* Add support for SK98xx driverLABEL_2003_09_06_0055

* Add PCI support for SL8245 board

* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
  or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
  Run IPB at 133 Mhz; adjust the MII clock frequency accordingly

* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16  MHz)
  to allow for more accurate baudrate settings
  (error now 0.7% at 115 kbps, instead of 3.5% before)

* Patch by Andreas Mohr, 4 Sep 2003:
  Fix a lot of spelling errors

1 files changed, 98 insertions, 0 deletions

diff --git a/drivers/sk98lin/u-boot_compat.h b/drivers/sk98lin/u-boot_compat.h
new file mode 100644
index 00000000000..1e385f8ef59
--- /dev/null
+++ b/drivers/sk98lin/u-boot_compat.h
@@ -0,0 +1,98 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _UBOOT_COMPAT_H__
+#define _UBOOT_COMPAT_H__
+
+
+#include <pci.h>
+#include <pci_ids.h>
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+
+#define	__initdata
+#define __init
+#define __exit
+
+#define netif_stop_queue(x)
+#define netif_wake_queue(x)
+#define netif_running(x)		0
+#define unregister_netdev(x)
+#define remove_proc_entry(x,y)
+
+#define dev_addr			enetaddr
+
+#define	spin_lock_irqsave(x,y) y = 0;
+#define spin_lock_init(x)
+#define spin_lock(x)
+#define spin_unlock_irqrestore(x,y)
+#define spin_unlock(x)
+
+
+#define ENODEV				1
+#define EAGAIN				2
+#define EBUSY				3
+
+#define HZ				CFG_HZ
+
+
+#define printk				printf
+#define KERN_ERR
+#define KERN_WARNING
+#define KERN_INFO
+
+#define MOD_INC_USE_COUNT
+#define MOD_DEC_USE_COUNT
+
+
+#define kmalloc(x,y)			malloc(x)
+#define kfree(x)			free(x)
+#define GFP_ATOMIC			0
+
+#define pci_alloc_consistent(x,y,z)	(void *)(*(dma_addr_t *)(z) = (dma_addr_t)malloc(y))
+#define pci_free_consistent(x,y,z,d)	free(z)
+#define pci_dma_sync_single(x,y,z,d)
+#define pci_unmap_page(x,y,z,d)
+#define pci_unmap_single(x,y,z,d)
+#define pci_present()			1
+
+struct sk_buff
+{
+	u8 * data;
+	u32 len;
+	u8 * data_unaligned;
+};
+
+struct sk_buff * alloc_skb(u32 size, int dummy);
+void dev_kfree_skb_any(struct sk_buff *skb);
+void skb_reserve(struct sk_buff *skb, unsigned int len);
+void skb_put(struct sk_buff *skb, unsigned int len);
+
+#define dev_kfree_skb				dev_kfree_skb_any
+#define dev_kfree_skb_irq			dev_kfree_skb_any
+
+#define eth_copy_and_sum(dest,src,len,base)	memcpy(dest->data,src,len);
+
+
+#endif	/* _UBOOT_COMPAT_H__ */