diff options
author | Shengzhou Liu <Shengzhou.Liu@freescale.com> | 2014-02-21 13:16:19 +0800 |
---|---|---|
committer | York Sun <yorksun@freescale.com> | 2014-02-24 15:23:01 -0800 |
commit | 254887a57e93a818a10d95451a8ec29cb30c21f4 (patch) | |
tree | 91e95a7fa2c651a77f686cf86599ca773dbd1a0f /include/configs | |
parent | 35c471e509465366bbf0b92a589b5cdc69081a7d (diff) |
powerpc/t2081qds: Add T2081 QDS board support
T2081 QDS is a high-performance computing evaluation, development and
test platform supporting the T2081 QorIQ Power Architecture processor.
T2081QDS board Overview
-----------------------
- T2081 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
- 2MB shared L2 and 512KB L3 CoreNet platform cache (CPC)
- CoreNet fabric supporting coherent and noncoherent transactions with
prioritization and bandwidth allocation
- 32-/64-bit DDR3/DDR3LP SDRAM memory controller with ECC and interleaving
- Ethernet interfaces:
- Two on-board 10M/100M/1G bps RGMII ports
- Two 10Gbps XFI with on-board SFP+ cage
- 1Gbps/2.5Gbps SGMII Riser card
- 10Gbps XAUI Riser card
- Accelerator:
- DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
- SerDes:
- 8 lanes up to 10.3125GHz
- Supports SGMII, HiGig, XFI, XAUI and Aurora debug,
- IFC:
- 512MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
- eSPI:
- Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
- USB:
- Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
- PCIe:
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
- eSDHC:
- Supports various SD/SDHC/SDXC/eMMC devices with adapter cards and
voltage translators
- I2C:
- Four I2C controllers.
- UART:
- Dual 4-pins UART serial ports
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'include/configs')
-rw-r--r-- | include/configs/T208xQDS.h (renamed from include/configs/T2080QDS.h) | 29 |
1 files changed, 21 insertions, 8 deletions
diff --git a/include/configs/T2080QDS.h b/include/configs/T208xQDS.h index 9bd0fe23820..36afe9e0f98 100644 --- a/include/configs/T2080QDS.h +++ b/include/configs/T208xQDS.h @@ -5,21 +5,25 @@ */ /* - * T2080 QDS board configuration file + * T2080/T2081 QDS board configuration file */ -#ifndef __T2080QDS_H -#define __T2080QDS_H +#ifndef __T208xQDS_H +#define __T208xQDS_H -#define CONFIG_T2080QDS #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #define CONFIG_MMC #define CONFIG_SPI_FLASH #define CONFIG_USB_EHCI +#if defined(CONFIG_PPC_T2080) +#define CONFIG_T2080QDS #define CONFIG_FSL_SATA_V2 #define CONFIG_SYS_SRIO /* Enable Serial RapidIO Support */ #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ +#elif defined(CONFIG_PPC_T2081) +#define CONFIG_T2081QDS +#endif /* High Level Configuration Options */ #define CONFIG_PHYS_64BIT @@ -44,8 +48,12 @@ #ifdef CONFIG_RAMBOOT_PBL #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t2080qds/t2080_pbi.cfg -#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t2080qds/t2080_rcw.cfg +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t208xqds/t208x_pbi.cfg +#if defined(CONFIG_PPC_T2080) +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t208xqds/t2080_rcw.cfg +#elif defined(CONFIG_PPC_T2081) +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t208xqds/t2081_rcw.cfg +#endif #endif #define CONFIG_SRIO_PCIE_BOOT_MASTER @@ -447,7 +455,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH_SST #define CONFIG_SPI_FLASH_STMICRO +#if defined(CONFIG_T2080QDS) #define CONFIG_SPI_FLASH_SPANSION +#elif defined(CONFIG_T2081QDS) +#define CONFIG_SPI_FLASH_EON +#endif + #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -505,7 +518,7 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_PCI #define CONFIG_PCI_INDIRECT_BRIDGE -#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata LSZ ADD */ +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ #define CONFIG_NET_MULTI #define CONFIG_E1000 #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -801,4 +814,4 @@ unsigned long get_board_ddr_clk(void); #undef CONFIG_CMD_USB #endif -#endif /* __T2080QDS_H */ +#endif /* __T208xQDS_H */ |