Coding style cleanup

1 files changed, 100 insertions, 100 deletions

diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h
index 2a86d8af84c..331131aba79 100644
--- a/include/configs/KAREF.h
+++ b/include/configs/KAREF.h
@@ -22,7 +22,7 @@
 
 /************************************************************************
  * KAMINOREFDES.h - configuration for the Sandburst Kamino Reference
- *                  design.
+ *		    design.
  ***********************************************************************/
 
 /*
@@ -36,14 +36,14 @@
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
-#define CONFIG_KAREF         1          /* Board is Kamino Ref Variant */
-#define CONFIG_440GX		  1          /* Specifc GX support      */
-#define CONFIG_4xx		  1          /* ... PPC4xx family       */
+#define CONFIG_KAREF	     1		/* Board is Kamino Ref Variant */
+#define CONFIG_440GX		  1	     /* Specifc GX support	*/
+#define CONFIG_4xx		  1	     /* ... PPC4xx family	*/
 #define CONFIG_BOARD_EARLY_INIT_F 1	     /* Call board_pre_init	*/
-#define CONFIG_MISC_INIT_F        1          /* Call board misc_init_f  */
-#define CONFIG_MISC_INIT_R        1          /* Call board misc_init_r  */
+#define CONFIG_MISC_INIT_F	  1	     /* Call board misc_init_f	*/
+#define CONFIG_MISC_INIT_R	  1	     /* Call board misc_init_r	*/
 #undef	CFG_DRAM_TEST			     /* Disable-takes long time!*/
-#define CONFIG_SYS_CLK_FREQ	  66666666   /* external freq to pll    */
+#define CONFIG_SYS_CLK_FREQ	  66666666   /* external freq to pll	*/
 
 #define CONFIG_VERY_BIG_RAM 1
 #define CONFIG_VERSION_VARIABLE
@@ -54,13 +54,13 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_SDRAM_BASE	       0x00000000    /* _must_ be 0             */
-#define CFG_FLASH_BASE	       0xfff80000    /* start of FLASH          */
-#define CFG_MONITOR_BASE       0xfff80000    /* start of monitor        */
-#define CFG_PCI_MEMBASE	       0x80000000    /* mapped pci memory       */
-#define CFG_PERIPHERAL_BASE    0xe0000000    /* internal peripherals    */
-#define CFG_ISRAM_BASE	       0xc0000000    /* internal SRAM           */
-#define CFG_PCI_BASE	       0xd0000000    /* internal PCI regs       */
+#define CFG_SDRAM_BASE	       0x00000000    /* _must_ be 0		*/
+#define CFG_FLASH_BASE	       0xfff80000    /* start of FLASH		*/
+#define CFG_MONITOR_BASE       0xfff80000    /* start of monitor	*/
+#define CFG_PCI_MEMBASE	       0x80000000    /* mapped pci memory	*/
+#define CFG_PERIPHERAL_BASE    0xe0000000    /* internal peripherals	*/
+#define CFG_ISRAM_BASE	       0xc0000000    /* internal SRAM		*/
+#define CFG_PCI_BASE	       0xd0000000    /* internal PCI regs	*/
 
 #define CFG_NVRAM_BASE_ADDR   (CFG_PERIPHERAL_BASE + 0x08000000)
 #define CFG_KAREF_FPGA_BASE   (CFG_PERIPHERAL_BASE + 0x08200000)
@@ -69,23 +69,23 @@
 #define CFG_GPIO_BASE	      (CFG_PERIPHERAL_BASE + 0x00000700)
 
