[Strange. I _did_ check these in before. Seems SF restored an old

version of the repository???]

* Patch by Reinhard Meyer, 09 Jan 2004:
  - add RTC support for MPC5200 based boards (requires RTC_XTAL)

* Add support for IDE LED on BMS2003 board
  (exclusive with status LED!)

* Add support for PS/2 keyboard (used with PS/2 multiplexor on
  BMS2003 board)

* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
  Add common files for "emk" boards

5 files changed, 1169 insertions, 2 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index 15fb378803..2bdabae8ec 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -36,12 +36,13 @@ OBJS	= 3c589.o 5701rls.o ali512x.o \
 	  ns16550.o ns8382x.o ns87308.o \
 	  pci.o pci_auto.o pci_indirect.o \
 	  pcnet.o plb2800_eth.o \
+	  ps2ser.o ps2mult.o pc_keyb.o keyboard.o \
 	  rtl8019.o rtl8139.o \
 	  s3c24x0_i2c.o sed13806.o serial.o \
 	  serial_max3100.o \
 	  smc91111.o smiLynxEM.o              sym53c8xx.o \
-	  ti_pci1410a.o tigon3.o w83c553f.o \
-	  status_led.o
+	  status_led.o \
+	  ti_pci1410a.o tigon3.o w83c553f.o
 
 ## Disabled for now:
 ##	  cs8900.o ct69000.o dataflash.o dc2114x.o ds1722.o \
diff --git a/drivers/keyboard.c b/drivers/keyboard.c
new file mode 100644
index 0000000000..7ba87be685
--- /dev/null
+++ b/drivers/keyboard.c
@@ -0,0 +1,288 @@
+/***********************************************************************
+ *
+ * (C) Copyright 2004
+ * DENX Software Engineering
+ * Wolfgang Denk, wd@denx.de
+ * All rights reserved.
+ *
+ * Keyboard driver
+ *
+ ***********************************************************************/
+
+#include <common.h>
+
+#ifdef CONFIG_PS2KBD
+
+#include <devices.h>
+#include <keyboard.h>
+
+#undef KBG_DEBUG
+
+#ifdef KBG_DEBUG
+#define	PRINTF(fmt,args...)	printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+
+#define	DEVNAME			"kbd"
+
+#define	LED_SCR			0x01	/* scroll lock led */
+#define	LED_CAP			0x04	/* caps lock led */
+#define	LED_NUM			0x02	/* num lock led */
+
+#define	KBD_BUFFER_LEN		0x20  /* size of the keyboardbuffer */
+
+static volatile char kbd_buffer[KBD_BUFFER_LEN];
+static volatile int in_pointer = 0;
+static volatile int out_pointer = 0;
+
+static unsigned char leds = 0;
+static unsigned char num_lock = 0;
+static unsigned char caps_lock = 0;
+static unsigned char scroll_lock = 0;
+static unsigned char shift = 0;
+static unsigned char ctrl = 0;
+static unsigned char alt = 0;
+static unsigned char e0 = 0;
+
+/******************************************************************
+ * Queue handling
+ ******************************************************************/
+
+/* puts character in the queue and sets up the in and out pointer */
+static void kbd_put_queue(char data)
+{
+	if((in_pointer+1)==KBD_BUFFER_LEN) {
+		if(out_pointer==0) {
+			return; /* buffer full */
+		} else{
+			in_pointer=0;
+		}
+	} else {
+		if((in_pointer+1)==out_pointer)
+			return; /* buffer full */
+		in_pointer++;
+	}
+	kbd_buffer[in_pointer]=data;
+	return;
+}
+
+/* test if a character is in the queue */
+static int kbd_testc(void)
+{
+	if(in_pointer==out_pointer)
+		return(0); /* no data */
+	else
+		return(1);
+}
+
+/* gets the character from the queue */
+static int kbd_getc(void)
+{
+	char c;
+	while(in_pointer==out_pointer);
+	if((out_pointer+1)==KBD_BUFFER_LEN)
+		out_pointer=0;
+	else
+		out_pointer++;
+	c=kbd_buffer[out_pointer];
+	return (int)c;
+
+}
+
+/* Simple translation table for the keys */
+
+static unsigned char kbd_plain_xlate[] = {
+	0xff,0x1b, '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', '-', '=','\b','\t',	/* 0x00 - 0x0f */
