summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2010-08-18 21:19:00 +0200
committerWolfgang Denk <wd@denx.de>2010-08-18 21:19:00 +0200
commit5549d22b656550d36b2cc46743c7220ab0e9dcc4 (patch)
treeacc88f5980b8ca5999e05e9a86429e5b397cdd7e /drivers
parentae37a0704a8a27e47471f541a68b88370cd14aa8 (diff)
parent9ce2c4b7f79c5bdc1697a6979a0d33e51c3cf57d (diff)
Merge branch 'master' of /home/wd/git/u-boot/master
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/cfi_flash.c62
-rw-r--r--drivers/usb/musb/Makefile1
-rw-r--r--drivers/usb/musb/am35x.c150
-rw-r--r--drivers/usb/musb/am35x.h94
-rw-r--r--drivers/usb/musb/musb_core.c6
-rw-r--r--drivers/usb/musb/musb_udc.c2
6 files changed, 288 insertions, 27 deletions
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 2d09caf7387..1191ef02f80 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1096,8 +1096,30 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
return rcode;
}
-/*-----------------------------------------------------------------------
- */
+#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
+static int sector_erased(flash_info_t *info, int i)
+{
+ int k;
+ int size;
+ volatile unsigned long *flash;
+
+ /*
+ * Check if whole sector is erased
+ */
+ size = flash_sector_size(info, i);
+ flash = (volatile unsigned long *) info->start[i];
+ /* divide by 4 for longword access */
+ size = size >> 2;
+
+ for (k = 0; k < size; k++) {
+ if (*flash++ != 0xffffffff)
+ return 0; /* not erased */
+ }
+
+ return 1; /* erased */
+}
+#endif /* CONFIG_SYS_FLASH_EMPTY_INFO */
+
void flash_print_info (flash_info_t * info)
{
int i;
@@ -1142,8 +1164,10 @@ void flash_print_info (flash_info_t * info)
printf ("Unknown (%d)", info->vendor);
break;
}
- printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x%02X",
- info->manufacturer_id, info->device_id);
+ printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x",
+ info->manufacturer_id);
+ printf (info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X",
+ info->device_id);
if (info->device_id == 0x7E) {
printf("%04X", info->device_id2);
}
@@ -1159,32 +1183,15 @@ void flash_print_info (flash_info_t * info)
puts ("\n Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
+ if (ctrlc())
+ break;
if ((i % 5) == 0)
- printf ("\n");
+ putc('\n');
#ifdef CONFIG_SYS_FLASH_EMPTY_INFO
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- /*
- * Check if whole sector is erased
- */
- size = flash_sector_size(info, i);
- erased = 1;
- flash = (volatile unsigned long *) info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k = 0; k < size; k++) {
- if (*flash++ != 0xffffffff) {
- erased = 0;
- break;
- }
- }
-
/* print empty and read-only info */
printf (" %08lX %c %s ",
info->start[i],
- erased ? 'E' : ' ',
+ sector_erased(info, i) ? 'E' : ' ',
info->protect[i] ? "RO" : " ");
#else /* ! CONFIG_SYS_FLASH_EMPTY_INFO */
printf (" %08lX %s ",
@@ -1477,8 +1484,9 @@ static void cmdset_intel_read_jedec_ids(flash_info_t *info)
udelay(1000); /* some flash are slow to respond */
info->manufacturer_id = flash_read_uchar (info,
FLASH_OFFSET_MANUFACTURER_ID);
- info->device_id = flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID);
+ info->device_id = (info->chipwidth == FLASH_CFI_16BIT) ?
+ flash_read_word (info, FLASH_OFFSET_DEVICE_ID) :
+ flash_read_uchar (info, FLASH_OFFSET_DEVICE_ID);
flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
}
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 397f5fe7a38..7d23e06a58c 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_USB_BLACKFIN) += blackfin_usb.o
COBJS-$(CONFIG_USB_DAVINCI) += davinci.o
COBJS-$(CONFIG_USB_OMAP3) += omap3.o
COBJS-$(CONFIG_USB_DA8XX) += da8xx.o
+COBJS-$(CONFIG_USB_AM35X) += am35x.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
new file mode 100644
index 00000000000..1706c138bd5
--- /dev/null
+++ b/drivers/usb/musb/am35x.c
@@ -0,0 +1,150 @@
+/*
+ * am35x.c - TI's AM35x platform specific usb wrapper functions.
