diff options
author | wdenk <wdenk> | 2002-11-02 22:58:18 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2002-11-02 22:58:18 +0000 |
commit | cc1c8a136f9813d0a9cb9a94d2f12206873ddc4e (patch) | |
tree | 912691be4a212b399eb470411acd27c8bb6375da /drivers | |
parent | 1a4d6164af8f79c0979a2af45d7f5e5353562b19 (diff) |
Initial revision
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/bcm570x.c | 1709 |
1 files changed, 1709 insertions, 0 deletions
diff --git a/drivers/bcm570x.c b/drivers/bcm570x.c new file mode 100644 index 00000000000..a88880ad3fa --- /dev/null +++ b/drivers/bcm570x.c @@ -0,0 +1,1709 @@ +/* + * Broadcom BCM570x Ethernet Driver for U-Boot. + * Support 5701, 5702, 5703, and 5704. Single instance driver. + * Copyright (C) 2002 James F. Dougherty (jfd@broadcom.com) + */ + +#include <common.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NET) && (!defined(CONFIG_NET_MULTI)) && \ + defined(CONFIG_BCM570x) + +#ifdef CONFIG_BMW +#include <mpc824x.h> +#endif +#include <net.h> +#include "bcm570x_mm.h" +#include "bcm570x_autoneg.h" +#include <pci.h> +#include <malloc.h> + + + +/* + * PCI Registers and definitions. + */ +#define PCI_CMD_MASK 0xffff0000 /* mask to save status bits */ +#define PCI_ANY_ID (~0) + +/* + * PCI memory base for Ethernet device as well as device Interrupt. + */ +#define BCM570X_MBAR 0x80100000 +#define BCM570X_ILINE 1 + + + +#define SECOND_USEC 1000000 +#define MAX_PACKET_SIZE 1600 +#define MAX_UNITS 4 + +/* Globals to this module */ +int initialized = 0; +unsigned int ioBase = 0; +volatile PLM_DEVICE_BLOCK pDevice = NULL; /* 570x softc */ +volatile PUM_DEVICE_BLOCK pUmDevice = NULL; + +/* Used to pass the full-duplex flag, etc. */ +int line_speed[MAX_UNITS] = {0,0,0,0}; +static int full_duplex[MAX_UNITS] = {1,1,1,1}; +static int rx_flow_control[MAX_UNITS] = {0,0,0,0}; +static int tx_flow_control[MAX_UNITS] = {0,0,0,0}; +static int auto_flow_control[MAX_UNITS] = {0,0,0,0}; +static int tx_checksum[MAX_UNITS] = {1,1,1,1}; +static int rx_checksum[MAX_UNITS] = {1,1,1,1}; +static int auto_speed[MAX_UNITS] = {1,1,1,1}; + +#if JUMBO_FRAMES +/* Jumbo MTU for interfaces. */ +static int mtu[MAX_UNITS] = {0,0,0,0}; +#endif + +/* Turn on Wake-on lan for a device unit */ +static int enable_wol[MAX_UNITS] = {0,0,0,0}; + +#define TX_DESC_CNT DEFAULT_TX_PACKET_DESC_COUNT +static unsigned int tx_pkt_desc_cnt[MAX_UNITS] = + {TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT, TX_DESC_CNT}; + +#define RX_DESC_CNT DEFAULT_STD_RCV_DESC_COUNT +static unsigned int rx_std_desc_cnt[MAX_UNITS] = + {RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT}; + +static unsigned int rx_adaptive_coalesce[MAX_UNITS] = {1,1,1,1}; + +#if T3_JUMBO_RCV_RCB_ENTRY_COUNT +#define JBO_DESC_CNT DEFAULT_JUMBO_RCV_DESC_COUNT +static unsigned int rx_jumbo_desc_cnt[MAX_UNITS] = + {JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT}; +#endif +#define RX_COAL_TK DEFAULT_RX_COALESCING_TICKS +static unsigned int rx_coalesce_ticks[MAX_UNITS] = + {RX_COAL_TK, RX_COAL_TK, RX_COAL_TK, RX_COAL_TK}; + +#define RX_COAL_FM DEFAULT_RX_MAX_COALESCED_FRAMES +static unsigned int rx_max_coalesce_frames[MAX_UNITS] = + {RX_COAL_FM, RX_COAL_FM, RX_COAL_FM, RX_COAL_FM}; + +#define TX_COAL_TK DEFAULT_TX_COALESCING_TICKS +static unsigned int tx_coalesce_ticks[MAX_UNITS] = + {TX_COAL_TK, TX_COAL_TK, TX_COAL_TK, TX_COAL_TK}; + +#define TX_COAL_FM DEFAULT_TX_MAX_COALESCED_FRAMES +static unsigned int tx_max_coalesce_frames[MAX_UNITS] = + {TX_COAL_FM, TX_COAL_FM, TX_COAL_FM, TX_COAL_FM}; + +#define ST_COAL_TK DEFAULT_STATS_COALESCING_TICKS +static unsigned int stats_coalesce_ticks[MAX_UNITS] = + {ST_COAL_TK, ST_COAL_TK, ST_COAL_TK, ST_COAL_TK}; + + + +/* + * Legitimate values for BCM570x device types + */ +typedef enum { + BCM5700VIGIL = 0, + BCM5700A6, + BCM5700T6, + BCM5700A9, + BCM5700T9, + BCM5700, + BCM5701A5, + BCM5701T1, + BCM5701T8, + BCM5701A7, + BCM5701A10, + BCM5701A12, + BCM5701, + BCM5702, + BCM5703, + BCM5703A31, + TC996T, + TC996ST, + TC996SSX, + TC996SX, + TC996BT, + TC997T, + TC997SX, + TC1000T, + TC940BR01, + TC942BR01, + NC6770, + NC7760, + NC7770, + NC7780 +} board_t; + +/* Chip-Rev names for each device-type */ +static struct { + char* name; +} chip_rev[] = { + {"BCM5700VIGIL"}, + {"BCM5700A6"}, + {"BCM5700T6"}, + {"BCM5700A9"}, + {"BCM5700T9"}, + {"BCM5700"}, + {"BCM5701A5"}, + {"BCM5701T1"}, + {"BCM5701T8"}, + {"BCM5701A7"}, + {"BCM5701A10"}, + {"BCM5701A12"}, + {"BCM5701"}, + {"BCM5702"}, + {"BCM5703"}, + {"BCM5703A31"}, + {"TC996T"}, + {"TC996ST"}, + {"TC996SSX"}, + {"TC996SX"}, + {"TC996BT"}, + {"TC997T"}, + {"TC997SX"}, + {"TC1000T"}, + {"TC940BR01"}, + {"TC942BR01"}, + {"NC6770"}, + {"NC7760"}, + {"NC7770"}, + {"NC7780"}, + {0} +}; + + +/* indexed by board_t, above */ +static struct { + char *name; +} board_info[] = { + { "Broadcom Vigil B5700 1000Base-T" }, + { "Broadcom BCM5700 1000Base-T" }, + { "Broadcom BCM5700 1000Base-SX" }, + { "Broadcom BCM5700 1000Base-SX" }, + { "Broadcom BCM5700 1000Base-T" }, + { "Broadcom BCM5700" }, + { "Broadcom BCM5701 1000Base-T" }, + { "Broadcom BCM5701 1000Base-T" }, + { "Broadcom BCM5701 1000Base-T" }, + { "Broadcom BCM5701 1000Base-SX" }, + { "Broadcom BCM5701 1000Base-T" }, + { "Broadcom BCM5701 1000Base-T" }, + { "Broadcom BCM5701" }, + { "Broadcom BCM5702 1000Base-T" }, + { "Broadcom BCM5703 1000Base-T" }, + { "Broadcom BCM5703 1000Base-SX" }, + { "3Com 