diff options
| author | Stefan Roese <sr@denx.de> | 2015-12-21 13:56:33 +0100 |
|---|---|---|
| committer | Stefan Roese <sr@denx.de> | 2016-01-14 14:08:59 +0100 |
| commit | 81e33f4b65171a7dcb99a3efd9b3a45da129a21a (patch) | |
| tree | 54ea0fb992bb43c740667556e7dbf5cd1d40373d /drivers | |
| parent | b322c83aa47f2fcf1af73a4f686ce4478fca19e3 (diff) | |
arm: mvebu: Move SoC selection (A38X vs AXP) into Kconfig
Until now, the SoC selection for the ARCH_MVEBU platforms has been done
in the config header. Using CONFIG_ARMADA_XP in a non-clear way. As
it needed to get selected for AXP and A38x based boards. This patch
now changes this to move the SoC selection to Kconfig. And also
uses CONFIG_ARCH_MVEBU as a common define for both AXP and A38x.
This makes things a bit clearer - especially for new board additions.
Additionally the defines CONFIG_SYS_MVEBU_DDR_AXP and
CONFIG_SYS_MVEBU_DDR_A38X are replaced with the already available
CONFIG_ARMADA_38X and CONFIG_ARMADA_XP.
And CONFIG_DDR3 is removed, as its not referenced anywhere.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/Makefile | 4 | ||||
| -rw-r--r-- | drivers/block/mvsata_ide.c | 6 | ||||
| -rw-r--r-- | drivers/i2c/mvtwsi.c | 2 |
3 files changed, 6 insertions, 6 deletions
diff --git a/drivers/Makefile b/drivers/Makefile index c9031f2ce8..00da40b704 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -14,8 +14,8 @@ obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/ obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/ obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/ obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/ -obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ddr/marvell/a38x/ -obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ddr/marvell/axp/ +obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/ +obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/ obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/ obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/ obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/ diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c index 52c16025f8..2c6d42410c 100644 --- a/drivers/block/mvsata_ide.c +++ b/drivers/block/mvsata_ide.c @@ -13,7 +13,7 @@ #include <asm/arch/orion5x.h> #elif defined(CONFIG_KIRKWOOD) #include <asm/arch/soc.h> -#elif defined(CONFIG_ARMADA_XP) +#elif defined(CONFIG_ARCH_MVEBU) #include <linux/mbus.h> #endif @@ -102,7 +102,7 @@ struct mvsata_port_registers { * Initialize SATA memory windows for Armada XP */ -#ifdef CONFIG_ARMADA_XP +#ifdef CONFIG_ARCH_MVEBU static void mvsata_ide_conf_mbus_windows(void) { const struct mbus_dram_target_info *dram; @@ -174,7 +174,7 @@ int ide_preinit(void) int ret = MVSATA_STATUS_TIMEOUT; int status; -#ifdef CONFIG_ARMADA_XP +#ifdef CONFIG_ARCH_MVEBU mvsata_ide_conf_mbus_windows(); #endif diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index f20d1b2291..5dc4fbba1f 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -20,7 +20,7 @@ #if defined(CONFIG_ORION5X) #include <asm/arch/orion5x.h> -#elif (defined(CONFIG_KIRKWOOD) || defined(CONFIG_ARMADA_XP)) +#elif (defined(CONFIG_KIRKWOOD) || defined(CONFIG_ARCH_MVEBU)) #include <asm/arch/soc.h> #elif defined(CONFIG_SUNXI) #include <asm/arch/i2c.h> |