* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)U-Boot-0_4_4

* Add support for MGT5100 and MPC5200 processors

4 files changed, 320 insertions, 148 deletions

diff --git a/include/configs/EXBITGEN.h b/include/configs/EXBITGEN.h
index f1ffcb31906..4e7051947cd 100644
--- a/include/configs/EXBITGEN.h
+++ b/include/configs/EXBITGEN.h
@@ -65,7 +65,7 @@
 /* Explanation:
    autbooting is altogether disabled and cannot be
    enabled if CONFIG_BOOTDELAY is negative.
-   If you want shorter bootdelay, then 
+   If you want shorter bootdelay, then
    - "setenv bootdelay <delay>" to the proper value
 */
 
@@ -111,11 +111,11 @@
 
 /* Default baud rate */
 #define CONFIG_BAUDRATE		115200
-	
+
 /* The following table includes the supported baudrates */
 #define CFG_BAUDRATE_TABLE      \
-        { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
-         57600, 115200, 230400, 460800, 921600 }
+	{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,     \
+	 57600, 115200, 230400, 460800, 921600 }
 
 #define CFG_CLKS_IN_HZ		1	/* everything, incl board info, in Hz */
 
@@ -177,7 +177,7 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#ifdef CFG_ENV_IS_IN_FLASH 
+#ifdef CFG_ENV_IS_IN_FLASH
 #define CFG_ENV_OFFSET		0x00060000 /* Offset of Environment Sector      */
 #define	CFG_ENV_SIZE		0x00010000 /* Total Size of Environment Sector	*/
 #define CFG_ENV_SECT_SIZE	0x00010000 /* see README - env sector total size */
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
new file mode 100644
index 00000000000..e6d735a2292
--- /dev/null
+++ b/include/configs/IceCube.h
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5XXX		1	/* This is an MPC5xxx CPU */
+#define CONFIG_ICECUBE		1	/* ... on IceCube board */
+
+#define CFG_MPC5XXX_CLKIN	33333333 /* ... running at 33MHz */
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL & ~(CFG_CMD_NET))
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+#define CONFIG_BOOTCOMMAND	"bootm 100000"	/* autoboot command */
+#define CONFIG_BOOTARGS		"root=/dev/ram rw"
+
+/*
+ * I2C configuration
+ */
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE		0xff800000
+#define CFG_FLASH_SIZE		0x00800000
+
+/*
+ * Flash organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max num of memory banks      */
+#define CFG_MAX_FLASH_SECT	128	/* max num of sects on one chip */
+
+#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
+
+#undef CONFIG_FLASH_16BIT /* Flash is 8-bit */
+
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE		0x10000
+#define CFG_ENV_ADDR        (CFG_FLASH_BASE + 0x740000)
+#define CFG_ENV_SECT_SIZE   0x10000
+
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xf0000000
+#define CFG_SDRAM_BASE		0x00000000
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE	/* End of used area in DPRAM */
+
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#if 0
+#define CONFIG_NET_MULTI	1
+#define CONFIG_MPC5XXX_FEC	1
+#endif
+
+/*
+ * GPIO configuration
+ */
+#define CFG_GPS_PORT_CONFIG	0x00000004
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	    */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)	/* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#define CFG_HID0_INIT		0
+#define CFG_HID0_FINAL		0
+
+#define CFG_BOOTCS_START	CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#define CFG_BOOTCS_CFG		0x00047801
+#define CFG_CS0_START		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x33333333
+
+#define CFG_RESET_ADDRESS	0xff000000
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h
index f902685b325..535ec798517 100644
--- a/include/configs/TOP860.h
+++ b/include/configs/TOP860.h
@@ -25,15 +25,15 @@
  * MA 02111-1307 USA
  */
 /*
- * TOP860 is a simple module:

- * 16-bit wide FLASH on CS0	(2MB or more)

- * 32-bit wide DRAM on CS2 (either 4MB or 16MB)

