arm: socfpga: Add DT support for SoCFPGA and add socfpga_socrates target

This patch includes the latest DT sources for socfpga from the current
Linux kernel. And enables CONFIG_OF_CONTROL for the new build target
"socfpga_socrates" (the EBV SoCrates board) to make use of this new DT
support.

Until this patch, the only SoCFPGA U-Boot target in mainline is
"socfpga_cyclone5". This build target is not (yet) changed to support
DT. So nothing changes for this target. Even though the long-term
goal should be to move all SoCFPGA targets over to DT.

One of the reasons to enable DT support in SoCFPGA is, that I need to
support multiple different SPI controllers for this platform. This is
the QSPI Cadence controller and the Designware SPI master controller.
Both are implemented in the SoCFPGA. And enabling both controllers is
only possible by using the new driver model (DM). The DM SPI code
only supports DT based probing. So it was easier to move SoCFPGA to
DT than to add the (deprecated) platform-data based probing to the
DM SPI suport.

Note that the image with the dtb embedded is u-boot-dtb.img. This needs
to be used now for those DT enabled boards instead of u-boot.img.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Vince Bridgers <vbridger@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Pavel Machek <pavel@denx.de>
Cc: Simon Glass <sjg@chromium.org>

1 files changed, 90 insertions, 0 deletions

diff --git a/include/dt-bindings/reset/altr,rst-mgr.h b/include/dt-bindings/reset/altr,rst-mgr.h
new file mode 100644
index 00000000000..3f04908fb87
--- /dev/null
+++ b/include/dt-bindings/reset/altr,rst-mgr.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2014, Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_H
+
+/* MPUMODRST */
+#define CPU0_RESET		0
+#define CPU1_RESET		1
+#define WDS_RESET		2
+#define SCUPER_RESET		3
+#define L2_RESET		4
+
+/* PERMODRST */
+#define EMAC0_RESET		32
+#define EMAC1_RESET		33
+#define USB0_RESET		34
+#define USB1_RESET		35
+#define NAND_RESET		36
+#define QSPI_RESET		37
+#define L4WD0_RESET		38
+#define L4WD1_RESET		39
+#define OSC1TIMER0_RESET	40
+#define OSC1TIMER1_RESET	41
+#define SPTIMER0_RESET		42
+#define SPTIMER1_RESET		43
+#define I2C0_RESET		44
+#define I2C1_RESET		45
+#define I2C2_RESET		46
+#define I2C3_RESET		47
+#define UART0_RESET		48
+#define UART1_RESET		49
+#define SPIM0_RESET		50
+#define SPIM1_RESET		51
+#define SPIS0_RESET		52
+#define SPIS1_RESET		53
+#define SDMMC_RESET		54
+#define CAN0_RESET		55
+#define CAN1_RESET		56
+#define GPIO0_RESET		57
+#define GPIO1_RESET		58
+#define GPIO2_RESET		59
+#define DMA_RESET		60
+#define SDR_RESET		61
+
+/* PER2MODRST */
+#define DMAIF0_RESET		64
+#define DMAIF1_RESET		65
+#define DMAIF2_RESET		66
+#define DMAIF3_RESET		67
+#define DMAIF4_RESET		68
+#define DMAIF5_RESET		69
+#define DMAIF6_RESET		70
+#define DMAIF7_RESET		71
+
+/* BRGMODRST */
+#define HPS2FPGA_RESET		96
+#define LWHPS2FPGA_RESET	97
+#define FPGA2HPS_RESET		98
+
+/* MISCMODRST*/
+#define ROM_RESET		128
+#define OCRAM_RESET		129
+#define SYSMGR_RESET		130
+#define SYSMGRCOLD_RESET	131
+#define FPGAMGR_RESET		132
+#define ACPIDMAP_RESET		133
+#define S2F_RESET		134
+#define S2FCOLD_RESET		135
+#define NRSTPIN_RESET		136
+#define TIMESTAMPCOLD_RESET	137
+#define CLKMGRCOLD_RESET	138
+#define SCANMGR_RESET		139
+#define FRZCTRLCOLD_RESET	140
+#define SYSDBG_RESET		141
+#define DBG_RESET		142
+#define TAPCOLD_RESET		143
+#define SDRCOLD_RESET		144
+
+#endif