summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2015-09-02 14:29:12 +0200
committerTom Rini <trini@konsulko.com>2015-09-11 17:15:13 -0400
commit1a103c6caa0b27fcd3798267b980444f5459860f (patch)
tree5cf3d03804ff4d29d1968fefbbcf6ea8a53222b8 /drivers
parentb9599dd857b3f6ed9c7c7e7438dffb84ee5ce1a0 (diff)
mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600
This patch adds support for 4-bit ECC BCH4 for the SPEAr600 SoC. This can be used by boards equipped with a NAND chip that requires 4-bit ECC strength. The SPEAr600 HW ECC only supports 1-bit ECC strength. To enable SW BCH4, you need to specify this in your config header: #define CONFIG_NAND_ECC_BCH #define CONFIG_BCH And use the command "nandecc bch4" to select this ECC scheme upon runtime. Tested on SPEAr600 x600 board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Scott Wood <scottwood@freescale.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/nand/fsmc_nand.c40
1 files changed, 40 insertions, 0 deletions
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 567eff0914..0976a67ff8 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -13,6 +13,7 @@
#include <asm/io.h>
#include <linux/bitops.h>
#include <linux/err.h>
+#include <linux/mtd/nand_bch.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/fsmc_nand.h>
#include <asm/arch/hardware.h>
@@ -390,6 +391,45 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
return 0;
}
+#ifndef CONFIG_SPL_BUILD
+/*
+ * fsmc_nand_switch_ecc - switch the ECC operation between different engines
+ *
+ * @eccstrength - the number of bits that could be corrected
+ * (1 - HW, 4 - SW BCH4)
+ */
+int __maybe_unused fsmc_nand_switch_ecc(uint32_t eccstrength)
+{
+ struct nand_chip *nand;
+ struct mtd_info *mtd;
+ int err;
+
+ mtd = &nand_info[nand_curr_device];
+ nand = mtd->priv;
+
+ /* Setup the ecc configurations again */
+ if (eccstrength == 1) {
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.bytes = 3;
+ nand->ecc.strength = 1;
+ nand->ecc.layout = &fsmc_ecc1_layout;
+ nand->ecc.correct = nand_correct_data;
+ } else {
+ nand->ecc.mode = NAND_ECC_SOFT_BCH;
+ nand->ecc.calculate = nand_bch_calculate_ecc;
+ nand->ecc.correct = nand_bch_correct_data;
+ nand->ecc.bytes = 7;
+ nand->ecc.strength = 4;
+ nand->ecc.layout = NULL;
+ }
+
+ /* Update NAND handling after ECC mode switch */
+ err = nand_scan_tail(mtd);
+
+ return err;
+}
+#endif /* CONFIG_SPL_BUILD */
+
int fsmc_nand_init(struct nand_chip *nand)
{
static int chip_nr;