- * FEC with Am79C874 100-Base-T and Fiber Optic

- * Ports available, but we choose SMC1 for Console

+ * TOP860 is a simple module:
+ * 16-bit wide FLASH on CS0	(2MB or more)
+ * 32-bit wide DRAM on CS2 (either 4MB or 16MB)
+ * FEC with Am79C874 100-Base-T and Fiber Optic
+ * Ports available, but we choose SMC1 for Console
  * 8k I2C EEPROM at address 0xae, 6k user available, 2k factory set
- * 32768Hz crystal PLL set for 49.152MHz Core and 24.576MHz Bus Clock

- *

- * This config has been copied from MBX.h / MBX860T.h

+ * 32768Hz crystal PLL set for 49.152MHz Core and 24.576MHz Bus Clock
+ *
+ * This config has been copied from MBX.h / MBX860T.h
  */
 /*
  * board/config.h - configuration options, board specific
@@ -54,36 +54,36 @@
 #define CONFIG_MPC860T	1	/* even better... an FEC!	*/
 #define CONFIG_TOP860	1	/* ...on a TOP860 module	*/
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#define	CONFIG_IDENT_STRING " EMK TOP860"

+#define	CONFIG_IDENT_STRING " EMK TOP860"
 
 /*-----------------------------------------------------------------------
  * CLOCK settings
  */
-#define	CONFIG_SYSCLK	49152000

-#define	CFG_XTAL		32768

-#define	CONFIG_EBDF		1

-#define	CONFIG_COM		3

-#define	CONFIG_RTC_MPC8xx

-

+#define	CONFIG_SYSCLK	49152000
+#define	CFG_XTAL		32768
+#define	CONFIG_EBDF		1
+#define	CONFIG_COM		3
+#define	CONFIG_RTC_MPC8xx
+
 /*-----------------------------------------------------------------------
  * Physical memory map as defined by EMK
  */
 #define CFG_IMMR		0xFFF00000	/* Internal Memory Mapped Register */
-#define	CFG_FLASH_BASE	0x80000000	/* FLASH in final mapping */

-#define	CFG_DRAM_BASE	0x00000000	/* DRAM in final mapping */

-#define	CFG_FLASH_MAX	0x00400000	/* max FLASH to expect */

-#define	CFG_DRAM_MAX	0x01000000	/* max DRAM to expect */

-

+#define	CFG_FLASH_BASE	0x80000000	/* FLASH in final mapping */
+#define	CFG_DRAM_BASE	0x00000000	/* DRAM in final mapping */
+#define	CFG_FLASH_MAX	0x00400000	/* max FLASH to expect */
+#define	CFG_DRAM_MAX	0x01000000	/* max DRAM to expect */
+
 /*-----------------------------------------------------------------------
  * derived values
  */
-#define	CFG_MF			(CONFIG_SYSCLK/CFG_XTAL)

-#define	CFG_CPUCLOCK	CONFIG_SYSCLK

-#define	CFG_BRGCLOCK	CONFIG_SYSCLK

-#define	CFG_BUSCLOCK	(CONFIG_SYSCLK >> CONFIG_EBDF)

+#define	CFG_MF			(CONFIG_SYSCLK/CFG_XTAL)
+#define	CFG_CPUCLOCK	CONFIG_SYSCLK
+#define	CFG_BRGCLOCK	CONFIG_SYSCLK
+#define	CFG_BUSCLOCK	(CONFIG_SYSCLK >> CONFIG_EBDF)
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
-#define	CONFIG_8xx_GCLK_FREQ	CONFIG_SYSCLK

-

+#define	CONFIG_8xx_GCLK_FREQ	CONFIG_SYSCLK
+
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
@@ -92,8 +92,8 @@
 
