summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-12-12 22:06:17 +0000
committerwdenk <wdenk>2004-12-12 22:06:17 +0000
commit7e6bf358d84b413b7a402079b130a9a2a1222d74 (patch)
treee721df75fe9c3d22042f628bfc98d878884fd3b8 /drivers
parent25d6712a81b31fc5e4c4bddd81e9aaddb84e23be (diff)
Patch by Martin Krause, 27 Oct 2004:
- add support for "STK52xx" board (including PS/2 multiplexer) - add hardware detection for TQM5200
Diffstat (limited to 'drivers')
-rw-r--r--drivers/keyboard.c15
-rw-r--r--drivers/ps2ser.c107
2 files changed, 118 insertions, 4 deletions
diff --git a/drivers/keyboard.c b/drivers/keyboard.c
index a42468f0c6a..f12de838f36 100644
--- a/drivers/keyboard.c
+++ b/drivers/keyboard.c
@@ -33,6 +33,10 @@
#define KBD_BUFFER_LEN 0x20 /* size of the keyboardbuffer */
+#ifdef CONFIG_MPC5xxx
+int ps2ser_check(void);
+#endif
+
static volatile char kbd_buffer[KBD_BUFFER_LEN];
static volatile int in_pointer = 0;
static volatile int out_pointer = 0;
@@ -71,6 +75,10 @@ static void kbd_put_queue(char data)
/* test if a character is in the queue */
static int kbd_testc(void)
{
+#ifdef CONFIG_MPC5xxx
+ /* no ISR is used, so received chars must be polled */
+ ps2ser_check();
+#endif
if(in_pointer==out_pointer)
return(0); /* no data */
else
@@ -81,7 +89,12 @@ static int kbd_testc(void)
static int kbd_getc(void)
{
char c;
- while(in_pointer==out_pointer);
+ while(in_pointer==out_pointer) {
+#ifdef CONFIG_MPC5xxx
+ /* no ISR is used, so received chars must be polled */
+ ps2ser_check();
+#endif
+ ;}
if((out_pointer+1)==KBD_BUFFER_LEN)
out_pointer=0;
else
diff --git a/drivers/ps2ser.c b/drivers/ps2ser.c
index 52f1db9ad9d..56925a8e03c 100644
--- a/drivers/ps2ser.c
+++ b/drivers/ps2ser.c
@@ -25,17 +25,88 @@
#define PS2SER_BAUD 57600
+#ifdef CONFIG_MPC5xxx
+#if CONFIG_PS2SERIAL == 1
+#define PSC_BASE MPC5XXX_PSC1
+#elif CONFIG_PS2SERIAL == 2
+#define PSC_BASE MPC5XXX_PSC2
+#elif CONFIG_PS2SERIAL == 3
+#define PSC_BASE MPC5XXX_PSC3
+#elif defined(CONFIG_MGT5100)
+#error CONFIG_PS2SERIAL must be in 1, 2 or 3
+#elif CONFIG_PS2SERIAL == 4
+#define PSC_BASE MPC5XXX_PSC4
+#elif CONFIG_PS2SERIAL == 5
+#define PSC_BASE MPC5XXX_PSC5
+#elif CONFIG_PS2SERIAL == 6
+#define PSC_BASE MPC5XXX_PSC6
+#else
+#error CONFIG_PS2SERIAL must be in 1 ... 6
+#endif
+#endif /* CONFIG_MPC5xxx */
+
static int ps2ser_getc_hw(void);
static void ps2ser_interrupt(void *dev_id);
extern struct serial_state rs_table[]; /* in serial.c */
+#ifndef CONFIG_MPC5xxx
static struct serial_state *state;
+#endif
static u_char ps2buf[PS2BUF_SIZE];
static atomic_t ps2buf_cnt;
static int ps2buf_in_idx;
static int ps2buf_out_idx;
+#ifdef CONFIG_MPC5xxx
+int ps2ser_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+ unsigned long baseclk;
+ int div;
+
+ /* reset PSC */
+ psc->command = PSC_SEL_MODE_REG_1;
+
+ /* select clock sources */
+#if defined(CONFIG_MGT5100)
+ psc->psc_clock_select = 0xdd00;
+ baseclk = (CFG_MPC5XXX_CLKIN + 16) / 32;
+#elif defined(CONFIG_MPC5200)
+ psc->psc_clock_select = 0;
+ baseclk = (gd->ipb_clk + 16) / 32;
+#endif
+
+ /* switch to UART mode */
+ psc->sicr = 0;
+
+ /* configure parity, bit length and so on */
+#if defined(CONFIG_MGT5100)
+ psc->mode = PSC_MODE_ERR | PSC_MODE_8_BITS | PSC_MODE_PARNONE;
+#elif defined(CONFIG_MPC5200)
+ psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE;
+#endif
+ psc->mode = PSC_MODE_ONE_STOP;
+
+ /* set up UART divisor */
+ div = (baseclk + (PS2SER_BAUD/2)) / PS2SER_BAUD;
+ psc->ctur = (div >> 8) & 0xff;
+ psc->ctlr = div & 0xff;
+
+ /* disable all interrupts */
+ psc->psc_imr = 0;
+
+ /* reset and enable Rx/Tx */
+ psc->command = PSC_RST_RX;
+ psc->command = PSC_RST_TX;
+ psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE;
+
+ return (0);
+}
+
+#else /* !CONFIG_MPC5xxx */
static inline unsigned int ps2ser_in(int offset)
{
@@ -79,25 +150,44 @@ int ps2ser_init(void)
return 0;
}
+#endif /* CONFIG_MPC5xxx */
void ps2ser_putc(int chr)
{
+#ifdef CONFIG_MPC5xxx
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
#ifdef DEBUG
printf(">>>> 0x%02x\n", chr);
#endif
+#ifdef CONFIG_MPC5xxx
+ while (!(psc->psc_status & PSC_SR_TXRDY));
+
+ psc->psc_buffer_8 = chr;
+#else
while (!(ps2ser_in(UART_LSR) & UART_LSR_THRE));
ps2ser_out(UART_TX, chr);
+#endif
}
static int ps2ser_getc_hw(void)
{
+#ifdef CONFIG_MPC5xxx
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
int res = -1;
+#ifdef CONFIG_MPC5xxx
+ if (psc->psc_status & PSC_SR_RXRDY) {
+ res = (psc->psc_buffer_8);
+ }
+#else
if (ps2ser_in(UART_LSR) & UART_LSR_DR) {
res = (ps2ser_in(UART_RX));
}
+#endif
return res;
}
@@ -146,12 +236,19 @@ int ps2ser_check(void)
static void ps2ser_interrupt(void *dev_id)
{
+#ifdef CONFIG_MPC5xxx
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
int chr;
- int iir;
+ int status;
do {
chr = ps2ser_getc_hw();
- iir = ps2ser_in(UART_IIR);
+#ifdef CONFIG_MPC5xxx
+ status = psc->psc_status;
+#else
+ status = ps2ser_in(UART_IIR);
+#endif
if (chr < 0) continue;
if (atomic_read(&ps2buf_cnt) < PS2BUF_SIZE) {
@@ -161,7 +258,11 @@ static void ps2ser_interrupt(void *dev_id)
} else {
printf ("ps2ser.c: buffer overflow\n");
}
- } while (iir & UART_IIR_RDI);
+#ifdef CONFIG_MPC5xxx
+ } while (status & PSC_SR_RXRDY);
+#else
+ } while (status & UART_IIR_RDI);
+#endif
if (atomic_read(&ps2buf_cnt)) {
ps2mult_callback(atomic_read(&ps2buf_cnt));