summaryrefslogtreecommitdiff
path: root/include/configs/MPC8260ADS.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-04-15 18:22:41 +0000
committerwdenk <wdenk>2004-04-15 18:22:41 +0000
commit04a85b3b36fdbaaac5fa95d61f59f481bbcf7520 (patch)
treea4c6731a78805c51f43a8b195034d2036b28941b /include/configs/MPC8260ADS.h
parentd716b126718d874f52ffb694e6c22b7235cec483 (diff)
* Patches by Pantelis Antoniou, 30 Mar 2004:
- add auto-complete support to the U-Boot CLI - add support for NETTA and NETPHONE boards; fix NETVIA board * Patch by Yuli Barcohen, 28 Mar 2004: - Add support for MPC8272 family including MPC8247/8248/8271/8272 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS) - Change configuration method for MPC8260ADS family
Diffstat (limited to 'include/configs/MPC8260ADS.h')
-rw-r--r--include/configs/MPC8260ADS.h99
1 files changed, 64 insertions, 35 deletions
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index efc7a613fc..7bd0d8e88d 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -7,10 +7,11 @@
* Note: my board is a PILOT rev.
* Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
*
- * (C) Copyright 2003 Arabella Software Ltd.
+ * (C) Copyright 2003-2004 Arabella Software Ltd.
* Yuli Barcohen <yuli@arabellasw.com>
* Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
* Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
+ * Ported to MPC8272ADS board.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -39,18 +40,24 @@
* (easy to change)
*/
-#define CONFIG_MPC8260 1 /* This is an MPC8260 CPU */
-#define CONFIG_MPC8260ADS 1 /* ...on motorola ads board */
+#define CONFIG_MPC8260ADS 1 /* Motorola PQ2 ADS family board */
/* ADS flavours */
#define CFG_8260ADS 1 /* MPC8260ADS */
#define CFG_8266ADS 2 /* MPC8266ADS */
#define CFG_PQ2FADS 3 /* PQ2FADS-ZU or PQ2FADS-VR */
+#define CFG_8272ADS 4 /* MPC8272ADS */
#ifndef CONFIG_ADSTYPE
#define CONFIG_ADSTYPE CFG_8260ADS
#endif /* CONFIG_ADSTYPE */
+#if CONFIG_ADSTYPE == CFG_8272ADS
+#define CONFIG_MPC8272 1
+#else
+#define CONFIG_MPC8260 1
+#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
/* allow serial and ethaddr to be overwritten */
@@ -92,42 +99,60 @@
#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */
-#if (CONFIG_ETHER_INDEX == 2)
-/*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - Select bus for bd/buffers (see 28-13)
- * - Full duplex
- */
-# define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+#if CONFIG_ETHER_INDEX == 1
+
+# define CFG_PHY_ADDR 0
+# define CFG_CMXFCR_VALUE (CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
+# define CFG_CMXFCR_MASK (CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
+
+#elif CONFIG_ETHER_INDEX == 2
+
+#if CONFIG_ADSTYPE == CFG_8272ADS /* RxCLK is CLK15, TxCLK is CLK16 */
+# define CFG_PHY_ADDR 3
+# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK16)
+#else /* RxCLK is CLK13, TxCLK is CLK14 */
+# define CFG_PHY_ADDR 0
# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-# define CFG_CPMFCR_RAMTYPE 0
-# define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
+#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+
+# define CFG_CMXFCR_MASK (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
#endif /* CONFIG_ETHER_INDEX */
+#define CFG_CPMFCR_RAMTYPE 0 /* BDs and buffers on 60x bus */
+#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB) /* Full duplex */
+
#define CONFIG_MII /* MII PHY management */
#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
/*
* GPIO pins used for bit-banged MII communications
*/
#define MDIO_PORT 2 /* Port C */
-#define MDIO_ACTIVE (iop->pdir |= 0x00400000)
-#define MDIO_TRISTATE (iop->pdir &= ~0x00400000)
-#define MDIO_READ ((iop->pdat & 0x00400000) != 0)
