summaryrefslogtreecommitdiff
path: root/include/configs/ep8260.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2002-11-03 00:07:02 +0000
committerwdenk <wdenk>2002-11-03 00:07:02 +0000
commit5b1d713721c3ea02549940133f09236783dda1f9 (patch)
tree78c0a58b5cc48142617190669a7598e0ca3307dc /include/configs/ep8260.h
parent47d1a6e1ed87fe1fb3d737acdb85f69bc3259522 (diff)
Initial revision
Diffstat (limited to 'include/configs/ep8260.h')
-rw-r--r--include/configs/ep8260.h689
1 files changed, 689 insertions, 0 deletions
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
new file mode 100644
index 00000000000..f6bc5722ac9
--- /dev/null
+++ b/include/configs/ep8260.h
@@ -0,0 +1,689 @@
+/*
+ * (C) Copyright 2002
+ * Frank Panno <fpanno@delphintech.com>, Delphin Technology AG
+ *
+ * This file is based on similar values for other boards found in other
+ * U-Boot config files, and some that I found in the EP8260 manual.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ *
+ * Note: my board is a "SBC 8260 H, V.1.1"
+ * - 64M 60x Bus SDRAM
+ * - 32M Local Bus SDRAM
+ * - 16M Flash (4 x AM29DL323DB90WDI)
+ * - 128k NVRAM with RTC
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* What is the oscillator's (UX2) frequency in Hz? */
+#define CONFIG_8260_CLKIN (66 * 1000 * 1000)
+
+/*-----------------------------------------------------------------------
+ * MODCK_H & MODCLK[1-3] - Ref: Section 9.2 in MPC8206 User Manual
+ *-----------------------------------------------------------------------
+ * What should MODCK_H be? It is dependent on the oscillator
+ * frequency, MODCK[1-3], and desired CPM and core frequencies.
+ * Here are some example values (all frequencies are in MHz):
+ *
+ * MODCK_H MODCK[1-3] Osc CPM Core
+ * ------- ---------- --- --- ----
+ * 0x2 0x2 33 133 133
+ * 0x2 0x3 33 133 166
+ * 0x2 0x4 33 133 200
+ * 0x2 0x5 33 133 233
+ * 0x2 0x6 33 133 266
+ *
+ * 0x5 0x5 66 133 133
+ * 0x5 0x6 66 133 166
+ * 0x5 0x7 66 133 200 *
+ * 0x6 0x0 66 133 233
+ * 0x6 0x1 66 133 266
+ * 0x6 0x2 66 133 300
+ */
+#define CFG_SBC_MODCK_H 0x05
+
+/* Define this if you want to boot from 0x00000100. If you don't define
+ * this, you will need to program the bootloader to 0xfff00000, and
+ * get the hardware reset config words at 0xfe000000. The simplest
+ * way to do that is to program the bootloader at both addresses.
+ * It is suggested that you just let U-Boot live at 0x00000000.
+ */
+/* #define CFG_SBC_BOOT_LOW 1 */ /* only for HRCW */
+/* #undef CFG_SBC_BOOT_LOW */
+
+/* The reset command will not work as expected if the reset address does
+ * not point to the correct address.
+ */
+
+#define CFG_RESET_ADDRESS 0xFFF00100
+
+/* What should the base address of the main FLASH be and how big is
+ * it (in MBytes)? This must contain TEXT_BASE from board/ep8260/config.mk
+ * The main FLASH is whichever is connected to *CS0. U-Boot expects
+ * this to be the SIMM.
+ */
+#define CFG_FLASH0_BASE 0xFF000000
+#define CFG_FLASH0_SIZE 16
+
+/* What should the base address of the secondary FLASH be and how big
+ * is it (in Mbytes)? The secondary FLASH is whichever is connected
+ * to *CS6. U-Boot expects this to be the on board FLASH. If you don't
+ * want it enabled, don't define these constants.
+ */
+#define CFG_FLASH1_BASE 0
+#define CFG_FLASH1_SIZE 0
+#undef CFG_FLASH1_BASE
+#undef CFG_FLASH1_SIZE
+
+/* What should be the base address of SDRAM DIMM (60x bus) and how big is
+ * it (in Mbytes)?
+*/
+#define CFG_SDRAM0_BASE 0x00000000
+#define CFG_SDRAM0_SIZE 64
+
+/* define CFG_LSDRAM if you want to enable the 32M SDRAM on the
+ * local bus (8260 local bus is NOT cacheable!)
