diff options
author | Stefano Babic <sbabic@denx.de> | 2012-11-10 08:05:54 +0100 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2012-11-10 08:05:54 +0100 |
commit | 3e4d27b06d7484040355e22eec2cbce7335d6dab (patch) | |
tree | 9672a2bb2e4ce0edc0ab776ddf0e2ca8e39a5f62 /drivers/serial | |
parent | bad05afe083eec0467220de21683443292c5012e (diff) | |
parent | 59852d03867108217fe88e3bfc3e1e9cedfe63c5 (diff) |
Merge git://git.denx.de/u-boot
Diffstat (limited to 'drivers/serial')
25 files changed, 268 insertions, 1198 deletions
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 3c32f97abbf..5e8b64873d9 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -36,19 +36,14 @@ COBJS-$(CONFIG_MCFUART) += mcfuart.o COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o COBJS-$(CONFIG_SYS_NS16550) += ns16550.o -COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o COBJS-$(CONFIG_S3C64XX) += s3c64xx.o COBJS-$(CONFIG_S5P) += serial_s5p.o COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o -COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o COBJS-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o -COBJS-$(CONFIG_LPC2292_SERIAL) += serial_lpc2292.o -COBJS-$(CONFIG_LH7A40X_SERIAL) += serial_lh7a40x.o COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o COBJS-$(CONFIG_MXC_UART) += serial_mxc.o -COBJS-$(CONFIG_NETARM_SERIAL) += serial_netarm.o COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o COBJS-$(CONFIG_PXA_SERIAL) += serial_pxa.o diff --git a/drivers/serial/altera_jtag_uart.c b/drivers/serial/altera_jtag_uart.c index 654b5019eba..28319baf187 100644 --- a/drivers/serial/altera_jtag_uart.c +++ b/drivers/serial/altera_jtag_uart.c @@ -59,12 +59,6 @@ static void altera_jtag_serial_putc(char c) writel ((unsigned char)c, &jtag->data); } -static void altera_jtag_serial_puts(const char *s) -{ - while (*s != 0) - serial_putc (*s++); -} - static int altera_jtag_serial_tstc(void) { return ( readl (&jtag->control) & NIOS_JTAG_RRDY); @@ -91,7 +85,7 @@ static struct serial_device altera_jtag_serial_drv = { .stop = NULL, .setbrg = altera_jtag_serial_setbrg, .putc = altera_jtag_serial_putc, - .puts = altera_jtag_serial_puts, + .puts = default_serial_puts, .getc = altera_jtag_serial_getc, .tstc = altera_jtag_serial_tstc, }; diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c index 27550ed48db..118cd58ece8 100644 --- a/drivers/serial/altera_uart.c +++ b/drivers/serial/altera_uart.c @@ -82,13 +82,6 @@ static void altera_serial_putc(char c) writel ((unsigned char)c, &uart->txdata); } -static void altera_serial_puts(const char *s) -{ - while (*s != 0) { - serial_putc (*s++); - } -} - static int altera_serial_tstc(void) { return (readl (&uart->status) & NIOS_UART_RRDY); @@ -107,7 +100,7 @@ static struct serial_device altera_serial_drv = { .stop = NULL, .setbrg = altera_serial_setbrg, .putc = altera_serial_putc, - .puts = altera_serial_puts, + .puts = default_serial_puts, .getc = altera_serial_getc, .tstc = altera_serial_tstc, }; diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index 130303129e8..c4d7432efc6 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -86,12 +86,6 @@ static void atmel_serial_putc(char c) writel(c, &usart->thr); } -static void atmel_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static int atmel_serial_getc(void) { atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; @@ -113,7 +107,7 @@ static struct serial_device atmel_serial_drv = { .stop = NULL, .setbrg = atmel_serial_setbrg, .putc = atmel_serial_putc, - .puts = atmel_serial_puts, + .puts = default_serial_puts, .getc = atmel_serial_getc, .tstc = atmel_serial_tstc, }; diff --git a/drivers/serial/lpc32xx_hsuart.c b/drivers/serial/lpc32xx_hsuart.c index 02429b55416..75599165781 100644 --- a/drivers/serial/lpc32xx_hsuart.c +++ b/drivers/serial/lpc32xx_hsuart.c @@ -77,19 +77,13 @@ static int lpc32xx_serial_init(void) return 0; } -static void lpc32xx_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static struct serial_device lpc32xx_serial_drv = { .name = "lpc32xx_serial", .start = lpc32xx_serial_init, .stop = NULL, .setbrg = lpc32xx_serial_setbrg, .putc = lpc32xx_serial_putc, - .puts = lpc32xx_serial_puts, + .puts = default_serial_puts, .getc = lpc32xx_serial_getc, .tstc = lpc32xx_serial_tstc, }; diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index 00a71146911..7e25797661b 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -28,6 +28,8 @@ */ #include <common.h> +#include <serial.h> +#include <linux/compiler.h> #include <asm/immap.h> #include <asm/uart.h> @@ -87,13 +89,6 @@ static void mcf_serial_putc(const char c) uart->utb = c; } -static void mcf_serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - static int mcf_serial_getc(void) { volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE); @@ -136,7 +131,7 @@ static struct serial_device mcf_serial_drv = { .stop = NULL, .setbrg = mcf_serial_setbrg, .putc = mcf_serial_putc, - .puts = mcf_serial_puts, + .puts = default_serial_puts, .getc = mcf_serial_getc, .tstc = mcf_serial_tstc, }; diff --git a/drivers/serial/ns9750_serial.c b/drivers/serial/ns9750_serial.c index cb545c40657..85fc68a0760 100644 --- a/drivers/serial/ns9750_serial.c +++ b/drivers/serial/ns9750_serial.c @@ -100,19 +100,6 @@ static void ns9750_serial_putc(const char c) } /*********************************************************************** - * @Function: serial_puts - * @Return: n/a - * @Descr: writes non-zero string to the FIFO. - ***********************************************************************/ - -static void ns9750_serial_puts(const char *s) -{ - while (*s) { - serial_putc( *s++ ); - } -} - -/*********************************************************************** * @Function: serial_getc * @Return: the character read * @Descr: performs