Merge branch 'master' of git://git.denx.de/u-boot

21 files changed, 144 insertions, 66 deletions

diff --git a/include/ahci.h b/include/ahci.h
index 6d917121c67..0bdedac187a 100644
--- a/include/ahci.h
+++ b/include/ahci.h
@@ -135,12 +135,12 @@ struct ahci_sg {
 };
 
 struct ahci_ioports {
-	u32	cmd_addr;
-	u32	scr_addr;
-	u32	port_mmio;
+	void __iomem	*cmd_addr;
+	void __iomem	*scr_addr;
+	void __iomem	*port_mmio;
 	struct ahci_cmd_hdr	*cmd_slot;
 	struct ahci_sg		*cmd_tbl_sg;
-	u32	cmd_tbl;
+	ulong	cmd_tbl;
 	u32	rx_fis;
 };
 
diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h
index 6747619b1c7..db0550b67cb 100644
--- a/include/asm-generic/global_data.h
+++ b/include/asm-generic/global_data.h
@@ -93,6 +93,7 @@ typedef struct global_data {
 #endif
 #ifdef CONFIG_PCI
 	struct pci_controller *hose;	/* PCI hose for early use */
+	phys_addr_t pci_ram_top;	/* top of region accessible to PCI */
 #endif
 #ifdef CONFIG_PCI_BOOTDELAY
 	int pcidelay_done;
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 2f4117db295..6a0240b9038 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -19,6 +19,7 @@
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP3_AM3517CRANE	1	/* working with CRANEBOARD */
 #define CONFIG_OMAP_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
 /* Common ARM Erratas */
 #define CONFIG_ARM_ERRATA_454179
 #define CONFIG_ARM_ERRATA_430973
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index e5b462174ee..b90a60db0fe 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -19,6 +19,7 @@
 #define CONFIG_OMAP		1	/* in a TI OMAP core */
 #define CONFIG_OMAP3_AM3517EVM	1	/* working with AM3517EVM */
 #define CONFIG_OMAP_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
 /* Common ARM Erratas */
 #define CONFIG_ARM_ERRATA_454179
 #define CONFIG_ARM_ERRATA_430973
diff --git a/include/configs/baltos.h b/include/configs/baltos.h
index 68bfee5e8c2..cce5e4f2857 100644
--- a/include/configs/baltos.h
+++ b/include/configs/baltos.h
@@ -16,6 +16,7 @@
 #ifndef __CONFIG_BALTOS_H
 #define __CONFIG_BALTOS_H
 
+#include <linux/sizes.h>
 #include <configs/ti_am335x_common.h>
 
 #define MACH_TYPE_TIAM335EVM		3589	/* Until the next sync */
@@ -39,8 +40,7 @@
 #define CONFIG_CMD_PART
 
 /* FIT support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
+#define CONFIG_SYS_BOOTM_LEN         SZ_64M
 #define CONFIG_OF_BOARD_SETUP
 
 /* UBI Support */
@@ -54,10 +54,11 @@
 
 /* I2C configuration */
 #undef CONFIG_SYS_OMAP24_I2C_SPEED
-#define CONFIG_SYS_OMAP24_I2C_SPEED 10000
+#define CONFIG_SYS_OMAP24_I2C_SPEED 1000
 
+#undef CONFIG_SPL_OS_BOOT
 #ifdef CONFIG_NAND
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00080000
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_CMD_SPL_NAND_OFS 0x00080000 /* os parameters */
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 /* kernel offset */
@@ -80,7 +81,9 @@
 		"ubifsmount ubi0:kernel; " \
 		"ubifsload $loadaddr kernel-fit.itb;" \
 		"ubifsumount; " \
-		"bootm ${loadaddr}#conf${board_name}\0"
+		"bootm ${loadaddr}#conf${board_name}; " \
+		"if test $? -ne 0; then echo Using default FIT config; " \
+		"bootm ${loadaddr}; fi;\0"
 #else
 #define NANDARGS ""
 #endif
@@ -236,6 +239,7 @@
 
