summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-08-01 22:48:16 +0000
committerwdenk <wdenk>2004-08-01 22:48:16 +0000
commit281e00a3be453a169d854f824a460359d10f92bb (patch)
tree43dab398f1d6f601bb44df108427f7e0c611d68d /include/configs
parentcfca5e604d5692f081cc1a9185ca5dc6dc77599d (diff)
* Code cleanup
* Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards * Patches by Marc Leeman, 23 Jul 2004: - Add define for the PCI/Memory Buffer Configuration Register - corrected comments in cpu/mpc824x/cpu_init.c * Add support for multiple serial interfaces (for example to allow modem dial-in / dial-out)
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/PPChameleonEVB.h9
-rw-r--r--include/configs/Total5200.h1
-rw-r--r--include/configs/lwmon.h18
-rw-r--r--include/configs/mx1ads.h89
-rw-r--r--include/configs/mx1fs2.h291
-rw-r--r--include/configs/scb9328.h357
6 files changed, 706 insertions, 59 deletions
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index bb8ce43babf..b1f41a17279 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -43,6 +43,9 @@
* CONFIG_PPCHAMELEON_CLK_25
* CONFIG_PPCHAMELEON_CLK_33
*/
+#if (!defined(CONFIG_PPCHAMELEON_CLK_25) && !defined(CONFIG_PPCHAMELEON_CLK_33))
+#define CONFIG_PPCHAMELEON_CLK_33
+#endif
#if (defined(CONFIG_PPCHAMELEON_CLK_25) && defined(CONFIG_PPCHAMELEON_CLK_33))
#error "* Two external frequencies (SysClk) are defined! *"
@@ -74,11 +77,11 @@
#ifdef CONFIG_PPCHAMELEON_CLK_25
- #define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
+# define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */
#elif (defined (CONFIG_PPCHAMELEON_CLK_33))
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+# define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
#else
-#error "* External frequency (SysClk) not defined! *"
+# error "* External frequency (SysClk) not defined! *"
#endif
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 830bf81a451..47f24be5206 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -64,6 +64,7 @@
* Video console
*/
#if 1
+#define CONFIG_VIDEO
#define CONFIG_VIDEO_SED13806
#define CONFIG_VIDEO_SED13806_16BPP
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index d944ed88cdd..a76ec23652b 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -47,11 +47,9 @@
#define CONFIG_SPLASH_SCREEN /* ... with splashscreen support*/
-#if 1
+#define CONFIG_SERIAL_MULTI 1
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
-#else
-#define CONFIG_8xx_CONS_SCC2
-#endif
+#define CONFIG_8xx_CONS_SCC2 1 /* Console is on SCC2 */
#define CONFIG_BAUDRATE 115200 /* with watchdog >= 38400 needed */
@@ -151,17 +149,6 @@
#define CFG_CMD_POST_DIAG 0
#endif
-#ifdef CONFIG_8xx_CONS_SCC2 /* Can't use ethernet, then */
-#define CONFIG_COMMANDS ( (CONFIG_CMD_DFL & ~CFG_CMD_NET) | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C | \
- CFG_CMD_EEPROM | \
- CFG_CMD_IDE | \
- CFG_CMD_BSP | \
- CFG_CMD_BMP | \
- CFG_CMD_POST_DIAG )
-#else
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \
@@ -172,7 +159,6 @@
CFG_CMD_BSP | \
CFG_CMD_BMP | \
CFG_CMD_POST_DIAG )
-#endif
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 5cf092af550..df951e2d745 100644
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -16,7 +16,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -25,7 +25,6 @@
* MA 02111-1307 USA
*/
-
#ifndef __CONFIG_H
#define __CONFIG_H
@@ -40,14 +39,19 @@
* (easy to change)
*/
#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_MC9328 1 /* It's a Motorola MC9328 SoC */
-#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */
-
-#define BOARD_LATE_INIT 1
+#define CONFIG_IMX 1 /* It's a Motorola MC9328 SoC */
+#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */
+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
+/*
+ * Select serial console configuration
+ */
+#define CONFIG_IMX_SERIAL1 /* internal uart 1 */
+/* #define _CONFIG_UART2 */ /* internal uart 2 */
+/* #define CONFIG_SILENT_CONSOLE */ /* use this to disable output */
+#define BOARD_LATE_INIT 1
#define USE_920T_MMU 1
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#if 0
#define CFG_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
@@ -60,6 +64,8 @@
*/
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+
+
