Merge git://git.denx.de/u-boot-microblaze

Xilinx changes for v2018.11-rc2-v2

FPGA:
- Fix SPL fpga loading from FIT

ARM64:
- Fix gic accesses in EL2/EL1

Xilinx:
- Add dlc20 board support
- Add Versal board support
- Sync defconfigs
- Enable MP via Kconfig
- Add missing efuse node
- Enable CDC for zcu100

cmd:
- Fix kgdb Kconfig dependency

4 files changed, 8 insertions, 4 deletions

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 0a0d4aaf6ca..27246ee4658 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -538,7 +538,7 @@ config MMC_SDHCI_TEGRA
 
 config MMC_SDHCI_ZYNQ
 	bool "Arasan SDHCI controller support"
-	depends on ARCH_ZYNQ || ARCH_ZYNQMP
+	depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
 	depends on DM_MMC && OF_CONTROL && BLK
 	depends on MMC_SDHCI
 	help
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 5441da47d13..f1f0e2d94ef 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -344,7 +344,7 @@ config XILINX_EMACLITE
 	  This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
 
 config ZYNQ_GEM
-	depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP)
+	depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL)
 	select PHYLIB
 	bool "Xilinx Ethernet GEM"
 	help
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index e22d048e8f0..bc33126536c 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -461,6 +461,7 @@ static int zynq_gem_init(struct udevice *dev)
 		break;
 	}
 
+#if !defined(CONFIG_ARCH_VERSAL)
 	ret = clk_set_rate(&priv->clk, clk_rate);
 	if (IS_ERR_VALUE(ret) && ret != (unsigned long)-ENOSYS) {
 		dev_err(dev, "failed to set tx clock rate\n");
@@ -472,6 +473,9 @@ static int zynq_gem_init(struct udevice *dev)
 		dev_err(dev, "failed to enable tx clock\n");
 		return ret;
 	}
+#else
+	debug("requested clk_rate %ld\n", clk_rate);
+#endif
 
 	setbits_le32(&regs->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK |
 					ZYNQ_GEM_NWCTRL_TXEN_MASK);
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 1df6876e9bd..516188ea88e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -243,7 +243,7 @@ config XILINX_SPI
 
 config ZYNQ_SPI
 	bool "Zynq SPI driver"
-	depends on ARCH_ZYNQ || ARCH_ZYNQMP
+	depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL
 	help
 	  Enable the Zynq SPI driver. This driver can be used to
 	  access the SPI NOR flash on platforms embedding this Zynq
@@ -260,7 +260,7 @@ config ZYNQ_QSPI
 
 config ZYNQMP_GQSPI
 	bool "Configure ZynqMP Generic QSPI"
-	depends on ARCH_ZYNQMP
+	depends on ARCH_ZYNQMP || ARCH_VERSAL
 	help
 	  This option is used to enable ZynqMP QSPI controller driver which
 	  is used to communicate with qspi flash devices.