only 8bit accesses to the FIFO. No error handling @@ -215,7 +202,7 @@ static struct serial_device ns9750_serial_drv = { .stop = NULL, .setbrg = ns9750_serial_setbrg, .putc = ns9750_serial_putc, - .puts = ns9750_serial_puts, + .puts = default_serial_puts, .getc = ns9750_serial_getc, .tstc = ns9750_serial_tstc, }; diff --git a/drivers/serial/opencores_yanu.c b/drivers/serial/opencores_yanu.c index 49bccf3a6cd..4ca6ef0b252 100644 --- a/drivers/serial/opencores_yanu.c +++ b/drivers/serial/opencores_yanu.c @@ -161,14 +161,6 @@ static void oc_serial_putc(char c) writel((unsigned char)c, &uart->data); } -static void oc_serial_puts(const char *s) -{ - while (*s != 0) { - serial_putc (*s++); - } -} - - static int oc_serial_tstc(void) { unsigned status ; @@ -195,7 +187,7 @@ static struct serial_device oc_serial_drv = { .stop = NULL, .setbrg = oc_serial_setbrg, .putc = oc_serial_putc, - .puts = oc_serial_puts, + .puts = default_serial_puts, .getc = oc_serial_getc, .tstc = oc_serial_tstc, }; diff --git a/drivers/serial/s3c4510b_uart.c b/drivers/serial/s3c4510b_uart.c deleted file mode 100644 index 423d26e6788..00000000000 --- a/drivers/serial/s3c4510b_uart.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) - * Curt Brune <curt@cucy.com> - * - * (C) Copyright 2004 - * DAVE Srl - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * MODULE: $Id:$ - * Description: UART/Serial interface for Samsung S3C4510B SoC - * Runtime Env: ARM7TDMI - * Change History: - * 03-02-04 Create (Curt Brune) curt@cucy.com - * - */ - -#include <common.h> - -#include <asm/hardware.h> -#include "s3c4510b_uart.h" - -DECLARE_GLOBAL_DATA_PTR; - -static UART *uart; - -/* flush serial input queue. returns 0 on success or negative error - * number otherwise - */ -static int serial_flush_input(void) -{ - volatile u32 tmp; - - /* keep on reading as long as the receiver is not empty */ - while( uart->m_stat.bf.rxReady) { - tmp = uart->m_rx; - } - - return 0; -} - - -/* flush output queue. returns 0 on success or negative error number - * otherwise - */ -static int serial_flush_output(void) -{ - /* wait until the transmitter is no longer busy */ - while( !uart->m_stat.bf.txBufEmpty); - - return 0; -} - - -static void s3c4510b_serial_setbrg(void) -{ - UART_LINE_CTRL ulctrl; - UART_CTRL uctrl; - UART_BAUD_DIV ubd; - - serial_flush_output(); - serial_flush_input(); - - /* control register */ - uctrl.ui = 0x0; - uctrl.bf.rxMode = 0x1; - uctrl.bf.rxIrq = 0x0; - uctrl.bf.txMode = 0x1; - uctrl.bf.DSR = 0x0; - uctrl.bf.sendBreak = 0x0; - uctrl.bf.loopBack = 0x0; - uart->m_ctrl.ui = uctrl.ui; - - /* line control register */ - ulctrl.ui = 0x0; - ulctrl.bf.wordLen = 0x3; /* 8 bit data */ - ulctrl.bf.nStop = 0x0; /* 1 stop bit */ - ulctrl.bf.parity = 0x0; /* no parity */ - ulctrl.bf.clk = 0x0; /* internal clock */ - ulctrl.bf.infra_red = 0x0; /* no infra_red */ - uart->m_lineCtrl.ui = ulctrl.ui; - - ubd.ui = 0x0; - - /* see table on page 10-15 in SAMSUNG S3C4510B manual */ - /* get correct divisor */ - switch(gd->baudrate) { - case 1200: ubd.bf.cnt0 = 1301; break; - case 2400: ubd.bf.cnt0 = 650; break; - case 4800: ubd.bf.cnt0 = 324; break; - case 9600: ubd.bf.cnt0 = 162; break; - case 19200: ubd.bf.cnt0 = 80; break; - case 38400: ubd.bf.cnt0 = 40; break; - case 57600: ubd.bf.cnt0 = 26; break; - case 115200: ubd.bf.cnt0 = 13; break; - } - - uart->m_baudDiv.ui = ubd.ui; - uart->m_baudCnt = 0x0; - uart->m_baudClk = 0x0; - -} - - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - * - */ -static int s3c4510b_serial_init(void) -{ - -#if CONFIG_SERIAL1 == 1 - uart = (UART *)UART0_BASE; -#elif CONFIG_SERIAL1 == 2 - uart = (UART *)UART1_BASE; -#else -#error CONFIG_SERIAL1 not equal to 1 or 2 -#endif - - serial_setbrg (); - - return (0); -} - - -/* - * Output a single byte to the serial port. - */ -static void s3c4510_serial_putc(const char c) -{ - /* wait for room in the transmit FIFO */ - while( !uart->m_stat.bf.txBufEmpty); - - uart->m_tx = c; - - /* - to be polite with serial console add a line feed - to the carriage return character - */ - if (c=='\n') - serial_putc('\r'); -} - -/* - * Test if an input byte is ready from the serial port. Returns non-zero on - * success, 0 otherwise. - */ -static int s3c4510b_serial_tstc(void) -{ - return uart->m_stat.bf.rxReady; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int s3c4510b_serial_getc(void) -{ - int rv; - - for(;;) { - rv = serial_tstc(); - - if (rv) { - return uart->m_rx & 0xFF; - } - } -} - -static void s3c4510b_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } - - /* busy wait for tx complete */ - while ( !uart->m_stat.bf.txComplete); - - /* clear break */ - uart->m_ctrl.bf.sendBreak = 0; - -} - -static struct serial_device s3c4510b_serial_drv = { - .name = "s3c4510b_serial", - .start = s3c4510b_serial_init, - .stop = NULL, - .setbrg = s3c4510b_serial_setbrg, - .putc = s3c4510b_serial_putc, - .puts = s3c4510b_serial_puts, - .getc = s3c4510b_serial_getc, - .tstc = s3c4510b_serial_tstc, -}; - -void s3c4510b_serial_initialize(void) -{ - serial_register(&s3c4510b_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &s3c4510b_serial_drv; -} diff --git a/drivers/serial/s3c4510b_uart.h b/drivers/serial/s3c4510b_uart.h deleted file mode 100644 index b06c76d84a7..00000000000 --- a/drivers/serial/s3c4510b_uart.h +++ /dev/null @@ -1,109 +0,0 @@ -#ifndef __UART_H -#define __UART_H - -/* - * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) - * Curt Brune <curt@cucy.