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-

-#define	CFG_FLASH_CFI

+
+#define	CFG_FLASH_CFI
 
 /*-----------------------------------------------------------------------
  * Command interpreter
@@ -101,7 +101,7 @@
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #undef	CONFIG_8xx_CONS_SMC2
 #define CONFIG_BAUDRATE		9600
-

+
 /*
  * Allow partial commands to be matched to uniqueness.
  */
@@ -125,8 +125,8 @@
 								CFG_CMD_BEDBUG	\
 						      )
 
-#define	CONFIG_AUTOSCRIPT		1

-#define	CFG_LOADS_BAUD_CHANGE	1

+#define	CONFIG_AUTOSCRIPT		1
+#define	CFG_LOADS_BAUD_CHANGE	1
 #undef	CONFIG_LOADS_ECHO			/* NO echo on for serial download	*/
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -134,19 +134,19 @@
 
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-

+
 #undef	CFG_HUSH_PARSER			/* Hush parse for U-Boot	*/
-

+
 #ifdef	CFG_HUSH_PARSER
  #define CFG_PROMPT_HUSH_PS2	"> "
 #endif
-

+
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
  #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
  #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
 #endif
-

+
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS	16		/* max number of command args	*/
 #define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
@@ -156,63 +156,63 @@
  */
 #define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
 #define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-

+
 /*-----------------------------------------------------------------------
  * Environment handler
  * only the first 6k in EEPROM are available for user. Of that we use 256b
  */
-#define	CONFIG_SOFT_I2C

+#define	CONFIG_SOFT_I2C
 #define CFG_ENV_IS_IN_EEPROM	1	/* turn on EEPROM env feature */
 #define CFG_ENV_OFFSET		0x1000
-#define CFG_ENV_SIZE		0x0700

-#define CFG_I2C_EEPROM_ADDR 0x57

+#define CFG_ENV_SIZE		0x0700
+#define CFG_I2C_EEPROM_ADDR 0x57
 #define CFG_FACT_OFFSET		0x1800
-#define CFG_FACT_SIZE		0x0800

-#define CFG_I2C_FACT_ADDR	0x57

-#define CFG_EEPROM_PAGE_WRITE_BITS 3

-#define CFG_I2C_EEPROM_ADDR_LEN 2

+#define CFG_FACT_SIZE		0x0800
+#define CFG_I2C_FACT_ADDR	0x57
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_I2C_EEPROM_ADDR_LEN 2
 #define CFG_EEPROM_SIZE 0x2000
 #define	CFG_I2C_SPEED	100000
-#define	CFG_I2C_SLAVE	0xFE

-#define	CFG_EEPROM_PAGE_WRITE_DELAY_MS 12

-#define CONFIG_ENV_OVERWRITE

-#define CONFIG_MISC_INIT_R

-

-#if defined (CONFIG_SOFT_I2C)

-#define	SDA	0x00010

-#define	SCL	0x00020

-#define DIR immr->im_cpm.cp_pbdir

-#define DAT	immr->im_cpm.cp_pbdat

-#define PAR	immr->im_cpm.cp_pbpar

-#define	ODR	immr->im_cpm.cp_pbodr

-#define	I2C_INIT	{PAR&=~(SDA|SCL);ODR&=~(SDA|SCL);DAT|=(SDA|SCL);DIR|=(SDA|SCL);}

-#define	I2C_READ	((DAT&SDA)?1:0)

