keymile boards: move keymile specific header in subdir

Collect all keymile specific common headers in include/configs/km.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Kim Phillips <kim.phillips@freescale.com>
cc: Holger Brunck <holger.brunck@keymile.com>

1 files changed, 0 insertions, 266 deletions

diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
deleted file mode 100644
index add5624bfc..0000000000
--- a/include/configs/km_arm.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Prafulla Wadaskar <prafulla@marvell.com>
- *
- * (C) Copyright 2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2010-2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/*
- * for linking errors see
- * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
- */
-
-#ifndef _CONFIG_KM_ARM_H
-#define _CONFIG_KM_ARM_H
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_MARVELL
-#define CONFIG_ARM926EJS		/* Basic Architecture */
-#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
-#define CONFIG_KIRKWOOD			/* SOC Family Name */
-#define CONFIG_KW88F6281		/* SOC Name */
-#define CONFIG_MACH_KM_KIRKWOOD		/* Machine type */
-
-/* include common defines/options for all Keymile boards */
-#include "keymile-common.h"
-
-#define CONFIG_SYS_TEXT_BASE	0x04000000	/* code address after reloc */
-#define CONFIG_ENV_SIZE		(128 << 10)	/* NAND chip block size	*/
-#define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
-#define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
-#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
-
-/* pseudo-non volatile RAM [hex] */
-#define CONFIG_KM_PNVRAM	0x80000
-/* physical RAM MTD size [hex] */
-#define CONFIG_KM_PHRAM		0x17F000
-
-#define CONFIG_KM_CRAMFS_ADDR	0x2400000
-#define CONFIG_KM_KERNEL_ADDR	0x2000000	/* 4096KBytes */
-
-#define CONFIG_KM_DEF_ENV_CPU						\
-	"addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"boot=bootm ${actual_kernel_addr} - -\0"			\
-	"cramfsloadfdt=echo \\\\c\0"					\
-	"tftpfdt=echo \\\\c\0"						\
-	CONFIG_KM_DEF_ENV_UPDATE					\
-	""
-
-
-
-#define CONFIG_MD5	/* get_random_hex on krikwood needs MD5 support */
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#undef  CONFIG_KIRKWOOD_PCIE_INIT	/* Disable PCIE Port0 for kernel */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-
-#define CONFIG_MISC_INIT_R
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-/*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-#define CONFIG_CONS_INDEX	1	/* Console on UART0 */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_BOOTMAPSZ	(8 << 20)	/* Initial Memmap for Linux */
-#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG		/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */
-
-/*
- * Commands configuration
- */
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NFS
-
-/*
- * Without NOR FLASH we need this
- */
-#define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-
-/*
- * NAND Flash configuration
- */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			1
-#define CONFIG_NAND_KIRKWOOD
-#define CONFIG_SYS_NAND_BASE		0xd8000000
-
-#define BOOTFLASH_START		0x0
-
-#define CONFIG_KM_CONSOLE_TTY	"ttyS0"
-
-/* size in bytes reserved for initial data */
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_CONSOLE_INFO_QUIET	/* some code reduction */
-#define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
-#define CONFIG_ARCH_MISC_INIT		/* call arch_misc_init() */
-#define CONFIG_DISPLAY_CPUINFO		/* Display cpu info */
-#define CONFIG_NR_DRAM_BANKS	4
-#define CONFIG_STACKSIZE	0x00100000	/* regular stack- 1M */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-
