Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

6 files changed, 177 insertions, 83 deletions

diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 10fd478bab..e617868091 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -426,6 +426,7 @@
 /* e500 definitions */
 #define SPRN_L1CFG0	0x203	/* L1 Cache Configuration Register 0 */
 #define SPRN_L1CFG1	0x204	/* L1 Cache Configuration Register 1 */
+#define SPRN_L2CFG0	0x207	/* L2 Cache Configuration Register 0 */
 #define SPRN_L1CSR0	0x3f2	/* L1 Data Cache Control and Status Register 0 */
 #define   L1CSR0_CPE		0x00010000	/* Data Cache Parity Enable */
 #define   L1CSR0_DCFI		0x00000002	/* Data Cache Flash Invalidate */
@@ -434,6 +435,21 @@
 #define   L1CSR1_CPE		0x00010000	/* Instruction Cache Parity Enable */
 #define   L1CSR1_ICFI		0x00000002	/* Instruction Cache Flash Invalidate */
 #define   L1CSR1_ICE		0x00000001	/* Instruction Cache Enable */
+#define SPRN_L1CSR2	0x25e	/* L1 Data Cache Control and Status Register 2 */
+#define SPRN_L2CSR0	0x3f9	/* L2 Data Cache Control and Status Register 0 */
+#define   L2CSR0_L2E		0x80000000	/* L2 Cache Enable */
+#define   L2CSR0_L2PE		0x40000000	/* L2 Cache Parity/ECC Enable */
+#define   L2CSR0_L2WP		0x1c000000	/* L2 I/D Way Partioning */
+#define   L2CSR0_L2CM		0x03000000	/* L2 Cache Coherency Mode */
+#define   L2CSR0_L2FI		0x00200000	/* L2 Cache Flash Invalidate */
+#define   L2CSR0_L2IO		0x00100000	/* L2 Cache Instruction Only */
+#define   L2CSR0_L2DO		0x00010000	/* L2 Cache Data Only */
+#define   L2CSR0_L2REP		0x00003000	/* L2 Line Replacement Algo */
+#define   L2CSR0_L2FL		0x00000800	/* L2 Cache Flush */
+#define   L2CSR0_L2LFC		0x00000400	/* L2 Cache Lock Flash Clear */
+#define   L2CSR0_L2LOA		0x00000080	/* L2 Cache Lock Overflow Allocate */
+#define   L2CSR0_L2LO		0x00000020	/* L2 Cache Lock Overflow */
+#define SPRN_L2CSR1	0x3fa	/* L2 Data Cache Control and Status Register 1 */
 
 #define SPRN_MMUCSR0	0x3f4	/* MMU control and status register 0 */
 #define SPRN_MAS0	0x270	/* MMU Assist Register 0 */
@@ -624,8 +640,12 @@
 #define MCSRR1	SPRN_MCSRR1
 #define L1CSR0	SPRN_L1CSR0
 #define L1CSR1	SPRN_L1CSR1
+#define L1CSR2	SPRN_L1CSR2
 #define L1CFG0	SPRN_L1CFG0
 #define L1CFG1	SPRN_L1CFG1
+#define L2CFG0	SPRN_L2CFG0
+#define L2CSR0	SPRN_L2CSR0
+#define L2CSR1	SPRN_L2CSR1
 #define MCSR	SPRN_MCSR
 #define MMUCSR0	SPRN_MMUCSR0
 #define BUCSR	SPRN_BUCSR
@@ -885,6 +905,15 @@
 /* Some parts define SVR[0:23] as the SOC version */
 #define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFFFFF)	/* SOC Version fields */
 
+/* whether MPC8xxxE (i.e. has SEC) */
+#if defined(CONFIG_MPC85xx)
+#define IS_E_PROCESSOR(svr)	(svr & 0x80000)
+#else
+#if defined(CONFIG_MPC83XX)
+#define IS_E_PROCESSOR(spridr)	(!(spridr & 0x00010000))
+#endif
+#endif
+
 /*
  * SVR_SOC_VER() Version Values
  */
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 669f4d7c8b..091fd2e870 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -148,8 +148,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CFG_BOOT_BLOCK		0xfc000000	/* boot TLB */
 
-#define CFG_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable */
-
 #define CFG_FLASH_BASE		0xff800000	/* start of FLASH 8M */
 
 #define CFG_BR0_PRELIM		0xff801001
@@ -158,10 +156,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CFG_OR0_PRELIM		0xff806e65
 #define CFG_OR1_PRELIM		0xff806e65
 
-#define CFG_FLASH_BANKS_LIST	{0xfe800000,CFG_FLASH_BASE}
+#define CFG_FLASH_BANKS_LIST	{CFG_FLASH_BASE}
 