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Description: S3C4510B UART register layout - */ - -/* UART LINE CONTROL register */ -typedef struct __BF_UART_LINE_CTRL { - u32 wordLen: 2; - u32 nStop: 1; - u32 parity: 3; - u32 clk: 1; - u32 infra_red: 1; - u32 unused:24; -} BF_UART_LINE_CTRL; - -typedef union _UART_LINE_CTRL { - u32 ui; - BF_UART_LINE_CTRL bf; -} UART_LINE_CTRL; - -/* UART CONTROL register */ -typedef struct __BF_UART_CTRL { - u32 rxMode: 2; - u32 rxIrq: 1; - u32 txMode: 2; - u32 DSR: 1; - u32 sendBreak: 1; - u32 loopBack: 1; - u32 unused:24; -} BF_UART_CTRL; - -typedef union _UART_CTRL { - u32 ui; - BF_UART_CTRL bf; -} UART_CTRL; - -/* UART STATUS register */ -typedef struct __BF_UART_STAT { - u32 overrun: 1; - u32 parity: 1; - u32 frame: 1; - u32 breakIrq: 1; - u32 DTR: 1; - u32 rxReady: 1; - u32 txBufEmpty: 1; - u32 txComplete: 1; - u32 unused:24; -} BF_UART_STAT; - -typedef union _UART_STAT { - u32 ui; - BF_UART_STAT bf; -} UART_STAT; - -/* UART BAUD_DIV register */ -typedef struct __BF_UART_BAUD_DIV { - u32 cnt1: 4; - u32 cnt0:12; - u32 unused:16; -} BF_UART_BAUD_DIV; - -typedef union _UART_BAUD_DIV { - u32 ui; - BF_UART_BAUD_DIV bf; -} UART_BAUD_DIV; - -/* UART register block */ -typedef struct __UART { - volatile UART_LINE_CTRL m_lineCtrl; - volatile UART_CTRL m_ctrl; - volatile UART_STAT m_stat; - volatile u32 m_tx; - volatile u32 m_rx; - volatile UART_BAUD_DIV m_baudDiv; - volatile u32 m_baudCnt; - volatile u32 m_baudClk; -} UART; - -#define NL 0x0A -#define CR 0x0D -#define BSP 0x08 -#define ESC 0x1B -#define CTRLZ 0x1A -#define RUBOUT 0x7F - -#endif diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c index 9ab8a28d838..f53c2bf003e 100644 --- a/drivers/serial/s3c64xx.c +++ b/drivers/serial/s3c64xx.c @@ -40,8 +40,6 @@ DECLARE_GLOBAL_DATA_PTR; #error "Bad: you didn't configure serial ..." #endif -#define barrier() asm volatile("" ::: "memory") - /* * The coefficient, used to calculate the baudrate on S3C6400 UARTs is * calculated as @@ -166,19 +164,13 @@ static int s3c64xx_serial_tstc(void) return uart->UTRSTAT & 0x1; } -static void s3c64xx_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static struct serial_device s3c64xx_serial_drv = { .name = "s3c64xx_serial", .start = s3c64xx_serial_init, .stop = NULL, .setbrg = s3c64xx_serial_setbrg, .putc = s3c64xx_serial_putc, - .puts = s3c64xx_serial_puts, + .puts = default_serial_puts, .getc = s3c64xx_serial_getc, .tstc = s3c64xx_serial_tstc, }; diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 5bbf3aeb445..f5f43a6ddc0 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -26,16 +26,35 @@ #include <stdio_dev.h> #include <post.h> #include <linux/compiler.h> +#include <errno.h> DECLARE_GLOBAL_DATA_PTR; static struct serial_device *serial_devices; static struct serial_device *serial_current; +/** + * serial_null() - Void registration routine of a serial driver + * + * This routine implements a void registration routine of a serial + * driver. The registration routine of a particular driver is aliased + * to this empty function in case the driver is not compiled into + * U-Boot. + */ static void serial_null(void) { } +/** + * serial_initfunc() - Forward declare of driver registration routine + * @name: Name of the real driver registration routine. + * + * This macro expands onto forward declaration of a driver registration + * routine, which is then used below in serial_initialize() function. + * The declaration is made weak and aliases to serial_null() so in case + * the driver is not compiled in, the function is still declared and can + * be used, but aliases to serial_null() and thus is optimized away. + */ #define serial_initfunc(name) \ void name(void) \ __attribute__((weak, alias("serial_null"))); @@ -77,7 +96,6 @@ serial_initfunc(lpc32xx_serial_initialize); serial_initfunc(mcf_serial_initialize); serial_initfunc(ns9750_serial_initialize); serial_initfunc(oc_serial_initialize); -serial_initfunc(s3c4510b_serial_initialize); serial_initfunc(s3c64xx_serial_initialize); serial_initfunc(sandbox_serial_initialize); serial_initfunc(clps7111_serial_initialize); @@ -85,15 +103,23 @@ serial_initfunc(imx_serial_initialize); serial_initfunc(ixp_serial_initialize); serial_initfunc(ks8695_serial_initialize); serial_initfunc(lh7a40x_serial_initialize); -serial_initfunc(lpc2292_serial_initialize); serial_initfunc(max3100_serial_initialize); serial_initfunc(mxc_serial_initialize); -serial_initfunc(netarm_serial_initialize); serial_initfunc(pl01x_serial_initialize); serial_initfunc(s3c44b0_serial_initialize); serial_initfunc(sa1100_serial_initialize); serial_initfunc(sh_serial_initialize); +/** + * serial_register() - Register serial driver with serial driver core + * @dev: Pointer to the serial driver structure + * + * This function registers the serial driver supplied via @dev with + * serial driver core, thus making U-Boot aware of it and making it + * available for U-Boot to use. On platforms that still require manual + * relocation of constant variables, relocation of the supplied structure + * is performed. + */ void serial_register(struct serial_device *dev) { #ifdef CONFIG_NEEDS_MANUAL_RELOC @@ -117,6 +143,15 @@ void serial_register(struct serial_device *dev) serial_devices = dev; } +/** + * serial_initialize() - Register all compiled-in serial port drivers + * + * This function registers all serial port drivers that are compiled + * into the U-Boot binary with the serial core, thus making them + * available to U-Boot to use. Lastly, this function assigns a default + * serial port to the serial core. That serial port is then used as a + * default output. + */ void serial_initialize(void) { mpc8xx_serial_initialize(); @@ -156,7 +191,6 @@ void serial_initialize(void) mcf_serial_initialize(); ns9750_serial_initialize(); oc_serial_initialize(); - s3c4510b_serial_initialize(); s3c64xx_serial_initialize(); sandbox_serial_initialize(); clps7111_serial_initialize(); @@ -164,10 +198,8 @@ void