Convert CONFIG_BOARD_SIZE_LIMIT to Kconfig

This converts the following to Kconfig:
   CONFIG_BOARD_SIZE_LIMIT

To do this, introduce CONFIG_HAS_BOARD_SIZE_LIMIT.

Signed-off-by: Tom Rini <trini@konsulko.com>

21 files changed, 0 insertions, 141 deletions

diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h
index 762d1980bda..bd07b4b031b 100644
--- a/include/configs/bk4r1.h
+++ b/include/configs/bk4r1.h
@@ -62,9 +62,6 @@
 #define CONFIG_SYS_FSL_QSPI_LE
 #endif
 
-/* We boot from the gfxRAM area of the OCRAM. */
-#define CONFIG_BOARD_SIZE_LIMIT		520192
-
 /* boot command, including the target-defined one if any */
 
 /* Extra env settings (including the target-defined ones if any) */
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
index 99645f3f7ad..a5ba916279a 100644
--- a/include/configs/colibri_pxa270.h
+++ b/include/configs/colibri_pxa270.h
@@ -12,8 +12,6 @@
 /*
  * High Level Board Configuration Options
  */
-/* Avoid overwriting factory configuration block */
-#define CONFIG_BOARD_SIZE_LIMIT		0x40000
 
 /*
  * Environment settings
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 2e7b640357e..24851494f5c 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -23,9 +23,6 @@
 
 #define CONFIG_FDTADDR			0x84000000
 
-/* We boot from the gfxRAM area of the OCRAM. */
-#define CONFIG_BOARD_SIZE_LIMIT		520192
-
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x82000000\0" \
diff --git a/include/configs/ea-lpc3250devkitv2.h b/include/configs/ea-lpc3250devkitv2.h
index 220c3c44d6b..2d0e7878799 100644
--- a/include/configs/ea-lpc3250devkitv2.h
+++ b/include/configs/ea-lpc3250devkitv2.h
@@ -11,11 +11,6 @@
 #include <asm/arch/cpu.h>
 
 /*
- * SoC and board defines
- */
-#define CONFIG_BOARD_SIZE_LIMIT 0x000fffff /* maximum allowable size for full U-Boot binary */
-
-/*
  * RAM
  */
 #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE
diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h
index 8b80841cdb6..269bb93272c 100644
--- a/include/configs/gardena-smart-gateway-mt7688.h
+++ b/include/configs/gardena-smart-gateway-mt7688.h
@@ -46,10 +46,4 @@
 
 /* Environment settings */
 
-/*
- * Environment is right behind U-Boot in flash. Make sure U-Boot
- * doesn't grow into the environment area.
- */
-#define CONFIG_BOARD_SIZE_LIMIT		CONFIG_ENV_OFFSET
-
 #endif /* __CONFIG_GARDENA_SMART_GATEWAY_H */
diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
index 25c5a97c69d..d5655e4ada6 100644
--- a/include/configs/guruplug.h
+++ b/include/configs/guruplug.h
@@ -18,11 +18,6 @@
  * max 4k env size is enough, but in case of nand
  * it has to be rounded to sector size
  */
-/*
- * Environment is right behind U-Boot in flash. Make sure U-Boot
- * doesn't grow into the environment area.
- */
-#define CONFIG_BOARD_SIZE_LIMIT		CONFIG_ENV_OFFSET
 
 /*
  * Default environment variables
diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h
index 4a19fb881da..86bad6fa036 100644
--- a/include/configs/linkit-smart-7688.h
+++ b/include/configs/linkit-smart-7688.h
@@ -47,10 +47,4 @@
 
 /* Environment settings */
 
-/*
- * Environment is right behind U-Boot in flash. Make sure U-Boot
- * doesn't grow into the environment area.
- */
-#define CONFIG_BOARD_SIZE_LIMIT		CONFIG_ENV_OFFSET
-
 #endif /* __CONFIG_LINKIT_SMART_7688_H */
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index f299cc06d32..ccfe292f6c6 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -130,17 +130,4 @@
  * environment organization
  */
 
-/*
- * Environment starts at CONFIG_ENV_OFFSET=0xC0000 = 768k = 768 * 1024 = 786432
- *
- * Detect overlap between U-Boot image and environment area in build-time
- *
- * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset
- * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
- *
- * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
- * write the direct value here
- */
-#define CONFIG_BOARD_SIZE_LIMIT		785408
-
 #endif
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 43455aa531f..8b9f0a29017 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -106,18 +106,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* Environment starts at 768k = 768 * 1024 = 786432 */
-/*
- * Detect overlap between U-Boot image and environment area in build-time
- *
- * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset
- * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
- *
- * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
- * write the direct value here
- */
-#define CONFIG_BOARD_SIZE_LIMIT		785408
-
 #ifdef CONFIG_CMD_SATA
 	#define CONFIG_DWC_AHSATA_PORT_ID       0
 	#define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h
index d3ba1449279..ce6afcde2a0 100644
--- a/include/configs/mx7ulp_com.h
+++ b/include/configs/mx7ulp_com.h
@@ -17,16 +17,6 @@
 
 #define CONFIG_SYS_BOOTM_LEN		0x1000000
 
-/*
- * Detect overlap between U-Boot image and environment area in build-time
- *
- * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot-dtb.imx offset
- * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
- *
- * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
- * write the direct value here
- */
-#define CONFIG_BOARD_SIZE_LIMIT		785408
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"
 