3C996 10/100/1000 Server NIC" }, + { "3Com 3C996 10/100/1000 Server NIC" }, + { "3Com 3C996 Gigabit Fiber-SX Server NIC" }, + { "3Com 3C996 Gigabit Fiber-SX Server NIC" }, + { "3Com 3C996B Gigabit Server NIC" }, + { "3Com 3C997 Gigabit Server NIC" }, + { "3Com 3C997 Gigabit Fiber-SX Server NIC" }, + { "3Com 3C1000 Gigabit NIC" }, + { "3Com 3C940 Gigabit LOM (21X21)" }, + { "3Com 3C942 Gigabit LOM (31X31)" }, + { "Compaq NC6770 Gigabit Server Adapter" }, + { "Compaq NC7760 Gigabit Server Adapter" }, + { "Compaq NC7770 Gigabit Server Adapter" }, + { "Compaq NC7780 Gigabit Server Adapter" }, + { 0 }, +}; + +/* PCI Devices which use the 570x chipset */ +struct pci_device_table { + unsigned short vendor_id, device_id; /* Vendor/DeviceID */ + unsigned short subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */ + unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */ + unsigned long board_id; /* Data private to the driver */ + int io_size, min_latency; +} bcm570xDevices[] = { + {0x14e4, 0x1644, 0x1014, 0x0277, 0, 0, BCM5700VIGIL ,128,32}, + {0x14e4, 0x1644, 0x14e4, 0x1644, 0, 0, BCM5700A6 ,128,32}, + {0x14e4, 0x1644, 0x14e4, 0x2, 0, 0, BCM5700T6 ,128,32}, + {0x14e4, 0x1644, 0x14e4, 0x3, 0, 0, BCM5700A9 ,128,32}, + {0x14e4, 0x1644, 0x14e4, 0x4, 0, 0, BCM5700T9 ,128,32}, + {0x14e4, 0x1644, 0x1028, 0xd1, 0, 0, BCM5700 ,128,32}, + {0x14e4, 0x1644, 0x1028, 0x0106, 0, 0, BCM5700 ,128,32}, + {0x14e4, 0x1644, 0x1028, 0x0109, 0, 0, BCM5700 ,128,32}, + {0x14e4, 0x1644, 0x1028, 0x010a, 0, 0, BCM5700 ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1000, 0, 0, TC996T ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1001, 0, 0, TC996ST ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1002, 0, 0, TC996SSX ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1003, 0, 0, TC997T ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1005, 0, 0, TC997SX ,128,32}, + {0x14e4, 0x1644, 0x10b7, 0x1008, 0, 0, TC942BR01 ,128,32}, + {0x14e4, 0x1644, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5700 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 1, 0, 0, BCM5701A5 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 5, 0, 0, BCM5701T1 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 6, 0, 0, BCM5701T8 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 7, 0, 0, BCM5701A7 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 8, 0, 0, BCM5701A10 ,128,32}, + {0x14e4, 0x1645, 0x14e4, 0x8008, 0, 0, BCM5701A12 ,128,32}, + {0x14e4, 0x1645, 0x0e11, 0xc1, 0, 0, NC6770 ,128,32}, + {0x14e4, 0x1645, 0x0e11, 0x7c, 0, 0, NC7770 ,128,32}, + {0x14e4, 0x1645, 0x0e11, 0x85, 0, 0, NC7780 ,128,32}, + {0x14e4, 0x1645, 0x1028, 0x0121, 0, 0, BCM5701 ,128,32}, + {0x14e4, 0x1645, 0x10b7, 0x1004, 0, 0, TC996SX ,128,32}, + {0x14e4, 0x1645, 0x10b7, 0x1006, 0, 0, TC996BT ,128,32}, + {0x14e4, 0x1645, 0x10b7, 0x1007, 0, 0, TC1000T ,128,32}, + {0x14e4, 0x1645, 0x10b7, 0x1008, 0, 0, TC940BR01 ,128,32}, + {0x14e4, 0x1645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5701 ,128,32}, + {0x14e4, 0x1646, 0x14e4, 0x8009, 0, 0, BCM5702 ,128,32}, + {0x14e4, 0x1646, 0x0e11, 0xbb, 0, 0, NC7760 ,128,32}, + {0x14e4, 0x1646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702 ,128,32}, + {0x14e4, 0x16a6, 0x14e4, 0x8009, 0, 0, BCM5702 ,128,32}, + {0x14e4, 0x16a6, 0x0e11, 0xbb, 0, 0, NC7760 ,128,32}, + {0x14e4, 0x16a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702 ,128,32}, + {0x14e4, 0x1647, 0x14e4, 0x0009, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x1647, 0x14e4, 0x000a, 0, 0, BCM5703A31 ,128,32}, + {0x14e4, 0x1647, 0x14e4, 0x000b, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x1647, 0x14e4, 0x800a, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x1647, 0x0e11, 0x9a, 0, 0, NC7770 ,128,32}, + {0x14e4, 0x1647, 0x0e11, 0x99, 0, 0, NC7780 ,128,32}, + {0x14e4, 0x1647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x16a7, 0x14e4, 0x0009, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x16a7, 0x14e4, 0x000a, 0, 0, BCM5703A31 ,128,32}, + {0x14e4, 0x16a7, 0x14e4, 0x000b, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x16a7, 0x14e4, 0x800a, 0, 0, BCM5703 ,128,32}, + {0x14e4, 0x16a7, 0x0e11, 0x9a, 0, 0, NC7770 ,128,32}, + {0x14e4, 0x16a7, 0x0e11, 0x99, 0, 0, NC7780 ,128,32}, + {0x14e4, 0x16a7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703 ,128,32} +}; + +#define n570xDevices (sizeof(bcm570xDevices)/sizeof(bcm570xDevices[0])) + + + +/* + * Allocate a packet buffer from the bcm570x packet pool. + */ +void * +bcm570xPktAlloc(int u, int pksize) +{ + return malloc(pksize); +} + +/* + * Free a packet previously allocated from the bcm570x packet + * buffer pool. + */ +void +bcm570xPktFree(int u, void *p) +{ + free(p); +} + +int +bcm570xReplenishRxBuffers(PUM_DEVICE_BLOCK pUmDevice) +{ + PLM_PACKET pPacket; + PUM_PACKET pUmPacket; + void *skb; + int queue_rx = 0; + int ret = 0; + + while ((pUmPacket = (PUM_PACKET) + QQ_PopHead(&pUmDevice->rx_out_of_buf_q.Container)) != 0) { + + pPacket = (PLM_PACKET) pUmPacket; + + /* reuse an old skb */ + if (pUmPacket->skbuff) { + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + queue_rx = 1; + continue; + } + if ( ( skb = bcm570xPktAlloc(pUmDevice->index, + pPacket->u.Rx.RxBufferSize + 2)) == 0) { + QQ_PushHead(&pUmDevice->rx_out_of_buf_q.Container,pPacket); + printf("NOTICE: Out of RX memory.