summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-06-19 23:40:20 +0000
committerwdenk <wdenk>2003-06-19 23:40:20 +0000
commit6dd652fa4d8591a32e2707a91f4582ed13011b17 (patch)
tree52d7c375a3a33d634e7c30908a75bf9616d92854 /include/configs
parent52f52c1494eedaeacccad6e2331f4f638b48f5ab (diff)
Patches by Murray Jensen, 17 Jun 2003:
- Hymod board database mods: add "who" field and new xilinx chip types - provide new "init_cmd_timeout()" function so code external to "common/main.c" can use the "reset_cmd_timeout()" function before entering the main loop - add DTT support for adm1021 (new file dtt/adm1021.c; config slightly different. see include/configs/hymod.h for an example (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and CFG_DTT_ADM1021 defined) - add new "eeprom_probe()" function which has similar args and behaves in a similar way to "eeprom_read()" etc. - add 8260 FCC ethernet loopback code (new "eth_loopback_test()" function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST) - gdbtools copyright update - ensure that set_msr() executes the "sync" and "isync" instructions after the "mtmsr" instruction in cpu/mpc8260/interrupts.c - 8260 I/O ports fix: Open Drain should be set last when configuring - add SIU IRQ defines for 8260 - allow LDSCRIPT override and OBJCFLAGS initialization: change to config.mk to allow board configurations to override the GNU linker script, selected via the LDSCRIPT, make variable, and to give an initial value to the OBJCFLAGS make variable - 8260 i2c enhancement: o correctly extends the timeout depending on the size of all queued messages for both transmit and receive o will not continue with receive if transmit times out o ensures that the error callback is done for all queued tx and rx messages o correctly detects both tx and rx timeouts, only delivers one to the callback, and does not overwrite an earlier error o logic in i2c_probe now correct - add "vprintf()" function so that "panic()" function can be technically correct - many Hymod board changes
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/hymod.h110
1 files changed, 99 insertions, 11 deletions
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index e3a0ee3aeb..dc7de4461d 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -73,6 +73,9 @@
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
#undef CONFIG_ETHER_NONE /* define if ether on something else */
#define CONFIG_ETHER_INDEX 1 /* which channel for ether */
+#define CONFIG_ETHER_LOOPBACK_TEST /* add ether external loopback test */
+
+#ifdef CONFIG_ETHER_ON_FCC
#if (CONFIG_ETHER_INDEX == 1)
@@ -87,6 +90,10 @@
# define CFG_CPMFCR_RAMTYPE 0
# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define MDIO_PORT 0 /* Port A */
+# define MDIO_DATA_PINMASK 0x00040000 /* Pin 13 */
+# define MDIO_CLCK_PINMASK 0x00080000 /* Pin 12 */
+
#elif (CONFIG_ETHER_INDEX == 2)
/*
@@ -100,6 +107,10 @@
# define CFG_CPMFCR_RAMTYPE 0
# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define MDIO_PORT 0 /* Port A */
+# define MDIO_DATA_PINMASK 0x00000040 /* Pin 25 */
+# define MDIO_CLCK_PINMASK 0x00000080 /* Pin 24 */
+
#elif (CONFIG_ETHER_INDEX == 3)
/*
@@ -113,11 +124,33 @@
# define CFG_CPMFCR_RAMTYPE 0
# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
+# define MDIO_PORT 0 /* Port A */
+# define MDIO_DATA_PINMASK 0x00000100 /* Pin 23 */
+# define MDIO_CLCK_PINMASK 0x00000200 /* Pin 22 */
+
#endif /* CONFIG_ETHER_INDEX */
+#define CONFIG_MII /* MII PHY management */
+#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
+
+#define MDIO_ACTIVE (iop->pdir |= MDIO_DATA_PINMASK)
+#define MDIO_TRISTATE (iop->pdir &= ~MDIO_DATA_PINMASK)
+#define MDIO_READ ((iop->pdat & MDIO_DATA_PINMASK) != 0)
+
+#define MDIO(bit) if(bit) iop->pdat |= MDIO_DATA_PINMASK; \
+ else iop->pdat &= ~MDIO_DATA_PINMASK
+
+#define MDC(bit) if(bit) iop->pdat |= MDIO_CLCK_PINMASK; \
+ else iop->pdat &= ~MDIO_CLCK_PINMASK
+
+#define MIIDELAY udelay(1)
+
+#endif /* CONFIG_ETHER_ON_FCC */
+
/* other options */
#define CONFIG_HARD_I2C 1 /* To enable I2C hardware support */
+#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */
