diff options
| author | wdenk <wdenk> | 2004-07-11 20:04:51 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2004-07-11 20:04:51 +0000 |
| commit | 810509266fba83fb73f28842fc99268e761bd43c (patch) | |
| tree | 37ea11c82b46a77116b115a72d0009c116b6581d /include/configs/Total5200.h | |
| parent | 6c7a14084ae5f7dde3819e4ab43fd78ea82805fe (diff) | |
* Cleanup
* Patch by Mark Jonas, 05 Jul 2004:
add support for the Total5100's and Total5200's LCD screen
* Patches by Dan Eisenhut, 01 Jul 2004:
- README fixes.
- Move doc2000.h include to prevent compiler warning on some boards
Diffstat (limited to 'include/configs/Total5200.h')
| -rw-r--r-- | include/configs/Total5200.h | 33 |
1 files changed, 28 insertions, 5 deletions
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h index 29c627c6286..830bf81a451 100644 --- a/include/configs/Total5200.h +++ b/include/configs/Total5200.h @@ -60,6 +60,25 @@ #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +/* + * Video console + */ +#if 1 +#define CONFIG_VIDEO_SED13806 +#define CONFIG_VIDEO_SED13806_16BPP + +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +/* #define CONFIG_VIDEO_BMP_LOGO */ +#define CONFIG_CONSOLE_EXTRA_INFO +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_SPLASH_SCREEN + +#define ADD_VIDEO_CMD CFG_CMD_BMP +#else +#define ADD_VIDEO_CMD 0 +#endif #ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */ /* @@ -114,6 +133,7 @@ CFG_CMD_EEPROM | \ CFG_CMD_FAT | \ CFG_CMD_IDE | \ + ADD_VIDEO_CMD | \ ADD_PCI_CMD | \ ADD_USB_CMD) @@ -129,7 +149,9 @@ */ #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_PREBOOT "echo;" \ +#define CONFIG_PREBOOT \ + "setenv stdout serial;setenv stderr serial;" \ + "echo;" \ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ "echo" @@ -150,6 +172,7 @@ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_82xx\0" \ "bootfile=/tftpboot/MPC5200/uImage\0" \ + "console=serial\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -201,7 +224,7 @@ # define CFG_FLASH_SIZE 0x06000000 #endif /* CONFIG_TOTAL5200_REV */ -#if !defined(CFG_LOWBOOT) +#if defined(CFG_LOWBOOT) # define CFG_ENV_ADDR 0xFE040000 #else /* CFG_LOWBOOT */ # define CFG_ENV_ADDR 0xFFF40000 @@ -223,7 +246,7 @@ #define CFG_MBAR 0xF0000000 /* 64 kB */ #define CFG_FPGA_BASE 0xF0010000 /* 64 kB */ #define CFG_CPLD_BASE 0xF0020000 /* 64 kB */ -#define CFG_LCD_BASE 0xF0100000 /* 2048 kB */ +#define CFG_LCD_BASE 0xF1000000 /* 4096 kB */ /* Use SRAM until RAM will be available */ #define CFG_INIT_RAM_ADDR MPC5XXX_SRAM @@ -332,8 +355,8 @@ #define CFG_CS1_CFG 0x0019FF00 /* 25WS, MX, AL, AA, CE, AS_25, DS_32 */ #define CFG_CS2_START CFG_LCD_BASE -#define CFG_CS2_SIZE 0x00200000 /* 2048 kB */ -#define CFG_CS2_CFG 0x0019FD00 /* 25WS, MX, AL, AA, CE, AS_25, DS_16 */ +#define CFG_CS2_SIZE 0x00400000 /* 4096 kB */ +#define CFG_CS2_CFG 0x0032FD00 /* 50WS, MX, AL, AA, CE, AS_25, DS_16 */ #if CONFIG_TOTAL5200_REV==1 # define CFG_CS3_START CFG_CPLD_BASE |