summaryrefslogtreecommitdiff
path: root/include/configs/lx2160aqds.h
diff options
context:
space:
mode:
authorPankaj Bansal <pankaj.bansal@nxp.com>2019-02-08 10:29:58 +0000
committerPrabhakar Kushwaha <prabhakar.kushwaha@nxp.com>2019-02-19 10:26:44 +0530
commit1eba723c724b974baffade4def1f7b14d38e6a7c (patch)
tree8466b54dc8943900ac24f6091738fc48659bd161 /include/configs/lx2160aqds.h
parentedc975b8aa33f8afafd45f14b4e00afa3cc0f72b (diff)
lx2160aqds : Add support for LX2160AQDS platform
LX2160AQDS is a development board that supports LX2160A family SoCs. This patch add base support for this board. Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> [PK: Sqaush patch for "secure boot defconfig" & add maintainer] Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Diffstat (limited to 'include/configs/lx2160aqds.h')
-rw-r--r--include/configs/lx2160aqds.h140
1 files changed, 140 insertions, 0 deletions
diff --git a/include/configs/lx2160aqds.h b/include/configs/lx2160aqds.h
new file mode 100644
index 0000000000..662e601f0f
--- /dev/null
+++ b/include/configs/lx2160aqds.h
@@ -0,0 +1,140 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#ifndef __LX2_QDS_H
+#define __LX2_QDS_H
+
+#include "lx2160a_common.h"
+
+/* Qixis */
+#define QIXIS_XMAP_MASK 0x07
+#define QIXIS_XMAP_SHIFT 5
+#define QIXIS_RST_CTL_RESET_EN 0x30
+#define QIXIS_LBMAP_DFLTBANK 0x00
+#define QIXIS_LBMAP_ALTBANK 0x20
+#define QIXIS_LBMAP_QSPI 0x00
+#define QIXIS_RCW_SRC_QSPI 0xff
+#define QIXIS_RST_CTL_RESET 0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_LBMAP_MASK 0x0f
+#define QIXIS_LBMAP_SD
+#define QIXIS_RCW_SRC_SD 0x08
+#define NON_EXTENDED_DUTCFG
+#define QIXIS_SDID_MASK 0x07
+#define QIXIS_ESDHC_NO_ADAPTER 0x7
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_100 0x0
+#define QIXIS_SYSCLK_125 0x1
+#define QIXIS_SYSCLK_133 0x2
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_100 0x0
+#define QIXIS_DDRCLK_125 0x1
+#define QIXIS_DDRCLK_133 0x2
+
+#define BRDCFG4_EMI1SEL_MASK 0xF8
+#define BRDCFG4_EMI1SEL_SHIFT 3
+#define BRDCFG4_EMI2SEL_MASK 0x07
+#define BRDCFG4_EMI2SEL_SHIFT 0
+
+/* VID */
+
+#define I2C_MUX_CH_VOL_MONITOR 0xA
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR 0x63
+#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
+#define CONFIG_VID_FLS_ENV "lx2160aqds_vdd_mv"
+#define CONFIG_VID
+
+/* The lowest and highest voltage allowed*/
+#define VDD_MV_MIN 775
+#define VDD_MV_MAX 925
+
+/* PM Bus commands code for LTC3882*/
+#define PMBUS_CMD_PAGE 0x0
+#define PMBUS_CMD_READ_VOUT 0x8B
+#define PMBUS_CMD_PAGE_PLUS_WRITE 0x05
+#define PMBUS_CMD_VOUT_COMMAND 0x21
+#define PWM_CHANNEL0 0x0
+
+#define CONFIG_VOL_MONITOR_LTC3882_SET
+#define CONFIG_VOL_MONITOR_LTC3882_READ
+
+/* RTC */
+#define CONFIG_SYS_RTC_BUS_NUM 0
+#define I2C_MUX_CH_RTC 0xB
+
+/*
+ * MMC
+ */
+#ifdef CONFIG_MMC
+#ifndef __ASSEMBLY__
+u8 qixis_esdhc_detect_quirk(void);
+#endif
+#define CONFIG_ESDHC_DETECT_QUIRK qixis_esdhc_detect_quirk()
+#endif
+
+/* MAC/PHY configuration */
+#if defined(CONFIG_FSL_MC_ENET)
+#define CONFIG_MII
+#define CONFIG_ETHPRIME "DPMAC17@rgmii-id"
+
+#define AQ_PHY_ADDR1 0x00
+#define AQ_PHY_ADDR2 0x01
+#define AQ_PHY_ADDR3 0x02
+#define AQ_PHY_ADDR4 0x03
+
+#define CORTINA_NO_FW_UPLOAD
+#define CORTINA_PHY_ADDR1 0x0
+
+#define INPHI_PHY_ADDR1 0x0
+#define INPHI_PHY_ADDR2 0x1
+
+#define RGMII_PHY_ADDR1 0x01
+#define RGMII_PHY_ADDR2 0x02
+
+#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
+#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
+#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
+#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
+
+#endif
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ EXTRA_ENV_SETTINGS \
+ "lx2160aqds_vdd_mv=800\0" \
+ "BOARD=lx2160aqds\0" \
+ "xspi_bootcmd=echo Trying load from flexspi..;" \
+ "sf probe 0:0 && sf read $load_addr " \
+ "$kernel_start $kernel_size ; env exists secureboot &&" \
+ "sf read $kernelheader_addr_r $kernelheader_start " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ " bootm $load_addr#$BOARD\0" \
+ "sd_bootcmd=echo Trying load from sd card..;" \
+ "mmcinfo; mmc read $load_addr " \
+ "$kernel_addr_sd $kernel_size_sd ;" \
+ "env exists secureboot && mmc read $kernelheader_addr_r "\
+ "$kernelhdr_addr_sd $kernelhdr_size_sd " \
+ " && esbc_validate ${kernelheader_addr_r};" \
+ "bootm $load_addr#$BOARD\0"
+
+#include <asm/fsl_secure_boot.h>
+
+#endif /* __LX2_QDS_H */