 #ifdef CONFIG_NAND
 #define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_NAND_OMAP_GPMC_PREFETCH
 #define CONFIG_NAND_OMAP_ELM
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
@@ -278,9 +282,9 @@
 #define CONFIG_USB_GADGET_VBUS_DRAW	2
 #define CONFIG_MUSB_HOST
 #define CONFIG_AM335X_USB0
-#define CONFIG_AM335X_USB0_MODE	MUSB_PERIPHERAL
+#define CONFIG_AM335X_USB0_MODE	MUSB_HOST
 #define CONFIG_AM335X_USB1
-#define CONFIG_AM335X_USB1_MODE MUSB_HOST
+#define CONFIG_AM335X_USB1_MODE MUSB_OTG
 
 #ifdef CONFIG_MUSB_HOST
 #define CONFIG_CMD_USB
diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h
index 0e1f0467c78..6cf53a3e42a 100644
--- a/include/configs/crownbay.h
+++ b/include/configs/crownbay.h
@@ -32,15 +32,16 @@
 #define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE		0xe000
 
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 #define CONFIG_SYS_EARLY_PCI_INIT
 #define CONFIG_PCI_PNP
 #define CONFIG_E1000
 
-#define CONFIG_STD_DEVICES_SETTINGS     "stdin=serial\0" \
-					"stdout=serial\0" \
-					"stderr=serial\0"
+#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,vga,usbkbd\0" \
+					"stdout=serial,vga\0" \
+					"stderr=serial,vga\0"
 
-#define CONFIG_SCSI_DEV_LIST            \
+#define CONFIG_SCSI_DEV_LIST		\
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
 
 #define CONFIG_SPI_FLASH_SST
@@ -55,9 +56,8 @@
 #define CONFIG_PCH_GBE
 #define CONFIG_PHYLIB
 
-/* Video is not supported */
-#undef CONFIG_VIDEO
-#undef CONFIG_CFB_CONSOLE
+/* TunnelCreek IGD support */
+#define CONFIG_VGA_AS_SINGLE_DEVICE
 
 /* Environment configuration */
 #define CONFIG_ENV_SECT_SIZE		0x1000
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index 24dbf6bf713..a429107a9af 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -29,12 +29,19 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_MMC
 #define CONFIG_CMD_PING
+#define CONFIG_CMD_SCSI
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_TFTPPUT
 #define CONFIG_CMD_TIME
+#define CONFIG_CMD_USB
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -48,6 +55,40 @@
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
 #define CONFIG_SPI_FLASH_STMICRO
 
+/*
+ * SDIO/MMC Card Configuration
+ */
+#define CONFIG_MMC
+#define CONFIG_MMC_SDMA
+#define CONFIG_GENERIC_MMC
+#define CONFIG_SDHCI
+#define CONFIG_MV_SDHCI
+#define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE
+
+/*
+ * SATA/SCSI/AHCI configuration
+ */
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+					 CONFIG_SYS_SCSI_MAX_LUN)
+
+/* Partition support */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+
+/* Additional FS support/configuration */
+#define CONFIG_SUPPORT_VFAT
+
+/* USB/EHCI configuration */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI_MARVELL
+#define CONFIG_EHCI_IS_TDI
+
 /* Environment in SPI NOR flash */
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET		(1 << 20) /* 1MiB in */
diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h
index d83e07e2423..a28ceb7064a 100644
--- a/include/configs/k2e_evm.h
+++ b/include/configs/k2e_evm.h
@@ -20,7 +20,7 @@
 #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
 	"addr_mon=0x0c140000\0"						\
 	"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "	\
-	"root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0"		\
+	"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0"	\
 	"name_fdt=uImage-k2e-evm.dtb\0"					\
 	"name_mon=skern-k2e-evm.bin\0"					\
 	"name_ubi=k2e-evm-ubifs.ubi\0"					\
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index ffddf1391c4..eae77217833 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -20,7 +20,7 @@
 #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
 	"addr_mon=0x0c5f0000\0"						\
 	"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "	\
-	"root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0"		\
+	"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0"	\
 	"name_fdt=uImage-k2hk-evm.dtb\0"				\
 	"name_mon=skern-k2hk-evm.bin\0"					\
 	"name_ubi=k2hk-evm-ubifs.ubi\0"					\
diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h
index 805164a679d..57da0579255 100644
--- a/include/configs/k2l_evm.h
+++ b/include/configs/k2l_evm.h
@@ -20,7 +20,7 @@
 #define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS				\
 	"addr_mon=0x0c140000\0"						\
 	"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "	\
-	"root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0"		\
+	"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,4096\0"	\
 	"name_fdt=uImage-k2l-evm.dtb\0"					\
 	"name_mon=skern-k2l-evm.bin\0"					\
 	"name_ubi=k2l-evm-ubifs.ubi\0"					\
diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h
index 547765d1376..af36ac5cafe 100644
--- a/include/configs/minnowmax.h
+++ b/include/configs/minnowmax.h
@@ -32,6 +32,7 @@
 #define CONFIG_PCI_IO_PHYS		CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE		0xe000
 
