arm: Remove support for unused s3c64xx

Following the removal of the smdk6400 board, the s3c64xx SoC becomes unused, so
remove associated code. It will still be possible to restore it later from the
Git history if necessary.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>

3 files changed, 0 insertions, 190 deletions

diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index de3f471996..fbc4e97e98 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -35,7 +35,6 @@ COBJS-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o
 COBJS-$(CONFIG_MCFUART) += mcfuart.o
 COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
 COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
-COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
 COBJS-$(CONFIG_S5P) += serial_s5p.o
 COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o
 COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c
deleted file mode 100644
index b590992dc8..0000000000
--- a/drivers/serial/s3c64xx.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <common.h>
-#include <linux/compiler.h>
-#include <serial.h>
-#include <asm/arch/s3c6400.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SERIAL1
-#define UART_NR	S3C64XX_UART0
-
-#elif defined(CONFIG_SERIAL2)
-#define UART_NR	S3C64XX_UART1
-
-#elif defined(CONFIG_SERIAL3)
-#define UART_NR	S3C64XX_UART2
-
-#else
-#error "Bad: you didn't configure serial ..."
-#endif
-
-/*
- * The coefficient, used to calculate the baudrate on S3C6400 UARTs is
- * calculated as
- * C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
- * however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
- * 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
- */
-static const int udivslot[] = {
-	0,
-	0x0080,
-	0x0808,
-	0x0888,
-	0x2222,
-	0x4924,
-	0x4a52,
-	0x54aa,
-	0x5555,
-	0xd555,
-	0xd5d5,
-	0xddd5,
-	0xdddd,
-	0xdfdd,
-	0xdfdf,
-	0xffdf,
-};
-
-static void s3c64xx_serial_setbrg(void)
-{
-	s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR);
-	u32 pclk = get_PCLK();
-	u32 baudrate = gd->baudrate;
-	int i;
-
-	i = (pclk / baudrate) % 16;
-
-	uart->UBRDIV = pclk / baudrate / 16 - 1;
-	uart->UDIVSLOT = udivslot[i];
-
-	for (i = 0; i < 100; i++)
-		barrier();
-}
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- */
-static int s3c64xx_serial_init(void)
-{
-	s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR);
-
-	/* reset and enable FIFOs, set triggers to the maximum */
-	uart->UFCON = 0xff;
-	uart->UMCON = 0;
-	/* 8N1 */
-	uart->ULCON = 3;
-	/* No interrupts, no DMA, pure polling */
-	uart->UCON = 5;
-
-	serial_setbrg();
-
-	return 0;
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int s3c64xx_serial_getc(void)
-{
-	s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR);
-
-	/* wait for character to arrive */
-	while (!(uart->UTRSTAT & 0x1));
-
-	return uart->URXH & 0xff;
-}
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int be_quiet;
-void disable_putc(void)
-{
-	be_quiet = 1;
-}
-
-void enable_putc(void)
-{
-	be_quiet = 0;
-}
-#endif
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void s3c64xx_serial_putc(const char c)
-{
-	s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR);
-
-#ifdef CONFIG_MODEM_SUPPORT
-	if (be_quiet)
-		return;
-#endif
-
-	/* wait for room in the tx FIFO */
-	while (!(uart->UTRSTAT & 0x2));
-
-	uart->UTXH = c;
-
-	/* If \n, also do \r */
-	if (c == '\n')
-		serial_putc('\r');
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-static int s3c64xx_serial_tstc(void)
-{
-	s3c64xx_uart *const uart = s3c64xx_get_base_uart(UART_NR);
-
-	return uart->UTRSTAT & 0x1;
-}
-
-static struct serial_device s3c64xx_serial_drv = {
-	.name	= "s3c64xx_serial",
-	.start	= s3c64xx_serial_init,
-	.stop	= NULL,
-	.setbrg	= s3c64xx_serial_setbrg,
-	.putc	= s3c64xx_serial_putc,
-	.puts	= default_serial_puts,
-	.getc	= s3c64xx_serial_getc,
-	.tstc	= s3c64xx_serial_tstc,
-};
-
-void s3c64xx_serial_initialize(void)
-{
-	serial_register(&s3c64xx_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &s3c64xx_serial_drv;
-}
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 7922bf0669..9f04643551 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -165,7 +165,6 @@ serial_initfunc(atmel_serial_initialize);
 serial_initfunc(lpc32xx_serial_initialize);
 serial_initfunc(mcf_serial_initialize);
 serial_initfunc(oc_serial_initialize);
-serial_initfunc(s3c64xx_serial_initialize);
 serial_initfunc(sandbox_serial_initialize);
 serial_initfunc(clps7111_serial_initialize);
 serial_initfunc(imx_serial_initialize);
@@ -259,7 +258,6 @@ void serial_initialize(void)
 	lpc32xx_serial_initialize();
 	mcf_serial_initialize();
 	oc_serial_initialize();
-	s3c64xx_serial_initialize();
 	sandbox_serial_initialize();
 	clps7111_serial_initialize();
 	imx_serial_initialize();