\n"); + ret = 1; + break; + } + + pUmPacket->skbuff = skb; + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + queue_rx = 1; + } + + if (queue_rx) { + LM_QueueRxPackets(pDevice); + } + + return ret; +} + +/* + * Probe, Map, and Init 570x device. + */ +int eth_init(bd_t *bis) +{ + int i, rv, devFound = FALSE; + pci_dev_t devbusfn; + unsigned short status; + + /* Find PCI device, if it exists, configure ... */ + for( i = 0; i < n570xDevices; i++){ + devbusfn = pci_find_device(bcm570xDevices[i].vendor_id, + bcm570xDevices[i].device_id, 0); + if(devbusfn == -1) { + continue; /* No device of that vendor/device ID */ + } else { + + /* Set ILINE */ + pci_write_config_byte(devbusfn, + PCI_INTERRUPT_LINE, BCM570X_ILINE); + + /* + * 0x10 - 0x14 define one 64-bit MBAR. + * 0x14 is the higher-order address bits of the BAR. + */ + pci_write_config_dword(devbusfn, + PCI_BASE_ADDRESS_1, 0); + + ioBase = BCM570X_MBAR; + + pci_write_config_dword(devbusfn, + PCI_BASE_ADDRESS_0, ioBase); + + /* + * Enable PCI memory, IO, and Master -- don't + * reset any status bits in doing so. + */ + pci_read_config_word(devbusfn, + PCI_COMMAND, &status); + + status |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER; + + pci_write_config_word(devbusfn, + PCI_COMMAND, status); + + printf("\n%s: bus %d, device %d, function %d: MBAR=0x%x\n", + board_info[bcm570xDevices[i].board_id].name, + PCI_BUS(devbusfn), + PCI_DEV(devbusfn), + PCI_FUNC(devbusfn), + ioBase); + + /* Allocate once, but always clear on init */ + if (!pDevice) { + pDevice = malloc(sizeof(UM_DEVICE_BLOCK)); + pUmDevice = (PUM_DEVICE_BLOCK)pDevice; + memset(pDevice, 0x0, sizeof(UM_DEVICE_BLOCK)); + } + + /* Configure pci dev structure */ + pUmDevice->pdev = devbusfn; + pUmDevice->index = 0; + pUmDevice->tx_pkt = 0; + pUmDevice->rx_pkt = 0; + devFound = TRUE; + break; + } + } + + if(!devFound){ + printf("eth_init: FAILURE: no BCM570x Ethernet devices found.\n"); + return -1; + } + + /* Setup defaults for chip */ + pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE; + + if (pDevice->ChipRevId == T3_CHIP_ID_5700_B0) { + pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE; + } else { + + if (rx_checksum[i]) { + pDevice->TaskToOffload |= + LM_TASK_OFFLOAD_RX_TCP_CHECKSUM | + LM_TASK_OFFLOAD_RX_UDP_CHECKSUM; + } + + if (tx_checksum[i]) { + pDevice->TaskToOffload |= + LM_TASK_OFFLOAD_TX_TCP_CHECKSUM | + LM_TASK_OFFLOAD_TX_UDP_CHECKSUM; + pDevice->NoTxPseudoHdrChksum = TRUE; + } + } + + /* Set Device PCI Memory base address */ + pDevice->pMappedMemBase = (PLM_UINT8) ioBase; + + /* Pull down adapter info */ + if ((rv = LM_GetAdapterInfo(pDevice)) != LM_STATUS_SUCCESS) { + printf("bcm570xEnd: LM_GetAdapterInfo failed: rv=%d!\n", rv ); + return -2; + } + + /* Lock not needed */ + pUmDevice->do_global_lock = 0; + + if (T3_ASIC_REV(pUmDevice->lm_dev.ChipRevId) == T3_ASIC_REV_5700) { + /* The 5700 chip works best without interleaved register */ + /* accesses on certain machines. */ + pUmDevice->do_global_lock = 1; + } + + /* Setup timer delays */ + if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) { + pDevice->UseTaggedStatus = TRUE; + pUmDevice->timer_interval = CFG_HZ; + } + else { + pUmDevice->timer_interval = CFG_HZ / 50; + } + + /* Grab name .... */ + pUmDevice->name = + (char*)malloc(strlen(board_info[bcm570xDevices[i].board_id].name)+1); + strcpy(pUmDevice->name,board_info[bcm570xDevices[i].board_id].name); + + memcpy(pDevice->NodeAddress, bis->bi_enetaddr, 6); + LM_SetMacAddress(pDevice, bis->bi_enetaddr); + /* Init queues .. */ + QQ_InitQueue(&pUmDevice->rx_out_of_buf_q.Container, + MAX_RX_PACKET_DESC_COUNT); + pUmDevice->rx_last_cnt = pUmDevice->tx_last_cnt = 0; + + /* delay for 4 seconds */ + pUmDevice->delayed_link_ind = + (4 * CFG_HZ) / pUmDevice->timer_interval; + + pUmDevice->adaptive_expiry = + CFG_HZ / pUmDevice->timer_interval; + + /* Sometimes we get spurious ints. after reset when link is down. */ + /* This field tells the isr to service the int. even if there is */ + /* no status block update. */ + pUmDevice->adapter_just_inited = + (3 * CFG_HZ) / pUmDevice->timer_interval; + + /* Initialize 570x */ + if (LM_InitializeAdapter(pDevice) != LM_STATUS_SUCCESS) { + printf("ERROR: Adapter initialization failed.\n"); + return ERROR; + } + + /* Enable chip ISR */ + LM_EnableInterrupt(pDevice); + + /* Clear MC table */ + LM_MulticastClear(pDevice); + + /* Enable Multicast */ + LM_SetReceiveMask(pDevice, + pDevice->ReceiveMask | LM_ACCEPT_ALL_MULTICAST); + + pUmDevice->opened = 1; + pUmDevice->tx_full = 0; + pUmDevice->tx_pkt = 0; + pUmDevice->rx_pkt = 0; + printf("eth%d: %s @0x%lx,", + pDevice->index, pUmDevice->name, (unsigned long)ioBase); + printf( "node addr "); + for (i = 0; i < 6; i++) { + printf("%2.2x", pDevice->NodeAddress[i]); + } + printf("\n"); + + printf("eth%d: ", pDevice->index); + printf("%s with ", + chip_rev[bcm570xDevices[i].board_id].name); + + if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5400_PHY_ID) + printf("Broadcom BCM5400 Copper "); + else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID) + printf("Broadcom BCM5401 Copper "); + else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5411_PHY_ID) + printf("Broadcom BCM5411 Copper "); + else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5701_PHY_ID) + printf("Broadcom BCM5701 Integrated Copper "); + else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5703_PHY_ID) + printf("Broadcom