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Based on drivers/usb/musb/da8xx.c
+ *
+ * Copyright (c) 2010 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+
+#include "am35x.h"
+
+/* MUSB platform configuration */
+struct musb_config musb_cfg = {
+ .regs = (struct musb_regs *)AM35X_USB_OTG_CORE_BASE,
+ .timeout = AM35X_USB_OTG_TIMEOUT,
+ .musb_speed = 0,
+};
+
+/*
+ * Enable the USB phy
+ */
+static u8 phy_on(void)
+{
+ u32 devconf2;
+ u32 timeout;
+
+ devconf2 = readl(&am35x_scm_general_regs->devconf2);
+
+ devconf2 &= ~(DEVCONF2_RESET | DEVCONF2_PHYPWRDN | DEVCONF2_OTGPWRDN |
+ DEVCONF2_OTGMODE | DEVCONF2_REFFREQ |
+ DEVCONF2_PHY_GPIOMODE);
+ devconf2 |= DEVCONF2_SESENDEN | DEVCONF2_VBDTCTEN | DEVCONF2_PHY_PLLON |
+ DEVCONF2_REFFREQ_13MHZ | DEVCONF2_DATPOL;
+
+ writel(devconf2, &am35x_scm_general_regs->devconf2);
+
+ /* wait until the USB phy is turned on */
+ timeout = musb_cfg.timeout;
+ while (timeout--)
+ if (readl(&am35x_scm_general_regs->devconf2) & DEVCONF2_PHYCKGD)
+ return 1;
+
+ /* USB phy was not turned on */
+ return 0;
+}
+
+/*
+ * Disable the USB phy
+ */
+static void phy_off(void)
+{
+ u32 devconf2;
+
+ /*
+ * Power down the on-chip PHY.
+ */
+ devconf2 = readl(&am35x_scm_general_regs->devconf2);
+
+ devconf2 &= ~DEVCONF2_PHY_PLLON;
+ devconf2 |= DEVCONF2_PHYPWRDN | DEVCONF2_OTGPWRDN;
+ writel(devconf2, &am35x_scm_general_regs->devconf2);
+}
+
+/*
+ * This function performs platform specific initialization for usb0.
+ */
+int musb_platform_init(void)
+{
+ u32 revision;
+ u32 sw_reset;
+
+ /* global usb reset */
+ sw_reset = readl(&am35x_scm_general_regs->ip_sw_reset);
+ sw_reset |= (1 << 0);
+ writel(sw_reset, &am35x_scm_general_regs->ip_sw_reset);
+ sw_reset &= ~(1 << 0);
+ writel(sw_reset, &am35x_scm_general_regs->ip_sw_reset);
+
+ /* reset the controller */
+ writel(0x1, &am35x_usb_regs->control);
+ udelay(5000);
+
+ /* start the on-chip usb phy and its pll */
+ if (phy_on() == 0)
+ return -1;
+
+ /* Returns zero if e.g. not clocked */
+ revision = readl(&am35x_usb_regs->revision);
+ if (revision == 0)
+ return -1;
+
+ return 0;
+}
+
+/*
+ * This function performs platform specific deinitialization for usb0.
+ */
+void musb_platform_deinit(void)
+{
+ /* Turn off the phy */
+ phy_off();
+}
+
+/*
+ * This function reads data from endpoint fifo for AM35x
+ * which supports only 32bit read operation.
+ *
+ * ep - endpoint number
+ * length - number of bytes to read from FIFO
+ * fifo_data - pointer to data buffer into which data is read
+ */
+__attribute__((weak))
+void read_fifo(u8 ep, u32 length, void *fifo_data)
+{
+ u8 *data = (u8 *)fifo_data;
+ u32 val;
+ int i;
+
+ /* select the endpoint index */
+ writeb(ep, &musbr->index);
+
+ if (length > 4) {
+ for (i = 0; i < (length >> 2); i++) {
+ val = readl(&musbr->fifox[ep]);
+ memcpy(data, &val, 4);
+ data += 4;
+ }
+ length %= 4;
+ }
+ if (length > 0) {
+ val = readl(&musbr->fifox[ep]);
+ memcpy(data, &val, length);
+ }
+}
diff --git a/drivers/usb/musb/am35x.h b/drivers/usb/musb/am35x.h
new file mode 100644
index 00000000000..756c3aed83a
--- /dev/null
+++ b/drivers/usb/musb/am35x.h
@@ -0,0 +1,94 @@
+/*
+ * am35x.h - TI's AM35x platform specific usb wrapper definitions.