 #define CFG_FLASH_QUIET_TEST
-#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
 #define CFG_MAX_FLASH_SECT	128		/* sectors per device */
 #undef	CFG_FLASH_CHECKSUM
 #define CFG_FLASH_ERASE_TOUT	60000		/* Flash Erase Timeout (ms) */
@@ -203,30 +201,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 
 /* define to use L1 as initial stack */
-#define CONFIG_L1_INIT_RAM	1
-#define CFG_INIT_L1_LOCK	1
-#define CFG_INIT_L1_ADDR	0xf4010000	/* Initial L1 address */
-#define CFG_INIT_L1_END		0x00004000	/* End of used area in RAM */
-
-/* define to use L2SRAM as initial stack */
-#undef CONFIG_L2_INIT_RAM
-#define CFG_INIT_L2_ADDR	0xf8fc0000
-#define CFG_INIT_L2_END		0x00040000	/* End of used area in RAM */
-
-#ifdef CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_ADDR	CFG_INIT_L1_ADDR
-#define CFG_INIT_RAM_END	CFG_INIT_L1_END
-#else
-#define CFG_INIT_RAM_ADDR	CFG_INIT_L2_ADDR
-#define CFG_INIT_RAM_END	CFG_INIT_L2_END
-#endif
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK      1
+#define CFG_INIT_RAM_ADDR      0xf4010000      /* Initial L1 address */
+#define CFG_INIT_RAM_END       0x00004000      /* End of used area in RAM */
+
 
 #define CFG_GBL_DATA_SIZE	128	/* num bytes initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
 #define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
+#define CFG_MALLOC_LEN		(1024 * 1024)	/* Reserved for malloc */
 
 /* Serial Port - controlled on board with jumper J8
  * open - index 2
@@ -314,6 +300,26 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_PCI)
 
+/*PCIE video card used*/
+#define VIDEO_IO_OFFSET		CFG_PCIE2_IO_PHYS
+
+/*PCI video card used*/
+/*#define VIDEO_IO_OFFSET	CFG_PCI1_IO_PHYS*/
+
+/* video */
+#define CONFIG_VIDEO
+
+#if defined(CONFIG_VIDEO)
+#define CONFIG_BIOSEMU
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_ATI_RADEON_FB
+#define CONFIG_VIDEO_LOGO
+/*#define CONFIG_CONSOLE_CURSOR*/
+#define CFG_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
+#endif
+
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
@@ -382,7 +388,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #if CFG_MONITOR_BASE > 0xfff80000
 #define CFG_ENV_ADDR		0xfff80000
 #else
-#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x70000)
 #endif
 #define CFG_ENV_SIZE		0x2000
 #define CFG_ENV_SECT_SIZE	0x10000 /* 64K (one sector) */
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index edf8525179..2721216272 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -538,29 +538,29 @@
 #define CONFIG_BAUDRATE	115200
 
 #define	CONFIG_EXTRA_ENV_SETTINGS				        \
-   "netdev=eth0\0"                                                      \
-   "consoledev=ttyCPM\0"						\
-   "ramdiskaddr=1000000\0"						\
-   "ramdiskfile=your.ramdisk.u-boot\0"					\
-   "fdtaddr=400000\0"							\
-   "fdtfile=mpc8560ads.dtb\0"
+	"netdev=eth0\0"							\
+	"consoledev=ttyCPM\0"						\
+	"ramdiskaddr=1000000\0"						\
+	"ramdiskfile=your.ramdisk.u-boot\0"				\
+	"fdtaddr=400000\0"						\
+	"fdtfile=mpc8560ads.dtb\0"
 
 #define CONFIG_NFSBOOTCOMMAND	                                        \
-   "setenv bootargs root=/dev/nfs rw "                                  \
-      "nfsroot=$serverip:$rootpath "                                    \
-      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-      "console=$consoledev,$baudrate $othbootargs;"                     \
-   "tftp $loadaddr $bootfile;"                                          \
-   "tftp $fdtaddr $fdtfile;"						\
-   "bootm $loadaddr - $fdtaddr"
+	"setenv bootargs root=/dev/nfs rw "				\
+		"nfsroot=$serverip:$rootpath "				\
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+		"console=$consoledev,$baudrate $othbootargs;"		\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr - $fdtaddr"
 
