summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorJin Zhengxiong <jason@bus.ap.freescale.net>2006-08-23 19:10:44 +0800
committerJon Loeliger <jdl@freescale.com>2006-08-23 10:39:01 -0500
commit4782ac80b02f0d01afd309e2200dd3c7037f2ba4 (patch)
treeb2c1dbf6a73617a5b1e0ff961f0d4e97342e33a2 /include
parentd8ea2acf5f137cae99417df4f573d036ee384668 (diff)
Add AHCI support to u-boot
Add AHCI support in u-boot, enable the sata disk controllers which following the AHCI protocol. Signed-off-by:Jason Jin<jason.jin@freescale.com>
Diffstat (limited to 'include')
-rw-r--r--include/ahci.h190
1 files changed, 190 insertions, 0 deletions
diff --git a/include/ahci.h b/include/ahci.h
new file mode 100644
index 0000000000..80701e298c
--- /dev/null
+++ b/include/ahci.h
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ * Author: Jason Jin<Jason.jin@freescale.com>
+ * Zhang Wei<wei.zhang@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#ifndef _AHCI_H_
+#define _AHCI_H_
+
+#define AHCI_PCI_BAR 0x24
+#define AHCI_MAX_SG 56 /* hardware max is 64K */
+#define AHCI_CMD_SLOT_SZ 32
+#define AHCI_RX_FIS_SZ 256
+#define AHCI_CMD_TBL_HDR 0x80
+#define AHCI_CMD_TBL_CDB 0x40
+#define AHCI_CMD_TBL_SZ AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16)
+#define AHCI_PORT_PRIV_DMA_SZ AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ \
+ + AHCI_RX_FIS_SZ
+#define AHCI_CMD_ATAPI (1 << 5)
+#define AHCI_CMD_WRITE (1 << 6)
+#define AHCI_CMD_PREFETCH (1 << 7)
+#define AHCI_CMD_RESET (1 << 8)
+#define AHCI_CMD_CLR_BUSY (1 << 10)
+
+#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */
+
+/* Global controller registers */
+#define HOST_CAP 0x00 /* host capabilities */
+#define HOST_CTL 0x04 /* global host control */
+#define HOST_IRQ_STAT 0x08 /* interrupt status */
+#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
+#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */
+
+/* HOST_CTL bits */
+#define HOST_RESET (1 << 0) /* reset controller; self-clear */
+#define HOST_IRQ_EN (1 << 1) /* global IRQ enable */
+#define HOST_AHCI_EN (1 << 31) /* AHCI enabled */
+
+/* Registers for each SATA port */
+#define PORT_LST_ADDR 0x00 /* command list DMA addr */
+#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
+#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */
+#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */
+#define PORT_IRQ_STAT 0x10 /* interrupt status */
+#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
+#define PORT_CMD 0x18 /* port command */
+#define PORT_TFDATA 0x20 /* taskfile data */
+#define PORT_SIG 0x24 /* device TF signature */
+#define PORT_CMD_ISSUE 0x38 /* command issue */
+#define PORT_SCR 0x28 /* SATA phy register block */
+#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
+#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */
+#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */
+#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */
+
+/* PORT_IRQ_{STAT,MASK} bits */
+#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */
+#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */
+#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */
+#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */
+#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */
+#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */
+#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */
+#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */
+
+#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */
+#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */
+#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */
+#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */
+#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */
+#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */
+#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */
+#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */
+#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */
+
+#define PORT_IRQ_FATAL PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_ERR \
+ | PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_ERR
+
+#define DEF_PORT_IRQ PORT_IRQ_FATAL | PORT_IRQ_PHYRDY \
+ | PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE \
+ | PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS \
+ | PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS \
+ | PORT_IRQ_D2H_REG_FIS
+
+/* PORT_CMD bits */
+#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */
+#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */
+#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */
+#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */
+#define PORT_CMD_CLO (1 << 3) /* Command list override */
+#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */
+#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */
+#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */
+
+#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */
+#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
+#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */
+
+#define AHCI_MAX_PORTS 32
+
+/* SETFEATURES stuff */
+#define SETFEATURES_XFER 0x03
+#define XFER_UDMA_7 0x47
+#define XFER_UDMA_6 0x46
+#define XFER_UDMA_5 0x45
+#define XFER_UDMA_4 0x44
+#define XFER_UDMA_3 0x43
+#define XFER_UDMA_2 0x42
+#define XFER_UDMA_1 0x41
+#define XFER_UDMA_0 0x40
+#define XFER_MW_DMA_2 0x22
+#define XFER_MW_DMA_1 0x21
+#define XFER_MW_DMA_0 0x20
+#define XFER_SW_DMA_2 0x12
+#define XFER_SW_DMA_1 0x11
+#define XFER_SW_DMA_0 0x10
+#define XFER_PIO_4 0x0C
+#define XFER_PIO_3 0x0B
+#define XFER_PIO_2 0x0A
+#define XFER_PIO_1 0x09
+#define XFER_PIO_0 0x08
+#define XFER_PIO_SLOW 0x00
+
+#define ATA_FLAG_SATA (1 << 3)
+#define ATA_FLAG_NO_LEGACY (1 << 4) /* no legacy mode check */
+#define ATA_FLAG_MMIO (1 << 6) /* use MMIO, not PIO */
+#define ATA_FLAG_SATA_RESET (1 << 7) /* (obsolete) use COMRESET */
+#define ATA_FLAG_PIO_DMA (1 << 8) /* PIO cmds via DMA */
+#define ATA_FLAG_NO_ATAPI (1 << 11) /* No ATAPI support */
+
+struct ahci_cmd_hdr {
+ u32 opts;
+ u32 status;
+ u32 tbl_addr;
+ u32 tbl_addr_hi;
+ u32 reserved[4];
+};
+
+struct ahci_sg {
+ u32 addr;
+ u32 addr_hi;
+ u32 reserved;
+ u32 flags_size;
+};
+
+struct ahci_ioports {
+ u32 cmd_addr;
+ u32 scr_addr;
+ u32 port_mmio;
+ struct ahci_cmd_hdr *cmd_slot;
+ struct ahci_sg *cmd_tbl_sg;
+ u32 cmd_tbl;
+ u32 rx_fis;
+};
+
+struct ahci_probe_ent {
+ pci_dev_t dev;
+ struct ahci_ioports port[AHCI_MAX_PORTS];
+ u32 n_ports;
+ u32 hard_port_no;
+ u32 host_flags;
+ u32 host_set_flags;
+ u32 mmio_base;
+ u32 pio_mask;
+ u32 udma_mask;
+ u32 flags;
+ u32 cap; /* cache of HOST_CAP register */
+ u32 port_map; /* cache of HOST_PORTS_IMPL reg */
+ u32 link_port_map; /*linkup port map*/
+};
+
+#endif