ARM: remove broken "evb4510" board.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Curt Brune <curt@cucy.com>

1 files changed, 0 insertions, 180 deletions

diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
deleted file mode 100644
index 23a2efa846b..00000000000
--- a/include/configs/evb4510.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * Configuation settings for evb4510 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start u-boot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- *
- * Also swap the flash1 and flash2 addresses during debug.
- *
- * #define CONFIG_SKIP_LOWLEVEL_INIT
- */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7		1	/* This is a ARM7 CPU	 */
-#define CONFIG_ARM_THUMB	1	/* this is an ARM7TDMI	 */
-#define CONFIG_S3C4510B		1	/* it's a S3C4510B chip	 */
-#define CONFIG_EVB4510		1	/* on an EVB4510 Board	 */
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ    (4*1024)
-#define CONFIG_STACKSIZE_FIQ    (4*1024)
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_S3C4510_ETH   1
-#define CONFIG_DRIVER_S3C4510_I2C   1
-#define CONFIG_DRIVER_S3C4510_UART  1
-#define CONFIG_DRIVER_S3C4510_FLASH 1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1		1	/* we use Serial line 1, could also use 2 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		19200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_ETHADDR		00:40:95:36:35:33
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		10.0.0.11
-#define CONFIG_SERVERIP		10.0.0.1
-#define CONFIG_CMDLINE_TAG	/* submit bootargs to kernel */
-
-#define CONFIG_BOOTDELAY	2
-#define CONFIG_BOOTCOMMAND	"tftp 100000 uImage"
-/* #define CONFIG_BOOTARGS	"console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	19200		/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory */
-#define CONFIG_SYS_PROMPT		"evb4510 # "	/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
-
-#define CONFIG_CMDLINE_TAG                      /* allow passing of command line args to linux */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#define CONFIG_SYS_MEMTEST_START	0x00000000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x00780000	/* 4 ... 8 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x00000000	/* default load address */
-
-#define CONFIG_SYS_SYS_CLK_FREQ	50000000	/* CPU freq: 50 MHz */
-#define CONFIG_SYS_HZ			1000		/* decrementer freq: 1 KHz */
-
-						/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
-*/
-#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map after relocation
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 banks of DRAM */
-#define PHYS_SDRAM_1		0x00000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x00800000 /* 8 MB */
-
-#define PHYS_FLASH_1		0x01000000 /* Flash Bank #1 */
-#define PHYS_FLASH_1_SIZE	0x00200000 /* 2 MB (one chip, 8bit access) */
-
-#define PHYS_FLASH_2		0x02000000 /* Flash Bank #2 */
-#define PHYS_FLASH_2_SIZE	0x00080000 /* 512KB (one chip, 8bit access) */
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_SIZE		PHYS_FLASH_1_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
-#define CONFIG_SYS_MAIN_SECT_SIZE	0x00010000  /* main size of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(4*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* environment settings */
-#define CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_NOWHERE
-
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x20000) /* environment start address */
-#define CONFIG_ENV_SECT_SIZE	0x10000	   /* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE		0x1000	   /* max size for environment */
-
-#endif	/* __CONFIG_H */