AT91: Board fix for AT91SAM9261-EK

Fix board part of AT91SAM9261-EK according to the new scheme

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

1 files changed, 71 insertions, 62 deletions

diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h
index 401478b2705..126907f445c 100644
--- a/include/configs/at91sam9261ek.h
+++ b/include/configs/at91sam9261ek.h
@@ -27,52 +27,62 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_AT91_LEGACY
-
 /* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000	/* 18.432 MHz crystal */
-#define CONFIG_SYS_HZ		1000
+#define CONFIG_SYS_HZ			1000
 
-#define CONFIG_ARM926EJS	1	/* This is an ARM926EJS Core	*/
-#ifdef CONFIG_AT91SAM9G10EK
-#define CONFIG_AT91SAM9G10	1	/* It's an Atmel AT91SAM9G10 SoC*/
+#ifdef CONFIG_AT91SAM9G10
+#define CONFIG_AT91SAM9G10EK		/* It's an Atmel AT91SAM9G10 EK*/
 #else
-#define CONFIG_AT91SAM9261	1	/* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_AT91SAM9261EK		/* It's an Atmel AT91SAM9261 EK*/
 #endif
+
+#include <asm/hardware.h>
+
 #define CONFIG_ARCH_CPU_INIT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
 
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	1
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_ATMEL_LEGACY
+#define CONFIG_SYS_TEXT_BASE		0x21f00000
+
 /*
  * Hardware drivers
  */
-#define CONFIG_AT91_GPIO	1
-#define CONFIG_ATMEL_USART	1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3		1	/* USART 3 is DBGU */
+
+/* gpio */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP		1
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
+#define CONFIG_USART_ID			ATMEL_ID_SYS
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{115200, 57600, 38400, 19200, 9600}
 
 /* LCD */
-#define CONFIG_LCD			1
+#define CONFIG_LCD
 #define LCD_BPP				LCD_COLOR8
-#define CONFIG_LCD_LOGO			1
+#define CONFIG_LCD_LOGO
 #undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO			1
-#define CONFIG_LCD_INFO_BELOW_LOGO	1
-#define CONFIG_SYS_WHITE_ON_BLACK		1
-#define CONFIG_ATMEL_LCD		1
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_LCD
 #ifdef CONFIG_AT91SAM9261EK
-#define CONFIG_ATMEL_LCD_BGR555		1
-#else
-#define	CONFIG_AT91SAM9G10_LCD_BASE		0x23E00000	/* LCD is no more in SRAM */
+#define CONFIG_ATMEL_LCD_BGR555
 #endif
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV		1
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
 
 /* LED */
 #define CONFIG_AT91_LED
@@ -85,10 +95,10 @@
 /*
  * BOOTP options
  */
-#define CONFIG_BOOTP_BOOTFILESIZE	1
-#define CONFIG_BOOTP_BOOTPATH		1
-#define CONFIG_BOOTP_GATEWAY		1
-#define CONFIG_BOOTP_HOSTNAME		1
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
@@ -101,33 +111,35 @@
 #undef CONFIG_CMD_LOADS
 #undef CONFIG_CMD_SOURCE
 
-#define CONFIG_CMD_PING		1
-#define CONFIG_CMD_DHCP		1
-#define CONFIG_CMD_NAND		1
-#define CONFIG_CMD_USB		1
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_USB
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM			0x20000000
-#define PHYS_SDRAM_SIZE			0x04000000	/* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE		0x20000000
+#define CONFIG_SYS_SDRAM_SIZE		0x04000000
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
 
 /* DataFlash */
 #define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH		1
+#define CONFIG_HAS_DATAFLASH
 #define CONFIG_SYS_SPI_WRITE_TOUT		(5*CONFIG_SYS_HZ)
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS		2
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3	0xD0000000	/* CS3 */
-#define AT91_SPI_CLK			15000000
-#define DATAFLASH_TCSS			(0x1a << 16)
-#define DATAFLASH_TCHS			(0x1 << 24)
+#define AT91_SPI_CLK				15000000
+#define DATAFLASH_TCSS				(0x1a << 16)
+#define DATAFLASH_TCHS				(0x1 << 24)
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE		1
 #define CONFIG_SYS_NAND_BASE			0x40000000
-#define CONFIG_SYS_NAND_DBW_8			1
+#define CONFIG_SYS_NAND_DBW_8
 /* our ALE is AD22 */
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 22)
 /* our CLE is AD21 */
@@ -138,24 +150,24 @@
 #endif
 
 /* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH			1
+#define CONFIG_SYS_NO_FLASH
 
 /* Ethernet */
-#define CONFIG_NET_MULTI		1
-#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_NET_MULTI
+#define CONFIG_DRIVER_DM9000
 #define CONFIG_DM9000_BASE		0x30000000
 #define DM9000_IO			CONFIG_DM9000_BASE
 #define DM9000_DATA			(CONFIG_DM9000_BASE + 4)
-#define CONFIG_DM9000_USE_16BIT		1
-#define CONFIG_DM9000_NO_SROM		1
+#define CONFIG_DM9000_USE_16BIT
+#define CONFIG_DM9000_NO_SROM
 #define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_RESET_PHY_R		1
+#define CONFIG_RESET_PHY_R
 
 /* USB */
 #define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW		1
-#define CONFIG_DOS_PARTITION		1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
 #define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000	/* AT91SAM9261_UHP_BASE */
 #ifdef CONFIG_AT91SAM9G10EK
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9g10"
@@ -163,18 +175,18 @@
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
 #endif
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE		1
-#define CONFIG_CMD_FAT			1
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_FAT
 
 #define CONFIG_SYS_LOAD_ADDR			0x22000000	/* load address */
 
-#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START		CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END			0x23e00000
 
 #ifdef CONFIG_SYS_USE_DATAFLASH_CS0
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_ENV_IS_IN_DATAFLASH
 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
 #define CONFIG_ENV_OFFSET	0x4200
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
@@ -188,7 +200,7 @@
 #elif CONFIG_SYS_USE_DATAFLASH_CS3
 
 /* bootstrap + u-boot + env + linux in dataflash on CS3 */
-#define CONFIG_ENV_IS_IN_DATAFLASH	1
+#define CONFIG_ENV_IS_IN_DATAFLASH
 #define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + 0x8400)
 #define CONFIG_ENV_OFFSET	0x4200
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 + CONFIG_ENV_OFFSET)
@@ -202,7 +214,7 @@
 #else /* CONFIG_SYS_USE_NANDFLASH */
 
 /* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_OFFSET		0x60000
 #define CONFIG_ENV_OFFSET_REDUND	0x80000
 #define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
@@ -216,22 +228,19 @@
 
 #endif
 
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{115200 , 19200, 38400, 57600, 9600 }
-
 #define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP		1
-#define CONFIG_CMDLINE_EDITING	1
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
 
 /*
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
 
-#define CONFIG_STACKSIZE	(32*1024)	/* regular stack */
+#define CONFIG_STACKSIZE		(32*1024)	/* regular stack */
 
 #ifdef CONFIG_USE_IRQ
 #error CONFIG_USE_IRQ not supported