+	 'q', 'w', 'e', 'r', 't', 'y', 'u', 'i', 'o', 'p', '[', ']','\r',0xff, 'a', 's',	/* 0x10 - 0x1f */
+	 'd', 'f', 'g', 'h', 'j', 'k', 'l', ';','\'', '`',0xff,'\\', 'z', 'x', 'c', 'v',	/* 0x20 - 0x2f */
+	 'b', 'n', 'm', ',', '.', '/',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff,	/* 0x30 - 0x3f */
+	0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1',	/* 0x40 - 0x4f */
+	 '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,  /* 0x50 - 0x5F */
+	'\r',0xff,0xff
+	};
+
+static unsigned char kbd_shift_xlate[] = {
+	0xff,0x1b, '!', '@', '#', '$', '%', '^', '&', '*', '(', ')', '_', '+','\b','\t',	/* 0x00 - 0x0f */
+	 'Q', 'W', 'E', 'R', 'T', 'Y', 'U', 'I', 'O', 'P', '{', '}','\r',0xff, 'A', 'S',	/* 0x10 - 0x1f */
+	 'D', 'F', 'G', 'H', 'J', 'K', 'L', ':', '"', '~',0xff, '|', 'Z', 'X', 'C', 'V',	/* 0x20 - 0x2f */
+	 'B', 'N', 'M', '<', '>', '?',0xff,0xff,0xff, ' ',0xff,0xff,0xff,0xff,0xff,0xff,	/* 0x30 - 0x3f */
+	0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1',	/* 0x40 - 0x4f */
+	 '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,  /* 0x50 - 0x5F */
+	'\r',0xff,0xff
+	};
+
+static unsigned char kbd_ctrl_xlate[] = {
+	0xff,0x1b, '1',0x00, '3', '4', '5',0x1E, '7', '8', '9', '0',0x1F, '=','\b','\t',	/* 0x00 - 0x0f */
+	0x11,0x17,0x05,0x12,0x14,0x18,0x15,0x09,0x0f,0x10,0x1b,0x1d,'\n',0xff,0x01,0x13,	/* 0x10 - 0x1f */
+	0x04,0x06,0x08,0x09,0x0a,0x0b,0x0c, ';','\'', '~',0x00,0x1c,0x1a,0x18,0x03,0x16,	/* 0x20 - 0x2f */
+	0x02,0x0e,0x0d, '<', '>', '?',0xff,0xff,0xff,0x00,0xff,0xff,0xff,0xff,0xff,0xff,	/* 0x30 - 0x3f */
+	0xff,0xff,0xff,0xff,0xff,0xff,0xff, '7', '8', '9', '-', '4', '5', '6', '+', '1',	/* 0x40 - 0x4f */
+	 '2', '3', '0', '.',0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,  /* 0x50 - 0x5F */
+	'\r',0xff,0xff
+	};
+
+
+void handle_scancode(unsigned char scancode)
+{
+	unsigned char keycode;
+
+	/*  Convert scancode to keycode */
+	PRINTF("scancode %x\n",scancode);
+	if(scancode==0xe0) {
+		e0=1; /* special charakters */
+		return;
+	}
+	if(e0==1) {
+		e0=0; /* delete flag */
+		if(!(	((scancode&0x7F)==0x38)|| /* the right ctrl key */
+					((scancode&0x7F)==0x1D)|| /* the right alt key */
+					((scancode&0x7F)==0x35)||	/* the right '/' key */
+					((scancode&0x7F)==0x1C) ))  /* the right enter key */
+			/* we swallow unknown e0 codes */
+			return;
+	}
+	/* special cntrl keys */
+	switch(scancode) {
+	case 0x2A:
+	case 0x36: /* shift pressed */
+		shift=1;
+		return; /* do nothing else */
+	case 0xAA:
+	case 0xB6: /* shift released */
+		shift=0;
+		return; /* do nothing else */
+	case 0x38: /* alt pressed */
+		alt=1;
+		return; /* do nothing else */
+	case 0xB8: /* alt released */
+		alt=0;
+		return; /* do nothing else */
+	case 0x1d: /* ctrl pressed */
+		ctrl=1;
+		return; /* do nothing else */
+	case 0x9d: /* ctrl released */
+		ctrl=0;
+		return; /* do nothing else */
+	case 0x46: /* scrollock pressed */
+		scroll_lock=~scroll_lock;
+		if(scroll_lock==0)
+			leds&=~LED_SCR; /* switch LED off */
+		else
+			leds|=LED_SCR; /* switch on LED */
+		pckbd_leds(leds);
+		return; /* do nothing else */
+	case 0x3A: /* capslock pressed */
+		caps_lock=~caps_lock;
+		if(caps_lock==0)
+			leds&=~LED_CAP; /* switch caps_lock off */
+		else
+			leds|=LED_CAP; /* switch on LED */
+		pckbd_leds(leds);
+		return;
+	case 0x45: /* numlock pressed */
+		num_lock=~num_lock;
+		if(num_lock==0)
+			leds&=~LED_NUM; /* switch LED off */
+		else
+			leds|=LED_NUM;  /* switch on LED */
+		pckbd_leds(leds);
+		return;
