rename CFG_ macros to CONFIG_SYS

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

1 files changed, 49 insertions, 49 deletions

diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h
index 4f3f8e53753..f85d5d66959 100644
--- a/include/configs/r7780mp.h
+++ b/include/configs/r7780mp.h
@@ -31,7 +31,7 @@
 #define CONFIG_SH4A		1
 #define CONFIG_CPU_SH7780	1
 #define CONFIG_R7780MP		1
-#define CFG_R7780MP_OLD_FLASH	1
+#define CONFIG_SYS_R7780MP_OLD_FLASH	1
 #define __LITTLE_ENDIAN__ 1
 
 /*
@@ -60,69 +60,69 @@
 /* check for keypress on bootdelay==0 */
 /*#define CONFIG_ZERO_BOOTDELAY_CHECK*/
 
-#define CFG_SDRAM_BASE		(0x08000000)
-#define CFG_SDRAM_SIZE		(128 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_BASE		(0x08000000)
+#define CONFIG_SYS_SDRAM_SIZE		(128 * 1024 * 1024)
 
-#define CFG_LONGHELP
-#define CFG_PROMPT		"=> "
-#define CFG_CBSIZE		256
-#define CFG_PBSIZE		256
-#define CFG_MAXARGS		16
-#define CFG_BARGSIZE	512
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"=> "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		256
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE	512
 /* List of legal baudrate settings for this board */
-#define CFG_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200, 57600, 38400, 19200, 9600 }
 
-#define CFG_MEMTEST_START	(CFG_SDRAM_BASE)
-#define CFG_MEMTEST_END		(TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(TEXT_BASE - 0x100000)
 
 /* Flash board support */
-#define CFG_FLASH_BASE		(0xA0000000)
-#ifdef CFG_R7780MP_OLD_FLASH
+#define CONFIG_SYS_FLASH_BASE		(0xA0000000)
+#ifdef CONFIG_SYS_R7780MP_OLD_FLASH
 /* NOR Flash (S29PL127J60TFI130) */
-# define CFG_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
-# define CFG_MAX_FLASH_BANKS	(2)
-# define CFG_MAX_FLASH_SECT	270
-# define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE,\
-				CFG_FLASH_BASE + 0x100000,\
-				CFG_FLASH_BASE + 0x400000,\
-				CFG_FLASH_BASE + 0x700000, }
-#else /* CFG_R7780MP_OLD_FLASH */
+# define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
+# define CONFIG_SYS_MAX_FLASH_BANKS	(2)
+# define CONFIG_SYS_MAX_FLASH_SECT	270
+# define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE,\
+				CONFIG_SYS_FLASH_BASE + 0x100000,\
+				CONFIG_SYS_FLASH_BASE + 0x400000,\
+				CONFIG_SYS_FLASH_BASE + 0x700000, }
+#else /* CONFIG_SYS_R7780MP_OLD_FLASH */
 /* NOR Flash (Spantion S29GL256P) */
-# define CFG_MAX_FLASH_BANKS	(1)
-# define CFG_MAX_FLASH_SECT		256
-# define CFG_FLASH_BANKS_LIST	{ CFG_FLASH_BASE }
-#endif /* CFG_R7780MP_OLD_FLASH */
+# define CONFIG_SYS_MAX_FLASH_BANKS	(1)
+# define CONFIG_SYS_MAX_FLASH_SECT		256
+# define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#endif /* CONFIG_SYS_R7780MP_OLD_FLASH */
 
-#define CFG_LOAD_ADDR		(CFG_SDRAM_BASE + 4 * 1024 * 1024)
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
 /* Address of u-boot image in Flash */
-#define CFG_MONITOR_BASE	(CFG_FLASH_BASE)
-#define CFG_MONITOR_LEN		(256 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
 /* Size of DRAM reserved for malloc() use */
-#define CFG_MALLOC_LEN		(1204 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(1204 * 1024)
 
 /* size in bytes reserved for initial data */
-#define CFG_GBL_DATA_SIZE	(256)
-#define CFG_BOOTMAPSZ		(8 * 1024 * 1024)
-#define CFG_RX_ETH_BUFFER	(8)
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+#define CONFIG_SYS_RX_ETH_BUFFER	(8)
 
-#define CFG_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#undef CFG_FLASH_CFI_BROKEN_TABLE
-#undef  CFG_FLASH_QUIET_TEST
+#undef CONFIG_SYS_FLASH_CFI_BROKEN_TABLE
+#undef  CONFIG_SYS_FLASH_QUIET_TEST
 /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_EMPTY_INFO
 
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_SECT_SIZE	(256 * 1024)
 #define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-#define CFG_FLASH_ERASE_TOUT	120000
-#define CFG_FLASH_WRITE_TOUT	500
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500
 
 /* Board Clock */
 #define CONFIG_SYS_CLK_FREQ	33333333
 #define TMU_CLK_DIVIDER		4
-#define CFG_HZ	(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
+#define CONFIG_SYS_HZ	(CONFIG_SYS_CLK_FREQ / TMU_CLK_DIVIDER)
 
 /* PCI Controller */
 #if defined(CONFIG_CMD_PCI)
@@ -157,14 +157,14 @@
 /* Compact flash Support */
 #if defined(CONFIG_CMD_IDE)
 #define CONFIG_IDE_RESET        1
-#define CFG_PIO_MODE            1
-#define CFG_IDE_MAXBUS          1   /* IDE bus */
-#define CFG_IDE_MAXDEVICE       1
-#define CFG_ATA_BASE_ADDR       0xb4000000
-#define CFG_ATA_STRIDE          2               /* 1bit shift */
-#define CFG_ATA_DATA_OFFSET     0x1000          /* data reg offset */
-#define CFG_ATA_REG_OFFSET      0x1000          /* reg offset */
-#define CFG_ATA_ALT_OFFSET      0x800           /* alternate register offset */
+#define CONFIG_SYS_PIO_MODE            1
+#define CONFIG_SYS_IDE_MAXBUS          1   /* IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE       1
+#define CONFIG_SYS_ATA_BASE_ADDR       0xb4000000
+#define CONFIG_SYS_ATA_STRIDE          2               /* 1bit shift */
+#define CONFIG_SYS_ATA_DATA_OFFSET     0x1000          /* data reg offset */
+#define CONFIG_SYS_ATA_REG_OFFSET      0x1000          /* reg offset */
+#define CONFIG_SYS_ATA_ALT_OFFSET      0x800           /* alternate register offset */
 #endif /* CONFIG_CMD_IDE */
 
 #endif /* __R7780RP_H */