 /* Here for completeness */
-#define CFG_OFEMAC_BASE       (CFG_PERIPHERAL_BASE + 0x08600000)
+#define CFG_OFEMAC_BASE	      (CFG_PERIPHERAL_BASE + 0x08600000)
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
  *----------------------------------------------------------------------*/
 #define CFG_TEMP_STACK_OCM    1
 #define CFG_OCM_DATA_ADDR     CFG_ISRAM_BASE
-#define CFG_INIT_RAM_ADDR     CFG_ISRAM_BASE /* Initial RAM address     */
-#define CFG_INIT_RAM_END      0x2000         /* End of used area in RAM */
-#define CFG_GBL_DATA_SIZE     128            /* num bytes initial data  */
+#define CFG_INIT_RAM_ADDR     CFG_ISRAM_BASE /* Initial RAM address	*/
+#define CFG_INIT_RAM_END      0x2000	     /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE     128	     /* num bytes initial data	*/
 
 #define CFG_GBL_DATA_OFFSET   (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_POST_WORD_ADDR    (CFG_GBL_DATA_OFFSET - 0x4)
 #define CFG_INIT_SP_OFFSET    CFG_POST_WORD_ADDR
 
-#define CFG_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon      */
-#define CFG_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc   */
+#define CFG_MONITOR_LEN	      (256 * 1024)   /* Rsrv 256kB for Mon	*/
+#define CFG_MALLOC_LEN	      (128 * 1024)   /* Rsrv 128kB for malloc	*/
 
 /*-----------------------------------------------------------------------
  * Serial Port
@@ -108,91 +108,91 @@
  *
  *----------------------------------------------------------------------*/
 #define CFG_NVRAM_SIZE	      (0x2000 - 8)   /* NVRAM size(8k)- RTC regs*/
-#define CONFIG_RTC_DS174x     1              /* DS1743 RTC              */
+#define CONFIG_RTC_DS174x     1		     /* DS1743 RTC		*/
 
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS   1		     /* number of banks         */
-#define CFG_MAX_FLASH_SECT    8		     /* sectors per device      */
+#define CFG_MAX_FLASH_BANKS   1		     /* number of banks		*/
+#define CFG_MAX_FLASH_SECT    8		     /* sectors per device	*/
 
 #undef	CFG_FLASH_CHECKSUM
-#define CFG_FLASH_ERASE_TOUT  120000	     /* Flash Erase TO (in ms)   */
-#define CFG_FLASH_WRITE_TOUT  500	     /* Flash Write TO(in ms)    */
+#define CFG_FLASH_ERASE_TOUT  120000	     /* Flash Erase TO (in ms)	 */
+#define CFG_FLASH_WRITE_TOUT  500	     /* Flash Write TO(in ms)	 */
 
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#define CONFIG_SPD_EEPROM     1	             /* Use SPD EEPROM for setup*/
-#define SPD_EEPROM_ADDRESS    {0x53}         /* SPD i2c spd addresses   */
+#define CONFIG_SPD_EEPROM     1		     /* Use SPD EEPROM for setup*/
+#define SPD_EEPROM_ADDRESS    {0x53}	     /* SPD i2c spd addresses	*/
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C       1              /* I2C hardware support    */
-#undef	CONFIG_SOFT_I2C                      /* I2C !bit-banged         */
-#define CFG_I2C_SPEED         400000         /* I2C speed 400kHz        */
-#define CFG_I2C_SLAVE         0x7F           /* I2C slave address       */
-#define CFG_I2C_NOPROBES      {0x69}         /* Don't probe these addrs */
-#define CONFIG_I2C_BUS1       1              /* Include i2c bus 1 supp  */
+#define CONFIG_HARD_I2C	      1		     /* I2C hardware support	*/
+#undef	CONFIG_SOFT_I2C			     /* I2C !bit-banged		*/
+#define CFG_I2C_SPEED	      400000	     /* I2C speed 400kHz	*/
+#define CFG_I2C_SLAVE	      0x7F	     /* I2C slave address	*/
+#define CFG_I2C_NOPROBES      {0x69}	     /* Don't probe these addrs */
+#define CONFIG_I2C_BUS1	      1		     /* Include i2c bus 1 supp	*/
 