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 #define CONFIG_SYS_EARLY_PCI_INIT
 #define CONFIG_PCI_PNP
 #define CONFIG_RTL8169
@@ -52,9 +53,6 @@
 #undef CONFIG_USB_MAX_CONTROLLER_COUNT
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		1
 
-#define CONFIG_X86_OPTION_ROM_FILE		vga.bin
-#define CONFIG_X86_OPTION_ROM_ADDR		0xfff90000
-
 #define VIDEO_IO_OFFSET				0
 #define CONFIG_X86EMU_RAW_IO
 #define CONFIG_VGA_AS_SINGLE_DEVICE
@@ -65,8 +63,7 @@
 /* Avoid a warning in the Realtek Ethernet driver */
 #define CONFIG_SYS_CACHELINE_SIZE 16
 
-/* Environment in SPI flash is unsupported for now */
-#undef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SECT_SIZE		0x1000
+#define CONFIG_ENV_OFFSET		0x007fe000
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 0f325944b53..e5fd147f0d3 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -480,7 +480,7 @@
 
 /*
  * Variant 2 partition layout
- * chip-size = 256MiB
+ * chip-size = 256MiB or 512 MiB
  *|         name |        size |           address area |
  *-------------------------------------------------------
  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
@@ -490,23 +490,23 @@
  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
- *|       rootfs | 148.000 MiB | 0x  360000..0x 975ffff |
- *|      mtdoops | 512.000 KiB | 0x 9760000..0x 98Dffff |
- *|configuration | 104.125 MiB | 0x 97E0000..0x fffffff |
+ *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
+ *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
+ *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
  *-------------------------------------------------------
  */
 
 #define MTDPARTS_DEFAULT_V2	"mtdparts=" MTDIDS_NAME_STR ":" \
-					"128k(spl),"		\
-					"128k(spl.backup1),"	\
-					"128k(spl.backup2),"	\
-					"128k(spl.backup3),"	\
-					"1920k(u-boot),"	\
-					"512k(u-boot.env0),"	\
-					"512k(u-boot.env1),"	\
-					"148m(rootfs),"		\
-					"512k(mtdoops),"	\
-					"-(configuration)"
+					"128k(spl)," \
+					"128k(spl.backup1)," \
+					"128k(spl.backup2)," \
+					"128k(spl.backup3)," \
+					"1920k(u-boot)," \
+					"512k(u-boot.env0)," \
+					"512k(u-boot.env1)," \
+					"512k(mtdoops)," \
+					"-(rootfs)"
+
 
 #define DFU_ALT_INFO_NAND_V2 \
 	"spl part 0 1;" \
@@ -516,8 +516,7 @@
 	"u-boot part 0 5;" \
 	"u-boot.env0 part 0 6;" \
 	"u-boot.env1 part 0 7;" \
-	"rootfs partubi 0 8;" \
-	"configuration partubi 0 10"
+	"rootfs partubi 0 9" \
 
