diff options
| author | Andre Przywara <andre.przywara@arm.com> | 2017-02-16 01:20:27 +0000 |
|---|---|---|
| committer | Jagan Teki <jagan@amarulasolutions.com> | 2017-04-05 15:03:17 +0530 |
| commit | 7b82a229e56d4f1f7f200e4e712c73be2ef9aea5 (patch) | |
| tree | cde7144752384267f5a69313c1b34d8322d5e286 /drivers | |
| parent | 170817a4978e99c8a856800551fe3ad3fdb58775 (diff) | |
sunxi: prepare for sharing MACH_SUN8I_H3 config symbol
The Allwinner H5 is very close to the H3 SoC, but has ARMv8 cores.
To allow sharing the clocks, GPIO and driver code easily, create an
architecture agnostic MACH_SUNXI_H3_H5 Kconfig symbol.
Rename the existing symbol to MACH_SUNXI_H3_H5 where code is shared and
let it be selected by a new shared Kconfig option.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mtd/spi/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/sun8i_emac.c | 2 | ||||
| -rw-r--r-- | drivers/power/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-sunxi.c | 2 |
4 files changed, 5 insertions, 5 deletions
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 1f23c8e34e..5ca0a712d8 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -132,7 +132,7 @@ if SPL config SPL_SPI_SUNXI bool "Support for SPI Flash on Allwinner SoCs in SPL" - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_H3 || MACH_SUN50I + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNXI_H3_H5 || MACH_SUN50I ---help--- Enable support for SPI Flash. This option allows SPL to read from sunxi SPI Flash. It uses the same method as the boot ROM, so does diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index b87210bad7..abdfada646 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -62,7 +62,7 @@ #define AHB_GATE_OFFSET_EPHY 0 -#if defined(CONFIG_MACH_SUN8I_H3) +#if defined(CONFIG_MACH_SUNXI_H3_H5) #define SUN8I_GPD8_GMAC 2 #else #define SUN8I_GPD8_GMAC 4 diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index f2c5629be2..64e5bc2f74 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -12,7 +12,7 @@ choice default AXP209_POWER if MACH_SUN4I || MACH_SUN5I || MACH_SUN7I default AXP221_POWER if MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 default AXP818_POWER if MACH_SUN8I_A83T - default SUNXI_NO_PMIC if MACH_SUN8I_H3 || MACH_SUN50I + default SUNXI_NO_PMIC if MACH_SUNXI_H3_H5 || MACH_SUN50I config SUNXI_NO_PMIC bool "board without a pmic" @@ -60,7 +60,7 @@ config AXP818_POWER config SY8106A_POWER bool "SY8106A pmic support" - depends on MACH_SUN8I_H3 + depends on MACH_SUNXI_H3_H5 ---help--- Select this to enable support for the SY8106A pmic found on some H3 boards. diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c index 5bb97ff45b..068f24f483 100644 --- a/drivers/usb/host/ehci-sunxi.c +++ b/drivers/usb/host/ehci-sunxi.c @@ -45,7 +45,7 @@ static int ehci_usb_probe(struct udevice *dev) * clocks resp. phys. */ priv->ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_EHCI0; -#if defined(CONFIG_MACH_SUN8I_H3) || defined(CONFIG_MACH_SUN50I) +#if defined(CONFIG_MACH_SUNXI_H3_H5) || defined(CONFIG_MACH_SUN50I) extra_ahb_gate_mask = 1 << AHB_GATE_OFFSET_USB_OHCI0; #endif priv->phy_index = ((uintptr_t)hccr - SUNXI_USB1_BASE) / BASE_DIST; |