serial_initialize(void) ixp_serial_initialize(); ks8695_serial_initialize(); lh7a40x_serial_initialize(); - lpc2292_serial_initialize(); max3100_serial_initialize(); mxc_serial_initialize(); - netarm_serial_initialize(); pl01x_serial_initialize(); s3c44b0_serial_initialize(); sa1100_serial_initialize(); @@ -176,6 +208,13 @@ void serial_initialize(void) serial_assign(default_serial_console()->name); } +/** + * serial_stdio_init() - Register serial ports with STDIO core + * + * This function generates a proxy driver for each serial port driver. + * These proxy drivers then register with the STDIO core, making the + * serial drivers available as STDIO devices. + */ void serial_stdio_init(void) { struct stdio_dev dev; @@ -200,20 +239,38 @@ void serial_stdio_init(void) } } +/** + * serial_assign() - Select the serial output device by name + * @name: Name of the serial driver to be used as default output + * + * This function configures the serial output multiplexing by + * selecting which serial device will be used as default. In case + * the STDIO "serial" device is selected as stdin/stdout/stderr, + * the serial device previously configured by this function will be + * used for the particular operation. + * + * Returns 0 on success, negative on error. + */ int serial_assign(const char *name) { struct serial_device *s; for (s = serial_devices; s; s = s->next) { - if (strcmp(s->name, name) == 0) { - serial_current = s; - return 0; - } + if (strcmp(s->name, name)) + continue; + serial_current = s; + return 0; } - return 1; + return -EINVAL; } +/** + * serial_reinit_all() - Reinitialize all compiled-in serial ports + * + * This function reinitializes all serial ports that are compiled + * into U-Boot by calling their serial_start() functions. + */ void serial_reinit_all(void) { struct serial_device *s; @@ -222,60 +279,173 @@ void serial_reinit_all(void) s->start(); } +/** + * get_current() - Return pointer to currently selected serial port + * + * This function returns a pointer to currently selected serial port. + * The currently selected serial port is altered by serial_assign() + * function. + * + * In case this function is called before relocation or before any serial + * port is configured, this function calls default_serial_console() to + * determine the serial port. Otherwise, the configured serial port is + * returned. + * + * Returns pointer to the currently selected serial port on success, + * NULL on error. + */ static struct serial_device *get_current(void) { struct serial_device *dev; - if (!(gd->flags & GD_FLG_RELOC) || !serial_current) { + if (!(gd->flags & GD_FLG_RELOC)) + dev = default_serial_console(); + else if (!serial_current) dev = default_serial_console(); + else + dev = serial_current; - /* We must have a console device */ - if (!dev) { + /* We must have a console device */ + if (!dev) { #ifdef CONFIG_SPL_BUILD - puts("Cannot find console\n"); - hang(); + puts("Cannot find console\n"); + hang(); #else - panic("Cannot find console\n"); + panic("Cannot find console\n"); #endif - } - } else - dev = serial_current; + } + return dev; } +/** + * serial_init() - Initialize currently selected serial port + * + * This function initializes the currently selected serial port. This + * usually involves setting up the registers of that particular port, + * enabling clock and such. This function uses the get_current() call + * to determine which port is selected. + * + * Returns 0 on success, negative on error. + */ int serial_init(void) { return get_current()->start(); } +/** + * serial_setbrg() - Configure baud-rate of currently selected serial port + * + * This function configures the baud-rate of the currently selected + * serial port. The baud-rate is retrieved from global data within + * the serial port driver. This function uses the get_current() call + * to determine which port is selected. + * + * Returns 0 on success, negative on error. + */ void serial_setbrg(void) { get_current()->setbrg(); } +/** + * serial_getc() - Read character from currently selected serial port + * + * This function retrieves a character from currently selected serial + * port. In case there is no character waiting on the serial port, + * this function will block and wait for the character to appear. This + * function uses the get_current() call to determine which port is + * selected. + * + * Returns the character on success, negative on error. + */ int serial_getc(void) { return get_current()->getc(); } +/** + * serial_tstc() - Test if data is available on currently selected serial port + * + * This function tests if one or more characters are available on + * currently selected serial port. This function never blocks. This + * function uses the get_current() call to determine which port is + * selected. + * + * Returns positive if character is available, zero otherwise. + */ int serial_tstc(void) { return get_current()->tstc(); } +/** + * serial_putc() - Output character via currently selected serial port + * @c: Single character to be output from the serial port. + * + * This function outputs a character via currently selected serial + * port. This character is passed to the serial port driver responsible + * for controlling the hardware. The hardware may still be in process + * of transmitting another character, therefore this function may block + * for a short amount of time. This function uses the get_current() + * call to determine which port is selected. + */ void serial_putc(const char c) { get_current()->putc(c); } +/** + * serial_puts() - Output string via currently selected serial port + * @s: Zero-terminated string to be output from the serial port. + * + * This function outputs a zero-terminated string via currently + * selected serial port. This function behaves as an accelerator + * in case the hardware can queue multiple characters for transfer. + * The whole string that is