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
/*
@@ -67,13 +73,13 @@
*/
#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
#define CS8900_BASE 0x15000300
-#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
/*
* select serial console configuration
*/
-#define CONFIG_UART1 1
+/* #define CONFIG_UART1 */
/* #define CONFIG_UART2 1 */
#define CONFIG_BAUDRATE 115200
@@ -85,24 +91,20 @@
#define CONFIG_COMMANDS \
(CONFIG_CMD_DFL | \
CFG_CMD_CACHE | \
- /*CFG_CMD_NAND |*/ \
- /*CFG_CMD_EEPROM |*/ \
- /*CFG_CMD_I2C |*/ \
- /*CFG_CMD_USB |*/ \
- CFG_CMD_REGINFO | \
+ CFG_CMD_REGINFO | \
CFG_CMD_ELF)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/docbp mem=48M"
+#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M"
#define CONFIG_ETHADDR 08:00:3e:26:0a:5c
-#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.0.22
#define CONFIG_SERVERIP 192.168.0.11
#define CONFIG_BOOTFILE "mx1ads"
-/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */
+#define CONFIG_BOOTCOMMAND "tftp; bootm"
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
@@ -114,10 +116,10 @@
* Miscellaneous configurable options
*/
-#define CFG_HUSH_PARSER 1
+#define CFG_HUSH_PARSER 1
#define CFG_PROMPT_HUSH_PS2 "> "
-#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LONGHELP /* undef to save memory */
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT "MX1ADS$ " /* Monitor Command Prompt */
@@ -125,21 +127,20 @@
#define CFG_PROMPT "MX1ADS=> " /* Monitor Command Prompt */
#endif
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
/* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x09000000 /* memtest works on */
#define CFG_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR 0x08800000 /* default load address */
-
-
-#define CFG_HZ 1000
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#define CFG_LOAD_ADDR 0x08800000 /* default load address */
+/*#define CFG_HZ 1000 */
+#define CFG_HZ 3686400
+#define CFG_CPUSPEED 0x141
/* valid baudrates */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
@@ -159,27 +160,35 @@
* Physical Memory Map
*/
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
+#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */
+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
-#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define CFG_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */
-#define CFG_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */
-#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
-
+#define CFG_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */
+#define CFG_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */
+#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
-
#define CONFIG_SYNCFLASH 1
#define PHYS_FLASH_SIZE 0x01000000
#define CFG_MAX_FLASH_SECT (16)
-#define CFG_ENV_ADDR (CFG_FLASH_BASE+0x00ff0000)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE+0x00ff8000)
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_SIZE 0x0f000 /* Total Size of Environment Sector */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */
#define CFG_ENV_SECT_SIZE 0x100000
+
+/*-----------------------------------------------------------------------
+ * Enable passing ATAGS
+ */
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+
+#define CONFIG_SYS_CLK_FREQ 16780000
+#define CONFIG_SYSPLL_CLK_FREQ 16000000
+
#endif /* __CONFIG_H */
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
new file mode 100644
index 00000000000..61a3b29612e
--- /dev/null
+++ b/include/configs/mx1fs2.h
@@ -0,0 +1,291 @@
+/*
+ * Copyright (C) 2004 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
+#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
+#define CONFIG_MX1FS2 1 /* on a mx1fs2 board */
+#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
+
+/*
+ * Select serial console configuration
+ */
+#undef _CONFIG_UART1 /* internal uart 1 */
+#define _CONFIG_UART2 /* internal uart 2 */
+#undef _CONFIG_UART3 /* internal uart 3 */
+#undef _CONFIG_UART4 /* internal uart 4 */
+#undef CONFIG_SILENT_CONSOLE /* use this to disable output */
+
+/*
+ * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
+ * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
+ * functionality or size of u-boot code.