BCM5703 Integrated Copper "); + else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM8002_PHY_ID) + printf("Broadcom BCM8002 SerDes "); + else if (pDevice->EnableTbi) + printf("Agilent HDMP-1636 SerDes "); + else + printf("Unknown "); + printf("transceiver found\n"); + + printf("eth%d: %s, MTU: %d,", + pDevice->index, pDevice->BusSpeedStr, 1500); + + if ((pDevice->ChipRevId != T3_CHIP_ID_5700_B0) && + rx_checksum[i]) + printf("Rx Checksum ON\n"); + else + printf("Rx Checksum OFF\n"); + initialized++; + + return 0; +} + +/* Ethernet Interrupt service routine */ +void +eth_isr(void) +{ + LM_UINT32 oldtag, newtag; + int i; + + pUmDevice->interrupt = 1; + + if (pDevice->UseTaggedStatus) { + if ((pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) || + pUmDevice->adapter_just_inited) { + MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 1); + oldtag = pDevice->pStatusBlkVirt->StatusTag; + + for (i = 0; ; i++) { + pDevice->pStatusBlkVirt->Status &= ~STATUS_BLOCK_UPDATED; + LM_ServiceInterrupts(pDevice); + newtag = pDevice->pStatusBlkVirt->StatusTag; + if ((newtag == oldtag) || (i > 50)) { + MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, newtag << 24); + if (pDevice->UndiFix) { + REG_WR(pDevice, Grc.LocalCtrl, + pDevice->GrcLocalCtrl | 0x2); + } + break; + } + oldtag = newtag; + } + } + } + else { + while (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) { + unsigned int dummy; + + pDevice->pMemView->Mailbox.Interrupt[0].Low = 1; + pDevice->pStatusBlkVirt->Status &= ~STATUS_BLOCK_UPDATED; + LM_ServiceInterrupts(pDevice); + pDevice->pMemView->Mailbox.Interrupt[0].Low = 0; + dummy = pDevice->pMemView->Mailbox.Interrupt[0].Low; + } + } + + /* Allocate new RX buffers */ + if (QQ_GetEntryCnt(&pUmDevice->rx_out_of_buf_q.Container)) { + bcm570xReplenishRxBuffers(pUmDevice); + } + + /* Queue packets */ + if (QQ_GetEntryCnt(&pDevice->RxPacketFreeQ.Container)) { + LM_QueueRxPackets(pDevice); + } + + if (pUmDevice->tx_queued) { + pUmDevice->tx_queued = 0; + } + + if(pUmDevice->tx_full){ + if(pDevice->LinkStatus != LM_STATUS_LINK_DOWN){ + printf("NOTICE: tx was previously blocked, restarting MUX\n"); + pUmDevice->tx_full = 0; + } + } + + pUmDevice->interrupt = 0; + +} + +int +eth_send(volatile void *packet, int length) +{ + int status = 0; +#if ET_DEBUG + unsigned char* ptr = (unsigned char*)packet; +#endif + PLM_PACKET pPacket; + PUM_PACKET pUmPacket; + + /* Link down, return */ + while(pDevice->LinkStatus == LM_STATUS_LINK_DOWN) { +#if 0 + printf("eth%d: link down - check cable or link partner.\n", + pUmDevice->index); +#endif + eth_isr(); + + /* Wait to see link for one-half a second before sending ... */ + udelay(1500000); + + } + + /* Clear sent flag */ + pUmDevice->tx_pkt = 0; + + /* Previously blocked */ + if(pUmDevice->tx_full){ + printf("eth%d: tx blocked.\n", pUmDevice->index); + return 0; + } + + pPacket = (PLM_PACKET) + QQ_PopHead(&pDevice->TxPacketFreeQ.Container); + + if (pPacket == 0) { + pUmDevice->tx_full = 1; + printf("bcm570xEndSend: TX full!\n"); + return 0; + } + + if (pDevice->SendBdLeft.counter == 0) { + pUmDevice->tx_full = 1; + printf("bcm570xEndSend: no more TX descriptors!\n"); + QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket); + return 0; + } + + if (length <= 0){ + printf("eth: bad packet size: %d\n", length); + goto out; + } + + /* Get packet buffers and fragment list */ + pUmPacket = (PUM_PACKET) pPacket; + /* Single DMA Descriptor transmit. + * Fragments may be provided, but one DMA descriptor max is + * used to send the packet. + */ + if (MM_CoalesceTxBuffer (pDevice, pPacket) != LM_STATUS_SUCCESS) { + if (pUmPacket->skbuff == NULL){ + /* Packet was discarded */ + printf("TX: failed (1)\n"); + status = 1; + } else{ + printf("TX: failed (2)\n"); + status = 2; + } + QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket); + return status; + } + + /* Copy packet to DMA buffer */ + memset(pUmPacket->skbuff, 0x0, MAX_PACKET_SIZE); + memcpy((void*)pUmPacket->skbuff, (void*)packet, length); + pPacket->PacketSize = length; + pPacket->Flags |= SND_BD_FLAG_END|SND_BD_FLAG_COAL_NOW; + pPacket->u.Tx.FragCount = 1; + /* We've already provided a frame ready for transmission */ + pPacket->Flags &= ~SND_BD_FLAG_TCP_UDP_CKSUM; + + if ( LM_SendPacket(pDevice, pPacket) == LM_STATUS_FAILURE){ + /* + * A lower level send failure will push the packet descriptor back + * in the free queue, so just deal with the VxWorks clusters. + */ + if (pUmPacket->skbuff == NULL){ + printf("TX failed (1)!\n"); + /* Packet was discarded */ + status = 3; + } else { + /* A resource problem ... */ + printf("TX failed (2)!\n"); + status = 4; + } + + if (QQ_GetEntryCnt(&pDevice->TxPacketFreeQ.Container) == 0) { + printf("TX: emptyQ!\n"); + pUmDevice->tx_full = 1; + } + } + + while(pUmDevice->tx_pkt == 0){ + /* Service TX */ + eth_isr(); + } +#if ET_DEBUG + printf("eth_send: 0x%x, %d bytes\n" + "[%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x] ...\n", + (int)pPacket, length, + ptr[0],ptr[1],ptr[2],ptr[3],ptr[4],ptr[5], + ptr[6],ptr[7],ptr[8],ptr[9],ptr[10],ptr[11],ptr[12], + ptr[13],ptr[14],ptr[15]); +#endif + pUmDevice->tx_pkt = 0; + QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket); + + /* Done with send */ + out: + return status; +} + + +/* Ethernet receive */ +int +eth_rx(void) +{ + PLM_PACKET pPacket = NULL; + PUM_PACKET pUmPacket = NULL; + void *skb; + int size=0; + + while(TRUE) { + + bcm570x_service_isr: + /* Pull down packet if it is there */ + eth_isr(); + + /* Indicate RX packets called */ + if(pUmDevice->rx_pkt){ + /* printf("eth_rx: got a packet...