MLK-18161-11 imx8qxp_mek: Add i.MX8QXP MEK board support

Add board level codes and configs for i.MX8QXP MEK board.

- Enabled DM driver:
  FEC, LPUART, LPI2C, GPIO, SD/MMC, FSPI, PCA953X, pinctrl, USB host(EHCI/XHCI)
  Power-domain, SC thermal

- Enabled Non-DM driver:
  PCIE, fuse, iomux, video(IMXDPUV1), USB device(CI-UDC), TCPC

- Disabled driver:
  mailbox

- Board defconfigs:
  imx8qxp_mek_defconfig
  imx8qxp_mek_fspi_defconfig

Signed-off-by: Ye Li <ye.li@nxp.com>

1 files changed, 287 insertions, 0 deletions

diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
new file mode 100644
index 0000000000..3241973abf
--- /dev/null
+++ b/include/configs/imx8qxp_mek.h
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2017-2018 NXP
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __IMX8QXP_MEK_H
+#define __IMX8QXP_MEK_H
+
+#include <linux/sizes.h>
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_MISC_INIT
+
+/* Flat Device Tree Definitions */
+#define CONFIG_OF_BOARD_SETUP
+
+#undef CONFIG_CMD_EXPORTENV
+#undef CONFIG_CMD_IMPORTENV
+#undef CONFIG_CMD_IMLS
+
+#undef CONFIG_CMD_CRC32
+#undef CONFIG_BOOTM_NETBSD
+
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR       0
+#define USDHC1_BASE_ADDR                0x5B010000
+#define USDHC2_BASE_ADDR                0x5B020000
+#define CONFIG_SUPPORT_EMMC_BOOT	/* eMMC specific */
+
+#define CONFIG_ENV_OVERWRITE
+
+
+#define CONFIG_FSL_HSIO
+#ifdef CONFIG_FSL_HSIO
+#define CONFIG_PCIE_IMX8X
+#define CONFIG_CMD_PCI
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_PCI_SCAN_SHOW
+#endif
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+/* FUSE command */
+#define CONFIG_CMD_FUSE
+
+/* GPIO configs */
+#define CONFIG_MXC_GPIO
+
+/* ENET Config */
+#define CONFIG_MII
+
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_XCV_TYPE             RGMII
+#define FEC_QUIRK_ENET_MAC
+
+#define CONFIG_PHY_GIGE /* Support for 1000BASE-X */
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
+/* ENET0 connects AR8031 on CPU board, ENET1 connects to base board and MUX with ESAI, default is ESAI */
+#define CONFIG_FEC_ENET_DEV 0
+
+#if (CONFIG_FEC_ENET_DEV == 0)
+#define IMX_FEC_BASE			0x5B040000
+#define CONFIG_FEC_MXC_PHYADDR          0x0
+#define CONFIG_ETHPRIME                 "eth0"
+#elif (CONFIG_FEC_ENET_DEV == 1)
+#define IMX_FEC_BASE			0x5B050000
+#define CONFIG_FEC_MXC_PHYADDR          0x1
+#define CONFIG_ETHPRIME                 "eth1"
+#endif
+
+/* ENET0 MDIO are shared */
+#define CONFIG_FEC_MXC_MDIO_BASE	0x5B040000
+
+#define CONFIG_LIB_RAND
+#define CONFIG_NET_RANDOM_ETHADDR
+
+/* Boot M4 */
+#define M4_BOOT_ENV \
+	"m4_0_image=m4_0.bin\0" \
+	"loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4_0_image}\0" \
+	"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
+
+#ifdef CONFIG_NAND_BOOT
+#define MFG_NAND_PARTITION "mtdparts=gpmi-nand:128m(boot),32m(kernel),16m(dtb),8m(misc),-(rootfs) "
+#else
+#define MFG_NAND_PARTITION ""
+#endif
+
+#define CONFIG_MFG_ENV_SETTINGS \
+	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+		"rdinit=/linuxrc " \
+		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+		"g_mass_storage.iSerialNumber=\"\" "\
+		MFG_NAND_PARTITION \
+		"clk_ignore_unused "\
+		"\0" \
+	"initrd_addr=0x83800000\0" \
+	"initrd_high=0xffffffff\0" \
+	"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	CONFIG_MFG_ENV_SETTINGS \
+	M4_BOOT_ENV \
+	"script=boot.scr\0" \
+	"image=Image\0" \
+	"panel=NULL\0" \
+	"console=ttyLP0,${baudrate} earlycon=lpuart32,0x5a060000,${baudrate}\0" \
+	"fdt_addr=0x83000000\0"			\
+	"fdt_high=0xffffffffffffffff\0"		\
+	"boot_fdt=try\0" \
+	"fdt_file=fsl-imx8qxp-mek.dtb\0" \
+	"initrd_addr=0x83800000\0"		\
+	"initrd_high=0xffffffffffffffff\0" \
