summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorwdenk <wdenk>2004-03-02 14:05:39 +0000
committerwdenk <wdenk>2004-03-02 14:05:39 +0000
commitf8d813e34f03823ddfeb3b9f44a9807d3ffb847e (patch)
tree8aa8c3521520f576591d184c858d6ed3eb7a180e /drivers
parente7c85689bbf2f6aaeb68d5976da642ae80fa06b2 (diff)
* Fix SDRAM timings for LITE5200 / IceCube board
* Handle Auti-MDIX / connection status for INCA-IP * Fix USB problems when attempting to read 0 bytes
Diffstat (limited to 'drivers')
-rw-r--r--drivers/inca-ip_sw.c164
1 files changed, 131 insertions, 33 deletions
diff --git a/drivers/inca-ip_sw.c b/drivers/inca-ip_sw.c
index 88bc813213c..3b6397da505 100644
--- a/drivers/inca-ip_sw.c
+++ b/drivers/inca-ip_sw.c
@@ -1,7 +1,7 @@
/*
* INCA-IP internal switch ethernet driver.
*
- * (C) Copyright 2003
+ * (C) Copyright 2003-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -67,6 +67,11 @@
#define INCA_DMA_RX_SOP 0x40000000
#define INCA_DMA_RX_EOP 0x20000000
+#define INCA_SWITCH_PHY_SPEED_10H 0x1
+#define INCA_SWITCH_PHY_SPEED_10F 0x5
+#define INCA_SWITCH_PHY_SPEED_100H 0x2
+#define INCA_SWITCH_PHY_SPEED_100F 0x6
+
/************************ Auto MDIX settings ************************/
#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR INCA_IP_Ports_P1_DIR
#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL INCA_IP_Ports_P1_ALTSEL
@@ -221,8 +226,7 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis)
/* Initialize the descriptor rings.
*/
- for (i = 0; i < NUM_RX_DESC; i++)
- {
+ for (i = 0; i < NUM_RX_DESC; i++) {
inca_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_ring[i]);
memset(rx_desc, 0, sizeof(rx_ring[i]));
@@ -330,8 +334,7 @@ static int inca_switch_init(struct eth_device *dev, bd_t * bis)
}
-static int inca_switch_send(struct eth_device *dev, volatile void *packet,
- int length)
+static int inca_switch_send(struct eth_device *dev, volatile void *packet, int length)
{
int i;
int res = -1;
@@ -628,7 +631,12 @@ static void inca_dma_init(void)
#if defined(CONFIG_INCA_IP_SWITCH_AMDIX)
static int inca_amdix(void)
{
- u32 regValue = 0;
+ u32 phyReg1 = 0;
+ u32 phyReg4 = 0;
+ u32 phyReg5 = 0;
+ u32 phyReg6 = 0;
+ u32 phyReg31 = 0;
+ u32 regEphy = 0;
int mdi_flag;
int retries;
@@ -637,31 +645,29 @@ static int inca_amdix(void)
*INCA_IP_AUTO_MDIX_LAN_PORTS_DIR |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
*INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
+#if 0
/* Wait for signal.
*/
retries = WAIT_SIGNAL_RETRIES;
- while (--retries)
- {
+ while (--retries) {
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
(17 << 16)); /* PHY_MCSR */
- do
- {
- SW_READ_REG(INCA_IP_Switch_MDIO_ACC, regValue);
- }
- while (regValue & (1 << 31));
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
+ } while (phyReg1 & (1 << 31));
- if (regValue & (1 << 1))
- {
+ if (phyReg1 & (1 << 1)) {
/* Signal detected */
break;
}
}
if (!retries)
- return -1;
+ goto Fail;
+#endif
/* Set MDI mode.
*/
@@ -671,43 +677,135 @@ static int inca_amdix(void)
/* Wait for link.
*/
retries = WAIT_LINK_RETRIES;
- while (--retries)
- {
+ while (--retries) {
udelay(LINK_RETRY_DELAY * 1000);
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
(0x1 << 31) | /* RA */
(0x0 << 30) | /* Read */
(0x6 << 21) | /* LAN */
(1 << 16)); /* PHY_BSR */
- do
- {
- SW_READ_REG(INCA_IP_Switch_MDIO_ACC, regValue);
- }
- while (regValue & (1 << 31));
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
+ } while (phyReg1 & (1 << 31));
- if (regValue & (1 << 2))
- {
+ if (phyReg1 & (1 << 2)) {
/* Link is up */
break;
- }
- else if (mdi_flag)
- {
+ } else if (mdi_flag) {
/* Set MDIX mode */
*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
mdi_flag = 0;
- }
- else
- {
+ } else {
/* Set MDI mode */
*INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX);
mdi_flag = 1;
}
}
- if (!retries)
- return -1;
+ if (!retries) {
+ goto Fail;
+ } else {
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (1 << 16)); /* PHY_BSR */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1);
+ } while (phyReg1 & (1 << 31));
+
+ /* Auto-negotiation / Parallel detection complete
+ */
+ if (phyReg1 & (1 << 5)) {
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (31 << 16)); /* PHY_SCSR */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31);
+ } while (phyReg31 & (1 << 31));
+
+ switch ((phyReg31 >> 2) & 0x7) {
+ case INCA_SWITCH_PHY_SPEED_10H:
+ /* 10Base-T Half-duplex */
+ regEphy = 0;
+ break;
+ case INCA_SWITCH_PHY_SPEED_10F:
+ /* 10Base-T Full-duplex */
+ regEphy = INCA_IP_Switch_EPHY_DL;
+ break;
+ case INCA_SWITCH_PHY_SPEED_100H:
+ /* 100Base-TX Half-duplex */
+ regEphy = INCA_IP_Switch_EPHY_SL;
+ break;
+ case INCA_SWITCH_PHY_SPEED_100F:
+ /* 100Base-TX Full-duplex */
+ regEphy = INCA_IP_Switch_EPHY_SL | INCA_IP_Switch_EPHY_DL;
+ break;
+ }
+
+ /* In case of Auto-negotiation,
+ * update the negotiated PAUSE support status
+ */
+ if (phyReg1 & (1 << 3)) {
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (6 << 16)); /* PHY_ANER */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6);
+ } while (phyReg6 & (1 << 31));
+
+ /* We are Autoneg-able.
+ * Is Link partner also able to autoneg?
+ */
+ if (phyReg6 & (1 << 0)) {
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (4 << 16)); /* PHY_ANAR */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4);
+ } while (phyReg4 & (1 << 31));
+
+ /* We advertise PAUSE capab.
+ * Does link partner also advertise it?
+ */
+ if (phyReg4 & (1 << 10)) {
+ SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC,
+ (0x1 << 31) | /* RA */
+ (0x0 << 30) | /* Read */
+ (0x6 << 21) | /* LAN */
+ (5 << 16)); /* PHY_ANLPAR */
+ do {
+ SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5);
+ } while (phyReg5 & (1 << 31));
+
+ /* Link partner is PAUSE capab.
+ */
+ if (phyReg5 & (1 << 10)) {
+ regEphy |= INCA_IP_Switch_EPHY_PL;
+ }
+ }
+ }
+
+ }
+
+ /* Link is up */
+ regEphy |= INCA_IP_Switch_EPHY_LL;
+
+ SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy);
+ }
+ }
return 0;
+
+Fail:
+ printf("No Link on LAN port\n");
+ return -1;
}
#endif /* CONFIG_INCA_IP_SWITCH_AMDIX */