 #define CONFIG_ENV_SETTINGS_NAND_V2 \
 	"nand_active_ubi_vol=rootfs_a\0" \
@@ -534,7 +533,7 @@
 			"setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 		"fi;" \
 		"setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
-		"ubi.mtd=7,2048 ubi.mtd=9,2048;" \
+		"ubi.mtd=rootfs,2048;" \
 		"setenv bootargs ${bootargs} " \
 		"root=${nand_root} noinitrd ${mtdparts} " \
 		"rootfstype=${nand_root_fs_type} ip=${ip_method} " \
diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h
index 46869dd47f5..1b4fd213cf4 100644
--- a/include/configs/stm32f429-discovery.h
+++ b/include/configs/stm32f429-discovery.h
@@ -52,10 +52,10 @@
 #define CONFIG_STM32_SERIAL
 /*
  * Configuration of the USART
- * 1:   TX:PA9  PX:PA10
+ * 1:   TX:PA9  RX:PA10
  * 2:   TX:PD5  RX:PD6
  * 3:   TX:PC10 RX:PC11
- * 6:   TX:PC6  RX:PC7
+ * 6:   TX:PG14 RX:PG9
  */
 #define CONFIG_STM32_USART		1
 
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index 6379fd3ab7d..887f31a84d1 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -23,7 +23,9 @@
 #define PHYS_SDRAM_1_SIZE			0x00198000
 
 #define CONFIG_ENV_SIZE				0x10000
-#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SECT_SIZE			CONFIG_ENV_SIZE
+#define CONFIG_ENV_OFFSET			0x30000
 #define CONFIG_ENV_ADDR				\
 	(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
 #define CONFIG_SYS_MAXARGS			16
@@ -72,7 +74,20 @@
 #define CONFIG_BOOTDELAY                       3
 #define CONFIG_BOOTCOMMAND                     "go 0x40040000"
 
-#define CONFIG_OF_SEPARATE
-#define CONFIG_OF_CONTROL
 #define CONFIG_OF_LIBFDT
+
+/*
++ * QSPI support
++ */
+#ifdef CONFIG_OF_CONTROL		/* QSPI is controlled via DT */
+#define CONFIG_CADENCE_QSPI
+#define CONFIG_CQSPI_DECODER		0
+#define CONFIG_CQSPI_REF_CLK		((30/4)/2)*1000*1000
+#define CONFIG_CMD_SPI
+
+#define CONFIG_SPI_FLASH_STMICRO	/* Micron/Numonyx flash */
+#define CONFIG_SPI_FLASH_WINBOND	/* WINBOND */
+#define CONFIG_CMD_SF
+#endif
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/x86-chromebook.h b/include/configs/x86-chromebook.h
index e0e7fca9f86..408cbb19577 100644
--- a/include/configs/x86-chromebook.h
+++ b/include/configs/x86-chromebook.h
@@ -26,9 +26,6 @@
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}, \
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_AHCI}
 
-#define CONFIG_X86_OPTION_ROM_FILE		pci8086,0166.bin
-#define CONFIG_X86_OPTION_ROM_ADDR		0xfff90000
-
 #define CONFIG_PCI_MEM_BUS	0xe0000000
 #define CONFIG_PCI_MEM_PHYS	CONFIG_PCI_MEM_BUS
 #define CONFIG_PCI_MEM_SIZE	0x10000000
diff --git a/include/cpu.h b/include/cpu.h
index 34c60bcbaa1..bfb0db2e2c6 100644
--- a/include/cpu.h
+++ b/include/cpu.h
@@ -58,6 +58,14 @@ struct cpu_ops {
 	 * @return 0 if OK, -ve on error
 	 */
 	int (*get_info)(struct udevice *dev, struct cpu_info *info);
+
+	/**
+	 * get_count() - Get number of CPUs
+	 *
+	 * @dev:	Device to check (UCLASS_CPU)
+	 * @return CPU count if OK, -ve on error
+	 */
+	int (*get_count)(struct udevice *dev);
 };
 
 #define cpu_get_ops(dev)        ((struct cpu_ops *)(dev)->driver->ops)
@@ -81,4 +89,12 @@ int cpu_get_desc(struct udevice *dev, char *buf, int size);
  */
 int cpu_get_info(struct udevice *dev, struct cpu_info *info);
 
