summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorJon Loeliger <jdl@jdl.com>2007-07-04 22:33:17 -0500
committerWolfgang Denk <wd@denx.de>2007-07-05 11:05:08 +0200
commit26a34560d56a9df5bc2ae23525d9229736134757 (patch)
tree06fcb6de3b59643f20aca5b0d72f6da758378ae7 /include
parenta5cb23092a7d31490a33d4ec871468b63babfa3c (diff)
include/configs: Use new CONFIG_CMD_* in various p* named board config files.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Diffstat (limited to 'include')
-rw-r--r--include/configs/p3mx.h43
-rw-r--r--include/configs/p3p440.h47
-rw-r--r--include/configs/pb1x00.h31
-rw-r--r--include/configs/pcs440ep.h49
-rw-r--r--include/configs/pcu_e.h26
-rw-r--r--include/configs/pdnb3.h33
-rw-r--r--include/configs/pleb2.h12
-rw-r--r--include/configs/ppmc7xx.h45
-rw-r--r--include/configs/ppmc8260.h29
-rw-r--r--include/configs/purple.h10
-rw-r--r--include/configs/pxa255_idp.h14
11 files changed, 190 insertions, 149 deletions
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
index 54462f007cd..6994f7b62b1 100644
--- a/include/configs/p3mx.h
+++ b/include/configs/p3mx.h
@@ -253,24 +253,27 @@
#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_PCI | \
- CFG_CMD_CACHE | \
- CFG_CMD_SDRAM)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_SDRAM
+
/*-----------------------------------------------------------------------
* Miscellaneous configurable options
@@ -280,7 +283,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -421,7 +424,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h
index 22f9f84ec23..2a429614aaf 100644
--- a/include/configs/p3p440.h
+++ b/include/configs/p3p440.h
@@ -168,25 +168,28 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_SNTP
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -195,7 +198,7 @@
*----------------------------------------------------------------------*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -304,7 +307,7 @@
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -316,7 +319,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h
index ed1893f5742..c84795b6ab0 100644
--- a/include/configs/pb1x00.h
+++ b/include/configs/pb1x00.h
@@ -132,11 +132,8 @@
/*---USB -------------------------------------------*/
#if 0
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
#define CONFIG_DOS_PARTITION
-#else
-#define ADD_USB_CMD 0
#endif
/*---ATA PCMCIA ------------------------------------*/
@@ -179,11 +176,27 @@
#define CFG_ICACHE_SIZE 16384
#define CFG_CACHELINE_SIZE 32
-#define CONFIG_COMMANDS \
- (((CONFIG_CMD_DFL | CFG_CMD_DHCP | CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_PING) & \
- ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | CFG_CMD_IDE | \
- CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | CFG_CMD_ELF | \
- CFG_CMD_BDI | CFG_CMD_BEDBUG)) | ADD_USB_CMD)
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_RUN
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_BEDBUG
#endif /* __CONFIG_H */
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 751b51277ce..f0cd8d3c02f 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -208,37 +208,38 @@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FAT | \
- CFG_CMD_USB )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
-#define CONFIG_SUPPORT_VFAT
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_SUPPORT_VFAT
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -393,7 +394,7 @@
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -405,7 +406,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/pcu_e.h b/include/configs/pcu_e.h
index 73aa3a88259..1174e1aa4f8 100644
--- a/include/configs/pcu_e.h
+++ b/include/configs/pcu_e.h
@@ -89,28 +89,28 @@
* ---------------------------------------------------------------- */
#define CFG_SPI_INIT_OFFSET 0xB00
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_EEPROM | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#define CONFIG_BOOTP_MASK \
- ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-/*----------------------------------------------------------------------*/
+#define CONFIG_BOOTP_MASK \
+ ((CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE) & ~CONFIG_BOOTP_GATEWAY)