 #define CONFIG_RAMBOOTCOMMAND \
-   "setenv bootargs root=/dev/ram rw "                                  \
-      "console=$consoledev,$baudrate $othbootargs;"                     \
-   "tftp $ramdiskaddr $ramdiskfile;"                                    \
-   "tftp $loadaddr $bootfile;"                                          \
-   "tftp $fdtaddr $fdtfile;"						\
-   "bootm $loadaddr $ramdiskaddr $fdtaddr"
+	"setenv bootargs root=/dev/ram rw "				\
+		"console=$consoledev,$baudrate $othbootargs;"		\
+	"tftp $ramdiskaddr $ramdiskfile;"				\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
 
 #define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
 
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index 146eafe9cc..6345cce635 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -24,8 +24,8 @@
  * MA 02111-1307 USA
  */
 
-/* mpc8560ads board configuration file */
-/* please refer to doc/README.mpc85xx for more info */
+/* sbc8560 board configuration file */
+/* please refer to doc/README.sbc8560 for more info */
 /* make sure you change the MAC address and other network params first,
  * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
  */
@@ -102,11 +102,11 @@
 #define CFG_SDRAM_SIZE		512		/* DDR is 512MB */
 #define SPD_EEPROM_ADDRESS	0x55		/*  DDR DIMM */
 
-#undef  CONFIG_DDR_ECC				/* only for ECC DDR module	*/
-#undef  CONFIG_SPD_EEPROM			/* Use SPD EEPROM for DDR setup */
+#undef  CONFIG_DDR_ECC			/* only for ECC DDR module	*/
+#undef  CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
 
 #if defined(CONFIG_MPC85xx_REV1)
-  #define CONFIG_DDR_DLL			/* possible DLL fix needed	*/
+  #define CONFIG_DDR_DLL		/* possible DLL fix needed	*/
 #endif
 
 #undef CONFIG_CLOCKS_IN_MHZ
@@ -177,8 +177,8 @@
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
-#undef  CONFIG_CONS_ON_SCC			/* define if console on SCC */
-#undef	CONFIG_CONS_NONE			/* define if console on something else */
+#undef  CONFIG_CONS_ON_SCC	/* define if console on SCC */
+#undef	CONFIG_CONS_NONE	/* define if console on something else */
 
 #define CONFIG_CONS_INDEX	1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
@@ -200,6 +200,11 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT                1
+#define CONFIG_OF_BOARD_SETUP           1
+#define CONFIG_OF_STDOUT_VIA_ALIAS      1
+
 /*
  * I2C
  */
@@ -215,16 +220,28 @@
 #define CFG_PCI_MEM_PHYS	0xC0000000
 #define CFG_PCI_MEM_SIZE	0x10000000
 
-#if defined(CONFIG_TSEC_ENET)		/* TSEC Ethernet port */
+#ifdef CONFIG_TSEC_ENET
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 	1
+#endif
 
-#  define CONFIG_NET_MULTI	1
-#  define CONFIG_MII		1	/* MII PHY management		*/
-#  define CONFIG_MPC85xx_TSEC1
-#  define CONFIG_MPC85xx_TSEC1_NAME	"TSEC0"
-#  define TSEC1_PHY_ADDR	25
-#  define TSEC1_PHYIDX		0
-/* Options are: TSEC0 */
-#  define CONFIG_ETHPRIME		"TSEC0"
+#ifndef CONFIG_MII
+#define CONFIG_MII		1	/* MII PHY management */
+#endif
+#define CONFIG_TSEC1	1
+#define CONFIG_TSEC1_NAME	"TSEC0"
+#define CONFIG_TSEC2	1
+#define CONFIG_TSEC2_NAME	"TSEC1"
+#define TSEC1_PHY_ADDR		0x19
+#define TSEC2_PHY_ADDR		0x1a
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define TSEC1_FLAGS		TSEC_GIGABIT
+#define TSEC2_FLAGS		TSEC_GIGABIT
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME		"TSEC0"
 
 #elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
 
@@ -272,20 +289,20 @@
  * FLASH and environment organization
  */
 
-#define CFG_FLASH_CFI		1	/* Flash is CFI conformant		*/
-#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver		*/
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant	*/
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver	*/
 #if 0
-#define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
-#define CFG_FLASH_PROTECTION		/* use hardware protection		*/
+#define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)   */
+#define CFG_FLASH_PROTECTION		/* use hardware protection	*/
 #endif
-#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
-#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	64	/* max number of sectors on one chip */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
 
 #undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT	200000		/* Timeout for Flash Erase (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	50000		/* Timeout for Flash Write (in ms)	*/
+#define CFG_FLASH_ERASE_TOUT	200000	/* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT	50000	/* Timeout for Flash Write (in ms) */
 
-#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor	*/
+#define CFG_MONITOR_BASE	TEXT_BASE /* start of monitor	*/
 
 #if 0
 /* XXX This doesn't work and I don't want to fix it */
@@ -315,9 +332,8 @@
   #define CFG_ENV_SIZE		0x2000
 #endif
 