+*/
+/* #define CFG_LSDRAM */
+#undef CFG_LSDRAM
+
+#ifdef CFG_LSDRAM
+/* What should be the base address of SDRAM DIMM (local bus) and how big is
+ * it (in Mbytes)?
+*/
+ #define CFG_SDRAM1_BASE 0x04000000
+ #define CFG_SDRAM1_SIZE 32
+#else
+ #define CFG_SDRAM1_BASE 0
+ #define CFG_SDRAM1_SIZE 0
+ #undef CFG_SDRAM1_BASE
+ #undef CFG_SDRAM1_SIZE
+#endif /* CFG_LSDRAM */
+
+/* What should be the base address of NVRAM and how big is
+ * it (in Bytes)
+ */
+#define CFG_NVRAM_BASE_ADDR 0xFa080000
+#define CFG_NVRAM_SIZE (128*1024)-16
+
+/* The RTC is a Dallas DS1556
+ */
+#define CONFIG_RTC_DS1556
+
+/* What should be the base address of the LEDs and switch S0?
+ * If you don't want them enabled, don't define this.
+ */
+#define CFG_LED_BASE 0x00000000
+#undef CFG_LED_BASE
+
+/*
+ * select serial console configuration
+ *
+ * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
+ * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
+ * for SCC).
+ *
+ * if CONFIG_CONS_NONE is defined, then the serial console routines must
+ * defined elsewhere.
+ */
+#define CONFIG_CONS_ON_SMC /* define if console on SMC */
+#undef CONFIG_CONS_ON_SCC /* define if console on SCC */
+#undef CONFIG_CONS_NONE /* define if console on neither */
+#define CONFIG_CONS_INDEX 1 /* which SMC/SCC channel for console */
+
+/*
+ * select ethernet configuration
+ *
+ * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
+ * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
+ * for FCC)
+ *
+ * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
+ * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
+ * from CONFIG_COMMANDS to remove support for networking.
+ */
+#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
+#define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */
+#undef CONFIG_ETHER_NONE /* define if ethernet on neither */
+#define CONFIG_ETHER_INDEX 3 /* which SCC/FCC channel for ethernet */
+
+#if ( CONFIG_ETHER_INDEX == 3 )
+
+/*
+ * - Rx-CLK is CLK15
+ * - Tx-CLK is CLK16
+ * - RAM for BD/Buffers is on the local Bus (see 28-13)
+ * - Enable Half Duplex in FSMR
+ */
+# define CFG_CMXFCR_MASK (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CFG_CMXFCR_VALUE (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+
+/*
+ * - RAM for BD/Buffers is on the local Bus (see 28-13)
+ */
+#ifdef CFG_LSDRAM
+ #define CFG_CPMFCR_RAMTYPE 3
+#else /* CFG_LSDRAM */
+ #define CFG_CPMFCR_RAMTYPE 0
+#endif /* CFG_LSDRAM */
+
+/* - Enable Half Duplex in FSMR */
+/* # define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) */
+# define CFG_FCC_PSMR 0
+
+#else /* CONFIG_ETHER_INDEX */
+# error "on EP8260 ethernet must be FCC3"
+#endif /* CONFIG_ETHER_INDEX */
+
+/*
+ * select i2c support configuration
+ *
+ * Supported configurations are {none, software, hardware} drivers.
+ * If the software driver is chosen, there are some additional
+ * configuration items that the driver uses to drive the port pins.
+ */
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#ifdef CONFIG_SOFT_I2C
+#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
+#define I2C_ACTIVE (iop->pdir |= 0x00010000)
+#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
+#define I2C_READ ((iop->pdat & 0x00010000) != 0)
+#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
+ else iop->pdat &= ~0x00010000
+#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
+ else iop->pdat &= ~0x00020000
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
+
+/* #define CONFIG_RTC_DS174x */
+
+/* Define this to reserve an entire FLASH sector (256 KB) for
+ * environment variables. Otherwise, the environment will be
+ * put in the same sector as U-Boot, and changing variables
+ * will erase U-Boot temporarily
+ */
+#define CFG_ENV_IN_OWN_SECT
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* What should the console's baud rate be? */
+/* #define CONFIG_BAUDRATE 57600 */
+#define CONFIG_BAUDRATE 115200
+
+/* Ethernet MAC address */
+#define CONFIG_ETHADDR 00:10:EC:00:30:8C
+
+#define CONFIG_IPADDR 192.168.254.130
+#define CONFIG_SERVERIP 192.168.254.49
+
+/* Set to a positive value to delay for running BOOTCOMMAND */
+#define CONFIG_BOOTDELAY -1
+
+/* undef this to save memory */
+#define CFG_LONGHELP
+
+/* Monitor Command Prompt */
+#define CFG_PROMPT "=> "
+
+/* Define this variable to enable the "hush" shell (from
+ Busybox) as command line interpreter, thus enabling
+ powerful command line syntax like
+ if...then...else...fi conditionals or `&&' and '||'
+ constructs ("shell scripts").