 
 /*-----------------------------------------------------------------------
  * Environment
  *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_NVRAM   1	             /* Environment uses NVRAM  */
-#undef	CFG_ENV_IS_IN_FLASH		     /* ... not in flash        */
-#undef	CFG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM       */
-#define CONFIG_ENV_OVERWRITE  1              /* allow env overwrite     */
+#define CFG_ENV_IS_IN_NVRAM   1		     /* Environment uses NVRAM	*/
+#undef	CFG_ENV_IS_IN_FLASH		     /* ... not in flash	*/
+#undef	CFG_ENV_IS_IN_EEPROM		     /* ... not in EEPROM	*/
+#define CONFIG_ENV_OVERWRITE  1		     /* allow env overwrite	*/
 
-#define CFG_ENV_SIZE          0x1000         /* Size of Env vars        */
-#define CFG_ENV_ADDR          (CFG_NVRAM_BASE_ADDR)
+#define CFG_ENV_SIZE	      0x1000	     /* Size of Env vars	*/
+#define CFG_ENV_ADDR	      (CFG_NVRAM_BASE_ADDR)
 
-#define CONFIG_BOOTDELAY      5             /* 5 second autoboot */
+#define CONFIG_BOOTDELAY      5		    /* 5 second autoboot */
 
-#define CONFIG_LOADS_ECHO     1              /* echo on for serial dnld */
-#define CFG_LOADS_BAUD_CHANGE 1	             /* allow baudrate change   */
+#define CONFIG_LOADS_ECHO     1		     /* echo on for serial dnld */
+#define CFG_LOADS_BAUD_CHANGE 1		     /* allow baudrate change	*/
 
 /*-----------------------------------------------------------------------
  * Networking
  *----------------------------------------------------------------------*/
-#define CONFIG_MII	      1              /* MII PHY management      */
+#define CONFIG_MII	      1		     /* MII PHY management	*/
 #define CONFIG_NET_MULTI      1
-#define CONFIG_PHY_ADDR	      0xff           /* no phy on EMAC0         */
-#define CONFIG_PHY1_ADDR      0xff           /* no phy on EMAC1         */
-#define CONFIG_PHY2_ADDR      0x08           /* PHY addr, MGMT, EMAC2   */
-#define CONFIG_PHY3_ADDR      0x18           /* PHY addr, LCL, EMAC3    */
+#define CONFIG_PHY_ADDR	      0xff	     /* no phy on EMAC0		*/
+#define CONFIG_PHY1_ADDR      0xff	     /* no phy on EMAC1		*/
+#define CONFIG_PHY2_ADDR      0x08	     /* PHY addr, MGMT, EMAC2	*/
+#define CONFIG_PHY3_ADDR      0x18	     /* PHY addr, LCL, EMAC3	*/
 #define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1
 #define CONFIG_HAS_ETH2
 #define CONFIG_HAS_ETH3
-#define CONFIG_CIS8201_PHY    1	             /* RGMII mode for Cicada   */
-#define CONFIG_CIS8201_SHORT_ETCH 1          /* Use short etch mode     */
-#define CONFIG_PHY_GIGE       1	             /* GbE speed/duplex detect */
+#define CONFIG_CIS8201_PHY    1		     /* RGMII mode for Cicada	*/
+#define CONFIG_CIS8201_SHORT_ETCH 1	     /* Use short etch mode	*/
+#define CONFIG_PHY_GIGE	      1		     /* GbE speed/duplex detect */
 #define CONFIG_PHY_RESET_DELAY 1000
-#define CONFIG_NETMASK        255.255.0.0
-#define CONFIG_ETHADDR        00:00:00:00:00:00 /* No EMAC 0 support    */
-#define CONFIG_ETH1ADDR       00:00:00:00:00:00 /* No EMAC 1 support    */
-#define CFG_RX_ETH_BUFFER     32             /* #eth rx buff & descrs   */
+#define CONFIG_NETMASK	      255.255.0.0
+#define CONFIG_ETHADDR	      00:00:00:00:00:00 /* No EMAC 0 support	*/
+#define CONFIG_ETH1ADDR	      00:00:00:00:00:00 /* No EMAC 1 support	*/
+#define CFG_RX_ETH_BUFFER     32	     /* #eth rx buff & descrs	*/
 