to be output is available to the function + * implementing the hardware manipulation. Transmitting the whole + * string may take some time, thus this function may block for some + * amount of time. This function uses the get_current() call to + * determine which port is selected. + */ void serial_puts(const char *s) { get_current()->puts(s); } +/** + * default_serial_puts() - Output string by calling serial_putc() in loop + * @s: Zero-terminated string to be output from the serial port. + * + * This function outputs a zero-terminated string by calling serial_putc() + * in a loop. Most drivers do not support queueing more than one byte for + * transfer, thus this function precisely implements their serial_puts(). + * + * To optimize the number of get_current() calls, this function only + * calls get_current() once and then directly accesses the putc() call + * of the &struct serial_device . + */ +void default_serial_puts(const char *s) +{ + struct serial_device *dev = get_current(); + while (*s) + dev->putc(*s++); +} + #if CONFIG_POST & CONFIG_SYS_POST_UART static const int bauds[] = CONFIG_SYS_BAUDRATE_TABLE; +/** + * uart_post_test() - Test the currently selected serial port using POST + * @flags: POST framework flags + * + * Do a loopback test of the currently selected serial port. This + * function is only useful in the context of the POST testing framwork. + * The serial port is firstly configured into loopback mode and then + * characters are sent through it. + * + * Returns 0 on success, value otherwise. + */ /* Mark weak until post/cpu/.../uart.c migrate over */ __weak int uart_post_test(int flags) diff --git a/drivers/serial/serial_clps7111.c b/drivers/serial/serial_clps7111.c deleted file mode 100644 index 65473e86080..00000000000 --- a/drivers/serial/serial_clps7111.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <clps7111.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void clps7111_serial_setbrg(void) -{ - unsigned int reg = 0; - - switch (gd->baudrate) { - case 1200: reg = 191; break; - case 9600: reg = 23; break; - case 19200: reg = 11; break; - case 38400: reg = 5; break; - case 57600: reg = 3; break; - case 115200: reg = 1; break; - default: hang (); break; - } - - /* init serial serial 1,2 */ - IO_SYSCON1 = SYSCON1_UART1EN; - IO_SYSCON2 = SYSCON2_UART2EN; - - reg |= UBRLCR_WRDLEN8; - - IO_UBRLCR1 = reg; - IO_UBRLCR2 = reg; -} - - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - * - */ -static int clps7111_serial_init(void) -{ - serial_setbrg (); - - return (0); -} - - -/* - * Output a single byte to the serial port. - */ -static void clps7111_serial_putc(const char c) -{ - int tmo; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc ('\r'); - - tmo = get_timer (0) + 1 * CONFIG_SYS_HZ; - while (IO_SYSFLG1 & SYSFLG1_UTXFF) - if (get_timer (0) > tmo) - break; - - IO_UARTDR1 = c; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int clps7111_serial_tstc(void) -{ - return !(IO_SYSFLG1 & SYSFLG1_URXFE); -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int clps7111_serial_getc(void) -{ - while (IO_SYSFLG1 & SYSFLG1_URXFE); - - return IO_UARTDR1 & 0xff; -} - -static void clps7111_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - -static struct serial_device clps7111_serial_drv = { - .name = "clps7111_serial", - .start = clps7111_serial_init, - .stop = NULL, - .setbrg = clps7111_serial_setbrg, - .putc = clps7111_serial_putc, - .puts = clps7111_serial_puts, - .getc = clps7111_serial_getc, - .tstc = clps7111_serial_tstc, -}; - -void clps7111_serial_initialize(void) -{ - serial_register(&clps7111_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &clps7111_serial_drv; -} diff --git a/drivers/serial/serial_imx.c b/drivers/serial/serial_imx.c index 6c075b5b912..9b9be44c528 100644 --- a/drivers/serial/serial_imx.c +++ b/drivers/serial/serial_imx.c @@ -214,20 +214,13 @@ static int imx_serial_tstc(void) return 1; } -static void imx_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device imx_serial_drv = { .name = "imx_serial", .start = imx_serial_init, .stop = NULL, .setbrg = imx_serial_setbrg, .putc = imx_serial_putc, - .puts = imx_serial_puts, + .puts = default_serial_puts, .getc = imx_serial_getc, .tstc = imx_serial_tstc, }; diff --git a/drivers/serial/serial_ixp.c b/drivers/serial/serial_ixp.c index c8b3658d475..09a3df40162 100644 --- a/drivers/serial/serial_ixp.c +++ b/drivers/serial/serial_ixp.c @@ -121,20 +121,13 @@ static int ixp_serial_getc(void) return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff; } -static void ixp_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device ixp_serial_drv = { .name = "ixp_serial", .start = ixp_serial_init, .stop = NULL, .setbrg = ixp_serial_setbrg, .putc = ixp_serial_putc, - .puts = ixp_serial_puts, + .puts = default_serial_puts, .getc = ixp_serial_getc, .tstc = ixp_serial_tstc, }; diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c index 60e8007201d..8b1c974de93 100644 --- a/drivers/serial/serial_ks8695.c +++ b/drivers/serial/serial_ks8695.c @@ -102,13 +102,6 @@ static int ks8695_serial_tstc(void) return 0; } -static void ks8695_serial_puts(const char *s) -{ - char c; - while ((c = *s++) != 0) - serial_putc(c); -} - static int ks8695_serial_getc(void) { volatile struct ks8695uart *uartp = KS8695_UART_ADDR; @@ -124,7 +117,7 @@ static struct serial_device ks8695_serial_drv = { .stop = NULL, .setbrg = ks8695_serial_setbrg, .putc = ks8695_serial_putc, - .puts = ks8695_serial_puts, + .puts = default_serial_puts, .getc = ks8695_serial_getc, .tstc = ks8695_serial_tstc, }; diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c deleted file mode 100644 index 6c9628581b4..00000000000 --- a/drivers/serial/serial_lh7a40x.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <lh7a40x.