* Patch by Prakash Kumar, 27 Jun 2004:

  Add support for the PXA250 based Intrinsyc Cerf board.

* Patch by Yasushi Shoji, 27 Jun 2004:
  fix comment in include/common.h

1 files changed, 220 insertions, 0 deletions

diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
new file mode 100644
index 00000000000..6a136d541a5
--- /dev/null
+++ b/include/configs/cerf250.h
@@ -0,0 +1,220 @@
+/*
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Configuation settings for the CERF250 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#define CONFIG_INIT_CRITICAL
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_PXA250		1	/* This is an PXA250 CPU    */
+#define CONFIG_CERF250		1	/* on Cerf PXA Board	    */
+#define BOARD_LATE_INIT		1
+#define CONFIG_BAUDRATE		38400
+
+#undef 	CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_SMC91111
+#define CONFIG_SMC91111_BASE 0x04000300
+#define CONFIG_SMC_USE_32_BIT
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_FFUART	     1	/* we use FFUART on CERF PXA */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_ETHADDR		00:D0:CA:F1:3C:D2
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.0.5
+#define CONFIG_SERVERIP		192.168.0.2
+#define CONFIG_BOOTCOMMAND	"bootm 0xC0000"
+#define CONFIG_BOOTARGS		"root=/dev/mtdblock3 rootfstype=jffs2 console=ttyS0,38400"
+#define CONFIG_CMDLINE_TAG
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_HUSH_PARSER		1
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+#define CFG_LONGHELP					/* undef to save memory		*/
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT			"uboot$ "	/* Monitor Command Prompt */
+#else
+#define CFG_PROMPT			"=> "		/* Monitor Command Prompt */
+#endif
+#define CFG_CBSIZE			256			/* Console I/O Buffer Size	*/
+#define CFG_PBSIZE 			(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+										/* Print Buffer Size */
+#define CFG_MAXARGS			16			/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_DEVICE_NULLDEV	1
+
+#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
+
+#undef	CFG_CLKS_IN_HZ
+
+#define CFG_LOAD_ADDR		0xa2000000	/* default load address */
+
+#define CFG_HZ				3686400		/* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED		0x141		/* set core clock to 400/200/100 MHz */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE		(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	4	   		/* we have 2 banks of DRAM */
+#define PHYS_SDRAM_1			0xa0000000 	/* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE		0x04000000 	/* 64 MB */
+#define PHYS_SDRAM_2			0xa4000000 	/* SDRAM Bank #2 */
+#define PHYS_SDRAM_2_SIZE		0x00000000 	/* 0 MB */
+#define PHYS_SDRAM_3			0xa8000000 	/* SDRAM Bank #3 */
+#define PHYS_SDRAM_3_SIZE		0x00000000 	/* 0 MB */
+#define PHYS_SDRAM_4			0xac000000 	/* SDRAM Bank #4 */
+#define PHYS_SDRAM_4_SIZE		0x00000000 	/* 0 MB */
+
+#define PHYS_FLASH_1			0x00000000 	/* Flash Bank #1 */
+#define PHYS_FLASH_2			0x04000000 	/* Flash Bank #2 */
+#define PHYS_FLASH_SIZE			0x02000000 	/* 32 MB */
+#define PHYS_FLASH_BANK_SIZE		0x02000000 	/* 32 MB Banks */
+#define PHYS_FLASH_SECT_SIZE		0x00040000 	/* 256 KB sectors (x2) */
+
+#define CFG_DRAM_BASE			0xa0000000
+#define CFG_DRAM_SIZE			0x04000000
+
+#define CFG_FLASH_BASE			PHYS_FLASH_1
+
+/*
+ * GPIO settings
+ */
+
+
+#define CFG_GPSR0_VAL		0x00408030
+#define CFG_GPSR1_VAL		0x00BFA882
+#define CFG_GPSR2_VAL		0x0001C000
+#define CFG_GPCR0_VAL		0xC0031100
+#define CFG_GPCR1_VAL		0xFC400300
+#define CFG_GPCR2_VAL		0x00003FFF
+#define CFG_GPDR0_VAL		0xC0439330
+#define CFG_GPDR1_VAL		0xFCFFAB82
+#define CFG_GPDR2_VAL		0x0001FFFF
+#define CFG_GAFR0_L_VAL		0x80000000
+#define CFG_GAFR0_U_VAL		0xA5000010
+#define CFG_GAFR1_L_VAL		0x60008018
+#define CFG_GAFR1_U_VAL		0xAAA5AAAA
+#define CFG_GAFR2_L_VAL		0xAAA0000A
+#define CFG_GAFR2_U_VAL		0x00000002
+
+#define CFG_PSSR_VAL		0x20
+
+/*
+ * Memory settings
+ */
+#define CFG_MSC0_VAL		0x12447FF0
+#define CFG_MSC1_VAL		0x12BC5554
+#define CFG_MSC2_VAL		0x7FF97FF1
+#define CFG_MDCNFG_VAL		0x00001AC9
+#define CFG_MDREFR_VAL		0x03CDC017
+#define CFG_MDMRS_VAL		0x00000000
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CFG_MECR_VAL		0x00000000
+#define CFG_MCMEM0_VAL		0x00010504
+#define CFG_MCMEM1_VAL		0x00010504
+#define CFG_MCATT0_VAL		0x00010504
+#define CFG_MCATT1_VAL		0x00010504
+#define CFG_MCIO0_VAL		0x00004715
+#define CFG_MCIO1_VAL		0x00004715
+
+#define _LED			0x08000010	/*check this */
+#define LED_BLANK		0x08000040
+#define LED_GPIO		0x10
+
+/*
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	128  	/* max number of sectors on one chip    */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_MONITOR_LEN		0x40000		/* 256 KiB */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_MONITOR_LEN)
+#define CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
+
+
+#endif	/* __CONFIG_H */