+ If undefined, you get the old, much simpler behaviour
+ with a somewhat smapper memory footprint.
+*/
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+
+/* What U-Boot subsytems do you want enabled? */
+/*
+*/
+#define CONFIG_COMMANDS ( CFG_CMD_ALL & \
+ ~CFG_CMD_BSP & \
+ ~CFG_CMD_DCR & \
+ ~CFG_CMD_DHCP & \
+ ~CFG_CMD_DOC & \
+ ~CFG_CMD_EEPROM & \
+ ~CFG_CMD_FDC & \
+ ~CFG_CMD_HWFLOW & \
+ ~CFG_CMD_IDE & \
+ ~CFG_CMD_JFFS2 & \
+ ~CFG_CMD_KGDB & \
+ ~CFG_CMD_MII & \
+ ~CFG_CMD_PCI & \
+ ~CFG_CMD_PCMCIA & \
+ ~CFG_CMD_SCSI & \
+ ~CFG_CMD_USB & \
+ ~CFG_CMD_VFD & \
+ ~CFG_CMD_DTT )
+
+/* Where do the internal registers live? */
+#define CFG_IMMR 0xF0000000
+#define CFG_DEFAULT_IMMR 0x00010000
+
+/* Where do the on board registers (CS4) live? */
+#define CFG_REGS_BASE 0xFA000000
+
+/*****************************************************************************
+ *
+ * You should not have to modify any of the following settings
+ *
+ *****************************************************************************/
+
+#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
+#define CONFIG_EP8260 11 /* on an Embedded Planet EP8260 Board, Rev. 11 */
+
+#define CONFIG_BOARD_PRE_INIT 1 /* Call board_pre_init */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+/* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
+
+#define CFG_MAXARGS 8 /* max number of command args */
+
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#ifdef CFG_LSDRAM
+ #define CFG_MEMTEST_START 0x04000000 /* memtest works on */
+ #define CFG_MEMTEST_END 0x06000000 /* 64-96 MB in SDRAM */
+#else
+ #define CFG_MEMTEST_START 0x00000000 /* memtest works on */
+ #define CFG_MEMTEST_END 0x02000000 /* 0-32 MB in SDRAM */
+#endif /* CFG_LSDRAM */
+
+#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
+
+#define CFG_LOAD_ADDR 0x00100000 /* default load address */
+#define CFG_TFTP_LOADADDR 0x00100000 /* default load address for network file downloads */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+#define CFG_FLASH_BASE CFG_FLASH0_BASE
+#define CFG_SDRAM_BASE CFG_SDRAM0_BASE
+
+/*-----------------------------------------------------------------------
+ * Hard Reset Configuration Words
+ */
+
+#if defined(CFG_SBC_BOOT_LOW)
+# define CFG_SBC_HRCW_BOOT_FLAGS (HRCW_CIP | HRCW_BMS)
+#else
+# define CFG_SBC_HRCW_BOOT_FLAGS (0x00000000)
+#endif /* defined(CFG_SBC_BOOT_LOW) */
+
+/* get the HRCW ISB field from CFG_IMMR */
+/*
+#define CFG_SBC_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) |\
+ ((CFG_IMMR & 0x01000000) >> 7) |\
+ ((CFG_IMMR & 0x00100000) >> 4) )
+
+#define CFG_HRCW_MASTER (HRCW_EBM |\
+ HRCW_L2CPC01 |\
+ CFG_SBC_HRCW_IMMR |\
+ HRCW_APPC10 |\
+ HRCW_CS10PC01 |\
+ HRCW_MODCK_H0101 |\
+ CFG_SBC_HRCW_BOOT_FLAGS)
+*/
+#define CFG_HRCW_MASTER 0x10400245
+
+/* no slaves */
+#define CFG_HRCW_SLAVE1 0
+#define CFG_HRCW_SLAVE2 0
+#define CFG_HRCW_SLAVE3 0
+#define CFG_HRCW_SLAVE4 0
+#define CFG_HRCW_SLAVE5 0
+#define CFG_HRCW_SLAVE6 0
+#define CFG_HRCW_SLAVE7 0
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 128 /* bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
+ */
+#define CFG_MONITOR_BASE TEXT_BASE
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT
+#endif
+
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */
+
+#ifndef CFG_RAMBOOT
+# define CFG_ENV_IS_IN_FLASH 1
+
+# ifdef CFG_ENV_IN_OWN_SECT
+# define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+# define CFG_ENV_SECT_SIZE 0x40000
+# else
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
+# define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
+# define CFG_ENV_SECT_SIZE 0x10000 /* see README - env sect real size */
+# endif /* CFG_ENV_IN_OWN_SECT */
+#else
+# define CFG_ENV_IS_IN_NVRAM 1
+# define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+# define CFG_ENV_SIZE 0x200
+#endif /* CFG_RAMBOOT */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * HIDx - Hardware Implementation-dependent Registers 2-11
+ *-----------------------------------------------------------------------
+ * HID0 also contains cache control - initially enable both caches and
+ * invalidate contents, then the final state leaves only the instruction
+ * cache enabled. Note that Power-On and Hard reset invalidate the caches,
+ * but Soft reset does not.
+ *
+ * HID1 has only read-only information - nothing to set.
+ */
+#define CFG_HID0_INIT (HID0_ICE |\
+ HID0_DCE |\
+ HID0_ICFI |\
+ HID0_DCI |\
+ HID0_IFEM |\
+ HID0_ABE)
+#ifdef CFG_LSDRAM
+/* 8260 local bus is NOT cacheable */
+#define CFG_HID0_FINAL (/*HID0_ICE |*/\
+ HID0_IFEM |\
+ HID0_ABE |\
+ HID0_EMCP)
+#else /* !CFG_LSDRAM */
+#define CFG_HID0_FINAL (HID0_ICE |\
+ HID0_IFEM |\
+ HID0_ABE |\
+ HID0_EMCP)
+#endif /* CFG_LSDRAM */
+
+#define CFG_HID2 0
+
+/*-----------------------------------------------------------------------
+ * RMR - Reset Mode Register
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RMR 0
+
+/*-----------------------------------------------------------------------
+ * BCR - Bus Configuration 4-25
+ *-----------------------------------------------------------------------
+ */
+/*#define CFG_BCR (BCR_EBM |\
+ BCR_PLDP |\
+ BCR_EAV |\
+ BCR_NPQM1)
+*/
+#define CFG_BCR 0x80C08000
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 4-31
+ *-----------------------------------------------------------------------
+ */
+
+#define CFG_SIUMCR (SIUMCR_L2CPC01 |\
+ SIUMCR_APPC10 |\
+ SIUMCR_CS10PC01)
+
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
+ */
+#ifdef CFG_LSDRAM
+#define CFG_SYPCR (SYPCR_SWTC |\
+ SYPCR_BMT |\
+ SYPCR_PBME |\
+ SYPCR_LBME |\
+ SYPCR_SWP)
+#else
+#define CFG_SYPCR (SYPCR_SWTC |\
+ SYPCR_BMT |\
+ SYPCR_PBME |\
+ SYPCR_SWP)
+#endif
+/*-----------------------------------------------------------------------
+ * TMCNTSC - Time Counter Status and Control 4-40
+ *-----------------------------------------------------------------------
+ * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
+ * and enable Time Counter
+ */
+#define CFG_TMCNTSC (TMCNTSC_SEC |\
+ TMCNTSC_ALR |\
+ TMCNTSC_TCF |\
+ TMCNTSC_TCE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 4-42
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
+ * Periodic timer
+ */
