Merge git://git.denx.de/u-boot-riscv

3 files changed, 73 insertions, 0 deletions

diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index 8d5feb3ac7..d672e8ebe6 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -99,6 +99,10 @@
 #define BOOTEFI_NAME "bootia32.efi"
 #elif defined(CONFIG_X86_RUN_64BIT)
 #define BOOTEFI_NAME "bootx64.efi"
+#elif defined(CONFIG_CPU_RISCV_32)
+#define BOOTEFI_NAME "bootriscv32.efi"
+#elif defined(CONFIG_CPU_RISCV_64)
+#define BOOTEFI_NAME "bootriscv64.efi"
 #endif
 #endif
 
@@ -240,6 +244,7 @@
 
 #if defined(CONFIG_CMD_DHCP)
 #if defined(CONFIG_EFI_LOADER)
+/* http://www.iana.org/assignments/dhcpv6-parameters/dhcpv6-parameters.xml */
 #if defined(CONFIG_ARM64)
 #define BOOTENV_EFI_PXE_ARCH "0xb"
 #define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00011:UNDI:003000"
@@ -250,6 +255,12 @@
 /* Always assume we're running 64bit */
 #define BOOTENV_EFI_PXE_ARCH "0x7"
 #define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00007:UNDI:003000"
+#elif defined(CONFIG_CPU_RISCV_32)
+#define BOOTENV_EFI_PXE_ARCH "0x19"
+#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00025:UNDI:003000"
+#elif defined(CONFIG_CPU_RISCV_64)
+#define BOOTENV_EFI_PXE_ARCH "0x1b"
+#define BOOTENV_EFI_PXE_VCI "PXEClient:Arch:00027:UNDI:003000"
 #else
 #error Please specify an EFI client identifier
 #endif
diff --git a/include/configs/nx25-ae250.h b/include/configs/ax25-ae350.h
index 930cdbd4e4..b1ca5ac11a 100644
--- a/include/configs/nx25-ae250.h
+++ b/include/configs/ax25-ae350.h
@@ -79,6 +79,44 @@
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_0
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE)
 
+/*
+ * FLASH and environment organization
+ */
+
+/* use CFI framework */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
+
+/* support JEDEC */
+#ifdef CONFIG_CFI_FLASH
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT	1
+#endif/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
+#define PHYS_FLASH_1			0x88000000	/* BANK 0 */
+#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ PHYS_FLASH_1, }
+#define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* TO for Flash Erase (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* TO for Flash Write (ms) */
+
+/* max number of memory banks */
+/*
+ * There are 4 banks supported for this Controller,
+ * but we have only 1 bank connected to flash on board
+*/
+#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#endif
+#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
+
+/* max number of sectors on one chip */
+#define CONFIG_FLASH_SECTOR_SIZE	(0x10000*2)
+#define CONFIG_SYS_MAX_FLASH_SECT	512
+
 /* environments */
 #define CONFIG_ENV_SPI_BUS		0
 #define CONFIG_ENV_SPI_CS		0
@@ -104,4 +142,21 @@
 /* Increase max gunzip size */
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)
 
+/* When we use RAM as ENV */
+#define CONFIG_ENV_SIZE 0x2000
+
+/* Enable distro boot */
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+				"kernel_addr_r=0x00080000\0" \
+				"pxefile_addr_r=0x01f00000\0" \
+				"scriptaddr=0x01f00000\0" \
+				"fdt_addr_r=0x02000000\0" \
+				"ramdisk_addr_r=0x02800000\0" \
+				BOOTENV
+
 #endif /* __CONFIG_H */
diff --git a/include/efi_loader.h b/include/efi_loader.h
index 2868ca25ab..ec000658f6 100644
--- a/include/efi_loader.h
+++ b/include/efi_loader.h
@@ -75,6 +75,13 @@ const char *__efi_nesting_dec(void);
 		##__VA_ARGS__); \
 	})
 
+#ifdef CONFIG_SYS_CACHELINE_SIZE
+#define EFI_CACHELINE_SIZE CONFIG_SYS_CACHELINE_SIZE
+#else
+/* Just use the greatest cache flush alignment requirement I'm aware of */
+#define EFI_CACHELINE_SIZE 128
+#endif
+
 extern struct efi_runtime_services efi_runtime_services;
 extern struct efi_system_table systab;