 /* Using ULP WDOG for reset */
diff --git a/include/configs/openrd.h b/include/configs/openrd.h
index 7dad002f3b8..006f06e6af5 100644
--- a/include/configs/openrd.h
+++ b/include/configs/openrd.h
@@ -22,11 +22,6 @@
  * max 4k env size is enough, but in case of nand
  * it has to be rounded to sector size
  */
-/*
- * Environment is right behind U-Boot in flash. Make sure U-Boot
- * doesn't grow into the environment area.
- */
-#define CONFIG_BOARD_SIZE_LIMIT		CONFIG_ENV_OFFSET
 
 /*
  * Default environment variables
diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index fd4a0b1aa86..79b69dfe175 100644
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -16,9 +16,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 
-/* We boot from the gfxRAM area of the OCRAM. */
-#define CONFIG_BOARD_SIZE_LIMIT		520192
-
 /* if no target-specific extra environment settings were defined by the
    target, define an empty one */
 #ifndef PCM052_EXTRA_ENV_SETTINGS
diff --git a/include/configs/pico-imx6.h b/include/configs/pico-imx6.h
index 536e07b4da8..855d7993486 100644
--- a/include/configs/pico-imx6.h
+++ b/include/configs/pico-imx6.h
@@ -116,18 +116,6 @@
 
 /* Environment organization */
 
-/* Environment starts at 768k = 768 * 1024 = 786432 */
-/*
- * Detect overlap between U-Boot image and environment area in build-time
- *
- * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset
- * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776
- *
- * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
- * write the direct value here
- */
-#define CONFIG_BOARD_SIZE_LIMIT		715776
-
 /* Ethernet Configuration */
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR		1
diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index 2646f19cef7..39be4335709 100644
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -116,17 +116,6 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* environment organization */
-/* Environment starts at 768k = 768 * 1024 = 786432 */
-/*
- * Detect overlap between U-Boot image and environment area in build-time
- *
- * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset
- * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776
- *
- * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
- * write the direct value here
- */
-#define CONFIG_BOARD_SIZE_LIMIT		715776
 
 #ifdef CONFIG_DM_VIDEO
 #define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index a90befc0116..06fd78f9da6 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -122,16 +122,6 @@
 /* FLASH and environment organization */
 
 /* Environment starts at 768k = 768 * 1024 = 786432 */
-/*
- * Detect overlap between U-Boot image and environment area in build-time
- *
- * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.img offset
- * CONFIG_BOARD_SIZE_LIMIT = 768k - 69k = 699k = 715776
- *
- * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
- * write the direct value here
- */
-#define CONFIG_BOARD_SIZE_LIMIT		715776
 
 #define CONFIG_SYS_FSL_USDHC_NUM		2
 
diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h
index 2422f037920..c3759ed19bf 100644
--- a/include/configs/rcar-gen3-common.h
+++ b/include/configs/rcar-gen3-common.h
@@ -44,9 +44,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(1 * 1024 * 1024)
 #define CONFIG_SYS_BOOTM_LEN		(64 << 20)
 
-/* The HF/QSPI layout permits up to 1 MiB large bootloader blob */
-#define CONFIG_BOARD_SIZE_LIMIT		1048576
-
 /* ENV setting */
 
 #define CONFIG_EXTRA_ENV_SETTINGS	\
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index 4499a63aed2..0cc58c3a7d9 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -18,11 +18,6 @@
  * max 4k env size is enough, but in case of nand
  * it has to be rounded to sector size
  */
-/*
- * Environment is right behind U-Boot in flash. Make sure U-Boot
- * doesn't grow into the environment area.
- */
-#define CONFIG_BOARD_SIZE_LIMIT		CONFIG_ENV_OFFSET
 
 /*
  * Default environment variables
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index c467e9bd15b..a9031035d74 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -98,15 +98,6 @@
 /* mmc config */
 #define CONFIG_MMC_SUNXI_SLOT		0
 
-#if defined(CONFIG_ENV_IS_IN_MMC)
-/*
- * This is actually (CONFIG_ENV_OFFSET -
- * (CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)), but the value will be used
- * directly in a makefile, without the preprocessor expansion.
- */
-#define CONFIG_BOARD_SIZE_LIMIT		0x7e000
-#endif
-
 #define CONFIG_SYS_MMC_MAX_DEVICE	4
 
 /*
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 065b406e2e7..b7a94812f35 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -55,8 +55,6 @@
 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 #endif /* CONFIG_CMD_USB      */
 
-#define CONFIG_BOARD_SIZE_LIMIT		392192 /* (CONFIG_ENV_OFFSET - 1024) */
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index ebae8223fe2..db7c8be7ce0 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -29,9 +29,6 @@
 /* I2C Configs */
 #define CONFIG_SYS_SPD_BUS_NUM		0
 
-/* We boot from the gfxRAM area of the OCRAM. */
-#define CONFIG_BOARD_SIZE_LIMIT		520192
-
 /*
  * We do have 128MB of memory on the Vybrid Tower board. Leave the last
  * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 83ee1784ce9..b3c9f14c8f4 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -94,19 +94,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/*
- * Environment starts at CONFIG_ENV_OFFSET= 0xC0000 = 768k = 768*1024 = 786432
- *
- * Detect overlap between U-Boot image and environment area in build-time
- *
- * CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset
- * CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
- *
- * Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
- * write the direct value here
- */
-#define CONFIG_BOARD_SIZE_LIMIT		785408
-
 /* environment organization */
 
 #define CONFIG_SYS_FSL_USDHC_NUM	1