diff options
author | Vabhav Sharma <vabhav.sharma@nxp.com> | 2019-06-06 12:35:28 +0000 |
---|---|---|
committer | Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> | 2019-06-19 12:54:57 +0530 |
commit | d90c7ac7a95d1347747466779b6821b4600db4b8 (patch) | |
tree | 5e80a8ffe3fc84fb599449fbf0c55f0e62b67655 /include/fm_eth.h | |
parent | 196fa2efbe0cd1fcb3d2f13cb02ba3dfdde56122 (diff) |
armv8: ls1046afrwy: Add support for LS1046AFRWY platform
LS1046AFRWY board supports LS1046A family SoCs. This patch
add base support for this board.
Board support's 4GB ddr memory, i2c, micro-click module,microSD card,
serial console,qspi nor flash,ifc nand flash,qsgmii network interface,
usb 3.0 and serdes interface to support two x1gen3 pcie interface.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Diffstat (limited to 'include/fm_eth.h')
-rw-r--r-- | include/fm_eth.h | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/include/fm_eth.h b/include/fm_eth.h index 2e2ba756a0b..729ad63cd50 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2009-2012 Freescale Semiconductor, Inc. + * Copyright 2019 NXP */ #ifndef __FM_ETH_H__ @@ -41,8 +42,19 @@ enum fm_eth_type { FM_ETH_10G_E, }; +/* Historically, on FMan v3 platforms, the first MDIO bus has been used for + * Clause 22 PHYs and the second MDIO bus for 10G Clause 45 PHYs (thus the + * TGEC name). + * + * On LS1046A-FRWY, the QSGMII PHY is connected to the second MDIO bus, + * and no TGEC ports are present on-board. + */ #ifdef CONFIG_SYS_FMAN_V3 +#ifdef CONFIG_TARGET_LS1046AFRWY +#define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfd000) +#else #define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfc000) +#endif #define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfd000) #if (CONFIG_SYS_NUM_FMAN == 2) #define CONFIG_SYS_FM2_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfc000) |