-#define	I2C_SDA(x)	{if(x)DAT|=SDA;else DAT&=~SDA;}

-#define	I2C_SCL(x)	{if(x)DAT|=SCL;else DAT&=~SCL;}

-#define	I2C_DELAY	{udelay(5);}

-#define	I2C_ACTIVE	 {DIR|=SDA;}

-#define	I2C_TRISTATE {DIR&=~SDA;}

+#define	CFG_I2C_SLAVE	0xFE
+#define	CFG_EEPROM_PAGE_WRITE_DELAY_MS 12
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_MISC_INIT_R
+
+#if defined (CONFIG_SOFT_I2C)
+#define	SDA	0x00010
+#define	SCL	0x00020
+#define DIR immr->im_cpm.cp_pbdir
+#define DAT	immr->im_cpm.cp_pbdat
+#define PAR	immr->im_cpm.cp_pbpar
+#define	ODR	immr->im_cpm.cp_pbodr
+#define	I2C_INIT	{PAR&=~(SDA|SCL);ODR&=~(SDA|SCL);DAT|=(SDA|SCL);DIR|=(SDA|SCL);}
+#define	I2C_READ	((DAT&SDA)?1:0)
+#define	I2C_SDA(x)	{if(x)DAT|=SDA;else DAT&=~SDA;}
+#define	I2C_SCL(x)	{if(x)DAT|=SCL;else DAT&=~SCL;}
+#define	I2C_DELAY	{udelay(5);}
+#define	I2C_ACTIVE	 {DIR|=SDA;}
+#define	I2C_TRISTATE {DIR&=~SDA;}
 #endif
 
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*-----------------------------------------------------------------------
  * defines we need to get FEC running
- */

+ */
 #define	CONFIG_NET_MULTI	1	/* the only way to get the FEC in */
 #define CONFIG_FEC_ENET 	1	/* Ethernet only via FEC	*/
-#define	FEC_ENET			1	/* eth.c needs it that way... */

+#define	FEC_ENET			1	/* eth.c needs it that way... */
 #define CFG_DISCOVER_PHY	1
 #define CONFIG_MII			1
 #define CONFIG_PHY_ADDR		31
-

+
 /*-----------------------------------------------------------------------
  * adresses
- */

+ */
 #define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MONITOR_BASE	TEXT_BASE
 #define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-

+
 /*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
@@ -220,7 +220,7 @@
  */
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0x80000000
-

+
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
@@ -262,36 +262,36 @@
 /*-----------------------------------------------------------------------
  * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
  *-----------------------------------------------------------------------
- * set up PLPRCR (PLL, Low-Power, and Reset Control Register)

- *	12	MF		calculated	Multiplication factor

- *	4	0		0000

- *	1	SPLSS	0			System PLL lock status sticky

- *	1	TEXPS	1			Timer expired status

- *	1	0		0

- *	1	TMIST	0			Timers interrupt status

- *	1	0		0

- *	1	CSRC	0			Clock source (0=DFNH, 1=DFNL)

- *	2	LPM		00			Low-power modes

- *	1	CSR		0			Checkstop reset enable

- *	1	LOLRE	0			Loss-of-lock reset enable

- *	1	FIOPD	0			Force I/O pull down

- *	5	0		00000			

+ * set up PLPRCR (PLL, Low-Power, and Reset Control Register)
+ *	12	MF		calculated	Multiplication factor
+ *	4	0		0000
+ *	1	SPLSS	0			System PLL lock status sticky
+ *	1	TEXPS	1			Timer expired status
+ *	1	0		0
+ *	1	TMIST	0			Timers interrupt status
+ *	1	0		0
+ *	1	CSRC	0			Clock source (0=DFNH, 1=DFNL)
+ *	2	LPM		00			Low-power modes
+ *	1	CSR		0			Checkstop reset enable
+ *	1	LOLRE	0			Loss-of-lock reset enable
+ *	1	FIOPD	0			Force I/O pull down
+ *	5	0		00000			
  */
 #define CFG_PLPRCR	(PLPRCR_TEXPS | ((CFG_MF-1)<<20))
-

+
 /*-----------------------------------------------------------------------
  * SYPCR - System Protection Control				11-9
  * SYPCR can only be written once after reset!
  *-----------------------------------------------------------------------
- * set up SYPCR:

- *	16	SWTC	0xffff		Software watchdog timer count

- *	8	BMT		0xff 		Bus monitor timing

- *	1	BME		1			Bus monitor enable

- *	3	0		000

- *	1	SWF		1			Software watchdog freeze

- *	1	SWE		0/1			Software watchdog enable

- *	1	SWRI	0/1			Software watchdog reset/interrupt select (1=HRESET)