+	case 0xC6: /* scroll lock released */
+	case 0xC5: /* num lock released */
+	case 0xBA: /* caps lock released */
+		return; /* just swallow */
+	}
+	if((scancode&0x80)==0x80) /* key released */
+		return;
+	/* now, decide which table we need */
+	if(scancode > (sizeof(kbd_plain_xlate)/sizeof(kbd_plain_xlate[0]))) { /* scancode not in list */
+		PRINTF("unkown scancode %X\n",scancode);
+		return; /* swallow it */
+	}
+	/* setup plain code first */
+	keycode=kbd_plain_xlate[scancode];
+	if(caps_lock==1) { /* caps_lock is pressed, overwrite plain code */
+		if(scancode > (sizeof(kbd_shift_xlate)/sizeof(kbd_shift_xlate[0]))) { /* scancode not in list */
+			PRINTF("unkown caps-locked scancode %X\n",scancode);
+			return; /* swallow it */
+		}
+		keycode=kbd_shift_xlate[scancode];
+		if(keycode<'A') { /* we only want the alphas capital */
+			keycode=kbd_plain_xlate[scancode];
+		}
+	}
+	if(shift==1) { /* shift overwrites caps_lock */
+		if(scancode > (sizeof(kbd_shift_xlate)/sizeof(kbd_shift_xlate[0]))) { /* scancode not in list */
+			PRINTF("unkown shifted scancode %X\n",scancode);
+			return; /* swallow it */
+		}
+		keycode=kbd_shift_xlate[scancode];
+	}
+	if(ctrl==1) { /* ctrl overwrites caps_lock and shift */
+		if(scancode > (sizeof(kbd_ctrl_xlate)/sizeof(kbd_ctrl_xlate[0]))) { /* scancode not in list */
+			PRINTF("unkown ctrl scancode %X\n",scancode);
+			return; /* swallow it */
+		}
+		keycode=kbd_ctrl_xlate[scancode];
+	}
+	/* check if valid keycode */
+	if(keycode==0xff) {
+		PRINTF("unkown scancode %X\n",scancode);
+		return; /* swallow unknown codes */
+	}
+
+	kbd_put_queue(keycode);
+	PRINTF("%x\n",keycode);
+}
+
+/******************************************************************
+ * Init
+ ******************************************************************/
+
+#ifdef CFG_CONSOLE_OVERWRITE_ROUTINE
+extern int overwrite_console (void);
+#else
+int overwrite_console (void)
+{
+	return (0);
+}
+#endif
+
+int kbd_init (void)
+{
+	int error;
+  	device_t kbddev ;
+	char *stdinname  = getenv ("stdin");
+
+	if(kbd_init_hw()==-1)
+		return -1;
+  	memset (&kbddev, 0, sizeof(kbddev));
+  	strcpy(kbddev.name, DEVNAME);
+  	kbddev.flags =  DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM;
+  	kbddev.putc = NULL ;
+	kbddev.puts = NULL ;
+	kbddev.getc = kbd_getc ;
+	kbddev.tstc = kbd_testc ;
+
+ 	error = device_register (&kbddev);
+	if(error==0) {
+		/* check if this is the standard input device */
+		if(strcmp(stdinname,DEVNAME)==0) {
+			/* reassign the console */
+			if(overwrite_console()) {
+				return 1;
+			}
+			error=console_assign(stdin,DEVNAME);
+			if(error==0)
+				return 1;
+			else
+				return error;
+		}
+		return 1;
+	}
+	return error;
+}
+
+#endif /* CONFIG_PS2KBD */
diff --git a/drivers/pc_keyb.c b/drivers/pc_keyb.c
new file mode 100644
index 0000000000..07c7914fae
--- /dev/null
+++ b/drivers/pc_keyb.c
@@ -0,0 +1,256 @@
+/***********************************************************************
+ *
+ * (C) Copyright 2004
+ * DENX Software Engineering
+ * Wolfgang Denk, wd@denx.de
+ * All rights reserved.
+ *
+ * PS/2 keyboard driver
+ *
+ * Originally from linux source (drivers/char/pc_keyb.c)
+ *
+ ***********************************************************************/
+
+#include <common.h>
+
+#ifdef CONFIG_PS2KBD
+
+#include <keyboard.h>
+#include <pc_keyb.h>
+
+#undef KBG_DEBUG
+
+#ifdef KBG_DEBUG
+#define	PRINTF(fmt,args...)	printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+
+/*
+ * This reads the keyboard status port, and does the
+ * appropriate action.
