Merge tag 'u-boot-imx-20190101' of git://www.denx.de/git/u-boot-imx

imx for 2019.01

- introduce support for i.MX8M
- fix size limit for Vhybrid / pico boards
- several board fixes
- w1 driver for MX2x / MX5x

6 files changed, 308 insertions, 2 deletions

diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index 71217f07e2..7e7de4dae6 100644
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -109,6 +109,19 @@
 
 #include "mx6_common.h"
 
+#ifdef CONFIG_SPL
+#include "imx6_spl.h"
+/* RiOTboard */
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000
+#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
+#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6dl-riotboard.dtb"
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0 /* offset 69KB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0 /* offset 69KB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* offset 69KB */
+
+#endif
+
 /* 256M RAM (minimum), 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
  * 1M script, 1M pxe and the ramdisk at the end */
 #define MEM_LAYOUT_ENV_SETTINGS \
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
new file mode 100644
index 0000000000..35f81152f2
--- /dev/null
+++ b/include/configs/imx8mq_evk.h
@@ -0,0 +1,252 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __IMX8M_EVK_H
+#define __IMX8M_EVK_H
+
+#include <linux/sizes.h>
+#include <asm/arch/imx-regs.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CSF_SIZE			0x2000 /* 8K region */
+#endif
+
+#define CONFIG_SPL_TEXT_BASE		0x7E1000
+#define CONFIG_SPL_MAX_SIZE		(124 * 1024)
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
+
+#ifdef CONFIG_SPL_BUILD
+/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LDSCRIPT		"arch/arm/cpu/armv8/u-boot-spl.lds"
+#define CONFIG_SPL_STACK		0x187FF0
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_BSS_START_ADDR      0x00180000
+#define CONFIG_SPL_BSS_MAX_SIZE        0x2000	/* 8 KB */
+#define CONFIG_SYS_SPL_MALLOC_START    0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000	/* 512 KB */
+#define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+#define CONFIG_MALLOC_F_ADDR		0x182000
+/* For RAW image gives a error info not panic */
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
+#undef CONFIG_DM_MMC
+#undef CONFIG_DM_PMIC
+#undef CONFIG_DM_PMIC_PFUZE100
+
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#endif
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+
+#undef CONFIG_CMD_EXPORTENV
+#undef CONFIG_CMD_IMPORTENV
+#undef CONFIG_CMD_IMLS
+
+#undef CONFIG_CMD_CRC32
+#undef CONFIG_BOOTM_NETBSD
+
+/* ENET Config */
+/* ENET1 */
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_MII
+#define CONFIG_ETHPRIME                 "FEC"
+
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_XCV_TYPE             RGMII
+#define CONFIG_FEC_MXC_PHYADDR          0
+#define FEC_QUIRK_ENET_MAC
+
+#define CONFIG_PHY_GIGE
+#define IMX_FEC_BASE			0x30BE0000
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+#endif
+
+#define CONFIG_MFG_ENV_SETTINGS \
+	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+		"rdinit=/linuxrc " \
+		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+		"g_mass_storage.iSerialNumber=\"\" "\
+		"clk_ignore_unused "\
+		"\0" \
+	"initrd_addr=0x43800000\0" \
+	"initrd_high=0xffffffff\0" \
+	"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	CONFIG_MFG_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"image=Image\0" \
+	"console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200\0" \
+	"fdt_addr=0x43000000\0"			\
+	"fdt_high=0xffffffffffffffff\0"		\
+	"boot_fdt=try\0" \
+	"fdt_file=fsl-imx8mq-evk.dtb\0" \
+	"initrd_addr=0x43800000\0"		\
+	"initrd_high=0xffffffffffffffff\0" \
+	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcautodetect=yes\0" \
+	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
+	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"booti ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"echo WARN: Cannot load the DT; " \
+			"fi; " \
+		"else " \
+			"echo wait for boot; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console} " \
+		"root=/dev/nfs " \
+		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+	"netboot=echo Booting from net ...; " \
+		"run netargs;  " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${loadaddr} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"booti ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"echo WARN: Cannot load the DT; " \
+			"fi; " \
+		"else " \
+			"booti; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loadimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else booti ${loadaddr} - ${fdt_addr}; fi"
+
+/* Link Definitions */
+#define CONFIG_LOADADDR			0x40480000
+
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE        0x80000
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_OFFSET               (64 * SZ_64K)
+#define CONFIG_ENV_SIZE			0x1000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
+#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		((CONFIG_ENV_SIZE + (2 * 1024)) * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE           0x40000000
+#define PHYS_SDRAM                      0x40000000
+#define PHYS_SDRAM_SIZE			0xC0000000 /* 3GB DDR */
+
+#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
+					(PHYS_SDRAM_SIZE >> 1))
+
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		UART1_BASE_ADDR
+
+/* Monitor Command Prompt */
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT		"u-boot=> "
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_CBSIZE		1024
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_IMX_BOOTAUX
+
+#define CONFIG_CMD_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_FAT
+
+#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_OCOTP
+#define CONFIG_CMD_FUSE
+
+/* I2C Configs */
+#define CONFIG_SYS_I2C_SPEED		  100000
+
+#define CONFIG_OF_SYSTEM_SETUP
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_DM_PMIC
+#endif
+
+#endif
diff --git a/include/configs/pcm058.h b/include/configs/pcm058.h
index 49048c163f..b9bc08b388 100644
--- a/include/configs/pcm058.h
+++ b/include/configs/pcm058.h
@@ -55,6 +55,7 @@
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_ONFI_DETECTION
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
 #endif
 