\n"); */ + pUmDevice->rx_pkt = 0; + } else { + /* printf("eth_rx: waiting for packet...\n"); */ + goto bcm570x_service_isr; + } + + pPacket = (PLM_PACKET) + QQ_PopHead(&pDevice->RxPacketReceivedQ.Container); + + if (pPacket == 0){ + printf("eth_rx: empty packet!\n"); + goto bcm570x_service_isr; + } + + pUmPacket = (PUM_PACKET) pPacket; +#if ET_DEBUG + printf("eth_rx: packet @0x%x\n", + (int)pPacket); +#endif + /* If the packet generated an error, reuse buffer */ + if ((pPacket->PacketStatus != LM_STATUS_SUCCESS) || + ((size = pPacket->PacketSize) > pDevice->RxMtu)) { + + /* reuse skb */ + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + printf("eth_rx: error in packet dma!\n"); + goto bcm570x_service_isr; + } + + /* Set size and address */ + skb = pUmPacket->skbuff; + size = pPacket->PacketSize; + + /* Pass the packet up to the protocol + * layers. + */ + NetReceive(skb, size); + + /* Free packet buffer */ + bcm570xPktFree (pUmDevice->index, skb); + pUmPacket->skbuff = NULL; + + /* Reuse SKB */ + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + + return 0; /* Got a packet, bail ... */ + } + return size; +} + + + +/* Shut down device */ +void +eth_halt(void) +{ + int i; + if ( initialized) + if (pDevice && pUmDevice && pUmDevice->opened){ + printf("\neth%d:%s,", pUmDevice->index, pUmDevice->name); + printf("HALT,"); + /* stop device */ + LM_Halt(pDevice); + printf("POWER DOWN,"); + LM_SetPowerState(pDevice, LM_POWER_STATE_D3); + + /* Free the memory allocated by the device in tigon3 */ + for (i = 0; i < pUmDevice->mem_list_num; i++) { + if (pUmDevice->mem_list[i]) { + /* sanity check */ + if (pUmDevice->dma_list[i]) { /* cache-safe memory */ + free(pUmDevice->mem_list[i]); + } else { + free(pUmDevice->mem_list[i]); /* normal memory */ + } + } + } + pUmDevice->opened = 0; + free(pDevice); + pDevice = NULL; + pUmDevice = NULL; + initialized = 0; + printf("done - offline.\n"); + } +} + + + + +/* + * + * Middle Module: Interface between the HW driver (tigon3 modules) and + * the native (SENS) driver. These routines implement the system + * interface for tigon3 on VxWorks. + */ + +/* Middle module dependency - size of a packet descriptor */ +int MM_Packet_Desc_Size = sizeof(UM_PACKET); + + +LM_STATUS +MM_ReadConfig32(PLM_DEVICE_BLOCK pDevice, + LM_UINT32 Offset, + LM_UINT32 *pValue32) +{ + UM_DEVICE_BLOCK *pUmDevice; + pUmDevice = (UM_DEVICE_BLOCK *) pDevice; + pci_read_config_dword(pUmDevice->pdev, + Offset, (u32 *) pValue32); + return LM_STATUS_SUCCESS; +} + + +LM_STATUS +MM_WriteConfig32(PLM_DEVICE_BLOCK pDevice, + LM_UINT32 Offset, + LM_UINT32 Value32) +{ + UM_DEVICE_BLOCK *pUmDevice; + pUmDevice = (UM_DEVICE_BLOCK *) pDevice; + pci_write_config_dword(pUmDevice->pdev, + Offset, Value32); + return LM_STATUS_SUCCESS; +} + + +LM_STATUS +MM_ReadConfig16(PLM_DEVICE_BLOCK pDevice, + LM_UINT32 Offset, + LM_UINT16 *pValue16) +{ + UM_DEVICE_BLOCK *pUmDevice; + pUmDevice = (UM_DEVICE_BLOCK *) pDevice; + pci_read_config_word(pUmDevice->pdev, + Offset, (u16*) pValue16); + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_WriteConfig16(PLM_DEVICE_BLOCK pDevice, + LM_UINT32 Offset, + LM_UINT16 Value16) +{ + UM_DEVICE_BLOCK *pUmDevice; + pUmDevice = (UM_DEVICE_BLOCK *) pDevice; + pci_write_config_word(pUmDevice->pdev, + Offset, Value16); + return LM_STATUS_SUCCESS; +} + + +LM_STATUS +MM_AllocateSharedMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize, + PLM_VOID *pMemoryBlockVirt, + PLM_PHYSICAL_ADDRESS pMemoryBlockPhy, + LM_BOOL Cached) +{ + PLM_VOID pvirt; + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + dma_addr_t mapping; + + pvirt = malloc(BlockSize); + mapping = (dma_addr_t)(pvirt); + if (!pvirt) + return LM_STATUS_FAILURE; + + pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt; + pUmDevice->dma_list[pUmDevice->mem_list_num] = mapping; + pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize; + memset(pvirt, 0, BlockSize); + + *pMemoryBlockVirt = (PLM_VOID) pvirt; + MM_SetAddr (pMemoryBlockPhy, (dma_addr_t) mapping); + + return LM_STATUS_SUCCESS; +} + + + +LM_STATUS +MM_AllocateMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize, + PLM_VOID *pMemoryBlockVirt) +{ + PLM_VOID pvirt; + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + + pvirt = malloc(BlockSize); + + if (!pvirt) + return LM_STATUS_FAILURE; + + pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt; + pUmDevice->dma_list[pUmDevice->mem_list_num] = 0; + pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize; + memset(pvirt, 0, BlockSize); + *pMemoryBlockVirt = pvirt; + + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_MapMemBase(PLM_DEVICE_BLOCK pDevice) +{ + printf("BCM570x PCI Memory base address @0x%x\n", + (unsigned int)pDevice->pMappedMemBase); + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_InitializeUmPackets(PLM_DEVICE_BLOCK pDevice) +{ + int i; + void* skb; + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + PUM_PACKET pUmPacket = NULL; + PLM_PACKET pPacket = NULL; + + for (i = 0; i < pDevice->RxPacketDescCnt; i++) { + pPacket = QQ_PopHead(&pDevice->RxPacketFreeQ.Container); + pUmPacket = (PUM_PACKET) pPacket; + + if (pPacket == 0) { + printf("MM_InitializeUmPackets: Bad RxPacketFreeQ\n"); + } + + skb = bcm570xPktAlloc(pUmDevice->index, + pPacket->u.Rx.RxBufferSize + 2); + + if (skb == 0) { + pUmPacket->skbuff = 0; + QQ_PushTail(&pUmDevice->rx_out_of_buf_q.Container, pPacket); + printf("MM_InitializeUmPackets: out of buffer.