diff options
| author | Chen-Yu Tsai <wens@csie.org> | 2016-03-30 00:26:48 +0800 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2016-03-31 17:03:58 +0200 |
| commit | 38491d9c6515eafd97d881cab0420652f07d92a5 (patch) | |
| tree | 43c2174a8b6f4ecde4a85d96271b0ede5d57f20d /drivers/power/Kconfig | |
| parent | 4c6a9ca103f953b6e5e6dfcd56fb558e61ca3c05 (diff) | |
power: axp818: Add support for FLDOs
The FLDOs on AXP818 PMIC normally provide power to CPUS and USB HSIC PHY
on the A83T/H8.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'drivers/power/Kconfig')
| -rw-r--r-- | drivers/power/Kconfig | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 548fe2617d..937b9aa246 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -238,6 +238,33 @@ config AXP_ELDO3_VOLT 1.2V for the SSD2828 chip (converter of parallel LCD interface into MIPI DSI). +config AXP_FLDO1_VOLT + int "axp pmic fldo1 voltage" + depends on AXP818_POWER + default 0 if MACH_SUN8I_A83T + ---help--- + Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to + disable fldo1. + On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is + used. + +config AXP_FLDO2_VOLT + int "axp pmic eldo2 voltage" + depends on AXP818_POWER + default 900 if MACH_SUN8I_A83T + ---help--- + Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to + disable fldo2. + On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V. + +config AXP_FLDO3_VOLT + int "axp pmic fldo3 voltage" + depends on AXP818_POWER + default 0 + ---help--- + Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to + disable fldo3. + config SY8106A_VOUT1_VOLT int "SY8106A pmic VOUT1 voltage" depends on SY8106A_POWER |