 /* DMA stuff, needed for GPMI/MXS NAND support */
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 2bc42a04a0..1884c5844d 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -134,7 +134,19 @@
 /* FLASH and environment organization */
 #define CONFIG_ENV_SIZE			SZ_8K
 
-#define CONFIG_ENV_OFFSET			(8 * SZ_64K)
+/* Environment starts at 768k = 768 * 1024 = 786432 */
+#define CONFIG_ENV_OFFSET		786432
+/*
+ * Detect overlap between U-Boot image and environment area in build-time
+ *
+ * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset
+ * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776
+ *
+ * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
+ * write the direct value here
+ */
+#define CONFIG_BOARD_SIZE_LIMIT		715776
+
 #define CONFIG_SYS_FSL_USDHC_NUM		2
 
 #define CONFIG_SYS_MMC_ENV_DEV			0
diff --git a/include/imximage.h b/include/imximage.h
index 6f7ca7f5e3..544babb53a 100644
--- a/include/imximage.h
+++ b/include/imximage.h
@@ -33,6 +33,7 @@
 #define FLASH_OFFSET_NOR	0x1000
 #define FLASH_OFFSET_SATA	FLASH_OFFSET_STANDARD
 #define FLASH_OFFSET_QSPI	0x1000
+#define FLASH_OFFSET_FLEXSPI	0x1000
 
 /* Initial Load Region Size */
 #define FLASH_LOADSIZE_UNDEFINED	0xFFFFFFFF
@@ -48,6 +49,7 @@
 /* Command tags and parameters */
 #define IVT_HEADER_TAG			0xD1
 #define IVT_VERSION			0x40
+#define IVT_VERSION_V3			0x41
 #define DCD_HEADER_TAG			0xD2
 #define DCD_VERSION			0x40
 #define DCD_WRITE_DATA_COMMAND_TAG	0xCC
@@ -71,6 +73,12 @@ enum imximage_cmd {
 	CMD_CHECK_BITS_CLR,
 	CMD_CSF,
 	CMD_PLUGIN,
+	/* Follwoing on i.MX8MQ/MM */
+	CMD_FIT,
+	CMD_SIGNED_HDMI,
+	CMD_LOADER,
+	CMD_SECOND_LOADER,
+	CMD_DDR_FW,
 };
 
 enum imximage_fld_types {
@@ -84,7 +92,8 @@ enum imximage_fld_types {
 enum imximage_version {
 	IMXIMAGE_VER_INVALID = -1,
 	IMXIMAGE_V1 = 1,
-	IMXIMAGE_V2
+	IMXIMAGE_V2,
+	IMXIMAGE_V3
 };
 
 typedef struct {
@@ -177,6 +186,12 @@ typedef struct {
 	} data;
 } imx_header_v2_t;
 
+typedef struct {
+	flash_header_v2_t fhdr;
+	boot_data_t boot_data;
+	uint32_t padding[5];
+} imx_header_v3_t;
+
 /* The header must be aligned to 4k on MX53 for NAND boot */
 struct imx_header {
 	union {
diff --git a/include/spl.h b/include/spl.h
index ff4e6277d3..c82f2fd033 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -118,6 +118,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
 			struct spl_load_info *info, ulong sector, void *fdt);
 
 #define SPL_COPY_PAYLOAD_ONLY	1
+#define SPL_FIT_FOUND		2
 
 /* SPL common functions */
 void preloader_console_init(void);
@@ -353,6 +354,18 @@ void spl_optee_entry(void *arg0, void *arg1, void *arg2, void *arg3);
 void board_return_to_bootrom(void);
 
 /**
+ * board_spl_fit_post_load - allow process images after loading finished
+ *
+ */
+void board_spl_fit_post_load(ulong load_addr, size_t length);
+
+/**
+ * board_spl_fit_size_align - specific size align before processing payload
+ *
+ */
+ulong board_spl_fit_size_align(ulong size);
+
+/**
  * spl_perform_fixups() - arch/board-specific callback before processing
  *                        the boot-payload
  */