+ *
+ */
+static unsigned char handle_kbd_event(void)
+{
+	unsigned char status = kbd_read_status();
+	unsigned int work = 10000;
+
+	while ((--work > 0) && (status & KBD_STAT_OBF)) {
+		unsigned char scancode;
+
+		scancode = kbd_read_input();
+
+		/* Error bytes must be ignored to make the
+		   Synaptics touchpads compaq use work */
+		/* Ignore error bytes */
+		if (!(status & (KBD_STAT_GTO | KBD_STAT_PERR))) {
+			if (status & KBD_STAT_MOUSE_OBF)
+				; /* not supported: handle_mouse_event(scancode); */
+			else
+				handle_scancode(scancode);
+		}
+		status = kbd_read_status();
+	}
+	if (!work)
+		PRINTF("pc_keyb: controller jammed (0x%02X).\n", status);
+	return status;
+}
+
+
+static int kbd_read_data(void)
+{
+	int val;
+	unsigned char status;
+
+	val=-1;
+	status = kbd_read_status();
+	if (status & KBD_STAT_OBF) {
+		val = kbd_read_input();
+		if (status & (KBD_STAT_GTO | KBD_STAT_PERR))
+			val = -2;
+	}
+	return val;
+}
+
+static int kbd_wait_for_input(void)
+{
+	unsigned long timeout;
+	int val;
+
+	timeout = KBD_TIMEOUT;
+	val=kbd_read_data();
+	while(val < 0) {
+		if(timeout--==0)
+			return -1;
+		udelay(1000);
+		val=kbd_read_data();
+	}
+	return val;
+}
+
+
+static int kb_wait(void)
+{
+	unsigned long timeout = KBC_TIMEOUT * 10;
+
+	do {
+		unsigned char status = handle_kbd_event();
+		if (!(status & KBD_STAT_IBF))
+			return 0; /* ok */
+		udelay(1000);
+		timeout--;
+	} while (timeout);
+	return 1;
+}
+
+static void kbd_write_command_w(int data)
+{
+	if(kb_wait())
+		PRINTF("timeout in kbd_write_command_w\n");
+	kbd_write_command(data);
+}
+
+static void kbd_write_output_w(int data)
+{
+	if(kb_wait())
+		PRINTF("timeout in kbd_write_output_w\n");
+	kbd_write_output(data);
+}
+
+static void kbd_send_data(unsigned char data)
+{
+	kbd_write_output_w(data);
+	kbd_wait_for_input();
+}
+
+
+static char * kbd_initialize(void)
+{
+	int status;
+
+	/*
+	 * Test the keyboard interface.
+	 * This seems to be the only way to get it going.
+	 * If the test is successful a x55 is placed in the input buffer.
+	 */
+	kbd_write_command_w(KBD_CCMD_SELF_TEST);
+	if (kbd_wait_for_input() != 0x55)
+		return "Kbd:   failed self test";
+	/*
+	 * Perform a keyboard interface test.  This causes the controller
+	 * to test the keyboard clock and data lines.  The results of the
+	 * test are placed in the input buffer.
+	 */
+	kbd_write_command_w(KBD_CCMD_KBD_TEST);
+	if (kbd_wait_for_input() != 0x00)
+		return "Kbd:   interface failed self test";
+	/*
+	 * Enable the keyboard by allowing the keyboard clock to run.
+	 */
+	kbd_write_command_w(KBD_CCMD_KBD_ENABLE);
+
+	/*
+	 * Reset keyboard. If the read times out
+	 * then the assumption is that no keyboard is
+	 * plugged into the machine.
+	 * This defaults the keyboard to scan-code set 2.
+	 *
+	 * Set up to try again if the keyboard asks for RESEND.
+	 */
+	do {
+		kbd_write_output_w(KBD_CMD_RESET);
+		status = kbd_wait_for_input();
+		if (status == KBD_REPLY_ACK)
+			break;
+		if (status != KBD_REPLY_RESEND) {
+			PRINTF("status: %X\n",status);
+			return "Kbd:   reset failed, no ACK";
+		}
+	} while (1);
+	if (kbd_wait_for_input() != KBD_REPLY_POR)
+		return "Kbd:   reset failed, no POR";
+
+	/*
+	 * Set keyboard controller mode. During this, the keyboard should be
+	 * in the disabled state.
+	 *
+	 * Set up to try again if the keyboard asks for RESEND.
+	 */
+	do {
+		kbd_write_output_w(KBD_CMD_DISABLE);
+		status = kbd_wait_for_input();
+		if (status == KBD_REPLY_ACK)
+			break;
+		if (status != KBD_REPLY_RESEND)
+			return "Kbd:   disable keyboard: no ACK";
+	} while (1);
+
+	kbd_write_command_w(KBD_CCMD_WRITE_MODE);
+	kbd_write_output_w(KBD_MODE_KBD_INT
+			      | KBD_MODE_SYS
+			      | KBD_MODE_DISABLE_MOUSE
+			      | KBD_MODE_KCC);
+
+	/* ibm powerpc portables need this to use scan-code set 1 -- Cort */
+	kbd_write_command_w(KBD_CCMD_READ_MODE);
+	if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
+		/*
+		 * If the controller does not support conversion,
+		 * Set the keyboard to scan-code set 1.
+		 */
+		kbd_write_output_w(0xF0);
+		kbd_wait_for_input();
+		kbd_write_output_w(0x01);
+		kbd_wait_for_input();
+	}
+	kbd_write_output_w(KBD_CMD_ENABLE);
+	if (kbd_wait_for_input() != KBD_REPLY_ACK)
+		return "Kbd:   enable keyboard: no ACK";
+
+	/*
+	 * Finally, set the typematic rate to maximum.