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ & ~CFG_CMD_LOADS \
+ & ~CFG_CMD_CONSOLE \
+ & ~CFG_CMD_AUTOSCRIPT \
+ & ~CFG_CMD_NET \
+ & ~CFG_CMD_PING \
+ & ~CFG_CMD_DHCP \
+ | CFG_CMD_JFFS2 \
+ )
+
+#include <cmd_confdefs.h>
+
+/*
+ * Boot options. Setting delay to -1 stops autostart count down.
+ */
+#define CONFIG_BOOTDELAY 10
+#define CONFIG_BOOTARGS "root=/dev/mtdblock4 console=ttySMX0,115200n8 rootfstype=jffs2"
+#define CONFIG_BOOTCOMMAND "bootm 10080000"
+#define CONFIG_SHOW_BOOT_PROGRESS
+
+/*
+ * General options for u-boot. Modify to save memory foot print
+ */
+#define CFG_LONGHELP /* undef saves memory */
+#define CFG_PROMPT "mx1fs2> " /* prompt string */
+#define CFG_CBSIZE 256 /* console I/O buffer */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size */
+#define CFG_MAXARGS 16 /* max command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* boot args buf size */
+
+#define CFG_MEMTEST_START 0x08100000 /* memtest test area */
+#define CFG_MEMTEST_END 0x08F00000
+
+#undef CFG_CLKS_IN_HZ /* use HZ for freq. display */
+
+#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED 0x141 /* core clock - register value */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BAUDRATE 115200
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
+#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
+#define CONFIG_INITRD_TAG 1 /* send initrd params */
+#undef CONFIG_VFD /* do not send framebuffer setup */
+
+#define CFG_JFFS_CUSTOM_PART
+/*
+ * Malloc pool need to host env + 128 Kb reserve for other allocations.
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + (128<<10) )
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+#define CONFIG_STACKSIZE (120<<10) /* stack size */
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
+#endif
+
+/* SDRAM Setup Values
+ * 0x910a8300 Precharge Command CAS 3
+ * 0x910a8200 Precharge Command CAS 2
+ *
+ * 0xa10a8300 AutoRefresh Command CAS 3
+ * 0xa10a8200 Set AutoRefresh Command CAS 2
+ */
+#define PRECHARGE_CMD 0x910a8300
+#define AUTOREFRESH_CMD 0xa10a8300
+
+#define CONFIG_INIT_CRITICAL
+
+#define BUS32BIT_VERSION
+/*
+ * SDRAM Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
+#define MX1FS2_SDRAM_1 0x08000000 /* SDRAM bank #1 */
+#ifdef BUS32BIT_VERSION
+#define MX1FS2_SDRAM_1_SIZE (0x04000000 - 0x100000) /* 64 MB - 1M Framebuffer */
+#else
+#define MX1FS2_SDRAM_1_SIZE (0x01FC0000 - 0x100000) /* 32 MB - 1M Framebuffer */
+#endif
+/*
+ * Flash Controller settings
+ */
+
+#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */
+
+#ifdef BUS32BIT_VERSION
+#define MX1FS2_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
+#define MX1FS2_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
+#define MX1FS2_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank*/
+#define MX1FS2_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
+#define MX1FS2_JFFS2_PART0_START 0x10200000
+#define MX1FS2_JFFS2_PART0_SIZE 0x00500000
+#define MX1FS2_JFFS2_PART1_START 0x10700000
+#define MX1FS2_JFFS2_PART1_SIZE 0x00900000
+#else
+#define MX1FS2_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
+#define MX1FS2_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
+#define MX1FS2_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank*/
+#define MX1FS2_FLASH_SECT_SIZE 0x00010000 /* size of erase sector */
+#endif
+#define MX1FS2_FLASH_BASE 0x10000000 /* location of flash memory */
+#define MX1FS2_FLASH_UNLOCK 1 /* perform hw unlock first */
+
+/* This should be defined if CFI FLASH device is present. Actually benefit
+ is not so clear to me. In other words we can provide more informations
+ to user, but this expects more complex flash handling we do not provide
+ now.*/
+#undef CFG_FLASH_CFI
+
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* timeout for Erase operation */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* timeout for Write operation */
+
+#define CFG_FLASH_BASE MX1FS2_FLASH_BASE
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * Right now there is no gain for user, but later on booting kernel might be
+ * possible. Consider using XIP kernel running from flash to save RAM
+ * footprint.
+ * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ */
+#define CFG_JFFS2_FIRST_BANK 0
+#define CFG_JFFS2_FIRST_SECTOR 5
+#define CFG_JFFS2_NUM_BANKS 1
+
+/*
+ * Environment setup. Definitions of monitor location and size with
+ * definition of environment setup ends up in 2 possibilities.
+ * 1. Embeded environment - in u-boot code is space for environment
+ * 2. Environment is read from predefined sector of flash
+ * Right now we support 2. possiblity, but expecting no env placed
+ * on mentioned address right now. This also needs to provide whole
+ * sector for it - for us 256Kb is really waste of memory. U-boot uses
+ * default env. and until kernel parameters could be sent to kernel
+ * env. has no sense to us.
+ */
+
+#define CFG_MONITOR_BASE 0x10000000
+#define CFG_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0x10020000 /* absolute address for now */
+#define CFG_ENV_SIZE 0x20000
+
+#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */
+
+/* Setup CS4 and CS5 */
+#define CFG_GIUS_A_VAL 0x0003fffe
+
+/*
+ * CSxU_VAL:
+ * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32
+ * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC |
+ *
+ * CSxL_VAL:
+ * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0
+ * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN|
+ */
+
+#define CFG_CS0U_VAL 0x00008C00
+#define CFG_CS0L_VAL 0x22222601
+#define CFG_CS1U_VAL 0x00008C00
+#define CFG_CS1L_VAL 0x22222301
+#define CFG_CS4U_VAL 0x00008C00
+#define CFG_CS4L_VAL 0x22222301
+#define CFG_CS5U_VAL 0x00008C00
+#define CFG_CS5L_VAL 0x22222301
+
+/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
+ f_ref=16,777MHz
+
+ 0x002a141f: 191,9944MHz
+ 0x040b2007: 144MHz
+ 0x042a141f: 96MHz
+ 0x0811140d: 64MHz
+ 0x040e200e: 150MHz
+ 0x00321431: 200MHz
+
+ 0x08001800: 64MHz mit 16er Quarz
+ 0x04001800: 96MHz mit 16er Quarz
+ 0x04002400: 144MHz mit 16er Quarz
+
+ 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
+ |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */
+
+#define CFG_MPCTL0_VAL 0x07E723AD
+#define CFG_MPCTL1_VAL 0x00000040
+#define CFG_PCDR_VAL 0x00010005
+#define CFG_GPCR_VAL 0x00000FFB
+
+#define USE_16M_OSZI /* If you have one, you want to use it
+ The internal 32kHz oszillator jitters */
+#ifdef USE_16M_OSZI
+
+#define CFG_SPCTL0_VAL 0x04001401
+#define CFG_SPCTL1_VAL 0x0C000040
+#define CFG_CSCR_VAL 0x07030003
+#define CONFIG_SYS_CLK_FREQ 16780000
+#define CONFIG_SYSPLL_CLK_FREQ 16000000
+
+#else
+
+#define CFG_SPCTL0_VAL 0x07E716D1
+#define CFG_CSCR_VAL 0x06000003
+#define CONFIG_SYS_CLK_FREQ 16780000
+#define CONFIG_SYSPLL_CLK_FREQ 16780000
+
+#endif
+
+/*
+ * Well this has to be defined, but on the other hand it is used differently
+ * one may expect. For instance loadb command do not cares :-)
+ * So advice is - do not relay on this...
