNKN Auto-neg Link Partner Rx Reg Bit Fields */
-#define PHY_COMMON_AUTO_LNKN_NP         (0x8000)
-#define PHY_COMMON_AUTO_LNKN_ACK        (0x4000)
-#define PHY_COMMON_AUTO_LNKN_MSG_PAGE   (0x2000)
-#define PHY_COMMON_AUTO_LNKN_ACK_2      (0x1000)
-#define PHY_COMMON_AUTO_LNKN_TOGGLE     (0x0800)
-#define PHY_COMMON_AUTO_LNKN_MSG        (0x07FF)
-
 /* PORT_CFG Port Configuration Register Bit Fields */
 #define PHY_LXT971_PORT_CFG_RES1        (0x8000)
 #define PHY_LXT971_PORT_CFG_FORCE_LNK   (0x4000)
diff --git a/include/mmc.h b/include/mmc.h
index a2716959e2c..19c76fe4cd0 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -25,6 +25,30 @@
 #define _MMC_H_
 #include <asm/arch/mmc.h>
 
+/* MMC command numbers */
+#define MMC_CMD_GO_IDLE_STATE		0
+#define MMC_CMD_SEND_OP_COND		1
+#define MMC_CMD_ALL_SEND_CID		2
+#define MMC_CMD_SET_RELATIVE_ADDR	3
+#define MMC_CMD_SET_DSR			4
+#define MMC_CMD_SELECT_CARD		7
+#define MMC_CMD_SEND_CSD		9
+#define MMC_CMD_SEND_CID		10
+#define MMC_CMD_SEND_STATUS		13
+#define MMC_CMD_SET_BLOCKLEN		16
+#define MMC_CMD_READ_SINGLE_BLOCK	17
+#define MMC_CMD_READ_MULTIPLE_BLOCK	18
+#define MMC_CMD_WRITE_BLOCK		24
+#define MMC_CMD_APP_CMD			55
+
+/* SD Card command numbers */
+#define SD_CMD_SEND_RELATIVE_ADDR	3
+#define SD_CMD_SWITCH			6
+#define SD_CMD_SEND_IF_COND		8
+
+#define SD_CMD_APP_SET_BUS_WIDTH	6
+#define SD_CMD_APP_SEND_OP_COND		41
+
 int mmc_init(int verbose);
 int mmc_read(ulong src, uchar *dst, int size);
 int mmc_write(uchar *src, ulong dst, int size);
diff --git a/include/nand.h b/include/nand.h
index 247d3465dbb..e1285cdae97 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -24,6 +24,9 @@
 #ifndef _NAND_H_
 #define _NAND_H_
 
+extern void nand_init(void);
+
+#ifndef CFG_NAND_LEGACY
 #include <linux/mtd/compat.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -32,7 +35,6 @@ typedef struct mtd_info nand_info_t;
 
 extern int nand_curr_device;
 extern nand_info_t nand_info[];
-extern void nand_init(void);
 
 static inline int nand_read(nand_info_t *info, off_t ofs, size_t *len, u_char *buf)
 {
@@ -122,4 +124,5 @@ int nand_get_lock_status(nand_info_t *meminfo, ulong offset);
 void board_nand_select_device(struct nand_chip *nand, int chip);
 #endif
 
+#endif /* !CFG_NAND_LEGACY */
 #endif
diff --git a/include/ns7520_eth.h b/include/ns7520_eth.h
index 123e6f4c2a7..b509697c2f2 100644
--- a/include/ns7520_eth.h
+++ b/include/ns7520_eth.h
@@ -24,6 +24,7 @@
 
 #ifdef CONFIG_DRIVER_NS7520_ETHERNET
 
+#include <miiphy.h>
 #include "lxt971a.h"
 
 /* The port addresses */
diff --git a/include/ns9750_eth.h b/include/ns9750_eth.h
index a6e5889b7b1..80c721b9001 100644
--- a/include/ns9750_eth.h
+++ b/include/ns9750_eth.h
@@ -31,6 +31,7 @@
 
 #ifdef CONFIG_DRIVER_NS9750_ETHERNET
 
+#include <miiphy.h>
 #include "lxt971a.h"
 
 #define	NS9750_ETH_MODULE_BASE		(0xA0600000)
diff --git a/include/pci_ids.h b/include/pci_ids.h
index d0610179115..165456bc8cc 100644
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@@ -1827,6 +1827,7 @@
 #define PCI_DEVICE_ID_INTEL_82545EM_FIBER	0x1011
 #define PCI_DEVICE_ID_INTEL_82546EB_FIBER	0x1012
 #define PCI_DEVICE_ID_INTEL_82540EM_LOM		0x1015
+#define PCI_DEVICE_ID_INTEL_82545GM_COPPER	0x1026
 #define PCI_DEVICE_ID_INTEL_82559		0x1030
 
 #define PCI_DEVICE_ID_INTEL_82562ET	0x1031
diff --git a/include/ppc440.h b/include/ppc440.h
index 62f1680441f..c581f1b468a 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -2471,6 +2471,8 @@
 
 #define AHB_TOP			0xA4
 #define AHB_BOT			0xA5
+#define SDR0_AHB_CFG		0x370
+#define SDR0_USB2HOST_CFG	0x371
 #endif /* CONFIG_460EX || CONFIG_460GT */
 
 #define SDR0_SDCS_SDD			(0x80000000 >> 31)
diff --git a/include/sha256.h b/include/sha256.h
new file mode 100644
index 00000000000..e38ea898c3e
--- /dev/null
+++ b/include/sha256.h
@@ -0,0 +1,16 @@
+#ifndef _SHA256_H
+#define _SHA256_H
+
+#define SHA256_SUM_LEN	32
+
+typedef struct {
+	uint32_t total[2];
+	uint32_t state[8];
+	uint8_t buffer[64];
+} sha256_context;
+
+void sha256_starts(sha256_context * ctx);
+void sha256_update(sha256_context * ctx, uint8_t * input, uint32_t length);
+void sha256_finish(sha256_context * ctx, uint8_t digest[SHA256_SUM_LEN]);
+
+#endif /* _SHA256_H */
diff --git a/include/spi.h b/include/spi.h
index 7744c2e36b0..320e50e5296 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -24,6 +24,15 @@
 #ifndef _SPI_H_
 #define _SPI_H_
 
+/* Controller-specific definitions: */
+
+/* CONFIG_HARD_SPI triggers SPI bus initialization in PowerPC */
+#ifdef CONFIG_MPC8XXX_SPI
+# ifndef CONFIG_HARD_SPI
+#  define CONFIG_HARD_SPI
+# endif
+#endif
+
 /* SPI mode flags */
 #define	SPI_CPHA	0x01			/* clock phase */
 #define	SPI_CPOL	0x02			/* clock polarity */