+	 */
+	kbd_write_output_w(KBD_CMD_SET_RATE);
+	if (kbd_wait_for_input() != KBD_REPLY_ACK)
+		return "Kbd:   Set rate: no ACK";
+	kbd_write_output_w(0x00);
+	if (kbd_wait_for_input() != KBD_REPLY_ACK)
+		return "Kbd:   Set rate: no ACK";
+	return NULL;
+}
+
+static void kbd_interrupt(void *dev_id)
+{
+	handle_kbd_event();
+}
+
+/******************************************************************
+ * Init
+ ******************************************************************/
+
+int kbd_init_hw(void)
+{
+	char* result;
+
+	kbd_request_region();
+
+	result=kbd_initialize();
+	if (result==NULL) {
+		PRINTF("AT Keyboard initialized\n");
+		kbd_request_irq(kbd_interrupt);
+		return (1);
+	} else {
+		printf("%s\n",result);
+		return (-1);
+	}
+}
+
+void pckbd_leds(unsigned char leds)
+{
+	kbd_send_data(KBD_CMD_SET_LEDS);
+	kbd_send_data(leds);
+}
+
+#endif /* CONFIG_PS2KBD */
diff --git a/drivers/ps2mult.c b/drivers/ps2mult.c
new file mode 100644
index 0000000000..c0457b8c49
--- /dev/null
+++ b/drivers/ps2mult.c
@@ -0,0 +1,456 @@
+/***********************************************************************
+ *
+ * (C) Copyright 2004
+ * DENX Software Engineering
+ * Wolfgang Denk, wd@denx.de
+ * All rights reserved.
+ *
+ * PS/2 multiplexer driver
+ *
+ * Originally from linux source (drivers/char/ps2mult.c)
+ *
+ * Uses simple serial driver (ps2ser.c) to access the multiplexer
+ * Used by PS/2 keyboard driver (pc_keyb.c)
+ *
+ ***********************************************************************/
+
+#include <common.h>
+
+#ifdef CONFIG_PS2MULT
+
+#include <pc_keyb.h>
+#include <asm/atomic.h>
+#include <ps2mult.h>
+
+/* #define DEBUG_MULT */
+/* #define DEBUG_KEYB */
+
+#define KBD_STAT_DEFAULT		(KBD_STAT_SELFTEST | KBD_STAT_UNLOCKED)
+
+#define PRINTF(format, args...)		printf("ps2mult.c: " format, ## args)
+
+#ifdef DEBUG_MULT
+#define PRINTF_MULT(format, args...)	printf("PS2MULT: " format, ## args)
+#else
+#define PRINTF_MULT(format, args...)
+#endif
+
+#ifdef DEBUG_KEYB
+#define PRINTF_KEYB(format, args...)	printf("KEYB: " format, ## args)
+#else
+#define PRINTF_KEYB(format, args...)
+#endif
+
+
+static int init_done = 0;
+
+static int received_escape = 0;
+static int received_bsync = 0;
+static int received_selector = 0;
+
+static int kbd_command_active = 0;
+static int mouse_command_active = 0;
+static int ctl_command_active = 0;
+
+static u_char command_byte = 0;
+
+static void (*keyb_handler)(void *dev_id);
+
+static u_char ps2mult_buf [PS2BUF_SIZE];
+static atomic_t ps2mult_buf_cnt;
+static int ps2mult_buf_in_idx;
+static int ps2mult_buf_out_idx;
+
+static u_char ps2mult_buf_status [PS2BUF_SIZE];
+
+
+static void ps2mult_send_byte(u_char byte, u_char sel)
+{
+	ps2ser_putc(sel);
+
+	if (sel == PS2MULT_KB_SELECTOR) {
+		PRINTF_MULT("0x%02x send KEYBOARD\n", byte);
+		kbd_command_active = 1;
+	} else {
+		PRINTF_MULT("0x%02x send MOUSE\n", byte);
+		mouse_command_active = 1;
+	}
+
+	switch (byte) {
+	case PS2MULT_ESCAPE:
+	case PS2MULT_BSYNC:
+	case PS2MULT_KB_SELECTOR:
+	case PS2MULT_MS_SELECTOR:
+	case PS2MULT_SESSION_START:
+	case PS2MULT_SESSION_END:
+		ps2ser_putc(PS2MULT_ESCAPE);
+		break;
+	default:
+		break;
+	}
+
+	ps2ser_putc(byte);
+}
+
+static void ps2mult_receive_byte(u_char byte, u_char sel)
+{
+	u_char status = KBD_STAT_DEFAULT;
+
+#if 1 /* Ignore mouse in U-Boot */
+	if (sel == PS2MULT_MS_SELECTOR) return;
+#endif
+
+	if (sel == PS2MULT_KB_SELECTOR) {
+		if (kbd_command_active) {
+			if (!received_bsync) {
+				PRINTF_MULT("0x%02x lost KEYBOARD !!!\n", byte);
+				return;
