Blackfin: convert specific pre/post config headers to common method

The Blackfin port was using asm/blackfin-config-{pre,post}.h to setup
common Blackfin board defines.  The common method now is to use config.h,
so convert blackfin-config-post.h to that.  Rename the still Blackfin
specific blackfin-config-pre.h to config-pre.h so the naming conventions
at least line up.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 0 insertions, 74 deletions

diff --git a/include/asm-blackfin/blackfin-config-pre.h b/include/asm-blackfin/blackfin-config-pre.h
deleted file mode 100644
index 44f9c2fe66..0000000000
--- a/include/asm-blackfin/blackfin-config-pre.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * blackfin-config-pre.h - common defines for Blackfin boards in config.h
- *
- * Copyright (c) 2007 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __ASM_BLACKFIN_CONFIG_PRE_H__
-#define __ASM_BLACKFIN_CONFIG_PRE_H__
-
-/* Misc helper functions */
-#define XMK_STR(x) #x
-#define MK_STR(x) XMK_STR(x)
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-/* Bootmode defines -- your config needs to select this via CONFIG_BFIN_BOOT_MODE.
- * Depending on your cpu, some of these may not be valid, check your HRM.
- * The actual values here are meaningless as long as they're unique.
- */
-#define BFIN_BOOT_BYPASS      1       /* bypass bootrom */
-#define BFIN_BOOT_PARA        2       /* boot ldr out of parallel flash */
-#define BFIN_BOOT_SPI_MASTER  3       /* boot ldr out of serial flash */
-#define BFIN_BOOT_SPI_SLAVE   4       /* boot ldr as spi slave */
-#define BFIN_BOOT_TWI_MASTER  5       /* boot ldr over twi device */
-#define BFIN_BOOT_TWI_SLAVE   6       /* boot ldr over twi slave */
-#define BFIN_BOOT_UART        7       /* boot ldr over uart */
-#define BFIN_BOOT_IDLE        8       /* do nothing, just idle */
-#define BFIN_BOOT_FIFO        9       /* boot ldr out of FIFO */
-#define BFIN_BOOT_MEM         10      /* boot ldr out of memory (warmboot) */
-#define BFIN_BOOT_16HOST_DMA  11      /* boot ldr from 16-bit host dma */
-#define BFIN_BOOT_8HOST_DMA   12      /* boot ldr from 8-bit host dma */
-#define BFIN_BOOT_NAND        13      /* boot ldr from nand flash */
-
-#ifndef __ASSEMBLY__
-static inline const char *get_bfin_boot_mode(int bfin_boot)
-{
-	switch (bfin_boot) {
-	case BFIN_BOOT_BYPASS:     return "bypass";
-	case BFIN_BOOT_PARA:       return "parallel flash";
-	case BFIN_BOOT_SPI_MASTER: return "spi flash";
-	case BFIN_BOOT_SPI_SLAVE:  return "spi slave";
-	case BFIN_BOOT_TWI_MASTER: return "i2c flash";
-	case BFIN_BOOT_TWI_SLAVE:  return "i2c slave";
-	case BFIN_BOOT_UART:       return "uart";
-	case BFIN_BOOT_IDLE:       return "idle";
-	case BFIN_BOOT_FIFO:       return "fifo";
-	case BFIN_BOOT_MEM:        return "memory";
-	case BFIN_BOOT_16HOST_DMA: return "16bit dma";
-	case BFIN_BOOT_8HOST_DMA:  return "8bit dma";
-	case BFIN_BOOT_NAND:       return "nand flash";
-	default:                   return "INVALID";
-	}
-}
-#endif
-
-/* Most bootroms allow for EVT1 redirection */
-#if ((defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__)) \
-     && __SILICON_REVISION__ < 3) || defined(__ADSPBF561__)
-# undef CONFIG_BFIN_BOOTROM_USES_EVT1
-#else
-# define CONFIG_BFIN_BOOTROM_USES_EVT1
-#endif
-
-/* Define the default SPI CS used when booting out of SPI */
-#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || defined(__ADSPBF533__) || \
-    defined(__ADSPBF538__) || defined(__ADSPBF539__) || defined(__ADSPBF561__) || \
-    defined(__ADSPBF51x__)
-# define BFIN_BOOT_SPI_SSEL 2
-#else
-# define BFIN_BOOT_SPI_SSEL 1
-#endif
-
-#endif