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CONSOLE_UART1) -# define UART_CONSOLE 1 -#elif defined(CONFIG_CONSOLE_UART2) -# define UART_CONSOLE 2 -#elif defined(CONFIG_CONSOLE_UART3) -# define UART_CONSOLE 3 -#else -# error "No console configured ... " -#endif - -static void lh7a40x_serial_setbrg(void) -{ - lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE); - int i; - unsigned int reg = 0; - - /* - * userguide 15.1.2.4 - * - * BAUDDIV is (UART_REF_FREQ/(16 X BAUD))-1 - * - * UART_REF_FREQ = external system clock input / 2 (Hz) - * BAUD is desired baudrate (bits/s) - * - * NOTE: we add (divisor/2) to numerator to round for - * more precision - */ - reg = (((get_PLLCLK()/2) + ((16*gd->baudrate)/2)) / (16 * gd->baudrate)) - 1; - uart->brcon = reg; - - for (i = 0; i < 100; i++); -} - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - * - */ -static int lh7a40x_serial_init(void) -{ - lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE); - - /* UART must be enabled before writing to any config registers */ - uart->con |= (UART_EN); - -#ifdef CONFIG_CONSOLE_UART1 - /* infrared disabled */ - uart->con |= UART_SIRD; -#endif - /* loopback disabled */ - uart->con &= ~(UART_LBE); - - /* modem lines and tx/rx polarities */ - uart->con &= ~(UART_MXP | UART_TXP | UART_RXP); - - /* FIFO enable, N81 */ - uart->fcon = (UART_WLEN_8 | UART_FEN | UART_STP2_1); - - /* set baudrate */ - serial_setbrg (); - - /* enable rx interrupt */ - uart->inten |= UART_RI; - - return (0); -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int lh7a40x_serial_getc(void) -{ - lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE); - - /* wait for character to arrive */ - while (uart->status & UART_RXFE); - - return(uart->data & 0xff); -} - -#ifdef CONFIG_HWFLOW -static int hwflow = 0; /* turned off by default */ -int hwflow_onoff(int on) -{ - switch(on) { - case 0: - default: - break; /* return current */ - case 1: - hwflow = 1; /* turn on */ - break; - case -1: - hwflow = 0; /* turn off */ - break; - } - return hwflow; -} -#endif - -#ifdef CONFIG_MODEM_SUPPORT -static int be_quiet = 0; -void disable_putc(void) -{ - be_quiet = 1; -} - -void enable_putc(void) -{ - be_quiet = 0; -} -#endif - - -/* - * Output a single byte to the serial port. - */ -static void lh7a40x_serial_putc(const char c) -{ - lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE); - -#ifdef CONFIG_MODEM_SUPPORT - if (be_quiet) - return; -#endif - - /* wait for room in the tx FIFO */ - while (!(uart->status & UART_TXFE)); - -#ifdef CONFIG_HWFLOW - /* Wait for CTS up */ - while(hwflow && !(uart->status & UART_CTS)); -#endif - - uart->data = c; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc ('\r'); -} - -/* - * Test whether a character is in the RX buffer - */ -static int lh7a40x_serial_tstc(void) -{ - lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE); - - return(!(uart->status & UART_RXFE)); -} - -static void lh7a40x_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - -static struct serial_device lh7a40x_serial_drv = { - .name = "lh7a40x_serial", - .start = lh7a40x_serial_init, - .stop = NULL, - .setbrg = lh7a40x_serial_setbrg, - .putc = lh7a40x_serial_putc, - .puts = lh7a40x_serial_puts, - .getc = lh7a40x_serial_getc, - .tstc = lh7a40x_serial_tstc, -}; - -void lh7a40x_serial_initialize(void) -{ - serial_register(&lh7a40x_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &lh7a40x_serial_drv; -} diff --git a/drivers/serial/serial_lpc2292.c b/drivers/serial/serial_lpc2292.c deleted file mode 100644 index fcab20280ec..00000000000 --- a/drivers/serial/serial_lpc2292.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <asm/arch/hardware.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void lpc2292_serial_setbrg(void) -{ - unsigned short divisor = 0; - - switch (gd->baudrate) { - case 1200: divisor = 3072; break; - case 9600: divisor = 384; break; - case 19200: divisor = 192; break; - case 38400: divisor = 96; break; - case 57600: divisor = 64; break; - case 115200: divisor = 32; break; - default: hang (); break; - } - - /* init serial UART0 */ - PUT8(U0LCR, 0); - PUT8(U0IER, 0); - PUT8(U0LCR, 0x80); /* DLAB=1 */ - PUT8(U0DLL, (unsigned char)(divisor & 0x00FF)); - PUT8(U0DLM, (unsigned char)(divisor >> 8)); - PUT8(U0LCR, 0x03); /* 8N1, DLAB=0 */ - PUT8(U0FCR, 1); /* Enable RX and TX FIFOs */ -} - -static int lpc2292_serial_init(void) -{ - unsigned long pinsel0; - - serial_setbrg (); - - pinsel0 = GET32(PINSEL0); - pinsel0 &= ~(0x00000003); - pinsel0 |= 5; - PUT32(PINSEL0, pinsel0); - - return (0); -} - -static void lpc2292_serial_putc(const char c) -{ - if (c == '\n') - { - while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */ - PUT8(U0THR, '\r'); - } - - while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */ - PUT8(U0THR, c); -} - -static int lpc2292_serial_getc(void) -{ - while((GET8(U0LSR) & 1) == 0); - return GET8(U0RBR); -} - -static void lpc2292_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - -/* Test if there is a byte to read */ -static int lpc2292_serial_tstc(void) -{ - return (GET8(U0LSR) & 1); -} - -static struct serial_device lpc2292_serial_drv = { - .name = "lpc2292_serial", - .start = lpc2292_serial_init, - .stop = NULL, - .setbrg = lpc2292_serial_setbrg, - .putc = lpc2292_serial_putc, - .puts = lpc2292_serial_puts, - .getc = lpc2292_serial_getc, - .tstc = lpc2292_serial_tstc, -}; - -void lpc2292_serial_initialize(void) -{ - serial_register(&lpc2292_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &lpc2292_serial_drv; -} diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index b0612f5aca9..9227d64088c 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -187,13 +187,6 @@ static int mxc_serial_tstc(void) return 1; } -static void mxc_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - /* * Initialise the serial port with the given baudrate. The settings * are always 8 data bits, no parity, 1 stop bit, no start bits. @@ -228,7 +221,7 @@ static struct serial_device mxc_serial_drv = { .stop = NULL, .setbrg = mxc_serial_setbrg, .putc = mxc_serial_putc, - .puts = mxc_serial_puts, + .puts = default_serial_puts, .getc = mxc_serial_getc, .tstc = mxc_serial_tstc, }; diff --git a/drivers/serial/serial_netarm.c b/drivers/serial/serial_netarm.c deleted file mode 100644 index d30adc31838..00000000000 --- a/drivers/serial/serial_netarm.