- *	1	SWP		0/1			Software watchdog prescale (1=/2048)

+ * set up SYPCR:
+ *	16	SWTC	0xffff		Software watchdog timer count
+ *	8	BMT		0xff 		Bus monitor timing
+ *	1	BME		1			Bus monitor enable
+ *	3	0		000
+ *	1	SWF		1			Software watchdog freeze
+ *	1	SWE		0/1			Software watchdog enable
+ *	1	SWRI	0/1			Software watchdog reset/interrupt select (1=HRESET)
+ *	1	SWP		0/1			Software watchdog prescale (1=/2048)
  */
 #if defined (CONFIG_WATCHDOG)
  #define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
@@ -303,31 +303,31 @@
 /*-----------------------------------------------------------------------
  * SIUMCR - SIU Module Configuration				11-6
  *-----------------------------------------------------------------------
- * set up SIUMCR

- *	1	EARB	0			External arbitration

- *	3	EARP	000			External arbitration request priority

- *	4	0		0000

- *	1	DSHW	0			Data show cycles

- *	2	DBGC	00			Debug pin configuration

- *	2	DBPC	00			Debug port pins configuration

- *	1	0		0

- *	1	FRC		0			FRZ pin configuration

- *	1	DLK		0			Debug register lock

- *	1	OPAR	0			Odd parity

- *	1	PNCS	0			Parity enable for non memory controller regions

- *	1	DPC		0			Data parity pins configuration

- *	1	MPRE	0			Multiprocessor reservation enable

- *	2	MLRC	11			Multi level reservation control (00=IRQ4, 01=3State, 10=KR/RETRY, 11=SPKROUT)

- *	1	AEME	0			Async external master enable

- *	1	SEME	0			Sync external master enable

- *	1	BSC		0			Byte strobe configuration

- *	1	GB5E	0			GPL_B5 enable

- *	1	B2DD	0			Bank 2 double drive			

- *	1	B3DD	0			Bank 3 double drive			

- *	4	0		0000

+ * set up SIUMCR
+ *	1	EARB	0			External arbitration
+ *	3	EARP	000			External arbitration request priority
+ *	4	0		0000
+ *	1	DSHW	0			Data show cycles
+ *	2	DBGC	00			Debug pin configuration
+ *	2	DBPC	00			Debug port pins configuration
+ *	1	0		0
+ *	1	FRC		0			FRZ pin configuration
+ *	1	DLK		0			Debug register lock
+ *	1	OPAR	0			Odd parity
+ *	1	PNCS	0			Parity enable for non memory controller regions
+ *	1	DPC		0			Data parity pins configuration
+ *	1	MPRE	0			Multiprocessor reservation enable
+ *	2	MLRC	11			Multi level reservation control (00=IRQ4, 01=3State, 10=KR/RETRY, 11=SPKROUT)
+ *	1	AEME	0			Async external master enable
+ *	1	SEME	0			Sync external master enable
+ *	1	BSC		0			Byte strobe configuration
+ *	1	GB5E	0			GPL_B5 enable
+ *	1	B2DD	0			Bank 2 double drive			
+ *	1	B3DD	0			Bank 3 double drive			
+ *	4	0		0000
  */
 #define CFG_SIUMCR	(SIUMCR_MLRC11)
-

+
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
  *-----------------------------------------------------------------------
@@ -345,30 +345,30 @@
 /*-----------------------------------------------------------------------
  * SCCR - System Clock and reset Control Register		15-27
  *-----------------------------------------------------------------------
- * set up SCCR (System Clock and Reset Control Register)

- *	1	0		0

- *	2	COM		11			Clock output module (00=full, 01=half, 11=off)

