MLK-21834-2 imx8qxp_mek: Update board codes and config

Add ENET no-DM support, CDNS USB3 host/gadget, M4 bootaux and memtest etc
Update some SPL configs:
1. Remove FIT support and enable TINY printf for saving SPL size.
2. Fix wrong SPL regulator driver enabled, show use fixed regulator not
   gpio.
3. Add flexspi defconfig which uses SPI relevant SPL configs and disable
   MMC, GPIO and regulator SPL drivers.
4. Enable the panic. Since we use PSCI to reset, but ATF is not boot when
   SPL is running.
5. Use full malloc not simple malloc which has dedicated malloc pool
   to support large pool size. The simple malloc size is also used by
   early malloc which occupies the stack space. This causes we can't
   have a large malloc pool

Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit db8230514ced8e6411c6d4a9089c5223cdf640ef)
(cherry picked from commit 4df1807b525823cf2c0cd61d00c5d066a90a3056)
(cherry picked from commit 1fce25d370f582bd54e9225aba99b641b516a91b)

1 files changed, 55 insertions, 17 deletions

diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 316b0cbfadc..a2fabe4c175 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -13,20 +13,21 @@
 #include "imx_env.h"
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_MAX_SIZE				(124 * 1024)
+#define CONFIG_SPL_MAX_SIZE				(192 * 1024)
 #define CONFIG_SYS_MONITOR_LEN				(1024 * 1024)
 
-#define CONFIG_SPL_STACK		0x013E000
-#define CONFIG_SPL_BSS_START_ADDR	0x00128000
+#define CONFIG_SPL_STACK		0x013fff0
+#define CONFIG_SPL_BSS_START_ADDR      0x00130000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x1000	/* 4 KB */
-#define CONFIG_SYS_SPL_MALLOC_START	0x00120000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x3000	/* 12 KB */
+#define CONFIG_SYS_SPL_MALLOC_START	0x82200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000	/* 512 KB */
 #define CONFIG_SERIAL_LPUART_BASE	0x5a060000
-#define CONFIG_MALLOC_F_ADDR		0x00120000
+#define CONFIG_MALLOC_F_ADDR		0x00138000
 
 #define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE
 
 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+
 #endif
 
 #define CONFIG_CMD_READ
@@ -41,16 +42,23 @@
 #define AHAB_ENV "sec_boot=no\0"
 #endif
 
+/* Boot M4 */
+#define M4_BOOT_ENV \
+	"m4_0_image=m4_0.bin\0" \
+	"loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4_0_image}\0" \
+	"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
+
 #define CONFIG_MFG_ENV_SETTINGS \
 	CONFIG_MFG_ENV_SETTINGS_DEFAULT \
 	"initrd_addr=0x83100000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
 	"emmc_dev=0\0" \
-	"sd_dev=1\0" \
+	"sd_dev=1\0"
 
 /* Initial environment variables */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	CONFIG_MFG_ENV_SETTINGS \
+	M4_BOOT_ENV \
 	AHAB_ENV \
 	"script=boot.scr\0" \
 	"image=Image\0" \
@@ -64,7 +72,7 @@
 	"mmcpart=1\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"mmcautodetect=yes\0" \
-	"mmcargs=setenv bootargs console=${console},${baudrate} root=${mmcroot}\0 " \
+	"mmcargs=setenv bootargs console=${console},${baudrate} earlycon root=${mmcroot}\0 " \
 	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
@@ -92,7 +100,7 @@
 				"echo wait for boot; " \
 			"fi;" \
 		"fi;\0" \
-	"netargs=setenv bootargs console=${console},${baudrate} " \
+	"netargs=setenv bootargs console=${console},${baudrate} earlycon " \
 		"root=/dev/nfs " \
 		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 	"netboot=echo Booting from net ...; " \
@@ -126,8 +134,6 @@
 
 #define CONFIG_SYS_INIT_SP_ADDR         0x80200000
 
-/* Default environment is in SD */
-
 /* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board */
 #define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
 #define CONFIG_SYS_FSL_USDHC_NUM	2
@@ -139,19 +145,51 @@
 /* LPDDR4 board total DDR is 3GB */
 #define PHYS_SDRAM_2_SIZE		0x40000000	/* 1 GB */
 
+/* Serial */
+#define CONFIG_BAUDRATE			115200
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+#define CONFIG_SYS_CBSIZE              2048
+#define CONFIG_SYS_MAXARGS             64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY		8000000	/* 8MHz */
 
-#ifndef CONFIG_DM_PCA953X
-#define CONFIG_PCA953X
+#define CONFIG_SERIAL_TAG
+
+/* USB Config */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_USBD_HS
+
+#endif
+
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+/* USB OTG controller configs */
+#ifdef CONFIG_USB_EHCI_HCD
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #endif
 
 /* Networking */
+#define CONFIG_FEC_ENET_DEV 0
+
+#if (CONFIG_FEC_ENET_DEV == 0)
+#define IMX_FEC_BASE			0x5B040000
+#define CONFIG_FEC_MXC_PHYADDR          0x0
+#define CONFIG_ETHPRIME                 "eth0"
+#elif (CONFIG_FEC_ENET_DEV == 1)
+#define IMX_FEC_BASE			0x5B050000
+#define CONFIG_FEC_MXC_PHYADDR          0x1
+#define CONFIG_ETHPRIME                 "eth1"
+#endif
+
 #define CONFIG_FEC_XCV_TYPE		RGMII
 
-/* Misc configuration */
-#define CONFIG_SYS_CBSIZE	2048
-#define CONFIG_SYS_MAXARGS	64
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 
 #endif /* __IMX8QXP_MEK_H */