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
+#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600"
 /*#define CONFIG_BOOTARGS      "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
 #define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
@@ -389,25 +405,57 @@
 #define BOOTFLAG_WARM	0x02		/* Software reboot		*/
 
 #if defined(CONFIG_CMD_KGDB)
-  #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-  #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
-/*Note: change below for your network setting!!! */
 #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-#  define CONFIG_ETHADDR	00:01:af:07:9b:8a
-#  define CONFIG_HAS_ETH1
-#  define CONFIG_ETH1ADDR	00:01:af:07:9b:8b
-#  define CONFIG_HAS_ETH2
-#  define CONFIG_ETH2ADDR	00:01:af:07:9b:8c
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
 #endif
 
-#define CONFIG_SERVERIP		192.168.0.131
-#define CONFIG_IPADDR		192.168.0.105
-#define CONFIG_GATEWAYIP	0.0.0.0
-#define CONFIG_NETMASK		255.255.255.0
+/* You can compile in a MAC address and your custom net settings by using
+ * the following syntax.  Your board should be marked with the assigned
+ * MAC addresses directly on it.
+ *
+ * #define CONFIG_ETHADDR		de:ad:be:ef:00:00
+ * #define CONFIG_ETH1ADDR		fa:ke:ad:dr:es:s!
+ * #define CONFIG_SERVERIP		<server ip>
+ * #define CONFIG_IPADDR		<board ip>
+ * #define CONFIG_GATEWAYIP		<gateway ip>
+ * #define CONFIG_NETMASK		<your netmask>
+ */
+
 #define CONFIG_HOSTNAME		SBC8560
 #define CONFIG_ROOTPATH		/home/ppc
-#define CONFIG_BOOTFILE		pImage
+#define CONFIG_BOOTFILE		uImage
+
+#define	CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"consoledev=ttyS0\0"				\
+	"ramdiskaddr=2000000\0"			\
+	"ramdiskfile=ramdisk.uboot\0"			\
+	"fdtaddr=c00000\0"				\
+	"fdtfile=sbc8560.dtb\0"
+
+#define CONFIG_NFSBOOTCOMMAND						\
+	"setenv bootargs root=/dev/nfs rw "				\
+		"nfsroot=$serverip:$rootpath "				\
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+		"console=$consoledev,$baudrate $othbootargs;"		\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr - $fdtaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+	"setenv bootargs root=/dev/ram rw "				\
+		"console=$consoledev,$baudrate $othbootargs;"		\
+	"tftp $ramdiskaddr $ramdiskfile;"				\
+	"tftp $loadaddr $bootfile;"					\
+	"tftp $fdtaddr $fdtfile;"					\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND	CONFIG_NFSBOOTCOMMAND
 
 #endif	/* __CONFIG_H */
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 890993ff9d..a7c6326e12 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -56,6 +56,12 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd);
 static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {}
 #endif /* CONFIG_HAS_FSL_DR_USB */
 
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83XX)
+void fdt_fixup_crypto_node(void *blob, int sec_rev);
+#else
+static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {}
+#endif
+
 #ifdef CONFIG_OF_BOARD_SETUP
 void ft_board_setup(void *blob, bd_t *bd);
 void ft_cpu_setup(void *blob, bd_t *bd);
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 939b82541a..897ecd6bc9 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -61,21 +61,26 @@
 #endif
 
 #define PARTID_NO_E(spridr)		((spridr & 0xFFFE0000) >> 16)
-#define IS_E_PROCESSOR(spridr)		(!(spridr & 0x00010000)) /* has SEC */
+#define SPR_FAMILY(spridr)		((spridr & 0xFFF00000) >> 20)
 
+#define SPR_831X_FAMILY			0x80B
 #define SPR_8311			0x80B2
 #define SPR_8313			0x80B0
 #define SPR_8314			0x80B6
 #define SPR_8315			0x80B4
+#define SPR_832X_FAMILY			0x806
 #define SPR_8321			0x8066
 #define SPR_8323			0x8062
+#define SPR_834X_FAMILY			0x803
 #define SPR_8343			0x8036
 #define SPR_8347_TBGA_			0x8032
 #define SPR_8347_PBGA_			0x8034
 #define SPR_8349			0x8030
+#define SPR_836X_FAMILY			0x804
 #define SPR_8358_TBGA_			0x804A
 #define SPR_8358_PBGA_			0x804E
 #define SPR_8360			0x8048
+#define SPR_837X_FAMILY			0x80C
 #define SPR_8377			0x80C6
 #define SPR_8378			0x80C4
 #define SPR_8379			0x80C2