+ */
+#define CFG_LOAD_ADDR 0x08400000
+
+#define CFG_FMCR_VAL 0x00000003 /* Reset Default */
+
+/* Bit[0:3] contain PERCLK1DIV for UART 1
+ 0x000b00b ->b<- -> 192MHz/12=16MHz
+ 0x000b00b ->8<- -> 144MHz/09=16MHz
+ 0x000b00b ->3<- -> 64MHz/4=16MHz */
+
+#ifdef _CONFIG_UART1
+#define CONFIG_IMX_SERIAL1
+#elif defined _CONFIG_UART2
+#define CONFIG_IMX_SERIAL2
+#elif defined _CONFIG_UART3 | defined _CONFIG_UART4
+#define CONFIG_IMX_SERIAL_NONE
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_CLK 3686400
+#define CFG_NS16550_REG_SIZE 1
+#define CONFIG_CONS_INDEX 1
+#ifdef _CONFIG_UART3
+#define CFG_NS16550_COM1 0x15000000
+#elif defined _CONFIG_UART4
+#define CFG_NS16550_COM1 0x16000000
+#endif
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
new file mode 100644
index 00000000000..6cd91269d43
--- /dev/null
+++ b/include/configs/scb9328.h
@@ -0,0 +1,357 @@
+/*
+ * Copyright (C) 2003 ETC s.r.o.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Written by Peter Figuli <peposh@etc.sk>, 2003.
+ *
+ * 2003/13/06 Initial MP10 Support copied from wepep250
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
+#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
+#define CONFIG_SCB9328 1 /* on a scb9328tronix board */
+#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
+
+#define CONFIG_IMX_SERIAL1
+/*
+ * Select serial console configuration
+ */
+
+
+/*
+ * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
+ * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
+ * functionality or size of u-boot code.
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ & ~CFG_CMD_LOADS \
+ & ~CFG_CMD_CONSOLE \
+ & ~CFG_CMD_AUTOSCRIPT \
+ | CFG_CMD_NET \
+ | CFG_CMD_PING \
+ | CFG_CMD_DHCP \
+ )
+
+#include <cmd_confdefs.h>
+
+/*
+ * Boot options. Setting delay to -1 stops autostart count down.
+ * NOTE: Sending parameters to kernel depends on kernel version and
+ * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
+ * parameters at all! Do not get confused by them so.
+ */
+#define CONFIG_BOOTDELAY -1
+#define CONFIG_BOOTARGS "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328"
+#define CONFIG_BOOTCOMMAND "bootm 10040000"
+#define CONFIG_SHOW_BOOT_PROGRESS
+#define CONFIG_ETHADDR 80:81:82:83:84:85
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_IPADDR 10.10.10.9
+#define CONFIG_SERVERIP 10.10.10.10
+
+/*
+ * General options for u-boot. Modify to save memory foot print
+ */
+#define CFG_LONGHELP /* undef saves memory */
+#define CFG_PROMPT "scb9328> " /* prompt string */
+#define CFG_CBSIZE 256 /* console I/O buffer */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* print buffer size */
+#define CFG_MAXARGS 16 /* max command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* boot args buf size */
+
+#define CFG_MEMTEST_START 0x08100000 /* memtest test area */
+#define CFG_MEMTEST_END 0x08F00000
+
+#undef CFG_CLKS_IN_HZ /* use HZ for freq. display */
+
+#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED 0x141 /* core clock - register value */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BAUDRATE 115200
+/*
+ * Definitions related to passing arguments to kernel.
+ */
+#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
+#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
+#define CONFIG_INITRD_TAG 1 /* send initrd params */
+#undef CONFIG_VFD /* do not send framebuffer setup */
+
+
+/*
+ * Malloc pool need to host env + 128 Kb reserve for other allocations.