 
 /*-----------------------------------------------------------------------
  * Console/Commands/Parser
  *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL  | \
-                                CFG_CMD_PCI     | \
-                                CFG_CMD_IRQ     | \
-                                CFG_CMD_I2C     | \
-                                CFG_CMD_DHCP    | \
-                                CFG_CMD_DATE    | \
-                                CFG_CMD_BEDBUG  | \
-                                CFG_CMD_PING    | \
-                                CFG_CMD_DIAG    | \
-                                CFG_CMD_MII     | \
-                                CFG_CMD_NET     | \
-                                CFG_CMD_ELF     | \
-                                CFG_CMD_IDE     | \
-                                CFG_CMD_FAT)
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_BEDBUG	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_IDE	| \
+				CFG_CMD_FAT)
 
 /* Include NetConsole support */
 #define CONFIG_NETCONSOLE
@@ -200,16 +200,16 @@
 /* Include auto complete with tabs */
 #define CONFIG_AUTO_COMPLETE 1
 #define CFG_AUTO_COMPLETE    1
-#define CFG_ALT_MEMTEST      1       /* use real memory test     */
+#define CFG_ALT_MEMTEST	     1	     /* use real memory test	 */
 
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
-#define CFG_LONGHELP                         /* undef to save memory    */
-#define CFG_PROMPT	      "KaRefDes=> "  /* Monitor Command Prompt  */
+#define CFG_LONGHELP			     /* undef to save memory	*/
+#define CFG_PROMPT	      "KaRefDes=> "  /* Monitor Command Prompt	*/
 
-#define CFG_HUSH_PARSER        1             /* HUSH for ext'd cli      */
+#define CFG_HUSH_PARSER	       1	     /* HUSH for ext'd cli	*/
 #define CFG_PROMPT_HUSH_PS2    "> "
 
 
@@ -217,20 +217,20 @@
  * Console Buffer
  *----------------------------------------------------------------------*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE	      1024           /* Console I/O Buffer Size */
+#define CFG_CBSIZE	      1024	     /* Console I/O Buffer Size */
 #else
-#define CFG_CBSIZE	      256            /* Console I/O Buffer Size */
+#define CFG_CBSIZE	      256	     /* Console I/O Buffer Size */
 #endif
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-                                             /* Print Buffer Size       */
-#define CFG_MAXARGS	      16             /* max number of cmd args  */
-#define CFG_BARGSIZE	      CFG_CBSIZE     /* Boot Arg Buffer Size    */
+					     /* Print Buffer Size	*/
+#define CFG_MAXARGS	      16	     /* max number of cmd args	*/
+#define CFG_BARGSIZE	      CFG_CBSIZE     /* Boot Arg Buffer Size	*/
 
 /*-----------------------------------------------------------------------
  * Memory Test
  *----------------------------------------------------------------------*/
-#define CFG_MEMTEST_START     0x0400000      /* memtest works on        */
-#define CFG_MEMTEST_END       0x0C00000	     /* 4 ... 12 MB in DRAM     */
+#define CFG_MEMTEST_START     0x0400000	     /* memtest works on	*/
+#define CFG_MEMTEST_END	      0x0C00000	     /* 4 ... 12 MB in DRAM	*/
 
 /*-----------------------------------------------------------------------
  * Compact Flash (in true IDE mode)
@@ -238,7 +238,7 @@
 #undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
 #undef	CONFIG_IDE_LED			/* no led for ide supported	*/
 
-#define	CONFIG_IDE_RESET		/* reset for ide supported	*/
+#define CONFIG_IDE_RESET		/* reset for ide supported	*/
 #define CFG_IDE_MAXBUS		1	/* max. 1 IDE busses	*/
 #define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */
 
