Merge git://git.denx.de/u-boot-dm

Conflicts:
	drivers/serial/serial-uclass.c

Signed-off-by: Tom Rini <trini@ti.com>

1 files changed, 74 insertions, 3 deletions

diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index 0f019c8f50..b09053f140 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -6,6 +6,7 @@
 
 #include <common.h>
 #include <dm.h>
+#include <environment.h>
 #include <errno.h>
 #include <fdtdec.h>
 #include <os.h>
@@ -19,6 +20,11 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/*
+ * Table with supported baudrates (defined in config_xyz.h)
+ */
+static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
+
 #ifndef CONFIG_SYS_MALLOC_F_LEN
 #error "Serial is required before relocation - define CONFIG_SYS_MALLOC_F_LEN to make this work"
 #endif
@@ -160,10 +166,12 @@ void serial_stdio_init(void)
 {
 }
 
+#ifdef CONFIG_DM_STDIO
 static void serial_stub_putc(struct stdio_dev *sdev, const char ch)
 {
 	_serial_putc(sdev->priv, ch);
 }
+#endif
 
 void serial_stub_puts(struct stdio_dev *sdev, const char *str)
 {
@@ -180,11 +188,74 @@ int serial_stub_tstc(struct stdio_dev *sdev)
 	return _serial_tstc(sdev->priv);
 }
 
+/**
+ * on_baudrate() - Update the actual baudrate when the env var changes
+ *
+ * This will check for a valid baudrate and only apply it if valid.
+ */
+static int on_baudrate(const char *name, const char *value, enum env_op op,
+	int flags)
+{
+	int i;
+	int baudrate;
+
+	switch (op) {
+	case env_op_create:
+	case env_op_overwrite:
+		/*
+		 * Switch to new baudrate if new baudrate is supported
+		 */
+		baudrate = simple_strtoul(value, NULL, 10);
+
+		/* Not actually changing */
+		if (gd->baudrate == baudrate)
+			return 0;
+
+		for (i = 0; i < ARRAY_SIZE(baudrate_table); ++i) {
+			if (baudrate == baudrate_table[i])
+				break;
+		}
+		if (i == ARRAY_SIZE(baudrate_table)) {
+			if ((flags & H_FORCE) == 0)
+				printf("## Baudrate %d bps not supported\n",
+				       baudrate);
+			return 1;
+		}
+		if ((flags & H_INTERACTIVE) != 0) {
+			printf("## Switch baudrate to %d bps and press ENTER ...\n",
+			       baudrate);
+			udelay(50000);
+		}
+
+		gd->baudrate = baudrate;
+
+		serial_setbrg();
+
+		udelay(50000);
+
+		if ((flags & H_INTERACTIVE) != 0)
+			while (1) {
+				if (getc() == '\r')
+					break;
+			}
+
+		return 0;
+	case env_op_delete:
+		printf("## Baudrate may not be deleted\n");
+		return 1;
+	default:
+		return 0;
+	}
+}
+U_BOOT_ENV_CALLBACK(baudrate, on_baudrate);
+
 static int serial_post_probe(struct udevice *dev)
 {
-	struct stdio_dev sdev;
 	struct dm_serial_ops *ops = serial_get_ops(dev);
+#ifdef CONFIG_DM_STDIO
 	struct serial_dev_priv *upriv = dev->uclass_priv;
+	struct stdio_dev sdev;
+#endif
 	int ret;
 
 	/* Set the baud rate */
@@ -194,9 +265,9 @@ static int serial_post_probe(struct udevice *dev)
 			return ret;
 	}
 
+#ifdef CONFIG_DM_STDIO
 	if (!(gd->flags & GD_FLG_RELOC))
 		return 0;
-
 	memset(&sdev, '\0', sizeof(sdev));
 
 	strncpy(sdev.name, dev->name, sizeof(sdev.name));
@@ -207,7 +278,7 @@ static int serial_post_probe(struct udevice *dev)
 	sdev.getc = serial_stub_getc;
 	sdev.tstc = serial_stub_tstc;
 	stdio_register_dev(&sdev, &upriv->sdev);
-
+#endif
 	return 0;
 }