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + (128<<10) )
+
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+#define CONFIG_STACKSIZE (120<<10) /* stack size */
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
+#endif
+
+/* SDRAM Setup Values
+0x910a8300 Precharge Command CAS 3
+0x910a8200 Precharge Command CAS 2
+
+0xa10a8300 AutoRefresh Command CAS 3
+0xa10a8200 Set AutoRefresh Command CAS 2 */
+
+#define PRECHARGE_CMD 0x910a8200
+#define AUTOREFRESH_CMD 0xa10a8200
+#define CONFIG_INIT_CRITICAL
+
+/*
+ * SDRAM Memory Map
+ */
+/* SH FIXME */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
+#define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1 */
+#define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */
+
+/*
+ * Flash Controller settings
+ */
+
+/*
+ * Hardware drivers
+ */
+
+
+/*
+ * Configuration for FLASH memory for the Synertronixx board
+ */
+
+/* #define SCB9328_FLASH_32M */
+
+/* 32MB */
+#ifdef SCB9328_FLASH_32M
+#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */
+#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
+#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
+#define SCB9328_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank */
+#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
+#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */
+#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */
+#else
+
+/* 16MB */
+#define CFG_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
+#define CFG_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
+#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
+#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
+#define SCB9328_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank */
+#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
+#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */
+#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */
+#endif /* SCB9328_FLASH_32M */
+
+/* This should be defined if CFI FLASH device is present. Actually benefit
+ is not so clear to me. In other words we can provide more informations
+ to user, but this expects more complex flash handling we do not provide
+ now.*/
+#undef CFG_FLASH_CFI
+
+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* timeout for Erase operation */
+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* timeout for Write operation */
+
+#define CFG_FLASH_BASE SCB9328_FLASH_BASE
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * Right now there is no gain for user, but later on booting kernel might be
+ * possible. Consider using XIP kernel running from flash to save RAM
+ * footprint.
+ * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ */
+#define CFG_JFFS2_FIRST_BANK 0
+#define CFG_JFFS2_FIRST_SECTOR 5
+#define CFG_JFFS2_NUM_BANKS 1
+
+/*
+ * Environment setup. Definitions of monitor location and size with
+ * definition of environment setup ends up in 2 possibilities.
+ * 1. Embeded environment - in u-boot code is space for environment
+ * 2. Environment is read from predefined sector of flash
+ * Right now we support 2. possiblity, but expecting no env placed
+ * on mentioned address right now. This also needs to provide whole
+ * sector for it - for us 256Kb is really waste of memory. U-boot uses
+ * default env. and until kernel parameters could be sent to kernel
+ * env. has no sense to us.
+ */
+
+/* Setup for PA23 which is Reset Default PA23 but has to become
+ CS5 */
+
+#define CFG_GPR_A_VAL 0x00800000
+#define CFG_GIUS_A_VAL 0x0043fffe
+