+			} else {
+				kbd_command_active = 0;
+				received_bsync = 0;
+			}
+		}
+		PRINTF_MULT("0x%02x receive KEYBOARD\n", byte);
+		status |= KBD_STAT_IBF | KBD_STAT_OBF;
+	} else {
+		if (mouse_command_active) {
+			if (!received_bsync) {
+				PRINTF_MULT("0x%02x lost MOUSE !!!\n", byte);
+				return;
+			} else {
+				mouse_command_active = 0;
+				received_bsync = 0;
+			}
+		}
+		PRINTF_MULT("0x%02x receive MOUSE\n", byte);
+		status |= KBD_STAT_IBF | KBD_STAT_OBF | KBD_STAT_MOUSE_OBF;
+	}
+
+	if (atomic_read(&ps2mult_buf_cnt) < PS2BUF_SIZE) {
+		ps2mult_buf_status[ps2mult_buf_in_idx] = status;
+		ps2mult_buf[ps2mult_buf_in_idx++] = byte;
+		ps2mult_buf_in_idx &= (PS2BUF_SIZE - 1);
+		atomic_inc(&ps2mult_buf_cnt);
+	} else {
+		PRINTF("buffer overflow\n");
+	}
+
+	if (received_bsync) {
+		PRINTF("unexpected BSYNC\n");
+		received_bsync = 0;
+	}
+}
+
+void ps2mult_callback (int in_cnt)
+{
+	int i;
+	u_char byte;
+	static int keyb_handler_active = 0;
+
+	if (!init_done) {
+		return;
+	}
+
+	for (i = 0; i < in_cnt; i ++) {
+		byte = ps2ser_getc();
+
+		if (received_escape) {
+			ps2mult_receive_byte(byte, received_selector);
+			received_escape = 0;
+		} else switch (byte) {
+		case PS2MULT_ESCAPE:
+			PRINTF_MULT("ESCAPE receive\n");
+			received_escape = 1;
+			break;
+
+		case PS2MULT_BSYNC:
+			PRINTF_MULT("BSYNC receive\n");
+			received_bsync = 1;
+			break;
+
+		case PS2MULT_KB_SELECTOR:
+		case PS2MULT_MS_SELECTOR:
+			PRINTF_MULT("%s receive\n",
+			    byte == PS2MULT_KB_SELECTOR ? "KB_SEL" : "MS_SEL");
+			received_selector = byte;
+			break;
+
+		case PS2MULT_SESSION_START:
+		case PS2MULT_SESSION_END:
+			PRINTF_MULT("%s receive\n",
+			    byte == PS2MULT_SESSION_START ?
+			    "SESSION_START" : "SESSION_END");
+			break;
+
+		default:
+			ps2mult_receive_byte(byte, received_selector);
+		}
+	}
+
+	if (keyb_handler && !keyb_handler_active &&
+	    atomic_read(&ps2mult_buf_cnt)) {
+		keyb_handler_active = 1;
+		keyb_handler(NULL);
+		keyb_handler_active = 0;
+	}
+}
+
+u_char ps2mult_read_status(void)
+{
+	u_char byte;
+
+	if (atomic_read(&ps2mult_buf_cnt) == 0) {
+		ps2ser_check();
+	}
+
+	if (atomic_read(&ps2mult_buf_cnt)) {
+		byte = ps2mult_buf_status[ps2mult_buf_out_idx];
+	} else {
+		byte = KBD_STAT_DEFAULT;
+	}
+	PRINTF_KEYB("read_status()=0x%02x\n", byte);
+	return byte;
+}
+
+u_char ps2mult_read_input(void)
+{
+	u_char byte = 0;
+
+	if (atomic_read(&ps2mult_buf_cnt) == 0) {
+		ps2ser_check();
+	}
+
+	if (atomic_read(&ps2mult_buf_cnt)) {
+		byte = ps2mult_buf[ps2mult_buf_out_idx++];
+		ps2mult_buf_out_idx &= (PS2BUF_SIZE - 1);
+		atomic_dec(&ps2mult_buf_cnt);
+	}
+	PRINTF_KEYB("read_input()=0x%02x\n", byte);
+	return byte;
+}
+
+void ps2mult_write_output(u_char val)
+{
+	int i;
+
+	PRINTF_KEYB("write_output(0x%02x)\n", val);
+
+	for (i = 0; i < KBD_TIMEOUT; i++) {
+		if (!kbd_command_active && !mouse_command_active) {
+			break;
+		}
+		udelay(1000);
+		ps2ser_check();
+	}
+
+	if (kbd_command_active) {
+		PRINTF("keyboard command not acknoledged\n");
+		kbd_command_active = 0;
+	}
+
+	if (mouse_command_active) {
+		PRINTF("mouse command not acknoledged\n");
+		mouse_command_active = 0;
+	}
+
+	if (ctl_command_active) {
+		switch (ctl_command_active) {
+		case KBD_CCMD_WRITE_MODE:
+			  /* Scan code conversion not supported */
+			command_byte = val & ~KBD_MODE_KCC;
+			break;
+
+		case KBD_CCMD_WRITE_AUX_OBUF:
+			ps2mult_receive_byte(val, PS2MULT_MS_SELECTOR);
+			break;
+
+		case KBD_CCMD_WRITE_MOUSE:
+			ps2mult_send_byte(val, PS2MULT_MS_SELECTOR);
+			break;
+
