diff options
author | rick <rick@andestech.com> | 2017-05-18 14:37:53 +0800 |
---|---|---|
committer | Andes <uboot@andestech.com> | 2017-05-22 14:05:46 +0800 |
commit | b841b6e94662b3b21a56d6ecaab64dcdfb0d311c (patch) | |
tree | 92847f53ffaeb104754e2940b32b981314627750 /include/configs/adp-ae3xx.h | |
parent | f5076f869855045e527de7f1367c65f55a2b1448 (diff) |
nds32: Support AE3XX platform.
Support Andestech AE3xx platform: serial, timer device tree flow.
Signed-off-by: rick <rick@andestech.com>
Diffstat (limited to 'include/configs/adp-ae3xx.h')
-rw-r--r-- | include/configs/adp-ae3xx.h | 260 |
1 files changed, 260 insertions, 0 deletions
diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h new file mode 100644 index 00000000000..edc742d379f --- /dev/null +++ b/include/configs/adp-ae3xx.h @@ -0,0 +1,260 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch-ae3xx/ae3xx.h> + +/* + * CPU and Board Configuration Options + */ +#define CONFIG_USE_INTERRUPT + +#define CONFIG_SKIP_LOWLEVEL_INIT + +#define CONFIG_SKIP_TRUNOFF_WATCHDOG + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_PANIC_HANG + +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF + +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_SERVERIP + +#ifdef CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0x00500000 +#ifdef CONFIG_OF_CONTROL +#undef CONFIG_OF_SEPARATE +#define CONFIG_OF_EMBED +#endif +#else + +#define CONFIG_SYS_TEXT_BASE 0x80000000 +#endif + +/* + * Timer + */ +#define CONFIG_SYS_CLK_FREQ 39062500 +#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ + +/* + * Use Externel CLOCK or PCLK + */ +#undef CONFIG_FTRTC010_EXTCLK + +#ifndef CONFIG_FTRTC010_EXTCLK +#define CONFIG_FTRTC010_PCLK +#endif + +#ifdef CONFIG_FTRTC010_EXTCLK +#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ +#else +#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ +#endif + +#define TIMER_LOAD_VAL 0xffffffff + +/* + * Real Time Clock + */ +#define CONFIG_RTC_FTRTC010 + +/* + * Real Time Clock Divider + * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) + */ +#define OSC_5MHZ (5*1000000) +#define OSC_CLK (4*OSC_5MHZ) +#define RTC_DIV_COUNT (0.5) /* Why?? */ + +/* + * Serial console configuration + */ + +/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE +#ifndef CONFIG_DM_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#endif +#define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ + +/* + * Ethernet + */ +#define CONFIG_FTMAC100 + +/* + * SD (MMC) controller + */ +#define CONFIG_FTSDC010 +#define CONFIG_FTSDC010_NUMBER 1 +#define CONFIG_FTSDC010_SDIO + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * Size of malloc() pool + */ +/* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ +#define CONFIG_SYS_MALLOC_LEN (512 << 10) + +/* + * Physical Memory Map + */ +#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ + +#define PHYS_SDRAM_1 \ + (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ + +#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */ + +#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */ +#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ + GENERATED_GBL_DATA_SIZE) + +/* + * Load address and memory test area should agree with + * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself. + */ +#define CONFIG_SYS_LOAD_ADDR 0x300000 + +/* memtest works on 63 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) + +/* + * Static memory controller configuration + */ +#define CONFIG_FTSMC020 + +#ifdef CONFIG_FTSMC020 +#include <faraday/ftsmc020.h> + +#define CONFIG_SYS_FTSMC020_CONFIGS { \ + { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ + { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ +} + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */ +#define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \ + FTSMC020_BANK_SIZE_32M | \ + FTSMC020_BANK_MBW_32) + +#define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \ + FTSMC020_TPR_AST(1) | \ + FTSMC020_TPR_CTW(1) | \ + FTSMC020_TPR_ATI(1) | \ + FTSMC020_TPR_AT2(1) | \ + FTSMC020_TPR_WTC(1) | \ + FTSMC020_TPR_AHT(1) | \ + FTSMC020_TPR_TRNA(1)) +#endif + +/* + * FLASH on ADP_AG101P is connected to BANK0 + * Just disalbe the other BANK to avoid detection error. + */ +#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ + FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ + FTSMC020_BANK_SIZE_32M | \ + FTSMC020_BANK_MBW_32) + +#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \ + FTSMC020_TPR_CTW(3) | \ + FTSMC020_TPR_ATI(0xf) | \ + FTSMC020_TPR_AT2(3) | \ + FTSMC020_TPR_WTC(3) | \ + FTSMC020_TPR_AHT(3) | \ + FTSMC020_TPR_TRNA(0xf)) + +#define FTSMC020_BANK1_CONFIG (0x00) +#define FTSMC020_BANK1_TIMING (0x00) +#endif /* CONFIG_FTSMC020 */ + +/* + * FLASH and environment organization + */ +/* use CFI framework */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER + +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_CFI_FLASH_STATUS_POLL + +/* support JEDEC */ +#ifdef CONFIG_CFI_FLASH +#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 +#endif + +/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ +#define PHYS_FLASH_1 0x88000000 /* BANK 0 */ +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ + +/* max number of memory banks */ +/* + * There are 4 banks supported for this Controller, + * but we have only 1 bank connected to flash on board + */ +#ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#endif +#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000} + +/* max number of sectors on one chip */ +#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2) +#define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE +#define CONFIG_SYS_MAX_FLASH_SECT 512 + +/* environments */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x140000) +#define CONFIG_ENV_SIZE 8192 +#define CONFIG_ENV_OVERWRITE + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ + +/* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) +/* Increase max gunzip size */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) + +#endif /* __CONFIG_H */ |