+#define CFG_MONITOR_BASE 0x10000000
+#define CFG_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0x10020000 /* absolute address for now */
+#define CFG_ENV_SIZE 0x20000
+
+#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */
+
+/*
+ * CSxU_VAL:
+ * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32
+ * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC |
+ *
+ * CSxL_VAL:
+ * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0
+ * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN|
+ */
+
+#define CFG_CS0U_VAL 0x000F2000
+#define CFG_CS0L_VAL 0x11110d01
+#define CFG_CS1U_VAL 0x000F0a00
+#define CFG_CS1L_VAL 0x11110601
+#define CFG_CS2U_VAL 0x0
+#define CFG_CS2L_VAL 0x0
+
+#define CFG_CS3U_VAL 0x000FFFFF
+#define CFG_CS3L_VAL 0x00000303
+
+#define CFG_CS4U_VAL 0x000F0a00
+#define CFG_CS4L_VAL 0x11110301
+
+/* CNC == 3 too long
+ #define CFG_CS5U_VAL 0x0000C210 */
+
+/* #define CFG_CS5U_VAL 0x00008400
+ mal laenger mahcen, ob der bei 150MHz laenger haelt dann und
+ kaum langsamer ist */
+/* #define CFG_CS5U_VAL 0x00009400
+ #define CFG_CS5L_VAL 0x11010D03 */
+
+#define CFG_CS5U_VAL 0x00008400
+#define CFG_CS5L_VAL 0x00000D03
+
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DM9000_BASE 0x16000000
+#define DM9000_IO CONFIG_DM9000_BASE
+#define DM9000_DATA (CONFIG_DM9000_BASE+4)
+/* #define CONFIG_DM9000_USE_8BIT */
+#define CONFIG_DM9000_USE_16BIT
+/* #define CONFIG_DM9000_USE_32BIT */
+
+/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
+ f_ref=16,777MHz
+
+ 0x002a141f: 191,9944MHz
+ 0x040b2007: 144MHz
+ 0x042a141f: 96MHz
+ 0x0811140d: 64MHz
+ 0x040e200e: 150MHz
+ 0x00321431: 200MHz
+
+ 0x08001800: 64MHz mit 16er Quarz
+ 0x04001800: 96MHz mit 16er Quarz
+ 0x04002400: 144MHz mit 16er Quarz
+
+ 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
+ |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */
+
+#define CPU200
+
+#ifdef CPU200
+#define CFG_MPCTL0_VAL 0x00321431
+#else
+#define CFG_MPCTL0_VAL 0x040e200e
+#endif
+
+/* #define BUS64 */
+#define BUS72
+
+#ifdef BUS72
+#define CFG_SPCTL0_VAL 0x04002400
+#endif
+
+#ifdef BUS96
+#define CFG_SPCTL0_VAL 0x04001800
+#endif
+
+#ifdef BUS64
+#define CFG_SPCTL0_VAL 0x08001800
+#endif
+
+/* Das ist der BCLK Divider, der aus der System PLL
+ BCLK und HCLK erzeugt:
+ 31 | xxxx xxxx xxxx xxxx xx10 11xx xxxx xxxx | 0
+ 0x2f008403 : 192MHz/2=96MHz, 144MHz/2=72MHz PRESC=1->BCLKDIV=2
+ 0x2f008803 : 192MHz/3=64MHz, 240MHz/3=80MHz PRESC=1->BCLKDIV=2
+ 0x2f001003 : 192MHz/5=38,4MHz
+ 0x2f000003 : 64MHz/1
+ Bit 22: SPLL Restart
+ Bit 21: MPLL Restart */
+
+#ifdef BUS64
+#define CFG_CSCR_VAL 0x2f030003
+#endif
+
+#ifdef BUS72
+#define CFG_CSCR_VAL 0x2f030403
+#endif
+
+/*
+ * Well this has to be defined, but on the other hand it is used differently
+ * one may expect. For instance loadb command do not cares :-)
+ * So advice is - do not relay on this...
+ */
+#define CFG_LOAD_ADDR 0x08400000
+
+#define MHZ16QUARZINUSE
+
+#ifdef MHZ16QUARZINUSE
+#define CONFIG_SYSPLL_CLK_FREQ 16000000
+#else
+#define CONFIG_SYSPLL_CLK_FREQ 16780000
+#endif
+
+#define CONFIG_SYS_CLK_FREQ 16780000
+
+/* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */
+#define CFG_FMCR_VAL 0x00000001
+
+/* Bit[0:3] contain PERCLK1DIV for UART 1
+ 0x000b00b ->b<- -> 192MHz/12=16MHz
+ 0x000b00b ->8<- -> 144MHz/09=16MHz
+ 0x000b00b ->3<- -> 64MHz/4=16MHz */
+
+#ifdef BUS96
+#define CFG_PCDR_VAL 0x000b00b5
+#endif
+
+#ifdef BUS64
+#define CFG_PCDR_VAL 0x000b00b3
+#endif
+
+#ifdef BUS72
+#define CFG_PCDR_VAL 0x000b00b8
+#endif
+
+#endif /* __CONFIG_H */