+		default:
+			PRINTF("invalid controller command\n");
+			break;
+		}
+
+		ctl_command_active = 0;
+		return;
+	}
+
+	ps2mult_send_byte(val, PS2MULT_KB_SELECTOR);
+}
+
+void ps2mult_write_command(u_char val)
+{
+	ctl_command_active = 0;
+
+	PRINTF_KEYB("write_command(0x%02x)\n", val);
+
+	switch (val) {
+	case KBD_CCMD_READ_MODE:
+		ps2mult_receive_byte(command_byte, PS2MULT_KB_SELECTOR);
+		break;
+
+	case KBD_CCMD_WRITE_MODE:
+		ctl_command_active = val;
+		break;
+
+	case KBD_CCMD_MOUSE_DISABLE:
+		break;
+
+	case KBD_CCMD_MOUSE_ENABLE:
+		break;
+
+	case KBD_CCMD_SELF_TEST:
+		ps2mult_receive_byte(0x55, PS2MULT_KB_SELECTOR);
+		break;
+
+	case KBD_CCMD_KBD_TEST:
+		ps2mult_receive_byte(0x00, PS2MULT_KB_SELECTOR);
+		break;
+
+	case KBD_CCMD_KBD_DISABLE:
+		break;
+
+	case KBD_CCMD_KBD_ENABLE:
+		break;
+
+	case KBD_CCMD_WRITE_AUX_OBUF:
+		ctl_command_active = val;
+		break;
+
+	case KBD_CCMD_WRITE_MOUSE:
+		ctl_command_active = val;
+		break;
+
+	default:
+		PRINTF("invalid controller command\n");
+		break;
+	}
+}
+
+static int ps2mult_getc_w (void)
+{
+	int res = -1;
+	int i;
+
+	for (i = 0; i < KBD_TIMEOUT; i++) {
+		if (ps2ser_check()) {
+			res = ps2ser_getc();
+			break;
+		}
+		udelay(1000);
+	}
+
+	switch (res) {
+	case PS2MULT_KB_SELECTOR:
+	case PS2MULT_MS_SELECTOR:
+		received_selector = res;
+		break;
+	default:
+		break;
+	}
+
+	return res;
+}
+
+int ps2mult_init (void)
+{
+	int byte;
+	int kbd_found = 0;
+	int mouse_found = 0;
+
+	ps2ser_init();
+
+	ps2ser_putc(PS2MULT_SESSION_START);
+
+	ps2ser_putc(PS2MULT_KB_SELECTOR);
+	ps2ser_putc(KBD_CMD_RESET);
+
+	do {
+		byte = ps2mult_getc_w();
+	} while (byte >= 0 && byte != KBD_REPLY_ACK);
+
+	if (byte == KBD_REPLY_ACK) {
+		byte = ps2mult_getc_w();
+		if (byte == 0xaa) {
+			kbd_found = 1;
+			puts("keyboard");
+		}
+	}
+
+	if (!kbd_found) {
+		while (byte >= 0) {
+			byte = ps2mult_getc_w();
+		}
+	}
+
+#if 1 /* detect mouse */
+	ps2ser_putc(PS2MULT_MS_SELECTOR);
+	ps2ser_putc(AUX_RESET);
+
+	do {
+		byte = ps2mult_getc_w();
+	} while (byte >= 0 && byte != AUX_ACK);
+
+	if (byte == AUX_ACK) {
+		byte = ps2mult_getc_w();
+		if (byte == 0xaa) {
+			byte = ps2mult_getc_w();
+			if (byte == 0x00) {
+				mouse_found = 1;
+				puts(", mouse");
+			}
+		}
+	}
+
+	if (!mouse_found) {
+		while (byte >= 0) {
+			byte = ps2mult_getc_w();
+		}
+	}
+#endif
+
+	if (mouse_found || kbd_found) {
+		if (!received_selector) {
+			if (mouse_found) {
+				received_selector = PS2MULT_MS_SELECTOR;
+			} else {
+				received_selector = PS2MULT_KB_SELECTOR;
+			}
+		}
+
+		init_done = 1;
+	} else {
+		puts("No device found");
+	}
+
+	puts("\n");
+
+#if 0 /* for testing */
+	{
+		int i;
+		u_char key[] = {
+			0x1f, 0x12, 0x14, 0x12, 0x31, 0x2f, 0x39,	/* setenv */
+			0x1f, 0x14, 0x20, 0x17, 0x31, 0x39,		/* stdin */
+			0x1f, 0x12, 0x13, 0x17, 0x1e, 0x26, 0x1c,	/* serial */
+		};
+
+		for (i = 0; i < sizeof (key); i++) {
+			ps2mult_receive_byte (key[i],	     PS2MULT_KB_SELECTOR);
+			ps2mult_receive_byte (key[i] | 0x80, PS2MULT_KB_SELECTOR);
+		}
+	}
+#endif
+
+	return init_done ? 0 : -1;
+}
+
+int ps2mult_request_irq(void (*handler)(void *))
+{
+	keyb_handler = handler;
+
+	return 0;
+}
+
+#endif /* CONFIG_PS2MULT */
diff --git a/drivers/ps2ser.c b/drivers/ps2ser.c
new file mode 100644
index 0000000000..71658d7ca0
--- /dev/null
+++ b/drivers/ps2ser.c
@@ -0,0 +1,166 @@
+/***********************************************************************
+ *
+ * (C) Copyright 2004
+ * DENX Software Engineering
+ * Wolfgang Denk, wd@denx.de
+ * All rights reserved.