\n"); + continue; + } + + pUmPacket->skbuff = skb; + QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket); + } + + pUmDevice->rx_low_buf_thresh = pDevice->RxPacketDescCnt / 8; + + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_GetConfig(PLM_DEVICE_BLOCK pDevice) +{ + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + int index = pDevice->index; + + if (auto_speed[index] == 0) + pDevice->DisableAutoNeg = TRUE; + else + pDevice->DisableAutoNeg = FALSE; + + if (line_speed[index] == 0) { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_AUTO; + pDevice->DisableAutoNeg = FALSE; + } + else { + if (line_speed[index] == 1000) { + if (pDevice->EnableTbi) { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX; + } + else if (full_duplex[index]) { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX; + } + else { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS; + } + if (!pDevice->EnableTbi) + pDevice->DisableAutoNeg = FALSE; + } + else if (line_speed[index] == 100) { + if (full_duplex[index]) { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX; + } + else { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS; + } + } + else if (line_speed[index] == 10) { + if (full_duplex[index]) { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX; + } + else { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS; + } + } + else { + pDevice->RequestedMediaType = + LM_REQUESTED_MEDIA_TYPE_AUTO; + pDevice->DisableAutoNeg = FALSE; + } + + } + pDevice->FlowControlCap = 0; + if (rx_flow_control[index] != 0) { + pDevice->FlowControlCap |= LM_FLOW_CONTROL_RECEIVE_PAUSE; + } + if (tx_flow_control[index] != 0) { + pDevice->FlowControlCap |= LM_FLOW_CONTROL_TRANSMIT_PAUSE; + } + if ((auto_flow_control[index] != 0) && + (pDevice->DisableAutoNeg == FALSE)) { + + pDevice->FlowControlCap |= LM_FLOW_CONTROL_AUTO_PAUSE; + if ((tx_flow_control[index] == 0) && + (rx_flow_control[index] == 0)) { + pDevice->FlowControlCap |= + LM_FLOW_CONTROL_TRANSMIT_PAUSE | + LM_FLOW_CONTROL_RECEIVE_PAUSE; + } + } + + /* Default MTU for now */ + pUmDevice->mtu = 1500; + +#if T3_JUMBO_RCV_RCB_ENTRY_COUNT + if (pUmDevice->mtu > 1500) { + pDevice->RxMtu = pUmDevice->mtu; + pDevice->RxJumboDescCnt = DEFAULT_JUMBO_RCV_DESC_COUNT; + } + else { + pDevice->RxJumboDescCnt = 0; + } + pDevice->RxJumboDescCnt = rx_jumbo_desc_cnt[index]; +#else + pDevice->RxMtu = pUmDevice->mtu; +#endif + + if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) { + pDevice->UseTaggedStatus = TRUE; + pUmDevice->timer_interval = CFG_HZ; + } + else { + pUmDevice->timer_interval = CFG_HZ/50; + } + + pDevice->TxPacketDescCnt = tx_pkt_desc_cnt[index]; + pDevice->RxStdDescCnt = rx_std_desc_cnt[index]; + /* Note: adaptive coalescence really isn't adaptive in this driver */ + pUmDevice->rx_adaptive_coalesce = rx_adaptive_coalesce[index]; + if (!pUmDevice->rx_adaptive_coalesce) { + pDevice->RxCoalescingTicks = rx_coalesce_ticks[index]; + if (pDevice->RxCoalescingTicks > MAX_RX_COALESCING_TICKS) + pDevice->RxCoalescingTicks = MAX_RX_COALESCING_TICKS; + pUmDevice->rx_curr_coalesce_ticks =pDevice->RxCoalescingTicks; + + pDevice->RxMaxCoalescedFrames = rx_max_coalesce_frames[index]; + if (pDevice->RxMaxCoalescedFrames>MAX_RX_MAX_COALESCED_FRAMES) + pDevice->RxMaxCoalescedFrames = + MAX_RX_MAX_COALESCED_FRAMES; + pUmDevice->rx_curr_coalesce_frames = + pDevice->RxMaxCoalescedFrames; + pDevice->StatsCoalescingTicks = stats_coalesce_ticks[index]; + if (pDevice->StatsCoalescingTicks>MAX_STATS_COALESCING_TICKS) + pDevice->StatsCoalescingTicks= + MAX_STATS_COALESCING_TICKS; + } + else { + pUmDevice->rx_curr_coalesce_frames = + DEFAULT_RX_MAX_COALESCED_FRAMES; + pUmDevice->rx_curr_coalesce_ticks = + DEFAULT_RX_COALESCING_TICKS; + } + pDevice->TxCoalescingTicks = tx_coalesce_ticks[index]; + if (pDevice->TxCoalescingTicks > MAX_TX_COALESCING_TICKS) + pDevice->TxCoalescingTicks = MAX_TX_COALESCING_TICKS; + pDevice->TxMaxCoalescedFrames = tx_max_coalesce_frames[index]; + if (pDevice->TxMaxCoalescedFrames > MAX_TX_MAX_COALESCED_FRAMES) + pDevice->TxMaxCoalescedFrames = MAX_TX_MAX_COALESCED_FRAMES; + + if (enable_wol[index]) { + pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_MAGIC_PACKET; + pDevice->WakeUpMode = LM_WAKE_UP_MODE_MAGIC_PACKET; + } + pDevice->NicSendBd = TRUE; + + /* Don't update status blocks during interrupt */ + pDevice->RxCoalescingTicksDuringInt = 0; + pDevice->TxCoalescingTicksDuringInt = 0; + + return LM_STATUS_SUCCESS; + +} + + +LM_STATUS +MM_StartTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) +{ + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + printf("Start TX DMA: dev=%d packet @0x%x\n", + (int)pUmDevice->index, (unsigned int)pPacket); + + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_CompleteTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) +{ + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + printf("Complete TX DMA: dev=%d packet @0x%x\n", + (int)pUmDevice->index, (unsigned int)pPacket); + return LM_STATUS_SUCCESS; +} + + +LM_STATUS +MM_IndicateStatus(PLM_DEVICE_BLOCK pDevice, LM_STATUS Status) +{ + char buf[128]; + char