+/**
+ * cpu_get_count() - Get number of CPUs
+ *
+ * @dev:	Device to check (UCLASS_CPU)
+ * @return CPU count if OK, -ve on error
+ */
+int cpu_get_count(struct udevice *dev);
+
 #endif
diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h
index edbd250809c..1dd7636a696 100644
--- a/include/dt-bindings/pinctrl/omap.h
+++ b/include/dt-bindings/pinctrl/omap.h
@@ -3,6 +3,8 @@
  *
  * Copyright (C) 2009 Nokia
  * Copyright (C) 2009-2010 Texas Instruments
+ *
+ * SPDX-License-Identifier:	GPL-2.0
  */
 
 #ifndef _DT_BINDINGS_PINCTRL_OMAP_H
diff --git a/include/env_callback.h b/include/env_callback.h
index ab5d42dd813..90b95b5e667 100644
--- a/include/env_callback.h
+++ b/include/env_callback.h
@@ -33,8 +33,10 @@
 
 #ifdef CONFIG_REGEX
 #define ENV_DOT_ESCAPE "\\"
+#define ETHADDR_WILDCARD "\\d?"
 #else
 #define ENV_DOT_ESCAPE
+#define ETHADDR_WILDCARD
 #endif
 
 #ifdef CONFIG_CMD_DNS
@@ -53,7 +55,7 @@
 	"nvlan:nvlan," \
 	"vlan:vlan," \
 	DNS_CALLBACK \
-	"eth\\d?addr:ethaddr,"
+	"eth" ETHADDR_WILDCARD "addr:ethaddr,"
 #else
 #define NET_CALLBACKS
 #endif
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 33669da4ed8..552d4d623ff 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -484,8 +484,9 @@ int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
 int del_mtd_partitions(struct mtd_info *);
 
 int mtd_arg_off(const char *arg, int *idx, loff_t *off, loff_t *size,
-		loff_t *maxsize, int devtype, int chipsize);
+		loff_t *maxsize, int devtype, uint64_t chipsize);
 int mtd_arg_off_size(int argc, char *const argv[], int *idx, loff_t *off,
-		 loff_t *size, loff_t *maxsize, int devtype, int chipsize);
+		     loff_t *size, loff_t *maxsize, int devtype,
+		     uint64_t chipsize);
 #endif
 #endif /* __MTD_MTD_H__ */
diff --git a/include/pci.h b/include/pci.h
index 07b1e9a4f54..542e68bceb9 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -513,6 +513,16 @@ struct pci_controller {
 
 	int indirect_type;
 
+	/*
+	 * TODO(sjg@chromium.org): With driver model we use struct
+	 * pci_controller for both the controller and any bridge devices
+	 * attached to it. But there is only one region list and it is in the
+	 * top-level controller.
+	 *
+	 * This could be changed so that struct pci_controller is only used
+	 * for PCI controllers and a separate UCLASS (or perhaps
+	 * UCLASS_PCI_GENERIC) is used for bridges.
+	 */
 	struct pci_region regions[MAX_PCI_REGIONS];
 	int region_count;
 
@@ -712,15 +722,6 @@ void pci_write_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum,
 u32 pci_read_bar32(struct pci_controller *hose, pci_dev_t dev, int barnum);
 
 /**
- * pciauto_setup_rom() - Set up access to a device ROM
- *
- * @hose:	PCI hose to use
- * @dev:	PCI device to adjust
- * @return 0 if done, -ve on error
- */
-int pciauto_setup_rom(struct pci_controller *hose, pci_dev_t dev);
-
-/**
  * pci_hose_find_devices() - Find devices by vendor/device ID
  *
  * @hose:	PCI hose to search
diff --git a/include/vbe.h b/include/vbe.h
index c5deee9eca9..1a86db886ad 100644
--- a/include/vbe.h
+++ b/include/vbe.h
@@ -12,7 +12,7 @@
 #define _VBE_H
 
 /* these structs are for input from and output to OF */
-struct __packed screen_info {
+struct __packed vbe_screen_info {
 	u8 display_type;	/* 0=NONE, 1= analog, 2=digital */
 	u16 screen_width;
 	u16 screen_height;
@@ -23,7 +23,7 @@ struct __packed screen_info {
 	u8 edid_block_zero[128];
 };
 
-struct __packed screen_info_input {
+struct __packed vbe_screen_info_input {
 	u8 signature[4];
 	u16 size_reserved;
 	u8 monitor_number;