+ *
+ * Simple 16550A serial driver
+ *
+ * Originally from linux source (drivers/char/ps2ser.c)
+ *
+ * Used by the PS/2 multiplexer driver (ps2mult.c)
+ *
+ ***********************************************************************/
+
+#include <common.h>
+
+#ifdef CONFIG_PS2SERIAL
+
+#include <asm/io.h>
+#include <asm/atomic.h>
+#include <ps2mult.h>
+
+/* #define	DEBUG */
+
+#define PS2SER_BAUD	57600
+
+static int	ps2ser_getc_hw(void);
+static void	ps2ser_interrupt(void *dev_id);
+
+extern struct	serial_state rs_table[]; /* in serial.c */
+static struct	serial_state *state = rs_table + CONFIG_PS2SERIAL;
+
+static u_char	ps2buf[PS2BUF_SIZE];
+static atomic_t	ps2buf_cnt;
+static int	ps2buf_in_idx;
+static int	ps2buf_out_idx;
+
+
+static inline unsigned int ps2ser_in(int offset)
+{
+	return readb((unsigned long) state->iomem_base + offset);
+}
+
+static inline void ps2ser_out(int offset, int value)
+{
+	writeb(value, (unsigned long) state->iomem_base + offset);
+}
+
+int ps2ser_init(void)
+{
+	int quot = state->baud_base / PS2SER_BAUD;
+	unsigned cval = 0x3; /* 8N1 - 8 data bits, no parity bits, 1 stop bit */
+
+	  /* Set speed, enable interrupts, enable FIFO
+	   */
+	ps2ser_out(UART_LCR, cval | UART_LCR_DLAB);
+	ps2ser_out(UART_DLL, quot & 0xff);
+	ps2ser_out(UART_DLM, quot >> 8);
+	ps2ser_out(UART_LCR, cval);
+	ps2ser_out(UART_IER, UART_IER_RDI);
+	ps2ser_out(UART_MCR, UART_MCR_OUT2 | UART_MCR_DTR | UART_MCR_RTS);
+	ps2ser_out(UART_FCR,
+	    UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+
+	/* If we read 0xff from the LSR, there is no UART here
+	 */
+	if (ps2ser_in(UART_LSR) == 0xff) {
+		printf ("ps2ser.c: no UART found\n");
+		return -1;
+	}
+
+	irq_install_handler(state->irq, ps2ser_interrupt, NULL);
+
+	return 0;
+}
+
+void ps2ser_putc(int chr)
+{
+#ifdef DEBUG
+	printf(">>>> 0x%02x\n", chr);
+#endif
+
+	while (!(ps2ser_in(UART_LSR) & UART_LSR_THRE));
+
+	ps2ser_out(UART_TX, chr);
+}
+
+static int ps2ser_getc_hw(void)
+{
+	int res = -1;
+
+	if (ps2ser_in(UART_LSR) & UART_LSR_DR) {
+		res = (ps2ser_in(UART_RX));
+	}
+
+	return res;
+}
+
+int ps2ser_getc(void)
+{
+	volatile int chr;
+	int flags;
+
+#ifdef DEBUG
+	printf("<< ");
+#endif
+
+	flags = disable_interrupts();
+
+	do {
+		if (atomic_read(&ps2buf_cnt) != 0) {
+			chr = ps2buf[ps2buf_out_idx++];
+			ps2buf_out_idx &= (PS2BUF_SIZE - 1);
+			atomic_dec(&ps2buf_cnt);
+		} else {
+			chr = ps2ser_getc_hw();
+		}
+	}
+	while (chr < 0);
+
+	if (flags) enable_interrupts();
+
+#ifdef DEBUG
+	printf("0x%02x\n", chr);
+#endif
+
+	return chr;
+}
+
+int ps2ser_check(void)
+{
+	int flags;
+
+	flags = disable_interrupts();
+	ps2ser_interrupt(NULL);
+	if (flags) enable_interrupts();
+
+	return atomic_read(&ps2buf_cnt);
+}
+
+static void ps2ser_interrupt(void *dev_id)
+{
+	int chr;
+	int iir;
+
+	do {
+		chr = ps2ser_getc_hw();
+		iir = ps2ser_in(UART_IIR);
+		if (chr < 0) continue;
+
+		if (atomic_read(&ps2buf_cnt) < PS2BUF_SIZE) {
+			ps2buf[ps2buf_in_idx++] = chr;
+			ps2buf_in_idx &= (PS2BUF_SIZE - 1);
+			atomic_inc(&ps2buf_cnt);
+		} else {
+			printf ("ps2ser.c: buffer overflow\n");
+		}
+	} while (iir & UART_IIR_RDI);
+
+	if (atomic_read(&ps2buf_cnt)) {
+		ps2mult_callback(atomic_read(&ps2buf_cnt));
+	}
+}
+
+#endif /* CONFIG_PS2SERIAL */