+ *
+ * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
+ *
+ * Based on drivers/usb/musb/da8xx.h
+ *
+ * Copyright (c) 2010 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __AM35X_USB_H__
+#define __AM35X_USB_H__
+
+#include <asm/arch/am35x_def.h>
+#include "musb_core.h"
+
+/* Base address of musb wrapper */
+#define AM35X_USB_OTG_BASE 0x5C040000
+
+/* Base address of musb core */
+#define AM35X_USB_OTG_CORE_BASE (AM35X_USB_OTG_BASE + 0x400)
+
+/* Timeout for AM35x usb module */
+#define AM35X_USB_OTG_TIMEOUT 0x3FFFFFF
+
+/*
+ * AM35x platform USB wrapper register overlay.
+ */
+struct am35x_usb_regs {
+ u32 revision;
+ u32 control;
+ u32 status;
+ u32 emulation;
+ u32 reserved0[1];
+ u32 autoreq;
+ u32 srpfixtime;
+ u32 ep_intsrc;
+ u32 ep_intsrcset;
+ u32 ep_intsrcclr;
+ u32 ep_intmsk;
+ u32 ep_intmskset;
+ u32 ep_intmskclr;
+ u32 ep_intsrcmsked;
+ u32 reserved1[1];
+ u32 core_intsrc;
+ u32 core_intsrcset;
+ u32 core_intsrcclr;
+ u32 core_intmsk;
+ u32 core_intmskset;
+ u32 core_intmskclr;
+ u32 core_intsrcmsked;
+ u32 reserved2[1];
+ u32 eoi;
+ u32 mop_sop_en;
+ u32 reserved3[2];
+ u32 txmode;
+ u32 rxmode;
+ u32 epcount_mode;
+};
+
+#define am35x_usb_regs ((struct am35x_usb_regs *)AM35X_USB_OTG_BASE)
+
+/* USB 2.0 PHY Control */
+#define DEVCONF2_PHY_GPIOMODE (1 << 23)
+#define DEVCONF2_OTGMODE (3 << 14)
+#define DEVCONF2_SESENDEN (1 << 13) /* Vsess_end comparator */
+#define DEVCONF2_VBDTCTEN (1 << 12) /* Vbus comparator */
+#define DEVCONF2_REFFREQ_24MHZ (2 << 8)
+#define DEVCONF2_REFFREQ_26MHZ (7 << 8)
+#define DEVCONF2_REFFREQ_13MHZ (6 << 8)
+#define DEVCONF2_REFFREQ (0xf << 8)
+#define DEVCONF2_PHYCKGD (1 << 7)
+#define DEVCONF2_VBUSSENSE (1 << 6)
+#define DEVCONF2_PHY_PLLON (1 << 5) /* override PLL suspend */
+#define DEVCONF2_RESET (1 << 4)
+#define DEVCONF2_PHYPWRDN (1 << 3)
+#define DEVCONF2_OTGPWRDN (1 << 2)
+#define DEVCONF2_DATPOL (1 << 1)
+
+#endif /* __AM35X_USB_H__ */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index dc740cf18e4..6fe2c39bce8 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -142,6 +142,11 @@ void write_fifo(u8 ep, u32 length, void *fifo_data)
}
/*
+ * AM35x supports only 32bit read operations so
+ * use seperate read_fifo() function for it.
+ */
+#ifndef CONFIG_USB_AM35X
+/*
* This function reads data from endpoint fifo
*
* ep - endpoint number
@@ -160,3 +165,4 @@ void read_fifo(u8 ep, u32 length, void *fifo_data)
while (length--)
*data++ = readb(&musbr->fifox[ep]);
}
+#endif /* CONFIG_USB_AM35X */
diff --git a/drivers/usb/musb/musb_udc.c b/drivers/usb/musb/musb_udc.c
index fc43cf4f09d..6f6ed61d08b 100644
--- a/drivers/usb/musb/musb_udc.c
+++ b/drivers/usb/musb/musb_udc.c
@@ -57,6 +57,8 @@
#include "musb_core.h"
#if defined(CONFIG_USB_OMAP3)
#include "omap3.h"
+#elif defined(CONFIG_USB_AM35X)
+#include "am35x.h"
#elif defined(CONFIG_USB_DAVINCI)
#include "davinci.h"
#endif