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * Serial Port stuff - taken from Linux - * - * (C) Copyright 2002 - * MAZeT GmbH <www.mazet.de> - * Stephan Linz <linz@mazet.de>, <linz@li-pro.net> - * - * (c) 2004 - * IMMS gGmbH <www.imms.de> - * Thomas Elste <info@elste.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <asm/hardware.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA)) -#if !defined(CONFIG_NETARM_NS7520) -#define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB)) -#else -#define PORTC (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTC)) -#endif - -/* wait until transmitter is ready for another character */ -#define TXWAITRDY(registers) \ -{ \ - ulong tmo = get_timer(0) + 1 * CONFIG_SYS_HZ; \ - while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 ) { \ - if (get_timer(0) > tmo) \ - break; \ - } \ -} - - -volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0); -volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1); - -extern void _netarm_led_FAIL1(void); - -/* - * Setup both serial i/f with given baudrate - */ -static void netarm_serial_setbrg(void) -{ - /* set 0 ... make sure pins are configured for serial */ -#if !defined(CONFIG_NETARM_NS7520) - PORTA = PORTB = - NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); -#else - PORTA = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); - PORTC = NETARM_GEN_PORT_CSF (0xef) | NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); -#endif - - /* first turn em off */ - serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0; - - /* clear match register, we don't need it */ - serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0; - - /* setup bit rate generator and rx buffer gap timer (1 byte only) */ - if ((gd->baudrate >= MIN_BAUD_RATE) - && (gd->baudrate <= MAX_BAUD_RATE)) { - serial_reg_ch1->bitrate = serial_reg_ch2->bitrate = - NETARM_SER_BR_X16 (gd->baudrate); - serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer = - 0; - serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer = - NETARM_SER_RXGAP (gd->baudrate); - } else { - hang (); - } - - /* setup port mode */ - serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b = - ( NETARM_SER_CTLB_RCGT_EN | - NETARM_SER_CTLB_UART_MODE); - serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = - ( NETARM_SER_CTLA_ENABLE | - NETARM_SER_CTLA_P_NONE | - /* see errata */ - NETARM_SER_CTLA_2STOP | - NETARM_SER_CTLA_8BITS | - NETARM_SER_CTLA_DTR_EN | - NETARM_SER_CTLA_RTS_EN); -} - - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - */ -static int netarm_serial_init(void) -{ - serial_setbrg (); - return 0; -} - - -/* - * Output a single byte to the serial port. - */ -static void netarm_serial_putc(const char c) -{ - volatile unsigned char *fifo; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc ('\r'); - - fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo); - TXWAITRDY (serial_reg_ch1); - *fifo = c; -} - -/* - * Test of a single byte from the serial port. Returns 1 on success, 0 - * otherwise. - */ -static int netarm_serial_tstc(void) -{ - return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. - */ -static int netarm_serial_getc(void) -{ - unsigned int ch_uint; - volatile unsigned int *fifo; - volatile unsigned char *fifo_char = NULL; - int buf_count = 0; - - while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY)) - /* NOP */ ; - - fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo); - fifo_char = (unsigned char *) &ch_uint; - ch_uint = *fifo; - - buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a); - switch (buf_count) { - case NETARM_SER_STATA_RXFDB_4BYTES: - buf_count = 4; - break; - case NETARM_SER_STATA_RXFDB_3BYTES: - buf_count = 3; - break; - case NETARM_SER_STATA_RXFDB_2BYTES: - buf_count = 2; - break; - case NETARM_SER_STATA_RXFDB_1BYTES: - buf_count = 1; - break; - default: - /* panic, be never here */ - break; - } - - serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED; - - return ch_uint & 0xff; -} - -static void netarm_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - -static struct serial_device netarm_serial_drv = { - .name = "netarm_serial", - .start = netarm_serial_init, - .stop = NULL, - .setbrg = netarm_serial_setbrg, - .putc = netarm_serial_putc, - .puts = netarm_serial_puts, - .getc = netarm_serial_getc, - .tstc = netarm_serial_tstc, -}; - -void netarm_serial_initialize(void) -{ - serial_register(&netarm_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &netarm_serial_drv; -} diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c index b5d12481ca8..c1c0134bcb3 100644 --- a/drivers/serial/serial_ns16550.c +++ b/drivers/serial/serial_ns16550.c @@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; #if !defined(CONFIG_CONS_INDEX) -#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4) +#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 6) #error "Invalid console index value." #endif @@ -46,12 +46,16 @@ DECLARE_GLOBAL_DATA_PTR; #error "Console port 3 defined but not configured." #elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4) #error "Console port 4 defined but not configured." +#elif CONFIG_CONS_INDEX == 5 && !defined(CONFIG_SYS_NS16550_COM5) +#error "Console port 5 defined but not configured." +#elif CONFIG_CONS_INDEX == 6 && !defined(CONFIG_SYS_NS16550_COM6) +#error "Console port 6 defined but not configured." #endif /* Note: The port number specified in the functions is 1 based. * the array is 0 based. */ -static NS16550_t serial_ports[4] = { +static NS16550_t serial_ports[6] = { #ifdef CONFIG_SYS_NS16550_COM1 (NS16550_t)CONFIG_SYS_NS16550_COM1, #else @@ -68,7 +72,17 @@ static NS16550_t serial_ports[4] = { NULL, #endif #ifdef CONFIG_SYS_NS16550_COM4 - (NS16550_t)CONFIG_SYS_NS16550_COM4 + (NS16550_t)CONFIG_SYS_NS16550_COM4, +#else + NULL, +#endif +#ifdef CONFIG_SYS_NS16550_COM5 + (NS16550_t)CONFIG_SYS_NS16550_COM5, +#else + NULL, +#endif +#ifdef CONFIG_SYS_NS16550_COM6 + (NS16550_t)CONFIG_SYS_NS16550_COM6 #else NULL #endif @@ -78,21 +92,33 @@ static NS16550_t serial_ports[4] = { /* Multi serial device functions */ #define DECLARE_ESERIAL_FUNCTIONS(port) \ - int eserial##port##_init (void) {\ - int clock_divisor; \ - clock_divisor = calc_divisor(serial_ports[port-1]); \ - NS16550_init(serial_ports[port-1], clock_divisor); \ - return(0);}\ - void eserial##port##_setbrg (void) {\ - serial_setbrg_dev(port);}\ - int eserial##port##_getc (void) {\ - return serial_getc_dev(port);}\ - int eserial##port##_tstc (void) {\ - return serial_tstc_dev(port);}\ - void eserial##port##_putc (const char c) {\ - serial_putc_dev(port, c);}\ - void eserial##port##_puts (const char *s) {\ - serial_puts_dev(port, s);} + static int eserial##port##_init(void) \ + { \ + int clock_divisor; \ + clock_divisor = calc_divisor(serial_ports[port-1]); \ + NS16550_init(serial_ports[port-1], clock_divisor); \ + return 0 ; \ + } \ + static void eserial##port##_setbrg(void) \ + { \ + serial_setbrg_dev(port); \ + } \ + static int eserial##port##_getc(void) \ + { \ + return serial_getc_dev(port); \ + } \ + static int eserial##port##_tstc(void) \ + { \ + return serial_tstc_dev(port); \ + } \ + static void eserial##port##_putc(const char c) \ + { \ + serial_putc_dev(port, c); \ + } \ + static void eserial##port##_puts(const char *s) \ + { \ + serial_puts_dev(port, s); \ + } /* Serial device descriptor */ #define INIT_ESERIAL_STRUCTURE(port, __name) { \ @@ -231,6 +257,12 @@ struct serial_device eserial3_device = DECLARE_ESERIAL_FUNCTIONS(4); struct serial_device eserial4_device = INIT_ESERIAL_STRUCTURE(4, "eserial3"); +DECLARE_ESERIAL_FUNCTIONS(5); +struct serial_device eserial5_device = + INIT_ESERIAL_STRUCTURE(5, "eserial4"); +DECLARE_ESERIAL_FUNCTIONS(6); +struct serial_device eserial6_device = + INIT_ESERIAL_STRUCTURE(6, "eserial5"); __weak struct serial_device *default_serial_console(void) { @@ -242,6 +274,10 @@ __weak struct serial_device *default_serial_console(void) return &eserial3_device; #elif CONFIG_CONS_INDEX == 4 return &eserial4_device; +#elif CONFIG_CONS_INDEX == 5 + return &eserial5_device; +#elif CONFIG_CONS_INDEX == 6 + return &eserial6_device; #else #error "Bad CONFIG_CONS_INDEX." #endif @@ -261,4 +297,10 @@ void ns16550_serial_initialize(void) #if defined(CONFIG_SYS_NS16550_COM4) serial_register(&eserial4_device); #endif +#if defined(CONFIG_SYS_NS16550_COM5) + serial_register(&eserial5_device); +#endif +#if defined(CONFIG_SYS_NS16550_COM6) + serial_register(&eserial6_device); +#endif } diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index 7db7b65c3fd..b331be794ba 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -179,13 +179,6 @@ static void pl01x_serial_putc(const char c) pl01x_putc (CONSOLE_PORT, c); } -static void pl01x_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static int pl01x_serial_getc(void) { return pl01x_getc (CONSOLE_PORT); @@ -259,7 +252,7 @@ static struct serial_device pl01x_serial_drv = { .stop = NULL, .setbrg = pl01x_serial_setbrg, .putc = pl01x_serial_putc, - .puts = pl01x_serial_puts, + .puts = default_serial_puts, .getc = pl01x_serial_getc, .tstc = pl01x_serial_tstc, }; diff --git a/drivers/serial/serial_s3c44b0.c b/drivers/serial/serial_s3c44b0.c index a4428e0f473..9cae843088a 100644 --- a/drivers/serial/serial_s3c44b0.c +++ b/drivers/serial/serial_s3c44b0.c @@ -209,20 +209,13 @@ static int s3c44b0_serial_getc(void) } } -static void s3c44b0_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device s3c44b0_serial_drv = { .name = "s3c44b0_serial", .start = s3c44b0_serial_init, .stop = NULL, .setbrg = s3c44b0_serial_setbrg, .putc = s3c44b0_serial_putc, - .puts = s3c44b0_serial_puts, + .puts = default_serial_puts, .getc = s3c44b0_serial_getc, .tstc = s3c44b0_serial_tstc, }; diff --git a/drivers/serial/serial_sa1100.c b/drivers/serial/serial_sa1100.c index c6b34db7c61..3c0f4c59fb4 100644 --- a/drivers/serial/serial_sa1100.c +++ b/drivers/serial/serial_sa1100.c @@ -153,20 +153,13 @@ static int sa1100_serial_getc(void) #endif } -static void sa1100_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device sa1100_serial_drv = { .name = "sa1100_serial", .start = sa1100_serial_init, .stop = NULL, .setbrg = sa1100_serial_setbrg, .putc = sa1100_serial_putc, - .puts = sa1100_serial_puts, + .puts = default_serial_puts, .getc = sa1100_serial_getc, .tstc = sa1100_serial_tstc, }; diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 1ddfc7d87f6..3c931d02127 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -136,13 +136,6 @@ static void sh_serial_putc(const char c) serial_raw_putc(c); } -static void sh_serial_puts(const char *s) -{ - char c; - while ((c = *s++) != 0) - serial_putc(c); -} - static int sh_serial_tstc(void) { return serial_rx_fifo_level() ? 1 : 0; @@ -196,7 +189,7 @@ static struct serial_device sh_serial_drv = { .stop = NULL, .setbrg = sh_serial_setbrg, .putc = sh_serial_putc, - .puts = sh_serial_puts, + .puts = default_serial_puts, .getc = sh_serial_getc, .tstc = sh_serial_tstc, }; |