lcd[4]; + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + LM_FLOW_CONTROL flow_control; + + pUmDevice->delayed_link_ind = 0; + memset(lcd, 0x0, 4); + + if (Status == LM_STATUS_LINK_DOWN) { + sprintf(buf,"eth%d: %s: NIC Link is down\n", + pUmDevice->index,pUmDevice->name); + lcd[0] = 'L';lcd[1]='N';lcd[2]='K';lcd[3] = '?'; + } else if (Status == LM_STATUS_LINK_ACTIVE) { + sprintf(buf,"eth%d:%s: ", pUmDevice->index, pUmDevice->name); + + if (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS){ + strcat(buf,"1000 Mbps "); + lcd[0] = '1';lcd[1]='G';lcd[2]='B'; + } else if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS){ + strcat(buf,"100 Mbps "); + lcd[0] = '1';lcd[1]='0';lcd[2]='0'; + } else if (pDevice->LineSpeed == LM_LINE_SPEED_10MBPS){ + strcat(buf,"10 Mbps "); + lcd[0] = '1';lcd[1]='0';lcd[2]=' '; + } + if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL){ + strcat(buf, "full duplex"); + lcd[3] = 'F'; + } else { + strcat(buf, "half duplex"); + lcd[3] = 'H'; + } + strcat(buf, " link up"); + + flow_control = pDevice->FlowControl & + (LM_FLOW_CONTROL_RECEIVE_PAUSE | + LM_FLOW_CONTROL_TRANSMIT_PAUSE); + + if (flow_control) { + if (flow_control & LM_FLOW_CONTROL_RECEIVE_PAUSE) { + strcat(buf,", receive "); + if (flow_control & LM_FLOW_CONTROL_TRANSMIT_PAUSE) + strcat(buf," & transmit "); + } + else { + strcat(buf,", transmit "); + } + strcat(buf,"flow control ON"); + } else { + strcat(buf, ", flow control OFF"); + } + strcat(buf,"\n"); + printf("%s",buf); + } +#if 0 + sysLedDsply(lcd[0],lcd[1],lcd[2],lcd[3]); +#endif + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_FreeRxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) +{ + + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + PUM_PACKET pUmPacket; + void *skb; + + pUmPacket = (PUM_PACKET) pPacket; + + if ((skb = pUmPacket->skbuff)) + bcm570xPktFree(pUmDevice->index, skb); + + pUmPacket->skbuff = 0; + + return LM_STATUS_SUCCESS; +} + +unsigned long +MM_AnGetCurrentTime_us(PAN_STATE_INFO pAnInfo) +{ + return get_timer(0); +} + +/* + * Transform an MBUF chain into a single MBUF. + * This routine will fail if the amount of data in the + * chain overflows a transmit buffer. In that case, + * the incoming MBUF chain will be freed. This routine can + * also fail by not being able to allocate a new MBUF (including + * cluster and mbuf headers). In that case the failure is + * non-fatal. The incoming cluster chain is not freed, giving + * the caller the choice of whether to try a retransmit later. + */ +LM_STATUS +MM_CoalesceTxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket) +{ + PUM_PACKET pUmPacket = (PUM_PACKET) pPacket; + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + void *skbnew; + int len = 0; + + if (len == 0) + return (LM_STATUS_SUCCESS); + + if (len > MAX_PACKET_SIZE){ + printf ("eth%d: xmit frame discarded, too big!, size = %d\n", + pUmDevice->index, len); + return (LM_STATUS_FAILURE); + } + + skbnew = bcm570xPktAlloc(pUmDevice->index, MAX_PACKET_SIZE); + + if (skbnew == NULL) { + pUmDevice->tx_full = 1; + printf ("eth%d: out of transmit buffers", pUmDevice->index); + return (LM_STATUS_FAILURE); + } + + /* New packet values */ + pUmPacket->skbuff = skbnew; + pUmPacket->lm_packet.u.Tx.FragCount = 1; + + return (LM_STATUS_SUCCESS); +} + + +LM_STATUS +MM_IndicateRxPackets(PLM_DEVICE_BLOCK pDevice) +{ + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + pUmDevice->rx_pkt = 1; + return LM_STATUS_SUCCESS; +} + +LM_STATUS +MM_IndicateTxPackets(PLM_DEVICE_BLOCK pDevice) +{ + PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice; + PLM_PACKET pPacket; + PUM_PACKET pUmPacket; + void *skb; + while ( TRUE ) { + + pPacket = (PLM_PACKET) + QQ_PopHead(&pDevice->TxPacketXmittedQ.Container); + + if (pPacket == 0) + break; + + pUmPacket = (PUM_PACKET) pPacket; + skb = (void*)pUmPacket->skbuff; + + /* + * Free MBLK if we transmitted a fragmented packet or a + * non-fragmented packet straight from the VxWorks + * buffer pool. If packet was copied to a local transmit + * buffer, then there's no MBUF to free, just free + * the transmit buffer back to the cluster pool. + */ + + if (skb) + bcm570xPktFree (pUmDevice->index, skb); + + pUmPacket->skbuff = 0; + QQ_PushTail(&pDevice->TxPacketFreeQ.Container, pPacket); + pUmDevice->tx_pkt = 1; + } + if (pUmDevice->tx_full) { + if (QQ_GetEntryCnt(&pDevice->TxPacketFreeQ.Container) >= + (QQ_GetSize(&pDevice->TxPacketFreeQ.Container) >> 1)) + pUmDevice->tx_full = 0; + } + return LM_STATUS_SUCCESS; +} + +/* + * Scan an MBUF chain until we reach fragment number "frag" + * Return its length and physical address. + */ +void MM_MapTxDma + ( + PLM_DEVICE_BLOCK pDevice, + struct _LM_PACKET *pPacket, + T3_64BIT_HOST_ADDR *paddr, + LM_UINT32 *len, + int frag) +{ + PUM_PACKET pUmPacket = (PUM_PACKET) pPacket; + *len = pPacket->PacketSize; + MM_SetT3Addr(paddr, (dma_addr_t) pUmPacket->skbuff); +} + +/* + * Convert an mbuf address, a CPU local virtual address, + * to a physical address as seen from a PCI device. Store the + * result at paddr. + */ +void MM_MapRxDma( + PLM_DEVICE_BLOCK pDevice, + struct _LM_PACKET *pPacket, + T3_64BIT_HOST_ADDR *paddr) +{ + PUM_PACKET pUmPacket = (PUM_PACKET) pPacket; + MM_SetT3Addr(paddr, (dma_addr_t) pUmPacket->skbuff); +} + +void +MM_SetAddr (LM_PHYSICAL_ADDRESS *paddr, dma_addr_t addr) +{ +#if (BITS_PER_LONG == 64) + paddr->High = ((unsigned long) addr) >> 