-/*
- * Ethernet Driver configuration
- */
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define CONFIG_NET_MULTI	/* specify more that one ports available */
-#define CONFIG_MII		/* expose smi ove miiphy interface */
-#define CONFIG_MVGBE		/* Enable Marvell Gbe Controller Driver */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
-#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
-#define CONFIG_PHY_BASE_ADR	0
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init 88E1118 PHY */
-
-/*
- * UBI related stuff
- */
-#define CONFIG_SYS_USE_UBI
-
-/*
- * I2C related stuff
- */
-#define	CONFIG_SOFT_I2C		/* I2C bit-banged	*/
-
-#define	CONFIG_KIRKWOOD_GPIO		/* Enable GPIO Support */
-#if defined(CONFIG_SOFT_I2C)
-#ifndef __ASSEMBLY__
-#include <asm/arch-kirkwood/gpio.h>
-extern void __set_direction(unsigned pin, int high);
-void set_sda(int state);
-void set_scl(int state);
-int get_sda(void);
-int get_scl(void);
-#define KM_KIRKWOOD_SDA_PIN	8
-#define KM_KIRKWOOD_SCL_PIN	9
-#define KM_KIRKWOOD_ENV_WP	38
-
-#define I2C_ACTIVE	__set_direction(KM_KIRKWOOD_SDA_PIN, 0)
-#define I2C_TRISTATE	__set_direction(KM_KIRKWOOD_SDA_PIN, 1)
-#define I2C_READ	(kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
-#define I2C_SDA(bit)	kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
-#define I2C_SCL(bit)	kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
-#endif
-
-#define I2C_DELAY	udelay(3)	/* 1/4 I2C clock duration */
-#define I2C_SOFT_DECLARATIONS
-
-#define	CONFIG_SYS_I2C_SLAVE		0x0
-#define	CONFIG_SYS_I2C_SPEED		100000
-#endif
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-
-/*
- *  Environment variables configurations
- */
-#define CONFIG_ENV_IS_IN_EEPROM		/* use EEPROM for environment vars */
-#define CONFIG_SYS_DEF_EEPROM_ADDR	0x50
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_EEPROM_WREN
-#define CONFIG_ENV_OFFSET		0x0 /* no bracets! */
-#undef	CONFIG_ENV_SIZE
-#define CONFIG_ENV_SIZE			(0x2000 - CONFIG_ENV_OFFSET)
-#define CONFIG_I2C_ENV_EEPROM_BUS	"pca9547:70:d\0"
-
-/* offset redund: (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET_REDUND	0x2000 /* no bracets! */
-#define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
-
-#define CONFIG_CMD_SF
-
-#define CONFIG_SPI_FLASH
-#define CONFIG_HARD_SPI
-#define CONFIG_KIRKWOOD_SPI
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		50000000	/* 50Mhz */
-
-#define FLASH_GPIO_PIN			0x00010000
-
-#define MTDIDS_DEFAULT		"nand0=orion_nand"
-/* test-only: partitioning needs some tuning, this is just for tests */
-#define MTDPARTS_DEFAULT	"mtdparts="				\
-	"orion_nand:"							\
-		"-(" CONFIG_KM_UBI_PARTITION_NAME ")"
-
-#define	CONFIG_KM_DEF_ENV_UPDATE					\
-	"update="							\
-		"spi on;sf probe 0;sf erase 0 50000;"			\
-		"sf write ${u-boot_addr_r} 0 ${filesize};"		\
-		"spi off\0"
-
-#if defined(CONFIG_SYS_NO_FLASH)
-#define CONFIG_KM_UBI_PARTITION_NAME   "ubi0"
-#undef	CONFIG_FLASH_CFI_MTD
-#undef	CONFIG_JFFS2_CMDLINE
-#endif
-
-/* additions for new relocation code, must be added to all boards */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-/* Kirkwood has 2k of Security SRAM, use it for SP */
-#define CONFIG_SYS_INIT_SP_ADDR		0xC8012000
-/* Do early setups now in board_init_f() */
-#define CONFIG_BOARD_EARLY_INIT_F
-
-/*
- * resereved pram area at the end of memroy [hex]
- * 8Mbytes for switch + 4Kbytes for bootcount
- */
-#define CONFIG_KM_RESERVED_PRAM 0x801000
-/* address for the bootcount (taken from end of RAM) */
-#define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
-
-#endif /* _CONFIG_KM_ARM_H */