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 06c66528784..5d6e169c26a 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -71,25 +71,24 @@
#define CONFIG_BAUDRATE 115200
#define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */
-#if defined(CONFIG_SCPU)
-#define CMD_NAND_ADD 0
-#else
-#define CMD_NAND_ADD CFG_CMD_NAND
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_PING
+
+#if !defined(CONFIG_SCPU)
+#define CONFIG_CMD_NAND
#endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_DATE | \
- CFG_CMD_NET | \
- CFG_CMD_MII | \
- CMD_NAND_ADD | \
- CFG_CMD_I2C | \
- CFG_CMD_ELF | \
- CFG_CMD_PING)
-
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-/* These are u-boot generic parameters */
-#include <cmd_confdefs.h>
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h
index a6c23712b5d..f581fe5e23f 100644
--- a/include/configs/pleb2.h
+++ b/include/configs/pleb2.h
@@ -66,10 +66,14 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL & ~CFG_CMD_NET)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_NET
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
@@ -83,7 +87,7 @@
#define CONFIG_INITRD_TAG
#define CONFIG_SETUP_MEMORY_TAGS
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index 072b9dd5b46..6a3bd33d2e9 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -53,29 +53,35 @@
/*
* Monitor configuration
*
- * CONFIG_COMMANDS - List of command sets to include in shell
+ * List of command sets to include in shell
*
* The following command sets have been tested and known to work:
*
- * CFG_CMD_CACHE - Cache control commands
- * CFG_CMD_MEMORY - Memory display, change and test commands
- * CFG_CMD_FLASH - Erase and program flash
- * CFG_CMD_ENV - Environment commands
- * CFG_CMD_RUN - Run commands stored in env vars
- * CFG_CMD_ELF - Load ELF files
- * CFG_CMD_NET - Networking/file download commands
- * CFG_CMD_PING - ICMP Echo Request command
- * CFG_CMD_PCI - PCI Bus scanning command
+ * CMD_CACHE - Cache control commands
+ * CMD_MEMORY - Memory display, change and test commands
+ * CMD_FLASH - Erase and program flash
+ * CMD_ENV - Environment commands
+ * CMD_RUN - Run commands stored in env vars
+ * CMD_ELF - Load ELF files
+ * CMD_NET - Networking/file download commands
+ * CMD_PIN - ICMP Echo Request command
+ * CMD_PCI - PCI Bus scanning command
*/
-#define CONFIG_COMMANDS ( (CFG_CMD_DFL & ~(CFG_CMD_KGDB)) | \
- CFG_CMD_FLASH | \
- CFG_CMD_ENV | \
- CFG_CMD_RUN | \
- CFG_CMD_ELF | \
- CFG_CMD_NET | \
- CFG_CMD_PING | \
- CFG_CMD_PCI)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_PCI
+
+#undef CONFIG_CMD_KGDB
/*
@@ -149,9 +155,6 @@
*/
-#include <cmd_confdefs.h>
-
-
/*
* Memory map
*
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index d671dccc19b..d99da2fdbcf 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -275,14 +275,20 @@
/* Monitor Command Prompt */
#define CFG_PROMPT "=> "
-/* What U-Boot subsytems do you want enabled? */
-#define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
- CFG_CMD_ELF | \
- CFG_CMD_ASKENV | \
- CFG_CMD_REGINFO | \
- CFG_CMD_MEMTEST | \
- CFG_CMD_MII | \
- CFG_CMD_IMMAP)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_IMMAP
+
+#undef CONFIG_CMD_KGDB
/* Where do the internal registers live? */
@@ -298,13 +304,10 @@
#define CONFIG_PPMC8260 1 /* on an Wind River PPMC8260 Board */
#define CONFIG_CPM2 1 /* Has a CPM2 */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -477,7 +480,7 @@
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/purple.h b/include/configs/purple.h
index 2ecb7fb2bf7..61e18d7b715 100644
--- a/include/configs/purple.h
+++ b/include/configs/purple.h
@@ -81,8 +81,14 @@
""
#define CONFIG_BOOTCOMMAND "run flash_self"
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ELF)
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+
#define CFG_SDRAM_BASE 0x80000000
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index e5e27724e18..d7e4e8ac2b1 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -102,10 +102,16 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_DHCP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_DHCP
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTCOMMAND "bootm 40000"
@@ -192,7 +198,7 @@
/* "protect off" */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif