diff options
author | Tom Rini <trini@konsulko.com> | 2017-03-14 11:08:10 -0400 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2017-04-05 13:52:01 -0400 |
commit | ea3310e8aafad1da72d9a5e60568d725cbdefdbd (patch) | |
tree | 869faa824f09ce4d40f2ce503a607ceb28b5ce91 /include/configs/bf533-ezkit.h | |
parent | c3b7cfe15ec1db047182d4ec55a3ce05f19bdf38 (diff) |
Blackfin: Remove
The architecture is currently unmaintained, remove.
Cc: Benjamin Matthews <mben12@gmail.com>
Cc: Chong Huang <chuang@ucrobotics.com>
Cc: Dimitar Penev <dpn@switchfin.org>
Cc: Haitao Zhang <hzhang@ucrobotics.com>
Cc: I-SYST Micromodule <support@i-syst.com>
Cc: M.Hasewinkel (MHA) <info@ssv-embedded.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Martin Strubel <strubel@section5.ch>
Cc: Peter Meerwald <devel@bct-electronic.com>
Cc: Sonic Zhang <sonic.adi@gmail.com>
Cc: Valentin Yakovenkov <yakovenkov@niistt.ru>
Cc: Wojtek Skulski <info@skutek.com>
Cc: Wojtek Skulski <skulski@pas.rochester.edu>
Signed-off-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'include/configs/bf533-ezkit.h')
-rw-r--r-- | include/configs/bf533-ezkit.h | 111 |
1 files changed, 0 insertions, 111 deletions
diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h deleted file mode 100644 index e154812abd..0000000000 --- a/include/configs/bf533-ezkit.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * U-Boot - Configuration file for BF533 EZKIT board - */ - -#ifndef __CONFIG_BF533_EZKIT_H__ -#define __CONFIG_BF533_EZKIT_H__ - -#include <asm/config-pre.h> - -/* - * Processor Settings - */ -#define CONFIG_BFIN_CPU bf533-0.3 -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_BYPASS - -/* - * Clock Settings - * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV - * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV - */ -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 27000000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ -#define CONFIG_CLKIN_HALF 0 -/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ -/* Values can range from 0-63 (where 0 means 64) */ -#define CONFIG_VCO_MULT 22 -/* CCLK_DIV controls the core clock divider */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* SCLK_DIV controls the system clock divider */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 5 - -/* - * Memory Settings - */ -#define CONFIG_MEM_SIZE 32 -/* Early EZKITs had 32megs, but later have 64megs */ -#if (CONFIG_MEM_SIZE == 64) -# define CONFIG_MEM_ADD_WDTH 10 -#else -# define CONFIG_MEM_ADD_WDTH 9 -#endif - -#define CONFIG_EBIU_SDRRC_VAL 0x398 -#define CONFIG_EBIU_SDGCTL_VAL 0x91118d - -#define CONFIG_EBIU_AMGCTL_VAL 0xFF -#define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0 -#define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0 - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) - -/* - * Network Settings - */ -#define ADI_CMDS_NETWORK 1 -#define CONFIG_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x20310300 -#define SMC91111_EEPROM_INIT() \ - do { \ - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF1 | PF0); \ - bfin_write_FIO_FLAG_C(PF1); \ - bfin_write_FIO_FLAG_S(PF0); \ - SSYNC(); \ - } while (0) -#define CONFIG_HOSTNAME bf533-ezkit - -/* - * Flash Settings - */ -#define CONFIG_SYS_FLASH_BASE 0x20000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 3 -#define CONFIG_SYS_MAX_FLASH_SECT 40 -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR 0x20030000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define FLASH_TOT_SECT 40 - -/* - * I2C Settings - */ -#define CONFIG_SYS_I2C_SOFT -#ifdef CONFIG_SYS_I2C_SOFT -#define CONFIG_SYS_I2C -#define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0 -#define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1 -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ -#endif - -/* - * Misc Settings - */ -#define CONFIG_MISC_INIT_R -#define CONFIG_RTC_BFIN -#define CONFIG_UART_CONSOLE 0 - -/* - * Pull in common ADI header for remaining command/environment setup - */ -#include <configs/bfin_adi_common.h> - -#endif |