+	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+	"mmcautodetect=yes\0" \
+	"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
+	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"booti ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"echo WARN: Cannot load the DT; " \
+			"fi; " \
+		"else " \
+			"echo wait for boot; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console} " \
+		"root=/dev/nfs " \
+		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+	"netboot=echo Booting from net ...; " \
+		"run netargs;  " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${loadaddr} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"booti ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"echo WARN: Cannot load the DT; " \
+			"fi; " \
+		"else " \
+			"booti; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loadimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else booti ${loadaddr} - ${fdt_addr}; fi"
+
+/* Link Definitions */
+#define CONFIG_LOADADDR			0x80280000
+
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
+
+#define CONFIG_SYS_INIT_SP_ADDR         0x80200000
+
+
+/* Default environment is in SD */
+#define CONFIG_ENV_SIZE			0x1000
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_ENV_OFFSET       (4 * 1024 * 1024)
+#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
+#define CONFIG_ENV_SPI_BUS	CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS	CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE	CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ	CONFIG_SF_DEFAULT_SPEED
+#else
+#define CONFIG_ENV_OFFSET       (64 * SZ_64K)
+#define CONFIG_SYS_MMC_ENV_PART		0	/* user area */
+#endif
+
+#define CONFIG_SYS_MMC_IMG_LOAD_PART	1
+
+/* On LPDDR4 board, USDHC1 is for eMMC, USDHC2 is for SD on CPU board
+  */
+#define CONFIG_SYS_MMC_ENV_DEV		1   /* USDHC2 */
+#define CONFIG_MMCROOT			"/dev/mmcblk1p2"  /* USDHC2 */
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		((CONFIG_ENV_SIZE + (32*1024)) * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
+#define CONFIG_NR_DRAM_BANKS		3
+#define PHYS_SDRAM_1			0x80000000
+#define PHYS_SDRAM_2			0x880000000
+#define PHYS_SDRAM_1_SIZE		0x80000000	/* 2 GB */
+/* LPDDR4 board total DDR is 3GB */
+#define PHYS_SDRAM_2_SIZE		0x40000000	/* 1 GB */
+
+/* Serial */
+#define CONFIG_BAUDRATE			115200
+
+/* Monitor Command Prompt */
+#define CONFIG_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
+#define CONFIG_SYS_CBSIZE              2048
+#define CONFIG_SYS_MAXARGS             64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		8000000	/* 8MHz */
+
+#ifndef CONFIG_DM_PCA953X
+#define CONFIG_PCA953X
+#define CONFIG_CMD_PCA953X
+#define CONFIG_CMD_PCA953X_INFO
+#endif
+
+#define CONFIG_IMX_SMMU
+
+/* MT35XU512ABA1G12 has only one Die, so QSPI0 B won't work */
+#ifdef CONFIG_FSL_FSPI
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED	40000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#define FSL_FSPI_FLASH_SIZE		SZ_64M
+#define FSL_FSPI_FLASH_NUM		1
+#define FSPI0_BASE_ADDR			0x5d120000
+#define FSPI0_AMBA_BASE			0
+#define CONFIG_SYS_FSL_FSPI_AHB
+#endif
+
+/* USB Config */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+/* USB OTG controller configs */
+#ifdef CONFIG_USB_EHCI_HCD
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#endif
+#endif /* CONFIG_CMD_USB */
+
+#ifdef CONFIG_USB_GADGET
+#define CONFIG_USBD_HS
+#endif
+
+/* Framebuffer */
+#ifdef CONFIG_VIDEO
+#define CONFIG_VIDEO_IMXDPUV1
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_IMX_VIDEO_SKIP
+#endif
+
+#define CONFIG_OF_SYSTEM_SETUP
+#define BOOTAUX_RESERVED_MEM_BASE 0x88000000
+#define BOOTAUX_RESERVED_MEM_SIZE 0x08000000 /* Reserve from second 128MB */
+
+#endif /* __IMX8QXP_MEK_H */