MLK-18156-2 mx6ullevk: Update board level codes

To align with v2020.04, add functions:
1. Support GPMI NAND
2. Support LCD splash screen
3. Add 9x9 EVK board support with LPDDR2 used
4. Update PMIC and LDO bypass for 9x9 EVK
5. Support two ethernet controllers

Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 154d6c905a848eed3bcc1ae2e142da3508a61b92)
(cherry picked from commit e7617471ab33579da972db82e042937233c857fa)
(cherry picked from commit 1df176a9b18d5e16e445307e6702822d9a8fa9f8)
(cherry picked from commit 0b5078707c962324cbfdd10290f2e0953c2566cd)
(cherry picked from commit ca108894bb9053dff5214e8dfdd1d347bcaa9ef4)

1 files changed, 87 insertions, 18 deletions

diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h
index 6bcca11c4c2..8c7be40e0f8 100644
--- a/include/configs/mx6ullevk.h
+++ b/include/configs/mx6ullevk.h
@@ -14,7 +14,17 @@
 #include "mx6_common.h"
 #include <asm/mach-imx/gpio.h>
 
-#define PHYS_SDRAM_SIZE	SZ_512M
+#define is_mx6ull_9x9_evk()	CONFIG_IS_ENABLED(TARGET_MX6ULL_9X9_EVK)
+
+#ifdef CONFIG_TARGET_MX6ULL_9X9_EVK
+#define PHYS_SDRAM_SIZE		SZ_256M
+#define BOOTARGS_CMA_SIZE   "cma=96M "
+#else
+#define PHYS_SDRAM_SIZE		SZ_512M
+#define BOOTARGS_CMA_SIZE   ""
+/* DCDC used on 14x14 EVK, no PMIC */
+#undef CONFIG_LDO_BYPASS_CHECK
+#endif
 
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
@@ -23,14 +33,55 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
 
 /* NAND pin conflicts with usdhc2 */
-#ifdef CONFIG_SYS_USE_NAND
+#ifdef CONFIG_NAND_MXS
 #define CONFIG_SYS_FSL_USDHC_NUM	1
 #else
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #endif
+
 #endif
 
+
+#ifdef CONFIG_NAND_BOOT
+#define MFG_NAND_PARTITION "mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),1m(misc),-(rootfs) "
+#else
+#define MFG_NAND_PARTITION ""
+#endif
+
+#define CONFIG_MFG_ENV_SETTINGS \
+	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+	    BOOTARGS_CMA_SIZE \
+		"rdinit=/linuxrc " \
+		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+		"g_mass_storage.file=/fat g_mass_storage.ro=1 " \
+		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+		"g_mass_storage.iSerialNumber=\"\" "\
+		MFG_NAND_PARTITION \
+		"clk_ignore_unused "\
+		"\0" \
+	"initrd_addr=0x83800000\0" \
+	"initrd_high=0xffffffff\0" \
+	"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
+
+#if defined(CONFIG_NAND_BOOT)
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	CONFIG_MFG_ENV_SETTINGS \
+	"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
+	"fdt_addr=0x83000000\0" \
+	"fdt_high=0xffffffff\0"	  \
+	"console=ttymxc0\0" \
+	"bootargs=console=ttymxc0,115200 ubi.mtd=4 "  \
+		"root=ubi0:rootfs rootfstype=ubifs "		     \
+		BOOTARGS_CMA_SIZE \
+		"mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),1m(misc),-(rootfs)\0"\
+	"bootcmd=nand read ${loadaddr} 0x4000000 0xc00000;"\
+		"nand read ${fdt_addr} 0x5000000 0x100000;"\
+		"bootz ${loadaddr} - ${fdt_addr}\0"
+
+#else
 #define CONFIG_EXTRA_ENV_SETTINGS \
+	CONFIG_MFG_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"image=zImage\0" \
 	"console=ttymxc0\0" \
@@ -40,12 +91,14 @@
 	"fdt_addr=0x83000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
+	"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	"videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
 	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 	"mmcpart=1\0" \
 	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 	"mmcautodetect=yes\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		BOOTARGS_CMA_SIZE \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
@@ -68,17 +121,8 @@
 		"else " \
 			"bootz; " \
 		"fi;\0" \
-		"findfdt="\
-			"if test $fdt_file = undefined; then " \
-				"if test $board_name = ULZ-EVK && test $board_rev = 14X14; then " \
-					"setenv fdt_file imx6ulz-14x14-evk.dtb; fi; " \
-				"if test $board_name = EVK && test $board_rev = 14X14; then " \
-					"setenv fdt_file imx6ull-14x14-evk.dtb; fi; " \
-				"if test $fdt_file = undefined; then " \
-					"echo WARNING: Could not determine dtb to use; " \
-				"fi; " \
-			"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
+		BOOTARGS_CMA_SIZE \
 		"root=/dev/nfs " \
 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 		"netboot=echo Booting from net ...; " \
@@ -102,6 +146,20 @@
 		"else " \
 			"bootz; " \
 		"fi;\0" \
+		"findfdt="\
+			"if test $fdt_file = undefined; then " \
+				"if test $board_name = ULZ-EVK && test $board_rev = 14X14; then " \
+					"setenv fdt_file imx6ulz-14x14-evk.dtb; fi; " \
+				"if test $board_name = EVK && test $board_rev = 9X9; then " \
+					"setenv fdt_file imx6ull-9x9-evk.dtb; fi; " \
+				"if test $board_name = EVK && test $board_rev = 14X14; then " \
+					"setenv fdt_file imx6ull-14x14-evk.dtb; fi; " \
+				"if test $fdt_file = undefined; then " \
+					"echo WARNING: Could not determine dtb to use; " \
+				"fi; " \
+			"fi;\0" \
+
+#endif
 
 /* Miscellaneous configurable options */
 
@@ -122,13 +180,24 @@
 
 #define CONFIG_IOMUX_LPSR
 
-#ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_ENET_DEV		1
-#if (CONFIG_FEC_ENET_DEV == 0)
-#define CONFIG_ETHPRIME			"eth0"
-#elif (CONFIG_FEC_ENET_DEV == 1)
-#define CONFIG_ETHPRIME			"eth1"
+/* NAND stuff */
+#ifdef CONFIG_NAND_MXS
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+
+/* DMA stuff, needed for GPMI/MXS NAND support */
 #endif
+
+/* USB Configs */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS   0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #endif
 
+#define CONFIG_FEC_XCV_TYPE             RMII
+#define CONFIG_ETHPRIME			"eth1"
+
 #endif