/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
#ifdef DEBUG
@@ -129,39 +162,52 @@
#if defined(CONFIG_CONS_USE_EXTC)
#define CONFIG_BAUDRATE 115200
#else
-#define CONFIG_BAUDRATE 38400
+#define CONFIG_BAUDRATE 9600
#endif
/* default ip addresses - these will be overridden */
#define CONFIG_IPADDR 192.168.1.1 /* hymod "boot" address */
#define CONFIG_SERVERIP 192.168.1.254 /* hymod "server" address */
+#define CONFIG_LAST_STAGE_INIT
+
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
CFG_CMD_BEDBUG | \
CFG_CMD_BMP | \
CFG_CMD_DOC | \
- CFG_CMD_ELF | \
CFG_CMD_FDC | \
CFG_CMD_FDOS | \
+ CFG_CMD_FPGA | \
CFG_CMD_HWFLOW | \
CFG_CMD_IDE | \
CFG_CMD_JFFS2 | \
CFG_CMD_NAND | \
- CFG_CMD_MII | \
CFG_CMD_MMC | \
CFG_CMD_PCMCIA | \
CFG_CMD_PCI | \
CFG_CMD_USB | \
CFG_CMD_SCSI | \
CFG_CMD_SPI | \
- CFG_CMD_VFD | \
- CFG_CMD_DTT ) )
+ CFG_CMD_VFD ) )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#ifdef DEBUG
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_BOOT_RETRY_TIME 30 /* retry autoboot after 30 secs */
+#define CONFIG_BOOT_RETRY_MIN 1 /* can go down to 1 second timeout */
+/* Be selective on what keys can delay or stop the autoboot process
+ * To stop use: " "
+ */
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
+ "press <SPACE> to stop\n"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+#undef CONFIG_AUTOBOOT_DELAY_STR
+#define DEBUG_BOOTKEYS 0
#endif
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
@@ -173,9 +219,9 @@
#define CONFIG_KGDB_EXTC_RATE 3686400 /* serial ext clk rate in Hz */
#define CONFIG_KGDB_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
# if defined(CONFIG_KGDB_USE_EXTC)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port at */
# else
-#define CONFIG_KGDB_BAUDRATE 38400 /* speed to run kgdb serial port at */
+#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
# endif
#endif
@@ -205,6 +251,8 @@
#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
#define CFG_MEMTEST_END 0x03c00000 /* 4 ... 60 MB in DRAM */
+#define CFG_CLKS_IN_HZ 1 /* everything, incl board info, in Hz */
+
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
@@ -217,9 +265,48 @@
/* these are for the ST M24C02 2kbit serial i2c eeprom */
#define CFG_I2C_EEPROM_ADDR 0x50 /* base address */
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+
+#define CFG_EEPROM_PAGE_WRITE_ENABLE 1 /* write eeprom in pages */
+#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* 16 byte write page size */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+#define CFG_I2C_MULTI_EEPROMS 1 /* hymod has two eeproms */
+
#define CFG_I2C_RTC_ADDR 0x51 /* philips PCF8563 RTC address */
/*
+ * standard dtt sensor configuration - bottom bit will determine local or
+ * remote sensor of the ADM1021, the rest determines index into
+ * CFG_DTT_ADM1021 array below.
+ *
+ * On HYMOD board, the remote sensor should be connected to the MPC8260
+ * temperature diode thingy, but an errata said this didn't work and
+ * should be disabled - so it isn't connected.
+ */
+#if 0
+#define CONFIG_DTT_SENSORS { 0, 1 }
+#else
+#define CONFIG_DTT_SENSORS { 0 }
+#endif
+
+/*
+ * ADM1021 temp sensor configuration (see dtt/adm1021.c for details).
+ * there will be one entry in this array for each two (dummy) sensors in
+ * CONFIG_DTT_SENSORS.
+ *
+ * For HYMOD board:
+ * - only one ADM1021
+ * - i2c addr 0x2a (both ADD0 and ADD1 are N/C)
+ * - conversion rate 0x02 = 0.25 conversions/second
+ * - ALERT ouput disabled
+ * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
+ * - remote temp sensor disabled (see comment for CONFIG_DTT_SENSORS above)
+ */
+#define CFG_DTT_ADM1021 { { 0x2a, 0x02, 0, 1, 0, 85, 0, } }
+
+/*
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
@@ -296,10 +383,6 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-#define CFG_FLASH_TYPE FLASH_28F640J3A
-#define CFG_FLASH_ID (INTEL_ID_28F640J3A & 0xff)
-#define CFG_FLASH_NBLOCKS 64
-
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */
@@ -610,6 +693,11 @@
#define FPGA_MEZZ_ENABLE_PIN 3 /* PA3 */
/*
+ * FPGA Interrupt configuration
+ */
+#define FPGA_MAIN_IRQ SIU_INT_IRQ2
+
+/*
* Internal Definitions
*
* Boot Flags