@@ -248,25 +248,25 @@
 #define CFG_ATA_REG_OFFSET	0x0000	 /* Offset for normal register accesses*/
 #define CFG_ATA_ALT_OFFSET	0x100000 /* Offset for alternate registers */
 
-#define CFG_ATA_STRIDE          2        /* Directly connected CF, needs a stride
-                                            to get to the correct offset */
-#define CONFIG_DOS_PARTITION  1              /* Include dos partition   */
+#define CFG_ATA_STRIDE		2	 /* Directly connected CF, needs a stride
+					    to get to the correct offset */
+#define CONFIG_DOS_PARTITION  1		     /* Include dos partition	*/
 
 /*-----------------------------------------------------------------------
  * PCI
  *----------------------------------------------------------------------*/
 /* General PCI */
-#define CONFIG_PCI                           /* include pci support     */
-#define CONFIG_PCI_PNP                       /* do pci plug-and-play    */
-#define CONFIG_PCI_SCAN_SHOW                 /* show pci devices        */
+#define CONFIG_PCI			     /* include pci support	*/
+#define CONFIG_PCI_PNP			     /* do pci plug-and-play	*/
+#define CONFIG_PCI_SCAN_SHOW		     /* show pci devices	*/
 #define CFG_PCI_TARGBASE      (CFG_PCI_MEMBASE)
 
 /* Board-specific PCI */
-#define CFG_PCI_PRE_INIT                     /* enable board pci_pre_init*/
-#define CFG_PCI_TARGET_INIT                  /* let board init pci target*/
+#define CFG_PCI_PRE_INIT		     /* enable board pci_pre_init*/
+#define CFG_PCI_TARGET_INIT		     /* let board init pci target*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x17BA       /* Sandburst */
-#define CFG_PCI_SUBSYS_DEVICEID 0xcafe       /* Whatever */
+#define CFG_PCI_SUBSYS_VENDORID 0x17BA	     /* Sandburst */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	     /* Whatever */
 
 /*
  * For booting Linux, the board info and command line data
@@ -277,10 +277,10 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE       8192           /* For IBM 405 CPUs        */
+#define CFG_DCACHE_SIZE	      8192	     /* For IBM 405 CPUs	*/
 #define CFG_CACHELINE_SIZE    32
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT   5              /* log base 2 of the above */
+#define CFG_CACHELINE_SHIFT   5		     /* log base 2 of the above */
 #endif
 
 /*
@@ -288,22 +288,22 @@
  *
  * Boot Flags
  */
-#define BOOTFLAG_COLD         0x01           /* Normal PowerOn: Boot from FLASH */
-#define BOOTFLAG_WARM         0x02           /* Software reboot */
+#define BOOTFLAG_COLD	      0x01	     /* Normal PowerOn: Boot from FLASH */
+#define BOOTFLAG_WARM	      0x02	     /* Software reboot */
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud   */
-#define CONFIG_KGDB_SER_INDEX 2              /* kgdb serial port        */
+#define CONFIG_KGDB_BAUDRATE  230400	     /* kgdb serial port baud	*/
+#define CONFIG_KGDB_SER_INDEX 2		     /* kgdb serial port	*/
 #endif
 
 /*-----------------------------------------------------------------------
  * Miscellaneous configurable options
  *----------------------------------------------------------------------*/
-#undef CONFIG_WATCHDOG			     /* watchdog disabled       */
-#define CFG_LOAD_ADDR         0x8000000      /* default load address    */
-#define CFG_EXTBDINFO         1	             /* use extended board_info */
+#undef CONFIG_WATCHDOG			     /* watchdog disabled	*/
+#define CFG_LOAD_ADDR	      0x8000000	     /* default load address	*/
+#define CFG_EXTBDINFO	      1		     /* use extended board_info */
 
-#define CFG_HZ                100            /* decr freq: 1 ms ticks   */
+#define CFG_HZ		      100	     /* decr freq: 1 ms ticks	*/
 
 
 #endif	/* __CONFIG_H */