32; + paddr->Low = ((unsigned long) addr) & 0xffffffff; +#else + paddr->High = 0; + paddr->Low = (unsigned long) addr; +#endif +} + +void +MM_SetT3Addr(T3_64BIT_HOST_ADDR *paddr, dma_addr_t addr) +{ + unsigned long baddr = (unsigned long) addr; +#if (BITS_PER_LONG == 64) + set_64bit_addr(paddr, baddr & 0xffffffff, baddr >> 32); +#else + set_64bit_addr(paddr, baddr, 0); +#endif +} + +/* + * This combination of `inline' and `extern' has almost the effect of a + * macro. The way to use it is to put a function definition in a header + * file with these keywords, and put another copy of the definition + * (lacking `inline' and `extern') in a library file. The definition in + * the header file will cause most calls to the function to be inlined. + * If any uses of the function remain, they will refer to the single copy + * in the library. + */ +void +atomic_set(atomic_t* entry, int val) +{ + entry->counter = val; +} +int +atomic_read(atomic_t* entry) +{ + return entry->counter; +} +void +atomic_inc(atomic_t* entry) +{ + if(entry) + entry->counter++; +} + +void +atomic_dec(atomic_t* entry) +{ + if(entry) + entry->counter--; +} + +void +atomic_sub(int a, atomic_t* entry) +{ + if(entry) + entry->counter -= a; +} + +void +atomic_add(int a, atomic_t* entry) +{ + if(entry) + entry->counter += a; +} + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +void +QQ_InitQueue( +PQQ_CONTAINER pQueue, +unsigned int QueueSize) { + pQueue->Head = 0; + pQueue->Tail = 0; + pQueue->Size = QueueSize+1; + atomic_set(&pQueue->EntryCnt, 0); +} /* QQ_InitQueue */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +char +QQ_Full( +PQQ_CONTAINER pQueue) { + unsigned int NewHead; + + NewHead = (pQueue->Head + 1) % pQueue->Size; + + return(NewHead == pQueue->Tail); +} /* QQ_Full */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +char +QQ_Empty( +PQQ_CONTAINER pQueue) { + return(pQueue->Head == pQueue->Tail); +} /* QQ_Empty */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +unsigned int +QQ_GetSize( +PQQ_CONTAINER pQueue) { + return pQueue->Size; +} /* QQ_GetSize */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +unsigned int +QQ_GetEntryCnt( +PQQ_CONTAINER pQueue) { + return atomic_read(&pQueue->EntryCnt); +} /* QQ_GetEntryCnt */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/* TRUE entry was added successfully. */ +/* FALSE queue is full. */ +/******************************************************************************/ +char +QQ_PushHead( +PQQ_CONTAINER pQueue, +PQQ_ENTRY pEntry) { + unsigned int Head; + + Head = (pQueue->Head + 1) % pQueue->Size; + +#if !defined(QQ_NO_OVERFLOW_CHECK) + if(Head == pQueue->Tail) { + return 0; + } /* if */ +#endif /* QQ_NO_OVERFLOW_CHECK */ + + pQueue->Array[pQueue->Head] = pEntry; + wmb(); + pQueue->Head = Head; + atomic_inc(&pQueue->EntryCnt); + + return -1; +} /* QQ_PushHead */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/* TRUE entry was added successfully. */ +/* FALSE queue is full. */ +/******************************************************************************/ +char +QQ_PushTail( +PQQ_CONTAINER pQueue, +PQQ_ENTRY pEntry) { + unsigned int Tail; + + Tail = pQueue->Tail; + if(Tail == 0) { + Tail = pQueue->Size; + } /* if */ + Tail--; + +#if !defined(QQ_NO_OVERFLOW_CHECK) + if(Tail == pQueue->Head) { + return 0; + } /* if */ +#endif /* QQ_NO_OVERFLOW_CHECK */ + + pQueue->Array[Tail] = pEntry; + wmb(); + pQueue->Tail = Tail; + atomic_inc(&pQueue->EntryCnt); + + return -1; +} /* QQ_PushTail */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +PQQ_ENTRY +QQ_PopHead( +PQQ_CONTAINER pQueue) { + unsigned int Head; + PQQ_ENTRY Entry; + + Head = pQueue->Head; + +#if !defined(QQ_NO_UNDERFLOW_CHECK) + if(Head == pQueue->Tail) { + return (PQQ_ENTRY) 0; + } /* if */ +#endif /* QQ_NO_UNDERFLOW_CHECK */ + + if(Head == 0) { + Head = pQueue->Size; + } /* if */ + Head--; + + Entry = pQueue->Array[Head]; + membar(); + + pQueue->Head = Head; + atomic_dec(&pQueue->EntryCnt); + + return Entry; +} /* QQ_PopHead */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +PQQ_ENTRY +QQ_PopTail( +PQQ_CONTAINER pQueue) { + unsigned int Tail; + PQQ_ENTRY Entry; + + Tail = pQueue->Tail; + +#if !defined(QQ_NO_UNDERFLOW_CHECK) + if(Tail == pQueue->Head) { + return (PQQ_ENTRY) 0; + } /* if */ +#endif /* QQ_NO_UNDERFLOW_CHECK */ + + Entry = pQueue->Array[Tail]; + membar(); + pQueue->Tail = (Tail + 1) % pQueue->Size; + atomic_dec(&pQueue->EntryCnt); + + return Entry; +} /* QQ_PopTail */ + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +PQQ_ENTRY +QQ_GetHead( + PQQ_CONTAINER pQueue, + unsigned int Idx) +{ + if(Idx >= atomic_read(&pQueue->EntryCnt)) + { + return (PQQ_ENTRY) 0; + } + + if(pQueue->Head > Idx) + { + Idx = pQueue->Head - Idx; + } + else + { + Idx = pQueue->Size - (Idx - pQueue->Head); + } + Idx--; + + return pQueue->Array[Idx]; +} + + + +/******************************************************************************/ +/* Description: */ +/* */ +/* Return: */ +/******************************************************************************/ +PQQ_ENTRY +QQ_GetTail( + PQQ_CONTAINER pQueue, + unsigned int Idx) +{ + if(Idx >= atomic_read(&pQueue->EntryCnt)) + { + return (PQQ_ENTRY) 0; + } + + Idx += pQueue->Tail; + if(Idx >= pQueue->Size) + { + Idx = Idx - pQueue->Size; + } + + return pQueue->Array[Idx]; +} + +#endif /* CFG_CMD_NET, !CONFIG_NET_MULTI, CONFIG_BCM570x */ |