+/*#define CFG_PISCR (PISCR_PS |\
+ PISCR_PTF |\
+ PISCR_PTE)*/
+#define CFG_PISCR 0
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control 9-8
+ *-----------------------------------------------------------------------
+ */
+#define CFG_SCCR (SCCR_DFBRG01)
+
+/*-----------------------------------------------------------------------
+ * RCCR - RISC Controller Configuration 13-7
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RCCR 0
+
+/*-----------------------------------------------------------------------
+ * MPTPR - Memory Refresh Timer Prescale Register 10-32
+ *-----------------------------------------------------------------------
+ */
+#define CFG_MPTPR (0x0A00 & MPTPR_PTP_MSK)
+
+/*
+ * Init Memory Controller:
+ *
+ * Bank Bus Machine PortSz Device
+ * ---- --- ------- ------ ------
+ * 0 60x GPCM 64 bit FLASH (BGA - 16MB AMD AM29DL323DB90WDI)
+ * 1 60x SDRAM 64 bit SDRAM (BGA - 64MB Micron 48LC8M16A2TG)
+ * 2 Local SDRAM 32 bit SDRAM (BGA - 32MB Micron 48LC8M16A2TG)
+ * 3 unused
+ * 4 60x GPCM 8 bit Board Regs, NVRTC
+ * 5 unused
+ * 6 unused
+ * 7 unused
+ * 8 PCMCIA
+ * 9 unused
+ * 10 unused
+ * 11 unused
+*/
+
+/*-----------------------------------------------------------------------
+ * BRx - Base Register
+ * Ref: Section 10.3.1 on page 10-14
+ * ORx - Option Register
+ * Ref: Section 10.3.2 on page 10-18
+ *-----------------------------------------------------------------------
+ */
+
+/* Bank 0 - FLASH
+ *
+ */
+#define CFG_BR0_PRELIM ((CFG_FLASH0_BASE & BRx_BA_MSK) |\
+ BRx_PS_64 |\
+ BRx_DECC_NONE |\
+ BRx_MS_GPCM_P |\
+ BRx_V)
+
+#define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH0_SIZE) |\
+ ORxG_CSNT |\
+ ORxG_ACS_DIV1 |\
+ ORxG_SCY_6_CLK |\
+ ORxG_EHTR)
+
+/* Bank 1 - SDRAM
+ * PSDRAM
+ */
+#define CFG_BR1_PRELIM ((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
+ BRx_PS_64 |\
+ BRx_MS_SDRAM_P |\
+ BRx_V)
+
+#define CFG_OR1_PRELIM (MEG_TO_AM(CFG_SDRAM0_SIZE) |\
+ ORxS_BPD_4 |\
+ ORxS_ROWST_PBI1_A6 |\
+ ORxS_NUMR_12)
+
+#define CFG_PSDMR 0xC34E2462
+#define CFG_PSRT 0x64
+
+
+#ifdef CFG_LSDRAM
+/* Bank 2 - SDRAM
+ * LSDRAM
+ */
+
+ #define CFG_BR2_PRELIM ((CFG_SDRAM1_BASE & BRx_BA_MSK) |\
+ BRx_PS_32 |\
+ BRx_MS_SDRAM_L |\
+ BRx_V)
+
+ #define CFG_OR2_PRELIM (MEG_TO_AM(CFG_SDRAM1_SIZE) |\
+ ORxS_BPD_4 |\
+ ORxS_ROWST_PBI0_A9 |\
+ ORxS_NUMR_12)
+
+ #define CFG_LSDMR 0x416A2562
+ #define CFG_LSRT 0x64
+#else
+ #define CFG_LSRT 0x0
+#endif /* CFG_LSDRAM */
+
+/* Bank 4 - On board registers
+ * NVRTC and BCSR
+ */
+#define CFG_BR4_PRELIM ((CFG_REGS_BASE & BRx_BA_MSK) |\
+ BRx_PS_8 |\
+ BRx_MS_GPCM_P |\
+ BRx_V)
+/*
+#define CFG_OR4_PRELIM (ORxG_AM_MSK |\
+ ORxG_CSNT |\
+ ORxG_ACS_DIV1 |\
+ ORxG_SCY_10_CLK |\
+ ORxG_TRLX)
+*/
+#define CFG_OR4_PRELIM 0xfff00854
+
+/* Bank 8 - On board registers
+ * PCMCIA (currently not working!)
+ */
+#define CFG_BR8_PRELIM ((CFG_REGS_BASE & BRx_BA_MSK) |\
+ BRx_PS_16 |\
+ BRx_MS_GPCM_P |\
+ BRx_V)
+
+#define CFG_OR8_PRELIM (ORxG_AM_MSK |\
+ ORxG_CSNT |\
+ ORxG_ACS_DIV1 |\
+ ORxG_SETA |\
+ ORxG_SCY_10_CLK)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#endif /* __CONFIG_H */