- *	3	0		000

- *	1	TBS		1			Timebase source (0=OSCCLK, 1=GCLK2)

- *	1	RTDIV	0			Real-time clock divide (0=/4, 1=/512)

- *	1	RTSEL	0			Real-time clock select (0=OSCM, 1=EXTCLK)

- *	1	CRQEN	0			CPM request enable

- *	1	PRQEN	0			Power management request enable

- *	2	0		00

- *	2	EBDF	xx			External bus division factor

- *	2	0		00

- *	2	DFSYNC	00			Division factor for SYNCLK

- *	2	DFBRG	00			Division factor for BRGCLK

- *	3	DFNL	000			Division factor low frequency

- *	3	DFNH	000			Division factor high frequency

- *	5	0		00000

+ * set up SCCR (System Clock and Reset Control Register)
+ *	1	0		0
+ *	2	COM		11			Clock output module (00=full, 01=half, 11=off)
+ *	3	0		000
+ *	1	TBS		1			Timebase source (0=OSCCLK, 1=GCLK2)
+ *	1	RTDIV	0			Real-time clock divide (0=/4, 1=/512)
+ *	1	RTSEL	0			Real-time clock select (0=OSCM, 1=EXTCLK)
+ *	1	CRQEN	0			CPM request enable
+ *	1	PRQEN	0			Power management request enable
+ *	2	0		00
+ *	2	EBDF	xx			External bus division factor
+ *	2	0		00
+ *	2	DFSYNC	00			Division factor for SYNCLK
+ *	2	DFBRG	00			Division factor for BRGCLK
+ *	3	DFNL	000			Division factor low frequency
+ *	3	DFNH	000			Division factor high frequency
+ *	5	0		00000
  */
 #define SCCR_MASK	0
-#if CONFIG_EBDF

+#if CONFIG_EBDF
  #define CFG_SCCR	(SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
-#else

+#else
  #define CFG_SCCR	(SCCR_COM11 | SCCR_TBS)
-#endif

+#endif
 
 /*-----------------------------------------------------------------------
  * Chip Select 0 - FLASH
@@ -379,7 +379,7 @@
 #define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR)
 #define CFG_OR0_PRELIM	(-CFG_FLASH_MAX | CFG_OR_TIMING_FLASH)
 #define CFG_BR0_PRELIM	(CFG_FLASH_BASE | BR_PS_16 | BR_V )
-

+
 /*-----------------------------------------------------------------------
  * misc
  *-----------------------------------------------------------------------
@@ -408,11 +408,11 @@
 /*
  * BOOTP options
  */
-#undef	CONFIG_BOOTP_MASK

+#undef	CONFIG_BOOTP_MASK
 #define CONFIG_BOOTP_MASK				( CONFIG_BOOTP_DEFAULT		| \
 									  	  CONFIG_BOOTP_BOOTFILESIZE   \
-										)

-										

+										)
+										
 
 /*
  * Set default IP stuff just to get bootstrap entries into the
@@ -421,13 +421,13 @@
 #define CONFIG_ETHADDR					9a:52:63:15:85:25
 #define CONFIG_SERVERIP					10.0.4.200
 #define CONFIG_IPADDR					10.0.4.111
-

+
 /*-----------------------------------------------------------------------
  * Defaults for Autoscript
  */
 #define CFG_LOAD_ADDR		0x00100000	/* default load address */
 #define	CFG_TFTP_LOADADDR	0x00100000
-

+
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
@@ -435,5 +435,5 @@
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
-

+
 #endif	/* __CONFIG_H */
diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h
index 001e21aea96..540630b5932 100644
--- a/include/configs/omap1510.h
+++ b/include/configs/omap1510.h
@@ -521,7 +521,6 @@ typedef struct {
 #define WDTIM_CONTROL_ST	BIT7
 
 
-
 /* ---------------------------------------------------------------------------
  *  Differentiating processor versions for those who care.
  * ---------------------------------------------------------------------------