-#define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \
- else iop->pdat &= ~0x00400000
+#if CONFIG_ADSTYPE == CFG_8272ADS
+#define CFG_MDIO_PIN 0x00002000 /* PC18 */
+#define CFG_MDC_PIN 0x00001000 /* PC19 */
+#else
+#define CFG_MDIO_PIN 0x00400000 /* PC9 */
+#define CFG_MDC_PIN 0x00200000 /* PC10 */
+#endif /* CONFIG_ADSTYPE == CFG_8272ADS */
+
+#define MDIO_ACTIVE (iop->pdir |= CFG_MDIO_PIN)
+#define MDIO_TRISTATE (iop->pdir &= ~CFG_MDIO_PIN)
+#define MDIO_READ ((iop->pdat & CFG_MDIO_PIN) != 0)
+
+#define MDIO(bit) if(bit) iop->pdat |= CFG_MDIO_PIN; \
+ else iop->pdat &= ~CFG_MDIO_PIN
-#define MDC(bit) if(bit) iop->pdat |= 0x00200000; \
- else iop->pdat &= ~0x00200000
+#define MDC(bit) if(bit) iop->pdat |= CFG_MDC_PIN; \
+ else iop->pdat &= ~CFG_MDC_PIN
#define MIIDELAY udelay(1)
#endif /* CONFIG_ETHER_ON_FCC */
-#if CONFIG_ADSTYPE == CFG_PQ2FADS
-#undef CONFIG_SPD_EEPROM /* On PQ2FADS-ZU, SDRAM is soldered */
+#if CONFIG_ADSTYPE >= CFG_PQ2FADS
+#undef CONFIG_SPD_EEPROM /* On new boards, SDRAM is soldered */
#else
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
@@ -136,21 +161,21 @@
#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
#define CONFIG_SPD_ADDR 0x50
#endif
-#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+#endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */
#ifndef CONFIG_SDRAM_PBI
#define CONFIG_SDRAM_PBI 0 /* By default, use bank-based interleaving */
#endif
#ifndef CONFIG_8260_CLKIN
-#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#if CONFIG_ADSTYPE >= CFG_PQ2FADS
#define CONFIG_8260_CLKIN 100000000 /* in Hz */
#else
#define CONFIG_8260_CLKIN 66000000 /* in Hz */
#endif
#endif
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_BAUDRATE 38400
#define CFG_EXCLUDE CFG_CMD_BEDBUG | \
CFG_CMD_BMP | \
@@ -176,7 +201,7 @@
CFG_CMD_USB | \
CFG_CMD_VFD
-#if CONFIG_ADSTYPE == CFG_PQ2FADS
+#if CONFIG_ADSTYPE >= CFG_PQ2FADS
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
CFG_CMD_SDRAM | \
CFG_CMD_I2C | \
@@ -184,14 +209,14 @@
#else
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~( \
CFG_EXCLUDE ) )
-#endif /* CONFIG_ADSTYPE == CFG_PQ2FADS */
+#endif /* CONFIG_ADSTYPE >= CFG_PQ2FADS */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */
-#define CONFIG_BOOTARGS "root=/dev/ram rw"
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#define CONFIG_BOOTCOMMAND "bootm fff80000" /* autoboot command */
+#define CONFIG_BOOTARGS "root=/dev/mtdblock2"
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
@@ -256,12 +281,12 @@
#define RS232EN_2 0x01000001
#define FETHIEN1 0x08000008
#define FETH1_RST 0x04000004
-#define FETHIEN2 0x01000000
+#define FETHIEN2 0x10000000
#define FETH2_RST 0x08000000
#define BCSR_PCI_MODE 0x01000000
#define CFG_INIT_RAM_ADDR CFG_IMMR
-#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
@@ -273,7 +298,6 @@
( HRCW_BMS | HRCW_APPC10 ) |\
( HRCW_MODCK_H0101 ) \
)
-
/* no slaves */
#define CFG_HRCW_SLAVE1 0
#define CFG_HRCW_SLAVE2 0
@@ -336,8 +360,8 @@
#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
#define CFG_RCCR 0
-#if CONFIG_ADSTYPE == CFG_8266ADS
-#undef CFG_LSDRAM_BASE /* No local bus SDRAM on MPC8266ADS */
+#if (CONFIG_ADSTYPE == CFG_8266ADS) || (CONFIG_ADSTYPE == CFG_8272ADS)
+#undef CFG_LSDRAM_BASE /* No local bus SDRAM on these boards */
#endif /* CONFIG_ADSTYPE == CFG_8266ADS */
#if CONFIG_ADSTYPE == CFG_PQ2FADS
@@ -347,6 +371,11 @@
#define CFG_LSDMR 0x828737A3
#define CFG_LSRT 0x13
#define CFG_MPTPR 0x2800
+#elif CONFIG_ADSTYPE == CFG_8272ADS
+#define CFG_OR2 0xFC002CC0
+#define CFG_PSDMR 0x834E24A3
+#define CFG_PSRT 0x13
+#define CFG_MPTPR 0x2800
#else
#define CFG_OR2 0xFF000CA0
#define CFG_PSDMR 0x016EB452